Preparing to add conditional LAYOUTGET to OPEN rpc, the LAYOUTGET
will need the ctx info.
Signed-off-by: Fred Isaman <fred.isaman@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
nfs_init_sequence() will clear this for us.
Signed-off-by: Fred Isaman <fred.isaman@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If the wait for a LOCK operation is interrupted, and then the file is
closed, the locks cleanup code will assume that no new locks will be added
to the inode after it has completed. We already have a mechanism to detect
if there was signal, so let's use that to avoid recreating the local lock
once the RPC completes. Also skip re-sending the LOCK operation for the
various error cases if we were signaled.
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
[Trond: Fix inverted test of locks_lock_inode_wait()]
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
If we get an ESTALE error in response to an RPC call operating on the
file on the MDS, we should immediately cancel the layout for that file.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Ensure that we pass down the inode of the file being deleted so
that we can return any delegation being held.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Even then it isn't really necessary. The reason why we may not want to
pass in a stateid in other cases is that we cannot use the delegation
credential.
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Having these exist as two functions doesn't seem to add anything useful,
and I think merging them together makes this easier to follow.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
We currently have a separate function just to set this, but I think it
makes more sense to set it at the same time as the other values in
nfs4_init_sequence()
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Rather than doing this in the generic NFS client code. Let's put this
with the other v4 stuff so it's all in one place.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
This doesn't really need to be in the generic NFS client code, and I
think it makes more sense to keep the v4 code in one place.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
When we use EXCLUSIVE4_1 mode, the server returns an attribute mask where
all the bits indicate which attributes were set, and where the verifier
was stored. In order to figure out which attribute we have to resend,
we need to clear out the attributes that are set in exclcreat_bitmask.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
[Anna: Fixed typo NFS4_CREATE_EXCLUSIVE4 -> NFS4_CREATE_EXCLUSIVE]
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Neither nfs_inode_set_delegation() nor nfs_inode_reclaim_delegation() are
generic code. They have no business delving into NFSv4 OPEN xdr structures,
so let's replace the "struct nfs_openres" parameter.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If we hold a delegation, then the results of the ACCESS call are protected
anyway.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Currently, if the NFS_INO_INVALID_ATTR flag is set, for instance by
a call to nfs_post_op_update_inode_locked(), then it will not be cleared
until all the attributes have been revalidated. This means, for instance,
that NFSv4 writes will always force a full attribute revalidation.
Track the ctime, mtime, size and change attribute separately from the
other attributes so that we can have nfs_post_op_update_inode_locked()
set them correctly, and later have the cache consistency bitmask be
able to clear them.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Starting with NFSv4.1, the server is able to deduce the client id from
the SEQUENCE op which means it can always figure out whether or not
the client is holding a delegation on a file that is being changed.
For that reason, RFC5661 does not require a delegation to be unconditionally
recalled on operations such as SETATTR, RENAME, or REMOVE.
Note that for now, we continue to return READ delegations since that is
still expected by the Linux knfsd server.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Ensure that when we do finally delete the file, then we return the
delegation.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Move the delegation recall out of the generic code, and into the NFSv4
specific callback.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Move the delegation return out of generic code and down into the
NFSv4 specific unlink code.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Move the delegation return out of generic code.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The 'fmode' argument can take an FMODE_EXEC value, which we want to
filter out before comparing to the delegation type.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If we have a RECLAIM_COMPLETE with a populated cl_lock_waitq, then
that implies that a reconnect has occurred. Since we can't expect a
CB_NOTIFY_LOCK callback at that point, just wake up the entire queue
so that all the tasks can re-poll for their locks.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The task is expected to sleep for a while here, and it's possible that
a new EXCHANGE_ID has occurred in the interim, and we were assigned a
new clientid. Since this is a per-client list, there isn't a lot of
value in vetting the clientid on the incoming request.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
We may get a notification and lose the race to another client. Ensure
that we wait again for a notification in that case.
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Highlights include:
Stable bugfixes:
- Fix breakages in the nfsstat utility due to the inclusion of the NFSv4
LOOKUPP operation.
- Fix a NULL pointer dereference in nfs_idmap_prepare_pipe_upcall() due to
nfs_idmap_legacy_upcall() being called without an 'aux' parameter.
- Fix a refcount leak in the standard O_DIRECT error path.
- Fix a refcount leak in the pNFS O_DIRECT fallback to MDS path.
- Fix CPU latency issues with nfs_commit_release_pages()
- Fix the LAYOUTUNAVAILABLE error case in the file layout type.
- NFS: Fix a race between mmap() and O_DIRECT
Features:
- Support the statx() mask and query flags to enable optimisations when
the user is requesting only attributes that are already up to date in
the inode cache, or is specifying the AT_STATX_DONT_SYNC flag.
- Add a module alias for the SCSI pNFS layout type.
Bugfixes:
- Automounting when resolving a NFSv4 referral should preserve the RDMA
transport protocol settings.
- Various other RDMA bugfixes from Chuck.
- pNFS block layout fixes.
- Always set NFS_LOCK_LOST when a lock is lost.
-----BEGIN PGP SIGNATURE-----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=5Vv2
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-4.16-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Stable bugfixes:
- Fix breakages in the nfsstat utility due to the inclusion of the
NFSv4 LOOKUPP operation
- Fix a NULL pointer dereference in nfs_idmap_prepare_pipe_upcall()
due to nfs_idmap_legacy_upcall() being called without an 'aux'
parameter
- Fix a refcount leak in the standard O_DIRECT error path
- Fix a refcount leak in the pNFS O_DIRECT fallback to MDS path
- Fix CPU latency issues with nfs_commit_release_pages()
- Fix the LAYOUTUNAVAILABLE error case in the file layout type
- NFS: Fix a race between mmap() and O_DIRECT
Features:
- Support the statx() mask and query flags to enable optimisations
when the user is requesting only attributes that are already up to
date in the inode cache, or is specifying the AT_STATX_DONT_SYNC
flag
- Add a module alias for the SCSI pNFS layout type
Bugfixes:
- Automounting when resolving a NFSv4 referral should preserve the
RDMA transport protocol settings
- Various other RDMA bugfixes from Chuck
- pNFS block layout fixes
- Always set NFS_LOCK_LOST when a lock is lost"
* tag 'nfs-for-4.16-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (69 commits)
NFS: Fix a race between mmap() and O_DIRECT
NFS: Remove a redundant call to unmap_mapping_range()
pnfs/blocklayout: Ensure disk address in block device map
pnfs/blocklayout: pnfs_block_dev_map uses bytes, not sectors
lockd: Fix server refcounting
SUNRPC: Fix null rpc_clnt dereference in rpc_task_queued tracepoint
SUNRPC: Micro-optimize __rpc_execute
SUNRPC: task_run_action should display tk_callback
sunrpc: Format RPC events consistently for display
SUNRPC: Trace xprt_timer events
xprtrdma: Correct some documenting comments
xprtrdma: Fix "bytes registered" accounting
xprtrdma: Instrument allocation/release of rpcrdma_req/rep objects
xprtrdma: Add trace points to instrument QP and CQ access upcalls
xprtrdma: Add trace points in the client-side backchannel code paths
xprtrdma: Add trace points for connect events
xprtrdma: Add trace points to instrument MR allocation and recovery
xprtrdma: Add trace points to instrument memory invalidation
xprtrdma: Add trace points in reply decoder path
xprtrdma: Add trace points to instrument memory registration
..
For NFS, we just use the "raw" API since the i_version is mostly
managed by the server. The exception there is when the client
holds a write delegation, but we only need to bump it once
there anyway to handle CB_GETATTR.
Tested-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
There are 2 comments in the NFSv4 code which suggest that
SIGLOST should possibly be sent to a process. In these
cases a lock has been lost.
The current practice is to set NFS_LOCK_LOST so that
read/write returns EIO when a lock is lost.
So change these comments to code when sets NFS_LOCK_LOST.
One case is when lock recovery after apparent server restart
fails with NFS4ERR_DENIED, NFS4ERR_RECLAIM_BAD, or
NFS4ERRO_RECLAIM_CONFLICT. The other case is when a lock
attempt as part of lease recovery fails with NFS4ERR_DENIED.
In an ideal world, these should not happen. However I have
a packet trace showing an NFSv4.1 session getting
NFS4ERR_BADSESSION after an extended network parition. The
NFSv4.1 client treats this like server reboot until/unless
it get NFS4ERR_NO_GRACE, in which case it switches over to
"nograce" recovery mode. In this network trace, the client
attempts to recover a lock and the server (incorrectly)
reports NFS4ERR_DENIED rather than NFS4ERR_NO_GRACE. This
leads to the ineffective comment and the client then
continues to write using the OPEN stateid.
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Convert CLOSE so that it specifies the correct stateid and
inode for the error handling.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Convert CLOSE so that it specifies the correct stateid, state and
inode for the error handling.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Commit e12937279c "NFS: Move the flock open mode check into nfs_flock()"
changed NFSv3 behavior for flock() such that the open mode must match the
lock type, however that requirement shouldn't be enforced for flock().
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Cc: stable@vger.kernel.org # v4.12
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Before traversing a referral and performing a mount, the mounted-on
directory looks strange:
dr-xr-xr-x. 2 4294967294 4294967294 0 Dec 31 1969 dir.0
nfs4_get_referral is wiping out any cached attributes with what was
returned via GETATTR(fs_locations), but the bit mask for that
operation does not request any file attributes.
Retrieve owner and timestamp information so that the memcpy in
nfs4_get_referral fills in more attributes.
Changes since v1:
- Don't request attributes that the client unconditionally replaces
- Request only MOUNTED_ON_FILEID or FILEID attribute, not both
- encode_fs_locations() doesn't use the third bitmask word
Fixes: 6b97fd3da1 ("NFSv4: Follow a referral")
Suggested-by: Pradeep Thomas <pradeepthomas@gmail.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
In nfs_set_open_stateid_locked, we must ignore stateids from closed state.
Reported-by: Andrew W Elble <aweits@rit.edu>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If our layoutreturn returns an NFS4ERR_OLD_STATEID, then try to
update the stateid and retry.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If our layoutreturn on close operation returns an NFS4ERR_OLD_STATEID,
then try to update the stateid and retry. We know that there should
be no further LAYOUTGET requests being launched.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If the stateid is no longer recognised on the server, either due to a
restart, or due to a competing CLOSE call, then we do not have to
retry. Any open contexts that triggered a reopen of the file, will
also act as triggers for any CLOSE for the updated stateids.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If we're racing with an OPEN, then retry the operation instead of
declaring it a success.
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
[Andrew W Elble: Fix a typo in nfs4_refresh_open_stateid]
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If the server that does not implement NFSv4.1 persistent session
semantics reboots while we are performing an exclusive create,
then the return value of NFS4ERR_DELAY when we replay the open
during the grace period causes us to lose the verifier.
When the grace period expires, and we present a new verifier,
the server will then correctly reply NFS4ERR_EXIST.
This commit ensures that we always present the same verifier when
replaying the OPEN.
Reported-by: Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Ben Coddington has noted the following race between OPEN and CLOSE
on a single client.
Process 1 Process 2 Server
========= ========= ======
1) OPEN file
2) OPEN file
3) Process OPEN (1) seqid=1
4) Process OPEN (2) seqid=2
5) Reply OPEN (2)
6) Receive reply (2)
7) new stateid, seqid=2
8) CLOSE file, using
stateid w/ seqid=2
9) Reply OPEN (1)
10( Process CLOSE (8)
11) Reply CLOSE (8)
12) Forget stateid
file closed
13) Receive reply (7)
14) Forget stateid
file closed.
15) Receive reply (1).
16) New stateid seqid=1
is really the same
stateid that was
closed.
IOW: the reply to the first OPEN is delayed. Since "Process 2" does
not wait before closing the file, and it does not cache the closed
stateid, then when the delayed reply is finally received, it is treated
as setting up a new stateid by the client.
The fix is to ensure that the client processes the OPEN and CLOSE calls
in the same order in which the server processed them.
This commit ensures that we examine the seqid of the stateid
returned by OPEN. If it is a new stateid, we assume the seqid
must be equal to the value 1, and that each state transition
increments the seqid value by 1 (See RFC7530, Section 9.1.4.2,
and RFC5661, Section 8.2.2).
If the tracker sees that an OPEN returns with a seqid that is greater
than the cached seqid + 1, then it bumps a flag to ensure that the
caller waits for the RPCs carrying the missing seqids to complete.
Note that there can still be pathologies where the server crashes before
it can even send us the missing seqids. Since the OPEN call is still
holding a slot when it waits here, that could cause the recovery to
stall forever. To avoid that, we time out after a 5 second wait.
Reported-by: Benjamin Coddington <bcodding@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
atomic_t variables are currently used to implement reference
counters with the following properties:
- counter is initialized to 1 using atomic_set()
- a resource is freed upon counter reaching zero
- once counter reaches zero, its further
increments aren't allowed
- counter schema uses basic atomic operations
(set, inc, inc_not_zero, dec_and_test, etc.)
Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.
The variable nfs_client.cl_count is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
atomic_t variables are currently used to implement reference
counters with the following properties:
- counter is initialized to 1 using atomic_set()
- a resource is freed upon counter reaching zero
- once counter reaches zero, its further
increments aren't allowed
- counter schema uses basic atomic operations
(set, inc, inc_not_zero, dec_and_test, etc.)
Such atomic variables should be converted to a newly provided
refcount_t type and API that prevents accidental counter overflows
and underflows. This is important since overflows and underflows
can lead to use-after-free situation and be exploitable.
The variable nfs4_lock_state.ls_count is used as pure reference counter.
Convert it to refcount_t and fix up the operations.
Suggested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: David Windsor <dwindsor@gmail.com>
Reviewed-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
If the previous request on a slot was interrupted before it was
processed by the server, then our slot sequence number may be out of whack,
and so we try the next operation using the old sequence number.
The problem with this, is that not all servers check to see that the
client is replaying the same operations as previously when they decide
to go to the replay cache, and so instead of the expected error of
NFS4ERR_SEQ_FALSE_RETRY, we get a replay of the old reply, which could
(if the operations match up) be mistaken by the client for a new reply.
To fix this, we attempt to send a COMPOUND containing only the SEQUENCE op
in order to resync our slot sequence number.
Cc: Olga Kornievskaia <olga.kornievskaia@gmail.com>
[olga.kornievskaia@gmail.com: fix an Oops]
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
The NFS_ACCESS_* flags aren't a 1:1 mapping to the MAY_* flags, so
checking for MAY_WHATEVER might have surprising results in
nfs*_proc_access(). Let's simplify this check when determining which
bits to ask for, and do it in a generic place instead of copying code
for each NFS version.
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Since we can now use a lock stateid or a delegation stateid, that
differs from the context stateid, we need to change the test in
nfs4_layoutget_handle_exception() to take this into account.
This fixes an infinite layoutget loop in the NFS client whereby
it keeps retrying the initial layoutget using the same broken
stateid.
Fixes: 70d2f7b1ea ("pNFS: Use the standard I/O stateid when...")
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
This field hasn't been used since commit 57b691819e ("NFS: Cache
access checks more aggressively").
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Fred Isaman
Benjamin Coddington
Trond Myklebust
Trond Myklebust
Anna Schumaker
Jeff Layton
Linus Torvalds
NeilBrown
Chuck Lever
Elena Reshetova