When we made all inode updates transactional, we no longer needed
the log recovery detection for inodes being newer on disk than the
transaction being replayed - it was redundant as replay of the log
would always result in the latest version of the inode would be on
disk. It was redundant, but left in place because it wasn't
considered to be a problem.
However, with the new "don't read inodes on create" optimisation,
flushiter has come back to bite us. Essentially, the optimisation
made always initialises flushiter to zero in the create transaction,
and so if we then crash and run recovery and the inode already on
disk has a non-zero flushiter it will skip recovery of that inode.
As a result, log recovery does the wrong thing and we end up with a
corrupt filesystem.
Because we have to support old kernel to new kernel upgrades, we
can't just get rid of the flushiter support in log recovery as we
might be upgrading from a kernel that doesn't have fully transactional
inode updates. Unfortunately, for v4 superblocks there is no way to
guarantee that log recovery knows about this fact.
We cannot add a new inode format flag to say it's a "special inode
create" because it won't be understood by older kernels and so
recovery could do the wrong thing on downgrade. We cannot specially
detect the combination of zero mode/non-zero flushiter on disk to
non-zero mode, zero flushiter in the log item during recovery
because wrapping of the flushiter can result in false detection.
Hence that makes this "don't use flushiter" optimisation limited to
a disk format that guarantees that we don't need it. And that means
the only fix here is to limit the "no read IO on create"
optimisation to version 5 superblocks....
Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
(cherry picked from commit e60896d8f2)
- fix for xfs_fsr returning -EINVAL
- cleanup in xfs_bulkstat
- cleanup in xfs_open_by_handle
- update mount options documentation
- clean up local format handling in xfs_bmapi_write
- fix dquot log reservations which were too small
- fix sgid inheritance for subdirectories when default acls are in use
- add project quota fields to various structures
- fix teardown of quotainfo structures when quotas are turned off
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=QiZy
-----END PGP SIGNATURE-----
Merge tag 'for-linus-v3.11-rc1-2' of git://oss.sgi.com/xfs/xfs
Pull more xfs updates from Ben Myers:
"Here are a fix for xfs_fsr, a cleanup in bulkstat, a cleanup in
xfs_open_by_handle, updated mount options documentation, a cleanup in
xfs_bmapi_write, a fix for the size of dquot log reservations, a fix
for sgid inheritance when acls are in use, a fix for cleaning up
quotainfo structures, and some more of the work which allows group and
project quotas to be used together.
We had a few more in this last quota category that we might have liked
to get in, but it looks there are still a few items that need to be
addressed.
- fix for xfs_fsr returning -EINVAL
- cleanup in xfs_bulkstat
- cleanup in xfs_open_by_handle
- update mount options documentation
- clean up local format handling in xfs_bmapi_write
- fix dquot log reservations which were too small
- fix sgid inheritance for subdirectories when default acls are in use
- add project quota fields to various structures
- fix teardown of quotainfo structures when quotas are turned off"
* tag 'for-linus-v3.11-rc1-2' of git://oss.sgi.com/xfs/xfs:
xfs: Fix the logic check for all quotas being turned off
xfs: Add pquota fields where gquota is used.
xfs: fix sgid inheritance for subdirectories inheriting default acls [V3]
xfs: dquot log reservations are too small
xfs: remove local fork format handling from xfs_bmapi_write()
xfs: update mount options documentation
xfs: use get_unused_fd_flags(0) instead of get_unused_fd()
xfs: clean up unused codes at xfs_bulkstat()
xfs: use XFS_BMAP_BMDR_SPACE vs. XFS_BROOT_SIZE_ADJ
During the review of seperate pquota inode patches, David noticed
that the test to detect all quotas being turned off was
incorrect, and hence the block was not freeing all the quota
information.
The check made sense in Irix, but in Linux, quota is turned off
one at a time, which makes the test invalid for Linux.
This problem existed since XFS was ported to Linux.
David suggested to fix the problem by detecting when all quotas are
turned off by checking m_qflags.
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Add project quota changes to all the places where group quota field
is used:
* add separate project quota members into various structures
* split project quota and group quotas so that instead of overriding
the group quota members incore, the new project quota members are
used instead
* get rid of usage of the OQUOTA flag incore, in favor of separate
group and project quota flags.
* add a project dquot argument to various functions.
Not using the pquotino field from superblock yet.
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
XFS removes sgid bits of subdirectories under a directory containing a default
acl.
When a default acl is set, it implies xfs to call xfs_setattr_nonsize() in its
code path. Such function is shared among mkdir and chmod system calls, and
does some checks unneeded by mkdir (calling inode_change_ok()). Such checks
remove sgid bit from the inode after it has been granted.
With this patch, we extend the meaning of XFS_ATTR_NOACL flag to avoid these
checks when acls are being inherited (thanks hch).
Also, xfs_setattr_mode, doesn't need to re-check for group id and capabilities
permissions, this only implies in another try to remove sgid bit from the
directories. Such check is already done either on inode_change_ok() or
xfs_setattr_nonsize().
Changelog:
V2: Extends the meaning of XFS_ATTR_NOACL instead of wrap the tests into another
function
V3: Remove S_ISDIR check in xfs_setattr_nonsize() from the patch
Signed-off-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
During review of the separate project quota inode patches, it became
obvious that the dquot log reservation calculation underestimated
the number dquots that can be modified in a transaction. This has
it's roots way back in the Irix quota implementation.
That is, when quotas were first implemented in XFS, it only
supported user and project quotas as Irix did not have group quotas.
Hence the worst case operation involving dquot modification was
calculated to involve 2 user dquots and 1 project dquot or 1 user
dequot and 2 project dquots. i.e. 3 dquots. This was determined back
in 1996, and has remained unchanged ever since.
However, back in 2001, the Linux XFS port dropped all support for
project quota and implmented group quotas over the top. This was
effectively done with a search-and-replace of project with group,
and as such the log reservation was not changed. However, with the
advent of group quotas, chmod and rename now could modify more than
3 dquots in a single transaction - both could modify 4 dquots. Hence
this log reservation has been wrong for a long time.
In 2005, project quota support was reintroduced into Linux, but it
was implemented to be mutually exclusive to group quotas and so this
didn't add any new changes to the dquot log reservation. Hence when
project quotas were in use (rather than group quotas) the log
reservation was again valid, just like in the Irix days.
Now, with the addition of the separate project quota inode, group
and project quotas are no longer mutually exclusive, and hence
operations can now modify three dquots per inode where previously it
was only two. The worst case here is the rename transaction, which
can allocate/free space on two different directory inodes, and if
they have different uid/gid/prid configurations and are world
writeable, then rename can actually modify 6 different dquots now.
Further, the dquot log reservation doesn't take into account the
space used by the dquot log format structure that precedes the dquot
that is logged, and hence further underestimates the worst case
log space required by dquots during a transaction. This has been
missing since the first commit in 1996.
Hence the worst case log reservation needs to be increased from 3 to
6, and it needs to take into account a log format header for each of
those dquots.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
The conversion from local format to extent format requires
interpretation of the data in the fork being converted, so it cannot
be done in a generic way. It is up to the caller to convert the fork
format to extent format before calling into xfs_bmapi_write() so
format conversion can be done correctly.
The code in xfs_bmapi_write() to convert the format is used
implicitly by the attribute and directory code, but they
specifically zero the fork size so that the conversion does not do
any allocation or manipulation. Move this conversion into the
shortform to leaf functions for the dir/attr code so the conversions
are explicitly controlled by all callers.
Now we can remove the conversion code in xfs_bmapi_write.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Macro get_unused_fd() is used to allocate a file descriptor with
default flags. Those default flags (0) can be "unsafe":
O_CLOEXEC must be used by default to not leak file descriptor
across exec().
Instead of macro get_unused_fd(), functions anon_inode_getfd()
or get_unused_fd_flags() should be used with flags given by userspace.
If not possible, flags should be set to O_CLOEXEC to provide userspace
with a default safe behavor.
In a further patch, get_unused_fd() will be removed so that
new code start using anon_inode_getfd() or get_unused_fd_flags()
with correct flags.
This patch replaces calls to get_unused_fd() with equivalent call to
get_unused_fd_flags(0) to preserve current behavor for existing code.
The hard coded flag value (0) should be reviewed on a per-subsystem basis,
and, if possible, set to O_CLOEXEC.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
There are some unused codes at xfs_bulkstat():
- Variable bp is defined to point to the on-disk inode cluster
buffer, but it proved to be of no practical help.
- We process the chunks of good inodes which were fetched by iterating
btree records from an AG. When processing inodes from each chunk,
the code recomputing agbno if run into the first inode of a cluster,
however, the agbno is not being used thereafter.
This patch tries to clean up those things.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
- part of the work to allow project quotas and group quotas to
be used together
- inode change count
- inode create transaction
- block queue plugging in buffer readahead and bulkstat
- ordered log vector support
- removal of dead code in and around xfs_sync_inode_grab,
xfs_ialloc_get_rec, XFS_MOUNT_RETERR, XFS_ALLOCFREE_LOG_RES,
XFS_DIROP_LOG_RES, xfs_chash, ctl_table, and xfs_growfs_data_private
- don't keep silent if sunit/swidth can not be changed via mount
- fix a leak of remote symlink blocks into the filesystem when
xattrs are used on symlinks
- fix for fiemap to return FIEMAP_EXTENT_UNKOWN flag on delay extents
- part of a fix for xfs_fsr
- disable speculative preallocation with small files
- performance improvements for inode creates and deletes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=v6KW
-----END PGP SIGNATURE-----
Merge tag 'for-linus-v3.11-rc1' of git://oss.sgi.com/xfs/xfs
Pull xfs update from Ben Myers:
"This includes several bugfixes, part of the work for project quotas
and group quotas to be used together, performance improvements for
inode creation/deletion, buffer readahead, and bulkstat,
implementation of the inode change count, an inode create transaction,
and the removal of a bunch of dead code.
There are also some duplicate commits that you already have from the
3.10-rc series.
- part of the work to allow project quotas and group quotas to be
used together
- inode change count
- inode create transaction
- block queue plugging in buffer readahead and bulkstat
- ordered log vector support
- removal of dead code in and around xfs_sync_inode_grab,
xfs_ialloc_get_rec, XFS_MOUNT_RETERR, XFS_ALLOCFREE_LOG_RES,
XFS_DIROP_LOG_RES, xfs_chash, ctl_table, and
xfs_growfs_data_private
- don't keep silent if sunit/swidth can not be changed via mount
- fix a leak of remote symlink blocks into the filesystem when xattrs
are used on symlinks
- fix for fiemap to return FIEMAP_EXTENT_UNKOWN flag on delay extents
- part of a fix for xfs_fsr
- disable speculative preallocation with small files
- performance improvements for inode creates and deletes"
* tag 'for-linus-v3.11-rc1' of git://oss.sgi.com/xfs/xfs: (61 commits)
xfs: Remove incore use of XFS_OQUOTA_ENFD and XFS_OQUOTA_CHKD
xfs: Change xfs_dquot_acct to be a 2-dimensional array
xfs: Code cleanup and removal of some typedef usage
xfs: Replace macro XFS_DQ_TO_QIP with a function
xfs: Replace macro XFS_DQUOT_TREE with a function
xfs: Define a new function xfs_is_quota_inode()
xfs: implement inode change count
xfs: Use inode create transaction
xfs: Inode create item recovery
xfs: Inode create transaction reservations
xfs: Inode create log items
xfs: Introduce an ordered buffer item
xfs: Introduce ordered log vector support
xfs: xfs_ifree doesn't need to modify the inode buffer
xfs: don't do IO when creating an new inode
xfs: don't use speculative prealloc for small files
xfs: plug directory buffer readahead
xfs: add pluging for bulkstat readahead
xfs: Remove dead function prototype xfs_sync_inode_grab()
xfs: Remove the left function variable from xfs_ialloc_get_rec()
...
XFS_BROOT_SIZE_ADJ is an undocumented macro which accounts for
the difference in size between the on-disk and in-core btree
root. It's much clearer to just use the newly-added
XFS_BMAP_BMDR_SPACE macro which gives us the on-disk size
directly.
In one case, we must test that the if_broot exists before
applying the macro, however.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Pull second set of VFS changes from Al Viro:
"Assorted f_pos race fixes, making do_splice_direct() safe to call with
i_mutex on parent, O_TMPFILE support, Jeff's locks.c series,
->d_hash/->d_compare calling conventions changes from Linus, misc
stuff all over the place."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (63 commits)
Document ->tmpfile()
ext4: ->tmpfile() support
vfs: export lseek_execute() to modules
lseek_execute() doesn't need an inode passed to it
block_dev: switch to fixed_size_llseek()
cpqphp_sysfs: switch to fixed_size_llseek()
tile-srom: switch to fixed_size_llseek()
proc_powerpc: switch to fixed_size_llseek()
ubi/cdev: switch to fixed_size_llseek()
pci/proc: switch to fixed_size_llseek()
isapnp: switch to fixed_size_llseek()
lpfc: switch to fixed_size_llseek()
locks: give the blocked_hash its own spinlock
locks: add a new "lm_owner_key" lock operation
locks: turn the blocked_list into a hashtable
locks: convert fl_link to a hlist_node
locks: avoid taking global lock if possible when waking up blocked waiters
locks: protect most of the file_lock handling with i_lock
locks: encapsulate the fl_link list handling
locks: make "added" in __posix_lock_file a bool
...
For those file systems(btrfs/ext4/ocfs2/tmpfs) that support
SEEK_DATA/SEEK_HOLE functions, we end up handling the similar
matter in lseek_execute() to update the current file offset
to the desired offset if it is valid, ceph also does the
simliar things at ceph_llseek().
To reduce the duplications, this patch make lseek_execute()
public accessible so that we can call it directly from the
underlying file systems.
Thanks Dave Chinner for this suggestion.
[AV: call it vfs_setpos(), don't bring the removed 'inode' argument back]
v2->v1:
- Add kernel-doc comments for lseek_execute()
- Call lseek_execute() in ceph->llseek()
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: Josef Bacik <jbacik@fusionio.com>
Cc: Ben Myers <bpm@sgi.com>
Cc: Ted Tso <tytso@mit.edu>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mark Fasheh <mfasheh@suse.com>
Cc: Joel Becker <jlbec@evilplan.org>
Cc: Sage Weil <sage@inktank.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
category, of note is a fix for on-line resizing file systems where the
block size is smaller than the page size (i.e., file systems 1k blocks
on x86, or more interestingly file systems with 4k blocks on Power or
ia64 systems.)
In the cleanup category, the ext4's punch hole implementation was
significantly improved by Lukas Czerner, and now supports bigalloc
file systems. In addition, Jan Kara significantly cleaned up the
write submission code path. We also improved error checking and added
a few sanity checks.
In the optimizations category, two major optimizations deserve
mention. The first is that ext4_writepages() is now used for
nodelalloc and ext3 compatibility mode. This allows writes to be
submitted much more efficiently as a single bio request, instead of
being sent as individual 4k writes into the block layer (which then
relied on the elevator code to coalesce the requests in the block
queue). Secondly, the extent cache shrink mechanism, which was
introduce in 3.9, no longer has a scalability bottleneck caused by the
i_es_lru spinlock. Other optimizations include some changes to reduce
CPU usage and to avoid issuing empty commits unnecessarily.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=SwaI
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 update from Ted Ts'o:
"Lots of bug fixes, cleanups and optimizations. In the bug fixes
category, of note is a fix for on-line resizing file systems where the
block size is smaller than the page size (i.e., file systems 1k blocks
on x86, or more interestingly file systems with 4k blocks on Power or
ia64 systems.)
In the cleanup category, the ext4's punch hole implementation was
significantly improved by Lukas Czerner, and now supports bigalloc
file systems. In addition, Jan Kara significantly cleaned up the
write submission code path. We also improved error checking and added
a few sanity checks.
In the optimizations category, two major optimizations deserve
mention. The first is that ext4_writepages() is now used for
nodelalloc and ext3 compatibility mode. This allows writes to be
submitted much more efficiently as a single bio request, instead of
being sent as individual 4k writes into the block layer (which then
relied on the elevator code to coalesce the requests in the block
queue). Secondly, the extent cache shrink mechanism, which was
introduce in 3.9, no longer has a scalability bottleneck caused by the
i_es_lru spinlock. Other optimizations include some changes to reduce
CPU usage and to avoid issuing empty commits unnecessarily."
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (86 commits)
ext4: optimize starting extent in ext4_ext_rm_leaf()
jbd2: invalidate handle if jbd2_journal_restart() fails
ext4: translate flag bits to strings in tracepoints
ext4: fix up error handling for mpage_map_and_submit_extent()
jbd2: fix theoretical race in jbd2__journal_restart
ext4: only zero partial blocks in ext4_zero_partial_blocks()
ext4: check error return from ext4_write_inline_data_end()
ext4: delete unnecessary C statements
ext3,ext4: don't mess with dir_file->f_pos in htree_dirblock_to_tree()
jbd2: move superblock checksum calculation to jbd2_write_superblock()
ext4: pass inode pointer instead of file pointer to punch hole
ext4: improve free space calculation for inline_data
ext4: reduce object size when !CONFIG_PRINTK
ext4: improve extent cache shrink mechanism to avoid to burn CPU time
ext4: implement error handling of ext4_mb_new_preallocation()
ext4: fix corruption when online resizing a fs with 1K block size
ext4: delete unused variables
ext4: return FIEMAP_EXTENT_UNKNOWN for delalloc extents
jbd2: remove debug dependency on debug_fs and update Kconfig help text
jbd2: use a single printk for jbd_debug()
...
Remove all incore use of XFS_OQUOTA_ENFD and XFS_OQUOTA_CHKD. Instead,
start using XFS_GQUOTA_.* XFS_PQUOTA_.* counterparts for GQUOTA and
PQUOTA respectively.
On-disk copy still uses XFS_OQUOTA_ENFD and XFS_OQUOTA_CHKD.
Read and write of the superblock does the conversion from *OQUOTA*
to *[PG]QUOTA*.
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
In preparation for combined pquota/gquota support, for the sake
of readability, change xfs_dquot_acct to be a 2-dimensional array.
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
In preparation for combined pquota/gquota support, for the sake
of readability, do some code cleanup surrounding the affected
code.
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
In preparation for combined pquota/gquota support, for the sake
of readability, change the macro to an inline function.
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
In preparation for combined pquota/gquota support, for the sake
of readability, change the macro to an inline function.
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
In preparation for combined pquota/gquota support, define
a new function to check if the given inode is a quota inode.
Signed-off-by: Chandra Seetharaman <sekharan@us.ibm.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
For CRC enabled filesystems, add support for the monotonic inode
version change counter that is needed by protocols like NFSv4 for
determining if the inode has changed in any way at all between two
unrelated operations on the inode.
This bumps the change count the first time an inode is dirtied in a
transaction. Since all modifications to the inode are logged, this
will catch all changes that are made to the inode, including
timestamp updates that occur during data writes.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Chandra Seetharaman <sekharan@us.ibm.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Replace the use of buffer based logging of inode initialisation,
uses the new logical form to describe the range to be initialised
in recovery. We continue to "log" the inode buffers to push them
into the AIL and ensure that the inode create transaction is not
removed from the log before the inode buffers are written to disk.
Update the transaction identifier and reservations to match the
changed implementation.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
When we find a icreate transaction, we need to get and initialise
the buffers in the range that has been passed. Extract and verify
the information in the item record, then loop over the range
initialising and issuing the buffer writes delayed.
Support an arbitrary size range to initialise so that in
future when we allocate inodes in much larger chunks all kernels
that understand this transaction can still recover them.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Define the log and space transaction sizes. Factor the current
create log reservation macro into the two logical halves and reuse
one half for the new icreate transactions. The icreate transaction
is transparent to all the high level create code - the
pre-calculated reservations will correctly set the reservations
dependent on whether the filesystem supports the icreate
transaction.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Introduce the inode create log item type for logical inode create logging.
Instead of logging the changes in buffers, pass the range to be
initialised through the log by a new transaction type. This reduces
the amount of log space required to record initialisation during
allocation from about 128 bytes per inode to a small fixed amount
per inode extent to be initialised.
This requires a new log item type to track it through the log
and the AIL. This is a relatively simple item - most callbacks are
noops as this item has the same life cycle as the transaction.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
If we have a buffer that we have modified but we do not wish to
physically log in a transaction (e.g. we've logged a logical
change), we still need to ensure that transactional integrity is
maintained. Hence we must not move the tail of the log past the
transaction that the buffer is associated with before the buffer is
written to disk.
This means these special buffers still need to be included in the
transaction and added to the AIL just like a normal buffer, but we
do not want the modifications to the buffer written into the
transaction. IOWs, what we want is an "ordered buffer" that
maintains the same transactional life cycle as a physically logged
buffer, just without the transcribing of the modifications to the
log.
Hence we need to flag the buffer as an "ordered buffer" to avoid
including it in vector size calculations or formatting during the
transaction. Once the transaction is committed, the buffer appears
for all intents to be the same as a physically logged buffer as it
transitions through the log and AIL.
Relogging will also work just fine for such an ordered buffer - the
logical transaction will be replayed before the subsequent
modifications that relog the buffer, so everything will be
reconstructed correctly by recovery.
Signed-off-by: Dave Chinner <david@fromorbit.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
And "ordered log vector" is a log vector that is used for
tracking a log item through the CIL and into the AIL as part of the
log checkpointing. These ordered log vectors are special in that
they are not written to to journal in any way, and are not accounted
to the checkpoint being written.
The reason for this behaviour is to allow operations to attach items
to transactions and have them follow the normal transactional
lifecycle without actually having to write them to the journal. This
allows logging of items that track high level logical changes and
writing them to the log, while the physical items being modified
pass through into the AIL and pin the tail of the log (and therefore
the logical item in the log) until all the modified items are
physically written to disk.
IOWs, it allows us to write metadata without physically logging
every individual change but still maintain the full transactional
integrity guarantees we currently have w.r.t. crash recovery.
This change modifies some of the CIL item insertion loops, as
ordered log vectors introduce some new constraints as they don't
track any data. One advantage of this change is that it combines
two log vector chain walks into a single pass, so there is less
overhead in the transaction commit pass as well. It also kills some
unused code in the log vector walk loop when committing the CIL.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Long ago, bulkstat used to read inodes directly from the backing
buffer for speed. This had the unfortunate problem of being cache
incoherent with unlinks, and so xfs_ifree() had to mark the inode
as free directly in the backing buffer. bulkstat was changed some
time ago to use inode cache coherent lookups, and so will never see
unlinked inodes in it's lookups. Hence xfs_ifree() does not need to
touch the inode backing buffer anymore.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
When we are allocating a new inode, we read the inode cluster off
disk to increment the generation number. We are already using a
random generation number for newly allocated inodes, so if we are not
using the ikeep mode, we can just generate a new generation number
when we initialise the newly allocated inode.
This avoids the need for reading the inode buffer during inode
creation. This will speed up allocation of inodes in cold, partially
allocated clusters as they will no longer need to be read from disk
during allocation. It will also reduce the CPU overhead of inode
allocation by not having the process the buffer read, even on cache
hits.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Dedicated small file workloads have been seeing significant free
space fragmentation causing premature inode allocation failure
when large inode sizes are in use. A particular test case showed
that a workload that runs to a real ENOSPC on 256 byte inodes would
fail inode allocation with ENOSPC about about 80% full with 512 byte
inodes, and at about 50% full with 1024 byte inodes.
The same workload, when run with -o allocsize=4096 on 1024 byte
inodes would run to being 100% full before giving ENOSPC. That is,
no freespace fragmentation at all.
The issue was caused by the specific IO pattern the application had
- the framework it was using did not support direct IO, and so it
was emulating it by using fadvise(DONT_NEED). The result was that
the data was getting written back before the speculative prealloc
had been trimmed from memory by the close(), and so small single
block files were being allocated with 2 blocks, and then having one
truncated away. The result was lots of small 4k free space extents,
and hence each new 8k allocation would take another 8k from
contiguous free space and turn it into 4k of allocated space and 4k
of free space.
Hence inode allocation, which requires contiguous, aligned
allocation of 16k (256 byte inodes), 32k (512 byte inodes) or 64k
(1024 byte inodes) can fail to find sufficiently large freespace and
hence fail while there is still lots of free space available.
There's a simple fix for this, and one that has precendence in the
allocator code already - don't do speculative allocation unless the
size of the file is larger than a certain size. In this case, that
size is the minimum default preallocation size:
mp->m_writeio_blocks. And to keep with the concept of being nice to
people when the files are still relatively small, cap the prealloc
to mp->m_writeio_blocks until the file goes over a stripe unit is
size, at which point we'll fall back to the current behaviour based
on the last extent size.
This will effectively turn off speculative prealloc for very small
files, keep preallocation low for small files, and behave as it
currently does for any file larger than a stripe unit. This
completely avoids the freespace fragmentation problem this
particular IO pattern was causing.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Similar to bulkstat inode chunk readahead, we need to plug directory
data buffer readahead during getdents to ensure that we can merge
adjacent readahead requests and sort out of order requests optimally
before they are dispatched. This improves the readahead efficiency
and reduces the IO load it generates as the IO patterns are
significantly better for both contiguous and fragmented directories.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
I was running some tests on bulkstat on CRC enabled filesystems when
I noticed that all the IO being issued was 8k in size, regardless of
the fact taht we are issuing sequential 8k buffers for inodes
clusters. The IO size should be 16k for 256 byte inodes, and 32k for
512 byte inodes, but this wasn't happening.
blktrace showed that there was an explict plug and unplug happening
around each readahead IO from _xfs_buf_ioapply, and the unplug was
causing the IO to be issued immediately. Hence no opportunity was
being given to the elevator to merge adjacent readahead requests and
dispatch them as a single IO.
Add plugging around the inode chunk readahead dispatch loop in
bulkstat to ensure that we don't unplug the queue between adjacent
inode buffer readahead IOs and so we get fewer, larger IO requests
hitting the storage subsystem for bulkstat.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Remove dead function prototype xfs_sync_inode_grab()
from xfs_icache.h.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
This patch clean out the left function variable as it is
useless to xfs_ialloc_get_rec().
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
xfs_swap_extents_check_format() contains checks to make sure that
original and the temporary files during defrag are compatible;
Gabriel VLASIU ran into a case where xfs_fsr returned EINVAL
because the tests found the btree root to be of size 120,
while the fork offset was only 104; IOW, they overlapped.
However, this is just due to an error in the
xfs_swap_extents_check_format() tests, because it is checking
the in-memory btree root size against the on-disk fork offset.
We should be checking the on-disk sizes in both cases.
This patch adds a new macro to calculate this size, and uses
it in the tests.
With this change, the filesystem image provided by Gabriel
allows for proper file degragmentation.
Reported-by: Gabriel VLASIU <gabriel@vlasiu.net>
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
XFS_MOUNT_RETERR is going to be set at xfs_parseargs() if
mp->m_dalign is enabled, so any time we enter "if (mp->m_dalign)"
branch in xfs_update_alignment(), XFS_MOUNT_RETERR is set and so
we always be emitting a warning and returning an error.
Hence, we can remove it and get rid of a couple of redundant
check up against it at xfs_upate_alignment().
Thanks Dave Chinner for the suggestions of simplify the code
in xfs_parseargs().
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Upstream commit 5b292ae3a9
xfs: make use of xfs_calc_buf_res() in xfs_trans.c
Beginning from above commit, neither XFS_ALLOCFREE_LOG_RES() nor
XFS_DIROP_LOG_RES() is used by those routines for calculating
transaction space reservations, so it's safe to remove them now.
Also, with a slightly update for the relevant comments to reflect
the ideas of why those log count numbers should be.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
For FIEMAP ioctl(2), if an extent is in delayed allocation
state, we need to return the FIEMAP_EXTENT_UNKNOWN flag except
the FIEMAP_EXTENT_DELALLOC because its data location is unknown.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Adding an extended attribute to a symbolic link can force that
link to an remote extent. xfs_inactive() incorrectly assumes
that any symbolic link small enough to be in the inode core
is incore, resulting in the remote extent to not be removed.
xfs_ifree() will assert on presence of this leaked remote extent.
Signed-off-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Remove struct xfs_chash from struct xfs_mount as there is no user of
it nowadays.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
As per the mount man page, sunit and swidth can be changed via
mount options. For XFS, on the face of it, those options seems
works if the specified alignments is properly, e.g.
# mount -o sunit=4096,swidth=8192 /dev/sdb1 /mnt
# mount | grep sdb1
/dev/sdb1 on /mnt type xfs (rw,sunit=4096,swidth=8192)
However, neither sunit nor swidth is shown from the xfs_info output.
# xfs_info /mnt
meta-data=/dev/sdb1 isize=256 agcount=4, agsize=262144 blks
= sectsz=512 attr=2
data = bsize=4096 blocks=1048576, imaxpct=25
= sunit=0 swidth=0 blks
^^^^^^^^^^^^^^^^^^^^^^^^^^
naming =version 2 bsize=4096 ascii-ci=0
log =internal bsize=4096 blocks=2560, version=2
= sectsz=512 sunit=0 blks, lazy-count=1
realtime =none extsz=4096 blocks=0, rtextents=0
The reason is that the alignment can only be changed if the relevant
super block is already configured with alignments, otherwise, the
given value is silently ignored.
With this fix, the attempt to mount a storage without strip alignment
setup on a super block will get an error with a warning in syslog to
indicate the true cause, e.g.
# mount -o sunit=4096,swidth=8192 /dev/sdb1 /mnt
mount: wrong fs type, bad option, bad superblock on /dev/sdb1,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
.......
XFS (sdb1): cannot change alignment: superblock does not support data
alignment
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Cc: Mark Tinguely <tinguely@sgi.com>
Cc: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Mark Tinguely <tinguely@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Commit eab4e633 "xfs: uncached buffer reads need to return an error".
Remove redundant error variable, using the function level error variable
to store bp->b_error instead.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
This typedef is unnecessary and should just be removed.
Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Unfortunately, we cannot guarantee that items logged multiple times
and replayed by log recovery do not take objects back in time. When
they are taken back in time, the go into an intermediate state which
is corrupt, and hence verification that occurs on this intermediate
state causes log recovery to abort with a corruption shutdown.
Instead of causing a shutdown and unmountable filesystem, don't
verify post-recovery items before they are written to disk. This is
less than optimal, but there is no way to detect this issue for
non-CRC filesystems If log recovery successfully completes, this
will be undone and the object will be consistent by subsequent
transactions that are replayed, so in most cases we don't need to
take drastic action.
For CRC enabled filesystems, leave the verifiers in place - we need
to call them to recalculate the CRCs on the objects anyway. This
recovery problem can be solved for such filesystems - we have a LSN
stamped in all metadata at writeback time that we can to determine
whether the item should be replayed or not. This is a separate piece
of work, so is not addressed by this patch.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
(cherry picked from commit 9222a9cf86)
For CRC enabled filesystems, the BMBT is rooted in an inode, so it
passes through a different code path on root splits than the
freespace and inode btrees. This is much less traversed by xfstests
than the other trees. When testing on a 1k block size filesystem,
I've been seeing ASSERT failures in generic/234 like:
XFS: Assertion failed: cur->bc_btnum != XFS_BTNUM_BMAP || cur->bc_private.b.allocated == 0, file: fs/xfs/xfs_btree.c, line: 317
which are generally preceded by a lblock check failure. I noticed
this in the bmbt stats:
$ pminfo -f xfs.btree.block_map
xfs.btree.block_map.lookup
value 39135
xfs.btree.block_map.compare
value 268432
xfs.btree.block_map.insrec
value 15786
xfs.btree.block_map.delrec
value 13884
xfs.btree.block_map.newroot
value 2
xfs.btree.block_map.killroot
value 0
.....
Very little coverage of root splits and merges. Indeed, on a 4k
filesystem, block_map.newroot and block_map.killroot are both zero.
i.e. the code is not exercised at all, and it's the only generic
btree infrastructure operation that is not exercised by a default run
of xfstests.
Turns out that on a 1k filesystem, generic/234 accounts for one of
those two root splits, and that is somewhat of a smoking gun. In
fact, it's the same problem we saw in the directory/attr code where
headers are memcpy()d from one block to another without updating the
self describing metadata.
Simple fix - when copying the header out of the root block, make
sure the block number is updated correctly.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
(cherry picked from commit ade1335afe)
Michael L. Semon has been testing CRC patches on a 32 bit system and
been seeing assert failures in the directory code from xfs/080.
Thanks to Michael's heroic efforts with printk debugging, we found
that the problem was that the last free space being left in the
directory structure was too small to fit a unused tag structure and
it was being corrupted and attempting to log a region out of bounds.
Hence the assert failure looked something like:
.....
#5 calling xfs_dir2_data_log_unused() 36 32
#1 4092 4095 4096
#2 8182 8183 4096
XFS: Assertion failed: first <= last && last < BBTOB(bp->b_length), file: fs/xfs/xfs_trans_buf.c, line: 568
Where #1 showed the first region of the dup being logged (i.e. the
last 4 bytes of a directory buffer) and #2 shows the corrupt values
being calculated from the length of the dup entry which overflowed
the size of the buffer.
It turns out that the problem was not in the logging code, nor in
the freespace handling code. It is an initial condition bug that
only shows up on 32 bit systems. When a new buffer is initialised,
where's the freespace that is set up:
[ 172.316249] calling xfs_dir2_leaf_addname() from xfs_dir_createname()
[ 172.316346] #9 calling xfs_dir2_data_log_unused()
[ 172.316351] #1 calling xfs_trans_log_buf() 60 63 4096
[ 172.316353] #2 calling xfs_trans_log_buf() 4094 4095 4096
Note the offset of the first region being logged? It's 60 bytes into
the buffer. Once I saw that, I pretty much knew that the bug was
going to be caused by this.
Essentially, all direct entries are rounded to 8 bytes in length,
and all entries start with an 8 byte alignment. This means that we
can decode inplace as variables are naturally aligned. With the
directory data supposedly starting on a 8 byte boundary, and all
entries padded to 8 bytes, the minimum freespace in a directory
block is supposed to be 8 bytes, which is large enough to fit a
unused data entry structure (6 bytes in size). The fact we only have
4 bytes of free space indicates a directory data block alignment
problem.
And what do you know - there's an implicit hole in the directory
data block header for the CRC format, which means the header is 60
byte on 32 bit intel systems and 64 bytes on 64 bit systems. Needs
padding. And while looking at the structures, I found the same
problem in the attr leaf header. Fix them both.
Note that this only affects 32 bit systems with CRCs enabled.
Everything else is just fine. Note that CRC enabled filesystems created
before this fix on such systems will not be readable with this fix
applied.
Reported-by: Michael L. Semon <mlsemon35@gmail.com>
Debugged-by: Michael L. Semon <mlsemon35@gmail.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
(cherry picked from commit 8a1fd2950e)
We write the superblock every 30s or so which results in the
verifier being called. Right now that results in this output
every 30s:
XFS (vda): Version 5 superblock detected. This kernel has EXPERIMENTAL support enabled!
Use of these features in this kernel is at your own risk!
And spamming the logs.
We don't need to check for whether we support v5 superblocks or
whether there are feature bits we don't support set as these are
only relevant when we first mount the filesytem. i.e. on superblock
read. Hence for the write verification we can just skip all the
checks (and hence verbose output) altogether.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
(cherry picked from commit 34510185ab)
Unfortunately, we cannot guarantee that items logged multiple times
and replayed by log recovery do not take objects back in time. When
they are taken back in time, the go into an intermediate state which
is corrupt, and hence verification that occurs on this intermediate
state causes log recovery to abort with a corruption shutdown.
Instead of causing a shutdown and unmountable filesystem, don't
verify post-recovery items before they are written to disk. This is
less than optimal, but there is no way to detect this issue for
non-CRC filesystems If log recovery successfully completes, this
will be undone and the object will be consistent by subsequent
transactions that are replayed, so in most cases we don't need to
take drastic action.
For CRC enabled filesystems, leave the verifiers in place - we need
to call them to recalculate the CRCs on the objects anyway. This
recovery problem can be solved for such filesystems - we have a LSN
stamped in all metadata at writeback time that we can to determine
whether the item should be replayed or not. This is a separate piece
of work, so is not addressed by this patch.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
For CRC enabled filesystems, the BMBT is rooted in an inode, so it
passes through a different code path on root splits than the
freespace and inode btrees. This is much less traversed by xfstests
than the other trees. When testing on a 1k block size filesystem,
I've been seeing ASSERT failures in generic/234 like:
XFS: Assertion failed: cur->bc_btnum != XFS_BTNUM_BMAP || cur->bc_private.b.allocated == 0, file: fs/xfs/xfs_btree.c, line: 317
which are generally preceded by a lblock check failure. I noticed
this in the bmbt stats:
$ pminfo -f xfs.btree.block_map
xfs.btree.block_map.lookup
value 39135
xfs.btree.block_map.compare
value 268432
xfs.btree.block_map.insrec
value 15786
xfs.btree.block_map.delrec
value 13884
xfs.btree.block_map.newroot
value 2
xfs.btree.block_map.killroot
value 0
.....
Very little coverage of root splits and merges. Indeed, on a 4k
filesystem, block_map.newroot and block_map.killroot are both zero.
i.e. the code is not exercised at all, and it's the only generic
btree infrastructure operation that is not exercised by a default run
of xfstests.
Turns out that on a 1k filesystem, generic/234 accounts for one of
those two root splits, and that is somewhat of a smoking gun. In
fact, it's the same problem we saw in the directory/attr code where
headers are memcpy()d from one block to another without updating the
self describing metadata.
Simple fix - when copying the header out of the root block, make
sure the block number is updated correctly.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Dave Chinner
Linus Torvalds
Chandra Seetharaman
Carlos Maiolino
Yann Droneaud
Jie Liu
Eric Sandeen
Al Viro
Dave Chinner
Eric Sandeen
Mark Tinguely
Joe Perches