Liu Bo pointed out that my previous fix would lose the generation update in the
scenario I described. It is actually much worse than that, we could lose the
entire extent if we lose power right after the transaction commits. Consider
the following
write extent 0-4k
log extent in log tree
commit transaction
< power fail happens here
ordered extent completes
We would lose the 0-4k extent because it hasn't updated the actual fs tree, and
the transaction commit will reset the log so it isn't replayed. If we lose
power before the transaction commit we are save, otherwise we are not.
Fix this by keeping track of all extents we logged in this transaction. Then
when we go to commit the transaction make sure we wait for all of those ordered
extents to complete before proceeding. This will make sure that if we lose
power after the transaction commit we still have our data. This also fixes the
problem of the improperly updated extent generation. Thanks,
cc: stable@vger.kernel.org
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
To avoid duplicating this double filemap_fdatawrite_range() call for
inodes with async extents (compressed writes) so often.
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Chris Mason <clm@fb.com>
This has been reported and discussed for a long time, and this hang occurs in
both 3.15 and 3.16.
Btrfs now migrates to use kernel workqueue, but it introduces this hang problem.
Btrfs has a kind of work queued as an ordered way, which means that its
ordered_func() must be processed in the way of FIFO, so it usually looks like --
normal_work_helper(arg)
work = container_of(arg, struct btrfs_work, normal_work);
work->func() <---- (we name it work X)
for ordered_work in wq->ordered_list
ordered_work->ordered_func()
ordered_work->ordered_free()
The hang is a rare case, first when we find free space, we get an uncached block
group, then we go to read its free space cache inode for free space information,
so it will
file a readahead request
btrfs_readpages()
for page that is not in page cache
__do_readpage()
submit_extent_page()
btrfs_submit_bio_hook()
btrfs_bio_wq_end_io()
submit_bio()
end_workqueue_bio() <--(ret by the 1st endio)
queue a work(named work Y) for the 2nd
also the real endio()
So the hang occurs when work Y's work_struct and work X's work_struct happens
to share the same address.
A bit more explanation,
A,B,C -- struct btrfs_work
arg -- struct work_struct
kthread:
worker_thread()
pick up a work_struct from @worklist
process_one_work(arg)
worker->current_work = arg; <-- arg is A->normal_work
worker->current_func(arg)
normal_work_helper(arg)
A = container_of(arg, struct btrfs_work, normal_work);
A->func()
A->ordered_func()
A->ordered_free() <-- A gets freed
B->ordered_func()
submit_compressed_extents()
find_free_extent()
load_free_space_inode()
... <-- (the above readhead stack)
end_workqueue_bio()
btrfs_queue_work(work C)
B->ordered_free()
As if work A has a high priority in wq->ordered_list and there are more ordered
works queued after it, such as B->ordered_func(), its memory could have been
freed before normal_work_helper() returns, which means that kernel workqueue
code worker_thread() still has worker->current_work pointer to be work
A->normal_work's, ie. arg's address.
Meanwhile, work C is allocated after work A is freed, work C->normal_work
and work A->normal_work are likely to share the same address(I confirmed this
with ftrace output, so I'm not just guessing, it's rare though).
When another kthread picks up work C->normal_work to process, and finds our
kthread is processing it(see find_worker_executing_work()), it'll think
work C as a collision and skip then, which ends up nobody processing work C.
So the situation is that our kthread is waiting forever on work C.
Besides, there're other cases that can lead to deadlock, but the real problem
is that all btrfs workqueue shares one work->func, -- normal_work_helper,
so this makes each workqueue to have its own helper function, but only a
wraper pf normal_work_helper.
With this patch, I no long hit the above hang.
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
Truncates and renames are often used to replace old versions of a file
with new versions. Applications often expect this to be an atomic
replacement, even if they haven't done anything to make sure the new
version is fully on disk.
Btrfs has strict flushing in place to make sure that renaming over an
old file with a new file will fully flush out the new file before
allowing the transaction commit with the rename to complete.
This ordering means the commit code needs to be able to lock file pages,
and there are a few paths in the filesystem where we will try to end a
transaction with the page lock held. It's rare, but these things can
deadlock.
This patch removes the ordered flushes and switches to a best effort
filemap_flush like ext4 uses. It's not perfect, but it should fix the
deadlocks.
Signed-off-by: Chris Mason <clm@fb.com>
xfstests generic/127 detected this problem.
With commit 7fc34a62ca, now fsync will only flush
data within the passed range. This is the cause of the above problem,
-- btrfs's fsync has a stage called 'sync log' which will wait for all the
ordered extents it've recorded to finish.
In xfstests/generic/127, with mixed operations such as truncate, fallocate,
punch hole, and mapwrite, we get some pre-allocated extents, and mapwrite will
mmap, and then msync. And I find that msync will wait for quite a long time
(about 20s in my case), thanks to ftrace, it turns out that the previous
fallocate calls 'btrfs_wait_ordered_range()' to flush dirty pages, but as the
range of dirty pages may be larger than 'btrfs_wait_ordered_range()' wants,
there can be some ordered extents created but not getting corresponding pages
flushed, then they're left in memory until we fsync which runs into the
stage 'sync log', and fsync will just wait for the system writeback thread
to flush those pages and get ordered extents finished, so the latency is
inevitable.
This adds a flush similar to btrfs_start_ordered_extent() in
btrfs_wait_logged_extents() to fix that.
Reviewed-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Liu Bo <bo.li.liu@oracle.com>
Signed-off-by: Chris Mason <clm@fb.com>
I've noticed an extra line after "use no compression", but search
revealed much more in messages of more critical levels and rare errors.
Signed-off-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Chris Mason <clm@fb.com>
When we create a snapshot, we just need wait the ordered extents in
the source fs/file root, but because we use the global mutex to protect
this ordered extents list of the source fs/file root to avoid accessing
a empty list, if someone got the mutex to access the ordered extents list
of the other fs/file root, we had to wait.
This patch splits the above global mutex, now every fs/file root has
its own mutex to protect its own list.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
The tasks that wait for the IO_DONE flag just care about the io of the dirty
pages, so it is better to wake up them immediately after all the pages are
written, not the whole process of the io completes.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
btrfs_wait_ordered_roots() moves all the list entries to a new list,
and then deals with them one by one. But if the other task invokes this
function at that time, it would get a empty list. It makes the enospc
error happens more early. Fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Since the "_struct" suffix is mainly used for distinguish the differnt
btrfs_work between the original and the newly created one,
there is no need using the suffix since all btrfs_workers are changed
into btrfs_workqueue.
Also this patch fixed some codes whose code style is changed due to the
too long "_struct" suffix.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Tested-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Replace the fs_info->submit_workers with the newly created
btrfs_workqueue.
Signed-off-by: Qu Wenruo <quwenruo@cn.fujitsu.com>
Tested-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fb.com>
There was a problem in the old code:
If we failed to log the csum, we would free all the ordered extents in the log list
including those ordered extents that were logged successfully, it would make the
log committer not to wait for the completion of the ordered extents.
This patch doesn't insert the ordered extents that is about to be logged into
a global list, instead, we insert them into a local list. If we log the ordered
extents successfully, we splice them with the global list, or we will throw them
away, then do full sync. It can also reduce the lock contention and the traverse
time of list.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Convert all applicable cases of printk and pr_* to the btrfs_* macros.
Fix all uses of the BTRFS prefix.
Signed-off-by: Frank Holton <fholton@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
After an ordered extent completes, don't blindly reset the
inode's ordered tree last accessed ordered extent pointer.
While running the xfstests I noticed that about 29% of the
time the ordered extent to which tree->last pointed was not
the same as our just completed ordered extent. After that I
ran the following sysbench test (after a prepare phase) and
noticed that about 68% of the time tree->last pointed to
a different ordered extent too.
sysbench --test=fileio --file-num=32 --file-total-size=4G \
--file-test-mode=rndwr --num-threads=512 \
--file-block-size=32768 --max-time=60 --max-requests=0 run
Therefore reset tree->last on ordered extent removal only if
it pointed to the ordered extent we're removing from the tree.
Results from 4 runs of the following test before and after
applying this patch:
$ sysbench --test=fileio --file-num=32 --file-total-size=4G \
--file-test-mode=seqwr --num-threads=512 \
--file-block-size=32768 --max-time=60 --file-io-mode=sync prepare
$ sysbench --test=fileio --file-num=32 --file-total-size=4G \
--file-test-mode=seqwr --num-threads=512 \
--file-block-size=32768 --max-time=60 --file-io-mode=sync run
Before this path:
run 1 - 64.049Mb/sec
run 2 - 63.455Mb/sec
run 3 - 64.656Mb/sec
run 4 - 63.833Mb/sec
After this patch:
run 1 - 66.149Mb/sec
run 2 - 68.459Mb/sec
run 3 - 66.338Mb/sec
run 4 - 66.176Mb/sec
With random writes (--file-test-mode=rndwr) I had huge fluctuations
on the results (+- 35% easily).
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Commit b02441999e "Btrfs: don't wait for
the completion of all the ordered extents" introduced a bug that broke
the ordered root list:
WARNING: CPU: 1 PID: 7119 at lib/list_debug.c:59 __list_del_entry+0x5a/0x98()
It is because we forgot to return the roots in the splice list to the
ordered list of the fs. Fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
In btrfs_wait_ordered_range(), if we found an extent to the left
of the start of our desired wait range and the last byte of that
extent is 1 less than the desired range's start, we would would
wait for the IO completion of that extent unnecessarily.
Signed-off-by: Filipe David Borba Manana <fdmanana@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
It is very likely that there are lots of ordered extents in the filesytem,
if we wait for the completion of all of them when we want to reclaim some
space for the metadata space reservation, we would be blocked for a long
time. The performance would drop down suddenly for a long time.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
A user reported a list corruption warning from btrfs_remove_ordered_extent, it
is because we aren't taking the ordered_root_lock when we remove the inode from
the ordered operations list. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
I noticed that if the free space cache has an error writing out it's data it
won't actually error out, it will just carry on. This is because it doesn't
check the return value of btrfs_wait_ordered_range, which didn't actually return
anything. So fix this in order to keep us from making free space cache look
valid when it really isnt. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Comparison of an inode's last modified transaction with the last committed
transaction is incorrect. Fix it.
Signed-off-by: chandan <chandan@linux.vnet.ibm.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
This is a left over of how we used to wait for ordered extents, which was to
grab the inode and then run filemap flush on it. However if we have an ordered
extent then we already are holding a ref on the inode, and we just use
btrfs_start_ordered_extent anyway, so there is no reason to have an extra ref on
the inode to start work on the ordered extent. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
We currently have this problem where you can truncate pages that have not yet
been written for an ordered extent. We do this because the truncate will be
coming behind to clean us up anyway so what's the harm right? Well if truncate
fails for whatever reason we leave an orphan item around for the file to be
cleaned up later. But if the user goes and truncates up the file and tries to
read from the area that had been discarded previously they will get a csum error
because we never actually wrote that data out.
This patch fixes this by allowing us to either discard the ordered extent
completely, by which I mean we just free up the space we had allocated and not
add the file extent, or adjust the length of the file extent we write. We do
this by setting the length we truncated down to in the ordered extent, and then
we set the file extent length and ram bytes to this length. The total disk
space stays unchanged since we may be compressed and we can't just chop off the
disk space, but at least this way the file extent only points to the valid data.
Then when the file extent is free'd the extent and csums will be freed normally.
This patch is needed for the next series which will give us more graceful
recovery of failed truncates. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
u64 is "unsigned long long" on all architectures now, so there's no need to
cast it when formatting it using the "ll" length modifier.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
I added a patch where we started taking the ordered operations mutex when we
waited on ordered extents. We need this because we splice the list and process
it, so if a flusher came in during this scenario it would think the list was
empty and we'd usually get an early ENOSPC. The problem with this is that this
lock is used in transaction committing. So we end up with something like this
Transaction commit
-> wait on writers
Delalloc flusher
-> run_ordered_operations (holds mutex)
->wait for filemap-flush to do its thing
flush task
-> cow_file_range
->wait on btrfs_join_transaction because we're commiting
some other task
-> commit_transaction because we notice trans->transaction->flush is set
-> run_ordered_operations (hang on mutex)
We need to disentangle the ordered operations flushing from the delalloc
flushing, since they are separate things. This solves the deadlock issue I was
seeing. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
Using the structure btrfs_sector_sum to keep the checksum value is
unnecessary, because the extents that btrfs_sector_sum points to are
continuous, we can find out the expected checksums by btrfs_ordered_sum's
bytenr and the offset, so we can remove btrfs_sector_sum's bytenr. After
removing bytenr, there is only one member in the structure, so it makes
no sense to keep the structure, just remove it, and use a u32 array to
store the checksum value.
By this change, we don't use the while loop to get the checksums one by
one. Now, we can get several checksum value at one time, it improved the
performance by ~74% on my SSD (31MB/s -> 54MB/s).
test command:
# dd if=/dev/zero of=/mnt/btrfs/file0 bs=1M count=1024 oflag=sync
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
The reason we introduce per-subvolume ordered extent list is the same
as the per-subvolume delalloc inode list.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
It is very likely that there are several blocks in bio, it is very
inefficient if we get their csums one by one. This patch improves
this problem by getting the csums in batch.
According to the result of the following test, the execute time of
__btrfs_lookup_bio_sums() is down by ~28%(300us -> 217us).
# dd if=<mnt>/file of=/dev/null bs=1M count=1024
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
We need to hold the ordered_operations mutex while waiting on ordered extents
since we splice and run the ordered extents list. We need to make sure anybody
else who wants to wait on ordered extents does actually wait for them to be
completed. This will keep us from bailing out of flushing in case somebody is
already waiting on ordered extents to complete. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Miao made the ordered operations stuff run async, which introduced a
deadlock where we could get somebody (sync) racing in and committing the
transaction while a commit was already happening. The new committer would
try and flush ordered operations which would hang waiting for the commit to
finish because it is done asynchronously and no longer inherits the callers
trans handle. To fix this we need to make the ordered operations list a per
transaction list. We can get new inodes added to the ordered operation list
by truncating them and then having another process writing to them, so this
makes it so that anybody trying to add an ordered operation _must_ start a
transaction in order to add itself to the list, which will keep new inodes
from getting added to the ordered operations list after we start committing.
This should fix the deadlock and also keeps us from doing a lot more work
than we need to during commit. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
btrfs_run_ordered_operations() needn't traverse the ordered operation list
repeatedly, it is because the transaction commiter will invoke it again when
there is no other writer in this transaction, it can ensure that no one can
add new objects into the ordered operation list.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Since we don't actually copy the extent information from the source tree in
the fast case we don't need to wait for ordered io to be completed in order
to fsync, we just need to wait for the io to be completed. So when we're
logging our file just attach all of the ordered extents to the log, and then
when the log syncs just wait for IO_DONE on the ordered extents and then
write the super. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
We specifically do not update the disk i_size if there are ordered extents
outstanding for any area between the current disk_i_size and our ordered
extent so that we do not expose stale data. The problem is the check we
have only checks if the ordered extent starts at or after the current
disk_i_size, which doesn't take into account an ordered extent that starts
before the current disk_i_size and ends past the disk_i_size. Fix this by
checking if the extent ends past the disk_i_size. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
If we have an ordered extent before the ordered extent we are currently
completing that is after the current disk_i_size we will put our i_size
update into that ordered extent so that we do not expose stale data. The
problem is that if our disk i_size is updated past the previous ordered
extent we won't update the i_size with the pending i_size update. So check
the pending i_size update and if its above the current disk i_size we need
to go ahead and try to update. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Though the process of the ordered extents is a bit different with the delalloc inode
flush, but we can see it as a subset of the delalloc inode flush, so we also handle
them by flush workers.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
The process of the ordered operations is similar to the delalloc inode flush, so
we handle them by flush workers.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@fusionio.com>
The ordered extent allocation is in the fast path of the IO, so use a slab
to improve the speed of the allocation.
"Size of the struct is 280, so this will fall into the size-512 bucket,
giving 8 objects per page, while own slab will pack 14 objects into a page.
Another benefit I see is to check for leaked objects when the module is
removed (and the cache destroy takes place)."
-- David Sterba
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
If a snapshot is created while we are writing some data into the file,
the i_size of the corresponding file in the snapshot will be wrong, it will
be beyond the end of the last file extent. And btrfsck will report:
root 256 inode 257 errors 100
Steps to reproduce:
# mkfs.btrfs <partition>
# mount <partition> <mnt>
# cd <mnt>
# dd if=/dev/zero of=tmpfile bs=4M count=1024 &
# for ((i=0; i<4; i++))
> do
> btrfs sub snap . $i
> done
This because the algorithm of disk_i_size update is wrong. Though there are
some ordered extents behind the current one which we use to update disk_i_size,
it doesn't mean those extents will be dealt with in the same transaction. So
We shouldn't use the offset of those extents to update disk_i_size. Or we will
get the wrong i_size in the snapshot.
We fix this problem by recording the max real i_size. If we find there is a
ordered extent which is in front of the current one and doesn't complete, we
will record the end of the current one into that ordered extent. Surely, if
the current extent holds the end of other extent(it must be greater than
the current one because it is behind the current one), we will record the
number that the current extent holds. In this way, we can exclude the ordered
extents that may not be dealth with in the same transaction, and be easy to
know the real disk_i_size.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
The pdflush thread is long gone, so this patch removes references to pdflush
from btrfs comments.
Cc: Chris Mason <chris.mason@fusionio.com>
Cc: linux-btrfs@vger.kernel.org
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
I removed this in an earlier commit and I was wrong. Because compression
can return from filemap_fdatawrite() without having actually set any of it's
pages as writeback() it can make filemap_fdatawait() do essentially nothing,
and then we won't find any ordered extents because they may not have been
created yet. So not only does this make fsync() completely useless, but it
will also screw up if you truncate on a non-page aligned offset since we
zero out the end and then wait on ordered extents and then call drop caches.
We can drop the cache before the io completes and then we try to unpin the
extent we just wrote we won't find it and everything goes sideways. So fix
this by putting it back and put a giant comment there to keep me from trying
to remove it in the future. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
We noticed that the ordered extent completion doesn't really rely on having
a page and that it could be done independantly of ending the writeback on a
page. This patch makes us not do the threaded endio stuff for normal
buffered writes and direct writes so we can end page writeback as soon as
possible (in irq context) and only start threads to do the ordered work when
it is actually done. Compression needs to be reworked some to take
advantage of this as well, but atm it has to do a find_get_page in its endio
handler so it must be done in its own thread. This makes direct writes
quite a bit faster. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
We are checking delalloc to see if it is ok to update the i_size. There are
2 cases it stops us from updating
1) If there is delalloc between our current disk_i_size and this ordered
extent
2) If there is delalloc between our current ordered extent and the next
ordered extent
These tests are racy however since we can set delalloc for these ranges at
any time. Also for the first case if we notice there is delalloc between
disk_i_size and our ordered extent we will not update disk_i_size and assume
that when that delalloc bit gets written out it will update everything
properly. However if we crash before that we will have file extents outside
of our i_size, which is not good, so this test is dangerous as well as racy.
Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
In btrfs_wait_ordered_range we have been calling filemap_fdata_write() twice
because compression does strange things and then waiting. Then we look up
ordered extents and if we find any we will always schedule_timeout(); once
and then loop back around and do it all again. We will even check to see if
there is delalloc pages on this range and loop again. So this patch gets
rid of the multipe fdata_write() calls and just does
filemap_write_and_wait(). In the case of compression we will still find the
ordered extents and start those individually if we need to so that is ok,
but in the normal buffered case we avoid all this weird overhead.
Then in the case of the schedule_timeout(1), we don't need it. All callers
either 1) don't care, they just want to make sure what they just wrote maeks
it to disk or 2) are doing the lock()->lookup ordered->unlock->flush thing
in which case it will lock and check for ordered extents _anyway_ so get
back to them as quickly as possible. The delaloc check is simply not
needed, this only catches the case where we write to the file again since
doing the filemap_write_and_wait() and if the caller truly cares about that
it will take care of everything itself. Thanks,
Signed-off-by: Josef Bacik <josef@redhat.com>
The ordered data and relocation trees have BUG_ONs to protect against
bad tree operations.
This patch replaces them with a panic that will report the problem.
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Tracepoints can provide insight into why btrfs hits bugs and be greatly
helpful for debugging, e.g
dd-7822 [000] 2121.641088: btrfs_inode_request: root = 5(FS_TREE), gen = 4, ino = 256, blocks = 8, disk_i_size = 0, last_trans = 8, logged_trans = 0
dd-7822 [000] 2121.641100: btrfs_inode_new: root = 5(FS_TREE), gen = 8, ino = 257, blocks = 0, disk_i_size = 0, last_trans = 0, logged_trans = 0
btrfs-transacti-7804 [001] 2146.935420: btrfs_cow_block: root = 2(EXTENT_TREE), refs = 2, orig_buf = 29368320 (orig_level = 0), cow_buf = 29388800 (cow_level = 0)
btrfs-transacti-7804 [001] 2146.935473: btrfs_cow_block: root = 1(ROOT_TREE), refs = 2, orig_buf = 29364224 (orig_level = 0), cow_buf = 29392896 (cow_level = 0)
btrfs-transacti-7804 [001] 2146.972221: btrfs_transaction_commit: root = 1(ROOT_TREE), gen = 8
flush-btrfs-2-7821 [001] 2155.824210: btrfs_chunk_alloc: root = 3(CHUNK_TREE), offset = 1103101952, size = 1073741824, num_stripes = 1, sub_stripes = 0, type = DATA
flush-btrfs-2-7821 [001] 2155.824241: btrfs_cow_block: root = 2(EXTENT_TREE), refs = 2, orig_buf = 29388800 (orig_level = 0), cow_buf = 29396992 (cow_level = 0)
flush-btrfs-2-7821 [001] 2155.824255: btrfs_cow_block: root = 4(DEV_TREE), refs = 2, orig_buf = 29372416 (orig_level = 0), cow_buf = 29401088 (cow_level = 0)
flush-btrfs-2-7821 [000] 2155.824329: btrfs_cow_block: root = 3(CHUNK_TREE), refs = 2, orig_buf = 20971520 (orig_level = 0), cow_buf = 20975616 (cow_level = 0)
btrfs-endio-wri-7800 [001] 2155.898019: btrfs_cow_block: root = 5(FS_TREE), refs = 2, orig_buf = 29384704 (orig_level = 0), cow_buf = 29405184 (cow_level = 0)
btrfs-endio-wri-7800 [001] 2155.898043: btrfs_cow_block: root = 7(CSUM_TREE), refs = 2, orig_buf = 29376512 (orig_level = 0), cow_buf = 29409280 (cow_level = 0)
Here is what I have added:
1) ordere_extent:
btrfs_ordered_extent_add
btrfs_ordered_extent_remove
btrfs_ordered_extent_start
btrfs_ordered_extent_put
These provide critical information to understand how ordered_extents are
updated.
2) extent_map:
btrfs_get_extent
extent_map is used in both read and write cases, and it is useful for tracking
how btrfs specific IO is running.
3) writepage:
__extent_writepage
btrfs_writepage_end_io_hook
Pages are cirtical resourses and produce a lot of corner cases during writeback,
so it is valuable to know how page is written to disk.
4) inode:
btrfs_inode_new
btrfs_inode_request
btrfs_inode_evict
These can show where and when a inode is created, when a inode is evicted.
5) sync:
btrfs_sync_file
btrfs_sync_fs
These show sync arguments.
6) transaction:
btrfs_transaction_commit
In transaction based filesystem, it will be useful to know the generation and
who does commit.
7) back reference and cow:
btrfs_delayed_tree_ref
btrfs_delayed_data_ref
btrfs_delayed_ref_head
btrfs_cow_block
Btrfs natively supports back references, these tracepoints are helpful on
understanding btrfs's COW mechanism.
8) chunk:
btrfs_chunk_alloc
btrfs_chunk_free
Chunk is a link between physical offset and logical offset, and stands for space
infomation in btrfs, and these are helpful on tracing space things.
9) reserved_extent:
btrfs_reserved_extent_alloc
btrfs_reserved_extent_free
These can show how btrfs uses its space.
Signed-off-by: Liu Bo <liubo2009@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
This one isn't really an uninit variable, but for pretty
obscure reasons. Let's make it clearly correct.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Make the code aware of compression type, instead of always assuming
zlib compression.
Also make the zlib workspace function as common code for all
compression types.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
The new DIO bio splitting code has problems when the bio
spans more than one ordered extent. This will happen as the
generic DIO code merges our get_blocks calls together into
a bigger single bio.
This fixes things by walking forward in the ordered extent
code finding all the overlapping ordered extents and completing them
all at once.
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Josef Bacik
Filipe Manana
Liu Bo
Chris Mason
David Sterba
Miao Xie
Qu Wenruo
Frank Holton
Filipe David Borba Manana
Josef Bacik
chandan
Geert Uytterhoeven
Artem Bityutskiy
Josef Bacik
Jeff Mahoney
liubo
Chris Mason
Li Zefan