Граф коммитов

42577 Коммитов

Автор SHA1 Сообщение Дата
Ilya Dryomov 43d1c0eb7e block: detach bdev inode from its wb in __blkdev_put()
Since 52ebea749a ("writeback: make backing_dev_info host
cgroup-specific bdi_writebacks") inode, at some point in its lifetime,
gets attached to a wb (struct bdi_writeback).  Detaching happens on
evict, in inode_detach_wb() called from __destroy_inode(), and involves
updating wb.

However, detaching an internal bdev inode from its wb in
__destroy_inode() is too late.  Its bdi and by extension root wb are
embedded into struct request_queue, which has different lifetime rules
and can be freed long before the final bdput() is called (can be from
__fput() of a corresponding /dev inode, through dput() - evict() -
bd_forget().  bdevs hold onto the underlying disk/queue pair only while
opened; as soon as bdev is closed all bets are off.  In fact,
disk/queue can be gone before __blkdev_put() even returns:

1499 static void __blkdev_put(struct block_device *bdev, fmode_t mode, int for_part)
1500 {
...
1518         if (bdev->bd_contains == bdev) {
1519                 if (disk->fops->release)
1520                         disk->fops->release(disk, mode);

[ Driver puts its references to disk/queue ]

1521         }
1522         if (!bdev->bd_openers) {
1523                 struct module *owner = disk->fops->owner;
1524
1525                 disk_put_part(bdev->bd_part);
1526                 bdev->bd_part = NULL;
1527                 bdev->bd_disk = NULL;
1528                 if (bdev != bdev->bd_contains)
1529                         victim = bdev->bd_contains;
1530                 bdev->bd_contains = NULL;
1531
1532                 put_disk(disk);

[ We put ours, the queue is gone
  The last bdput() would result in a write to invalid memory ]

1533                 module_put(owner);
...
1539 }

Since bdev inodes are special anyway, detach them in __blkdev_put()
after clearing inode's dirty bits, turning the problematic
inode_detach_wb() in __destroy_inode() into a noop.

add_disk() grabs its disk->queue since 523e1d399c ("block: make
gendisk hold a reference to its queue"), so the old ->release comment
is removed in favor of the new inode_detach_wb() comment.

Cc: stable@vger.kernel.org # 4.2+, needs backporting
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Tested-by: Raghavendra K T <raghavendra.kt@linux.vnet.ibm.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-12-04 11:02:17 -07:00
Linus Torvalds 071f5d105a Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Pull networking fixes from David Miller:
 "A lot of Thanksgiving turkey leftovers accumulated, here goes:

   1) Fix bluetooth l2cap_chan object leak, from Johan Hedberg.

   2) IDs for some new iwlwifi chips, from Oren Givon.

   3) Fix rtlwifi lockups on boot, from Larry Finger.

   4) Fix memory leak in fm10k, from Stephen Hemminger.

   5) We have a route leak in the ipv6 tunnel infrastructure, fix from
      Paolo Abeni.

   6) Fix buffer pointer handling in arm64 bpf JIT,f rom Zi Shen Lim.

   7) Wrong lockdep annotations in tcp md5 support, fix from Eric
      Dumazet.

   8) Work around some middle boxes which prevent proper handling of TCP
      Fast Open, from Yuchung Cheng.

   9) TCP repair can do huge kmalloc() requests, build paged SKBs
      instead.  From Eric Dumazet.

  10) Fix msg_controllen overflow in scm_detach_fds, from Daniel
      Borkmann.

  11) Fix device leaks on ipmr table destruction in ipv4 and ipv6, from
      Nikolay Aleksandrov.

  12) Fix use after free in epoll with AF_UNIX sockets, from Rainer
      Weikusat.

  13) Fix double free in VRF code, from Nikolay Aleksandrov.

  14) Fix skb leaks on socket receive queue in tipc, from Ying Xue.

  15) Fix ifup/ifdown crach in xgene driver, from Iyappan Subramanian.

  16) Fix clearing of persistent array maps in bpf, from Daniel
      Borkmann.

  17) In TCP, for the cross-SYN case, we don't initialize tp->copied_seq
      early enough.  From Eric Dumazet.

  18) Fix out of bounds accesses in bpf array implementation when
      updating elements, from Daniel Borkmann.

  19) Fill gaps in RCU protection of np->opt in ipv6 stack, from Eric
      Dumazet.

  20) When dumping proxy neigh entries, we have to accomodate NULL
      device pointers properly, from Konstantin Khlebnikov.

  21) SCTP doesn't release all ipv6 socket resources properly, fix from
      Eric Dumazet.

  22) Prevent underflows of sch->q.qlen for multiqueue packet
      schedulers, also from Eric Dumazet.

  23) Fix MAC and unicast list handling in bnxt_en driver, from Jeffrey
      Huang and Michael Chan.

  24) Don't actively scan radar channels, from Antonio Quartulli"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (110 commits)
  net: phy: reset only targeted phy
  bnxt_en: Setup uc_list mac filters after resetting the chip.
  bnxt_en: enforce proper storing of MAC address
  bnxt_en: Fixed incorrect implementation of ndo_set_mac_address
  net: lpc_eth: remove irq > NR_IRQS check from probe()
  net_sched: fix qdisc_tree_decrease_qlen() races
  openvswitch: fix hangup on vxlan/gre/geneve device deletion
  ipv4: igmp: Allow removing groups from a removed interface
  ipv6: sctp: implement sctp_v6_destroy_sock()
  arm64: bpf: add 'store immediate' instruction
  ipv6: kill sk_dst_lock
  ipv6: sctp: add rcu protection around np->opt
  net/neighbour: fix crash at dumping device-agnostic proxy entries
  sctp: use GFP_USER for user-controlled kmalloc
  sctp: convert sack_needed and sack_generation to bits
  ipv6: add complete rcu protection around np->opt
  bpf: fix allocation warnings in bpf maps and integer overflow
  mvebu: dts: enable IP checksum with jumbo frames for Armada 38x on Port0
  net: mvneta: enable setting custom TX IP checksum limit
  net: mvneta: fix error path for building skb
  ...
2015-12-03 16:02:46 -08:00
Linus Torvalds 2873d32ff4 Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
 "A collection of fixes from this series.  The most important here is a
  regression fix for an issue that some folks would hit in blk-merge.c,
  and the NVMe queue depth limit for the screwed up Apple "nvme"
  controller.

  In more detail, this pull request contains:

   - a set of fixes for null_blk, including a fix for a few corner cases
     where we could hang the device.  From Arianna and Paolo.

   - lightnvm:
        - A build improvement from Keith.
        - Update the qemu pci id detection from Matias.
        - Error handling fixes for leaks and other little fixes from
          Sudip and Wenwei.

   - fix from Eric where BLKRRPART would not return EBUSY for whole
     device mounts, only when partitions were mounted.

   - fix from Jan Kara, where EOF O_DIRECT reads would return
     negatively.

   - remove check for rq_mergeable() when checking limits for cloned
     requests.  The check doesn't make any sense.  It's assuming that
     since NOMERGE is set on the request that we don't have to
     recalculate limits since the request didn't change, but that's not
     true if the request has been redirected.  From Hannes.

   - correctly get the bio front segment value set for single segment
     bio's, fixing a BUG() in blk-merge.  From Ming"

* 'for-linus' of git://git.kernel.dk/linux-block:
  nvme: temporary fix for Apple controller reset
  null_blk: change type of completion_nsec to unsigned long
  null_blk: guarantee device restart in all irq modes
  null_blk: set a separate timer for each command
  blk-merge: fix computing bio->bi_seg_front_size in case of single segment
  direct-io: Fix negative return from dio read beyond eof
  block: Always check queue limits for cloned requests
  lightnvm: missing nvm_lock acquire
  lightnvm: unconverted ppa returned in get_bb_tbl
  lightnvm: refactor and change vendor id for qemu
  lightnvm: do device max sectors boundary check first
  lightnvm: fix ioctl memory leaks
  lightnvm: free memory when gennvm register fails
  lightnvm: Simplify config when disabled
  Return EBUSY from BLKRRPART for mounted whole-dev fs
2015-12-03 15:45:16 -08:00
Eric Dumazet 9cd3e072b0 net: rename SOCK_ASYNC_NOSPACE and SOCK_ASYNC_WAITDATA
This patch is a cleanup to make following patch easier to
review.

Goal is to move SOCK_ASYNC_NOSPACE and SOCK_ASYNC_WAITDATA
from (struct socket)->flags to a (struct socket_wq)->flags
to benefit from RCU protection in sock_wake_async()

To ease backports, we rename both constants.

Two new helpers, sk_set_bit(int nr, struct sock *sk)
and sk_clear_bit(int net, struct sock *sk) are added so that
following patch can change their implementation.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-12-01 15:45:05 -05:00
Jan Kara 74cedf9b6c direct-io: Fix negative return from dio read beyond eof
Assume a filesystem with 4KB blocks. When a file has size 1000 bytes and
we issue direct IO read at offset 1024, blockdev_direct_IO() reads the
tail of the last block and the logic for handling short DIO reads in
dio_complete() results in a return value -24 (1000 - 1024) which
obviously confuses userspace.

Fix the problem by bailing out early once we sample i_size and can
reliably check that direct IO read starts beyond i_size.

Reported-by: Avi Kivity <avi@scylladb.com>
Fixes: 9fe55eea7e
CC: stable@vger.kernel.org
CC: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
2015-11-30 10:15:42 -07:00
Linus Torvalds 8003a57356 NFS client bugfixes for Linux 4.4
Highlights include:
 
 Stable patches:
 - Fix a NFSv4 callback identifier leak that was also causing client crashes
 - Fix NFSv4 callback decoding issues when incoming requests are truncated
 - Don't declare the attribute cache valid when we call nfs_update_inode with
   an empty attribute structure.
 - Resend LAYOUTGET when there is a race that changes the seqid
 
 Bugfixes:
 - Fix a number of issues with the NFSv4.2 CLONE ioctl()
 - Properly set NFS v4.2 NFSDBG_FACILITY
 - NFSv4 referrals are broken; Cleanup FATTR4_WORD0_FS_LOCATIONS after
   decoding success
 - Use sliding delay when LAYOUTGET gets NFS4ERR_DELAY
 - Ensure that attrcache is revalidated after a SETATTR
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWWPeyAAoJEGcL54qWCgDy9/UQAKNTF09OeHxSqO7oXbM4x0hY
 8a8A4ostTshtu4g6OWxeqI4/89A5lOcdHAoM/KOr+2HzssKA6B9lU4+pzcKfFI+U
 d9WqKVEC3MZA1N4KR+fS5LhtQU62izGKH+CQ9+tHvvesZu+bIiQgQu/uMzKVh2Al
 cKdDu99UxrxNP3PFDCcBtxpBvy27akT+21P8RutG12tqGQkfa1715JIQl9bqgquY
 ZruukMsqamp+LbZlnowgvoaBLBVUo19v8zwI34uSfXwNbQS71xmAV52z7HVHaEFt
 A8HQzS/MaFtMKpq7HOZYEnHB6h8YaYTK4GmHcCCFXHtjXopvHo8LXA6vYLTNhJ8V
 SvLpUJzUWVcGDDQ75x6iX/APPMSq0gxJA4+AZryBer3k2EvKlUoRrP+hgxOIK7HT
 2joWoFFKVe8a5NBj4Pd5+x6dpDEnIvlqGdMQNuXFUiPvcA/l3Uc0gnWhauuqvrhy
 ePrLRcWoSikLlPWxq39DRzJjQUdyUhBWMcCRWkhNzsT6U6HDSip5j0BkUBXD7nlU
 FK9BM2zRHr7kQ5Aax497K9qJNZBWI94y/vFkR/hJg0Z/bVQBF45lGxGgNFbj8Kag
 gR/xcYC9plum1IFD7DcnVnJTxrDSftIsLS8bhjmknxC8Pcyur2jegZvoDXiFk1GF
 gXERq36Ej/4WyyGrNyWm
 =5aPD
 -----END PGP SIGNATURE-----

Merge tag 'nfs-for-4.4-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client bugfixes from Trond Myklebust:
 "Highlights include:

  Stable patches:
   - Fix a NFSv4 callback identifier leak that was also causing client
     crashes
   - Fix NFSv4 callback decoding issues when incoming requests are
     truncated
   - Don't declare the attribute cache valid when we call
     nfs_update_inode with an empty attribute structure.
   - Resend LAYOUTGET when there is a race that changes the seqid

  Bugfixes:
   - Fix a number of issues with the NFSv4.2 CLONE ioctl()
   - Properly set NFS v4.2 NFSDBG_FACILITY
   - NFSv4 referrals are broken; Cleanup FATTR4_WORD0_FS_LOCATIONS after
     decoding success
   - Use sliding delay when LAYOUTGET gets NFS4ERR_DELAY
   - Ensure that attrcache is revalidated after a SETATTR"

* tag 'nfs-for-4.4-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  nfs4: resend LAYOUTGET when there is a race that changes the seqid
  nfs: if we have no valid attrs, then don't declare the attribute cache valid
  nfs: ensure that attrcache is revalidated after a SETATTR
  nfs4: limit callback decoding to received bytes
  nfs4: start callback_ident at idr 1
  nfs: use sliding delay when LAYOUTGET gets NFS4ERR_DELAY
  NFS4: Cleanup FATTR4_WORD0_FS_LOCATIONS after decoding success
  NFS: Properly set NFS v4.2 NFSDBG_FACILITY
  nfs: reduce the amount of ifdefs for v4.2 in nfs4file.c
  nfs: use btrfs ioctl defintions for clone
  nfs: allow intra-file CLONE
  nfs: offer native ioctls even if CONFIG_COMPAT is set
  nfs: pass on count for CLONE operations
2015-11-27 17:22:47 -08:00
Linus Torvalds 80e0c505b2 Merge branch 'for-linus-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
 "This has Mark Fasheh's patches to fix quota accounting during subvol
  deletion, which we've been working on for a while now.  The patch is
  pretty small but it's a key fix.

  Otherwise it's a random assortment"

* 'for-linus-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  btrfs: fix balance range usage filters in 4.4-rc
  btrfs: qgroup: account shared subtree during snapshot delete
  Btrfs: use btrfs_get_fs_root in resolve_indirect_ref
  btrfs: qgroup: fix quota disable during rescan
  Btrfs: fix race between cleaner kthread and space cache writeout
  Btrfs: fix scrub preventing unused block groups from being deleted
  Btrfs: fix race between scrub and block group deletion
  btrfs: fix rcu warning during device replace
  btrfs: Continue replace when set_block_ro failed
  btrfs: fix clashing number of the enhanced balance usage filter
  Btrfs: fix the number of transaction units needed to remove a block group
  Btrfs: use global reserve when deleting unused block group after ENOSPC
  Btrfs: tests: checking for NULL instead of IS_ERR()
  btrfs: fix signed overflows in btrfs_sync_file
2015-11-27 15:45:45 -08:00
Jeff Layton 4f2e9dce0c nfs4: resend LAYOUTGET when there is a race that changes the seqid
pnfs_layout_process will check the returned layout stateid against what
the kernel has in-core. If it turns out that the stateid we received is
older, then we should resend the LAYOUTGET instead of falling back to
MDS I/O.

Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Cc: stable@vger.kernel.org # 3.18+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-11-25 15:32:13 -05:00
Jeff Layton c812012f9c nfs: if we have no valid attrs, then don't declare the attribute cache valid
If we pass in an empty nfs_fattr struct to nfs_update_inode, it will
(correctly) not update any of the attributes, but it then clears the
NFS_INO_INVALID_ATTR flag, which indicates that the attributes are
up to date. Don't clear the flag if the fattr struct has no valid
attrs to apply.

Reviewed-by: Steve French <steve.french@primarydata.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-11-25 15:31:49 -05:00
Jeff Layton 616c319683 nfs: ensure that attrcache is revalidated after a SETATTR
If we get no post-op attributes back from a SETATTR operation, then no
attributes will of course be updated during the call to
nfs_update_inode.

We know however that the attributes are invalid at that point, since we
just changed some of them. At the very least, the ctime will be bogus.
If we get no post-op attributes back on the call, mark the attrcache
invalid to reflect that fact.

Reviewed-by: Steve French <steve.french@primarydata.com>
Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-11-25 15:24:30 -05:00
Holger Hoffstätte dba72cb30b btrfs: fix balance range usage filters in 4.4-rc
There's a regression in 4.4-rc since commit bc3094673f
(btrfs: extend balance filter usage to take minimum and maximum) in that
existing (non-ranged) balance with -dusage=x no longer works; all chunks
are skipped.

After staring at the code for a while and wondering why a non-ranged
balance would even need min and max thresholds (..which then were not
set correctly, leading to the bug) I realized that the only problem
was the fact that the filter functions were named wrong, thanks to
patching copypasta. Simply renaming both functions lets the existing
btrfs-progs call balance with -dusage=x and now the non-ranged filter
function is invoked, properly using only a single chunk limit.

Signed-off-by: Holger Hoffstätte <holger.hoffstaette@googlemail.com>
Fixes: bc3094673f ("btrfs: extend balance filter usage to take minimum and maximum")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-11-25 05:27:33 -08:00
Mark Fasheh 82bd101b52 btrfs: qgroup: account shared subtree during snapshot delete
Commit 0ed4792 ('btrfs: qgroup: Switch to new extent-oriented qgroup
mechanism.') removed our qgroup accounting during
btrfs_drop_snapshot(). Predictably, this results in qgroup numbers
going bad shortly after a snapshot is removed.

Fix this by adding a dirty extent record when we encounter extents during
our shared subtree walk. This effectively restores the functionality we had
with the original shared subtree walking code in 1152651 (btrfs: qgroup:
account shared subtrees during snapshot delete).

The idea with the original patch (and this one) is that shared subtrees can
get skipped during drop_snapshot. The shared subtree walk then allows us a
chance to visit those extents and add them to the qgroup work for later
processing. This ultimately makes the accounting for drop snapshot work.

The new qgroup code nicely handles all the other extents during the tree
walk via the ref dec/inc functions so we don't have to add actions beyond
what we had originally.

Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: Chris Mason <clm@fb.com>
2015-11-25 05:27:33 -08:00
Josef Bacik 2d9e977610 Btrfs: use btrfs_get_fs_root in resolve_indirect_ref
The backref code will look up the fs_root we're trying to resolve our indirect
refs for, unfortunately we use btrfs_read_fs_root_no_name, which returns -ENOENT
if the ref is 0.  This isn't helpful for the qgroup stuff with snapshot delete
as it won't be able to search down the snapshot we are deleting, which will
cause us to miss roots.  So use btrfs_get_fs_root and send false for check_ref
so we can always get the root we're looking for.  Thanks,

Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Mark Fasheh <mfasheh@suse.de>
Signed-off-by: Chris Mason <clm@fb.com>
2015-11-25 05:22:08 -08:00
Justin Maggard 967ef5131e btrfs: qgroup: fix quota disable during rescan
There's a race condition that leads to a NULL pointer dereference if you
disable quotas while a quota rescan is running.  To fix this, we just need
to wait for the quota rescan worker to actually exit before tearing down
the quota structures.

Signed-off-by: Justin Maggard <jmaggard@netgear.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-11-25 05:22:08 -08:00
Filipe Manana 036a9348dc Btrfs: fix race between cleaner kthread and space cache writeout
When a block group becomes unused and the cleaner kthread is currently
running, we can end up getting the current transaction aborted with error
-ENOENT when we try to commit the transaction, leading to the following
trace:

  [59779.258768] WARNING: CPU: 3 PID: 5990 at fs/btrfs/extent-tree.c:3740 btrfs_write_dirty_block_groups+0x17c/0x214 [btrfs]()
  [59779.272594] BTRFS: Transaction aborted (error -2)
  (...)
  [59779.291137] Call Trace:
  [59779.291621]  [<ffffffff812566f4>] dump_stack+0x4e/0x79
  [59779.292543]  [<ffffffff8104d0a6>] warn_slowpath_common+0x9f/0xb8
  [59779.293435]  [<ffffffffa04cb81f>] ? btrfs_write_dirty_block_groups+0x17c/0x214 [btrfs]
  [59779.295000]  [<ffffffff8104d107>] warn_slowpath_fmt+0x48/0x50
  [59779.296138]  [<ffffffffa04c2721>] ? write_one_cache_group.isra.32+0x77/0x82 [btrfs]
  [59779.297663]  [<ffffffffa04cb81f>] btrfs_write_dirty_block_groups+0x17c/0x214 [btrfs]
  [59779.299141]  [<ffffffffa0549b0d>] commit_cowonly_roots+0x1de/0x261 [btrfs]
  [59779.300359]  [<ffffffffa04dd5b6>] btrfs_commit_transaction+0x4c4/0x99c [btrfs]
  [59779.301805]  [<ffffffffa04b5df4>] btrfs_sync_fs+0x145/0x1ad [btrfs]
  [59779.302893]  [<ffffffff81196634>] sync_filesystem+0x7f/0x93
  (...)
  [59779.318186] ---[ end trace 577e2daff90da33a ]---

The following diagram illustrates a sequence of steps leading to this
problem:

       CPU 1                                             CPU 2

                           <at transaction N>

                                                        adds bg A to list
                                                        fs_info->unused_bgs

                                                        adds bg B to list
                                                        fs_info->unused_bgs

                           <transaction kthread
                            commits transaction N
                            and wakes up the
                            cleaner kthread>

  cleaner kthread
    delete_unused_bgs()

      sees bg A in list
      fs_info->unused_bgs

      btrfs_start_transaction()

                           <transaction N + 1 starts>

      deletes bg A

                                                        update_block_group(bg C)

                                                          --> adds bg C to list
                                                              fs_info->unused_bgs

      deletes bg B

      sees bg C in the list
      fs_info->unused_bgs

      btrfs_remove_chunk(bg C)
        btrfs_remove_block_group(bg C)

          --> checks if the block group
              is in a dirty list, and
              because it isn't now, it
              does nothing

          --> the block group item
              is deleted from the
              extent tree

                                                          --> adds bg C to list
                                                              transaction->dirty_bgs

                                                         some task calls
                                                         btrfs_commit_transaction(t N + 1)
                                                           commit_cowonly_roots()
                                                             btrfs_write_dirty_block_groups()
                                                               --> sees bg C in cur_trans->dirty_bgs
                                                               --> calls write_one_cache_group()
                                                                   which returns -ENOENT because
                                                                   it did not find the block group
                                                                   item in the extent tree
                                                               --> transaction aborte with -ENOENT
                                                                   because write_one_cache_group()
                                                                   returned that error

So fix this by adding a block group to the list of dirty block groups
before adding it to the list of unused block groups.

This happened on a stress test using fsstress plus concurrent calls to
fallocate 20G and truncate (releasing part of the space allocated with
fallocate).

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-11-25 05:22:08 -08:00
Filipe Manana 758f2dfcf8 Btrfs: fix scrub preventing unused block groups from being deleted
Currently scrub can race with the cleaner kthread when the later attempts
to delete an unused block group, and the result is preventing the cleaner
kthread from ever deleting later the block group - unless the block group
becomes used and unused again. The following diagram illustrates that
race:

              CPU 1                                 CPU 2

 cleaner kthread
   btrfs_delete_unused_bgs()

     gets block group X from
     fs_info->unused_bgs and
     removes it from that list

                                             scrub_enumerate_chunks()

                                               searches device tree using
                                               its commit root

                                               finds device extent for
                                               block group X

                                               gets block group X from the tree
                                               fs_info->block_group_cache_tree
                                               (via btrfs_lookup_block_group())

                                               sets bg X to RO

     sees the block group is
     already RO and therefore
     doesn't delete it nor adds
     it back to unused list

So fix this by making scrub add the block group again to the list of
unused block groups if the block group is still unused when it finished
scrubbing it and it hasn't been removed already.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-11-25 05:22:08 -08:00
Filipe Manana 020d5b7366 Btrfs: fix race between scrub and block group deletion
Scrub can race with the cleaner kthread deleting block groups that are
unused (and with relocation too) leading to a failure with error -EINVAL
that gets returned to user space.

The following diagram illustrates how it happens:

              CPU 1                                 CPU 2

 cleaner kthread
   btrfs_delete_unused_bgs()

     gets block group X from
     fs_info->unused_bgs

     sets block group to RO

       btrfs_remove_chunk(bg X)

         deletes device extents

                                         scrub_enumerate_chunks()

                                           searches device tree using
                                           its commit root

                                           finds device extent for
                                           block group X

                                           gets block group X from the tree
                                           fs_info->block_group_cache_tree
                                           (via btrfs_lookup_block_group())

                                           sets bg X to RO (again)

          btrfs_remove_block_group(bg X)

            deletes block group from
            fs_info->block_group_cache_tree

            removes extent map from
            fs_info->mapping_tree

                                               scrub_chunk(offset X)

                                                 searches fs_info->mapping_tree
                                                 for extent map starting at
                                                 offset X

                                                    --> doesn't find any such
                                                        extent map
                                                    --> returns -EINVAL and scrub
                                                        errors out to userspace
                                                        with -EINVAL

Fix this by dealing with an extent map lookup failure as an indicator of
block group deletion.
Issue reproduced with fstest btrfs/071.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-11-25 05:19:51 -08:00
David Sterba 31388ab2ed btrfs: fix rcu warning during device replace
The test btrfs/011 triggers a rcu warning
Reviewed-by: Anand Jain <anand.jain@oracle.com>

===============================
[ INFO: suspicious RCU usage. ]
4.4.0-rc1-default+ #286 Tainted: G        W
-------------------------------
fs/btrfs/volumes.c:1977 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
4 locks held by btrfs/28786:

0:  (&fs_info->dev_replace.lock_finishing_cancel_unmount){+.+...}, at: [<ffffffffa00bc785>] btrfs_dev_replace_finishing+0x45/0xa00 [btrfs]
1:  (uuid_mutex){+.+.+.}, at: [<ffffffffa00bc84f>] btrfs_dev_replace_finishing+0x10f/0xa00 [btrfs]
2:  (&fs_devs->device_list_mutex){+.+.+.}, at: [<ffffffffa00bc868>] btrfs_dev_replace_finishing+0x128/0xa00 [btrfs]
3:  (&fs_info->chunk_mutex){+.+...}, at: [<ffffffffa00bc87d>] btrfs_dev_replace_finishing+0x13d/0xa00 [btrfs]

stack backtrace:
CPU: 0 PID: 28786 Comm: btrfs Tainted: G        W       4.4.0-rc1-default+ #286
Hardware name: Intel Corporation SandyBridge Platform/To be filled by O.E.M., BIOS ASNBCPT1.86C.0031.B00.1006301607 06/30/2010
0000000000000001 ffff8800a07dfb48 ffffffff8141d47b 0000000000000001
0000000000000001 0000000000000000 ffff8801464a4f00 ffff8800a07dfb78
ffffffff810cd883 ffff880146eb9400 ffff8800a3698600 ffff8800a33fe220
Call Trace:
[<ffffffff8141d47b>] dump_stack+0x4f/0x74
[<ffffffff810cd883>] lockdep_rcu_suspicious+0x103/0x140
[<ffffffffa0071261>] btrfs_rm_dev_replace_remove_srcdev+0x111/0x130 [btrfs]
[<ffffffff810d354d>] ? trace_hardirqs_on+0xd/0x10
[<ffffffff81449536>] ? __percpu_counter_sum+0x66/0x80
[<ffffffffa00bcc15>] btrfs_dev_replace_finishing+0x4d5/0xa00 [btrfs]
[<ffffffffa00bc96e>] ? btrfs_dev_replace_finishing+0x22e/0xa00 [btrfs]
[<ffffffffa00a8795>] ? btrfs_scrub_dev+0x415/0x6d0 [btrfs]
[<ffffffffa003ea69>] ? btrfs_start_transaction+0x9/0x20 [btrfs]
[<ffffffffa00bda79>] btrfs_dev_replace_start+0x339/0x590 [btrfs]
[<ffffffff81196aa5>] ? __might_fault+0x95/0xa0
[<ffffffffa0078638>] btrfs_ioctl_dev_replace+0x118/0x160 [btrfs]
[<ffffffff811409c6>] ? stack_trace_call+0x46/0x70
[<ffffffffa007c914>] ? btrfs_ioctl+0x24/0x1770 [btrfs]
[<ffffffffa007ce43>] btrfs_ioctl+0x553/0x1770 [btrfs]
[<ffffffff811409c6>] ? stack_trace_call+0x46/0x70
[<ffffffff811d6eb1>] ? do_vfs_ioctl+0x21/0x5a0
[<ffffffff811d6f1c>] do_vfs_ioctl+0x8c/0x5a0
[<ffffffff811e3336>] ? __fget_light+0x86/0xb0
[<ffffffff811e3369>] ? __fdget+0x9/0x20
[<ffffffff811d7451>] ? SyS_ioctl+0x21/0x80
[<ffffffff811d7483>] SyS_ioctl+0x53/0x80
[<ffffffff81b1efd7>] entry_SYSCALL_64_fastpath+0x12/0x6f

This is because of unprotected use of rcu_dereference in
btrfs_scratch_superblocks. We can't add rcu locks around the whole
function because we read the superblock.

The fix will use the rcu string buffer directly without the rcu locking.
Thi is safe as the device will not go away in the meantime. We're
holding the device list mutexes.

Restructuring the code to narrow down the rcu section turned out to be
impossible, we need to call filp_open (through update_dev_time) on the
buffer and this could call kmalloc/__might_sleep. We could call kstrdup
with GFP_ATOMIC but it's not absolutely necessary.

Fixes: 12b1c2637b (Btrfs: enhance btrfs_scratch_superblock to scratch all superblocks)
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-11-25 05:19:51 -08:00
Zhaolei 76a8efa171 btrfs: Continue replace when set_block_ro failed
xfstests/011 failed in node with small_size filesystem.
Can be reproduced by following script:
  DEV_LIST="/dev/vdd /dev/vde"
  DEV_REPLACE="/dev/vdf"

  do_test()
  {
      local mkfs_opt="$1"
      local size="$2"

      dmesg -c >/dev/null
      umount $SCRATCH_MNT &>/dev/null

      echo  mkfs.btrfs -f $mkfs_opt "${DEV_LIST[*]}"
      mkfs.btrfs -f $mkfs_opt "${DEV_LIST[@]}" || return 1
      mount "${DEV_LIST[0]}" $SCRATCH_MNT

      echo -n "Writing big files"
      dd if=/dev/urandom of=$SCRATCH_MNT/t0 bs=1M count=1 >/dev/null 2>&1
      for ((i = 1; i <= size; i++)); do
          echo -n .
          /bin/cp $SCRATCH_MNT/t0 $SCRATCH_MNT/t$i || return 1
      done
      echo

      echo Start replace
      btrfs replace start -Bf "${DEV_LIST[0]}" "$DEV_REPLACE" $SCRATCH_MNT || {
          dmesg
          return 1
      }
      return 0
  }

  # Set size to value near fs size
  # for example, 1897 can trigger this bug in 2.6G device.
  #
  ./do_test "-d raid1 -m raid1" 1897

System will report replace fail with following warning in dmesg:
 [  134.710853] BTRFS: dev_replace from /dev/vdd (devid 1) to /dev/vdf started
 [  135.542390] BTRFS: btrfs_scrub_dev(/dev/vdd, 1, /dev/vdf) failed -28
 [  135.543505] ------------[ cut here ]------------
 [  135.544127] WARNING: CPU: 0 PID: 4080 at fs/btrfs/dev-replace.c:428 btrfs_dev_replace_start+0x398/0x440()
 [  135.545276] Modules linked in:
 [  135.545681] CPU: 0 PID: 4080 Comm: btrfs Not tainted 4.3.0 #256
 [  135.546439] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.8.2-0-g33fbe13 by qemu-project.org 04/01/2014
 [  135.547798]  ffffffff81c5bfcf ffff88003cbb3d28 ffffffff817fe7b5 0000000000000000
 [  135.548774]  ffff88003cbb3d60 ffffffff810a88f1 ffff88002b030000 00000000ffffffe4
 [  135.549774]  ffff88003c080000 ffff88003c082588 ffff88003c28ab60 ffff88003cbb3d70
 [  135.550758] Call Trace:
 [  135.551086]  [<ffffffff817fe7b5>] dump_stack+0x44/0x55
 [  135.551737]  [<ffffffff810a88f1>] warn_slowpath_common+0x81/0xc0
 [  135.552487]  [<ffffffff810a89e5>] warn_slowpath_null+0x15/0x20
 [  135.553211]  [<ffffffff81448c88>] btrfs_dev_replace_start+0x398/0x440
 [  135.554051]  [<ffffffff81412c3e>] btrfs_ioctl+0x1d2e/0x25c0
 [  135.554722]  [<ffffffff8114c7ba>] ? __audit_syscall_entry+0xaa/0xf0
 [  135.555506]  [<ffffffff8111ab36>] ? current_kernel_time64+0x56/0xa0
 [  135.556304]  [<ffffffff81201e3d>] do_vfs_ioctl+0x30d/0x580
 [  135.557009]  [<ffffffff8114c7ba>] ? __audit_syscall_entry+0xaa/0xf0
 [  135.557855]  [<ffffffff810011d1>] ? do_audit_syscall_entry+0x61/0x70
 [  135.558669]  [<ffffffff8120d1c1>] ? __fget_light+0x61/0x90
 [  135.559374]  [<ffffffff81202124>] SyS_ioctl+0x74/0x80
 [  135.559987]  [<ffffffff81809857>] entry_SYSCALL_64_fastpath+0x12/0x6f
 [  135.560842] ---[ end trace 2a5c1fc3205abbdd ]---

Reason:
 When big data writen to fs, the whole free space will be allocated
 for data chunk.
 And operation as scrub need to set_block_ro(), and when there is
 only one metadata chunk in system(or other metadata chunks
 are all full), the function will try to allocate a new chunk,
 and failed because no space in device.

Fix:
 When set_block_ro failed for metadata chunk, it is not a problem
 because scrub_lock paused commit_trancaction in same time, and
 metadata are always cowed, so the on-the-fly writepages will not
 write data into same place with scrub/replace.
 Let replace continue in this case is no problem.

Tested by above script, and xfstests/011, plus 100 times xfstests/070.

Changelog v1->v2:
1: Add detail comments in source and commit-message.
2: Add dmesg detail into commit-message.
3: Limit return value of -ENOSPC to be passed.
All suggested by: Filipe Manana <fdmanana@gmail.com>

Suggested-by: Filipe Manana <fdmanana@gmail.com>
Signed-off-by: Zhao Lei <zhaolei@cn.fujitsu.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-11-25 05:19:51 -08:00
David Sterba da02c68989 btrfs: fix clashing number of the enhanced balance usage filter
I've accidentally picked an already used number for the enhanced usage
filter represented by BTRFS_BALANCE_ARGS_USAGE_RANGE, clashing with
BTRFS_BALANCE_ARGS_CONVERT. Introduced during the development phase,
no backward compatibility issues.

Reported-by: Holger Hoffstätte <holger.hoffstaette@googlemail.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: bc3094673f ("btrfs: extend balance filter usage to take minimum and maximum")
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-11-25 05:19:50 -08:00
Filipe Manana 7fd01182d1 Btrfs: fix the number of transaction units needed to remove a block group
We were using only 1 transaction unit when attempting to delete an unused
block group but in reality we need 3 + N units, where N corresponds to the
number of stripes. We were accounting only for the addition of the orphan
item (for the block group's free space cache inode) but we were not
accounting that we need to delete one block group item from the extent
tree, one free space item from the tree of tree roots and N device extent
items from the device tree.

While one unit is not enough, it worked most of the time because for each
single unit we are too pessimistic and assume an entire tree path, with
the highest possible heigth (8), needs to be COWed with eventual node
splits at every possible level in the tree, so there was usually enough
reserved space for removing all the items and adding the orphan item.

However after adding the orphan item, writepages() can by called by the VM
subsystem against the btree inode when we are under memory pressure, which
causes writeback to start for the nodes we COWed before, this forces the
operation to remove the free space item to COW again some (or all of) the
same nodes (in the tree of tree roots). Even without writepages() being
called, we could fail with ENOSPC because these items are located in
multiple trees and one of them might have a higher heigth and require
node/leaf splits at many levels, exhausting all the reserved space before
removing all the items and adding the orphan.

In the kernel 4.0 release, commit 3d84be7991 ("Btrfs: fix BUG_ON in
btrfs_orphan_add() when delete unused block group"), we attempted to fix
a BUG_ON due to ENOSPC when trying to add the orphan item by making the
cleaner kthread reserve one transaction unit before attempting to remove
the block group, but this was not enough. We had a couple user reports
still hitting the same BUG_ON after 4.0, like Stefan Priebe's report on
a 4.2-rc6 kernel for example:

    http://www.spinics.net/lists/linux-btrfs/msg46070.html

So fix this by reserving all the necessary units of metadata.

Reported-by: Stefan Priebe <s.priebe@profihost.ag>
Fixes: 3d84be7991 ("Btrfs: fix BUG_ON in btrfs_orphan_add() when delete unused block group")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-11-25 05:19:50 -08:00
Filipe Manana 8eab77ff16 Btrfs: use global reserve when deleting unused block group after ENOSPC
It's possible to reach a state where the cleaner kthread isn't able to
start a transaction to delete an unused block group due to lack of enough
free metadata space and due to lack of unallocated device space to allocate
a new metadata block group as well. If this happens try to use space from
the global block group reserve just like we do for unlink operations, so
that we don't reach a permanent state where starting a transaction for
filesystem operations (file creation, renames, etc) keeps failing with
-ENOSPC. Such an unfortunate state was observed on a machine where over
a dozen unused data block groups existed and the cleaner kthread was
failing to delete them due to ENOSPC error when attempting to start a
transaction, and even running balance with a -dusage=0 filter failed with
ENOSPC as well. Also unmounting and mounting again the filesystem didn't
help. Allowing the cleaner kthread to use the global block reserve to
delete the unused data block groups fixed the problem.

Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-11-25 05:19:50 -08:00
Dan Carpenter 89b6c8d1e4 Btrfs: tests: checking for NULL instead of IS_ERR()
btrfs_alloc_dummy_root() return an error pointer on failure, it never
returns NULL.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-11-25 05:19:50 -08:00
David Sterba 9dcbeed4d7 btrfs: fix signed overflows in btrfs_sync_file
The calculation of range length in btrfs_sync_file leads to signed
overflow. This was caught by PaX gcc SIZE_OVERFLOW plugin.

https://forums.grsecurity.net/viewtopic.php?f=1&t=4284

The fsync call passes 0 and LLONG_MAX, the range length does not fit to
loff_t and overflows, but the value is converted to u64 so it silently
works as expected.

The minimal fix is a typecast to u64, switching functions to take
(start, end) instead of (start, len) would be more intrusive.

Coccinelle script found that there's one more opencoded calculation of
the length.

<smpl>
@@
loff_t start, end;
@@
* end - start
</smpl>

CC: stable@vger.kernel.org
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
2015-11-25 05:19:50 -08:00
Benjamin Coddington 38b7631fbe nfs4: limit callback decoding to received bytes
A truncated cb_compound request will cause the client to decode null or
data from a previous callback for nfs4.1 backchannel case, or uninitialized
data for the nfs4.0 case. This is because the path through
svc_process_common() advances the request's iov_base and decrements iov_len
without adjusting the overall xdr_buf's len field.  That causes
xdr_init_decode() to set up the xdr_stream with an incorrect length in
nfs4_callback_compound().

Fixing this for the nfs4.1 backchannel case first requires setting the
correct iov_len and page_len based on the length of received data in the
same manner as the nfs4.0 case.

Then the request's xdr_buf length can be adjusted for both cases based upon
the remaining iov_len and page_len.

Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-11-23 22:03:15 -05:00
Benjamin Coddington c68a027c05 nfs4: start callback_ident at idr 1
If clp->cl_cb_ident is zero, then nfs_cb_idr_remove_locked() skips removing
it when the nfs_client is freed.  A decoding or server bug can then find
and try to put that first nfs_client which would lead to a crash.

Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Fixes: d687031265 ("nfs4client: convert to idr_alloc()")
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-11-23 21:59:42 -05:00
Jeff Layton 91ab4b4d16 nfs: use sliding delay when LAYOUTGET gets NFS4ERR_DELAY
When LAYOUTGET gets NFS4ERR_DELAY, we currently will wait 15s before
retrying the call. That is a _very_ long time, so add a timeout value to
struct nfs4_layoutget and pass nfs4_async_handle_error a pointer to it.
This allows the RPC engine to use a sliding delay window, instead of a
15s delay.

Signed-off-by: Jeff Layton <jeff.layton@primarydata.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-11-23 21:57:44 -05:00
Kinglong Mee f54423a1f8 NFS4: Cleanup FATTR4_WORD0_FS_LOCATIONS after decoding success
Commit 1ca843a2d2 "nfs: Fix GETATTR bitmap verification" has check
the bitmap after decoding success, but decode_attr_fs_locations forgets
cleanup the FATTR4_WORD0_FS_LOCATIONS bits.

decode_getfattr_attrs always return -EIO when meeting FS_LOCATIONS now.

ls: cannot access /mnt/referal: Input/output error
ls: cannot access /mnt/replicas: Input/output error
total 32
drwxr-xr-x. 7 root root 8192 Nov 16 20:36 pnfs
??????????? ? ?    ?       ?            ? referal
??????????? ? ?    ?       ?            ? replicas

v2: clear the bit earlier

Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Kinglong Mee <kinglongmee@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-11-23 21:56:53 -05:00
Anna Schumaker 291e1b9459 NFS: Properly set NFS v4.2 NFSDBG_FACILITY
NFS v4.2 operations can work outside of pNFS, so dprintk() output
shouldn't be placed under NFSDBG_PNFS.

Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-11-23 21:53:59 -05:00
Christoph Hellwig 6b7153da2c nfs: reduce the amount of ifdefs for v4.2 in nfs4file.c
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-11-23 21:53:14 -05:00
Christoph Hellwig 0f42a6a9b8 nfs: use btrfs ioctl defintions for clone
The NFS CLONE_RANGE defintion was wrong and thus never worked.  Fix this
by simply using the btrfs ioctl defintion.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-11-23 21:53:08 -05:00
Christoph Hellwig 21fad313d5 nfs: allow intra-file CLONE
Originally CLONE didn't allow for intra-file clones, but we recently
updated the spec to support this feature which is also supported by
local Linux file systems.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-11-23 21:52:51 -05:00
Christoph Hellwig 3a2e176905 nfs: offer native ioctls even if CONFIG_COMPAT is set
Without this for example 64-bit binaries on typical amd64 distributions
would not be able to use ioctls on NFS.  For now this only affects clones.
Additionally ->compat_ioctl is defined even for non-compat builds, so
get rid of the pointless ifdef.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-11-23 21:52:28 -05:00
Christoph Hellwig 9494b2ce4b nfs: pass on count for CLONE operations
Currently we pass uninitialized stack garbage in the count parameter.
The value is usually large enought to clone whole files and thus let
simple tests pass, but it makes the tests for range clones very unhappy.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2015-11-23 21:52:22 -05:00
Jan Kara c2489e07c0 vfs: Avoid softlockups with sendfile(2)
The following test program from Dmitry can cause softlockups or RCU
stalls as it copies 1GB from tmpfs into eventfd and we don't have any
scheduling point at that path in sendfile(2) implementation:

        int r1 = eventfd(0, 0);
        int r2 = memfd_create("", 0);
        unsigned long n = 1<<30;
        fallocate(r2, 0, 0, n);
        sendfile(r1, r2, 0, n);

Add cond_resched() into __splice_from_pipe() to fix the problem.

CC: Dmitry Vyukov <dvyukov@google.com>
CC: stable@vger.kernel.org
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-23 21:15:30 -05:00
Jan Kara c725bfce79 vfs: Make sendfile(2) killable even better
Commit 296291cdd1 (mm: make sendfile(2) killable) fixed an issue where
sendfile(2) was doing a lot of tiny writes into a filesystem and thus
was unkillable for a long time. However sendfile(2) can be (mis)used to
issue lots of writes into arbitrary file descriptor such as evenfd or
similar special file descriptors which never hit the standard filesystem
write path and thus are still unkillable. E.g. the following example
from Dmitry burns CPU for ~16s on my test system without possibility to
be killed:

        int r1 = eventfd(0, 0);
        int r2 = memfd_create("", 0);
        unsigned long n = 1<<30;
        fallocate(r2, 0, 0, n);
        sendfile(r1, r2, 0, n);

There are actually quite a few tests for pending signals in sendfile
code however we data to write is always available none of them seems to
trigger. So fix the problem by adding a test for pending signal into
splice_from_pipe_next() also before the loop waiting for pipe buffers to
be available. This should fix all the lockup issues with sendfile of the
do-ton-of-tiny-writes nature.

CC: stable@vger.kernel.org
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-23 21:15:30 -05:00
Al Viro 0ebf7f10d6 fix sysvfs symlinks
The thing got broken back in 2002 - sysvfs does *not* have inline
symlinks; even short ones have bodies stored in the first block
of file.  sysv_symlink() handles that correctly; unfortunately,
attempting to look an existing symlink up will end up confusing
them for inline symlinks, and interpret the block number containing
the body as the body itself.

Nobody has noticed until now, which says something about the level
of testing sysvfs gets ;-/

Cc: stable@vger.kernel.org # all of them, not that anyone cared
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-23 21:11:08 -05:00
Linus Torvalds 3ad5d7e06a Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
 "A bunch of fixes"

* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
  slub: mark the dangling ifdef #else of CONFIG_SLUB_DEBUG
  slub: avoid irqoff/on in bulk allocation
  slub: create new ___slab_alloc function that can be called with irqs disabled
  mm: fix up sparse warning in gfpflags_allow_blocking
  ocfs2: fix umask ignored issue
  PM/OPP: add entry in MAINTAINERS
  kernel/panic.c: turn off locks debug before releasing console lock
  kernel/signal.c: unexport sigsuspend()
  kasan: fix kmemleak false-positive in kasan_module_alloc()
  fat: fix fake_offset handling on error path
  mm/hugetlbfs: fix bugs in fallocate hole punch of areas with holes
  mm/page-writeback.c: initialize m_dirty to avoid compile warning
  various: fix pci_set_dma_mask return value checking
  mm: loosen MADV_NOHUGEPAGE to enable Qemu postcopy on s390
  mm: vmalloc: don't remove inexistent guard hole in remove_vm_area()
  tools/vm/page-types.c: support KPF_IDLE
  ncpfs: don't allow negative timeouts
  configfs: allow dynamic group creation
  MAINTAINERS: add Moritz as reviewer for FPGA Manager Framework
  slab.h: sprinkle __assume_aligned attributes
2015-11-21 10:49:13 -08:00
Junxiao Bi 8f1eb48758 ocfs2: fix umask ignored issue
New created file's mode is not masked with umask, and this makes umask not
work for ocfs2 volume.

Fixes: 702e5bc ("ocfs2: use generic posix ACL infrastructure")
Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com>
Cc: Gang He <ghe@suse.com>
Cc: Mark Fasheh <mfasheh@suse.de>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-20 16:17:32 -08:00
OGAWA Hirofumi 928a477102 fat: fix fake_offset handling on error path
For the root directory, .  and ..  are faked (using dir_emit_dots()) and
ctx->pos is reset from 2 to 0.

A corrupted root directory could cause fat_get_entry() to fail, but
->iterate() (fat_readdir()) reports progress to the VFS (with ctx->pos
rewound to 0), so any following calls to ->iterate() continue to return
the same entries again and again.

The result is that userspace will never see the end of the directory,
causing e.g.  'ls' to hang in a getdents() loop.

[hirofumi@mail.parknet.co.jp: cleanup and make sure to correct fake_offset]
Reported-by: Vegard Nossum <vegard.nossum@oracle.com>
Tested-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Richard Weinberger <richard.weinberger@gmail.com>
Signed-off-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-20 16:17:32 -08:00
Mike Kravetz 1817889e3b mm/hugetlbfs: fix bugs in fallocate hole punch of areas with holes
Hugh Dickins pointed out problems with the new hugetlbfs fallocate hole
punch code.  These problems are in the routine remove_inode_hugepages and
mostly occur in the case where there are holes in the range of pages to be
removed.  These holes could be the result of a previous hole punch or
simply sparse allocation.  The current code could access pages outside the
specified range.

remove_inode_hugepages handles both hole punch and truncate operations.
Page index handling was fixed/cleaned up so that the loop index always
matches the page being processed.  The code now only makes a single pass
through the range of pages as it was determined page faults could not race
with truncate.  A cond_resched() was added after removing up to
PAGEVEC_SIZE pages.

Some totally unnecessary code in hugetlbfs_fallocate() that remained from
early development was also removed.

Tested with fallocate tests submitted here:
http://librelist.com/browser//libhugetlbfs/2015/6/25/patch-tests-add-tests-for-fallocate-system-call/
And, some ftruncate tests under development

Fixes: b5cec28d36 ("hugetlbfs: truncate_hugepages() takes a range of pages")
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: "Hillf Danton" <hillf.zj@alibaba-inc.com>
Cc: <stable@vger.kernel.org>	[4.3]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-20 16:17:32 -08:00
Dan Carpenter 1491e30ed1 ncpfs: don't allow negative timeouts
This code causes a static checker warning because it's a user controlled
variable where we cap the upper bound but not the lower bound.  Let's
return an -EINVAL for negative timeouts.

[akpm@linux-foundation.org: remove unneeded `else']
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Jan Kara <jack@suse.com>
Cc: Petr Vandrovec <petr@vandrovec.name>
Cc: David Howells <dhowells@redhat.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-20 16:17:32 -08:00
Daniel Baluta 5cf6a51e60 configfs: allow dynamic group creation
This patchset introduces IIO software triggers, offers a way of configuring
them via configfs and adds the IIO hrtimer based interrupt source to be used
with software triggers.

The architecture is now split in 3 parts, to remove all IIO trigger specific
parts from IIO configfs core:

(1) IIO configfs - creates the root of the IIO configfs subsys.
(2) IIO software triggers - software trigger implementation, dynamically
    creating /config/iio/triggers group.
(3) IIO hrtimer trigger - is the first interrupt source for software triggers
    (with syfs to follow). Each trigger type can implement its own set of
    attributes.

Lockdep seems to be happy with the locking in configfs patch.

This patch (of 5):

We don't want to hardcode default groups at subsystem
creation time. We export:
	* configfs_register_group
	* configfs_unregister_group
to allow drivers to programatically create/destroy groups
later, after module init time.

This is needed for IIO configfs support.

(akpm: the other 4 patches to be merged via the IIO tree)

Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Suggested-by: Lars-Peter Clausen <lars@metafoo.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Joel Becker <jlbec@evilplan.org>
Cc: Hartmut Knaack <knaack.h@gmx.de>
Cc: Octavian Purdila <octavian.purdila@intel.com>
Cc: Paul Bolle <pebolle@tiscali.nl>
Cc: Adriana Reus <adriana.reus@intel.com>
Cc: Cristina Opriceana <cristina.opriceana@gmail.com>
Cc: Peter Meerwald <pmeerw@pmeerw.net>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2015-11-20 16:17:32 -08:00
Linus Torvalds 95803066c6 Merge branch 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:

 - A collection of crash and deadlock fixes for DAX that are also tagged
   for -stable.  We will look to re-enable DAX pmd mappings in 4.5, but
   for now 4.4 and -stable should disable it by default.

 - A fixup to ext2 and ext4 to mirror the same warning emitted by XFS
   when mounting with "-o dax"

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  block: protect rw_page against device teardown
  mm, dax: fix DAX deadlocks (COW fault)
  dax: disable pmd mappings
  ext2, ext4: warn when mounting with dax enabled
2015-11-20 15:00:50 -08:00
Dan Williams 2e6edc9538 block: protect rw_page against device teardown
Fix use after free crashes like the following:

 general protection fault: 0000 [#1] SMP
 Call Trace:
  [<ffffffffa0050216>] ? pmem_do_bvec.isra.12+0xa6/0xf0 [nd_pmem]
  [<ffffffffa0050ba2>] pmem_rw_page+0x42/0x80 [nd_pmem]
  [<ffffffff8128fd90>] bdev_read_page+0x50/0x60
  [<ffffffff812972f0>] do_mpage_readpage+0x510/0x770
  [<ffffffff8128fd20>] ? I_BDEV+0x20/0x20
  [<ffffffff811d86dc>] ? lru_cache_add+0x1c/0x50
  [<ffffffff81297657>] mpage_readpages+0x107/0x170
  [<ffffffff8128fd20>] ? I_BDEV+0x20/0x20
  [<ffffffff8128fd20>] ? I_BDEV+0x20/0x20
  [<ffffffff8129058d>] blkdev_readpages+0x1d/0x20
  [<ffffffff811d615f>] __do_page_cache_readahead+0x28f/0x310
  [<ffffffff811d6039>] ? __do_page_cache_readahead+0x169/0x310
  [<ffffffff811c5abd>] ? pagecache_get_page+0x2d/0x1d0
  [<ffffffff811c76f6>] filemap_fault+0x396/0x530
  [<ffffffff811f816e>] __do_fault+0x4e/0xf0
  [<ffffffff811fce7d>] handle_mm_fault+0x11bd/0x1b50

Cc: <stable@vger.kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Reported-by: kbuild test robot <lkp@intel.com>
Acked-by: Matthew Wilcox <willy@linux.intel.com>
[willy: symmetry fixups]
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-11-19 13:47:10 -08:00
Dan Williams ee82c9ed41 dax: disable pmd mappings
While dax pmd mappings are functional in the nominal path they trigger
kernel crashes in the following paths:

 BUG: unable to handle kernel paging request at ffffea0004098000
 IP: [<ffffffff812362f7>] follow_trans_huge_pmd+0x117/0x3b0
 [..]
 Call Trace:
  [<ffffffff811f6573>] follow_page_mask+0x2d3/0x380
  [<ffffffff811f6708>] __get_user_pages+0xe8/0x6f0
  [<ffffffff811f7045>] get_user_pages_unlocked+0x165/0x1e0
  [<ffffffff8106f5b1>] get_user_pages_fast+0xa1/0x1b0

 kernel BUG at arch/x86/mm/gup.c:131!
 [..]
 Call Trace:
  [<ffffffff8106f34c>] gup_pud_range+0x1bc/0x220
  [<ffffffff8106f634>] get_user_pages_fast+0x124/0x1b0

 BUG: unable to handle kernel paging request at ffffea0004088000
 IP: [<ffffffff81235f49>] copy_huge_pmd+0x159/0x350
 [..]
 Call Trace:
  [<ffffffff811fad3c>] copy_page_range+0x34c/0x9f0
  [<ffffffff810a0daf>] copy_process+0x1b7f/0x1e10
  [<ffffffff810a11c1>] _do_fork+0x91/0x590

All of these paths are interpreting a dax pmd mapping as a transparent
huge page and making the assumption that the pfn is covered by the
memmap, i.e. that the pfn has an associated struct page.  PTE mappings
do not suffer the same fate since they have the _PAGE_SPECIAL flag to
cause the gup path to fault.  We can do something similar for the PMD
path, or otherwise defer pmd support for cases where a struct page is
available.  For now, 4.4-rc and -stable need to disable dax pmd support
by default.

For development the "depends on BROKEN" line can be removed from
CONFIG_FS_DAX_PMD.

Cc: <stable@vger.kernel.org>
Cc: Jan Kara <jack@suse.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-11-16 23:54:45 -08:00
Geert Uytterhoeven cf89752645 FS-Cache: Add missing initialization of ret in cachefiles_write_page()
fs/cachefiles/rdwr.c: In function ‘cachefiles_write_page’:
fs/cachefiles/rdwr.c:882: warning: ‘ret’ may be used uninitialized in
this function

If the jump to label "error" is taken, "ret" will indeed be
uninitialized, and random stack data may be printed by the debug code.

Fixes: 102f4d900c ("FS-Cache: Handle a write to the page immediately beyond the EOF marker")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2015-11-16 20:38:43 -05:00
Dan Williams ef83b6e8f4 ext2, ext4: warn when mounting with dax enabled
Similar to XFS warn when mounting DAX while it is still considered under
development.  Also, aspects of the DAX implementation, for example
synchronization against multiple faults and faults causing block
allocation, depend on the correct implementation in the filesystem.  The
maturity of a given DAX implementation is filesystem specific.

Cc: <stable@vger.kernel.org>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Matthew Wilcox <willy@linux.intel.com>
Cc: linux-ext4@vger.kernel.org
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Reported-by: Dave Chinner <david@fromorbit.com>
Acked-by: Jan Kara <jack@suse.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2015-11-16 09:43:54 -08:00
Linus Torvalds 63f4f7e8df platform/chrome: Branch for v4.4
Here's the branch of chrome platform changes for v4.4. Some have been queued
 up for the full 4.3 release cycle since I forgot to send them in for that
 round (rebased early on to deal with fixes conflicts).
 
 Most of these enable EC communication stuff -- Pixel 2015 support, enabling
 building for ARM64 platforms, and a few fixes for memory leaks.
 
 There's also a patch in here to allow reading/writing the verified boot
 context, which depends on a sysfs patch acked by Greg.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJWQWj/AAoJEIwa5zzehBx3figQAJuZK+2PDMeOe3hg38WEHpAA
 NVaSkZss2VLN8SQCJ8BqB/xoM2lm3GSef2R705m7s20/FsPP7rcJZoeeNkWUK+rn
 Dc01uJpVwGVtBIjst0FkxS+3xBeUrX6QLQyAnxQV4SIOg4t1EtZvgxK/4wnE726H
 BV0bTsUHKo0+FSrtI/QoHFkSFbUBansQ7JuN00YOfuwJPdhKgpInbJPqVkmRAYqI
 ylFFiTUR946SNDMUvmDnd37I2FrIzxslNTBu/oKl0DKI7DPmN3ITvX2JqnnuxktA
 ru7TWbny+oa2TQAwynYxBq9hpMFHMVVbtDPXE/7MisfL4+KUaSE0e95b4ONfG7yZ
 oxzf6S1RxzhA0Eo/bFZ0i29DZ4ogR8ql65RNolWJg13XACrPVyGrTWW5ZFe6xbI9
 HS13oBOHXIllSDfq9QjMRtNHAv268/oTiF8LXLPrxSCYllGZnKL7g9Ae9dFqOdXx
 mnoqYtVPsaErek4ktqOZIMRY5mXpX2JyR642PjGbK71IjRKmGvvRqpee+iCpF7ew
 OR80tAq56/R3NQqp5pgReshglOwQsLdu99spSc+6anjdeSb85ujM2jwXGjLNHwDi
 9XpyIAXox5dy3CX8LqgqryIKp/vqRd4q1vugKXLL1dBMSAm/QltjqPWxB2fCRCve
 IqNEhz4EI6uhJVeqDSNo
 =dv1O
 -----END PGP SIGNATURE-----

Merge tag 'chrome-platform-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform

Pull chrome platform updates from Olof Johansson:
 "Here's the branch of chrome platform changes for v4.4.  Some have been
  queued up for the full 4.3 release cycle since I forgot to send them
  in for that round (rebased early on to deal with fixes conflicts).

  Most of these enable EC communication stuff -- Pixel 2015 support,
  enabling building for ARM64 platforms, and a few fixes for memory
  leaks.

  There's also a patch in here to allow reading/writing the verified
  boot context, which depends on a sysfs patch acked by Greg"

* tag 'chrome-platform-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/olof/chrome-platform:
  platform/chrome: Fix i2c-designware adapter name
  platform/chrome: Support reading/writing the vboot context
  sysfs: Support is_visible() on binary attributes
  platform/chrome: cros_ec: Fix possible leak in led_rgb_store()
  platform/chrome: cros_ec: Fix leak in sequence_store()
  platform/chrome: Enable Chrome platforms on 64-bit ARM
  platform/chrome: cros_ec_dev - Add a platform device ID table
  platform/chrome: cros_ec_lpc - Add support for Google Pixel 2
  platform/chrome: cros_ec_lpc - Use existing function to check EC result
  platform/chrome: Make depends on MFD_CROS_EC instead CROS_EC_PROTO
  Revert "platform/chrome: Don't make CHROME_PLATFORMS depends on X86 || ARM"
2015-11-13 21:53:18 -08:00
Linus Torvalds 9aa3d651a9 Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
Pull SCSI target updates from Nicholas Bellinger:
 "This series contains HCH's changes to absorb configfs attribute
  ->show() + ->store() function pointer usage from it's original
  tree-wide consumers, into common configfs code.

  It includes usb-gadget, target w/ drivers, netconsole and ocfs2
  changes to realize the improved simplicity, that now renders the
  original include/target/configfs_macros.h CPP magic for fabric drivers
  and others, unnecessary and obsolete.

  And with common code in place, new configfs attributes can be added
  easier than ever before.

  Note, there are further improvements in-flight from other folks for
  v4.5 code in configfs land, plus number of target fixes for post -rc1
  code"

In the meantime, a new user of the now-removed old configfs API came in
through the char/misc tree in commit 7bd1d4093c ("stm class: Introduce
an abstraction for System Trace Module devices").

This merge resolution comes from Alexander Shishkin, who updated his stm
class tracing abstraction to account for the removal of the old
show_attribute and store_attribute methods in commit 517982229f
("configfs: remove old API") from this pull.  As Alexander says about
that patch:

 "There's no need to keep an extra wrapper structure per item and the
  awkward show_attribute/store_attribute item ops are no longer needed.

  This patch converts policy code to the new api, all the while making
  the code quite a bit smaller and easier on the eyes.

  Signed-off-by: Alexander Shishkin <alexander.shishkin@linux.intel.com>"

That patch was folded into the merge so that the tree should be fully
bisectable.

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (23 commits)
  configfs: remove old API
  ocfs2/cluster: use per-attribute show and store methods
  ocfs2/cluster: move locking into attribute store methods
  netconsole: use per-attribute show and store methods
  target: use per-attribute show and store methods
  spear13xx_pcie_gadget: use per-attribute show and store methods
  dlm: use per-attribute show and store methods
  usb-gadget/f_serial: use per-attribute show and store methods
  usb-gadget/f_phonet: use per-attribute show and store methods
  usb-gadget/f_obex: use per-attribute show and store methods
  usb-gadget/f_uac2: use per-attribute show and store methods
  usb-gadget/f_uac1: use per-attribute show and store methods
  usb-gadget/f_mass_storage: use per-attribute show and store methods
  usb-gadget/f_sourcesink: use per-attribute show and store methods
  usb-gadget/f_printer: use per-attribute show and store methods
  usb-gadget/f_midi: use per-attribute show and store methods
  usb-gadget/f_loopback: use per-attribute show and store methods
  usb-gadget/ether: use per-attribute show and store methods
  usb-gadget/f_acm: use per-attribute show and store methods
  usb-gadget/f_hid: use per-attribute show and store methods
  ...
2015-11-13 20:04:17 -08:00