Граф коммитов

134 Коммитов

Автор SHA1 Сообщение Дата
Sven Eckelmann 679695813c batman-adv: use shorter pr_warn instead of pr_warning
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-05-13 19:06:41 +02:00
Marek Lindner 0b0094e000 batman-adv: replace HZ calculations with jiffies_to_msecs()
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Acked-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-05-11 10:08:13 +02:00
Antonio Quartulli 0d125074eb batman-adv: use ETH_HLEN instead of sizeof(struct ethhdr)
Instead of using sizeof(struct ethhdr) it is strongly recommended to use the
kernel macro ETH_HLEN. This patch substitute each occurrence of the former
expressione with the latter one.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-04-18 09:54:01 +02:00
Marek Lindner 76e3d7fc1a batman-adv: rename BATMAN_OGM_LEN to BATMAN_OGM_HLEN
Using BATMAN_OGM_LEN leaves one with the impression that this is
the full packet size which is not the case. Therefore the variable
is renamed.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Antonio Quartulli <ordex@autistici.org>
2012-04-18 09:54:00 +02:00
Sven Eckelmann 40e0c4f51d batman-adv: Remove spaces after a cast
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-03-11 06:29:44 +08:00
Sven Eckelmann 86ceb36056 batman-adv: Ignore 80-chars per line limits for strings
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-03-11 06:29:44 +08:00
Sven Eckelmann 567db7b0b7 batman-adv: Update copyright years
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-02-17 02:50:21 +08:00
Marek Lindner 01c4224b51 batman-adv: convert batman iv algorithm to use dynamic infrastructure
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-02-17 02:50:20 +08:00
Sven Eckelmann 76543d14ae batman-adv: Explicitly mark the common header structure
All batman-adv packets have a common 3 byte header. It can be used to share
some code between different code paths, but it was never explicit stated that
this header has to be always the same for all packets. Therefore, new code
changes always have the problem that they may accidently introduce regressions
by moving some elements around.

A new structure is introduced that contains the common header and makes it
easier visible that these 3 bytes have to be the same for all on-wire packets.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2012-02-17 02:50:19 +08:00
Marek Lindner b9dacc521f batman-adv: agglomerate all batman iv ogm sending functions in the batman iv file
In the process the batman iv OGM aggregation code could be merged
into the batman iv code base which makes the separate aggregation
files superfluous.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-09-08 17:44:41 +02:00
Marek Lindner b6da4bf5d7 batman-adv: rename all instances of batman_packet to batman_ogm_packet
The follow-up routing code changes are going to introduce additional
routing packet types which make this distinction necessary.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-09-08 17:37:51 +02:00
Antonio Quartulli 015758d002 batman-adv: correct several typ0s in the comments
Several typos have been corrected and some sentences have been rephrased

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-08-22 15:16:19 +02:00
Antonio Quartulli 058d0e2698 batman-adv: keep local table consistency for further TT_RESPONSE
To keep transtable consistency among all the nodes, an originator must
not send not yet announced clients within a full table TT_RESPONSE.
Instead, deleted client have to be kept in the table in order to be sent
within an immediate TT_RESPONSE. In this way all the nodes in the
network will always provide the same response for the same request.

All the modification are committed at the next ttvn increment event.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-07-07 18:49:26 +02:00
Marek Lindner 6a020ab452 batman-adv: broadcast primary OGM on all active hard-interfaces
The primary interface OGM has to be broadcasted on all hard-interfaces
even if the primary interface is not the first interface (if_num = 0).
Therefore the code has to compare the originating interface with the
primary interface instead of checking the if_num.

Reported-by: Linus Luessing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-07-05 14:28:54 +02:00
Antonio Quartulli 8698529d20 batman-adv: add_bcast_packet_to_list() takes the sending delay as parameter
In order to make possible to use the broadcast list for delayed sendings
the "delay" parameter is now provided instead of using 1 as hardcoded
value.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-07-05 14:28:54 +02:00
Antonio Quartulli cc47f66e6b batman-adv: improved roaming mechanism
With the current client announcement implementation, in case of roaming,
an update is triggered on the new AP serving the client. At that point
the new information is spread around by means of the OGM broadcasting
mechanism. Until this operations is not executed, no node is able to
correctly route traffic towards the client. This obviously causes packet
drops and introduces a delay in the time needed by the client to recover
its connections.

A new packet type called ROAMING_ADVERTISEMENT is added to account this
issue.

This message is sent in case of roaming from the new AP serving the
client to the old one and will contain the client MAC address. In this
way an out-of-OGM update is immediately committed, so that the old node
can update its global translation table. Traffic reaching this node will
then be redirected to the correct destination utilising the fresher
information. Thus reducing the packet drops and the connection recovery
delay.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-06-20 11:37:27 +02:00
Antonio Quartulli a73105b8d4 batman-adv: improved client announcement mechanism
The client announcement mechanism informs every mesh node in the network
of any connected non-mesh client, in order to find the path towards that
client from any given point in the mesh.

The old implementation was based on the simple idea of appending a data
buffer to each OGM containing all the client MAC addresses the node is
serving. All other nodes can populate their global translation tables
(table which links client MAC addresses to node addresses) using this
MAC address buffer and linking it to the node's address contained in the
OGM. A node that wants to contact a client has to lookup the node the
client is connected to and its address in the global translation table.

It is easy to understand that this implementation suffers from several
issues:
 - big overhead (each and every OGM contains the entire list of
   connected clients)
 - high latencies for client route updates due to long OGM trip time and
   OGM losses

The new implementation addresses these issues by appending client
changes (new client joined or a client left) to the OGM instead of
filling it with all the client addresses each time. In this way nodes
can modify their global tables by means of "updates", thus reducing the
overhead within the OGMs.

To keep the entire network in sync each node maintains a translation
table version number (ttvn) and a translation table checksum. These
values are spread with the OGM to allow all the network participants to
determine whether or not they need to update their translation table
information.

When a translation table lookup is performed in order to send a packet
to a client attached to another node, the destination's ttvn is added to
the payload packet. Forwarding nodes can compare the packet's ttvn with
their destination's ttvn (this node could have a fresher information
than the source) and re-route the packet if necessary. This greatly
reduces the packet loss of clients roaming from one AP to the next.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-06-20 11:37:24 +02:00
Sven Eckelmann b4e1705417 batman-adv: Reduce usage of char
char was used in different places to store information without really
using the characteristics of that data type or by ignoring the fact that
char has not a well defined signedness.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-06-20 11:37:18 +02:00
Marek Lindner ecbd532108 batman-adv: use NO_FLAGS define instead of hard-coding 0
The definition NO_FLAGS was introduced to make the code more
readable and shall be used to initialize flag fields.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-06-09 20:40:38 +02:00
Sven Eckelmann 704509b8d4 batman-adv: Calculate sizeof using variable insead of types
Documentation/CodingStyle recommends to use the form

	p = kmalloc(sizeof(*p), ...);

to calculate the size of a struct and not the version where the struct
name is spelled out to prevent bugs when the type of p changes. This
also seems appropriate for manipulation of buffers when they are
directly associated with p.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-05-30 07:39:33 +02:00
Sven Eckelmann 747e4221a0 batman-adv: Add const type qualifier for pointers
batman-adv uses pointers which are marked as const and should not
violate that type qualifier by passing it to functions which force a
cast to the non-const version.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-05-30 07:39:31 +02:00
Marek Lindner ca06c6eb9a batman-adv: reset broadcast flood protection on error
The broadcast flood protection should be reset to its original value
if the primary interface could not be retrieved.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-05-15 00:02:06 +02:00
Sven Eckelmann 6d5808d4ae batman-adv: Add missing hardif_free_ref in forw_packet_free
add_bcast_packet_to_list increases the refcount for if_incoming but the
reference count is never decreased. The reference count must be
increased for all kinds of forwarded packets which have the primary
interface stored and forw_packet_free must decrease them. Also
purge_outstanding_packets has to invoke forw_packet_free when a work
item was really cancelled.

This regression was introduced in
32ae9b221e.

Reported-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-05-15 00:02:06 +02:00
Antonio Quartulli 2dafb49d84 batman-adv: rename everything from *hna* into *tt* (translation table)
To be coherent, all the functions/variables/constants have been renamed
to the TranslationTable style

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-05-08 16:10:42 +02:00
Marek Lindner 32ae9b221e batman-adv: Make bat_priv->primary_if an rcu protected pointer
The rcu protected macros rcu_dereference() and rcu_assign_pointer()
for the bat_priv->primary_if need to be used, as well as spin/rcu locking.

Otherwise we might end up using a primary_if pointer pointing to already
freed memory.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-05-01 22:49:03 +02:00
Antonio Quartulli 5f657ec0d2 batman-adv: Move definition of atomic_dec_not_zero() into main.h
atomic_dec_not_zero() is very useful and it is currently defined
multiple times. So it is possible to move it in main.h

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-05-01 22:49:03 +02:00
Linus Lüssing e1a5382f97 batman-adv: Make orig_node->router an rcu protected pointer
The rcu protected macros rcu_dereference() and rcu_assign_pointer()
for the orig_node->router need to be used, as well as spin/rcu locking.
Otherwise we might end up using a router pointer pointing to already
freed memory.

Therefore this commit introduces the safe getter method
orig_node_get_router().

Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-04-17 21:11:01 +02:00
Marek Lindner e6c10f433a batman-adv: rename batman_if struct to hard_iface
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-03-05 12:52:06 +01:00
Marek Lindner 4389e47af8 batman-adv: rename global if_list to hardif_list
Batman-adv works with "hard interfaces" as well as "soft interfaces".
The new name should better make clear which kind of interfaces this
list stores.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-03-05 12:52:05 +01:00
Marek Lindner 39901e7162 batman-adv: separate ethernet comparing calls from hash functions
Note: The function compare_ether_addr() provided by the Linux kernel
requires aligned memory.

Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>
2011-03-05 12:50:14 +01:00
Linus Lüssing ee1e884194 batman-adv: Remove duplicate types.h inclusions
types.h is included by main.h, which is included at the beginning of any
other c-file anyway. Therefore this commit removes those duplicate
inclussions.

Signed-off-by: Linus Lüssing <linus.luessing@ascom.ch>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-02-11 23:30:29 +01:00
Sven Eckelmann 64afe35398 batman-adv: Update copyright years
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-01-31 14:57:12 +01:00
Simon Wunderlich 74ef115359 batman-adv: remove unused parameters
Some function parameters are obsolete now and can be removed.

Reported-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: Sven Eckelmann <sven@narfation.org>
2011-01-31 14:57:09 +01:00
Sven Eckelmann c6c8fea297 net: Add batman-adv meshing protocol
B.A.T.M.A.N. (better approach to mobile ad-hoc networking) is a routing
protocol for multi-hop ad-hoc mesh networks. The networks may be wired or
wireless. See http://www.open-mesh.org/ for more information and user space
tools.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-16 13:44:24 -08:00