# perf trace -e syscalls:sys_enter_prctl --filter="option==SET_NAME"
0.000 Socket Thread/3860 syscalls:sys_enter_prctl(option: SET_NAME, arg2: 0x7fc50b9733e8)
0.053 SSL Cert #78/3860 syscalls:sys_enter_prctl(option: SET_NAME, arg2: 0x7fc50b9733e8)
^C #
If one uses '-v' with 'perf trace', we can see the filter it puts in
place:
New filter for syscalls:sys_enter_prctl: (option==0xf) && (common_pid != 3859 && common_pid != 2757)
We still need to allow using plain '-e prctl' and have this turn into
creating a 'syscalls:sys_enter_prctl' event so that the filter can be
applied only to it as right now '-e prctl' ends up using the
'raw_syscalls:sys_enter/sys_exit'.
The end goal is to have something like:
# perf trace -e prctl/option==SET_NAME/
And have that use tracepoint filters or eBPF ones.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Christian Brauner <christian.brauner@ubuntu.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mike Christie <mchristi@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Record the first event parsing error and report. Implementing feedback
from Jiri Olsa:
https://lkml.org/lkml/2019/10/28/680
An example error is:
$ tools/perf/perf stat -e c/c/
WARNING: multiple event parsing errors
event syntax error: 'c/c/'
\___ unknown term
valid terms: event,filter_rem,filter_opc0,edge,filter_isoc,filter_tid,filter_loc,filter_nc,inv,umask,filter_opc1,tid_en,thresh,filter_all_op,filter_not_nm,filter_state,filter_nm,config,config1,config2,name,period,percore
Initial error:
event syntax error: 'c/c/'
\___ Cannot find PMU `c'. Missing kernel support?
Run 'perf list' for a list of valid events
Usage: perf stat [<options>] [<command>]
-e, --event <event> event selector. use 'perf list' to list available events
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Allison Randal <allison@lohutok.net>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20191116074652.9960-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now anything that uses STRARRAY_FLAGS, like the 'fsmount' syscall will
support mapping or-ed strings back to a value that can be used in a
filter.
In some cases, where STRARRAY_FLAGS isn't used but instead the scnprintf
is a special one because of specific needs, like for mmap, then one has
to set the ->pars to the strarray. See the next cset.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-r2lpqo7dfsrhi4ll0npsb3u7@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Counterpart of strarray__scnprintf_flags(), i.e. from a expression like:
# perf trace -e syscalls:sys_enter_mmap --filter="flags==PRIVATE|FIXED|DENYWRITE"
I.e. that "flags==PRIVATE|FIXED|DENYWRITE", turn that into
# perf trace -e syscalls:sys_enter_mmap --filter=0x812
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-8xst3zrqqogax7fmfzwymvbl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since its values are in two ranges of values we ended up codifying it
using a 'struct strarrays', so now hook it up with STUL_STRARRAYS so
that we can do:
# perf trace -e syscalls:*enter_fcntl --filter=cmd==SETLK||cmd==SETLKW
0.000 sssd_kcm/19021 syscalls:sys_enter_fcntl(fd: 13</var/lib/sss/secrets/secrets.ldb>, cmd: SETLK, arg: 0x7ffcf0a4dee0)
1.523 sssd_kcm/19021 syscalls:sys_enter_fcntl(fd: 13</var/lib/sss/secrets/secrets.ldb>, cmd: SETLK, arg: 0x7ffcf0a4de90)
1.629 sssd_kcm/19021 syscalls:sys_enter_fcntl(fd: 13</var/lib/sss/secrets/secrets.ldb>, cmd: SETLK, arg: 0x7ffcf0a4de90)
2.711 sssd_kcm/19021 syscalls:sys_enter_fcntl(fd: 13</var/lib/sss/secrets/secrets.ldb>, cmd: SETLK, arg: 0x7ffcf0a4de70)
^C#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-mob96wyzri4r3rvyigqfjv0a@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To allow going from string to integer for 'struct strarrays'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-b1ia3xzcy72hv0u4m168fcd0@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We were doing this only at the sys_exit syscall tracepoint, as for
strace-like we count the pair of sys_enter and sys_exit as one event,
but when asking specifically for a the syscalls:sys_enter_NAME
tracepoint we need to count each of those as an event.
I.e. things like:
# perf trace --max-events=4 -e syscalls:sys_enter_lseek
0.000 pool/2242 syscalls:sys_enter_lseek(fd: 14<anon_inode:[timerfd]>, offset: 0, whence: CUR)
0.034 pool/2242 syscalls:sys_enter_lseek(fd: 15<anon_inode:[timerfd]>, offset: 0, whence: CUR)
0.051 pool/2242 syscalls:sys_enter_lseek(fd: 16<anon_inode:[timerfd]>, offset: 0, whence: CUR)
2307.900 sshd/30800 syscalls:sys_enter_lseek(fd: 3</usr/lib64/libsystemd.so.0.25.0>, offset: 9032, whence: SET)
#
Were going on forever, since we only had sys_enter events.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-0ob1dky1a9ijlfrfhxyl40wr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To go from strarrays strings to its indexes.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-wta0qvo207z27huib2c4ijxq@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For syscalls we need to cache the 'syscall_id' and 'ret' field offsets
but as well have a pointer to the syscall_fmt_arg array for the fields,
so that we can expand strings in filter expressions, so introduce
a 'struct evsel_trace' to have in evsel->priv that allows for that.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-hx8ukasuws5sz6rsar73cocv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Next step will be to have a 'struct evsel_trace' to allow for handling
the syscalls tracepoints via the strace-like code while reusing parts of
that code with the other tracepoints, where we don't have things like
the 'syscall_nr' or 'ret' ((raw_)?syscalls:sys_{enter,exit}(_SYSCALL)?)
args that we want to cache offsets and have been using evsel->priv for
that, while for the other tracepoints we'll have just an array of
'struct syscall_arg_fmt' (i.e. ->scnprint() for number->string and
->strtoul() string->number conversions and other state those functions
need).
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-fre21jbyoqxmmquxcho7oa0x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We're using evsel->priv in syscalls:sys_{enter,exit}_SYSCALL and in
raw_syscalls:sys_{enter,exit} to cache the offset of the common fields,
the multiplexor id/syscall_id in the sys_enter case and syscall_id + ret
for sys_exit.
And for the rest of the tracepoints we use it to have a syscall_arg_fmt
array to have scnprintf/strtoul for tracepoint args.
So we better clearly mark them with accessors so that we can move to
having a 'struct evsel_trace' struct for all 'perf trace' specific
evsel->priv usage.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-dcoyxfslg7atz821tz9aupjh@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It was there, but as pr_debug(), make it pr_err() so that we can see it
without -v:
# trace -e syscalls:*lseek --filter="whenc==SET" sleep 1
"whenc" not found in "syscalls:sys_enter_lseek", can't set filter "whenc==SET"
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-ly4rgm1bto8uwc2itpaixjob@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ended up only being useful when filtering multiple irq_vectors
tracepoints, as we end up having a tracepoint for each of the entries,
i.e.:
This will always come with the "RESCHEDULE_VECTOR" in the 'vector' arg:
# perf trace --max-events 8 -e irq_vectors:reschedule*
0.000 cc1/29067 irq_vectors:reschedule_entry(vector: RESCHEDULE)
0.004 cc1/29067 irq_vectors:reschedule_exit(vector: RESCHEDULE)
0.553 cc1/29067 irq_vectors:reschedule_entry(vector: RESCHEDULE)
0.556 cc1/29067 irq_vectors:reschedule_exit(vector: RESCHEDULE)
1.182 cc1/29067 irq_vectors:reschedule_entry(vector: RESCHEDULE)
1.185 cc1/29067 irq_vectors:reschedule_exit(vector: RESCHEDULE)
1.203 :29052/29052 irq_vectors:reschedule_entry(vector: RESCHEDULE)
1.206 :29052/29052 irq_vectors:reschedule_exit(vector: RESCHEDULE)
#
While filtering that value will produce nothing:
# perf trace --max-events 8 -e irq_vectors:reschedule* --filter="vector != RESCHEDULE"
^C#
Maybe it'll be useful for those other tracepoints:
# perf list irq_vectors:vector_*
List of pre-defined events (to be used in -e):
irq_vectors:vector_activate [Tracepoint event]
irq_vectors:vector_alloc [Tracepoint event]
irq_vectors:vector_alloc_managed [Tracepoint event]
irq_vectors:vector_clear [Tracepoint event]
irq_vectors:vector_config [Tracepoint event]
irq_vectors:vector_deactivate [Tracepoint event]
irq_vectors:vector_free_moved [Tracepoint event]
irq_vectors:vector_reserve [Tracepoint event]
irq_vectors:vector_reserve_managed [Tracepoint event]
irq_vectors:vector_setup [Tracepoint event]
irq_vectors:vector_teardown [Tracepoint event]
irq_vectors:vector_update [Tracepoint event]
#
But since we have it done, keep it.
This at least served to teach me that all those irq vectors have a entry
and an exit tracepoint that I can then use just like with
raw_syscalls:sys_{enter,exit}, i.e. pair them, use just a
trace__irq_vectors_entry() + trace__irq_vectors_exit() and use the
'vector' arg as I use the 'syscall id' one for syscalls.
Then the default for 'perf trace' will include irq_vectors in addition
to syscalls.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-wer4cwbbqub3o7sa8h1j3uzb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In some cases, like with x86 IRQ vectors, the common part in names is at
the end, so a suffix, add a scnprintf function for that.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-agxbj6es2ke3rehwt4gkdw23@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Things like:
# grep __data_loc /sys/kernel/debug/tracing/events/sched/sched_process_exec/format
field:__data_loc char[] filename; offset:8; size:4; signed:1;
#
That, at that offset (8) and with that size(8) have an integer that
contains the real length and offset for the contents of that array.
Now this works:
# perf trace --max-events 1 -e sched:*exec -a
0.000 sed/19441 sched:sched_process_exec(filename: "/usr/bin/sync", pid: 19441 (sync), old_pid: 19441 (sync))
#
As when using the libtraceevent based beautifier:
# perf trace --libtraceevent --max-events 1 -e sched:*exec -a
0.000 sync/19463 sched:sched_process_exec(filename=/usr/bin/sync pid=19463 old_pid=19463)
#
I.e. that 'filename' is implemented as a dynamic char array.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-950p0m842fe6n7sxsdwqj5i2@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When doing a system wide 'perf trace record' we need, just like in 'perf
trace' live mode, to filter out perf trace's own pid, so set up a
tracepoint filter for the raw_syscalls tracepoints right after adding
them to the argv array that is set up to then call cmd_record().
Reported-by: Andi Kleen <ak@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-uysx5w8f2y5ndoln5cq370tv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move perf_mmap__read_event() from tools/perf to libperf and export it in
the perf/mmap.h header.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191007125344.14268-13-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move perf_mmap__read_init() from tools/perf to libperf and export it in
the perf/mmap.h header.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191007125344.14268-12-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move perf_mmap__read_init() from tools/perf to libperf and export it in
perf/mmap.h header.
And add pr_debug2()/pr_debug3() macros support, because the code is
using them.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191007125344.14268-11-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move perf_mmap__consume() vrom tools/perf to libperf and export it in
the perf/mmap.h header.
Move also the needed helpers perf_mmap__write_tail(),
perf_mmap__read_head() and perf_mmap__empty().
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20191007125344.14268-10-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that one can try things like:
# perf trace -e msr:* --filter="msr!=FS_BASE && msr != IA32_TSC_DEADLINE && msr != 0x830 && msr != 0x83f && msr !=IA32_SPEC_CTRL" --filter-pids 3750
That, at this point in the patchset, without any strtoul in place for
tracepoint arguments, will result in:
No resolver (strtoul) for "msr" in "msr:read_msr", can't set filter "(msr!=FS_BASE && msr != IA32_TSC_DEADLINE && msr != 0x830 && msr != 0x83f && msr !=IA32_SPEC_CTRL) && (common_pid != 25407 && common_pid != 3750)"
#
See you in the next cset!
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-dx5j70fv2rgkeezd1cb3hv2p@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
And also for 'struct strarray', since its needed to implement
strarrays__strtoul(). This just traverses the entries and when finding a
match, returns (offset + index), i.e. the value associated with the
searched string.
E.g. "EFER" (MSR_EFER) returns:
# grep -w EFER -B2 /tmp/build/perf/trace/beauty/generated/x86_arch_MSRs_array.c
#define x86_64_specific_MSRs_offset 0xc0000080
static const char *x86_64_specific_MSRs[] = {
[0xc0000080 - x86_64_specific_MSRs_offset] = "EFER",
#
0xc0000080
This will be auto-attached to 'struct syscall_arg_fmt' entries
associated with strarrays as soon as we add a ->strarray and ->strarrays
to 'struct syscall_arg_fmt'.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-r2hpaahf8lishyb1owko9vs1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This will go from a string to a number, so that filter expressions can
be constructed with strings and then, before applying the tracepoint
filters (or eBPF, in the future) we can map those strings to numbers.
The first one will be for 'msr' tracepoint arguments, but real quickly
we will be able to reuse all strarrays for that.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-wgqq48agcgr95b8dmn6fygtr@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For instance 'msr' appears in several tracepoints, so we can associate
it with a single scnprintf() routine auto-generated from kernel headers,
as will be done in followup patches.
Start with an empty array of associations.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-89ptht6s5fez82lykuwq1eyb@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So far we used the libtraceevent printing routines when showing
tracepoint arguments, but since 'perf trace' has a lot of beautifiers
for syscall arguments, and since some of those can be used to augment
tracepoint arguments, add a routine to make use of those beautifiers
and allow the user to choose which one to use.
The default now is to use the same beautifiers used for the strace-like
sys_enter+sys_exit lines, but the user can choose the libtraceevent ones
by either using the:
perf trace --libtraceevent_print
command line option, or by setting:
# cat ~/.perfconfig
[trace]
tracepoint_beautifiers = libtraceevent
For instance, here are some examples:
# perf trace -e sched:*switch,*sleep,sched:*wakeup,exit*,sched:*exit sleep 1
0.000 sched:sched_wakeup(comm: "perf", pid: 5273 (perf), prio: 120, success: 1, target_cpu: 6)
0.621 nanosleep(rqtp: 0x7ffdd06d1140, rmtp: NULL) ...
0.628 sched:sched_switch(prev_comm: "sleep", prev_pid: 5273 (sleep), prev_prio: 120, prev_state: 1, next_comm: "swapper/6", next_pid: 0, next_prio: 120)
1000.879 sched:sched_wakeup(comm: "sleep", pid: 5273 (sleep), prio: 120, success: 1, target_cpu: 6)
0.621 ... [continued]: nanosleep()) = 0
1001.026 exit_group(error_code: 0) = ?
1001.216 sched:sched_process_exit(comm: "sleep", pid: 5273 (sleep), prio: 120)
#
And then using libtraceevent, as before:
# perf trace --libtraceevent_print -e sched:*switch,*sleep,sched:*wakeup,exit*,sched:*exit sleep 1
0.000 sched:sched_wakeup(comm=perf pid=5288 prio=120 target_cpu=001)
0.739 nanosleep(rqtp: 0x7ffeba6c2f40, rmtp: NULL) ...
0.747 sched:sched_switch(prev_comm=sleep prev_pid=5288 prev_prio=120 prev_state=S ==> next_comm=swapper/1 next_pid=0 next_prio=120)
1000.902 sched:sched_wakeup(comm=sleep pid=5288 prio=120 target_cpu=001)
0.739 ... [continued]: nanosleep()) = 0
1001.012 exit_group(error_code: 0) = ?
#
The new default allocates an array of 'struct syscall_arg_fmt' for the
tracepoint arguments and, just like with syscall arguments, tries to
find suitable syscall_arg__scnprintf_NAME() routines to augment those
tracepoint arguments based on their type (as in the tracefs "format"
file), or even in their name + type, for instance arguntents with names
ending in "fd" with type "int" get the fd scnprintf beautifier attached,
etc.
Soon this will take advantage of the kernel BTF information to augment
enumerations based on the tracefs "format" type info.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-o8qdluotkcb3b1x2gjqrejcl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that they look a bit like normal strace-like syscall enter+exit
lines.
They will look even more when we switch from using libtraceevent's
tep_print_event() routine in favour of using all the perf beautifiers
used by the strace-like syscall enter+exit lines.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-y4fcej6v6u1m644nbxd2r4pg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Needed for sched's traceoints prev/next comm, where, unlike with
syscalls, we are not dealing with an integer or pointer, but an array
straight out from the ring buffer.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-rlll7tmcqe1g4odtaifil5re@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that the scnprintf beautifiers can access it, as will be the case
with the char array one in the following csets, that needs to know
the number of elements in an array.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-01qmjqv6cb1nj1qy4khdexce@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since all they operate on is on a syscall_arg_fmt instance, so move them
to allow use it from the upcoming tracepoint fprintf routine.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-ynttrs1l75f0x9tk67spd7jd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This will work similar to the syscall args, we'll allocate an array
of 'struct syscall_arg_fmt' for the tracepoint args and then init them
using the same algorithm used for the defaults for syscall args, i.e.
using its types and sometimes names as hints to find the right scnprintf
routine to beautify them from numbers into strings.
Next step is to stop using libtracevent to printf tracepoints, as we'll
have more beautifiers than int provides, modulo perhaps some plugins.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-dcl135relxvf6ljisjg13aqg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We set the default scnprint routines for the syscall args based on its
type or on heuristics based on its names, now we'll use this for
tracepoints as well, so move it out of syscall__set_arg_fmts() and into
a routine that receive just an array of syscall_arg_fmt entries + the
tracepoint format fields list.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-xs3x0zzyes06c7scdsjn01ty@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When not using augmented syscalls, i.e. not passing thru the command
line a eBPF source or object file event that provides the
__augmented_syscalls__ BPF_MAP_TYPE_PERF_EVENT_ARRAY, etc, as with:
perf trace -e tools/perf/examples/bpf/augmented_raw_syscalls.c
or passing that augmented eBPF source/object via the trace.add_events in
.perfconfig file, we were assuming that syscalls were asked for,
differing from when not using augmented syscalls at all.
This is confusing when using .perfconfig to hide the fact we're using
the augmenter, i.e. using:
# perf trace -e sched:* sleep 1
Will show both the scheduler tracepoints and the syscalls, where what we
want is to show just the scheduler tracepoints.
To see the scheduler tracepoints and some specific syscall strace-like
formatting, one has to use:
# perf trace -e sched:*,nanosleep sleep 1
Or, if wanting all the syscalls:
# perf trace -e sched:* --syscalls sleep 1
This way 'perf trace' can be used to trace just a set of tracepoints
while allowing for mixing with strace-like when desired, by simply
adding to the mix the name of the syscalls to show in addition to the
tracepoints.
Fix it so that the behaviour using the eBPF based syscall augmenter is
the same as when not using one.
Testing:
Before this patch, with this ~/.perfconfig:
# egrep -B1 ^[[:space:]]+add_events ~/.perfconfig
[trace]
add_events = /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
#
That points to this pre-compiled eBPF syscall augmenter:
# file /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o
/home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o: ELF 64-bit LSB relocatable, eBPF, version 1 (SYSV), with debug_info, not stripped
And when asking for _only_ sched:sched_switch and sched:sched_wakeup we
were unconditionally getting all the syscalls formatted strace-like:
# perf trace -e sched:*switch,sched:*wakeup sleep 1 |& tail
0.633 fstat(3, 0x7fe11d030ac0) = 0
0.635 mmap(NULL, 217750512, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fe10fec5000
0.643 close(3) = 0
0.668 nanosleep(0x7fff649a3a90, NULL) ...
0.672 sched:sched_switch:prev_comm=sleep prev_pid=4417 prev_prio=120 prev_state=S ==> next_comm=swapper/6 next_pid=0 next_prio=120
1000.822 sched:sched_wakeup:comm=sleep pid=4417 prio=120 target_cpu=006
0.668 ... [continued]: nanosleep()) = 0
1000.923 close(1) = 0
1000.941 close(2) = 0
1000.974 exit_group(0) = ?
#
After the patch:
# perf trace -e sched:*switch,sched:*wakeup sleep 1
0.000 sched:sched_wakeup:comm=perf pid=5529 prio=120 target_cpu=005
1.186 sched:sched_switch:prev_comm=sleep prev_pid=5529 prev_prio=120 prev_state=S ==> next_comm=swapper/5 next_pid=0 next_prio=120
1001.573 sched:sched_wakeup:comm=sleep pid=5529 prio=120 target_cpu=005
#
If we add the "open*" syscalls to the mix then the eBPF augmented _will_
be used and these syscalls will be traced together with the specified
sched tracepoints:
# cd /sys/kernel/debug/tracing/events/syscalls/
# ls -1d sys_enter_open*
sys_enter_open
sys_enter_openat
sys_enter_open_by_handle_at
sys_enter_open_tree
#
# perf trace -e open*,sched:*switch,sched:*wakeup sleep 1
0.000 sched:sched_wakeup:comm=perf pid=5580 prio=120 target_cpu=005
0.590 openat(AT_FDCWD, "/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3
0.616 openat(AT_FDCWD, "/lib64/libc.so.6", O_RDONLY|O_CLOEXEC) = 3
0.846 openat(AT_FDCWD, "/usr/lib/locale/locale-archive", O_RDONLY|O_CLOEXEC) = 3
0.891 sched:sched_switch:prev_comm=sleep prev_pid=5580 prev_prio=120 prev_state=S ==> next_comm=swapper/5 next_pid=0 next_prio=120
1001.005 sched:sched_wakeup:comm=sleep pid=5580 prio=120 target_cpu=005
#
And as we can see, the pathnames were collected via the eBPF augmenters.
If we don't specify anything it'll trace all syscalls:
# perf trace sleep 1 |& tail
0.299 brk(0x5597543a3000) = 0x5597543a3000
0.302 brk(NULL) = 0x5597543a3000
0.307 openat(AT_FDCWD, "/usr/lib/locale/locale-archive", O_RDONLY|O_CLOEXEC) = 3
0.313 fstat(3, 0x7feece50cac0) = 0
0.315 mmap(NULL, 217750512, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7feec13a1000
0.323 close(3) = 0
0.354 nanosleep(0x7ffe338856e0, NULL) = 0
1000.641 close(1) = 0
1000.655 close(2) = 0
1000.673 exit_group(0) = ?
#
Ditto if we don't use .perfconfig's trace.add_events but instead pass
just the augmenter as a command line event:
# vim ~/.perfconfig
# egrep -B1 ^[[:space:]]+add_events ~/.perfconfig
# perf trace -e /home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o sleep 1 |& tail
0.294 brk(0x55ae08ec3000) = 0x55ae08ec3000
0.297 brk(NULL) = 0x55ae08ec3000
0.302 openat(AT_FDCWD, "/usr/lib/locale/locale-archive", O_RDONLY|O_CLOEXEC) = 3
0.309 fstat(3, 0x7f726488fac0) = 0
0.311 mmap(NULL, 217750512, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f7257724000
0.319 close(3) = 0
0.347 nanosleep(0x7ffe23643a70, NULL) = 0
1000.560 close(1) = 0
1000.575 close(2) = 0
1000.593 exit_group(0) = ?
#
As well as that + some syscall names for strace-like formatting:
# perf trace -e socket,connect,/home/acme/git/perf/tools/perf/examples/bpf/augmented_raw_syscalls.o ssh localhost
0.000 socket(PF_LOCAL, SOCK_STREAM|CLOEXEC|NONBLOCK, 0) = 3
0.021 connect(3, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 110) = -1 ENOENT (No such file or directory)
0.034 socket(PF_LOCAL, SOCK_STREAM|CLOEXEC|NONBLOCK, 0) = 3
0.041 connect(3, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 110) = -1 ENOENT (No such file or directory)
0.163 socket(PF_LOCAL, SOCK_STREAM, 0) = 4
0.185 connect(4, { .family: PF_LOCAL, path: /var/lib/sss/pipes/nss }, 110) = 0
0.670 socket(PF_LOCAL, SOCK_STREAM|CLOEXEC|NONBLOCK, 0) = 7
0.684 connect(7, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 110) = -1 ENOENT (No such file or directory)
0.694 socket(PF_LOCAL, SOCK_STREAM|CLOEXEC|NONBLOCK, 0) = 7
0.701 connect(7, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 110) = -1 ENOENT (No such file or directory)
0.994 socket(PF_LOCAL, SOCK_STREAM|CLOEXEC|NONBLOCK, 0) = 5
1.006 connect(5, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 110) = -1 ENOENT (No such file or directory)
1.014 socket(PF_LOCAL, SOCK_STREAM|CLOEXEC|NONBLOCK, 0) = 5
1.022 connect(5, { .family: PF_LOCAL, path: /var/run/nscd/socket }, 110) = -1 ENOENT (No such file or directory)
1.068 socket(PF_INET, SOCK_STREAM, IPPROTO_TCP) = 5
1.087 connect(5, { .family: PF_INET, port: 22, addr: 127.0.0.1 }, 16) = 0
24.299 socket(PF_LOCAL, SOCK_STREAM, 0) = 6
24.337 connect(6, { .family: PF_LOCAL, path: /var/run/.heim_org.h5l.kcm-socket }, 110) = 0
28.441 socket(PF_LOCAL, SOCK_STREAM, 0) = 6
28.516 connect(6, { .family: PF_LOCAL, path: /var/run/.heim_org.h5l.kcm-socket }, 110) = 0
root@localhost's password:^C
#
Everything works without augmenters:
# egrep -B1 ^[[:space:]]+add_events ~/.perfconfig
# perf trace sleep 1 |& tail
0.261 brk(0x5635068ac000) = 0x5635068ac000
0.264 brk(NULL) = 0x5635068ac000
0.268 openat(AT_FDCWD, 0xdce642a0, O_RDONLY|O_CLOEXEC) = 3
0.275 fstat(3, 0x7f3fdce97ac0) = 0
0.277 mmap(NULL, 217750512, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7f3fcfd2c000
0.284 close(3) = 0
0.310 nanosleep(0x7ffdaea6ecd0, NULL) = 0
1000.552 close(1) = 0
1000.565 close(2) = 0
1000.580 exit_group(0) = ?
#
# perf trace -e connect ssh localhost
0.000 connect(3, 0x58266930, 110) = -1 ENOENT (No such file or directory)
0.022 connect(3, 0x58266af0, 110) = -1 ENOENT (No such file or directory)
0.150 connect(4, 0x58266b00, 110) = 0
0.490 connect(7, 0x58264150, 110) = -1 ENOENT (No such file or directory)
0.505 connect(7, 0x58264300, 110) = -1 ENOENT (No such file or directory)
0.832 connect(5, 0x58266220, 110) = -1 ENOENT (No such file or directory)
0.847 connect(5, 0x582663e0, 110) = -1 ENOENT (No such file or directory)
0.899 connect(5, 0x95ba0630, 16) = 0
25.619 connect(6, 0x58266360, 110) = 0
40.564 connect(6, 0x58266330, 110) = 0
root@localhost's password: ^C
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-624f6jxic04031tnt40va4dd@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When we add events via the '[trace]' section in perfconfig the command
line options are not yet processed, so when something goes wrong with
parsing those events and using --verbose is advised, we end up not
getting any more verbosity by doing so.
So just copy the trace.add_events string for later processing, after we
processed --verbose and the other command line options.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-d6wbnz85ftqljdll6ynjyjd8@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To allow them to be used with other stuff, such as tracepoints.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-od3gzg77ppqgnnrxqv40fvgx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
As this has all the things needed to format tracepoints events, not just
syscalls, that, after all, are just tracepoints with a set in stone ABI,
i.e. order and number of parameters.
For tracepoints we'll create a
static struct syscall_fmt tracepoint_fmts[]
array and will fill the ->arg[] entries with the beautifier for each
positional argument and record the name, then, when we need it, we'll
just check that the position has the same name, maybe even type, so that
we can do some check that the tracepoint hasn't changed, if it has, we
can even reorder things.
Keep calling it syscall_fmt but use it as well for tracepoints, do it
this way to minimize changes and reuse what is in place for syscalls,
we'll see.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Luis Cláudio Gonçalves <lclaudio@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-2x1jgiev13zt4njaanlnne0d@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Renaming it to evlist__set_default_evsel_handler(), to better reflect
what we want to do, which is to set a default handler for events we
still haven't set a custom handler, like the ones for "msr:write_msr",
etc that are coming soon.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-e1bit7upnpmtsayh8039kfuw@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We already had evsel_fprintf.c, add its counterpart, so that we can
reduce evsel.h a bit more.
We needed a new perf_event_attr_fprintf.c file so as to have a separate
object to link with the python binding in tools/perf/util/python-ext-sources
and not drag symbol_conf, etc into the python binding.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-06bdmt1062d9unzgqmxwlv88@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we an later link it to the python binding without having to
drag the symbol object files.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-8823tveyasocnuoelq4qopwf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move perf_evlist__poll() from tools/perf to libperf, it will be used in
the following patches.
And rename the existing perf's function to evlist__poll().
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-39-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move perf_evlist__add_pollfd() from tools/perf to libperf, it will be
used in the following patches.
Also rename perf's perf_evlist__add_pollfd()/perf_evlist__filter_pollfd()
to evlist__add_pollfd()/evlist__filter_pollfd().
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-38-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add perf_evlist__first()/last() functions to libperf, as internal
functions and rename perf's origins to evlist__first/last.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-29-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Moving 'nr_mmaps' from 'struct evlist' to 'struct perf_evlist', it will
be used in following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lore.kernel.org/lkml/20190913132355.21634-21-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Arnaldo Carvalho de Melo
Ian Rogers
Jiri Olsa