Rename the imx7-mipi-csis.c driver to remove the reference to i.MX7.
The driver is for an IP core found on i.MX7 and i.MX8 SoC, so do not
specify a SoC version number in the driver name.
Remove the references to the i.MX7 SoC in the driver symbols and expand
the driver's header with more information about the IP core the driver
controls.
Also rename the associated bindings documentation.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The imx7-mipi-csis driver is in a good state and can be destaged.
Move the imx7-mipi-csis.c driver to the newly created
drivers/media/platform/imx directory and plumb the related
options in Kconfig and in Makefile.
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rui Miguel Silva <rmfrfs@gmail.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Replace the driver-specific definitions of MIPI CSI-2 data types with
macros from mipi-csi2.h.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
There are many CSI-2-related drivers in the media subsystem that come
with their own macros to handle the CSI-2 data types (or just hardcode
the numerical values). Provide a shared header with definitions for
those data types that driver can use.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
VSP hardware could be used (e.g. by the bootloader) before driver load,
and some interrupts could be left in enabled and pending state. In this
case, setting up VSP interrupt handler without masking interrupts before
causes interrupt handler to be immediately called (and crash due to null
vsp->info dereference).
Fix that by explicitly masking all interrupts before setting the interrupt
handler. To do so, have to set the interrupt handler later, after hw
revision is already detected and number of interrupts to mask gets
known.
Based on patch by Koji Matsuoka <koji.matsuoka.xm@renesas.com> included
in the Renesas BSP kernel.
Signed-off-by: Nikita Yushchenko <nikita.yoush@cogentembedded.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Adds the requisite device id to support detection of the Apple FaceTime
HD webcam exposed over the T2 BCE VHCI interface.
Tested-by: Aun-Ali Zaidi <admin@kodeit.net>
Signed-off-by: Paul Pawlowski <paul@mrarm.io>
Signed-off-by: Aun-Ali Zaidi <admin@kodeit.net>
Signed-off-by: Aditya Garg <gargaditya08@live.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Without this the default (SMPTE 170M) from init_cfg stays unchanged.
Even after configuring 'srgb' colorspace (or 'raw')
$ media-ctl -V "'csis-32e30000.mipi-csi':0 [colorspace:srgb]"
the colorspace does not change at all:
$ media-ctl --get-v4l2 "'csis-32e30000.mipi-csi':0"
[fmt:SRGGB10_1X10/1920x1080 field:none colorspace:smpte170m xfer:709
ycbcr:601 quantization:lim-range]
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In cal_ctx_v4l2_init_formats(), devm_kzalloc() is assigned to
ctx->active_fmt and there is a dereference of it after that, which could
lead to NULL pointer dereference on failure of devm_kzalloc().
Fix this bug by adding a NULL check of ctx->active_fmt.
This bug was found by a static analyzer.
Builds with 'make allyesconfig' show no new warnings, and our static
analyzer no longer warns about this code.
Fixes: 7168155002 ("media: ti-vpe: cal: Move format handling to cal.c and expose helpers")
Signed-off-by: Zhou Qingyang <zhou1615@umn.edu>
Reviewed-by: Pratyush Yadav <p.yadav@ti.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This error path needs to drop the mutex to avoid a deadlock.
Fixes: 7be91e02ed ("media: i2c: Add ov08d10 camera sensor driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
MWB gain register are used to set gain for each mwb channel mannually.
However, it will involve some artifacts at low light environment as gain
cannot be applied to each channel synchronously. Update the driver to use
group write for digital gain to make the sure RGB digital gain be applied
together at frame boundary.
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
link-frequencies is required but only mentioned in the example. Add
it to the description.
Fixes: f3ce7200ca ("media: dt-bindings: media: document SK Hynix Hi-846 MIPI CSI-2 8M pixel sensor")
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), memmove(), and memset(), avoid
intentionally writing across neighboring fields. Wrap the target region
in struct_group(). This additionally fixes a theoretical misalignment
of the copy (since the size of "buf" changes between 64-bit and 32-bit,
but this is likely never built for 64-bit).
FWIW, I think this code is totally broken on 64-bit (which appears to
not be a "real" build configuration): it would either always fail (with
an uninitialized data->buf_size) or would cause corruption in userspace
due to the copy_to_user() in the call path against an uninitialized
data->buf value:
omap3isp_stat_request_statistics_time32(...)
struct omap3isp_stat_data data64;
...
omap3isp_stat_request_statistics(stat, &data64);
int omap3isp_stat_request_statistics(struct ispstat *stat,
struct omap3isp_stat_data *data)
...
buf = isp_stat_buf_get(stat, data);
static struct ispstat_buffer *isp_stat_buf_get(struct ispstat *stat,
struct omap3isp_stat_data *data)
...
if (buf->buf_size > data->buf_size) {
...
return ERR_PTR(-EINVAL);
}
...
rval = copy_to_user(data->buf,
buf->virt_addr,
buf->buf_size);
Regardless, additionally initialize data64 to be zero-filled to avoid
undefined behavior.
Link: https://lore.kernel.org/lkml/20211215220505.GB21862@embeddedor
Cc: Arnd Bergmann <arnd@arndb.de>
Fixes: 378e3f81cb ("media: omap3isp: support 64-bit version of omap3isp_stat_data")
Cc: stable@vger.kernel.org
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
MIPI CSI-2 continuous and non-continuous clock modes are mutually
exclusive. Drop the V4L2_MBUS_CSI2_CONTINUOUS_CLOCK flag and use
V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK only.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The V4L2_MBUS_CSI2_CHANNEL_* flags are a legacy API. Only
V4L2_MBUS_CSI2_CHANNEL_0 is used, set in a single driver, and never
read. Drop those flags. Virtual channel information should be conveyed
through frame descriptors instead.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The V4L2_MBUS_CSI2_*_LANE flags are a legacy API and are unused. Drop
them.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The media bus configuration is specified through a set of flags, some of
which being mutually exclusive. This doesn't scale to express more
complex configurations. Improve the API by replacing the single flags
field in v4l2_mbus_config by a union of v4l2_mbus_config_* structures.
The flags themselves are still used in those structures, so they are
kept here. Drivers are however updated to use structure fields instead
of flags when already possible.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
As part of removing mbus config flags, remove VC flag use in the
microchip-csi2dc driver. The support can be reintroduced later on as part
of the streams patches.
[mchehab: patch accepted by Eugen: https://lore.kernel.org/linux-media/c0676a4e-803f-9f1c-542b-4b007705ef3d@microchip.com/, so add an accepted-by tag]
Accepted-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
QCOM ISPs do not support having a programmable CSI Clock Lane number.
In order to accurately reflect this, the different CSIPHY HW versions
need to have their own register layer for computing lane masks.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Calling hdmi_infoframe_unpack() with static sizeof(buffer) skips all
the size checking done later in hdmi_infoframe_unpack(). A better
value is the amount of data read into buffer.
Fixes: 480b8b3e42 ("video/hdmi: Pass buffer size to infoframe unpack functions")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The vimc driver is used for testing purpose, and some test use cases
involve sharing buffers with a consumer device. Consumers often require
DMA contiguous memory, which vimc doesn't currently support. This leads
in the best case to usage of bounce buffers, which is very slow, and in
the worst case in a complete failure.
Add support for the dma-contig allocator in vimc to support those use
cases properly. The allocator is selected through a new "allocator"
module parameter, which defaults to vmalloc.
[hverkuil: add missing 'select VIDEOBUF2_DMA_CONFIG' to Kconfig]
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The CLIP, SRC & DST registers are coded to take the pixel/line start & end,
starting from 0. Thus the end should be the width/height minus 1.
It can be an issue with clipping and rotation, where it will add spurious
lines from uninitialized or unwanted data with a shift in the result.
Fixes: 59a635327c ("media: meson: Add M2M driver for the Amlogic GE2D Accelerator Unit")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Tag all the coded formats where the s5p_mfc decoder supports dynamic
resolution switching or has a bytestream parser.
Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
There is a BIT(nr) macro available in Linux Kernel,
which does the same thing.
Example: BIT(7) = (1UL << 7)
Link: https://lore.kernel.org/linux-media/20220206185232.21726-1-mosescb.dev@gmail.com
Signed-off-by: Moses Christopher Bollavarapu <mosescb.dev@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Don't populate the read-only array idx_map on the stack but
instead it static const. Also makes the object code a little smaller.
Link: https://lore.kernel.org/linux-media/20220109195129.46118-1-colin.i.king@gmail.com
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The TrekStor SurfTab duo W1 10.1 has a hw bug where turning eldo2 back on
after having turned it off causes the CPLM3218 ambient-light-sensor on
the front camera sensor's I2C bus to crash, hanging the bus.
Add a DMI quirk table for systems on which to leave eldo2 on.
Note an alternative fix is to turn off the CPLM3218 ambient-light-sensor
as long as the camera sensor is being used, this is what Windows seems
to do as a workaround (based on analyzing the DSDT). But that is not
easy to do cleanly under Linux.
Link: https://lore.kernel.org/linux-media/20220116215204.307649-10-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
On devices with 2 cameras and no _DSM / EFI-vars providing CsiPort
clock info, defaulting to CsiPort 0 obviously is wrong for 1 of the
2 cameras.
The Intel Cherry Trail (ISP2401) reference design combines:
pmc_plt_clk_2 with CsiPort 0
pmc_plt_clk_4 with CsiPort 1
The Intel Bay Trail (ISP2400) reference design combines:
pmc_plt_clk_1 with CsiPort 0
pmc_plt_clk_0 with CsiPort 1
Use this knowledge to set the default CsiPort value based on
the detected CLK for the sensor.
Link: https://lore.kernel.org/linux-media/20220116215204.307649-9-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Fix axp_v1p8_on() turning ELDO2 off at the end again by removing the bogus
code which turns it off again after just having turned it on.
Link: https://lore.kernel.org/linux-media/20220116215204.307649-8-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Testing on multiple tablet models has shown that Android always uses
1.6V for ELDO1, adjust our code to match.
This also matches with how ELDO1 is used in the DSDTs on these devices,
where for Cherry Trail (ISP2401) based devices ELDO1 is used for an
ACPI power-resource which is named "P16P".
Note on Bay Trail (ISP2400) based devices the power-resource is called
"P15P", which suggests that 1.5V might be a better value there.
Link: https://lore.kernel.org/linux-media/20220116215204.307649-7-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
On devices with 2 sensors the 2 sensors may get probed simultaneously
and the v1p8 and v2p8 regulators are ususally shared between the
2 sensors.
This means that the probe() function of sensor 1 may end up calling
gmin_v1p8_ctrl(..., false) turning the regulator off while sensor 2's
probe() function still needs it to be on, causing the probe() of
sensor 2 to sometimes fail.
Fix this by adding an enable-count for both regulators and only
disabling them again when that goes to 0.
Note all this really should be converted to use the standard kernel
regulator framework, I have doing this on my long term TODO list,
this fix is only meant as a temporary workaround for the issue.
Link: https://lore.kernel.org/linux-media/20220116215204.307649-6-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The second write done in axp_regulator_set() must go to the ctrl_reg which
turns the various regulators on/off. This replaces the second write
writing the sel_reg, which sets the voltage for the regulator, for a
second time with a wrong value.
Link: https://lore.kernel.org/linux-media/20220116215204.307649-5-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
IPS2400 is never defined, for ISP2401 builds ISP2401 gets defined and
for ISP2400 nothing gets defined, so any #ifdef ISP2400 checks should
be #ifndef ISP2401 checks instead.
Link: https://lore.kernel.org/linux-media/20220116215204.307649-3-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
IS_ISP2401 is a function like macro which is always defined, so it must
not be used together with #ifdef. #ifdef checks should check for
"ISP2401", not "IS_ISP2401".
Link: https://lore.kernel.org/linux-media/20220116215204.307649-2-hdegoede@redhat.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
If the driver reports that the hardware had an overflow, report this to
userspace. It would be nice to know when this happens, and not just get
a long space.
This change has been tested with lircd, ir-ctl, and ir-keytable.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The driver report a reset event when the hardware reports and overflow.
There is no reason to have a generic "reset" event.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
These features have never been implemented by any lirc driver, including
staging or out of tree drivers. The ioctls for these feaures were removed
in commit d55f09abe2 ("[media] lirc.h: remove several unused ioctls").
So, we can safely remove them.
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Correct timing's fp/sync/bp value based on the information below.
It should be noticed that the calculation formula should be changed
per sync polarity.
The sequence of signal: sync - backporch - video data - frontporch
The following registers start counting from sync's rising edge:
1. VR090: frame edge's left and right
2. VR094: frame edge's top and bottom
3. VR09C: counting from sync's rising edge to falling edge
[Vertical timing]
+--+ +-------------------+ +--+
| | | v i d e o | | |
+--+ +-----+ +-----+ +---+
vsync+--+
frame_top+--------+
frame_bottom+----------------------------+
+-------------------+
| v i d e o |
+--+ +-----+ +-----+ +---+
| | | |
+--+ +--+
vsync+-------------------------------+
frame_top+-----+
frame_bottom+-------------------------+
[Horizontal timing]
+--+ +-------------------+ +--+
| | | v i d e o | | |
+--+ +-----+ +-----+ +---+
hsync+--+
frame_left+--------+
frame_right+----------------------------+
+-------------------+
| v i d e o |
+--+ +-----+ +-----+ +---+
| | | |
+--+ +--+
hsync+-------------------------------+
frame_left+-----+
frame_right+-------------------------+
Ex. 1920x1200@60 whose vsync polarity is negative
VR098: c4d3efff, VR09C: 04cc001f
v-total = 0x4D3 (VR098[27:16]) = 1235
v-sync = 0x4CC (VR09C[27:16]) = 1228
[hverkuil: drop unused variable mds]
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Use the bitfield macro FIELD_GET, and GENMASK to do the shift and mask in
one go for reg values.
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Previous reg-field, 0x98[11:0], stands for the period of the detected
hsync signal.
Use the correct reg, 0xa0, to get h-total in pixels.
Fixes: d2b4387f3b ("media: platform: Add Aspeed Video Engine driver")
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
In ast2500, engine will stop occasionally for 1360x768.
This is a bug which has been addressed, but the workaround is specific
for 1680 only. Here we make it more complete.
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The new messages are listed as below:
1. jpeg header and capture buffer information
2. information for each irq
3. current capture mode, sync or direct-fetch
4. time consumed for each frame
5. input timing changed information
[hverkuil: use %pad for dma_addr_t to avoid compiler warnings]
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The debug log level, 0~3, is controlled by module_param, debug.
The higher the value, the more the information.
0: off
1: info
2: debug
3: register operations
Signed-off-by: Jammy Huang <jammy_huang@aspeedtech.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Allow the dw9714 to control a regulator and adjust suspend() and resume()
to support both runtime and system pm.
Signed-off-by: Angus Ainslie <angus@akkea.ca>
Signed-off-by: Martin Kepplinger <martin.kepplinger@puri.sm>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The module identifying will try to get the sub device data which
will be ready after sub device initialisation, so if try to use the
subdev data to deference the client will cause NULL pointer
dereference, this patch move the module identification after
v4l2_i2c_subdev_init() to fix this issue, it also fixes duplicate
module idendification.
Fixes: ada2c4f54d ("media: ov2740: support device probe in non-zero ACPI D state")
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add Alain as sti maintainer for both drm/sti & cec/sti.
Add Raphaël as stm maintainer for drm/stm.
Signed-off-by: Philippe Cornu <philippe.cornu@foss.st.com>
Reviewed-by: Alain Volmat <alain.volmat@foss.st.com>
Reviewed-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Update Benjamin Gaignard address and remove it from no more maintained
drivers.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Philippe Cornu <philippe.cornu@foss.st.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Jacopo Mondi
Laurent Pinchart
Nikita Yushchenko
Paul Pawlowski
Alexander Stein
Zhou Qingyang
Dan Carpenter
Bingbu Cao
Martin Kepplinger
Kees Cook
Sakari Ailus
Robert Foss
Tom Rix
Neil Armstrong
Maxime Jourdan
Tsuchiya Yuto
Moses Christopher Bollavarapu
Colin Ian King
Hans de Goede
Sean Young
Jammy Huang
Angus Ainslie
Philippe Cornu
Benjamin Gaignard