Patch series "mm/vmscan: calculate reclaimed slab in all reclaim paths".
This patchset is to fix the issues in doing shrink slab.
There're six different reclaim paths by now,
- kswapd reclaim path
- node reclaim path
- hibernate preallocate memory reclaim path
- direct reclaim path
- memcg reclaim path
- memcg softlimit reclaim path
The slab caches reclaimed in these paths are only calculated in the
above three paths. The issues are detailed explained in patch #2. We
should calculate the reclaimed slab caches in every reclaim path. In
order to do it, the struct reclaim_state is placed into the struct
shrink_control.
In node reclaim path, there'is another issue about shrinking slab, which
is adressed in "mm/vmscan: shrink slab in node reclaim"
(https://lore.kernel.org/linux-mm/1559874946-22960-1-git-send-email-laoar.shao@gmail.com/).
This patch (of 2):
The struct reclaim_state is used to record how many slab caches are
reclaimed in one reclaim path. The struct shrink_control is used to
control one reclaim path. So we'd better put reclaim_state into
shrink_control.
[laoar.shao@gmail.com: remove reclaim_state assignment from __perform_reclaim()]
Link: http://lkml.kernel.org/r/1561381582-13697-1-git-send-email-laoar.shao@gmail.com
Link: http://lkml.kernel.org/r/1561112086-6169-2-git-send-email-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit bd4c82c22c ("mm, THP, swap: delay splitting THP after swapped
out"), THP can be swapped out in a whole. But, nr_reclaimed and some
other vm counters still get inc'ed by one even though a whole THP (512
pages) gets swapped out.
This doesn't make too much sense to memory reclaim.
For example, direct reclaim may just need reclaim SWAP_CLUSTER_MAX
pages, reclaiming one THP could fulfill it. But, if nr_reclaimed is not
increased correctly, direct reclaim may just waste time to reclaim more
pages, SWAP_CLUSTER_MAX * 512 pages in worst case.
And, it may cause pgsteal_{kswapd|direct} is greater than
pgscan_{kswapd|direct}, like the below:
pgsteal_kswapd 122933
pgsteal_direct 26600225
pgscan_kswapd 174153
pgscan_direct 14678312
nr_reclaimed and nr_scanned must be fixed in parallel otherwise it would
break some page reclaim logic, e.g.
vmpressure: this looks at the scanned/reclaimed ratio so it won't change
semantics as long as scanned & reclaimed are fixed in parallel.
compaction/reclaim: compaction wants a certain number of physical pages
freed up before going back to compacting.
kswapd priority raising: kswapd raises priority if we scan fewer pages
than the reclaim target (which itself is obviously expressed in order-0
pages). As a result, kswapd can falsely raise its aggressiveness even
when it's making great progress.
Other than nr_scanned and nr_reclaimed, some other counters, e.g.
pgactivate, nr_skipped, nr_ref_keep and nr_unmap_fail need to be fixed too
since they are user visible via cgroup, /proc/vmstat or trace points,
otherwise they would be underreported.
When isolating pages from LRUs, nr_taken has been accounted in base page,
but nr_scanned and nr_skipped are still accounted in THP. It doesn't make
too much sense too since this may cause trace point underreport the
numbers as well.
So accounting those counters in base page instead of accounting THP as one
page.
nr_dirty, nr_unqueued_dirty, nr_congested and nr_writeback are used by
file cache, so they are not impacted by THP swap.
This change may result in lower steal/scan ratio in some cases since THP
may get split during page reclaim, then a part of tail pages get reclaimed
instead of the whole 512 pages, but nr_scanned is accounted by 512,
particularly for direct reclaim. But, this should be not a significant
issue.
Link: http://lkml.kernel.org/r/1559025859-72759-2-git-send-email-yang.shi@linux.alibaba.com
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Reviewed-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 9092c71bb7 ("mm: use sc->priority for slab shrink targets") has
broken up the relationship between sc->nr_scanned and slab pressure.
The sc->nr_scanned can't double slab pressure anymore. So, it sounds no
sense to still keep sc->nr_scanned inc'ed. Actually, it would prevent
from adding pressure on slab shrink since excessive sc->nr_scanned would
prevent from scan->priority raise.
The bonnie test doesn't show this would change the behavior of slab
shrinkers.
w/ w/o
/sec %CP /sec %CP
Sequential delete: 3960.6 94.6 3997.6 96.2
Random delete: 2518 63.8 2561.6 64.6
The slight increase of "/sec" without the patch would be caused by the
slight increase of CPU usage.
Link: http://lkml.kernel.org/r/1559025859-72759-1-git-send-email-yang.shi@linux.alibaba.com
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When file refaults are detected and there are many inactive file pages,
the system never reclaim anonymous pages, the file pages are dropped
aggressively when there are still a lot of cold anonymous pages and
system thrashes. This issue impacts the performance of applications
with large executable, e.g. chrome.
With this patch, when file refault is detected, inactive_list_is_low()
always returns true for file pages in get_scan_count() to enable
scanning anonymous pages.
The problem can be reproduced by the following test program.
---8<---
void fallocate_file(const char *filename, off_t size)
{
struct stat st;
int fd;
if (!stat(filename, &st) && st.st_size >= size)
return;
fd = open(filename, O_WRONLY | O_CREAT, 0600);
if (fd < 0) {
perror("create file");
exit(1);
}
if (posix_fallocate(fd, 0, size)) {
perror("fallocate");
exit(1);
}
close(fd);
}
long *alloc_anon(long size)
{
long *start = malloc(size);
memset(start, 1, size);
return start;
}
long access_file(const char *filename, long size, long rounds)
{
int fd, i;
volatile char *start1, *end1, *start2;
const int page_size = getpagesize();
long sum = 0;
fd = open(filename, O_RDONLY);
if (fd == -1) {
perror("open");
exit(1);
}
/*
* Some applications, e.g. chrome, use a lot of executable file
* pages, map some of the pages with PROT_EXEC flag to simulate
* the behavior.
*/
start1 = mmap(NULL, size / 2, PROT_READ | PROT_EXEC, MAP_SHARED,
fd, 0);
if (start1 == MAP_FAILED) {
perror("mmap");
exit(1);
}
end1 = start1 + size / 2;
start2 = mmap(NULL, size / 2, PROT_READ, MAP_SHARED, fd, size / 2);
if (start2 == MAP_FAILED) {
perror("mmap");
exit(1);
}
for (i = 0; i < rounds; ++i) {
struct timeval before, after;
volatile char *ptr1 = start1, *ptr2 = start2;
gettimeofday(&before, NULL);
for (; ptr1 < end1; ptr1 += page_size, ptr2 += page_size)
sum += *ptr1 + *ptr2;
gettimeofday(&after, NULL);
printf("File access time, round %d: %f (sec)
", i,
(after.tv_sec - before.tv_sec) +
(after.tv_usec - before.tv_usec) / 1000000.0);
}
return sum;
}
int main(int argc, char *argv[])
{
const long MB = 1024 * 1024;
long anon_mb, file_mb, file_rounds;
const char filename[] = "large";
long *ret1;
long ret2;
if (argc != 4) {
printf("usage: thrash ANON_MB FILE_MB FILE_ROUNDS
");
exit(0);
}
anon_mb = atoi(argv[1]);
file_mb = atoi(argv[2]);
file_rounds = atoi(argv[3]);
fallocate_file(filename, file_mb * MB);
printf("Allocate %ld MB anonymous pages
", anon_mb);
ret1 = alloc_anon(anon_mb * MB);
printf("Access %ld MB file pages
", file_mb);
ret2 = access_file(filename, file_mb * MB, file_rounds);
printf("Print result to prevent optimization: %ld
",
*ret1 + ret2);
return 0;
}
---8<---
Running the test program on 2GB RAM VM with kernel 5.2.0-rc5, the program
fills ram with 2048 MB memory, access a 200 MB file for 10 times. Without
this patch, the file cache is dropped aggresively and every access to the
file is from disk.
$ ./thrash 2048 200 10
Allocate 2048 MB anonymous pages
Access 200 MB file pages
File access time, round 0: 2.489316 (sec)
File access time, round 1: 2.581277 (sec)
File access time, round 2: 2.487624 (sec)
File access time, round 3: 2.449100 (sec)
File access time, round 4: 2.420423 (sec)
File access time, round 5: 2.343411 (sec)
File access time, round 6: 2.454833 (sec)
File access time, round 7: 2.483398 (sec)
File access time, round 8: 2.572701 (sec)
File access time, round 9: 2.493014 (sec)
With this patch, these file pages can be cached.
$ ./thrash 2048 200 10
Allocate 2048 MB anonymous pages
Access 200 MB file pages
File access time, round 0: 2.475189 (sec)
File access time, round 1: 2.440777 (sec)
File access time, round 2: 2.411671 (sec)
File access time, round 3: 1.955267 (sec)
File access time, round 4: 0.029924 (sec)
File access time, round 5: 0.000808 (sec)
File access time, round 6: 0.000771 (sec)
File access time, round 7: 0.000746 (sec)
File access time, round 8: 0.000738 (sec)
File access time, round 9: 0.000747 (sec)
Checked the swap out stats during the test [1], 19006 pages swapped out
with this patch, 3418 pages swapped out without this patch. There are
more swap out, but I think it's within reasonable range when file backed
data set doesn't fit into the memory.
$ ./thrash 2000 100 2100 5 1 # ANON_MB FILE_EXEC FILE_NOEXEC ROUNDS
PROCESSES Allocate 2000 MB anonymous pages active_anon: 1613644,
inactive_anon: 348656, active_file: 892, inactive_file: 1384 (kB)
pswpout: 7972443, pgpgin: 478615246 Access 100 MB executable file pages
Access 2100 MB regular file pages File access time, round 0: 12.165,
(sec) active_anon: 1433788, inactive_anon: 478116, active_file: 17896,
inactive_file: 24328 (kB) File access time, round 1: 11.493, (sec)
active_anon: 1430576, inactive_anon: 477144, active_file: 25440,
inactive_file: 26172 (kB) File access time, round 2: 11.455, (sec)
active_anon: 1427436, inactive_anon: 476060, active_file: 21112,
inactive_file: 28808 (kB) File access time, round 3: 11.454, (sec)
active_anon: 1420444, inactive_anon: 473632, active_file: 23216,
inactive_file: 35036 (kB) File access time, round 4: 11.479, (sec)
active_anon: 1413964, inactive_anon: 471460, active_file: 31728,
inactive_file: 32224 (kB) pswpout: 7991449 (+ 19006), pgpgin: 489924366
(+ 11309120)
With 4 processes accessing non-overlapping parts of a large file, 30316
pages swapped out with this patch, 5152 pages swapped out without this
patch. The swapout number is small comparing to pgpgin.
[1]: https://github.com/vovo/testing/blob/master/mem_thrash.c
Link: http://lkml.kernel.org/r/20190701081038.GA83398@google.com
Fixes: e986850598 ("mm,vmscan: only evict file pages when we have plenty")
Fixes: 7c5bd705d8 ("mm: memcg: only evict file pages when we have plenty")
Signed-off-by: Kuo-Hsin Yang <vovoy@chromium.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Sonny Rao <sonnyrao@chromium.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Rik van Riel <riel@redhat.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: <stable@vger.kernel.org> [4.12+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In production we have noticed hard lockups on large machines running
large jobs due to kswaps hoarding lru lock within isolate_lru_pages when
sc->reclaim_idx is 0 which is a small zone. The lru was couple hundred
GiBs and the condition (page_zonenum(page) > sc->reclaim_idx) in
isolate_lru_pages() was basically skipping GiBs of pages while holding
the LRU spinlock with interrupt disabled.
On further inspection, it seems like there are two issues:
(1) If kswapd on the return from balance_pgdat() could not sleep (i.e.
node is still unbalanced), the classzone_idx is unintentionally set
to 0 and the whole reclaim cycle of kswapd will try to reclaim only
the lowest and smallest zone while traversing the whole memory.
(2) Fundamentally isolate_lru_pages() is really bad when the
allocation has woken kswapd for a smaller zone on a very large machine
running very large jobs. It can hoard the LRU spinlock while skipping
over 100s of GiBs of pages.
This patch only fixes (1). (2) needs a more fundamental solution. To
fix (1), in the kswapd context, if pgdat->kswapd_classzone_idx is
invalid use the classzone_idx of the previous kswapd loop otherwise use
the one the waker has requested.
Link: http://lkml.kernel.org/r/20190701201847.251028-1-shakeelb@google.com
Fixes: e716f2eb24 ("mm, vmscan: prevent kswapd sleeping prematurely due to mismatched classzone_idx")
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Yang Shi <yang.shi@linux.alibaba.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Hillf Danton <hdanton@sina.com>
Cc: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There was the below bug report from Wu Fangsuo.
On the CMA allocation path, isolate_migratepages_range() could isolate
unevictable LRU pages and reclaim_clean_page_from_list() can try to
reclaim them if they are clean file-backed pages.
page:ffffffbf02f33b40 count:86 mapcount:84 mapping:ffffffc08fa7a810 index:0x24
flags: 0x19040c(referenced|uptodate|arch_1|mappedtodisk|unevictable|mlocked)
raw: 000000000019040c ffffffc08fa7a810 0000000000000024 0000005600000053
raw: ffffffc009b05b20 ffffffc009b05b20 0000000000000000 ffffffc09bf3ee80
page dumped because: VM_BUG_ON_PAGE(PageLRU(page) || PageUnevictable(page))
page->mem_cgroup:ffffffc09bf3ee80
------------[ cut here ]------------
kernel BUG at /home/build/farmland/adroid9.0/kernel/linux/mm/vmscan.c:1350!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
Modules linked in:
CPU: 0 PID: 7125 Comm: syz-executor Tainted: G S 4.14.81 #3
Hardware name: ASR AQUILAC EVB (DT)
task: ffffffc00a54cd00 task.stack: ffffffc009b00000
PC is at shrink_page_list+0x1998/0x3240
LR is at shrink_page_list+0x1998/0x3240
pc : [<ffffff90083a2158>] lr : [<ffffff90083a2158>] pstate: 60400045
sp : ffffffc009b05940
..
shrink_page_list+0x1998/0x3240
reclaim_clean_pages_from_list+0x3c0/0x4f0
alloc_contig_range+0x3bc/0x650
cma_alloc+0x214/0x668
ion_cma_allocate+0x98/0x1d8
ion_alloc+0x200/0x7e0
ion_ioctl+0x18c/0x378
do_vfs_ioctl+0x17c/0x1780
SyS_ioctl+0xac/0xc0
Wu found it's due to commit ad6b67041a ("mm: remove SWAP_MLOCK in
ttu"). Before that, unevictable pages go to cull_mlocked so that we
can't reach the VM_BUG_ON_PAGE line.
To fix the issue, this patch filters out unevictable LRU pages from the
reclaim_clean_pages_from_list in CMA.
Link: http://lkml.kernel.org/r/20190524071114.74202-1-minchan@kernel.org
Fixes: ad6b67041a ("mm: remove SWAP_MLOCK in ttu")
Signed-off-by: Minchan Kim <minchan@kernel.org>
Reported-by: Wu Fangsuo <fangsuowu@asrmicro.com>
Debugged-by: Wu Fangsuo <fangsuowu@asrmicro.com>
Tested-by: Wu Fangsuo <fangsuowu@asrmicro.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Pankaj Suryawanshi <pankaj.suryawanshi@einfochips.com>
Cc: <stable@vger.kernel.org> [4.12+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Johannes pointed out that after commit 886cf1901d ("mm: move
recent_rotated pages calculation to shrink_inactive_list()") we lost all
zone_reclaim_stat::recent_rotated history.
This fixes it.
Link: http://lkml.kernel.org/r/155905972210.26456.11178359431724024112.stgit@localhost.localdomain
Fixes: 886cf1901d ("mm: move recent_rotated pages calculation to shrink_inactive_list()")
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Reported-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Daniel Jordan <daniel.m.jordan@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm: memcontrol: memory.stat cost & correctness".
The cgroup memory.stat file holds recursive statistics for the entire
subtree. The current implementation does this tree walk on-demand
whenever the file is read. This is giving us problems in production.
1. The cost of aggregating the statistics on-demand is high. A lot of
system service cgroups are mostly idle and their stats don't change
between reads, yet we always have to check them. There are also always
some lazily-dying cgroups sitting around that are pinned by a handful
of remaining page cache; the same applies to them.
In an application that periodically monitors memory.stat in our
fleet, we have seen the aggregation consume up to 5% CPU time.
2. When cgroups die and disappear from the cgroup tree, so do their
accumulated vm events. The result is that the event counters at
higher-level cgroups can go backwards and confuse some of our
automation, let alone people looking at the graphs over time.
To address both issues, this patch series changes the stat
implementation to spill counts upwards when the counters change.
The upward spilling is batched using the existing per-cpu cache. In a
sparse file stress test with 5 level cgroup nesting, the additional cost
of the flushing was negligible (a little under 1% of CPU at 100% CPU
utilization, compared to the 5% of reading memory.stat during regular
operation).
This patch (of 4):
memcg_page_state(), lruvec_page_state(), memcg_sum_events() are
currently returning the state of the local memcg or lruvec, not the
recursive state.
In practice there is a demand for both versions, although the callers
that want the recursive counts currently sum them up by hand.
Per default, cgroups are considered recursive entities and generally we
expect more users of the recursive counters, with the local counts being
special cases. To reflect that in the name, add a _local suffix to the
current implementations.
The following patch will re-incarnate these functions with recursive
semantics, but with an O(1) implementation.
[hannes@cmpxchg.org: fix bisection hole]
Link: http://lkml.kernel.org/r/20190417160347.GC23013@cmpxchg.org
Link: http://lkml.kernel.org/r/20190412151507.2769-2-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Roman Gushchin <guro@fb.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We can use __count_memcg_events() directly because this callsite is alreay
protected by spin_lock_irq().
Link: http://lkml.kernel.org/r/1556093494-30798-1-git-send-email-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This merges together duplicated patterns of code. Also, replace
count_memcg_events() with its irq-careless namesake, because they are
already called in interrupts disabled context.
Link: http://lkml.kernel.org/r/2ece1df4-2989-bc9b-6172-61e9fdde5bfd@virtuozzo.com
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are three tracepoints using this template, which are
mm_vmscan_direct_reclaim_begin,
mm_vmscan_memcg_reclaim_begin,
mm_vmscan_memcg_softlimit_reclaim_begin.
Regarding mm_vmscan_direct_reclaim_begin,
sc.may_writepage is !laptop_mode, that's a static setting, and
reclaim_idx is derived from gfp_mask which is already show in this
tracepoint.
Regarding mm_vmscan_memcg_reclaim_begin,
may_writepage is !laptop_mode too, and reclaim_idx is (MAX_NR_ZONES-1),
which are both static value.
mm_vmscan_memcg_softlimit_reclaim_begin is the same with
mm_vmscan_memcg_reclaim_begin.
So we can drop them all.
Link: http://lkml.kernel.org/r/1553736322-32235-1-git-send-email-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Instead of adding up the zone counters, use lruvec_page_state() to get the
node state directly. This is a bit cheaper and more stream-lined.
Link: http://lkml.kernel.org/r/20190228163020.24100-3-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Roman Gushchin <guro@fb.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The page alloc fast path it may perform node reclaim, which may cause a
latency spike. We should add tracepoint for this event, and also measure
the latency it causes.
So bellow two tracepoints are introduced,
mm_vmscan_node_reclaim_begin
mm_vmscan_node_reclaim_end
Link: http://lkml.kernel.org/r/1551421452-5385-1-git-send-email-laoar.shao@gmail.com
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Cc: <shaoyafang@didiglobal.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This combines two similar functions move_active_pages_to_lru() and
putback_inactive_pages() into single move_pages_to_lru(). This remove
duplicate code and makes object file size smaller.
Before:
text data bss dec hex filename
57082 4732 128 61942 f1f6 mm/vmscan.o
After:
text data bss dec hex filename
55112 4600 128 59840 e9c0 mm/vmscan.o
Note, that now we are checking for !page_evictable() coming from
shrink_active_list(), which shouldn't change any behavior since that path
works with evictable pages only.
Link: http://lkml.kernel.org/r/155290129627.31489.8321971028677203248.stgit@localhost.localdomain
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We may use input argument list as output argument too. This makes the
function more similar to putback_inactive_pages().
Link: http://lkml.kernel.org/r/155290129079.31489.16180612694090502942.stgit@localhost.localdomain
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm: Generalize putback functions"]
putback_inactive_pages() and move_active_pages_to_lru() are almost
similar, so this patchset merges them ina single function.
This patch (of 4):
The patch moves the calculation from putback_inactive_pages() to
shrink_inactive_list(). This makes putback_inactive_pages() looking more
similar to move_active_pages_to_lru().
To do that, we account activated pages in reclaim_stat::nr_activate.
Since a page may change its LRU type from anon to file cache inside
shrink_page_list() (see ClearPageSwapBacked()), we have to account pages
for the both types. So, nr_activate becomes an array.
Previously we used nr_activate to account PGACTIVATE events, but now we
account them into pgactivate variable (since they are about number of
pages in general, not about sum of hpage_nr_pages).
Link: http://lkml.kernel.org/r/155290127956.31489.3393586616054413298.stgit@localhost.localdomain
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-----BEGIN PGP SIGNATURE-----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=WZfC
-----END PGP SIGNATURE-----
Merge tag 'printk-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk
Pull printk updates from Petr Mladek:
- Allow state reset of printk_once() calls.
- Prevent crashes when dereferencing invalid pointers in vsprintf().
Only the first byte is checked for simplicity.
- Make vsprintf warnings consistent and inlined.
- Treewide conversion of obsolete %pf, %pF to %ps, %pF printf
modifiers.
- Some clean up of vsprintf and test_printf code.
* tag 'printk-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/pmladek/printk:
lib/vsprintf: Make function pointer_string static
vsprintf: Limit the length of inlined error messages
vsprintf: Avoid confusion between invalid address and value
vsprintf: Prevent crash when dereferencing invalid pointers
vsprintf: Consolidate handling of unknown pointer specifiers
vsprintf: Factor out %pO handler as kobject_string()
vsprintf: Factor out %pV handler as va_format()
vsprintf: Factor out %p[iI] handler as ip_addr_string()
vsprintf: Do not check address of well-known strings
vsprintf: Consistent %pK handling for kptr_restrict == 0
vsprintf: Shuffle restricted_pointer()
printk: Tie printk_once / printk_deferred_once into .data.once for reset
treewide: Switch printk users from %pf and %pF to %ps and %pS, respectively
lib/test_printf: Switch to bitmap_zalloc()
During !CONFIG_CGROUP reclaim, we expand the inactive list size if it's
thrashing on the node that is about to be reclaimed. But when cgroups
are enabled, we suddenly ignore the node scope and use the cgroup scope
only. The result is that pressure bleeds between NUMA nodes depending
on whether cgroups are merely compiled into Linux. This behavioral
difference is unexpected and undesirable.
When the refault adaptivity of the inactive list was first introduced,
there were no statistics at the lruvec level - the intersection of node
and memcg - so it was better than nothing.
But now that we have that infrastructure, use lruvec_page_state() to
make the list balancing decision always NUMA aware.
[hannes@cmpxchg.org: fix bisection hole]
Link: http://lkml.kernel.org/r/20190417155241.GB23013@cmpxchg.org
Link: http://lkml.kernel.org/r/20190412144438.2645-1-hannes@cmpxchg.org
Fixes: 2a2e48854d ("mm: vmscan: fix IO/refault regression in cache workingset transition")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We have common pattern to access lru_lock from a page pointer:
zone_lru_lock(page_zone(page))
Which is silly, because it unfolds to this:
&NODE_DATA(page_to_nid(page))->node_zones[page_zonenum(page)]->zone_pgdat->lru_lock
while we can simply do
&NODE_DATA(page_to_nid(page))->lru_lock
Remove zone_lru_lock() function, since it's only complicate things. Use
'page_pgdat(page)->lru_lock' pattern instead.
[aryabinin@virtuozzo.com: a slightly better version of __split_huge_page()]
Link: http://lkml.kernel.org/r/20190301121651.7741-1-aryabinin@virtuozzo.com
Link: http://lkml.kernel.org/r/20190228083329.31892-2-aryabinin@virtuozzo.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
workingset_eviction() doesn't use and never did use the @mapping
argument. Remove it.
Link: http://lkml.kernel.org/r/20190228083329.31892-1-aryabinin@virtuozzo.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Rik van Riel <riel@surriel.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: William Kucharski <william.kucharski@oracle.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On path shrink_inactive_list() ---> shrink_page_list() we allocate stack
variables for the statistics twice. This is completely useless, and
this just consumes stack much more, then we really need.
The patch kills duplicate stack variables from shrink_page_list(), and
this reduce stack usage and object file size significantly:
Stack usage:
Before: vmscan.c:1122:22:shrink_page_list 648 static
After: vmscan.c:1122:22:shrink_page_list 616 static
Size of vmscan.o:
text data bss dec hex filename
Before: 56866 4720 128 61714 f112 mm/vmscan.o
After: 56770 4720 128 61618 f0b2 mm/vmscan.o
Link: http://lkml.kernel.org/r/154894900030.5211.12104993874109647641.stgit@localhost.localdomain
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In current implementation, both kswapd and direct reclaim has to iterate
all mem cgroups. It is not a problem before offline mem cgroups could
be iterated. But, currently with iterating offline mem cgroups, it
could be very time consuming. In our workloads, we saw over 400K mem
cgroups accumulated in some cases, only a few hundred are online memcgs.
Although kswapd could help out to reduce the number of memcgs, direct
reclaim still get hit with iterating a number of offline memcgs in some
cases. We experienced the responsiveness problems due to this
occassionally.
A simple test with pref shows it may take around 220ms to iterate 8K
memcgs in direct reclaim:
dd 13873 [011] 578.542919: vmscan:mm_vmscan_direct_reclaim_begin
dd 13873 [011] 578.758689: vmscan:mm_vmscan_direct_reclaim_end
So for 400K, it may take around 11 seconds to iterate all memcgs.
Here just break the iteration once it reclaims enough pages as what
memcg direct reclaim does. This may hurt the fairness among memcgs.
But the cached iterator cookie could help to achieve the fairness more
or less.
Link: http://lkml.kernel.org/r/1548799877-10949-1-git-send-email-yang.shi@linux.alibaba.com
Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We may simply check for sc->may_unmap in isolate_lru_pages() instead of
doing that in both of its callers.
Link: http://lkml.kernel.org/r/154748280735.29962.15867846875217618569.stgit@localhost.localdomain
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
No functional change.
Link: http://lkml.kernel.org/r/20190118235123.27843-1-richard.weiyang@gmail.com
Signed-off-by: Wei Yang <richard.weiyang@gmail.com>
Reviewed-by: Pekka Enberg <penberg@kernel.org>
Acked-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit 172b06c32b ("mm: slowly shrink slabs with a
relatively small number of objects").
This change changes the agressiveness of shrinker reclaim, causing small
cache and low priority reclaim to greatly increase scanning pressure on
small caches. As a result, light memory pressure has a disproportionate
affect on small caches, and causes large caches to be reclaimed much
faster than previously.
As a result, it greatly perturbs the delicate balance of the VFS caches
(dentry/inode vs file page cache) such that the inode/dentry caches are
reclaimed much, much faster than the page cache and this drives us into
several other caching imbalance related problems.
As such, this is a bad change and needs to be reverted.
[ Needs some massaging to retain the later seekless shrinker
modifications.]
Link: http://lkml.kernel.org/r/20190130041707.27750-3-david@fromorbit.com
Fixes: 172b06c32b ("mm: slowly shrink slabs with a relatively small number of objects")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Cc: Wolfgang Walter <linux@stwm.de>
Cc: Roman Gushchin <guro@fb.com>
Cc: Spock <dairinin@gmail.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Waiting on a page migration entry has used wait_on_page_locked() all along
since 2006: but you cannot safely wait_on_page_locked() without holding a
reference to the page, and that extra reference is enough to make
migrate_page_move_mapping() fail with -EAGAIN, when a racing task faults
on the entry before migrate_page_move_mapping() gets there.
And that failure is retried nine times, amplifying the pain when trying to
migrate a popular page. With a single persistent faulter, migration
sometimes succeeds; with two or three concurrent faulters, success becomes
much less likely (and the more the page was mapped, the worse the overhead
of unmapping and remapping it on each try).
This is especially a problem for memory offlining, where the outer level
retries forever (or until terminated from userspace), because a heavy
refault workload can trigger an endless loop of migration failures.
wait_on_page_locked() is the wrong tool for the job.
David Herrmann (but was he the first?) noticed this issue in 2014:
https://marc.info/?l=linux-mm&m=140110465608116&w=2
Tim Chen started a thread in August 2017 which appears relevant:
https://marc.info/?l=linux-mm&m=150275941014915&w=2 where Kan Liang went
on to implicate __migration_entry_wait():
https://marc.info/?l=linux-mm&m=150300268411980&w=2 and the thread ended
up with the v4.14 commits: 2554db9165 ("sched/wait: Break up long wake
list walk") 11a19c7b09 ("sched/wait: Introduce wakeup boomark in
wake_up_page_bit")
Baoquan He reported "Memory hotplug softlock issue" 14 November 2018:
https://marc.info/?l=linux-mm&m=154217936431300&w=2
We have all assumed that it is essential to hold a page reference while
waiting on a page lock: partly to guarantee that there is still a struct
page when MEMORY_HOTREMOVE is configured, but also to protect against
reuse of the struct page going to someone who then holds the page locked
indefinitely, when the waiter can reasonably expect timely unlocking.
But in fact, so long as wait_on_page_bit_common() does the put_page(), and
is careful not to rely on struct page contents thereafter, there is no
need to hold a reference to the page while waiting on it. That does mean
that this case cannot go back through the loop: but that's fine for the
page migration case, and even if used more widely, is limited by the "Stop
walking if it's locked" optimization in wake_page_function().
Add interface put_and_wait_on_page_locked() to do this, using "behavior"
enum in place of "lock" arg to wait_on_page_bit_common() to implement it.
No interruptible or killable variant needed yet, but they might follow: I
have a vague notion that reporting -EINTR should take precedence over
return from wait_on_page_bit_common() without knowing the page state, so
arrange it accordingly - but that may be nothing but pedantic.
__migration_entry_wait() still has to take a brief reference to the page,
prior to calling put_and_wait_on_page_locked(): but now that it is dropped
before waiting, the chance of impeding page migration is very much
reduced. Should we perhaps disable preemption across this?
shrink_page_list()'s __ClearPageLocked(): that was a surprise! This
survived a lot of testing before that showed up. PageWaiters may have
been set by wait_on_page_bit_common(), and the reference dropped, just
before shrink_page_list() succeeds in freezing its last page reference: in
such a case, unlock_page() must be used. Follow the suggestion from
Michal Hocko, just revert a978d6f521 ("mm: unlockless reclaim") now:
that optimization predates PageWaiters, and won't buy much these days; but
we can reinstate it for the !PageWaiters case if anyone notices.
It does raise the question: should vmscan.c's is_page_cache_freeable() and
__remove_mapping() now treat a PageWaiters page as if an extra reference
were held? Perhaps, but I don't think it matters much, since
shrink_page_list() already had to win its trylock_page(), so waiters are
not very common there: I noticed no difference when trying the bigger
change, and it's surely not needed while put_and_wait_on_page_locked() is
only used for page migration.
[willy@infradead.org: add put_and_wait_on_page_locked() kerneldoc]
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1811261121330.1116@eggly.anvils
Signed-off-by: Hugh Dickins <hughd@google.com>
Reported-by: Baoquan He <bhe@redhat.com>
Tested-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
An external fragmentation event was previously described as
When the page allocator fragments memory, it records the event using
the mm_page_alloc_extfrag event. If the fallback_order is smaller
than a pageblock order (order-9 on 64-bit x86) then it's considered
an event that will cause external fragmentation issues in the future.
The kernel reduces the probability of such events by increasing the
watermark sizes by calling set_recommended_min_free_kbytes early in the
lifetime of the system. This works reasonably well in general but if
there are enough sparsely populated pageblocks then the problem can still
occur as enough memory is free overall and kswapd stays asleep.
This patch introduces a watermark_boost_factor sysctl that allows a zone
watermark to be temporarily boosted when an external fragmentation causing
events occurs. The boosting will stall allocations that would decrease
free memory below the boosted low watermark and kswapd is woken if the
calling context allows to reclaim an amount of memory relative to the size
of the high watermark and the watermark_boost_factor until the boost is
cleared. When kswapd finishes, it wakes kcompactd at the pageblock order
to clean some of the pageblocks that may have been affected by the
fragmentation event. kswapd avoids any writeback, slab shrinkage and swap
from reclaim context during this operation to avoid excessive system
disruption in the name of fragmentation avoidance. Care is taken so that
kswapd will do normal reclaim work if the system is really low on memory.
This was evaluated using the same workloads as "mm, page_alloc: Spread
allocations across zones before introducing fragmentation".
1-socket Skylake machine
config-global-dhp__workload_thpfioscale XFS (no special madvise)
4 fio threads, 1 THP allocating thread
--------------------------------------
4.20-rc3 extfrag events < order 9: 804694
4.20-rc3+patch: 408912 (49% reduction)
4.20-rc3+patch1-4: 18421 (98% reduction)
4.20.0-rc3 4.20.0-rc3
lowzone-v5r8 boost-v5r8
Amean fault-base-1 653.58 ( 0.00%) 652.71 ( 0.13%)
Amean fault-huge-1 0.00 ( 0.00%) 178.93 * -99.00%*
4.20.0-rc3 4.20.0-rc3
lowzone-v5r8 boost-v5r8
Percentage huge-1 0.00 ( 0.00%) 5.12 ( 100.00%)
Note that external fragmentation causing events are massively reduced by
this path whether in comparison to the previous kernel or the vanilla
kernel. The fault latency for huge pages appears to be increased but that
is only because THP allocations were successful with the patch applied.
1-socket Skylake machine
global-dhp__workload_thpfioscale-madvhugepage-xfs (MADV_HUGEPAGE)
-----------------------------------------------------------------
4.20-rc3 extfrag events < order 9: 291392
4.20-rc3+patch: 191187 (34% reduction)
4.20-rc3+patch1-4: 13464 (95% reduction)
thpfioscale Fault Latencies
4.20.0-rc3 4.20.0-rc3
lowzone-v5r8 boost-v5r8
Min fault-base-1 912.00 ( 0.00%) 905.00 ( 0.77%)
Min fault-huge-1 127.00 ( 0.00%) 135.00 ( -6.30%)
Amean fault-base-1 1467.55 ( 0.00%) 1481.67 ( -0.96%)
Amean fault-huge-1 1127.11 ( 0.00%) 1063.88 * 5.61%*
4.20.0-rc3 4.20.0-rc3
lowzone-v5r8 boost-v5r8
Percentage huge-1 77.64 ( 0.00%) 83.46 ( 7.49%)
As before, massive reduction in external fragmentation events, some jitter
on latencies and an increase in THP allocation success rates.
2-socket Haswell machine
config-global-dhp__workload_thpfioscale XFS (no special madvise)
4 fio threads, 5 THP allocating threads
----------------------------------------------------------------
4.20-rc3 extfrag events < order 9: 215698
4.20-rc3+patch: 200210 (7% reduction)
4.20-rc3+patch1-4: 14263 (93% reduction)
4.20.0-rc3 4.20.0-rc3
lowzone-v5r8 boost-v5r8
Amean fault-base-5 1346.45 ( 0.00%) 1306.87 ( 2.94%)
Amean fault-huge-5 3418.60 ( 0.00%) 1348.94 ( 60.54%)
4.20.0-rc3 4.20.0-rc3
lowzone-v5r8 boost-v5r8
Percentage huge-5 0.78 ( 0.00%) 7.91 ( 910.64%)
There is a 93% reduction in fragmentation causing events, there is a big
reduction in the huge page fault latency and allocation success rate is
higher.
2-socket Haswell machine
global-dhp__workload_thpfioscale-madvhugepage-xfs (MADV_HUGEPAGE)
-----------------------------------------------------------------
4.20-rc3 extfrag events < order 9: 166352
4.20-rc3+patch: 147463 (11% reduction)
4.20-rc3+patch1-4: 11095 (93% reduction)
thpfioscale Fault Latencies
4.20.0-rc3 4.20.0-rc3
lowzone-v5r8 boost-v5r8
Amean fault-base-5 6217.43 ( 0.00%) 7419.67 * -19.34%*
Amean fault-huge-5 3163.33 ( 0.00%) 3263.80 ( -3.18%)
4.20.0-rc3 4.20.0-rc3
lowzone-v5r8 boost-v5r8
Percentage huge-5 95.14 ( 0.00%) 87.98 ( -7.53%)
There is a large reduction in fragmentation events with some jitter around
the latencies and success rates. As before, the high THP allocation
success rate does mean the system is under a lot of pressure. However, as
the fragmentation events are reduced, it would be expected that the
long-term allocation success rate would be higher.
Link: http://lkml.kernel.org/r/20181123114528.28802-5-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Zi Yan <zi.yan@cs.rutgers.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The i915 driver uses shmemfs to allocate backing storage for gem
objects. These shmemfs pages can be pinned (increased ref count) by
shmem_read_mapping_page_gfp(). When a lot of pages are pinned, vmscan
wastes a lot of time scanning these pinned pages. In some extreme case,
all pages in the inactive anon lru are pinned, and only the inactive
anon lru is scanned due to inactive_ratio, the system cannot swap and
invokes the oom-killer. Mark these pinned pages as unevictable to speed
up vmscan.
Export pagevec API check_move_unevictable_pages().
This patch was inspired by Chris Wilson's change [1].
[1]: https://patchwork.kernel.org/patch/9768741/
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Kuo-Hsin Yang <vovoy@chromium.org>
Acked-by: Michal Hocko <mhocko@suse.com> # mm part
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Dave Hansen <dave.hansen@intel.com>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20181106132324.17390-1-chris@chris-wilson.co.uk
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Pull XArray conversion from Matthew Wilcox:
"The XArray provides an improved interface to the radix tree data
structure, providing locking as part of the API, specifying GFP flags
at allocation time, eliminating preloading, less re-walking the tree,
more efficient iterations and not exposing RCU-protected pointers to
its users.
This patch set
1. Introduces the XArray implementation
2. Converts the pagecache to use it
3. Converts memremap to use it
The page cache is the most complex and important user of the radix
tree, so converting it was most important. Converting the memremap
code removes the only other user of the multiorder code, which allows
us to remove the radix tree code that supported it.
I have 40+ followup patches to convert many other users of the radix
tree over to the XArray, but I'd like to get this part in first. The
other conversions haven't been in linux-next and aren't suitable for
applying yet, but you can see them in the xarray-conv branch if you're
interested"
* 'xarray' of git://git.infradead.org/users/willy/linux-dax: (90 commits)
radix tree: Remove multiorder support
radix tree test: Convert multiorder tests to XArray
radix tree tests: Convert item_delete_rcu to XArray
radix tree tests: Convert item_kill_tree to XArray
radix tree tests: Move item_insert_order
radix tree test suite: Remove multiorder benchmarking
radix tree test suite: Remove __item_insert
memremap: Convert to XArray
xarray: Add range store functionality
xarray: Move multiorder_check to in-kernel tests
xarray: Move multiorder_shrink to kernel tests
xarray: Move multiorder account test in-kernel
radix tree test suite: Convert iteration test to XArray
radix tree test suite: Convert tag_tagged_items to XArray
radix tree: Remove radix_tree_clear_tags
radix tree: Remove radix_tree_maybe_preload_order
radix tree: Remove split/join code
radix tree: Remove radix_tree_update_node_t
page cache: Finish XArray conversion
dax: Convert page fault handlers to XArray
...
The page cache and most shrinkable slab caches hold data that has been
read from disk, but there are some caches that only cache CPU work, such
as the dentry and inode caches of procfs and sysfs, as well as the subset
of radix tree nodes that track non-resident page cache.
Currently, all these are shrunk at the same rate: using DEFAULT_SEEKS for
the shrinker's seeks setting tells the reclaim algorithm that for every
two page cache pages scanned it should scan one slab object.
This is a bogus setting. A virtual inode that required no IO to create is
not twice as valuable as a page cache page; shadow cache entries with
eviction distances beyond the size of memory aren't either.
In most cases, the behavior in practice is still fine. Such virtual
caches don't tend to grow and assert themselves aggressively, and usually
get picked up before they cause problems. But there are scenarios where
that's not true.
Our database workloads suffer from two of those. For one, their file
workingset is several times bigger than available memory, which has the
kernel aggressively create shadow page cache entries for the non-resident
parts of it. The workingset code does tell the VM that most of these are
expendable, but the VM ends up balancing them 2:1 to cache pages as per
the seeks setting. This is a huge waste of memory.
These workloads also deal with tens of thousands of open files and use
/proc for introspection, which ends up growing the proc_inode_cache to
absurdly large sizes - again at the cost of valuable cache space, which
isn't a reasonable trade-off, given that proc inodes can be re-created
without involving the disk.
This patch implements a "zero-seek" setting for shrinkers that results in
a target ratio of 0:1 between their objects and IO-backed caches. This
allows such virtual caches to grow when memory is available (they do
cache/avoid CPU work after all), but effectively disables them as soon as
IO-backed objects are under pressure.
It then switches the shrinkers for procfs and sysfs metadata, as well as
excess page cache shadow nodes, to the new zero-seek setting.
Link: http://lkml.kernel.org/r/20181009184732.762-5-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Domas Mituzas <dmituzas@fb.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Rik van Riel <riel@surriel.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When systems are overcommitted and resources become contended, it's hard
to tell exactly the impact this has on workload productivity, or how close
the system is to lockups and OOM kills. In particular, when machines work
multiple jobs concurrently, the impact of overcommit in terms of latency
and throughput on the individual job can be enormous.
In order to maximize hardware utilization without sacrificing individual
job health or risk complete machine lockups, this patch implements a way
to quantify resource pressure in the system.
A kernel built with CONFIG_PSI=y creates files in /proc/pressure/ that
expose the percentage of time the system is stalled on CPU, memory, or IO,
respectively. Stall states are aggregate versions of the per-task delay
accounting delays:
cpu: some tasks are runnable but not executing on a CPU
memory: tasks are reclaiming, or waiting for swapin or thrashing cache
io: tasks are waiting for io completions
These percentages of walltime can be thought of as pressure percentages,
and they give a general sense of system health and productivity loss
incurred by resource overcommit. They can also indicate when the system
is approaching lockup scenarios and OOMs.
To do this, psi keeps track of the task states associated with each CPU
and samples the time they spend in stall states. Every 2 seconds, the
samples are averaged across CPUs - weighted by the CPUs' non-idle time to
eliminate artifacts from unused CPUs - and translated into percentages of
walltime. A running average of those percentages is maintained over 10s,
1m, and 5m periods (similar to the loadaverage).
[hannes@cmpxchg.org: doc fixlet, per Randy]
Link: http://lkml.kernel.org/r/20180828205625.GA14030@cmpxchg.org
[hannes@cmpxchg.org: code optimization]
Link: http://lkml.kernel.org/r/20180907175015.GA8479@cmpxchg.org
[hannes@cmpxchg.org: rename psi_clock() to psi_update_work(), per Peter]
Link: http://lkml.kernel.org/r/20180907145404.GB11088@cmpxchg.org
[hannes@cmpxchg.org: fix build]
Link: http://lkml.kernel.org/r/20180913014222.GA2370@cmpxchg.org
Link: http://lkml.kernel.org/r/20180828172258.3185-9-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Daniel Drake <drake@endlessm.com>
Tested-by: Suren Baghdasaryan <surenb@google.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <jweiner@fb.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Enderborg <peter.enderborg@sony.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Cc: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Refaults happen during transitions between workingsets as well as in-place
thrashing. Knowing the difference between the two has a range of
applications, including measuring the impact of memory shortage on the
system performance, as well as the ability to smarter balance pressure
between the filesystem cache and the swap-backed workingset.
During workingset transitions, inactive cache refaults and pushes out
established active cache. When that active cache isn't stale, however,
and also ends up refaulting, that's bonafide thrashing.
Introduce a new page flag that tells on eviction whether the page has been
active or not in its lifetime. This bit is then stored in the shadow
entry, to classify refaults as transitioning or thrashing.
How many page->flags does this leave us with on 32-bit?
20 bits are always page flags
21 if you have an MMU
23 with the zone bits for DMA, Normal, HighMem, Movable
29 with the sparsemem section bits
30 if PAE is enabled
31 with this patch.
So on 32-bit PAE, that leaves 1 bit for distinguishing two NUMA nodes. If
that's not enough, the system can switch to discontigmem and re-gain the 6
or 7 sparsemem section bits.
Link: http://lkml.kernel.org/r/20180828172258.3185-3-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Daniel Drake <drake@endlessm.com>
Tested-by: Suren Baghdasaryan <surenb@google.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Johannes Weiner <jweiner@fb.com>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Enderborg <peter.enderborg@sony.com>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vinayak Menon <vinmenon@codeaurora.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
I've noticed, that dying memory cgroups are often pinned in memory by a
single pagecache page. Even under moderate memory pressure they sometimes
stayed in such state for a long time. That looked strange.
My investigation showed that the problem is caused by applying the LRU
pressure balancing math:
scan = div64_u64(scan * fraction[lru], denominator),
where
denominator = fraction[anon] + fraction[file] + 1.
Because fraction[lru] is always less than denominator, if the initial scan
size is 1, the result is always 0.
This means the last page is not scanned and has
no chances to be reclaimed.
Fix this by rounding up the result of the division.
In practice this change significantly improves the speed of dying cgroups
reclaim.
[guro@fb.com: prevent double calculation of DIV64_U64_ROUND_UP() arguments]
Link: http://lkml.kernel.org/r/20180829213311.GA13501@castle
Link: http://lkml.kernel.org/r/20180827162621.30187-3-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Both callers of __delete_from_swap_cache have the swp_entry_t already,
so pass that in to make constructing the XA_STATE easier.
Signed-off-by: Matthew Wilcox <willy@infradead.org>
do_shrink_slab() returns unsigned long value, and the placing into int
variable cuts high bytes off. Then we compare ret and 0xfffffffe (since
SHRINK_EMPTY is converted to ret type).
Thus a large number of objects returned by do_shrink_slab() may be
interpreted as SHRINK_EMPTY, if low bytes of their value are equal to
0xfffffffe. Fix that by declaration ret as unsigned long in these
functions.
Link: http://lkml.kernel.org/r/153813407177.17544.14888305435570723973.stgit@localhost.localdomain
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Reported-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Shakeel Butt <shakeelb@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
9092c71bb7 ("mm: use sc->priority for slab shrink targets") changed the
way that the target slab pressure is calculated and made it
priority-based:
delta = freeable >> priority;
delta *= 4;
do_div(delta, shrinker->seeks);
The problem is that on a default priority (which is 12) no pressure is
applied at all, if the number of potentially reclaimable objects is less
than 4096 (1<<12).
This causes the last objects on slab caches of no longer used cgroups to
(almost) never get reclaimed. It's obviously a waste of memory.
It can be especially painful, if these stale objects are holding a
reference to a dying cgroup. Slab LRU lists are reparented on memcg
offlining, but corresponding objects are still holding a reference to the
dying cgroup. If we don't scan these objects, the dying cgroup can't go
away. Most likely, the parent cgroup hasn't any directly charged objects,
only remaining objects from dying children cgroups. So it can easily hold
a reference to hundreds of dying cgroups.
If there are no big spikes in memory pressure, and new memory cgroups are
created and destroyed periodically, this causes the number of dying
cgroups grow steadily, causing a slow-ish and hard-to-detect memory
"leak". It's not a real leak, as the memory can be eventually reclaimed,
but it could not happen in a real life at all. I've seen hosts with a
steadily climbing number of dying cgroups, which doesn't show any signs of
a decline in months, despite the host is loaded with a production
workload.
It is an obvious waste of memory, and to prevent it, let's apply a minimal
pressure even on small shrinker lists. E.g. if there are freeable
objects, let's scan at least min(freeable, scan_batch) objects.
This fix significantly improves a chance of a dying cgroup to be
reclaimed, and together with some previous patches stops the steady growth
of the dying cgroups number on some of our hosts.
Link: http://lkml.kernel.org/r/20180905230759.12236-1-guro@fb.com
Fixes: 9092c71bb7 ("mm: use sc->priority for slab shrink targets")
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Rik van Riel <riel@surriel.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
page_freeze_refs/page_unfreeze_refs have already been relplaced by
page_ref_freeze/page_ref_unfreeze , but they are not modified in the
comments.
Link: http://lkml.kernel.org/r/1532590226-106038-1-git-send-email-jiang.biao2@zte.com.cn
Signed-off-by: Jiang Biao <jiang.biao2@zte.com.cn>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is a sad BUG introduced in patch adding SHRINKER_REGISTERING.
shrinker_idr business is only for memcg-aware shrinkers. Only such type
of shrinkers have id and they must be finaly installed via idr_replace()
in this function. For !memcg-aware shrinkers we never initialize
shrinker->id field.
But there are all types of shrinkers passed to idr_replace(), and every
!memcg-aware shrinker with random ID (most probably, its id is 0)
replaces memcg-aware shrinker pointed by the ID in IDR.
This patch fixes the problem.
Link: http://lkml.kernel.org/r/8ff8a793-8211-713a-4ed9-d6e52390c2fc@virtuozzo.com
Fixes: 7e010df53c "mm: use special value SHRINKER_REGISTERING instead of list_empty() check"
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Reported-by: <syzbot+d5f648a1bfe15678786b@syzkaller.appspotmail.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: <syzkaller-bugs@googlegroups.com>
Cc: Huang Ying <ying.huang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The patch introduces a special value SHRINKER_REGISTERING to use instead
of list_empty() to differ a registering shrinker from unregistered
shrinker. Why we need that at all?
Shrinker registration is split in two parts. The first one is
prealloc_shrinker(), which allocates shrinker memory and reserves ID in
shrinker_idr. This function can fail. The second is
register_shrinker_prepared(), and it finalizes the registration. This
function actually makes shrinker available to be used from
shrink_slab(), and it can't fail.
One shrinker may be based on more then one LRU lists. So, we never
clear the bit in memcg shrinker maps, when (one of) corresponding LRU
list becomes empty, since other LRU lists may be not empty. See
superblock shrinker for example: it is based on two LRU lists:
s_inode_lru and s_dentry_lru. We do not want to clear shrinker bit,
when there are no inodes in s_inode_lru, as s_dentry_lru may contain
dentries.
Instead of that, we use special algorithm to detect shrinkers having no
elements at all its LRU lists, and this is made in shrink_slab_memcg().
See the comment in this function for the details.
Also, in shrink_slab_memcg() we clear shrinker bit in the map, when we
meet unregistered shrinker (bit is set, while there is no a shrinker in
IDR). Otherwise, we would have done that at the moment of shrinker
unregistration for all memcgs (and this looks worse, since iteration
over all memcg may take much time). Also this would have imposed
restrictions on shrinker unregistration order for its users: they would
have had to guarantee, there are no new elements after
unregister_shrinker() (otherwise, a new added element would have set a
bit).
So, if we meet a set bit in map and no shrinker in IDR when we're
iterating over the map in shrink_slab_memcg(), this means the
corresponding shrinker is unregistered, and we must clear the bit.
Another case is shrinker registration. We want two things there:
1) do_shrink_slab() can be called only for completely registered
shrinkers;
2) shrinker internal lists may be populated in any order with
register_shrinker_prepared() (let's talk on the example with sb). Both
of:
a)list_lru_add(&inode->i_sb->s_inode_lru, &inode->i_lru); [cpu0]
memcg_set_shrinker_bit(); [cpu0]
...
register_shrinker_prepared(); [cpu1]
and
b)register_shrinker_prepared(); [cpu0]
...
list_lru_add(&inode->i_sb->s_inode_lru, &inode->i_lru); [cpu1]
memcg_set_shrinker_bit(); [cpu1]
are legitimate. We don't want to impose restriction here and to
force people to use only (b) variant. We don't want to force people to
care, there is no elements in LRU lists before the shrinker is
completely registered. Internal users of LRU lists and shrinker code
are two different subsystems, and they have to be closed in themselves
each other.
In (a) case we have the bit set before shrinker is completely
registered. We don't want do_shrink_slab() is called at this moment, so
we have to detect such the registering shrinkers.
Before this patch list_empty() (shrinker is not linked to the list)
check was used for that. So, in (a) there could be a bit set, but we
don't call do_shrink_slab() unless shrinker is linked to the list. It's
just an indicator, I just overloaded linking to the list.
This was not the best solution, since it's better not to touch the
shrinker memory from shrink_slab_memcg() before it's completely
registered (this also will be useful in the future to make shrink_slab()
completely lockless).
So, this patch introduces better way to detect registering shrinker,
which allows not to dereference shrinker memory. It's just a ~0UL
value, which we insert into the IDR during ID allocation. After
shrinker is ready to be used, we insert actual shrinker pointer in the
IDR, and it becomes available to shrink_slab_memcg().
We can't use NULL instead of this new value for this purpose as:
shrink_slab_memcg() already uses NULL to detect unregistered shrinkers,
and we don't want the function sees NULL and clears the bit, otherwise
(a) won't work.
This is the only thing the patch makes: the better way to detect
registering shrinker. Nothing else this patch makes.
Also this gives a better assembler, but it's minor side of the patch:
Before:
callq <idr_find>
mov %rax,%r15
test %rax,%rax
je <shrink_slab_memcg+0x1d5>
mov 0x20(%rax),%rax
lea 0x20(%r15),%rdx
cmp %rax,%rdx
je <shrink_slab_memcg+0xbd>
mov 0x8(%rsp),%edx
mov %r15,%rsi
lea 0x10(%rsp),%rdi
callq <do_shrink_slab>
After:
callq <idr_find>
mov %rax,%r15
lea -0x1(%rax),%rax
cmp $0xfffffffffffffffd,%rax
ja <shrink_slab_memcg+0x1cd>
mov 0x8(%rsp),%edx
mov %r15,%rsi
lea 0x10(%rsp),%rdi
callq ffffffff810cefd0 <do_shrink_slab>
[ktkhai@virtuozzo.com: add #ifdef CONFIG_MEMCG_KMEM around idr_replace()]
Link: http://lkml.kernel.org/r/758b8fec-7573-47eb-b26a-7b2847ae7b8c@virtuozzo.com
Link: http://lkml.kernel.org/r/153355467546.11522.4518015068123480218.stgit@localhost.localdomain
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Josef Bacik <jbacik@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In case of shrink_slab_memcg() we do not zero nid, when shrinker is not
numa-aware. This is not a real problem, since currently all memcg-aware
shrinkers are numa-aware too (we have two: super_block shrinker and
workingset shrinker), but something may change in the future.
Link: http://lkml.kernel.org/r/153320759911.18959.8842396230157677671.stgit@localhost.localdomain
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Josef Bacik <jbacik@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To avoid further unneed calls of do_shrink_slab() for shrinkers, which
already do not have any charged objects in a memcg, their bits have to
be cleared.
This patch introduces a lockless mechanism to do that without races
without parallel list lru add. After do_shrink_slab() returns
SHRINK_EMPTY the first time, we clear the bit and call it once again.
Then we restore the bit, if the new return value is different.
Note, that single smp_mb__after_atomic() in shrink_slab_memcg() covers
two situations:
1)list_lru_add() shrink_slab_memcg
list_add_tail() for_each_set_bit() <--- read bit
do_shrink_slab() <--- missed list update (no barrier)
<MB> <MB>
set_bit() do_shrink_slab() <--- seen list update
This situation, when the first do_shrink_slab() sees set bit, but it
doesn't see list update (i.e., race with the first element queueing), is
rare. So we don't add <MB> before the first call of do_shrink_slab()
instead of this to do not slow down generic case. Also, it's need the
second call as seen in below in (2).
2)list_lru_add() shrink_slab_memcg()
list_add_tail() ...
set_bit() ...
... for_each_set_bit()
do_shrink_slab() do_shrink_slab()
clear_bit() ...
... ...
list_lru_add() ...
list_add_tail() clear_bit()
<MB> <MB>
set_bit() do_shrink_slab()
The barriers guarantee that the second do_shrink_slab() in the right
side task sees list update if really cleared the bit. This case is
drawn in the code comment.
[Results/performance of the patchset]
After the whole patchset applied the below test shows signify increase
of performance:
$echo 1 > /sys/fs/cgroup/memory/memory.use_hierarchy
$mkdir /sys/fs/cgroup/memory/ct
$echo 4000M > /sys/fs/cgroup/memory/ct/memory.kmem.limit_in_bytes
$for i in `seq 0 4000`; do mkdir /sys/fs/cgroup/memory/ct/$i;
echo $$ > /sys/fs/cgroup/memory/ct/$i/cgroup.procs;
mkdir -p s/$i; mount -t tmpfs $i s/$i;
touch s/$i/file; done
Then, 5 sequential calls of drop caches:
$time echo 3 > /proc/sys/vm/drop_caches
1)Before:
0.00user 13.78system 0:13.78elapsed 99%CPU
0.00user 5.59system 0:05.60elapsed 99%CPU
0.00user 5.48system 0:05.48elapsed 99%CPU
0.00user 8.35system 0:08.35elapsed 99%CPU
0.00user 8.34system 0:08.35elapsed 99%CPU
2)After
0.00user 1.10system 0:01.10elapsed 99%CPU
0.00user 0.00system 0:00.01elapsed 64%CPU
0.00user 0.01system 0:00.01elapsed 82%CPU
0.00user 0.00system 0:00.01elapsed 64%CPU
0.00user 0.01system 0:00.01elapsed 82%CPU
The results show the performance increases at least in 548 times.
Shakeel Butt tested this patchset with fork-bomb on his configuration:
> I created 255 memcgs, 255 ext4 mounts and made each memcg create a
> file containing few KiBs on corresponding mount. Then in a separate
> memcg of 200 MiB limit ran a fork-bomb.
>
> I ran the "perf record -ag -- sleep 60" and below are the results:
>
> Without the patch series:
> Samples: 4M of event 'cycles', Event count (approx.): 3279403076005
> + 36.40% fb.sh [kernel.kallsyms] [k] shrink_slab
> + 18.97% fb.sh [kernel.kallsyms] [k] list_lru_count_one
> + 6.75% fb.sh [kernel.kallsyms] [k] super_cache_count
> + 0.49% fb.sh [kernel.kallsyms] [k] down_read_trylock
> + 0.44% fb.sh [kernel.kallsyms] [k] mem_cgroup_iter
> + 0.27% fb.sh [kernel.kallsyms] [k] up_read
> + 0.21% fb.sh [kernel.kallsyms] [k] osq_lock
> + 0.13% fb.sh [kernel.kallsyms] [k] shmem_unused_huge_count
> + 0.08% fb.sh [kernel.kallsyms] [k] shrink_node_memcg
> + 0.08% fb.sh [kernel.kallsyms] [k] shrink_node
>
> With the patch series:
> Samples: 4M of event 'cycles', Event count (approx.): 2756866824946
> + 47.49% fb.sh [kernel.kallsyms] [k] down_read_trylock
> + 30.72% fb.sh [kernel.kallsyms] [k] up_read
> + 9.51% fb.sh [kernel.kallsyms] [k] mem_cgroup_iter
> + 1.69% fb.sh [kernel.kallsyms] [k] shrink_node_memcg
> + 1.35% fb.sh [kernel.kallsyms] [k] mem_cgroup_protected
> + 1.05% fb.sh [kernel.kallsyms] [k] queued_spin_lock_slowpath
> + 0.85% fb.sh [kernel.kallsyms] [k] _raw_spin_lock
> + 0.78% fb.sh [kernel.kallsyms] [k] lruvec_lru_size
> + 0.57% fb.sh [kernel.kallsyms] [k] shrink_node
> + 0.54% fb.sh [kernel.kallsyms] [k] queue_work_on
> + 0.46% fb.sh [kernel.kallsyms] [k] shrink_slab_memcg
[ktkhai@virtuozzo.com: v9]
Link: http://lkml.kernel.org/r/153112561772.4097.11011071937553113003.stgit@localhost.localdomain
Link: http://lkml.kernel.org/r/153063070859.1818.11870882950920963480.stgit@localhost.localdomain
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Tested-by: Shakeel Butt <shakeelb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Li RongQing <lirongqing@baidu.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Sahitya Tummala <stummala@codeaurora.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We need to distinguish the situations when shrinker has very small
amount of objects (see vfs_pressure_ratio() called from
super_cache_count()), and when it has no objects at all. Currently, in
the both of these cases, shrinker::count_objects() returns 0.
The patch introduces new SHRINK_EMPTY return value, which will be used
for "no objects at all" case. It's is a refactoring mostly, as
SHRINK_EMPTY is replaced by 0 by all callers of do_shrink_slab() in this
patch, and all the magic will happen in further.
Link: http://lkml.kernel.org/r/153063069574.1818.11037751256699341813.stgit@localhost.localdomain
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Tested-by: Shakeel Butt <shakeelb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Li RongQing <lirongqing@baidu.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Sahitya Tummala <stummala@codeaurora.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The patch makes shrink_slab() be called for root_mem_cgroup in the same
way as it's called for the rest of cgroups. This simplifies the logic
and improves the readability.
[ktkhai@virtuozzo.com: wrote changelog]
Link: http://lkml.kernel.org/r/153063068338.1818.11496084754797453962.stgit@localhost.localdomain
Signed-off-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Tested-by: Shakeel Butt <shakeelb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Li RongQing <lirongqing@baidu.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Sahitya Tummala <stummala@codeaurora.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Using the preparations made in previous patches, in case of memcg
shrink, we may avoid shrinkers, which are not set in memcg's shrinkers
bitmap. To do that, we separate iterations over memcg-aware and
!memcg-aware shrinkers, and memcg-aware shrinkers are chosen via
for_each_set_bit() from the bitmap. In case of big nodes, having many
isolated environments, this gives significant performance growth. See
next patches for the details.
Note that the patch does not respect to empty memcg shrinkers, since we
never clear the bitmap bits after we set it once. Their shrinkers will
be called again, with no shrinked objects as result. This functionality
is provided by next patches.
[ktkhai@virtuozzo.com: v9]
Link: http://lkml.kernel.org/r/153112558507.4097.12713813335683345488.stgit@localhost.localdomain
Link: http://lkml.kernel.org/r/153063066653.1818.976035462801487910.stgit@localhost.localdomain
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Tested-by: Shakeel Butt <shakeelb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Li RongQing <lirongqing@baidu.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Sahitya Tummala <stummala@codeaurora.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Imagine a big node with many cpus, memory cgroups and containers. Let
we have 200 containers, every container has 10 mounts, and 10 cgroups.
All container tasks don't touch foreign containers mounts. If there is
intensive pages write, and global reclaim happens, a writing task has to
iterate over all memcgs to shrink slab, before it's able to go to
shrink_page_list().
Iteration over all the memcg slabs is very expensive: the task has to
visit 200 * 10 = 2000 shrinkers for every memcg, and since there are
2000 memcgs, the total calls are 2000 * 2000 = 4000000.
So, the shrinker makes 4 million do_shrink_slab() calls just to try to
isolate SWAP_CLUSTER_MAX pages in one of the actively writing memcg via
shrink_page_list(). I've observed a node spending almost 100% in
kernel, making useless iteration over already shrinked slab.
This patch adds bitmap of memcg-aware shrinkers to memcg. The size of
the bitmap depends on bitmap_nr_ids, and during memcg life it's
maintained to be enough to fit bitmap_nr_ids shrinkers. Every bit in
the map is related to corresponding shrinker id.
Next patches will maintain set bit only for really charged memcg. This
will allow shrink_slab() to increase its performance in significant way.
See the last patch for the numbers.
[ktkhai@virtuozzo.com: v9]
Link: http://lkml.kernel.org/r/153112549031.4097.3576147070498769979.stgit@localhost.localdomain
[ktkhai@virtuozzo.com: add comment to mem_cgroup_css_online()]
Link: http://lkml.kernel.org/r/521f9e5f-c436-b388-fe83-4dc870bfb489@virtuozzo.com
Link: http://lkml.kernel.org/r/153063056619.1818.12550500883688681076.stgit@localhost.localdomain
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Tested-by: Shakeel Butt <shakeelb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Li RongQing <lirongqing@baidu.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Sahitya Tummala <stummala@codeaurora.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Introduce shrinker::id number, which is used to enumerate memcg-aware
shrinkers. The number start from 0, and the code tries to maintain it
as small as possible.
This will be used to represent a memcg-aware shrinkers in memcg
shrinkers map.
Since all memcg-aware shrinkers are based on list_lru, which is
per-memcg in case of !CONFIG_MEMCG_KMEM only, the new functionality will
be under this config option.
[ktkhai@virtuozzo.com: v9]
Link: http://lkml.kernel.org/r/153112546435.4097.10607140323811756557.stgit@localhost.localdomain
Link: http://lkml.kernel.org/r/153063054586.1818.6041047871606697364.stgit@localhost.localdomain
Signed-off-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Tested-by: Shakeel Butt <shakeelb@google.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Li RongQing <lirongqing@baidu.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matthias Kaehlcke <mka@chromium.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Sahitya Tummala <stummala@codeaurora.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Waiman Long <longman@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use smaller scan_control fields for order, priority, and reclaim_idx.
Convert fields from int => s8. All easily fit within a byte:
- allocation order range: 0..MAX_ORDER(64?)
- priority range: 0..12(DEF_PRIORITY)
- reclaim_idx range: 0..6(__MAX_NR_ZONES)
Since 6538b8ea88 ("x86_64: expand kernel stack to 16K") x86_64 stack
overflows are not an issue. But it's inefficient to use ints.
Use s8 (signed byte) rather than u8 to allow for loops like:
do {
...
} while (--sc.priority >= 0);
Add BUILD_BUG_ON to verify that s8 is capable of storing max values.
This reduces sizeof(struct scan_control):
- 96 => 80 bytes (x86_64)
- 68 => 56 bytes (i386)
scan_control structure field order is changed to utilize padding. After
this patch there is 1 bit of scan_control padding.
akpm: makes my vmscan.o's .text 572 bytes smaller as well.
Link: http://lkml.kernel.org/r/20180530061212.84915-1-gthelen@google.com
Signed-off-by: Greg Thelen <gthelen@google.com>
Suggested-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Memory controller implements the memory.low best-effort memory
protection mechanism, which works perfectly in many cases and allows
protecting working sets of important workloads from sudden reclaim.
But its semantics has a significant limitation: it works only as long as
there is a supply of reclaimable memory. This makes it pretty useless
against any sort of slow memory leaks or memory usage increases. This
is especially true for swapless systems. If swap is enabled, memory
soft protection effectively postpones problems, allowing a leaking
application to fill all swap area, which makes no sense. The only
effective way to guarantee the memory protection in this case is to
invoke the OOM killer.
It's possible to handle this case in userspace by reacting on MEMCG_LOW
events; but there is still a place for a fail-safe in-kernel mechanism
to provide stronger guarantees.
This patch introduces the memory.min interface for cgroup v2 memory
controller. It works very similarly to memory.low (sharing the same
hierarchical behavior), except that it's not disabled if there is no
more reclaimable memory in the system.
If cgroup is not populated, its memory.min is ignored, because otherwise
even the OOM killer wouldn't be able to reclaim the protected memory,
and the system can stall.
[guro@fb.com: s/low/min/ in docs]
Link: http://lkml.kernel.org/r/20180510130758.GA9129@castle.DHCP.thefacebook.com
Link: http://lkml.kernel.org/r/20180509180734.GA4856@castle.DHCP.thefacebook.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Reviewed-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
While revisiting my Btrfs swapfile series [1], I introduced a situation
in which reclaim would lock i_rwsem, and even though the swapon() path
clearly made GFP_KERNEL allocations while holding i_rwsem, I got no
complaints from lockdep. It turns out that the rework of the fs_reclaim
annotation was broken: if the current task has PF_MEMALLOC set, we don't
acquire the dummy fs_reclaim lock, but when reclaiming we always check
this _after_ we've just set the PF_MEMALLOC flag. In most cases, we can
fix this by moving the fs_reclaim_{acquire,release}() outside of the
memalloc_noreclaim_{save,restore}(), althought kswapd is slightly
different. After applying this, I got the expected lockdep splats.
1: https://lwn.net/Articles/625412/
Link: http://lkml.kernel.org/r/9f8aa70652a98e98d7c4de0fc96a4addcee13efe.1523778026.git.osandov@fb.com
Fixes: d92a8cfcb3 ("locking/lockdep: Rework FS_RECLAIM annotation")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
George Boole would have noticed a slight error in 4.16 commit
69d763fc6d ("mm: pin address_space before dereferencing it while
isolating an LRU page"). Fix it, to match both the comment above it,
and the original behaviour.
Although anonymous pages are not marked PageDirty at first, we have an
old habit of calling SetPageDirty when a page is removed from swap
cache: so there's a category of ex-swap pages that are easily
migratable, but were inadvertently excluded from compaction's async
migration in 4.16.
Link: http://lkml.kernel.org/r/alpine.LSU.2.11.1805302014001.12558@eggly.anvils
Fixes: 69d763fc6d ("mm: pin address_space before dereferencing it while isolating an LRU page")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Ivan Kalvachev <ikalvachev@gmail.com>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
syzbot is catching so many bugs triggered by commit 9ee332d99e
("sget(): handle failures of register_shrinker()"). That commit expected
that calling kill_sb() from deactivate_locked_super() without successful
fill_super() is safe, but the reality was different; some callers assign
attributes which are needed for kill_sb() after sget() succeeds.
For example, [1] is a report where sb->s_mode (which seems to be either
FMODE_READ | FMODE_EXCL | FMODE_WRITE or FMODE_READ | FMODE_EXCL) is not
assigned unless sget() succeeds. But it does not worth complicate sget()
so that register_shrinker() failure path can safely call
kill_block_super() via kill_sb(). Making alloc_super() fail if memory
allocation for register_shrinker() failed is much simpler. Let's avoid
calling deactivate_locked_super() from sget_userns() by preallocating
memory for the shrinker and making register_shrinker() in sget_userns()
never fail.
[1] https://syzkaller.appspot.com/bug?id=588996a25a2587be2e3a54e8646728fb9cae44e7
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reported-by: syzbot <syzbot+5a170e19c963a2e0df79@syzkaller.appspotmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Remove the address_space ->tree_lock and use the xa_lock newly added to
the radix_tree_root. Rename the address_space ->page_tree to ->i_pages,
since we don't really care that it's a tree.
[willy@infradead.org: fix nds32, fs/dax.c]
Link: http://lkml.kernel.org/r/20180406145415.GB20605@bombadil.infradead.orgLink: http://lkml.kernel.org/r/20180313132639.17387-9-willy@infradead.org
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit a983b5ebee ("mm: memcontrol: fix excessive complexity in
memory.stat reporting") added per-cpu drift to all memory cgroup stats
and events shown in memory.stat and memory.events.
For memory.stat this is acceptable. But memory.events issues file
notifications, and somebody polling the file for changes will be
confused when the counters in it are unchanged after a wakeup.
Luckily, the events in memory.events - MEMCG_LOW, MEMCG_HIGH, MEMCG_MAX,
MEMCG_OOM - are sufficiently rare and high-level that we don't need
per-cpu buffering for them: MEMCG_HIGH and MEMCG_MAX would be the most
frequent, but they're counting invocations of reclaim, which is a
complex operation that touches many shared cachelines.
This splits memory.events from the generic VM events and tracks them in
their own, unbuffered atomic counters. That's also cleaner, as it
eliminates the ugly enum nesting of VM and cgroup events.
[hannes@cmpxchg.org: "array subscript is above array bounds"]
Link: http://lkml.kernel.org/r/20180406155441.GA20806@cmpxchg.org
Link: http://lkml.kernel.org/r/20180405175507.GA24817@cmpxchg.org
Fixes: a983b5ebee ("mm: memcontrol: fix excessive complexity in memory.stat reporting")
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Tejun Heo <tj@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Roman Gushchin <guro@fb.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
memcg reclaim may alter pgdat->flags based on the state of LRU lists in
cgroup and its children. PGDAT_WRITEBACK may force kswapd to sleep
congested_wait(), PGDAT_DIRTY may force kswapd to writeback filesystem
pages. But the worst here is PGDAT_CONGESTED, since it may force all
direct reclaims to stall in wait_iff_congested(). Note that only kswapd
have powers to clear any of these bits. This might just never happen if
cgroup limits configured that way. So all direct reclaims will stall as
long as we have some congested bdi in the system.
Leave all pgdat->flags manipulations to kswapd. kswapd scans the whole
pgdat, only kswapd can clear pgdat->flags once node is balanced, thus
it's reasonable to leave all decisions about node state to kswapd.
Why only kswapd? Why not allow to global direct reclaim change these
flags? It is because currently only kswapd can clear these flags. I'm
less worried about the case when PGDAT_CONGESTED falsely not set, and
more worried about the case when it falsely set. If direct reclaimer
sets PGDAT_CONGESTED, do we have guarantee that after the congestion
problem is sorted out, kswapd will be woken up and clear the flag? It
seems like there is no such guarantee. E.g. direct reclaimers may
eventually balance pgdat and kswapd simply won't wake up (see
wakeup_kswapd()).
Moving pgdat->flags manipulation to kswapd, means that cgroup2 recalim
now loses its congestion throttling mechanism. Add per-cgroup
congestion state and throttle cgroup2 reclaimers if memcg is in
congestion state.
Currently there is no need in per-cgroup PGDAT_WRITEBACK and PGDAT_DIRTY
bits since they alter only kswapd behavior.
The problem could be easily demonstrated by creating heavy congestion in
one cgroup:
echo "+memory" > /sys/fs/cgroup/cgroup.subtree_control
mkdir -p /sys/fs/cgroup/congester
echo 512M > /sys/fs/cgroup/congester/memory.max
echo $$ > /sys/fs/cgroup/congester/cgroup.procs
/* generate a lot of diry data on slow HDD */
while true; do dd if=/dev/zero of=/mnt/sdb/zeroes bs=1M count=1024; done &
....
while true; do dd if=/dev/zero of=/mnt/sdb/zeroes bs=1M count=1024; done &
and some job in another cgroup:
mkdir /sys/fs/cgroup/victim
echo 128M > /sys/fs/cgroup/victim/memory.max
# time cat /dev/sda > /dev/null
real 10m15.054s
user 0m0.487s
sys 1m8.505s
According to the tracepoint in wait_iff_congested(), the 'cat' spent 50%
of the time sleeping there.
With the patch, cat don't waste time anymore:
# time cat /dev/sda > /dev/null
real 5m32.911s
user 0m0.411s
sys 0m56.664s
[aryabinin@virtuozzo.com: congestion state should be per-node]
Link: http://lkml.kernel.org/r/20180406135215.10057-1-aryabinin@virtuozzo.com
[ayabinin@virtuozzo.com: make congestion state per-cgroup-per-node instead of just per-cgroup[
Link: http://lkml.kernel.org/r/20180406180254.8970-2-aryabinin@virtuozzo.com
Link: http://lkml.kernel.org/r/20180323152029.11084-5-aryabinin@virtuozzo.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We have separate LRU list for each memory cgroup. Memory reclaim
iterates over cgroups and calls shrink_inactive_list() every inactive
LRU list. Based on the state of a single LRU shrink_inactive_list() may
flag the whole node as dirty,congested or under writeback. This is
obviously wrong and hurtful. It's especially hurtful when we have
possibly small congested cgroup in system. Than *all* direct reclaims
waste time by sleeping in wait_iff_congested(). And the more memcgs in
the system we have the longer memory allocation stall is, because
wait_iff_congested() called on each lru-list scan.
Sum reclaim stats across all visited LRUs on node and flag node as
dirty, congested or under writeback based on that sum. Also call
congestion_wait(), wait_iff_congested() once per pgdat scan, instead of
once per lru-list scan.
This only fixes the problem for global reclaim case. Per-cgroup reclaim
may alter global pgdat flags too, which is wrong. But that is separate
issue and will be addressed in the next patch.
This change will not have any effect on a systems with all workload
concentrated in a single cgroup.
[aryabinin@virtuozzo.com: check nr_writeback against all nr_taken, not just file]
Link: http://lkml.kernel.org/r/20180406180254.8970-1-aryabinin@virtuozzo.com
Link: http://lkml.kernel.org/r/20180323152029.11084-4-aryabinin@virtuozzo.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Only kswapd can have non-zero nr_immediate, and current_may_throttle()
is always true for kswapd (PF_LESS_THROTTLE bit is never set) thus it's
enough to check stat.nr_immediate only.
Link: http://lkml.kernel.org/r/20180315164553.17856-4-aryabinin@virtuozzo.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Update some comments that became stale since transiton from per-zone to
per-node reclaim.
Link: http://lkml.kernel.org/r/20180315164553.17856-2-aryabinin@virtuozzo.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Shakeel Butt <shakeelb@google.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Kswapd will not wakeup if per-zone watermarks are not failing or if too
many previous attempts at background reclaim have failed.
This can be true if there is a lot of free memory available. For high-
order allocations, kswapd is responsible for waking up kcompactd for
background compaction. If the zone is not below its watermarks or
reclaim has recently failed (lots of free memory, nothing left to
reclaim), kcompactd does not get woken up.
When __GFP_DIRECT_RECLAIM is not allowed, allow kcompactd to still be
woken up even if kswapd will not reclaim. This allows high-order
allocations, such as thp, to still trigger background compaction even
when the zone has an abundance of free memory.
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1803111659420.209721@chino.kir.corp.google.com
Signed-off-by: David Rientjes <rientjes@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since we no longer use return value of shrink_slab() for normal reclaim,
the comment is no longer true. If some do_shrink_slab() call takes
unexpectedly long (root cause of stall is currently unknown) when
register_shrinker()/unregister_shrinker() is pending, trying to drop
caches via /proc/sys/vm/drop_caches could become infinite cond_resched()
loop if many mem_cgroup are defined. For safety, let's not pretend
forward progress.
Link: http://lkml.kernel.org/r/201802202229.GGF26507.LVFtMSOOHFJOQF@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Dave Chinner <dchinner@redhat.com>
Cc: Glauber Costa <glommer@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When page_mapping() is called and the mapping is dereferenced in
page_evicatable() through shrink_active_list(), it is possible for the
inode to be truncated and the embedded address space to be freed at the
same time. This may lead to the following race.
CPU1 CPU2
truncate(inode) shrink_active_list()
... page_evictable(page)
truncate_inode_page(mapping, page);
delete_from_page_cache(page)
spin_lock_irqsave(&mapping->tree_lock, flags);
__delete_from_page_cache(page, NULL)
page_cache_tree_delete(..)
... mapping = page_mapping(page);
page->mapping = NULL;
...
spin_unlock_irqrestore(&mapping->tree_lock, flags);
page_cache_free_page(mapping, page)
put_page(page)
if (put_page_testzero(page)) -> false
- inode now has no pages and can be freed including embedded address_space
mapping_unevictable(mapping)
test_bit(AS_UNEVICTABLE, &mapping->flags);
- we've dereferenced mapping which is potentially already free.
Similar race exists between swap cache freeing and page_evicatable()
too.
The address_space in inode and swap cache will be freed after a RCU
grace period. So the races are fixed via enclosing the page_mapping()
and address_space usage in rcu_read_lock/unlock(). Some comments are
added in code to make it clear what is protected by the RCU read lock.
Link: http://lkml.kernel.org/r/20180212081227.1940-1-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Minchan Kim <minchan@kernel.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 726d061fbd ("mm: vmscan: kick flushers when we encounter dirty
pages on the LRU") added flusher invocation to shrink_inactive_list()
when many dirty pages on the LRU are encountered.
However, shrink_inactive_list() doesn't wake up flushers for legacy
cgroup reclaim, so the next commit bbef938429 ("mm: vmscan: remove old
flusher wakeup from direct reclaim path") removed the only source of
flusher's wake up in legacy mem cgroup reclaim path.
This leads to premature OOM if there is too many dirty pages in cgroup:
# mkdir /sys/fs/cgroup/memory/test
# echo $$ > /sys/fs/cgroup/memory/test/tasks
# echo 50M > /sys/fs/cgroup/memory/test/memory.limit_in_bytes
# dd if=/dev/zero of=tmp_file bs=1M count=100
Killed
dd invoked oom-killer: gfp_mask=0x14000c0(GFP_KERNEL), nodemask=(null), order=0, oom_score_adj=0
Call Trace:
dump_stack+0x46/0x65
dump_header+0x6b/0x2ac
oom_kill_process+0x21c/0x4a0
out_of_memory+0x2a5/0x4b0
mem_cgroup_out_of_memory+0x3b/0x60
mem_cgroup_oom_synchronize+0x2ed/0x330
pagefault_out_of_memory+0x24/0x54
__do_page_fault+0x521/0x540
page_fault+0x45/0x50
Task in /test killed as a result of limit of /test
memory: usage 51200kB, limit 51200kB, failcnt 73
memory+swap: usage 51200kB, limit 9007199254740988kB, failcnt 0
kmem: usage 296kB, limit 9007199254740988kB, failcnt 0
Memory cgroup stats for /test: cache:49632KB rss:1056KB rss_huge:0KB shmem:0KB
mapped_file:0KB dirty:49500KB writeback:0KB swap:0KB inactive_anon:0KB
active_anon:1168KB inactive_file:24760KB active_file:24960KB unevictable:0KB
Memory cgroup out of memory: Kill process 3861 (bash) score 88 or sacrifice child
Killed process 3876 (dd) total-vm:8484kB, anon-rss:1052kB, file-rss:1720kB, shmem-rss:0kB
oom_reaper: reaped process 3876 (dd), now anon-rss:0kB, file-rss:0kB, shmem-rss:0kB
Wake up flushers in legacy cgroup reclaim too.
Link: http://lkml.kernel.org/r/20180315164553.17856-1-aryabinin@virtuozzo.com
Fixes: bbef938429 ("mm: vmscan: remove old flusher wakeup from direct reclaim path")
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Tested-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When a thread mlocks an address space backed either by file pages which
are currently not present in memory or swapped out anon pages (not in
swapcache), a new page is allocated and added to the local pagevec
(lru_add_pvec), I/O is triggered and the thread then sleeps on the page.
On I/O completion, the thread can wake on a different CPU, the mlock
syscall will then sets the PageMlocked() bit of the page but will not be
able to put that page in unevictable LRU as the page is on the pagevec
of a different CPU. Even on drain, that page will go to evictable LRU
because the PageMlocked() bit is not checked on pagevec drain.
The page will eventually go to right LRU on reclaim but the LRU stats
will remain skewed for a long time.
This patch puts all the pages, even unevictable, to the pagevecs and on
the drain, the pages will be added on their LRUs correctly by checking
their evictability. This resolves the mlocked pages on pagevec of other
CPUs issue because when those pagevecs will be drained, the mlocked file
pages will go to unevictable LRU. Also this makes the race with munlock
easier to resolve because the pagevec drains happen in LRU lock.
However there is still one place which makes a page evictable and does
PageLRU check on that page without LRU lock and needs special attention.
TestClearPageMlocked() and isolate_lru_page() in clear_page_mlock().
#0: __pagevec_lru_add_fn #1: clear_page_mlock
SetPageLRU() if (!TestClearPageMlocked())
return
smp_mb() // <--required
// inside does PageLRU
if (!PageMlocked()) if (isolate_lru_page())
move to evictable LRU putback_lru_page()
else
move to unevictable LRU
In '#1', TestClearPageMlocked() provides full memory barrier semantics
and thus the PageLRU check (inside isolate_lru_page) can not be
reordered before it.
In '#0', without explicit memory barrier, the PageMlocked() check can be
reordered before SetPageLRU(). If that happens, '#0' can put a page in
unevictable LRU and '#1' might have just cleared the Mlocked bit of that
page but fails to isolate as PageLRU fails as '#0' still hasn't set
PageLRU bit of that page. That page will be stranded on the unevictable
LRU.
There is one (good) side effect though. Without this patch, the pages
allocated for System V shared memory segment are added to evictable LRUs
even after shmctl(SHM_LOCK) on that segment. This patch will correctly
put such pages to unevictable LRU.
Link: http://lkml.kernel.org/r/20171121211241.18877-1-shakeelb@google.com
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Huang Ying <ying.huang@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Shaohua Li <shli@fb.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Nicholas Piggin <npiggin@gmail.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Hugh Dickins <hughd@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Minchan Kim asked the following question -- what locks protects
address_space destroying when race happens between inode trauncation and
__isolate_lru_page? Jan Kara clarified by describing the race as follows
CPU1 CPU2
truncate(inode) __isolate_lru_page()
...
truncate_inode_page(mapping, page);
delete_from_page_cache(page)
spin_lock_irqsave(&mapping->tree_lock, flags);
__delete_from_page_cache(page, NULL)
page_cache_tree_delete(..)
... mapping = page_mapping(page);
page->mapping = NULL;
...
spin_unlock_irqrestore(&mapping->tree_lock, flags);
page_cache_free_page(mapping, page)
put_page(page)
if (put_page_testzero(page)) -> false
- inode now has no pages and can be freed including embedded address_space
if (mapping && !mapping->a_ops->migratepage)
- we've dereferenced mapping which is potentially already free.
The race is theoretically possible but unlikely. Before the
delete_from_page_cache, truncate_cleanup_page is called so the page is
likely to be !PageDirty or PageWriteback which gets skipped by the only
caller that checks the mappping in __isolate_lru_page. Even if the race
occurs, a substantial amount of work has to happen during a tiny window
with no preemption but it could potentially be done using a virtual
machine to artifically slow one CPU or halt it during the critical
window.
This patch should eliminate the race with truncation by try-locking the
page before derefencing mapping and aborting if the lock was not
acquired. There was a suggestion from Huang Ying to use RCU as a
side-effect to prevent mapping being freed. However, I do not like the
solution as it's an unconventional means of preserving a mapping and
it's not a context where rcu_read_lock is obviously protecting rcu data.
Link: http://lkml.kernel.org/r/20180104102512.2qos3h5vqzeisrek@techsingularity.net
Fixes: c824493528 ("mm: compaction: make isolate_lru_page() filter-aware again")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Remove unused function pgdat_reclaimable_pages() and
node_page_state_snapshot() which becomes unused as well.
Link: http://lkml.kernel.org/r/20171122094416.26019-1-jack@suse.cz
Signed-off-by: Jan Kara <jack@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Shakeel Butt reported he has observed in production systems that the job
loader gets stuck for 10s of seconds while doing a mount operation. It
turns out that it was stuck in register_shrinker() because some
unrelated job was under memory pressure and was spending time in
shrink_slab(). Machines have a lot of shrinkers registered and jobs
under memory pressure have to traverse all of those memcg-aware
shrinkers and affect unrelated jobs which want to register their own
shrinkers.
To solve the issue, this patch simply bails out slab shrinking if it is
found that someone wants to register a shrinker in parallel. A downside
is it could cause unfair shrinking between shrinkers. However, it
should be rare and we can add compilcated logic if we find it's not
enough.
[akpm@linux-foundation.org: tweak code comment]
Link: http://lkml.kernel.org/r/20171115005602.GB23810@bbox
Link: http://lkml.kernel.org/r/1511481899-20335-1-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reported-by: Shakeel Butt <shakeelb@google.com>
Tested-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Previously we were using the ratio of the number of lru pages scanned to
the number of eligible lru pages to determine the number of slab objects
to scan. The problem with this is that these two things have nothing to
do with each other, so in slab heavy work loads where there is little to
no page cache we can end up with the pages scanned being a very low
number. This means that we reclaim next to no slab pages and waste a
lot of time reclaiming small amounts of space.
Consider the following scenario, where we have the following values and
the rest of the memory usage is in slab
Active: 58840 kB
Inactive: 46860 kB
Every time we do a get_scan_count() we do this
scan = size >> sc->priority
where sc->priority starts at DEF_PRIORITY, which is 12. The first loop
through reclaim would result in a scan target of 2 pages to 11715 total
inactive pages, and 3 pages to 14710 total active pages. This is a
really really small target for a system that is entirely slab pages.
And this is super optimistic, this assumes we even get to scan these
pages. We don't increment sc->nr_scanned unless we 1) isolate the page,
which assumes it's not in use, and 2) can lock the page. Under pressure
these numbers could probably go down, I'm sure there's some random pages
from daemons that aren't actually in use, so the targets get even
smaller.
Instead use sc->priority in the same way we use it to determine scan
amounts for the lru's. This generally equates to pages. Consider the
following
slab_pages = (nr_objects * object_size) / PAGE_SIZE
What we would like to do is
scan = slab_pages >> sc->priority
but we don't know the number of slab pages each shrinker controls, only
the objects. However say that theoretically we knew how many pages a
shrinker controlled, we'd still have to convert this to objects, which
would look like the following
scan = shrinker_pages >> sc->priority
scan_objects = (PAGE_SIZE / object_size) * scan
or written another way
scan_objects = (shrinker_pages >> sc->priority) *
(PAGE_SIZE / object_size)
which can thus be written
scan_objects = ((shrinker_pages * PAGE_SIZE) / object_size) >>
sc->priority
which is just
scan_objects = nr_objects >> sc->priority
We don't need to know exactly how many pages each shrinker represents,
it's objects are all the information we need. Making this change allows
us to place an appropriate amount of pressure on the shrinker pools for
their relative size.
Link: http://lkml.kernel.org/r/1510780549-6812-1-git-send-email-josef@toxicpanda.com
Signed-off-by: Josef Bacik <jbacik@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Dave Chinner <david@fromorbit.com>
Acked-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Most callers users of free_hot_cold_page claim the pages being released
are cache hot. The exception is the page reclaim paths where it is
likely that enough pages will be freed in the near future that the
per-cpu lists are going to be recycled and the cache hotness information
is lost. As no one really cares about the hotness of pages being
released to the allocator, just ditch the parameter.
The APIs are renamed to indicate that it's no longer about hot/cold
pages. It should also be less confusing as there are subtle differences
between them. __free_pages drops a reference and frees a page when the
refcount reaches zero. free_hot_cold_page handled pages whose refcount
was already zero which is non-obvious from the name. free_unref_page
should be more obvious.
No performance impact is expected as the overhead is marginal. The
parameter is removed simply because it is a bit stupid to have a useless
parameter copied everywhere.
[mgorman@techsingularity.net: add pages to head, not tail]
Link: http://lkml.kernel.org/r/20171019154321.qtpzaeftoyyw4iey@techsingularity.net
Link: http://lkml.kernel.org/r/20171018075952.10627-8-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit 59dc76b0d4 ("mm: vmscan: reduce size of inactive file
list") 'pgdat->inactive_ratio' is not used, except for printing
"node_inactive_ratio: 0" in /proc/zoneinfo output.
Remove it.
Link: http://lkml.kernel.org/r/20171003152611.27483-1-aryabinin@virtuozzo.com
Signed-off-by: Andrey Ryabinin <aryabinin@virtuozzo.com>
Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull core block layer updates from Jens Axboe:
"This is the main pull request for block storage for 4.15-rc1.
Nothing out of the ordinary in here, and no API changes or anything
like that. Just various new features for drivers, core changes, etc.
In particular, this pull request contains:
- A patch series from Bart, closing the whole on blk/scsi-mq queue
quescing.
- A series from Christoph, building towards hidden gendisks (for
multipath) and ability to move bio chains around.
- NVMe
- Support for native multipath for NVMe (Christoph).
- Userspace notifications for AENs (Keith).
- Command side-effects support (Keith).
- SGL support (Chaitanya Kulkarni)
- FC fixes and improvements (James Smart)
- Lots of fixes and tweaks (Various)
- bcache
- New maintainer (Michael Lyle)
- Writeback control improvements (Michael)
- Various fixes (Coly, Elena, Eric, Liang, et al)
- lightnvm updates, mostly centered around the pblk interface
(Javier, Hans, and Rakesh).
- Removal of unused bio/bvec kmap atomic interfaces (me, Christoph)
- Writeback series that fix the much discussed hundreds of millions
of sync-all units. This goes all the way, as discussed previously
(me).
- Fix for missing wakeup on writeback timer adjustments (Yafang
Shao).
- Fix laptop mode on blk-mq (me).
- {mq,name} tupple lookup for IO schedulers, allowing us to have
alias names. This means you can use 'deadline' on both !mq and on
mq (where it's called mq-deadline). (me).
- blktrace race fix, oopsing on sg load (me).
- blk-mq optimizations (me).
- Obscure waitqueue race fix for kyber (Omar).
- NBD fixes (Josef).
- Disable writeback throttling by default on bfq, like we do on cfq
(Luca Miccio).
- Series from Ming that enable us to treat flush requests on blk-mq
like any other request. This is a really nice cleanup.
- Series from Ming that improves merging on blk-mq with schedulers,
getting us closer to flipping the switch on scsi-mq again.
- BFQ updates (Paolo).
- blk-mq atomic flags memory ordering fixes (Peter Z).
- Loop cgroup support (Shaohua).
- Lots of minor fixes from lots of different folks, both for core and
driver code"
* 'for-4.15/block' of git://git.kernel.dk/linux-block: (294 commits)
nvme: fix visibility of "uuid" ns attribute
blk-mq: fixup some comment typos and lengths
ide: ide-atapi: fix compile error with defining macro DEBUG
blk-mq: improve tag waiting setup for non-shared tags
brd: remove unused brd_mutex
blk-mq: only run the hardware queue if IO is pending
block: avoid null pointer dereference on null disk
fs: guard_bio_eod() needs to consider partitions
xtensa/simdisk: fix compile error
nvme: expose subsys attribute to sysfs
nvme: create 'slaves' and 'holders' entries for hidden controllers
block: create 'slaves' and 'holders' entries for hidden gendisks
nvme: also expose the namespace identification sysfs files for mpath nodes
nvme: implement multipath access to nvme subsystems
nvme: track shared namespaces
nvme: introduce a nvme_ns_ids structure
nvme: track subsystems
block, nvme: Introduce blk_mq_req_flags_t
block, scsi: Make SCSI quiesce and resume work reliably
block: Add the QUEUE_FLAG_PREEMPT_ONLY request queue flag
...
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Everybody is passing in 0 now, let's get rid of the argument.
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
When swapping out THP (Transparent Huge Page), instead of swapping out
the THP as a whole, sometimes we have to fallback to split the THP into
normal pages before swapping, because no free swap clusters are
available, or cgroup limit is exceeded, etc. To count the number of the
fallback, a new VM event THP_SWPOUT_FALLBACK is added, and counted when
we fallback to split the THP.
Link: http://lkml.kernel.org/r/20170724051840.2309-13-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ross Zwisler <ross.zwisler@intel.com> [for brd.c, zram_drv.c, pmem.c]
Cc: Vishal L Verma <vishal.l.verma@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In this patch, splitting transparent huge page (THP) during swapping out
is delayed from after adding the THP into the swap cache to after
swapping out finishes. After the patch, more operations for the
anonymous THP reclaiming, such as writing the THP to the swap device,
removing the THP from the swap cache could be batched. So that the
performance of anonymous THP swapping out could be improved.
This is the second step for the THP swap support. The plan is to delay
splitting the THP step by step and avoid splitting the THP finally.
With the patchset, the swap out throughput improves 42% (from about
5.81GB/s to about 8.25GB/s) in the vm-scalability swap-w-seq test case
with 16 processes. At the same time, the IPI (reflect TLB flushing)
reduced about 78.9%. The test is done on a Xeon E5 v3 system. The swap
device used is a RAM simulated PMEM (persistent memory) device. To test
the sequential swapping out, the test case creates 8 processes, which
sequentially allocate and write to the anonymous pages until the RAM and
part of the swap device is used up.
Link: http://lkml.kernel.org/r/20170724051840.2309-12-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Ross Zwisler <ross.zwisler@intel.com> [for brd.c, zram_drv.c, pmem.c]
Cc: Vishal L Verma <vishal.l.verma@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tetsuo Handa has reported[1][2][3] that direct reclaimers might get
stuck in too_many_isolated loop basically for ever because the last few
pages on the LRU lists are isolated by the kswapd which is stuck on fs
locks when doing the pageout or slab reclaim. This in turn means that
there is nobody to actually trigger the oom killer and the system is
basically unusable.
too_many_isolated has been introduced by commit 35cd78156c ("vmscan:
throttle direct reclaim when too many pages are isolated already") to
prevent from pre-mature oom killer invocations because back then no
reclaim progress could indeed trigger the OOM killer too early.
But since the oom detection rework in commit 0a0337e0d1 ("mm, oom:
rework oom detection") the allocation/reclaim retry loop considers all
the reclaimable pages and throttles the allocation at that layer so we
can loosen the direct reclaim throttling.
Make shrink_inactive_list loop over too_many_isolated bounded and
returns immediately when the situation hasn't resolved after the first
sleep.
Replace congestion_wait by a simple schedule_timeout_interruptible
because we are not really waiting on the IO congestion in this path.
Please note that this patch can theoretically cause the OOM killer to
trigger earlier while there are many pages isolated for the reclaim
which makes progress only very slowly. This would be obvious from the
oom report as the number of isolated pages are printed there. If we
ever hit this should_reclaim_retry should consider those numbers in the
evaluation in one way or another.
[1] http://lkml.kernel.org/r/201602092349.ACG81273.OSVtMJQHLOFOFF@I-love.SAKURA.ne.jp
[2] http://lkml.kernel.org/r/201702212335.DJB30777.JOFMHSFtVLQOOF@I-love.SAKURA.ne.jp
[3] http://lkml.kernel.org/r/201706300914.CEH95859.FMQOLVFHJFtOOS@I-love.SAKURA.ne.jp
[mhocko@suse.com: switch to uninterruptible sleep]
Link: http://lkml.kernel.org/r/20170724065048.GB25221@dhcp22.suse.cz
Link: http://lkml.kernel.org/r/20170710074842.23175-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Rik van Riel <riel@redhat.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some shrinkers may only be able to free a bunch of objects at a time,
and so free more than the requested nr_to_scan in one pass.
Whilst other shrinkers may find themselves even unable to scan as many
objects as they counted, and so underreport. Account for the extra
freed/scanned objects against the total number of objects we intend to
scan, otherwise we may end up penalising the slab far more than
intended. Similarly, we want to add the underperforming scan to the
deferred pass so that we try harder and harder in future passes.
Link: http://lkml.kernel.org/r/20170822135325.9191-1-chris@chris-wilson.co.uk
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Shaohua Li <shli@fb.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A while ago someone, and I cannot find the email just now, asked if we
could not implement the RECLAIM_FS inversion stuff with a 'fake' lock
like we use for other things like workqueues etc. I think this should
be possible which allows reducing the 'irq' states and will reduce the
amount of __bfs() lookups we do.
Removing the 1 IRQ state results in 4 less __bfs() walks per
dependency, improving lockdep performance. And by moving this
annotation out of the lockdep code it becomes easier for the mm people
to extend.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Byungchul Park <byungchul.park@lge.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Nikolay Borisov <nborisov@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: akpm@linux-foundation.org
Cc: boqun.feng@gmail.com
Cc: iamjoonsoo.kim@lge.com
Cc: kernel-team@lge.com
Cc: kirill@shutemov.name
Cc: npiggin@gmail.com
Cc: walken@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
__GFP_REPEAT was designed to allow retry-but-eventually-fail semantic to
the page allocator. This has been true but only for allocations
requests larger than PAGE_ALLOC_COSTLY_ORDER. It has been always
ignored for smaller sizes. This is a bit unfortunate because there is
no way to express the same semantic for those requests and they are
considered too important to fail so they might end up looping in the
page allocator for ever, similarly to GFP_NOFAIL requests.
Now that the whole tree has been cleaned up and accidental or misled
usage of __GFP_REPEAT flag has been removed for !costly requests we can
give the original flag a better name and more importantly a more useful
semantic. Let's rename it to __GFP_RETRY_MAYFAIL which tells the user
that the allocator would try really hard but there is no promise of a
success. This will work independent of the order and overrides the
default allocator behavior. Page allocator users have several levels of
guarantee vs. cost options (take GFP_KERNEL as an example)
- GFP_KERNEL & ~__GFP_RECLAIM - optimistic allocation without _any_
attempt to free memory at all. The most light weight mode which even
doesn't kick the background reclaim. Should be used carefully because
it might deplete the memory and the next user might hit the more
aggressive reclaim
- GFP_KERNEL & ~__GFP_DIRECT_RECLAIM (or GFP_NOWAIT)- optimistic
allocation without any attempt to free memory from the current
context but can wake kswapd to reclaim memory if the zone is below
the low watermark. Can be used from either atomic contexts or when
the request is a performance optimization and there is another
fallback for a slow path.
- (GFP_KERNEL|__GFP_HIGH) & ~__GFP_DIRECT_RECLAIM (aka GFP_ATOMIC) -
non sleeping allocation with an expensive fallback so it can access
some portion of memory reserves. Usually used from interrupt/bh
context with an expensive slow path fallback.
- GFP_KERNEL - both background and direct reclaim are allowed and the
_default_ page allocator behavior is used. That means that !costly
allocation requests are basically nofail but there is no guarantee of
that behavior so failures have to be checked properly by callers
(e.g. OOM killer victim is allowed to fail currently).
- GFP_KERNEL | __GFP_NORETRY - overrides the default allocator behavior
and all allocation requests fail early rather than cause disruptive
reclaim (one round of reclaim in this implementation). The OOM killer
is not invoked.
- GFP_KERNEL | __GFP_RETRY_MAYFAIL - overrides the default allocator
behavior and all allocation requests try really hard. The request
will fail if the reclaim cannot make any progress. The OOM killer
won't be triggered.
- GFP_KERNEL | __GFP_NOFAIL - overrides the default allocator behavior
and all allocation requests will loop endlessly until they succeed.
This might be really dangerous especially for larger orders.
Existing users of __GFP_REPEAT are changed to __GFP_RETRY_MAYFAIL
because they already had their semantic. No new users are added.
__alloc_pages_slowpath is changed to bail out for __GFP_RETRY_MAYFAIL if
there is no progress and we have already passed the OOM point.
This means that all the reclaim opportunities have been exhausted except
the most disruptive one (the OOM killer) and a user defined fallback
behavior is more sensible than keep retrying in the page allocator.
[akpm@linux-foundation.org: fix arch/sparc/kernel/mdesc.c]
[mhocko@suse.com: semantic fix]
Link: http://lkml.kernel.org/r/20170626123847.GM11534@dhcp22.suse.cz
[mhocko@kernel.org: address other thing spotted by Vlastimil]
Link: http://lkml.kernel.org/r/20170626124233.GN11534@dhcp22.suse.cz
Link: http://lkml.kernel.org/r/20170623085345.11304-3-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Alex Belits <alex.belits@cavium.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: David Daney <david.daney@cavium.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: NeilBrown <neilb@suse.com>
Cc: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The purpose of the code that commit 623762517e ("revert 'mm: vmscan:
do not swap anon pages just because free+file is low'") reintroduces is
to prefer swapping anonymous memory rather than trashing the file lru.
If the anonymous inactive lru for the set of eligible zones is
considered low, however, or the length of the list for the given reclaim
priority does not allow for effective anonymous-only reclaiming, then
avoid forcing SCAN_ANON. Forcing SCAN_ANON will end up thrashing the
small list and leave unreclaimed memory on the file lrus.
If the inactive list is insufficient, fallback to balanced reclaim so
the file lru doesn't remain untouched.
[akpm@linux-foundation.org: fix build]
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1705011432220.137835@chino.kir.corp.google.com
Signed-off-by: David Rientjes <rientjes@google.com>
Suggested-by: Minchan Kim <minchan@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm: per-lruvec slab stats"
Josef is working on a new approach to balancing slab caches and the page
cache. For this to work, he needs slab cache statistics on the lruvec
level. These patches implement that by adding infrastructure that
allows updating and reading generic VM stat items per lruvec, then
switches some existing VM accounting sites, including the slab
accounting ones, to this new cgroup-aware API.
I'll follow up with more patches on this, because there is actually
substantial simplification that can be done to the memory controller
when we replace private memcg accounting with making the existing VM
accounting sites cgroup-aware. But this is enough for Josef to base his
slab reclaim work on, so here goes.
This patch (of 5):
To re-implement slab cache vs. page cache balancing, we'll need the
slab counters at the lruvec level, which, ever since lru reclaim was
moved from the zone to the node, is the intersection of the node, not
the zone, and the memcg.
We could retain the per-zone counters for when the page allocator dumps
its memory information on failures, and have counters on both levels -
which on all but NUMA node 0 is usually redundant. But let's keep it
simple for now and just move them. If anybody complains we can restore
the per-zone counters.
[hannes@cmpxchg.org: fix oops]
Link: http://lkml.kernel.org/r/20170605183511.GA8915@cmpxchg.org
Link: http://lkml.kernel.org/r/20170530181724.27197-3-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Track the following reclaim counters for every memory cgroup: PGREFILL,
PGSCAN, PGSTEAL, PGACTIVATE, PGDEACTIVATE, PGLAZYFREE and PGLAZYFREED.
These values are exposed using the memory.stats interface of cgroup v2.
The meaning of each value is the same as for global counters, available
using /proc/vmstat.
Also, for consistency, rename mem_cgroup_count_vm_event() to
count_memcg_event_mm().
Link: http://lkml.kernel.org/r/1494530183-30808-1-git-send-email-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Li Zefan <lizefan@huawei.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If there is no compound map for a THP (Transparent Huge Page), it is
possible that the map count of some sub-pages of the THP is 0. So it is
better to split the THP before swapping out. In this way, the sub-pages
not mapped will be freed, and we can avoid the unnecessary swap out
operations for these sub-pages.
Link: http://lkml.kernel.org/r/20170515112522.32457-6-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To swap out THP (Transparent Huage Page), before splitting the THP, the
swap cluster will be allocated and the THP will be added into the swap
cache. But it is possible that the THP cannot be split, so that we must
delete the THP from the swap cache and free the swap cluster. To avoid
that, in this patch, whether the THP can be split is checked firstly.
The check can only be done racy, but it is good enough for most cases.
With the patch, the swap out throughput improves 3.6% (from about
4.16GB/s to about 4.31GB/s) in the vm-scalability swap-w-seq test case
with 8 processes. The test is done on a Xeon E5 v3 system. The swap
device used is a RAM simulated PMEM (persistent memory) device. To test
the sequential swapping out, the test case creates 8 processes, which
sequentially allocate and write to the anonymous pages until the RAM and
part of the swap device is used up.
Link: http://lkml.kernel.org/r/20170515112522.32457-5-ying.huang@intel.com
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> [for can_split_huge_page()]
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The add_to_swap aims to allocate swap_space(ie, swap slot and swapcache)
so if it fails due to lack of space in case of THP or something(hdd swap
but tries THP swapout) *caller* rather than add_to_swap itself should
split the THP page and retry it with base page which is more natural.
Link: http://lkml.kernel.org/r/20170515112522.32457-4-ying.huang@intel.com
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now, get_swap_page takes struct page and allocates swap space according
to page size(ie, normal or THP) so it would be more cleaner to introduce
put_swap_page which is a counter function of get_swap_page. Then, it
calls right swap slot free function depending on page's size.
[ying.huang@intel.com: minor cleanup and fix]
Link: http://lkml.kernel.org/r/20170515112522.32457-3-ying.huang@intel.com
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: "Huang, Ying" <ying.huang@intel.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Ebru Akagunduz <ebru.akagunduz@gmail.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Clang and its -Wunsequenced emits a warning
mm/vmscan.c:2961:25: error: unsequenced modification and access to 'gfp_mask' [-Wunsequenced]
.gfp_mask = (gfp_mask = current_gfp_context(gfp_mask)),
^
While it is not clear to me whether the initialization code violates the
specification (6.7.8 par 19 (ISO/IEC 9899) looks like it disagrees) the
code is quite confusing and worth cleaning up anyway. Fix this by
reusing sc.gfp_mask rather than the updated input gfp_mask parameter.
Link: http://lkml.kernel.org/r/20170510154030.10720-1-nick.desaulniers@gmail.com
Signed-off-by: Nick Desaulniers <nick.desaulniers@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
To enable smp_processor_id() and might_sleep() debug checks earlier, it's
required to add system states between SYSTEM_BOOTING and SYSTEM_RUNNING.
Adjust the system_state check in kswapd_run() to handle the extra states.
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170516184736.119158930@linutronix.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
The previous patch ("mm: prevent potential recursive reclaim due to
clearing PF_MEMALLOC") has shown that simply setting and clearing
PF_MEMALLOC in current->flags can result in wrongly clearing a
pre-existing PF_MEMALLOC flag and potentially lead to recursive reclaim.
Let's introduce helpers that support proper nesting by saving the
previous stat of the flag, similar to the existing memalloc_noio_* and
memalloc_nofs_* helpers. Convert existing setting/clearing of
PF_MEMALLOC within mm to the new helpers.
There are no known issues with the converted code, but the change makes
it more robust.
Link: http://lkml.kernel.org/r/20170405074700.29871-3-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Suggested-by: Michal Hocko <mhocko@suse.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: Chris Leech <cleech@redhat.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: Lee Duncan <lduncan@suse.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Richard Weinberger <richard@nod.at>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The memory controllers stat function names are awkwardly long and
arbitrarily different from the zone and node stat functions.
The current interface is named:
mem_cgroup_read_stat()
mem_cgroup_update_stat()
mem_cgroup_inc_stat()
mem_cgroup_dec_stat()
mem_cgroup_update_page_stat()
mem_cgroup_inc_page_stat()
mem_cgroup_dec_page_stat()
This patch renames it to match the corresponding node stat functions:
memcg_page_state() [node_page_state()]
mod_memcg_state() [mod_node_state()]
inc_memcg_state() [inc_node_state()]
dec_memcg_state() [dec_node_state()]
mod_memcg_page_state() [mod_node_page_state()]
inc_memcg_page_state() [inc_node_page_state()]
dec_memcg_page_state() [dec_node_page_state()]
Link: http://lkml.kernel.org/r/20170404220148.28338-4-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The current duplication is a high-maintenance mess, and it's painful to
add new items or query memcg state from the rest of the VM.
This increases the size of the stat array marginally, but we should aim
to track all these stats on a per-cgroup level anyway.
Link: http://lkml.kernel.org/r/20170404220148.28338-3-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We only ever count single events, drop the @nr parameter. Rename the
function accordingly. Remove low-information kerneldoc.
Link: http://lkml.kernel.org/r/20170404220148.28338-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit 59dc76b0d4 ("mm: vmscan: reduce size of inactive file
list") we noticed bigger IO spikes during changes in cache access
patterns.
The patch in question shrunk the inactive list size to leave more room
for the current workingset in the presence of streaming IO. However,
workingset transitions that previously happened on the inactive list are
now pushed out of memory and incur more refaults to complete.
This patch disables active list protection when refaults are being
observed. This accelerates workingset transitions, and allows more of
the new set to establish itself from memory, without eating into the
ability to protect the established workingset during stable periods.
The workloads that were measurably affected for us were hit pretty bad
by it, with refault/majfault rates doubling and tripling during cache
transitions, and the machines sustaining half-hour periods of 100% IO
utilization, where they'd previously have sub-minute peaks at 60-90%.
Stateful services that handle user data tend to be more conservative
with kernel upgrades. As a result we hit most page cache issues with
some delay, as was the case here.
The severity seemed to warrant a stable tag.
Fixes: 59dc76b0d4 ("mm: vmscan: reduce size of inactive file list")
Link: http://lkml.kernel.org/r/20170404220052.27593-1-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <stable@vger.kernel.org> [4.7+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In 2002, [1] introduced SWAP_AGAIN. At that time, try_to_unmap_one used
spin_trylock(&mm->page_table_lock) so it's really easy to contend and
fail to hold a lock so SWAP_AGAIN to keep LRU status makes sense.
However, now we changed it to mutex-based lock and be able to block
without skip pte so there is few of small window to return SWAP_AGAIN so
remove SWAP_AGAIN and just return SWAP_FAIL.
[1] c48c43e, minimal rmap
Link: http://lkml.kernel.org/r/1489555493-14659-7-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
ttu doesn't need to return SWAP_MLOCK. Instead, just return SWAP_FAIL
because it means the page is not-swappable so it should move to another
LRU list(active or unevictable). putback friends will move it to right
list depending on the page's LRU flag.
Link: http://lkml.kernel.org/r/1489555493-14659-6-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If we found lazyfree page is dirty, try_to_unmap_one can just
SetPageSwapBakced in there like PG_mlocked page and just return with
SWAP_FAIL which is very natural because the page is not swappable right
now so that vmscan can activate it. There is no point to introduce new
return value SWAP_DIRTY in try_to_unmap at the moment.
Link: http://lkml.kernel.org/r/1489555493-14659-3-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
By reviewing code, I find that when enter do_try_to_free_pages, the
may_thrash is always clear, and it will retry shrink zones to tap
cgroup's reserves memory by setting may_thrash when the former
shrink_zones reclaim nothing.
However, when memcg is disabled or on legacy hierarchy, or there do not
have any memcg protected by low limit, it should not do this useless
retry at all, for we do not have any cgroup's reserves memory to tap,
and we have already done hard work but made no progress, which as Michal
pointed out in former version, we are trying hard to control the retry
logical of page alloctor, and the current additional round of reclaim is
just lame.
Therefore, to avoid this unneeded retrying and make code more readable,
we remove the may_thrash field in scan_control, instead, introduce
memcg_low_reclaim and memcg_low_skipped, and only retry when
memcg_low_skipped, by setting memcg_low_reclaim.
[xieyisheng1@huawei.com: remove may_thrash field, introduce mem_cgroup_reclaim]
Link: http://lkml.kernel.org/r/1490191893-5923-1-git-send-email-ysxie@foxmail.com
Link: http://lkml.kernel.org/r/1490191893-5923-1-git-send-email-ysxie@foxmail.com
Signed-off-by: Yisheng Xie <xieyisheng1@huawei.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Suggested-by: Michal Hocko <mhocko@kernel.org>
Suggested-by: Shakeel Butt <shakeelb@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kswapd is woken to reclaim a node based on a failed allocation request
from any eligible zone. Once reclaiming in balance_pgdat(), it will
continue reclaiming until there is an eligible zone available for the
zone it was woken for. kswapd tracks what zone it was recently woken
for in pgdat->kswapd_classzone_idx. If it has not been woken recently,
this zone will be 0.
However, the decision on whether to sleep is made on
kswapd_classzone_idx which is 0 without a recent wakeup request and that
classzone does not account for lowmem reserves. This allows kswapd to
sleep when a low small zone such as ZONE_DMA is balanced for a GFP_DMA
request even if a stream of allocations cannot use that zone. While
kswapd may be woken again shortly in the near future there are two
consequences -- the pgdat bits that control congestion are cleared
prematurely and direct reclaim is more likely as kswapd slept
prematurely.
This patch flips kswapd_classzone_idx to default to MAX_NR_ZONES (an
invalid index) when there has been no recent wakeups. If there are no
wakeups, it'll decide whether to sleep based on the highest possible
zone available (MAX_NR_ZONES - 1). It then becomes critical that the
"pgdat balanced" decisions during reclaim and when deciding to sleep are
the same. If there is a mismatch, kswapd can stay awake continually
trying to balance tiny zones.
simoop was used to evaluate it again. Two of the preparation patches
regressed the workload so they are included as the second set of
results. Otherwise this patch looks artifically excellent
4.11.0-rc1 4.11.0-rc1 4.11.0-rc1
vanilla clear-v2 keepawake-v2
Amean p50-Read 21670074.18 ( 0.00%) 19786774.76 ( 8.69%) 22668332.52 ( -4.61%)
Amean p95-Read 25456267.64 ( 0.00%) 24101956.27 ( 5.32%) 26738688.00 ( -5.04%)
Amean p99-Read 29369064.73 ( 0.00%) 27691872.71 ( 5.71%) 30991404.52 ( -5.52%)
Amean p50-Write 1390.30 ( 0.00%) 1011.91 ( 27.22%) 924.91 ( 33.47%)
Amean p95-Write 412901.57 ( 0.00%) 34874.98 ( 91.55%) 1362.62 ( 99.67%)
Amean p99-Write 6668722.09 ( 0.00%) 575449.60 ( 91.37%) 16854.04 ( 99.75%)
Amean p50-Allocation 78714.31 ( 0.00%) 84246.26 ( -7.03%) 74729.74 ( 5.06%)
Amean p95-Allocation 175533.51 ( 0.00%) 400058.43 (-127.91%) 101609.74 ( 42.11%)
Amean p99-Allocation 247003.02 ( 0.00%) 10905600.00 (-4315.17%) 125765.57 ( 49.08%)
With this patch on top, write and allocation latencies are massively
improved. The read latencies are slightly impaired but it's worth
noting that this is mostly due to the IO scheduler and not directly
related to reclaim. The vmstats are a bit of a mix but the relevant
ones are as follows;
4.10.0-rc7 4.10.0-rc7 4.10.0-rc7
mmots-20170209 clear-v1r25keepawake-v1r25
Swap Ins 0 0 0
Swap Outs 0 608 0
Direct pages scanned 6910672 31326996357298
Kswapd pages scanned 57036946 82488665 56986286
Kswapd pages reclaimed 55993488 63474329 55939113
Direct pages reclaimed 6905990 2964843 6352115
Kswapd efficiency 98% 76% 98%
Kswapd velocity 12494.375 17597.507 12488.065
Direct efficiency 99% 94% 99%
Direct velocity 1513.835 668.306 1393.148
Page writes by reclaim 0.000 4410243.000 0.000
Page writes file 0 4409635 0
Page writes anon 0 608 0
Page reclaim immediate 1036792 14175203 1042571
4.11.0-rc1 4.11.0-rc1 4.11.0-rc1
vanilla clear-v2 keepawake-v2
Swap Ins 0 12 0
Swap Outs 0 838 0
Direct pages scanned 6579706 3237270 6256811
Kswapd pages scanned 61853702 79961486 54837791
Kswapd pages reclaimed 60768764 60755788 53849586
Direct pages reclaimed 6579055 2987453 6256151
Kswapd efficiency 98% 75% 98%
Page writes by reclaim 0.000 4389496.000 0.000
Page writes file 0 4388658 0
Page writes anon 0 838 0
Page reclaim immediate 1073573 14473009 982507
Swap-outs are equivalent to baseline.
Direct reclaim is reduced but not eliminated. It's worth noting that
there are two periods of direct reclaim for this workload. The first is
when it switches from preparing the files for the actual test itself.
It's a lot of file IO followed by a lot of allocs that reclaims heavily
for a brief window. While direct reclaim is lower with clear-v2, it is
due to kswapd scanning aggressively and trying to reclaim the world
which is not the right thing to do. With the patches applied, there is
still direct reclaim but the phase change from "creating work files" to
starting multiple threads that allocate a lot of anonymous memory faster
than kswapd can reclaim.
Scanning/reclaim efficiency is restored by this patch.
Page writes from reclaim context are back at 0 which is ideal.
Pages immediately reclaimed after IO completes is slightly improved but
it is expected this will vary slightly.
On UMA, there is almost no change so this is not expected to be a
universal win.
[mgorman@suse.de: fix ->kswapd_classzone_idx initialization]
Link: http://lkml.kernel.org/r/20170406174538.5msrznj6nt6qpbx5@suse.de
Link: http://lkml.kernel.org/r/20170309075657.25121-4-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shantanu Goel <sgoel01@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A pgdat tracks if recent reclaim encountered too many dirty, writeback
or congested pages. The flags control whether kswapd writes pages back
from reclaim context, tags pages for immediate reclaim when IO
completes, whether processes block on wait_iff_congested and whether
kswapd blocks when too many pages marked for immediate reclaim are
encountered.
The state is cleared in a check function with side-effects. With the
patch "mm, vmscan: fix zone balance check in prepare_kswapd_sleep", the
timing of when the bits get cleared changed. Due to the way the check
works, it'll clear the bits if ZONE_DMA is balanced for a GFP_DMA
allocation because it does not account for lowmem reserves properly.
For the simoop workload, kswapd is not stalling when it should due to
the premature clearing, writing pages from reclaim context like crazy
and generally being unhelpful.
This patch resets the pgdat bits related to page reclaim only when
kswapd is going to sleep. The comparison with simoop is then
4.11.0-rc1 4.11.0-rc1 4.11.0-rc1
vanilla fixcheck-v2 clear-v2
Amean p50-Read 21670074.18 ( 0.00%) 20464344.18 ( 5.56%) 19786774.76 ( 8.69%)
Amean p95-Read 25456267.64 ( 0.00%) 25721423.64 ( -1.04%) 24101956.27 ( 5.32%)
Amean p99-Read 29369064.73 ( 0.00%) 30174230.76 ( -2.74%) 27691872.71 ( 5.71%)
Amean p50-Write 1390.30 ( 0.00%) 1395.28 ( -0.36%) 1011.91 ( 27.22%)
Amean p95-Write 412901.57 ( 0.00%) 37737.74 ( 90.86%) 34874.98 ( 91.55%)
Amean p99-Write 6668722.09 ( 0.00%) 666489.04 ( 90.01%) 575449.60 ( 91.37%)
Amean p50-Allocation 78714.31 ( 0.00%) 86286.22 ( -9.62%) 84246.26 ( -7.03%)
Amean p95-Allocation 175533.51 ( 0.00%) 351812.27 (-100.42%) 400058.43 (-127.91%)
Amean p99-Allocation 247003.02 ( 0.00%) 6291171.56 (-2447.00%) 10905600.00 (-4315.17%)
Read latency is improved, write latency is mostly improved but
allocation latency is regressed. kswapd is still reclaiming
inefficiently, pages are being written back from writeback context and a
host of other issues. However, given the change, it needed to be
spelled out why the side-effect was moved.
Link: http://lkml.kernel.org/r/20170309075657.25121-3-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Shantanu Goel <sgoel01@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "Reduce amount of time kswapd sleeps prematurely", v2.
The series is unusual in that the first patch fixes one problem and
introduces other issues that are noted in the changelog. Patch 2 makes
a minor modification that is worth considering on its own but leaves the
kernel in a state where it behaves badly. It's not until patch 3 that
there is an improvement against baseline.
This was mostly motivated by examining Chris Mason's "simoop" benchmark
which puts the VM under similar pressure to HADOOP. It has been
reported that the benchmark has regressed severely during the last
number of releases. While I cannot reproduce all the same problems
Chris experienced due to hardware limitations, there was a number of
problems on a 2-socket machine with a single disk.
simoop latencies
4.11.0-rc1 4.11.0-rc1
vanilla keepawake-v2
Amean p50-Read 21670074.18 ( 0.00%) 22668332.52 ( -4.61%)
Amean p95-Read 25456267.64 ( 0.00%) 26738688.00 ( -5.04%)
Amean p99-Read 29369064.73 ( 0.00%) 30991404.52 ( -5.52%)
Amean p50-Write 1390.30 ( 0.00%) 924.91 ( 33.47%)
Amean p95-Write 412901.57 ( 0.00%) 1362.62 ( 99.67%)
Amean p99-Write 6668722.09 ( 0.00%) 16854.04 ( 99.75%)
Amean p50-Allocation 78714.31 ( 0.00%) 74729.74 ( 5.06%)
Amean p95-Allocation 175533.51 ( 0.00%) 101609.74 ( 42.11%)
Amean p99-Allocation 247003.02 ( 0.00%) 125765.57 ( 49.08%)
These are latencies. Read/write are threads reading fixed-size random
blocks from a simulated database. The allocation latency is mmaping and
faulting regions of memory. The p50, 95 and p99 reports the worst
latencies for 50% of the samples, 95% and 99% respectively.
For example, the report indicates that while the test was running 99% of
writes completed 99.75% faster. It's worth noting that on a UMA machine
that no difference in performance with simoop was observed so milage
will vary.
It's noted that there is a slight impact to read latencies but it's
mostly due to IO scheduler decisions and offset by the large reduction
in other latencies.
This patch (of 3):
The check in prepare_kswapd_sleep needs to match the one in
balance_pgdat since the latter will return as soon as any one of the
zones in the classzone is above the watermark. This is specially
important for higher order allocations since balance_pgdat will
typically reset the order to zero relying on compaction to create the
higher order pages. Without this patch, prepare_kswapd_sleep fails to
wake up kcompactd since the zone balance check fails.
It was first reported against 4.9.7 that kswapd is failing to wake up
kcompactd due to a mismatch in the zone balance check between
balance_pgdat() and prepare_kswapd_sleep().
balance_pgdat() returns as soon as a single zone satisfies the
allocation but prepare_kswapd_sleep() requires all zones to do +the
same. This causes prepare_kswapd_sleep() to never succeed except in the
order == 0 case and consequently, wakeup_kcompactd() is never called.
For the machine that originally motivated this patch, the state of
compaction from /proc/vmstat looked this way after a day and a half +of
uptime:
compact_migrate_scanned 240496
compact_free_scanned 76238632
compact_isolated 123472
compact_stall 1791
compact_fail 29
compact_success 1762
compact_daemon_wake 0
After applying the patch and about 10 hours of uptime the state looks
like this:
compact_migrate_scanned 59927299
compact_free_scanned 2021075136
compact_isolated 640926
compact_stall 4
compact_fail 2
compact_success 2
compact_daemon_wake 5160
Further notes from Mel that motivated him to pick this patch up and
resend it;
It was observed for the simoop workload (pressures the VM similar to
HADOOP) that kswapd was failing to keep ahead of direct reclaim. The
investigation noted that there was a need to rationalise kswapd
decisions to reclaim with kswapd decisions to sleep. With this patch on
a 2-socket box, there was a 49% reduction in direct reclaim scanning.
However, the impact otherwise is extremely negative. Kswapd reclaim
efficiency dropped from 98% to 76%. simoop has three latency-related
metrics for read, write and allocation (an anonymous mmap and fault).
4.11.0-rc1 4.11.0-rc1
vanilla fixcheck-v2
Amean p50-Read 21670074.18 ( 0.00%) 20464344.18 ( 5.56%)
Amean p95-Read 25456267.64 ( 0.00%) 25721423.64 ( -1.04%)
Amean p99-Read 29369064.73 ( 0.00%) 30174230.76 ( -2.74%)
Amean p50-Write 1390.30 ( 0.00%) 1395.28 ( -0.36%)
Amean p95-Write 412901.57 ( 0.00%) 37737.74 ( 90.86%)
Amean p99-Write 6668722.09 ( 0.00%) 666489.04 ( 90.01%)
Amean p50-Allocation 78714.31 ( 0.00%) 86286.22 ( -9.62%)
Amean p95-Allocation 175533.51 ( 0.00%) 351812.27 (-100.42%)
Amean p99-Allocation 247003.02 ( 0.00%) 6291171.56 (-2447.00%)
Of greater concern is that the patch causes swapping and page writes
from kswapd context rose from 0 pages to 4189753 pages during the hour
the workload ran for. By and large, the patch has very bad behaviour
but easily missed as the impact on a UMA machine is negligible.
This patch is included with the data in case a bisection leads to this
area. This patch is also a pre-requisite for the rest of the series.
Link: http://lkml.kernel.org/r/20170309075657.25121-2-mgorman@techsingularity.net
Signed-off-by: Shantanu Goel <sgoel01@yahoo.com>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
GFP_NOFS context is used for the following 5 reasons currently:
- to prevent from deadlocks when the lock held by the allocation
context would be needed during the memory reclaim
- to prevent from stack overflows during the reclaim because the
allocation is performed from a deep context already
- to prevent lockups when the allocation context depends on other
reclaimers to make a forward progress indirectly
- just in case because this would be safe from the fs POV
- silence lockdep false positives
Unfortunately overuse of this allocation context brings some problems to
the MM. Memory reclaim is much weaker (especially during heavy FS
metadata workloads), OOM killer cannot be invoked because the MM layer
doesn't have enough information about how much memory is freeable by the
FS layer.
In many cases it is far from clear why the weaker context is even used
and so it might be used unnecessarily. We would like to get rid of
those as much as possible. One way to do that is to use the flag in
scopes rather than isolated cases. Such a scope is declared when really
necessary, tracked per task and all the allocation requests from within
the context will simply inherit the GFP_NOFS semantic.
Not only this is easier to understand and maintain because there are
much less problematic contexts than specific allocation requests, this
also helps code paths where FS layer interacts with other layers (e.g.
crypto, security modules, MM etc...) and there is no easy way to convey
the allocation context between the layers.
Introduce memalloc_nofs_{save,restore} API to control the scope of
GFP_NOFS allocation context. This is basically copying
memalloc_noio_{save,restore} API we have for other restricted allocation
context GFP_NOIO. The PF_MEMALLOC_NOFS flag already exists and it is
just an alias for PF_FSTRANS which has been xfs specific until recently.
There are no more PF_FSTRANS users anymore so let's just drop it.
PF_MEMALLOC_NOFS is now checked in the MM layer and drops __GFP_FS
implicitly same as PF_MEMALLOC_NOIO drops __GFP_IO. memalloc_noio_flags
is renamed to current_gfp_context because it now cares about both
PF_MEMALLOC_NOFS and PF_MEMALLOC_NOIO contexts. Xfs code paths preserve
their semantic. kmem_flags_convert() doesn't need to evaluate the flag
anymore.
This patch shouldn't introduce any functional changes.
Let's hope that filesystems will drop direct GFP_NOFS (resp. ~__GFP_FS)
usage as much as possible and only use a properly documented
memalloc_nofs_{save,restore} checkpoints where they are appropriate.
[akpm@linux-foundation.org: fix comment typo, reflow comment]
Link: http://lkml.kernel.org/r/20170306131408.9828-5-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Chris Mason <clm@fb.com>
Cc: David Sterba <dsterba@suse.cz>
Cc: Jan Kara <jack@suse.cz>
Cc: Brian Foster <bfoster@redhat.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Nikolay Borisov <nborisov@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When memory pressure is high, we free MADV_FREE pages. If the pages are
not dirty in pte, the pages could be freed immediately. Otherwise we
can't reclaim them. We put the pages back to anonumous LRU list (by
setting SwapBacked flag) and the pages will be reclaimed in normal
swapout way.
We use normal page reclaim policy. Since MADV_FREE pages are put into
inactive file list, such pages and inactive file pages are reclaimed
according to their age. This is expected, because we don't want to
reclaim too many MADV_FREE pages before used once pages.
Based on Minchan's original patch
[minchan@kernel.org: clean up lazyfree page handling]
Link: http://lkml.kernel.org/r/20170303025237.GB3503@bbox
Link: http://lkml.kernel.org/r/14b8eb1d3f6bf6cc492833f183ac8c304e560484.1487965799.git.shli@fb.com
Signed-off-by: Shaohua Li <shli@fb.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm: fix some MADV_FREE issues", v5.
We are trying to use MADV_FREE in jemalloc. Several issues are found.
Without solving the issues, jemalloc can't use the MADV_FREE feature.
- Doesn't support system without swap enabled. Because if swap is off,
we can't or can't efficiently age anonymous pages. And since
MADV_FREE pages are mixed with other anonymous pages, we can't
reclaim MADV_FREE pages. In current implementation, MADV_FREE will
fallback to MADV_DONTNEED without swap enabled. But in our
environment, a lot of machines don't enable swap. This will prevent
our setup using MADV_FREE.
- Increases memory pressure. page reclaim bias file pages reclaim
against anonymous pages. This doesn't make sense for MADV_FREE pages,
because those pages could be freed easily and refilled with very
slight penality. Even page reclaim doesn't bias file pages, there is
still an issue, because MADV_FREE pages and other anonymous pages are
mixed together. To reclaim a MADV_FREE page, we probably must scan a
lot of other anonymous pages, which is inefficient. In our test, we
usually see oom with MADV_FREE enabled and nothing without it.
- Accounting. There are two accounting problems. We don't have a global
accounting. If the system is abnormal, we don't know if it's a
problem from MADV_FREE side. The other problem is RSS accounting.
MADV_FREE pages are accounted as normal anon pages and reclaimed
lazily, so application's RSS becomes bigger. This confuses our
workloads. We have monitoring daemon running and if it finds
applications' RSS becomes abnormal, the daemon will kill the
applications even kernel can reclaim the memory easily.
To address the first the two issues, we can either put MADV_FREE pages
into a separate LRU list (Minchan's previous patches and V1 patches), or
put them into LRU_INACTIVE_FILE list (suggested by Johannes). The
patchset use the second idea. The reason is LRU_INACTIVE_FILE list is
tiny nowadays and should be full of used once file pages. So we can
still efficiently reclaim MADV_FREE pages there without interference
with other anon and active file pages. Putting the pages into inactive
file list also has an advantage which allows page reclaim to prioritize
MADV_FREE pages and used once file pages. MADV_FREE pages are put into
the lru list and clear SwapBacked flag, so PageAnon(page) &&
!PageSwapBacked(page) will indicate a MADV_FREE pages. These pages will
directly freed without pageout if they are clean, otherwise normal swap
will reclaim them.
For the third issue, the previous post adds global accounting and a
separate RSS count for MADV_FREE pages. The problem is we never get
accurate accounting for MADV_FREE pages. The pages are mapped to
userspace, can be dirtied without notice from kernel side. To get
accurate accounting, we could write protect the page, but then there is
extra page fault overhead, which people don't want to pay. Jemalloc
guys have concerns about the inaccurate accounting, so this post drops
the accounting patches temporarily. The info exported to
/proc/pid/smaps for MADV_FREE pages are kept, which is the only place we
can get accurate accounting right now.
This patch (of 6):
Johannes pointed out TTU_LZFREE is unnecessary. It's true because we
always have the flag set if we want to do an unmap. For cases we don't
do an unmap, the TTU_LZFREE part of code should never run.
Also the TTU_UNMAP is unnecessary. If no other flags set (for example,
TTU_MIGRATION), an unmap is implied.
The patch includes Johannes's cleanup and dead TTU_ACTION macro removal
code
Link: http://lkml.kernel.org/r/4be3ea1bc56b26fd98a54d0a6f70bec63f6d8980.1487965799.git.shli@fb.com
Signed-off-by: Shaohua Li <shli@fb.com>
Suggested-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit d7f05528ee.
Now that reclaimability of a node is no longer based on the ratio
between pages scanned and theoretically reclaimable pages, we can remove
accounting tricks for pages skipped due to zone constraints.
Link: http://lkml.kernel.org/r/20170228214007.5621-9-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jia He <hejianet@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
NR_PAGES_SCANNED counts number of pages scanned since the last page free
event in the allocator. This was used primarily to measure the
reclaimability of zones and nodes, and determine when reclaim should
give up on them. In that role, it has been replaced in the preceding
patches by a different mechanism.
Being implemented as an efficient vmstat counter, it was automatically
exported to userspace as well. It's however unlikely that anyone
outside the kernel is using this counter in any meaningful way.
Remove the counter and the unused pgdat_reclaimable().
Link: http://lkml.kernel.org/r/20170228214007.5621-8-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jia He <hejianet@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 246e87a939 ("memcg: fix get_scan_count() for small targets")
sought to avoid high reclaim priorities for memcg by forcing it to scan
a minimum amount of pages when lru_pages >> priority yielded nothing.
This was done at a time when reclaim decisions like dirty throttling
were tied to the priority level.
Nowadays, the only meaningful thing still tied to priority dropping
below DEF_PRIORITY - 2 is gating whether laptop_mode=1 is generally
allowed to write. But that is from an era where direct reclaim was
still allowed to call ->writepage, and kswapd nowadays avoids writes
until it's scanned every clean page in the system. Potential changes to
how quick sc->may_writepage could trigger are of little concern.
Remove the force_scan stuff, as well as the ugly multi-pass target
calculation that it necessitated.
Link: http://lkml.kernel.org/r/20170228214007.5621-7-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jia He <hejianet@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 246e87a939 ("memcg: fix get_scan_count() for small targets")
sought to avoid high reclaim priorities for kswapd by forcing it to scan
a minimum amount of pages when lru_pages >> priority yielded nothing.
Commit b95a2f2d48 ("mm: vmscan: convert global reclaim to per-memcg
LRU lists"), due to switching global reclaim to a round-robin scheme
over all cgroups, had to restrict this forceful behavior to
unreclaimable zones in order to prevent massive overreclaim with many
cgroups.
The latter patch effectively neutered the behavior completely for all
but extreme memory pressure. But in those situations we might as well
drop the reclaimers to lower priority levels. Remove the check.
Link: http://lkml.kernel.org/r/20170228214007.5621-6-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jia He <hejianet@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 1d82de618d ("mm, vmscan: make kswapd reclaim in terms of
nodes") allowed laptop_mode=1 to start writing not just when the
priority drops to DEF_PRIORITY - 2 but also when the node is
unreclaimable.
That appears to be a spurious change in this patch as I doubt the series
was tested with laptop_mode, and neither is that particular change
mentioned in the changelog. Remove it, it's still recent.
Link: http://lkml.kernel.org/r/20170228214007.5621-4-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jia He <hejianet@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
PF_MEMALLOC direct reclaimers get throttled on a node when the sum of
all free pages in each zone fall below half the min watermark. During
the summation, we want to exclude zones that don't have reclaimables.
Checking the same pgdat over and over again doesn't make sense.
Fixes: 599d0c954f ("mm, vmscan: move LRU lists to node")
Link: http://lkml.kernel.org/r/20170228214007.5621-3-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Jia He <hejianet@gmail.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm: kswapd spinning on unreclaimable nodes - fixes and
cleanups".
Jia reported a scenario in which the kswapd of a node indefinitely spins
at 100% CPU usage. We have seen similar cases at Facebook.
The kernel's current method of judging its ability to reclaim a node (or
whether to back off and sleep) is based on the amount of scanned pages
in proportion to the amount of reclaimable pages. In Jia's and our
scenarios, there are no reclaimable pages in the node, however, and the
condition for backing off is never met. Kswapd busyloops in an attempt
to restore the watermarks while having nothing to work with.
This series reworks the definition of an unreclaimable node based not on
scanning but on whether kswapd is able to actually reclaim pages in
MAX_RECLAIM_RETRIES (16) consecutive runs. This is the same criteria
the page allocator uses for giving up on direct reclaim and invoking the
OOM killer. If it cannot free any pages, kswapd will go to sleep and
leave further attempts to direct reclaim invocations, which will either
make progress and re-enable kswapd, or invoke the OOM killer.
Patch #1 fixes the immediate problem Jia reported, the remainder are
smaller fixlets, cleanups, and overall phasing out of the old method.
Patch #6 is the odd one out. It's a nice cleanup to get_scan_count(),
and directly related to #5, but in itself not relevant to the series.
If the whole series is too ambitious for 4.11, I would consider the
first three patches fixes, the rest cleanups.
This patch (of 9):
Jia He reports a problem with kswapd spinning at 100% CPU when
requesting more hugepages than memory available in the system:
$ echo 4000 >/proc/sys/vm/nr_hugepages
top - 13:42:59 up 3:37, 1 user, load average: 1.09, 1.03, 1.01
Tasks: 1 total, 1 running, 0 sleeping, 0 stopped, 0 zombie
%Cpu(s): 0.0 us, 12.5 sy, 0.0 ni, 85.5 id, 2.0 wa, 0.0 hi, 0.0 si, 0.0 st
KiB Mem: 31371520 total, 30915136 used, 456384 free, 320 buffers
KiB Swap: 6284224 total, 115712 used, 6168512 free. 48192 cached Mem
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
76 root 20 0 0 0 0 R 100.0 0.000 217:17.29 kswapd3
At that time, there are no reclaimable pages left in the node, but as
kswapd fails to restore the high watermarks it refuses to go to sleep.
Kswapd needs to back away from nodes that fail to balance. Up until
commit 1d82de618d ("mm, vmscan: make kswapd reclaim in terms of
nodes") kswapd had such a mechanism. It considered zones whose
theoretically reclaimable pages it had reclaimed six times over as
unreclaimable and backed away from them. This guard was erroneously
removed as the patch changed the definition of a balanced node.
However, simply restoring this code wouldn't help in the case reported
here: there *are* no reclaimable pages that could be scanned until the
threshold is met. Kswapd would stay awake anyway.
Introduce a new and much simpler way of backing off. If kswapd runs
through MAX_RECLAIM_RETRIES (16) cycles without reclaiming a single
page, make it back off from the node. This is the same number of shots
direct reclaim takes before declaring OOM. Kswapd will go to sleep on
that node until a direct reclaimer manages to reclaim some pages, thus
proving the node reclaimable again.
[hannes@cmpxchg.org: check kswapd failure against the cumulative nr_reclaimed count]
Link: http://lkml.kernel.org/r/20170306162410.GB2090@cmpxchg.org
[shakeelb@google.com: fix condition for throttle_direct_reclaim]
Link: http://lkml.kernel.org/r/20170314183228.20152-1-shakeelb@google.com
Link: http://lkml.kernel.org/r/20170228214007.5621-2-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Shakeel Butt <shakeelb@google.com>
Reported-by: Jia He <hejianet@gmail.com>
Tested-by: Jia He <hejianet@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Update the .c files that depend on these APIs.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Hillf Danton pointed out that since commit 1d82de618d ("mm, vmscan:
make kswapd reclaim in terms of nodes") that PGDAT_WRITEBACK is no
longer cleared.
It was not noticed as triggering it requires pages under writeback to
cycle twice through the LRU and before kswapd gets stalled.
Historically, such issues tended to occur on small machines writing
heavily to slow storage such as a USB stick.
Once kswapd stalls, direct reclaim stalls may be higher but due to the
fact that memory pressure is required, it would not be very noticable.
Michal Hocko suggested removing the flag entirely but the conservative
fix is to restore the intended PGDAT_WRITEBACK behaviour and clear the
flag when a suitable zone is balanced.
Fixes: 1d82de618d ("mm, vmscan: make kswapd reclaim in terms of nodes")
Link: http://lkml.kernel.org/r/20170203203222.gq7hk66yc36lpgtb@suse.de
Signed-off-by: Mel Gorman <mgorman@suse.de>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We noticed a performance regression when moving hadoop workloads from
3.10 kernels to 4.0 and 4.6. This is accompanied by increased pageout
activity initiated by kswapd as well as frequent bursts of allocation
stalls and direct reclaim scans. Even lowering the dirty ratios to the
equivalent of less than 1% of memory would not eliminate the issue,
suggesting that dirty pages concentrate where the scanner is looking.
This can be traced back to recent efforts of thrash avoidance. Where
3.10 would not detect refaulting pages and continuously supply clean
cache to the inactive list, a thrashing workload on 4.0+ will detect and
activate refaulting pages right away, distilling used-once pages on the
inactive list much more effectively. This is by design, and it makes
sense for clean cache. But for the most part our workload's cache
faults are refaults and its use-once cache is from streaming writes. We
end up with most of the inactive list dirty, and we don't go after the
active cache as long as we have use-once pages around.
But waiting for writes to avoid reclaiming clean cache that *might*
refault is a bad trade-off. Even if the refaults happen, reads are
faster than writes. Before getting bogged down on writeback, reclaim
should first look at *all* cache in the system, even active cache.
To accomplish this, activate pages that are dirty or under writeback
when they reach the end of the inactive LRU. The pages are marked for
immediate reclaim, meaning they'll get moved back to the inactive LRU
tail as soon as they're written back and become reclaimable. But in the
meantime, by reducing the inactive list to only immediately reclaimable
pages, we allow the scanner to deactivate and refill the inactive list
with clean cache from the active list tail to guarantee forward
progress.
[hannes@cmpxchg.org: update comment]
Link: http://lkml.kernel.org/r/20170202191957.22872-8-hannes@cmpxchg.org
Link: http://lkml.kernel.org/r/20170123181641.23938-6-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Dirty pages can easily reach the end of the LRU while there are still
clean pages to reclaim around. Don't let kswapd write them back just
because there are a lot of them. It costs more CPU to find the clean
pages, but that's almost certainly better than to disrupt writeback from
the flushers with LRU-order single-page writes from reclaim. And the
flushers have been woken up by that point, so we spend IO capacity on
flushing and CPU capacity on finding the clean cache.
Only start writing dirty pages if they have cycled around the LRU twice
now and STILL haven't been queued on the IO device. It's possible that
the dirty pages are so sparsely distributed across different bdis,
inodes, memory cgroups, that the flushers take forever to get to the
ones we want reclaimed. Once we see them twice on the LRU, we know
that's the quicker way to find them, so do LRU writeback.
Link: http://lkml.kernel.org/r/20170123181641.23938-5-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Direct reclaim has been replaced by kswapd reclaim in pretty much all
common memory pressure situations, so this code most likely doesn't
accomplish the described effect anymore. The previous patch wakes up
flushers for all reclaimers when we encounter dirty pages at the tail
end of the LRU. Remove the crufty old direct reclaim invocation.
Link: http://lkml.kernel.org/r/20170123181641.23938-4-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Memory pressure can put dirty pages at the end of the LRU without
anybody running into dirty limits. Don't start writing individual pages
from kswapd while the flushers might be asleep.
Unlike the old direct reclaim flusher wakeup (removed in the next patch)
that flushes the number of pages just scanned, this patch wakes the
flushers for all outstanding dirty pages. That seemed to perform better
in a synthetic test that pushes dirty pages to the end of the LRU and
into reclaim, because we know LRU aging outstrips writeback already, and
this way we give younger dirty pages a headstart rather than wait until
reclaim runs into them as well. It also means less plugging and risk of
exhausting the struct request pool from reclaim.
There is a concern that this will cause temporary files that used to get
dirtied and truncated before writeback to now get written to disk under
memory pressure. If this turns out to be a real problem, we'll have to
revisit this and tame the reclaim flusher wakeups.
[hannes@cmpxchg.org: mention dirty expiration as a condition]
Link: http://lkml.kernel.org/r/20170126174739.GA30636@cmpxchg.org
Link: http://lkml.kernel.org/r/20170123181641.23938-3-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "mm: vmscan: fix kswapd writeback regression".
We noticed a regression on multiple hadoop workloads when moving from
3.10 to 4.0 and 4.6, which involves kswapd getting tangled up in page
writeout, causing direct reclaim herds that also don't make progress.
I tracked it down to the thrash avoidance efforts after 3.10 that make
the kernel better at keeping use-once cache and use-many cache sorted on
the inactive and active list, with more aggressive protection of the
active list as long as there is inactive cache. Unfortunately, our
workload's use-once cache is mostly from streaming writes. Waiting for
writes to avoid potential reloads in the future is not a good tradeoff.
These patches do the following:
1. Wake the flushers when kswapd sees a lump of dirty pages. It's
possible to be below the dirty background limit and still have cache
velocity push them through the LRU. So start a-flushin'.
2. Let kswapd only write pages that have been rotated twice. This makes
sure we really tried to get all the clean pages on the inactive list
before resorting to horrible LRU-order writeback.
3. Move rotating dirty pages off the inactive list. Instead of churning
or waiting on page writeback, we'll go after clean active cache. This
might lead to thrashing, but in this state memory demand outstrips IO
speed anyway, and reads are faster than writes.
Mel backported the series to 4.10-rc5 with one minor conflict and ran a
couple of tests on it. Mix of read/write random workload didn't show
anything interesting. Write-only database didn't show much difference
in performance but there were slight reductions in IO -- probably in the
noise.
simoop did show big differences although not as big as Mel expected.
This is Chris Mason's workload that similate the VM activity of hadoop.
Mel won't go through the full details but over the samples measured
during an hour it reported
4.10.0-rc5 4.10.0-rc5
vanilla johannes-v1r1
Amean p50-Read 21346531.56 ( 0.00%) 21697513.24 ( -1.64%)
Amean p95-Read 24700518.40 ( 0.00%) 25743268.98 ( -4.22%)
Amean p99-Read 27959842.13 ( 0.00%) 28963271.11 ( -3.59%)
Amean p50-Write 1138.04 ( 0.00%) 989.82 ( 13.02%)
Amean p95-Write 1106643.48 ( 0.00%) 12104.00 ( 98.91%)
Amean p99-Write 1569213.22 ( 0.00%) 36343.38 ( 97.68%)
Amean p50-Allocation 85159.82 ( 0.00%) 79120.70 ( 7.09%)
Amean p95-Allocation 204222.58 ( 0.00%) 129018.43 ( 36.82%)
Amean p99-Allocation 278070.04 ( 0.00%) 183354.43 ( 34.06%)
Amean final-p50-Read 21266432.00 ( 0.00%) 21921792.00 ( -3.08%)
Amean final-p95-Read 24870912.00 ( 0.00%) 26116096.00 ( -5.01%)
Amean final-p99-Read 28147712.00 ( 0.00%) 29523968.00 ( -4.89%)
Amean final-p50-Write 1130.00 ( 0.00%) 977.00 ( 13.54%)
Amean final-p95-Write 1033216.00 ( 0.00%) 2980.00 ( 99.71%)
Amean final-p99-Write 1517568.00 ( 0.00%) 32672.00 ( 97.85%)
Amean final-p50-Allocation 86656.00 ( 0.00%) 78464.00 ( 9.45%)
Amean final-p95-Allocation 211712.00 ( 0.00%) 116608.00 ( 44.92%)
Amean final-p99-Allocation 287232.00 ( 0.00%) 168704.00 ( 41.27%)
The latencies are actually completely horrific in comparison to 4.4 (and
4.10-rc5 is worse than 4.9 according to historical data for reasons Mel
hasn't analysed yet).
Still, 95% of write latency (p95-write) is halved by the series and
allocation latency is way down. Direct reclaim activity is one fifth of
what it was according to vmstats. Kswapd activity is higher but this is
not necessarily surprising. Kswapd efficiency is unchanged at 99% (99%
of pages scanned were reclaimed) but direct reclaim efficiency went from
77% to 99%
In the vanilla kernel, 627MB of data was written back from reclaim
context. With the series, no data was written back. With or without
the patch, pages are being immediately reclaimed after writeback
completes. However, with the patch, only 1/8th of the pages are
reclaimed like this.
This patch (of 5):
We have an elaborate dirty/writeback throttling mechanism inside the
reclaim scanner, but for that to work the pages have to go through
shrink_page_list() and get counted for what they are. Otherwise, we
mess up the LRU order and don't match reclaim speed to writeback.
Especially during deactivation, there is never a reason to skip dirty
pages; nothing is even trying to write them out from there. Don't mess
up the LRU order for nothing, shuffle these pages along.
Link: http://lkml.kernel.org/r/20170123181641.23938-2-hannes@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit 91dcade47a.
inactive_reclaimable_pages shouldn't be needed anymore since that
get_scan_count is aware of the eligble zones ("mm, vmscan: consider
eligible zones in get_scan_count").
Link: http://lkml.kernel.org/r/20170117103702.28542-4-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Johannes Weiner <hannes@cmpchxg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
get_scan_count() considers the whole node LRU size when
- doing SCAN_FILE due to many page cache inactive pages
- calculating the number of pages to scan
In both cases this might lead to unexpected behavior especially on 32b
systems where we can expect lowmem memory pressure very often.
A large highmem zone can easily distort SCAN_FILE heuristic because
there might be only few file pages from the eligible zones on the node
lru and we would still enforce file lru scanning which can lead to
trashing while we could still scan anonymous pages.
The later use of lruvec_lru_size can be problematic as well. Especially
when there are not many pages from the eligible zones. We would have to
skip over many pages to find anything to reclaim but shrink_node_memcg
would only reduce the remaining number to scan by SWAP_CLUSTER_MAX at
maximum. Therefore we can end up going over a large LRU many times
without actually having chance to reclaim much if anything at all. The
closer we are out of memory on lowmem zone the worse the problem will
be.
Fix this by filtering out all the ineligible zones when calculating the
lru size for both paths and consider only sc->reclaim_idx zones.
The patch would need to be tweaked a bit to apply to 4.10 and older but
I will do that as soon as it hits the Linus tree in the next merge
window.
Link: http://lkml.kernel.org/r/20170117103702.28542-3-mhocko@kernel.org
Fixes: b2e18757f2 ("mm, vmscan: begin reclaiming pages on a per-node basis")
Signed-off-by: Michal Hocko <mhocko@suse.com>
Tested-by: Trevor Cordes <trevor@tecnopolis.ca>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org> [4.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
lruvec_lru_size returns the full size of the LRU list while we sometimes
need a value reduced only to eligible zones (e.g. for lowmem requests).
inactive_list_is_low is one such user. Later patches will add more of
them. Add a new parameter to lruvec_lru_size and allow it filter out
zones which are not eligible for the given context.
Link: http://lkml.kernel.org/r/20170117103702.28542-2-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
PGDEACTIVATE represents the number of pages moved from the active list
to the inactive list. At least this sounds like the original motivation
of the counter. move_active_pages_to_lru, however, counts pages which
got freed in the mean time as deactivated as well. This is a very rare
event and counting them as deactivation in itself is not harmful but it
makes the code more convoluted than necessary - we have to count both
all pages and those which are freed which is a bit confusing.
After this patch the PGDEACTIVATE should have a slightly more clear
semantic and only count those pages which are moved from the active to
the inactive list which is a plus.
Link: http://lkml.kernel.org/r/20170112211221.17636-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Suggested-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mgorman@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently we have tracepoints for both active and inactive LRU lists
reclaim but we do not have any which would tell us why we we decided to
age the active list. Without that it is quite hard to diagnose
active/inactive lists balancing. Add mm_vmscan_inactive_list_is_low
tracepoint to tell us this information.
Link: http://lkml.kernel.org/r/20170104101942.4860-8-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mm_vmscan_lru_shrink_inactive will currently report the number of
scanned and reclaimed pages. This doesn't give us an idea how the
reclaim went except for the overall effectiveness though. Export and
show other counters which will tell us why we couldn't reclaim some
pages.
- nr_dirty, nr_writeback, nr_congested and nr_immediate tells
us how many pages are blocked due to IO
- nr_activate tells us how many pages were moved to the active
list
- nr_ref_keep reports how many pages are kept on the LRU due
to references (mostly for the file pages which are about to
go for another round through the inactive list)
- nr_unmap_fail - how many pages failed to unmap
All these are rather low level so they might change in future but the
tracepoint is already implementation specific so no tools should be
depending on its stability.
Link: http://lkml.kernel.org/r/20170104101942.4860-7-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
shrink_page_list returns quite some counters back to its caller.
Extract the existing 5 into struct reclaim_stat because this makes the
code easier to follow and also allows further counters to be returned.
While we are at it, make all of them unsigned rather than unsigned long
as we do not really need full 64b for them (we never scan more than
SWAP_CLUSTER_MAX pages at once). This should reduce some stack space.
This patch shouldn't introduce any functional change.
Link: http://lkml.kernel.org/r/20170104101942.4860-6-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mm_vmscan_lru_isolate currently prints only whether the LRU we isolate
from is file or anonymous but we do not know which LRU this is.
It is useful to know whether the list is active or inactive, since we
are using the same function to isolate pages from both of them and it's
hard to distinguish otherwise.
Link: http://lkml.kernel.org/r/20170104101942.4860-5-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
mm_vmscan_lru_isolate shows the number of requested, scanned and taken
pages. This is mostly OK but on 32b systems the number of scanned pages
is quite misleading because it includes both the scanned and skipped
pages. Moreover the skipped part is scaled based on the number of taken
pages. Let's report the exact numbers without any additional logic and
add the number of skipped pages.
This should make the reported data much more easier to interpret.
Link: http://lkml.kernel.org/r/20170104101942.4860-4-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Our reclaim process has several tracepoints to tell us more about how
things are progressing. We are, however, missing a tracepoint to track
active list aging. Introduce mm_vmscan_lru_shrink_active which reports
the number of
- nr_taken is number of isolated pages from the active list
- nr_referenced pages which tells us that we are hitting referenced
pages which are deactivated. If this is a large part of the
reported nr_deactivated pages then we might be hitting into
the active list too early because they might be still part of
the working set. This might help to debug performance issues.
- nr_active pages which tells us how many pages are kept on the
active list - mostly exec file backed pages. A high number can
indicate that we might be trashing on executables.
[mhocko@suse.com: update]
Link: http://lkml.kernel.org/r/20170104135244.GJ25453@dhcp22.suse.cz
Link: http://lkml.kernel.org/r/20170104101942.4860-3-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nils Holland and Klaus Ethgen have reported unexpected OOM killer
invocations with 32b kernel starting with 4.8 kernels
kworker/u4:5 invoked oom-killer: gfp_mask=0x2400840(GFP_NOFS|__GFP_NOFAIL), nodemask=0, order=0, oom_score_adj=0
kworker/u4:5 cpuset=/ mems_allowed=0
CPU: 1 PID: 2603 Comm: kworker/u4:5 Not tainted 4.9.0-gentoo #2
[...]
Mem-Info:
active_anon:58685 inactive_anon:90 isolated_anon:0
active_file:274324 inactive_file:281962 isolated_file:0
unevictable:0 dirty:649 writeback:0 unstable:0
slab_reclaimable:40662 slab_unreclaimable:17754
mapped:7382 shmem:202 pagetables:351 bounce:0
free:206736 free_pcp:332 free_cma:0
Node 0 active_anon:234740kB inactive_anon:360kB active_file:1097296kB inactive_file:1127848kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:29528kB dirty:2596kB writeback:0kB shmem:0kB shmem_thp: 0kB shmem_pmdmapped: 184320kB anon_thp: 808kB writeback_tmp:0kB unstable:0kB pages_scanned:0 all_unreclaimable? no
DMA free:3952kB min:788kB low:984kB high:1180kB active_anon:0kB inactive_anon:0kB active_file:7316kB inactive_file:0kB unevictable:0kB writepending:96kB present:15992kB managed:15916kB mlocked:0kB slab_reclaimable:3200kB slab_unreclaimable:1408kB kernel_stack:0kB pagetables:0kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB
lowmem_reserve[]: 0 813 3474 3474
Normal free:41332kB min:41368kB low:51708kB high:62048kB active_anon:0kB inactive_anon:0kB active_file:532748kB inactive_file:44kB unevictable:0kB writepending:24kB present:897016kB managed:836248kB mlocked:0kB slab_reclaimable:159448kB slab_unreclaimable:69608kB kernel_stack:1112kB pagetables:1404kB bounce:0kB free_pcp:528kB local_pcp:340kB free_cma:0kB
lowmem_reserve[]: 0 0 21292 21292
HighMem free:781660kB min:512kB low:34356kB high:68200kB active_anon:234740kB inactive_anon:360kB active_file:557232kB inactive_file:1127804kB unevictable:0kB writepending:2592kB present:2725384kB managed:2725384kB mlocked:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB bounce:0kB free_pcp:800kB local_pcp:608kB free_cma:0kB
the oom killer is clearly pre-mature because there there is still a lot
of page cache in the zone Normal which should satisfy this lowmem
request. Further debugging has shown that the reclaim cannot make any
forward progress because the page cache is hidden in the active list
which doesn't get rotated because inactive_list_is_low is not memcg
aware.
The code simply subtracts per-zone highmem counters from the respective
memcg's lru sizes which doesn't make any sense. We can simply end up
always seeing the resulting active and inactive counts 0 and return
false. This issue is not limited to 32b kernels but in practice the
effect on systems without CONFIG_HIGHMEM would be much harder to notice
because we do not invoke the OOM killer for allocations requests
targeting < ZONE_NORMAL.
Fix the issue by tracking per zone lru page counts in mem_cgroup_per_node
and subtract per-memcg highmem counts when memcg is enabled. Introduce
helper lruvec_zone_lru_size which redirects to either zone counters or
mem_cgroup_get_zone_lru_size when appropriate.
We are losing empty LRU but non-zero lru size detection introduced by
ca707239e8 ("mm: update_lru_size warn and reset bad lru_size") because
of the inherent zone vs. node discrepancy.
Fixes: f8d1a31163 ("mm: consider whether to decivate based on eligible zones inactive ratio")
Link: http://lkml.kernel.org/r/20170104100825.3729-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Nils Holland <nholland@tisys.org>
Tested-by: Nils Holland <nholland@tisys.org>
Reported-by: Klaus Ethgen <Klaus@Ethgen.de>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Mel Gorman <mgorman@suse.de>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: <stable@vger.kernel.org> [4.8+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge updates from Andrew Morton:
- various misc bits
- most of MM (quite a lot of MM material is awaiting the merge of
linux-next dependencies)
- kasan
- printk updates
- procfs updates
- MAINTAINERS
- /lib updates
- checkpatch updates
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (123 commits)
init: reduce rootwait polling interval time to 5ms
binfmt_elf: use vmalloc() for allocation of vma_filesz
checkpatch: don't emit unified-diff error for rename-only patches
checkpatch: don't check c99 types like uint8_t under tools
checkpatch: avoid multiple line dereferences
checkpatch: don't check .pl files, improve absolute path commit log test
scripts/checkpatch.pl: fix spelling
checkpatch: don't try to get maintained status when --no-tree is given
lib/ida: document locking requirements a bit better
lib/rbtree.c: fix typo in comment of ____rb_erase_color
lib/Kconfig.debug: make CONFIG_STRICT_DEVMEM depend on CONFIG_DEVMEM
MAINTAINERS: add drm and drm/i915 irc channels
MAINTAINERS: add "C:" for URI for chat where developers hang out
MAINTAINERS: add drm and drm/i915 bug filing info
MAINTAINERS: add "B:" for URI where to file bugs
get_maintainer: look for arbitrary letter prefixes in sections
printk: add Kconfig option to set default console loglevel
printk/sound: handle more message headers
printk/btrfs: handle more message headers
printk/kdb: handle more message headers
...
Pull smp hotplug updates from Thomas Gleixner:
"This is the final round of converting the notifier mess to the state
machine. The removal of the notifiers and the related infrastructure
will happen around rc1, as there are conversions outstanding in other
trees.
The whole exercise removed about 2000 lines of code in total and in
course of the conversion several dozen bugs got fixed. The new
mechanism allows to test almost every hotplug step standalone, so
usage sites can exercise all transitions extensively.
There is more room for improvement, like integrating all the
pointlessly different architecture mechanisms of synchronizing,
setting cpus online etc into the core code"
* 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits)
tracing/rb: Init the CPU mask on allocation
soc/fsl/qbman: Convert to hotplug state machine
soc/fsl/qbman: Convert to hotplug state machine
zram: Convert to hotplug state machine
KVM/PPC/Book3S HV: Convert to hotplug state machine
arm64/cpuinfo: Convert to hotplug state machine
arm64/cpuinfo: Make hotplug notifier symmetric
mm/compaction: Convert to hotplug state machine
iommu/vt-d: Convert to hotplug state machine
mm/zswap: Convert pool to hotplug state machine
mm/zswap: Convert dst-mem to hotplug state machine
mm/zsmalloc: Convert to hotplug state machine
mm/vmstat: Convert to hotplug state machine
mm/vmstat: Avoid on each online CPU loops
mm/vmstat: Drop get_online_cpus() from init_cpu_node_state/vmstat_cpu_dead()
tracing/rb: Convert to hotplug state machine
oprofile/nmi timer: Convert to hotplug state machine
net/iucv: Use explicit clean up labels in iucv_init()
x86/pci/amd-bus: Convert to hotplug state machine
x86/oprofile/nmi: Convert to hotplug state machine
...
Our system uses significantly more slab memory with memcg enabled with
the latest kernel. With 3.10 kernel, slab uses 2G memory, while with
4.6 kernel, 6G memory is used. The shrinker has problem. Let's see we
have two memcg for one shrinker. In do_shrink_slab:
1. Check cg1. nr_deferred = 0, assume total_scan = 700. batch size
is 1024, then no memory is freed. nr_deferred = 700
2. Check cg2. nr_deferred = 700. Assume freeable = 20, then
total_scan = 10 or 40. Let's assume it's 10. No memory is freed.
nr_deferred = 10.
The deferred share of cg1 is lost in this case. kswapd will free no
memory even run above steps again and again.
The fix makes sure one memcg's deferred share isn't lost.
Link: http://lkml.kernel.org/r/2414be961b5d25892060315fbb56bb19d81d0c07.1476227351.git.shli@fb.com
Signed-off-by: Shaohua Li <shli@fb.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Vladimir Davydov <vdavydov@parallels.com>
Cc: <stable@vger.kernel.org> [4.0+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Boris Zhmurov has reported RCU stalls during the kswapd reclaim:
INFO: rcu_sched detected stalls on CPUs/tasks:
23-...: (22 ticks this GP) idle=92f/140000000000000/0 softirq=2638404/2638404 fqs=23
(detected by 4, t=6389 jiffies, g=786259, c=786258, q=42115)
Task dump for CPU 23:
kswapd1 R running task 0 148 2 0x00000008
Call Trace:
shrink_node+0xd2/0x2f0
kswapd+0x2cb/0x6a0
mem_cgroup_shrink_node+0x160/0x160
kthread+0xbd/0xe0
__switch_to+0x1fa/0x5c0
ret_from_fork+0x1f/0x40
kthread_create_on_node+0x180/0x180
a closer code inspection has shown that we might indeed miss all the
scheduling points in the reclaim path if no pages can be isolated from
the LRU list. This is a pathological case but other reports from Donald
Buczek have shown that we might indeed hit such a path:
clusterd-989 [009] .... 118023.654491: mm_vmscan_direct_reclaim_end: nr_reclaimed=193
kswapd1-86 [001] dN.. 118023.987475: mm_vmscan_lru_isolate: isolate_mode=0 classzone=0 order=0 nr_requested=32 nr_scanned=4239830 nr_taken=0 file=1
kswapd1-86 [001] dN.. 118024.320968: mm_vmscan_lru_isolate: isolate_mode=0 classzone=0 order=0 nr_requested=32 nr_scanned=4239844 nr_taken=0 file=1
kswapd1-86 [001] dN.. 118024.654375: mm_vmscan_lru_isolate: isolate_mode=0 classzone=0 order=0 nr_requested=32 nr_scanned=4239858 nr_taken=0 file=1
kswapd1-86 [001] dN.. 118024.987036: mm_vmscan_lru_isolate: isolate_mode=0 classzone=0 order=0 nr_requested=32 nr_scanned=4239872 nr_taken=0 file=1
kswapd1-86 [001] dN.. 118025.319651: mm_vmscan_lru_isolate: isolate_mode=0 classzone=0 order=0 nr_requested=32 nr_scanned=4239886 nr_taken=0 file=1
kswapd1-86 [001] dN.. 118025.652248: mm_vmscan_lru_isolate: isolate_mode=0 classzone=0 order=0 nr_requested=32 nr_scanned=4239900 nr_taken=0 file=1
kswapd1-86 [001] dN.. 118025.984870: mm_vmscan_lru_isolate: isolate_mode=0 classzone=0 order=0 nr_requested=32 nr_scanned=4239914 nr_taken=0 file=1
[...]
kswapd1-86 [001] dN.. 118084.274403: mm_vmscan_lru_isolate: isolate_mode=0 classzone=0 order=0 nr_requested=32 nr_scanned=4241133 nr_taken=0 file=1
this is minute long snapshot which didn't take a single page from the
LRU. It is not entirely clear why only 1303 pages have been scanned
during that time (maybe there was a heavy IRQ activity interfering).
In any case it looks like we can really hit long periods without
scheduling on non preemptive kernels so an explicit cond_resched() in
shrink_node_memcg which is independent on the reclaim operation is due.
Link: http://lkml.kernel.org/r/20161202095841.16648-1-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Boris Zhmurov <bb@kernelpanic.ru>
Tested-by: Boris Zhmurov <bb@kernelpanic.ru>
Reported-by: Donald Buczek <buczek@molgen.mpg.de>
Reported-by: "Christopher S. Aker" <caker@theshore.net>
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
On 4.0, we saw a stack corruption from a page fault entering direct
memory cgroup reclaim, calling into btrfs_releasepage(), which then
tried to allocate an extent and recursed back into a kmem charge ad
nauseam:
[...]
btrfs_releasepage+0x2c/0x30
try_to_release_page+0x32/0x50
shrink_page_list+0x6da/0x7a0
shrink_inactive_list+0x1e5/0x510
shrink_lruvec+0x605/0x7f0
shrink_zone+0xee/0x320
do_try_to_free_pages+0x174/0x440
try_to_free_mem_cgroup_pages+0xa7/0x130
try_charge+0x17b/0x830
memcg_charge_kmem+0x40/0x80
new_slab+0x2d9/0x5a0
__slab_alloc+0x2fd/0x44f
kmem_cache_alloc+0x193/0x1e0
alloc_extent_state+0x21/0xc0
__clear_extent_bit+0x2b5/0x400
try_release_extent_mapping+0x1a3/0x220
__btrfs_releasepage+0x31/0x70
btrfs_releasepage+0x2c/0x30
try_to_release_page+0x32/0x50
shrink_page_list+0x6da/0x7a0
shrink_inactive_list+0x1e5/0x510
shrink_lruvec+0x605/0x7f0
shrink_zone+0xee/0x320
do_try_to_free_pages+0x174/0x440
try_to_free_mem_cgroup_pages+0xa7/0x130
try_charge+0x17b/0x830
mem_cgroup_try_charge+0x65/0x1c0
handle_mm_fault+0x117f/0x1510
__do_page_fault+0x177/0x420
do_page_fault+0xc/0x10
page_fault+0x22/0x30
On later kernels, kmem charging is opt-in rather than opt-out, and that
particular kmem allocation in btrfs_releasepage() is no longer being
charged and won't recurse and overrun the stack anymore.
But it's not impossible for an accounted allocation to happen from the
memcg direct reclaim context, and we needed to reproduce this crash many
times before we even got a useful stack trace out of it.
Like other direct reclaimers, mark tasks in memcg reclaim PF_MEMALLOC to
avoid recursing into any other form of direct reclaim. Then let
recursive charges from PF_MEMALLOC contexts bypass the cgroup limit.
Link: http://lkml.kernel.org/r/20161025141050.GA13019@cmpxchg.org
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Vladimir Davydov <vdavydov.dev@gmail.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use the existing enums instead of hardcoded index when looking at the
zonelist. This makes it more readable. No functionality change by this
patch.
Link: http://lkml.kernel.org/r/1472227078-24852-1-git-send-email-aneesh.kumar@linux.vnet.ibm.com
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Reviewed-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
throttle_vm_writeout() was introduced back in 2005 to fix OOMs caused by
excessive pageout activity during the reclaim. Too many pages could be
put under writeback therefore LRUs would be full of unreclaimable pages
until the IO completes and in turn the OOM killer could be invoked.
There have been some important changes introduced since then in the
reclaim path though. Writers are throttled by balance_dirty_pages when
initiating the buffered IO and later during the memory pressure, the
direct reclaim is throttled by wait_iff_congested if the node is
considered congested by dirty pages on LRUs and the underlying bdi is
congested by the queued IO. The kswapd is throttled as well if it
encounters pages marked for immediate reclaim or under writeback which
signals that that there are too many pages under writeback already.
Finally should_reclaim_retry does congestion_wait if the reclaim cannot
make any progress and there are too many dirty/writeback pages.
Another important aspect is that we do not issue any IO from the direct
reclaim context anymore. In a heavy parallel load this could queue a
lot of IO which would be very scattered and thus unefficient which would
just make the problem worse.
This three mechanisms should throttle and keep the amount of IO in a
steady state even under heavy IO and memory pressure so yet another
throttling point doesn't really seem helpful. Quite contrary, Mikulas
Patocka has reported that swap backed by dm-crypt doesn't work properly
because the swapout IO cannot make sufficient progress as the writeout
path depends on dm_crypt worker which has to allocate memory to perform
the encryption. In order to guarantee a forward progress it relies on
the mempool allocator. mempool_alloc(), however, prefers to use the
underlying (usually page) allocator before it grabs objects from the
pool. Such an allocation can dive into the memory reclaim and
consequently to throttle_vm_writeout. If there are too many dirty or
pages under writeback it will get throttled even though it is in fact a
flusher to clear pending pages.
kworker/u4:0 D ffff88003df7f438 10488 6 2 0x00000000
Workqueue: kcryptd kcryptd_crypt [dm_crypt]
Call Trace:
schedule+0x3c/0x90
schedule_timeout+0x1d8/0x360
io_schedule_timeout+0xa4/0x110
congestion_wait+0x86/0x1f0
throttle_vm_writeout+0x44/0xd0
shrink_zone_memcg+0x613/0x720
shrink_zone+0xe0/0x300
do_try_to_free_pages+0x1ad/0x450
try_to_free_pages+0xef/0x300
__alloc_pages_nodemask+0x879/0x1210
alloc_pages_current+0xa1/0x1f0
new_slab+0x2d7/0x6a0
___slab_alloc+0x3fb/0x5c0
__slab_alloc+0x51/0x90
kmem_cache_alloc+0x27b/0x310
mempool_alloc_slab+0x1d/0x30
mempool_alloc+0x91/0x230
bio_alloc_bioset+0xbd/0x260
kcryptd_crypt+0x114/0x3b0 [dm_crypt]
Let's just drop throttle_vm_writeout altogether. It is not very much
helpful anymore.
I have tried to test a potential writeback IO runaway similar to the one
described in the original patch which has introduced that [1]. Small
virtual machine (512MB RAM, 4 CPUs, 2G of swap space and disk image on a
rather slow NFS in a sync mode on the host) with 8 parallel writers each
writing 1G worth of data. As soon as the pagecache fills up and the
direct reclaim hits then I start anon memory consumer in a loop
(allocating 300M and exiting after populating it) in the background to
make the memory pressure even stronger as well as to disrupt the steady
state for the IO. The direct reclaim is throttled because of the
congestion as well as kswapd hitting congestion_wait due to nr_immediate
but throttle_vm_writeout doesn't ever trigger the sleep throughout the
test. Dirty+writeback are close to nr_dirty_threshold with some
fluctuations caused by the anon consumer.
[1] https://www2.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.9-rc1/2.6.9-rc1-mm3/broken-out/vm-pageout-throttling.patch
Link: http://lkml.kernel.org/r/1471171473-21418-1-git-send-email-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: NeilBrown <neilb@suse.com>
Cc: Ondrej Kozina <okozina@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The compaction_ready() is used during direct reclaim for costly order
allocations to skip reclaim for zones where compaction should be
attempted instead. It's combining the standard compaction_suitable()
check with its own watermark check based on high watermark with extra
gap, and the result is confusing at best.
This patch attempts to better structure and document the checks
involved. First, compaction_suitable() can determine that the
allocation should either succeed already, or that compaction doesn't
have enough free pages to proceed. The third possibility is that
compaction has enough free pages, but we still decide to reclaim first -
unless we are already above the high watermark with gap. This does not
mean that the reclaim will actually reach this watermark during single
attempt, this is rather an over-reclaim protection. So document the
code as such. The check for compaction_deferred() is removed
completely, as it in fact had no proper role here.
The result after this patch is mainly a less confusing code. We also
skip some over-reclaim in cases where the allocation should already
succed.
Link: http://lkml.kernel.org/r/20160810091226.6709-12-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Compaction uses a watermark gap of (2UL << order) pages at various
places and it's not immediately obvious why. Abstract it through a
compact_gap() wrapper to create a single place with a thorough
explanation.
[vbabka@suse.cz: clarify the comment of compact_gap()]
Link: http://lkml.kernel.org/r/7b6aed1f-fdf8-2063-9ff4-bbe4de712d37@suse.cz
Link: http://lkml.kernel.org/r/20160810091226.6709-9-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
COMPACT_PARTIAL has historically meant that compaction returned after
doing some work without fully compacting a zone. It however didn't
distinguish if compaction terminated because it succeeded in creating
the requested high-order page. This has changed recently and now we
only return COMPACT_PARTIAL when compaction thinks it succeeded, or the
high-order watermark check in compaction_suitable() passes and no
compaction needs to be done.
So at this point we can make the return value clearer by renaming it to
COMPACT_SUCCESS. The next patch will remove some redundant tests for
success where compaction just returned COMPACT_SUCCESS.
Link: http://lkml.kernel.org/r/20160810091226.6709-4-vbabka@suse.cz
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Tested-by: Lorenzo Stoakes <lstoakes@gmail.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
init_tlb_ubc() looked unnecessary to me: tlb_ubc is statically
initialized with zeroes in the init_task, and copied from parent to
child while it is quiescent in arch_dup_task_struct(); so I went to
delete it.
But inserted temporary debug WARN_ONs in place of init_tlb_ubc() to
check that it was always empty at that point, and found them firing:
because memcg reclaim can recurse into global reclaim (when allocating
biosets for swapout in my case), and arrive back at the init_tlb_ubc()
in shrink_node_memcg().
Resetting tlb_ubc.flush_required at that point is wrong: if the upper
level needs a deferred TLB flush, but the lower level turns out not to,
we miss a TLB flush. But fortunately, that's the only part of the
protocol that does not nest: with the initialization removed, cpumask
collects bits from upper and lower levels, and flushes TLB when needed.
Fixes: 72b252aed5 ("mm: send one IPI per CPU to TLB flush all entries after unmapping pages")
Signed-off-by: Hugh Dickins <hughd@google.com>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: stable@vger.kernel.org # 4.3+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Firmware Assisted Dump (FA_DUMP) on ppc64 reserves substantial amounts
of memory when booting a secondary kernel. Srikar Dronamraju reported
that multiple nodes may have no memory managed by the buddy allocator
but still return true for populated_zone().
Commit 1d82de618d ("mm, vmscan: make kswapd reclaim in terms of
nodes") was reported to cause kswapd to spin at 100% CPU usage when
fadump was enabled. The old code happened to deal with the situation of
a populated node with zero free pages by co-incidence but the current
code tries to reclaim populated zones without realising that is
impossible.
We cannot just convert populated_zone() as many existing users really
need to check for present_pages. This patch introduces a managed_zone()
helper and uses it in the few cases where it is critical that the check
is made for managed pages -- zonelist construction and page reclaim.
Link: http://lkml.kernel.org/r/20160831195104.GB8119@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reported-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Tested-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We must call shrink_slab() for each memory cgroup on both global and
memcg reclaim in shrink_node_memcg(). Commit d71df22b55099 accidentally
changed that so that now shrink_slab() is only called with memcg != NULL
on memcg reclaim. As a result, memcg-aware shrinkers (including
dentry/inode) are never invoked on global reclaim. Fix that.
Fixes: b2e18757f2 ("mm, vmscan: begin reclaiming pages on a per-node basis")
Link: http://lkml.kernel.org/r/1470056590-7177-1-git-send-email-vdavydov@virtuozzo.com
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With node-lru, if there are enough reclaimable pages in highmem but
nothing in lowmem, VM can try to shrink inactive list although the
requested zone is lowmem.
The problem is that if the inactive list is full of highmem pages then a
direct reclaimer searching for a lowmem page waste CPU scanning
uselessly. It just burns out CPU. Even, many direct reclaimers are
stalled by too_many_isolated if lots of parallel reclaimer are going on
although there are no reclaimable memory in inactive list.
I tried the experiment 4 times in 32bit 2G 8 CPU KVM machine to get
elapsed time.
hackbench 500 process 2
= Old =
1st: 289s 2nd: 310s 3rd: 112s 4th: 272s
= Now =
1st: 31s 2nd: 132s 3rd: 162s 4th: 50s.
[akpm@linux-foundation.org: fixes per Mel]
Link: http://lkml.kernel.org/r/1469433119-1543-1-git-send-email-minchan@kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Page reclaim determines whether a pgdat is unreclaimable by examining
how many pages have been scanned since a page was freed and comparing
that to the LRU sizes. Skipped pages are not reclaim candidates but
contribute to scanned. This can prematurely mark a pgdat as
unreclaimable and trigger an OOM kill.
This patch accounts for skipped pages as a partial scan so that an
unreclaimable pgdat will still be marked as such but by scaling the cost
of a skip, it'll avoid the pgdat being marked prematurely.
Link: http://lkml.kernel.org/r/1469110261-7365-6-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Minchan Kim reported that with per-zone lru state it was possible to
identify that a normal zone with 8^M anonymous pages could trigger OOM
with non-atomic order-0 allocations as all pages in the zone were in the
active list.
gfp_mask=0x26004c0(GFP_KERNEL|__GFP_REPEAT|__GFP_NOTRACK), order=0
Call Trace:
__alloc_pages_nodemask+0xe52/0xe60
? new_slab+0x39c/0x3b0
new_slab+0x39c/0x3b0
___slab_alloc.constprop.87+0x6da/0x840
? __alloc_skb+0x3c/0x260
? enqueue_task_fair+0x73/0xbf0
? poll_select_copy_remaining+0x140/0x140
__slab_alloc.isra.81.constprop.86+0x40/0x6d
? __alloc_skb+0x3c/0x260
kmem_cache_alloc+0x22c/0x260
? __alloc_skb+0x3c/0x260
__alloc_skb+0x3c/0x260
alloc_skb_with_frags+0x4e/0x1a0
sock_alloc_send_pskb+0x16a/0x1b0
? wait_for_unix_gc+0x31/0x90
unix_stream_sendmsg+0x28d/0x340
sock_sendmsg+0x2d/0x40
sock_write_iter+0x6c/0xc0
__vfs_write+0xc0/0x120
vfs_write+0x9b/0x1a0
? __might_fault+0x49/0xa0
SyS_write+0x44/0x90
do_fast_syscall_32+0xa6/0x1e0
Mem-Info:
active_anon:101103 inactive_anon:102219 isolated_anon:0
active_file:503 inactive_file:544 isolated_file:0
unevictable:0 dirty:0 writeback:34 unstable:0
slab_reclaimable:6298 slab_unreclaimable:74669
mapped:863 shmem:0 pagetables:100998 bounce:0
free:23573 free_pcp:1861 free_cma:0
Node 0 active_anon:404412kB inactive_anon:409040kB active_file:2012kB inactive_file:2176kB unevictable:0kB isolated(anon):0kB isolated(file):0kB mapped:3452kB dirty:0kB writeback:136kB shmem:0kB writeback_tmp:0kB unstable:0kB pages_scanned:1320845 all_unreclaimable? yes
DMA free:3296kB min:68kB low:84kB high:100kB active_anon:5540kB inactive_anon:0kB active_file:0kB inactive_file:0kB present:15992kB managed:15916kB mlocked:0kB slab_reclaimable:248kB slab_unreclaimable:2628kB kernel_stack:792kB pagetables:2316kB bounce:0kB free_pcp:0kB local_pcp:0kB free_cma:0kB
lowmem_reserve[]: 0 809 1965 1965
Normal free:3600kB min:3604kB low:4504kB high:5404kB active_anon:86304kB inactive_anon:0kB active_file:160kB inactive_file:376kB present:897016kB managed:858524kB mlocked:0kB slab_reclaimable:24944kB slab_unreclaimable:296048kB kernel_stack:163832kB pagetables:35892kB bounce:0kB free_pcp:3076kB local_pcp:656kB free_cma:0kB
lowmem_reserve[]: 0 0 9247 9247
HighMem free:86156kB min:512kB low:1796kB high:3080kB active_anon:312852kB inactive_anon:410024kB active_file:1924kB inactive_file:2012kB present:1183736kB managed:1183736kB mlocked:0kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:365784kB bounce:0kB free_pcp:3868kB local_pcp:720kB free_cma:0kB
lowmem_reserve[]: 0 0 0 0
DMA: 8*4kB (UM) 8*8kB (UM) 4*16kB (M) 2*32kB (UM) 2*64kB (UM) 1*128kB (M) 3*256kB (UME) 2*512kB (UE) 1*1024kB (E) 0*2048kB 0*4096kB = 3296kB
Normal: 240*4kB (UME) 160*8kB (UME) 23*16kB (ME) 3*32kB (UE) 3*64kB (UME) 2*128kB (ME) 1*256kB (U) 0*512kB 0*1024kB 0*2048kB 0*4096kB = 3408kB
HighMem: 10942*4kB (UM) 3102*8kB (UM) 866*16kB (UM) 76*32kB (UM) 11*64kB (UM) 4*128kB (UM) 1*256kB (M) 0*512kB 0*1024kB 0*2048kB 0*4096kB = 86344kB
Node 0 hugepages_total=0 hugepages_free=0 hugepages_surp=0 hugepages_size=2048kB
54409 total pagecache pages
53215 pages in swap cache
Swap cache stats: add 300982, delete 247765, find 157978/226539
Free swap = 3803244kB
Total swap = 4192252kB
524186 pages RAM
295934 pages HighMem/MovableOnly
9642 pages reserved
0 pages cma reserved
The problem is due to the active deactivation logic in
inactive_list_is_low:
Node 0 active_anon:404412kB inactive_anon:409040kB
IOW, (inactive_anon of node * inactive_ratio > active_anon of node) due
to highmem anonymous stat so VM never deactivates normal zone's
anonymous pages.
This patch is a modified version of Minchan's original solution but
based upon it. The problem with Minchan's patch is that any low zone
with an imbalanced list could force a rotation.
In this patch, a zone-constrained global reclaim will rotate the list if
the inactive/active ratio of all eligible zones needs to be corrected.
It is possible that higher zone pages will be initially rotated
prematurely but this is the safer choice to maintain overall LRU age.
Link: http://lkml.kernel.org/r/20160722090929.GJ10438@techsingularity.net
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If per-zone LRU accounting is available then there is no point
approximating whether reclaim and compaction should retry based on pgdat
statistics. This is effectively a revert of "mm, vmstat: remove zone
and node double accounting by approximating retries" with the difference
that inactive/active stats are still available. This preserves the
history of why the approximation was retried and why it had to be
reverted to handle OOM kills on 32-bit systems.
Link: http://lkml.kernel.org/r/1469110261-7365-4-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With node-lru, the locking is based on the pgdat. As Minchan pointed
out, there is an opportunity to reduce LRU lock release/acquire in
check_move_unevictable_pages by only changing lock on a pgdat change.
[mgorman@techsingularity.net: remove double initialisation]
Link: http://lkml.kernel.org/r/20160719074835.GC10438@techsingularity.net
Link: http://lkml.kernel.org/r/1468853426-12858-3-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As pointed out by Minchan Kim, shrink_zones() checks for populated zones
in a zonelist but a zonelist can never contain unpopulated zones. While
it's not related to the node-lru series, it can be cleaned up now.
Link: http://lkml.kernel.org/r/1468853426-12858-2-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Suggested-by: Minchan Kim <minchan@kernel.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Minchan Kim reported setting the following warning on a 32-bit system
although it can affect 64-bit systems.
WARNING: CPU: 4 PID: 1322 at mm/memcontrol.c:998 mem_cgroup_update_lru_size+0x103/0x110
mem_cgroup_update_lru_size(f44b4000, 1, -7): zid 1 lru_size 1 but empty
Modules linked in:
CPU: 4 PID: 1322 Comm: cp Not tainted 4.7.0-rc4-mm1+ #143
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011
Call Trace:
dump_stack+0x76/0xaf
__warn+0xea/0x110
? mem_cgroup_update_lru_size+0x103/0x110
warn_slowpath_fmt+0x3b/0x40
mem_cgroup_update_lru_size+0x103/0x110
isolate_lru_pages.isra.61+0x2e2/0x360
shrink_active_list+0xac/0x2a0
? __delay+0xe/0x10
shrink_node_memcg+0x53c/0x7a0
shrink_node+0xab/0x2a0
do_try_to_free_pages+0xc6/0x390
try_to_free_pages+0x245/0x590
LRU list contents and counts are updated separately. Counts are updated
before pages are added to the LRU and updated after pages are removed.
The warning above is from a check in mem_cgroup_update_lru_size that
ensures that list sizes of zero are empty.
The problem is that node-lru needs to account for highmem pages if
CONFIG_HIGHMEM is set. One impact of the implementation is that the
sizes are updated in multiple passes when pages from multiple zones were
isolated. This happens whether HIGHMEM is set or not. When multiple
zones are isolated, it's possible for a debugging check in memcg to be
tripped.
This patch forces all the zone counts to be updated before the memcg
function is called.
Link: http://lkml.kernel.org/r/1468588165-12461-6-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Tested-by: Minchan Kim <minchan@kernel.org>
Reported-by: Minchan Kim <minchan@kernel.org>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The number of LRU pages, dirty pages and writeback pages must be
accounted for on both zones and nodes because of the reclaim retry
logic, compaction retry logic and highmem calculations all depending on
per-zone stats.
Many lowmem allocations are immune from OOM kill due to a check in
__alloc_pages_may_oom for (ac->high_zoneidx < ZONE_NORMAL) since commit
03668b3ceb ("oom: avoid oom killer for lowmem allocations"). The
exception is costly high-order allocations or allocations that cannot
fail. If the __alloc_pages_may_oom avoids OOM-kill for low-order lowmem
allocations then it would fall through to __alloc_pages_direct_compact.
This patch will blindly retry reclaim for zone-constrained allocations
in should_reclaim_retry up to MAX_RECLAIM_RETRIES. This is not ideal
but without per-zone stats there are not many alternatives. The impact
it that zone-constrained allocations may delay before considering the
OOM killer.
As there is no guarantee enough memory can ever be freed to satisfy
compaction, this patch avoids retrying compaction for zone-contrained
allocations.
In combination, that means that the per-node stats can be used when
deciding whether to continue reclaim using a rough approximation. While
it is possible this will make the wrong decision on occasion, it will
not infinite loop as the number of reclaim attempts is capped by
MAX_RECLAIM_RETRIES.
The final step is calculating the number of dirtyable highmem pages. As
those calculations only care about the global count of file pages in
highmem. This patch uses a global counter used instead of per-zone
stats as it is sufficient.
In combination, this allows the per-zone LRU and dirty state counters to
be removed.
[mgorman@techsingularity.net: fix acct_highmem_file_pages()]
Link: http://lkml.kernel.org/r/1468853426-12858-4-git-send-email-mgorman@techsingularity.netLink: http://lkml.kernel.org/r/1467970510-21195-35-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Suggested by: Michal Hocko <mhocko@kernel.org>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The vmstat allocstall was fairly useful in the general sense but
node-based LRUs change that. It's important to know if a stall was for
an address-limited allocation request as this will require skipping
pages from other zones. This patch adds pgstall_* counters to replace
allocstall. The sum of the counters will equal the old allocstall so it
can be trivially recalculated. A high number of address-limited
allocation requests may result in a lot of useless LRU scanning for
suitable pages.
As address-limited allocations require pages to be skipped, it's
important to know how much useless LRU scanning took place so this patch
adds pgskip* counters. This yields the following model
1. The number of address-space limited stalls can be accounted for (pgstall)
2. The amount of useless work required to reclaim the data is accounted (pgskip)
3. The total number of scans is available from pgscan_kswapd and pgscan_direct
so from that the ratio of useful to useless scans can be calculated.
[mgorman@techsingularity.net: s/pgstall/allocstall/]
Link: http://lkml.kernel.org/r/1468404004-5085-3-git-send-email-mgorman@techsingularity.netLink: http://lkml.kernel.org/r/1467970510-21195-33-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is convenient when tracking down why the skip count is high because
it'll show what classzone kswapd woke up at and what zones are being
isolated.
Link: http://lkml.kernel.org/r/1467970510-21195-29-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The buffer_heads_over_limit limit in kswapd is inconsistent with direct
reclaim behaviour. It may force an an attempt to reclaim from all zones
and then not reclaim at all because higher zones were balanced than
required by the original request.
This patch will causes kswapd to consider reclaiming from all zones if
buffer_heads_over_limit. However, if there are eligible zones for the
allocation request that woke kswapd then no reclaim will occur even if
buffer_heads_over_limit. This avoids kswapd over-reclaiming just
because buffer_heads_over_limit.
[mgorman@techsingularity.net: fix comment about buffer_heads_over_limit]
Link: http://lkml.kernel.org/r/1468404004-5085-2-git-send-email-mgorman@techsingularity.net
Link: http://lkml.kernel.org/r/1467970510-21195-28-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As pointed out by Minchan Kim, the first call to prepare_kswapd_sleep()
always passes in 0 for `remaining' and the second call can trivially
check the parameter in advance.
Suggested-by: Minchan Kim <minchan@kernel.org>
Link: http://lkml.kernel.org/r/1467970510-21195-27-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The scan_control structure has enough information available for
compaction_ready() to make a decision. The classzone_idx manipulations
in shrink_zones() are no longer necessary as the highest populated zone
is no longer used to determine if shrink_slab should be called or not.
[mgorman@techsingularity.net remove redundant check in shrink_zones()]
Link: http://lkml.kernel.org/r/1468588165-12461-3-git-send-email-mgorman@techsingularity.net
Link: http://lkml.kernel.org/r/1467970510-21195-26-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
shrink_node receives all information it needs about classzone_idx from
sc->reclaim_idx so remove the aliases.
Link: http://lkml.kernel.org/r/1467970510-21195-25-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As reclaim is now per-node based, convert zone_reclaim to be
node_reclaim. It is possible that a node will be reclaimed multiple
times if it has multiple zones but this is unavoidable without caching
all nodes traversed so far. The documentation and interface to
userspace is the same from a configuration perspective and will will be
similar in behaviour unless the node-local allocation requests were also
limited to lower zones.
Link: http://lkml.kernel.org/r/1467970510-21195-24-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kswapd is woken when zones are below the low watermark but the wakeup
decision is not taking the classzone into account. Now that reclaim is
node-based, it is only required to wake kswapd once per node and only if
all zones are unbalanced for the requested classzone.
Note that one node might be checked multiple times if the zonelist is
ordered by node because there is no cheap way of tracking what nodes
have already been visited. For zone-ordering, each node should be
checked only once.
Link: http://lkml.kernel.org/r/1467970510-21195-22-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
As reclaim is now node-based, it follows that page write activity due to
page reclaim should also be accounted for on the node. For consistency,
also account page writes and page dirtying on a per-node basis.
After this patch, there are a few remaining zone counters that may appear
strange but are fine. NUMA stats are still per-zone as this is a
user-space interface that tools consume. NR_MLOCK, NR_SLAB_*,
NR_PAGETABLE, NR_KERNEL_STACK and NR_BOUNCE are all allocations that
potentially pin low memory and cannot trivially be reclaimed on demand.
This information is still useful for debugging a page allocation failure
warning.
Link: http://lkml.kernel.org/r/1467970510-21195-21-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are now a number of accounting oddities such as mapped file pages
being accounted for on the node while the total number of file pages are
accounted on the zone. This can be coped with to some extent but it's
confusing so this patch moves the relevant file-based accounted. Due to
throttling logic in the page allocator for reliable OOM detection, it is
still necessary to track dirty and writeback pages on a per-zone basis.
[mgorman@techsingularity.net: fix NR_ZONE_WRITE_PENDING accounting]
Link: http://lkml.kernel.org/r/1468404004-5085-5-git-send-email-mgorman@techsingularity.net
Link: http://lkml.kernel.org/r/1467970510-21195-20-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reclaim makes decisions based on the number of pages that are mapped but
it's mixing node and zone information. Account NR_FILE_MAPPED and
NR_ANON_PAGES pages on the node.
Link: http://lkml.kernel.org/r/1467970510-21195-18-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Memcg needs adjustment after moving LRUs to the node. Limits are
tracked per memcg but the soft-limit excess is tracked per zone. As
global page reclaim is based on the node, it is easy to imagine a
situation where a zone soft limit is exceeded even though the memcg
limit is fine.
This patch moves the soft limit tree the node. Technically, all the
variable names should also change but people are already familiar by the
meaning of "mz" even if "mn" would be a more appropriate name now.
Link: http://lkml.kernel.org/r/1467970510-21195-15-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Michal Hocko <mhocko@suse.com>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Earlier patches focused on having direct reclaim and kswapd use data
that is node-centric for reclaiming but shrink_node() itself still uses
too much zone information. This patch removes unnecessary zone-based
information with the most important decision being whether to continue
reclaim or not. Some memcg APIs are adjusted as a result even though
memcg itself still uses some zone information.
[mgorman@techsingularity.net: optimization]
Link: http://lkml.kernel.org/r/1468588165-12461-2-git-send-email-mgorman@techsingularity.net
Link: http://lkml.kernel.org/r/1467970510-21195-14-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kswapd scans from highest to lowest for a zone that requires balancing.
This was necessary when reclaim was per-zone to fairly age pages on
lower zones. Now that we are reclaiming on a per-node basis, any
eligible zone can be used and pages will still be aged fairly. This
patch avoids reclaiming excessively unless buffer_heads are over the
limit and it's necessary to reclaim from a higher zone than requested by
the waker of kswapd to relieve low memory pressure.
[hillf.zj@alibaba-inc.com: Force kswapd reclaim no more than needed]
Link: http://lkml.kernel.org/r/1466518566-30034-12-git-send-email-mgorman@techsingularity.net
Link: http://lkml.kernel.org/r/1467970510-21195-13-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Reclaim may stall if there is too much dirty or congested data on a
node. This was previously based on zone flags and the logic for
clearing the flags is in two places. As congestion/dirty tracking is
now tracked on a per-node basis, we can remove some duplicate logic.
Link: http://lkml.kernel.org/r/1467970510-21195-12-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Direct reclaim iterates over all zones in the zonelist and shrinking
them but this is in conflict with node-based reclaim. In the default
case, only shrink once per node.
Link: http://lkml.kernel.org/r/1467970510-21195-11-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kswapd goes through some complex steps trying to figure out if it should
stay awake based on the classzone_idx and the requested order. It is
unnecessarily complex and passes in an invalid classzone_idx to
balance_pgdat(). What matters most of all is whether a larger order has
been requsted and whether kswapd successfully reclaimed at the previous
order. This patch irons out the logic to check just that and the end
result is less headache inducing.
Link: http://lkml.kernel.org/r/1467970510-21195-10-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The balance gap was introduced to apply equal pressure to all zones when
reclaiming for a higher zone. With node-based LRU, the need for the
balance gap is removed and the code is dead so remove it.
[vbabka@suse.cz: Also remove KSWAPD_ZONE_BALANCE_GAP_RATIO]
Link: http://lkml.kernel.org/r/1467970510-21195-9-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch "mm: vmscan: Begin reclaiming pages on a per-node basis" started
thinking of reclaim in terms of nodes but kswapd is still zone-centric.
This patch gets rid of many of the node-based versus zone-based
decisions.
o A node is considered balanced when any eligible lower zone is balanced.
This eliminates one class of age-inversion problem because we avoid
reclaiming a newer page just because it's in the wrong zone
o pgdat_balanced disappears because we now only care about one zone being
balanced.
o Some anomalies related to writeback and congestion tracking being based on
zones disappear.
o kswapd no longer has to take care to reclaim zones in the reverse order
that the page allocator uses.
o Most importantly of all, reclaim from node 0 with multiple zones will
have similar aging and reclaiming characteristics as every
other node.
Link: http://lkml.kernel.org/r/1467970510-21195-8-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
kswapd checks all eligible zones to see if they need balancing even if
it was woken for a lower zone. This made sense when we reclaimed on a
per-zone basis because we wanted to shrink zones fairly so avoid
age-inversion problems. Ideally this is completely unnecessary when
reclaiming on a per-node basis. In theory, there may still be anomalies
when all requests are for lower zones and very old pages are preserved
in higher zones but this should be the exceptional case.
Link: http://lkml.kernel.org/r/1467970510-21195-7-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch makes reclaim decisions on a per-node basis. A reclaimer
knows what zone is required by the allocation request and skips pages
from higher zones. In many cases this will be ok because it's a
GFP_HIGHMEM request of some description. On 64-bit, ZONE_DMA32 requests
will cause some problems but 32-bit devices on 64-bit platforms are
increasingly rare. Historically it would have been a major problem on
32-bit with big Highmem:Lowmem ratios but such configurations are also
now rare and even where they exist, they are not encouraged. If it
really becomes a problem, it'll manifest as very low reclaim
efficiencies.
Link: http://lkml.kernel.org/r/1467970510-21195-6-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This moves the LRU lists from the zone to the node and related data such
as counters, tracing, congestion tracking and writeback tracking.
Unfortunately, due to reclaim and compaction retry logic, it is
necessary to account for the number of LRU pages on both zone and node
logic. Most reclaim logic is based on the node counters but the retry
logic uses the zone counters which do not distinguish inactive and
active sizes. It would be possible to leave the LRU counters on a
per-zone basis but it's a heavier calculation across multiple cache
lines that is much more frequent than the retry checks.
Other than the LRU counters, this is mostly a mechanical patch but note
that it introduces a number of anomalies. For example, the scans are
per-zone but using per-node counters. We also mark a node as congested
when a zone is congested. This causes weird problems that are fixed
later but is easier to review.
In the event that there is excessive overhead on 32-bit systems due to
the nodes being on LRU then there are two potential solutions
1. Long-term isolation of highmem pages when reclaim is lowmem
When pages are skipped, they are immediately added back onto the LRU
list. If lowmem reclaim persisted for long periods of time, the same
highmem pages get continually scanned. The idea would be that lowmem
keeps those pages on a separate list until a reclaim for highmem pages
arrives that splices the highmem pages back onto the LRU. It potentially
could be implemented similar to the UNEVICTABLE list.
That would reduce the skip rate with the potential corner case is that
highmem pages have to be scanned and reclaimed to free lowmem slab pages.
2. Linear scan lowmem pages if the initial LRU shrink fails
This will break LRU ordering but may be preferable and faster during
memory pressure than skipping LRU pages.
Link: http://lkml.kernel.org/r/1467970510-21195-4-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Node-based reclaim requires node-based LRUs and locking. This is a
preparation patch that just moves the lru_lock to the node so later
patches are easier to review. It is a mechanical change but note this
patch makes contention worse because the LRU lock is hotter and direct
reclaim and kswapd can contend on the same lock even when reclaiming
from different zones.
Link: http://lkml.kernel.org/r/1467970510-21195-3-git-send-email-mgorman@techsingularity.net
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Rik van Riel <riel@surriel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This is preparation of vmscan for file huge pages. We cannot write out
huge pages, so we need to split them on the way out.
Link: http://lkml.kernel.org/r/1466021202-61880-22-git-send-email-kirill.shutemov@linux.intel.com
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now, VM has a feature to migrate non-lru movable pages so balloon
doesn't need custom migration hooks in migrate.c and compaction.c.
Instead, this patch implements the page->mapping->a_ops->
{isolate|migrate|putback} functions.
With that, we could remove hooks for ballooning in general migration
functions and make balloon compaction simple.
[akpm@linux-foundation.org: compaction.h requires that the includer first include node.h]
Link: http://lkml.kernel.org/r/1464736881-24886-4-git-send-email-minchan@kernel.org
Signed-off-by: Gioh Kim <gi-oh.kim@profitbricks.com>
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Rafael Aquini <aquini@redhat.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
__alloc_pages_slowpath has traditionally relied on the direct reclaim
and did_some_progress as an indicator that it makes sense to retry
allocation rather than declaring OOM. shrink_zones had to rely on
zone_reclaimable if shrink_zone didn't make any progress to prevent from
a premature OOM killer invocation - the LRU might be full of dirty or
writeback pages and direct reclaim cannot clean those up.
zone_reclaimable allows to rescan the reclaimable lists several times
and restart if a page is freed. This is really subtle behavior and it
might lead to a livelock when a single freed page keeps allocator
looping but the current task will not be able to allocate that single
page. OOM killer would be more appropriate than looping without any
progress for unbounded amount of time.
This patch changes OOM detection logic and pulls it out from shrink_zone
which is too low to be appropriate for any high level decisions such as
OOM which is per zonelist property. It is __alloc_pages_slowpath which
knows how many attempts have been done and what was the progress so far
therefore it is more appropriate to implement this logic.
The new heuristic is implemented in should_reclaim_retry helper called
from __alloc_pages_slowpath. It tries to be more deterministic and
easier to follow. It builds on an assumption that retrying makes sense
only if the currently reclaimable memory + free pages would allow the
current allocation request to succeed (as per __zone_watermark_ok) at
least for one zone in the usable zonelist.
This alone wouldn't be sufficient, though, because the writeback might
get stuck and reclaimable pages might be pinned for a really long time
or even depend on the current allocation context. Therefore there is a
backoff mechanism implemented which reduces the reclaim target after
each reclaim round without any progress. This means that we should
eventually converge to only NR_FREE_PAGES as the target and fail on the
wmark check and proceed to OOM. The backoff is simple and linear with
1/16 of the reclaimable pages for each round without any progress. We
are optimistic and reset counter for successful reclaim rounds.
Costly high order pages mostly preserve their semantic and those without
__GFP_REPEAT fail right away while those which have the flag set will
back off after the amount of reclaimable pages reaches equivalent of the
requested order. The only difference is that if there was no progress
during the reclaim we rely on zone watermark check. This is more
logical thing to do than previous 1<<order attempts which were a result
of zone_reclaimable faking the progress.
[vdavydov@virtuozzo.com: check classzone_idx for shrink_zone]
[hannes@cmpxchg.org: separate the heuristic into should_reclaim_retry]
[rientjes@google.com: use zone_page_state_snapshot for NR_FREE_PAGES]
[rientjes@google.com: shrink_zones doesn't need to return anything]
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Motivation:
As pointed out by Linus [2][3] relying on zone_reclaimable as a way to
communicate the reclaim progress is rater dubious. I tend to agree,
not only it is really obscure, it is not hard to imagine cases where a
single page freed in the loop keeps all the reclaimers looping without
getting any progress because their gfp_mask wouldn't allow to get that
page anyway (e.g. single GFP_ATOMIC alloc and free loop). This is rather
rare so it doesn't happen in the practice but the current logic which we
have is rather obscure and hard to follow a also non-deterministic.
This is an attempt to make the OOM detection more deterministic and
easier to follow because each reclaimer basically tracks its own
progress which is implemented at the page allocator layer rather spread
out between the allocator and the reclaim. The more on the
implementation is described in the first patch.
I have tested several different scenarios but it should be clear that
testing OOM killer is quite hard to be representative. There is usually
a tiny gap between almost OOM and full blown OOM which is often time
sensitive. Anyway, I have tested the following 2 scenarios and I would
appreciate if there are more to test.
Testing environment: a virtual machine with 2G of RAM and 2CPUs without
any swap to make the OOM more deterministic.
1) 2 writers (each doing dd with 4M blocks to an xfs partition with 1G
file size, removes the files and starts over again) running in
parallel for 10s to build up a lot of dirty pages when 100 parallel
mem_eaters (anon private populated mmap which waits until it gets
signal) with 80M each.
This causes an OOM flood of course and I have compared both patched
and unpatched kernels. The test is considered finished after there
are no OOM conditions detected. This should tell us whether there are
any excessive kills or some of them premature (e.g. due to dirty pages):
I have performed two runs this time each after a fresh boot.
* base kernel
$ grep "Out of memory:" base-oom-run1.log | wc -l
78
$ grep "Out of memory:" base-oom-run2.log | wc -l
78
$ grep "Kill process" base-oom-run1.log | tail -n1
[ 91.391203] Out of memory: Kill process 3061 (mem_eater) score 39 or sacrifice child
$ grep "Kill process" base-oom-run2.log | tail -n1
[ 82.141919] Out of memory: Kill process 3086 (mem_eater) score 39 or sacrifice child
$ grep "DMA32 free:" base-oom-run1.log | sed 's@.*free:\([0-9]*\)kB.*@\1@' | calc_min_max.awk
min: 5376.00 max: 6776.00 avg: 5530.75 std: 166.50 nr: 61
$ grep "DMA32 free:" base-oom-run2.log | sed 's@.*free:\([0-9]*\)kB.*@\1@' | calc_min_max.awk
min: 5416.00 max: 5608.00 avg: 5514.15 std: 42.94 nr: 52
$ grep "DMA32.*all_unreclaimable? no" base-oom-run1.log | wc -l
1
$ grep "DMA32.*all_unreclaimable? no" base-oom-run2.log | wc -l
3
* patched kernel
$ grep "Out of memory:" patched-oom-run1.log | wc -l
78
miso@tiehlicka /mnt/share/devel/miso/kvm $ grep "Out of memory:" patched-oom-run2.log | wc -l
77
e grep "Kill process" patched-oom-run1.log | tail -n1
[ 497.317732] Out of memory: Kill process 3108 (mem_eater) score 39 or sacrifice child
$ grep "Kill process" patched-oom-run2.log | tail -n1
[ 316.169920] Out of memory: Kill process 3093 (mem_eater) score 39 or sacrifice child
$ grep "DMA32 free:" patched-oom-run1.log | sed 's@.*free:\([0-9]*\)kB.*@\1@' | calc_min_max.awk
min: 5420.00 max: 5808.00 avg: 5513.90 std: 60.45 nr: 78
$ grep "DMA32 free:" patched-oom-run2.log | sed 's@.*free:\([0-9]*\)kB.*@\1@' | calc_min_max.awk
min: 5380.00 max: 6384.00 avg: 5520.94 std: 136.84 nr: 77
e grep "DMA32.*all_unreclaimable? no" patched-oom-run1.log | wc -l
2
$ grep "DMA32.*all_unreclaimable? no" patched-oom-run2.log | wc -l
3
The patched kernel run noticeably longer while invoking OOM killer same
number of times. This means that the original implementation is much
more aggressive and triggers the OOM killer sooner. free pages stats
show that neither kernels went OOM too early most of the time, though. I
guess the difference is in the backoff when retries without any progress
do sleep for a while if there is memory under writeback or dirty which
is highly likely considering the parallel IO.
Both kernels have seen races where zone wasn't marked unreclaimable
and we still hit the OOM killer. This is most likely a race where
a task managed to exit between the last allocation attempt and the oom
killer invocation.
2) 2 writers again with 10s of run and then 10 mem_eaters to consume as much
memory as possible without triggering the OOM killer. This required a lot
of tuning but I've considered 3 consecutive runs in three different boots
without OOM as a success.
* base kernel
size=$(awk '/MemFree/{printf "%dK", ($2/10)-(16*1024)}' /proc/meminfo)
* patched kernel
size=$(awk '/MemFree/{printf "%dK", ($2/10)-(12*1024)}' /proc/meminfo)
That means 40M more memory was usable without triggering OOM killer. The
base kernel sometimes managed to handle the same as patched but it
wasn't consistent and failed in at least on of the 3 runs. This seems
like a minor improvement.
I was testing also GPF_REPEAT costly requests (hughetlb) with fragmented
memory and under memory pressure. The results are in patch 11 where the
logic is implemented. In short I can see huge improvement there.
I am certainly interested in other usecases as well as well as any
feedback. Especially those which require higher order requests.
This patch (of 14):
While playing with the oom detection rework [1] I have noticed that my
heavy order-9 (hugetlb) load close to OOM ended up in an endless loop
where the reclaim hasn't made any progress but did_some_progress didn't
reflect that and compaction_suitable was backing off because no zone is
above low wmark + 1 << order.
It turned out that this is in fact an old standing bug in
compaction_ready which ignores the requested_highidx and did the
watermark check for 0 classzone_idx. This succeeds for zone DMA most
of the time as the zone is mostly unused because of lowmem protection.
As a result costly high order allocatios always report a successfull
progress even when there was none. This wasn't a problem so far
because these allocations usually fail quite early or retry only few
times with __GFP_REPEAT but this will change after later patch in this
series so make sure to not lie about the progress and propagate
requested_highidx down to compaction_ready and use it for both the
watermak check and compaction_suitable to fix this issue.
[1] http://lkml.kernel.org/r/1459855533-4600-1-git-send-email-mhocko@kernel.org
[2] https://lkml.org/lkml/2015/10/12/808
[3] https://lkml.org/lkml/2015/10/13/597
Signed-off-by: Michal Hocko <mhocko@suse.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: Vladimir Davydov <vdavydov@virtuozzo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The inactive file list should still be large enough to contain readahead
windows and freshly written file data, but it no longer is the only
source for detecting multiple accesses to file pages. The workingset
refault measurement code causes recently evicted file pages that get
accessed again after a shorter interval to be promoted directly to the
active list.
With that mechanism in place, we can afford to (on a larger system)
dedicate more memory to the active file list, so we can actually cache
more of the frequently used file pages in memory, and not have them
pushed out by streaming writes, once-used streaming file reads, etc.
This can help things like database workloads, where only half the page
cache can currently be used to cache the database working set. This
patch automatically increases that fraction on larger systems, using the
same ratio that has already been used for anonymous memory.
[hannes@cmpxchg.org: cgroup-awareness]
Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Reported-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Konstantin Khlebnikov pointed out (nearly four years ago, when lumpy
reclaim was removed) that lru_size can be updated by -nr_taken once per
call to isolate_lru_pages(), instead of page by page.
Update it inside isolate_lru_pages(), or at its two callsites? I chose
to update it at the callsites, rearranging and grouping the updates by
nr_taken and nr_scanned together in both.
With one exception, mem_cgroup_update_lru_size(,lru,) is then used where
__mod_zone_page_state(,NR_LRU_BASE+lru,) is used; and we shall be adding
some more calls in a future commit. Make the code a little smaller and
simpler by incorporating stat update in lru_size update.
The exception was move_active_pages_to_lru(), which aggregated the
pgmoved stat update separately from the individual lru_size updates; but
I still think this a simplification worth making.
However, the __mod_zone_page_state is not peculiar to mem_cgroups: so
better use the name update_lru_size, calls mem_cgroup_update_lru_size
when CONFIG_MEMCG.
Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andres Lagar-Cavilla <andreslc@google.com>
Cc: Yang Shi <yang.shi@linaro.org>
Cc: Ning Qu <quning@gmail.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Many developers already know that field for reference count of the
struct page is _count and atomic type. They would try to handle it
directly and this could break the purpose of page reference count
tracepoint. To prevent direct _count modification, this patch rename it
to _refcount and add warning message on the code. After that, developer
who need to handle reference count will find that field should not be
accessed directly.
[akpm@linux-foundation.org: fix comments, per Vlastimil]
[akpm@linux-foundation.org: Documentation/vm/transhuge.txt too]
[sfr@canb.auug.org.au: sync ethernet driver changes]
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Sunil Goutham <sgoutham@cavium.com>
Cc: Chris Metcalf <cmetcalf@mellanox.com>
Cc: Manish Chopra <manish.chopra@qlogic.com>
Cc: Yuval Mintz <yuval.mintz@qlogic.com>
Cc: Tariq Toukan <tariqt@mellanox.com>
Cc: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When kswapd goes to sleep it checks if the node is balanced and at first
it sleeps only for HZ/10 time, then rechecks if the node is still
balanced and nobody has woken it during the initial sleep. Only then it
goes fully sleep until an allocation slowpath wakes it up again.
For higher-order allocations, waking up kcompactd is done only before
the full sleep. This turns out to be an issue in case another
high-order allocation fails during the initial sleep. It will wake
kswapd up, however kswapd considers the zone balanced from the order-0
perspective, and will just quickly try to sleep again. So if there's a
longer stream of high-order allocations hitting the slowpath and waking
up kswapd, it might never actually wake up kcompactd, which may be
considered a regression from kswapd-based compaction. In the worst
case, it might be that a single allocation that cannot direct
reclaim/compact itself is waking kswapd in the retry loop and preventing
kcompactd from being woken up and unblocking it.
This patch makes sure kcompactd is woken up in such situations by simply
moving the wakeup before the short initial sleep. More efficient
solution would be to wake kcompactd immediately instead of kswapd if the
node is already order-0 balanced, but in that case we should also move
reset_isolation_suitable() call to kcompactd so it's not adding to the
allocator's latency. Since it's late in the 4.6 cycle, let's go with
the simpler change for now.
Fixes: accf62422b ("mm, kswapd: replace kswapd compaction with waking up kcompactd")
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We have been reclaimed highmem zone if buffer_heads is over limit but
commit 6b4f7799c6 ("mm: vmscan: invoke slab shrinkers from
shrink_zone()") changed the behavior so it doesn't reclaim highmem zone
although buffer_heads is over the limit. This patch restores the logic.
Fixes: 6b4f7799c6 ("mm: vmscan: invoke slab shrinkers from shrink_zone()")
Signed-off-by: Minchan Kim <minchan@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The success of CMA allocation largely depends on the success of
migration and key factor of it is page reference count. Until now, page
reference is manipulated by direct calling atomic functions so we cannot
follow up who and where manipulate it. Then, it is hard to find actual
reason of CMA allocation failure. CMA allocation should be guaranteed
to succeed so finding offending place is really important.
In this patch, call sites where page reference is manipulated are
converted to introduced wrapper function. This is preparation step to
add tracepoint to each page reference manipulation function. With this
facility, we can easily find reason of CMA allocation failure. There is
no functional change in this patch.
In addition, this patch also converts reference read sites. It will
help a second step that renames page._count to something else and
prevents later attempt to direct access to it (Suggested by Andrew).
Signed-off-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Acked-by: Michal Nazarewicz <mina86@mina86.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's just convenient to implement a memcg aware shrinker when you know
that shrink_control->memcg != NULL unless memcg_kmem_enabled() returns
false.
Signed-off-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Similarly to direct reclaim/compaction, kswapd attempts to combine
reclaim and compaction to attempt making memory allocation of given
order available.
The details differ from direct reclaim e.g. in having high watermark as
a goal. The code involved in kswapd's reclaim/compaction decisions has
evolved to be quite complex.
Testing reveals that it doesn't actually work in at least one scenario,
and closer inspection suggests that it could be greatly simplified
without compromising on the goal (make high-order page available) or
efficiency (don't reclaim too much). The simplification relieas of
doing all compaction in kcompactd, which is simply woken up when high
watermarks are reached by kswapd's reclaim.
The scenario where kswapd compaction doesn't work was found with mmtests
test stress-highalloc configured to attempt order-9 allocations without
direct reclaim, just waking up kswapd. There was no compaction attempt
from kswapd during the whole test. Some added instrumentation shows
what happens:
- balance_pgdat() sets end_zone to Normal, as it's not balanced
- reclaim is attempted on DMA zone, which sets nr_attempted to 99, but
it cannot reclaim anything, so sc.nr_reclaimed is 0
- for zones DMA32 and Normal, kswapd_shrink_zone uses testorder=0, so
it merely checks if high watermarks were reached for base pages.
This is true, so no reclaim is attempted. For DMA, testorder=0
wasn't used, as compaction_suitable() returned COMPACT_SKIPPED
- even though the pgdat_needs_compaction flag wasn't set to false, no
compaction happens due to the condition sc.nr_reclaimed >
nr_attempted being false (as 0 < 99)
- priority-- due to nr_reclaimed being 0, repeat until priority reaches
0 pgdat_balanced() is false as only the small zone DMA appears
balanced (curiously in that check, watermark appears OK and
compaction_suitable() returns COMPACT_PARTIAL, because a lower
classzone_idx is used there)
Now, even if it was decided that reclaim shouldn't be attempted on the
DMA zone, the scenario would be the same, as (sc.nr_reclaimed=0 >
nr_attempted=0) is also false. The condition really should use >= as
the comment suggests. Then there is a mismatch in the check for setting
pgdat_needs_compaction to false using low watermark, while the rest uses
high watermark, and who knows what other subtlety. Hopefully this
demonstrates that this is unsustainable.
Luckily we can simplify this a lot. The reclaim/compaction decisions
make sense for direct reclaim scenario, but in kswapd, our primary goal
is to reach high watermark in order-0 pages. Afterwards we can attempt
compaction just once. Unlike direct reclaim, we don't reclaim extra
pages (over the high watermark), the current code already disallows it
for good reasons.
After this patch, we simply wake up kcompactd to process the pgdat,
after we have either succeeded or failed to reach the high watermarks in
kswapd, which goes to sleep. We pass kswapd's order and classzone_idx,
so kcompactd can apply the same criteria to determine which zones are
worth compacting. Note that we use the classzone_idx from
wakeup_kswapd(), not balanced_classzone_idx which can include higher
zones that kswapd tried to balance too, but didn't consider them in
pgdat_balanced().
Since kswapd now cannot create high-order pages itself, we need to
adjust how it determines the zones to be balanced. The key element here
is adding a "highorder" parameter to zone_balanced, which, when set to
false, makes it consider only order-0 watermark instead of the desired
higher order (this was done previously by kswapd_shrink_zone(), but not
elsewhere). This false is passed for example in pgdat_balanced().
Importantly, wakeup_kswapd() uses true to make sure kswapd and thus
kcompactd are woken up for a high-order allocation failure.
The last thing is to decide what to do with pageblock_skip bitmap
handling. Compaction maintains a pageblock_skip bitmap to record
pageblocks where isolation recently failed. This bitmap can be reset by
three ways:
1) direct compaction is restarting after going through the full deferred cycle
2) kswapd goes to sleep, and some other direct compaction has previously
finished scanning the whole zone and set zone->compact_blockskip_flush.
Note that a successful direct compaction clears this flag.
3) compaction was invoked manually via trigger in /proc
The case 2) is somewhat fuzzy to begin with, but after introducing
kcompactd we should update it. The check for direct compaction in 1),
and to set the flush flag in 2) use current_is_kswapd(), which doesn't
work for kcompactd. Thus, this patch adds bool direct_compaction to
compact_control to use in 2). For the case 1) we remove the check
completely - unlike the former kswapd compaction, kcompactd does use the
deferred compaction functionality, so flushing tied to restarting from
deferred compaction makes sense here.
Note that when kswapd goes to sleep, kcompactd is woken up, so it will
see the flushed pageblock_skip bits. This is different from when the
former kswapd compaction observed the bits and I believe it makes more
sense. Kcompactd can afford to be more thorough than a direct
compaction trying to limit allocation latency, or kswapd whose primary
goal is to reclaim.
For testing, I used stress-highalloc configured to do order-9
allocations with GFP_NOWAIT|__GFP_HIGH|__GFP_COMP, so they relied just
on kswapd/kcompactd reclaim/compaction (the interfering kernel builds in
phases 1 and 2 work as usual):
stress-highalloc
4.5-rc1+before 4.5-rc1+after
-nodirect -nodirect
Success 1 Min 1.00 ( 0.00%) 5.00 (-66.67%)
Success 1 Mean 1.40 ( 0.00%) 6.20 (-55.00%)
Success 1 Max 2.00 ( 0.00%) 7.00 (-16.67%)
Success 2 Min 1.00 ( 0.00%) 5.00 (-66.67%)
Success 2 Mean 1.80 ( 0.00%) 6.40 (-52.38%)
Success 2 Max 3.00 ( 0.00%) 7.00 (-16.67%)
Success 3 Min 34.00 ( 0.00%) 62.00 ( 1.59%)
Success 3 Mean 41.80 ( 0.00%) 63.80 ( 1.24%)
Success 3 Max 53.00 ( 0.00%) 65.00 ( 2.99%)
User 3166.67 3181.09
System 1153.37 1158.25
Elapsed 1768.53 1799.37
4.5-rc1+before 4.5-rc1+after
-nodirect -nodirect
Direct pages scanned 32938 32797
Kswapd pages scanned 2183166 2202613
Kswapd pages reclaimed 2152359 2143524
Direct pages reclaimed 32735 32545
Percentage direct scans 1% 1%
THP fault alloc 579 612
THP collapse alloc 304 316
THP splits 0 0
THP fault fallback 793 778
THP collapse fail 11 16
Compaction stalls 1013 1007
Compaction success 92 67
Compaction failures 920 939
Page migrate success 238457 721374
Page migrate failure 23021 23469
Compaction pages isolated 504695 1479924
Compaction migrate scanned 661390 8812554
Compaction free scanned 13476658 84327916
Compaction cost 262 838
After this patch we see improvements in allocation success rate
(especially for phase 3) along with increased compaction activity. The
compaction stalls (direct compaction) in the interfering kernel builds
(probably THP's) also decreased somewhat thanks to kcompactd activity,
yet THP alloc successes improved a bit.
Note that elapsed and user time isn't so useful for this benchmark,
because of the background interference being unpredictable. It's just
to quickly spot some major unexpected differences. System time is
somewhat more useful and that didn't increase.
Also (after adjusting mmtests' ftrace monitor):
Time kswapd awake 2547781 2269241
Time kcompactd awake 0 119253
Time direct compacting 939937 557649
Time kswapd compacting 0 0
Time kcompactd compacting 0 119099
The decrease of overal time spent compacting appears to not match the
increased compaction stats. I suspect the tasks get rescheduled and
since the ftrace monitor doesn't see that, the reported time is wall
time, not CPU time. But arguably direct compactors care about overall
latency anyway, whether busy compacting or waiting for CPU doesn't
matter. And that latency seems to almost halved.
It's also interesting how much time kswapd spent awake just going
through all the priorities and failing to even try compacting, over and
over.
We can also configure stress-highalloc to perform both direct
reclaim/compaction and wakeup kswapd/kcompactd, by using
GFP_KERNEL|__GFP_HIGH|__GFP_COMP:
stress-highalloc
4.5-rc1+before 4.5-rc1+after
-direct -direct
Success 1 Min 4.00 ( 0.00%) 9.00 (-50.00%)
Success 1 Mean 8.00 ( 0.00%) 10.00 (-19.05%)
Success 1 Max 12.00 ( 0.00%) 11.00 ( 15.38%)
Success 2 Min 4.00 ( 0.00%) 9.00 (-50.00%)
Success 2 Mean 8.20 ( 0.00%) 10.00 (-16.28%)
Success 2 Max 13.00 ( 0.00%) 11.00 ( 8.33%)
Success 3 Min 75.00 ( 0.00%) 74.00 ( 1.33%)
Success 3 Mean 75.60 ( 0.00%) 75.20 ( 0.53%)
Success 3 Max 77.00 ( 0.00%) 76.00 ( 0.00%)
User 3344.73 3246.04
System 1194.24 1172.29
Elapsed 1838.04 1836.76
4.5-rc1+before 4.5-rc1+after
-direct -direct
Direct pages scanned 125146 120966
Kswapd pages scanned 2119757 2135012
Kswapd pages reclaimed 2073183 2108388
Direct pages reclaimed 124909 120577
Percentage direct scans 5% 5%
THP fault alloc 599 652
THP collapse alloc 323 354
THP splits 0 0
THP fault fallback 806 793
THP collapse fail 17 16
Compaction stalls 2457 2025
Compaction success 906 518
Compaction failures 1551 1507
Page migrate success 2031423 2360608
Page migrate failure 32845 40852
Compaction pages isolated 4129761 4802025
Compaction migrate scanned 11996712 21750613
Compaction free scanned 214970969 344372001
Compaction cost 2271 2694
In this scenario, this patch doesn't change the overall success rate as
direct compaction already tries all it can. There's however significant
reduction in direct compaction stalls (that is, the number of
allocations that went into direct compaction). The number of successes
(i.e. direct compaction stalls that ended up with successful
allocation) is reduced by the same number. This means the offload to
kcompactd is working as expected, and direct compaction is reduced
either due to detecting contention, or compaction deferred by kcompactd.
In the previous version of this patchset there was some apparent
reduction of success rate, but the changes in this version (such as
using sync compaction only), new baseline kernel, and/or averaging
results from 5 executions (my bet), made this go away.
Ftrace-based stats seem to roughly agree:
Time kswapd awake 2532984 2326824
Time kcompactd awake 0 257916
Time direct compacting 864839 735130
Time kswapd compacting 0 0
Time kcompactd compacting 0 257585
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
During work on kcompactd integration I have spotted a confusing check of
balance_classzone_idx, which I believe is bogus.
The balanced_classzone_idx is filled by balance_pgdat() as the highest
zone it attempted to balance. This was introduced by commit dc83edd941
("mm: kswapd: use the classzone idx that kswapd was using for
sleeping_prematurely()").
The intention is that (as expressed in today's function names), the
value used for kswapd_shrink_zone() calls in balance_pgdat() is the same
as for the decisions in kswapd_try_to_sleep().
An unwanted side-effect of that commit was breaking the checks in
kswapd() whether there was another kswapd_wakeup with a tighter (=lower)
classzone_idx. Commits 215ddd6664 ("mm: vmscan: only read
new_classzone_idx from pgdat when reclaiming successfully") and
d2ebd0f6b8 ("kswapd: avoid unnecessary rebalance after an unsuccessful
balancing") tried to fixed, but apparently introduced a bogus check that
this patch removes.
Consider zone indexes X < Y < Z, where:
- Z is the value used for the first kswapd wakeup.
- Y is returned as balanced_classzone_idx, which means zones with index higher
than Y (including Z) were found to be unreclaimable.
- X is the value used for the second kswapd wakeup
The new wakeup with value X means that kswapd is now supposed to balance
harder all zones with index <= X. But instead, due to Y < Z, it will go
sleep and won't read the new value X. This is subtly wrong.
The effect of this patch is that kswapd will react better in some
situations, where e.g. the first wakeup is for ZONE_DMA32, the second is
for ZONE_DMA, and due to unreclaimable ZONE_NORMAL. Before this patch,
kswapd would go sleep instead of reclaiming ZONE_DMA harder. I expect
these situations are very rare, and more value is in better
maintainability due to the removal of confusing and bogus check.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There are several users that nest lock_page_memcg() inside lock_page()
to prevent page->mem_cgroup from changing. But the page lock prevents
pages from moving between cgroups, so that is unnecessary overhead.
Remove lock_page_memcg() in contexts with locked contexts and fix the
debug code in the page stat functions to be okay with the page lock.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Now that migration doesn't clear page->mem_cgroup of live pages anymore,
it's safe to make lock_page_memcg() and the memcg stat functions take
pages, and spare the callers from memcg objects.
[akpm@linux-foundation.org: fix warnings]
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Suggested-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Cache thrash detection (see a528910e12 "mm: thrash detection-based
file cache sizing" for details) currently only works on the system
level, not inside cgroups. Worse, as the refaults are compared to the
global number of active cache, cgroups might wrongfully get all their
refaults activated when their pages are hotter than those of others.
Move the refault machinery from the zone to the lruvec, and then tag
eviction entries with the memcg ID. This makes the thrash detection
work correctly inside cgroups.
[sergey.senozhatsky@gmail.com: do not return from workingset_activation() with locked rcu and page]
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reviewed-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
These patches tag the page cache radix tree eviction entries with the
memcg an evicted page belonged to, thus making per-cgroup LRU reclaim
work properly and be as adaptive to new cache workingsets as global
reclaim already is.
This should have been part of the original thrash detection patch
series, but was deferred due to the complexity of those patches.
This patch (of 5):
So far the only sites that needed to exclude charge migration to
stabilize page->mem_cgroup have been per-cgroup page statistics, hence
the name mem_cgroup_begin_page_stat(). But per-cgroup thrash detection
will add another site that needs to ensure page->mem_cgroup lifetime.
Rename these locking functions to the more generic lock_page_memcg() and
unlock_page_memcg(). Since charge migration is a cgroup1 feature only,
we might be able to delete it at some point, and these now easy to
identify locking sites along with it.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Suggested-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
zone_reclaimable_pages() is used in should_reclaim_retry() which uses it
to calculate the target for the watermark check. This means that
precise numbers are important for the correct decision.
zone_reclaimable_pages uses zone_page_state which can contain stale data
with per-cpu diffs not synced yet (the last vmstat_update might have run
1s in the past).
Use zone_page_state_snapshot() in zone_reclaimable_pages() instead.
None of the current callers is in a hot path where getting the precise
value (which involves per-cpu iteration) would cause an unreasonable
overhead.
Signed-off-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Suggested-by: David Rientjes <rientjes@google.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Hillf Danton <hillf.zj@alibaba-inc.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Yafang Shao
Yang Shi
Kuo-Hsin Yang
Shakeel Butt
Minchan Kim
Kirill Tkhai
Johannes Weiner
Linus Torvalds
Sakari Ailus
Andrey Ryabinin
Alexey Dobriyan
Wei Yang
Dave Chinner
Hugh Dickins
Mel Gorman
Jani Nikula
Roman Gushchin
Matthew Wilcox
Jiang Biao
Vladimir Davydov
Greg Thelen
Omar Sandoval
Tetsuo Handa
Matthew Wilcox
Steven Rostedt
David Rientjes
Huang Ying
Mike Rapoport
Jan Kara
Josef Bacik
Greg Kroah-Hartman
Jens Axboe
Michal Hocko
Chris Wilson
Peter Zijlstra
Nick Desaulniers
Thomas Gleixner
Vlastimil Babka
Yisheng Xie
Shantanu Goel
Shaohua Li
Ingo Molnar
Mel Gorman
Sebastian Andrzej Siewior
Aneesh Kumar K.V
Vladimir Davydov
Kirill A. Shutemov
Rik van Riel
Joonsoo Kim