Граф коммитов

50 Коммитов

Автор SHA1 Сообщение Дата
Song Liu 963ec27a10 bpf: fix raw_tp test run in preempt kernel
In preempt kernel, BPF_PROG_TEST_RUN on raw_tp triggers:

[   35.874974] BUG: using smp_processor_id() in preemptible [00000000]
code: new_name/87
[   35.893983] caller is bpf_prog_test_run_raw_tp+0xd4/0x1b0
[   35.900124] CPU: 1 PID: 87 Comm: new_name Not tainted 5.9.0-rc6-g615bd02bf #1
[   35.907358] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
BIOS 1.10.2-1ubuntu1 04/01/2014
[   35.916941] Call Trace:
[   35.919660]  dump_stack+0x77/0x9b
[   35.923273]  check_preemption_disabled+0xb4/0xc0
[   35.928376]  bpf_prog_test_run_raw_tp+0xd4/0x1b0
[   35.933872]  ? selinux_bpf+0xd/0x70
[   35.937532]  __do_sys_bpf+0x6bb/0x21e0
[   35.941570]  ? find_held_lock+0x2d/0x90
[   35.945687]  ? vfs_write+0x150/0x220
[   35.949586]  do_syscall_64+0x2d/0x40
[   35.953443]  entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fix this by calling migrate_disable() before smp_processor_id().

Fixes: 1b4d60ec16 ("bpf: Enable BPF_PROG_TEST_RUN for raw_tracepoint")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2020-09-30 08:34:08 -07:00
Song Liu 1b4d60ec16 bpf: Enable BPF_PROG_TEST_RUN for raw_tracepoint
Add .test_run for raw_tracepoint. Also, introduce a new feature that runs
the target program on a specific CPU. This is achieved by a new flag in
bpf_attr.test, BPF_F_TEST_RUN_ON_CPU. When this flag is set, the program
is triggered on cpu with id bpf_attr.test.cpu. This feature is needed for
BPF programs that handle perf_event and other percpu resources, as the
program can access these resource locally.

Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200925205432.1777-2-songliubraving@fb.com
2020-09-28 21:52:36 +02:00
Gustavo A. R. Silva df561f6688 treewide: Use fallthrough pseudo-keyword
Replace the existing /* fall through */ comments and its variants with
the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary
fall-through markings when it is the case.

[1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-08-23 17:36:59 -05:00
Dmitry Yakunin 21594c4408 bpf: Allow to specify ifindex for skb in bpf_prog_test_run_skb
Now skb->dev is unconditionally set to the loopback device in current net
namespace. But if we want to test bpf program which contains code branch
based on ifindex condition (eg filters out localhost packets) it is useful
to allow specifying of ifindex from userspace. This patch adds such option
through ctx_in (__sk_buff) parameter.

Signed-off-by: Dmitry Yakunin <zeil@yandex-team.ru>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200803090545.82046-3-zeil@yandex-team.ru
2020-08-03 23:32:23 +02:00
Dmitry Yakunin fa5cb548ce bpf: Setup socket family and addresses in bpf_prog_test_run_skb
Now it's impossible to test all branches of cgroup_skb bpf program which
accesses skb->family and skb->{local,remote}_ip{4,6} fields because they
are zeroed during socket allocation. This commit fills socket family and
addresses from related fields in constructed skb.

Signed-off-by: Dmitry Yakunin <zeil@yandex-team.ru>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200803090545.82046-2-zeil@yandex-team.ru
2020-08-03 23:31:59 +02:00
Yonghong Song d923021c2c bpf: Add tests for PTR_TO_BTF_ID vs. null comparison
Add two tests for PTR_TO_BTF_ID vs. null ptr comparison,
one for PTR_TO_BTF_ID in the ctx structure and the
other for PTR_TO_BTF_ID after one level pointer chasing.
In both cases, the test ensures condition is not
removed.

For example, for this test
 struct bpf_fentry_test_t {
     struct bpf_fentry_test_t *a;
 };
 int BPF_PROG(test7, struct bpf_fentry_test_t *arg)
 {
     if (arg == 0)
         test7_result = 1;
     return 0;
 }
Before the previous verifier change, we have xlated codes:
  int test7(long long unsigned int * ctx):
  ; int BPF_PROG(test7, struct bpf_fentry_test_t *arg)
     0: (79) r1 = *(u64 *)(r1 +0)
  ; int BPF_PROG(test7, struct bpf_fentry_test_t *arg)
     1: (b4) w0 = 0
     2: (95) exit
After the previous verifier change, we have:
  int test7(long long unsigned int * ctx):
  ; int BPF_PROG(test7, struct bpf_fentry_test_t *arg)
     0: (79) r1 = *(u64 *)(r1 +0)
  ; if (arg == 0)
     1: (55) if r1 != 0x0 goto pc+4
  ; test7_result = 1;
     2: (18) r1 = map[id:6][0]+48
     4: (b7) r2 = 1
     5: (7b) *(u64 *)(r1 +0) = r2
  ; int BPF_PROG(test7, struct bpf_fentry_test_t *arg)
     6: (b4) w0 = 0
     7: (95) exit

Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20200630171241.2523875-1-yhs@fb.com
2020-06-30 22:21:29 +02:00
Jesper Dangaard Brouer d800bad67d bpf: Fix too large copy from user in bpf_test_init
Commit bc56c919fc ("bpf: Add xdp.frame_sz in bpf_prog_test_run_xdp().")
recently changed bpf_prog_test_run_xdp() to use larger frames for XDP in
order to test tail growing frames (via bpf_xdp_adjust_tail) and to have
memory backing frame better resemble drivers.

The commit contains a bug, as it tries to copy the max data size from
userspace, instead of the size provided by userspace.  This cause XDP
unit tests to fail sporadically with EFAULT, an unfortunate behavior.
The fix is to only copy the size specified by userspace.

Fixes: bc56c919fc ("bpf: Add xdp.frame_sz in bpf_prog_test_run_xdp().")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/158980712729.256597.6115007718472928659.stgit@firesoul
2020-05-19 17:56:34 +02:00
Jesper Dangaard Brouer bc56c919fc bpf: Add xdp.frame_sz in bpf_prog_test_run_xdp().
Update the memory requirements, when adding xdp.frame_sz in BPF test_run
function bpf_prog_test_run_xdp() which e.g. is used by XDP selftests.

Specifically add the expected reserved tailroom, but also allocated a
larger memory area to reflect that XDP frames usually comes in this
format. Limit the provided packet data size to 4096 minus headroom +
tailroom, as this also reflect a common 3520 bytes MTU limit with XDP.

Note that bpf_test_init already use a memory allocation method that clears
memory.  Thus, this already guards against leaking uninit kernel memory.

Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/158945349549.97035.15316291762482444006.stgit@firesoul
2020-05-14 21:21:56 -07:00
Jean-Philippe Menil e9ff9d5254 bpf: Fix build warning regarding missing prototypes
Fix build warnings when building net/bpf/test_run.o with W=1 due
to missing prototype for bpf_fentry_test{1..6}.

Instead of declaring prototypes, turn off warnings with
__diag_{push,ignore,pop} as pointed out by Alexei.

Signed-off-by: Jean-Philippe Menil <jpmenil@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200327204713.28050-1-jpmenil@gmail.com
2020-03-28 18:13:18 +01:00
KP Singh 3d08b6f29c bpf: Add selftests for BPF_MODIFY_RETURN
Test for two scenarios:

  * When the fmod_ret program returns 0, the original function should
    be called along with fentry and fexit programs.
  * When the fmod_ret program returns a non-zero value, the original
    function should not be called, no side effect should be observed and
    fentry and fexit programs should be called.

The result from the kernel function call and whether a side-effect is
observed is returned via the retval attr of the BPF_PROG_TEST_RUN (bpf)
syscall.

Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200304191853.1529-8-kpsingh@chromium.org
2020-03-04 13:41:06 -08:00
KP Singh da00d2f117 bpf: Add test ops for BPF_PROG_TYPE_TRACING
The current fexit and fentry tests rely on a different program to
exercise the functions they attach to. Instead of doing this, implement
the test operations for tracing which will also be used for
BPF_MODIFY_RETURN in a subsequent patch.

Also, clean up the fexit test to use the generated skeleton.

Signed-off-by: KP Singh <kpsingh@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200304191853.1529-7-kpsingh@chromium.org
2020-03-04 13:41:06 -08:00
Willem de Bruijn cf62089b0e bpf: Add gso_size to __sk_buff
BPF programs may want to know whether an skb is gso. The canonical
answer is skb_is_gso(skb), which tests that gso_size != 0.

Expose this field in the same manner as gso_segs. That field itself
is not a sufficient signal, as the comment in skb_shared_info makes
clear: gso_segs may be zero, e.g., from dodgy sources.

Also prepare net/bpf/test_run for upcoming BPF_PROG_TEST_RUN tests
of the feature.

Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200303200503.226217-2-willemdebruijn.kernel@gmail.com
2020-03-03 16:23:59 -08:00
David Miller 6eac7795e8 bpf/tests: Use migrate disable instead of preempt disable
Replace the preemption disable/enable with migrate_disable/enable() to
reflect the actual requirement and to allow PREEMPT_RT to substitute it
with an actual migration disable mechanism which does not disable
preemption.

[ tglx: Switched it over to migrate disable ]

Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200224145643.785306549@linutronix.de
2020-02-24 16:20:09 -08:00
Nikita V. Shirokov 6de6c1f840 bpf: Allow to change skb mark in test_run
allow to pass skb's mark field into bpf_prog_test_run ctx
for BPF_PROG_TYPE_SCHED_CLS prog type. that would allow
to test bpf programs which are doing decision based on this
field

Signed-off-by: Nikita V. Shirokov <tehnerd@tehnerd.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-12-18 17:05:58 -08:00
Stanislav Fomichev 850a88cc40 bpf: Expose __sk_buff wire_len/gso_segs to BPF_PROG_TEST_RUN
wire_len should not be less than real len and is capped by GSO_MAX_SIZE.
gso_segs is capped by GSO_MAX_SEGS.

v2:
* set wire_len to skb->len when passed wire_len is 0 (Alexei Starovoitov)

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Cc: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191213223028.161282-1-sdf@google.com
2019-12-13 15:26:53 -08:00
Björn Töpel f23c4b3924 bpf: Start using the BPF dispatcher in BPF_TEST_RUN
In order to properly exercise the BPF dispatcher, this commit adds BPF
dispatcher usage to BPF_TEST_RUN when executing XDP programs.

Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191213175112.30208-5-bjorn.topel@gmail.com
2019-12-13 13:09:32 -08:00
Stanislav Fomichev b590cb5f80 bpf: Switch to offsetofend in BPF_PROG_TEST_RUN
Switch existing pattern of "offsetof(..., member) + FIELD_SIZEOF(...,
member)' to "offsetofend(..., member)" which does exactly what
we need without all the copy-paste.

Suggested-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191210191933.105321-1-sdf@google.com
2019-12-11 14:52:18 +01:00
Colin Ian King a25ecd9d1e bpf: Fix memory leak on object 'data'
The error return path on when bpf_fentry_test* tests fail does not
kfree 'data'. Fix this by adding the missing kfree.

Addresses-Coverity: ("Resource leak")

Fixes: faeb2dce08 ("bpf: Add kernel test functions for fentry testing")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191118114059.37287-1-colin.king@canonical.com
2019-11-18 19:32:59 -08:00
Alexei Starovoitov faeb2dce08 bpf: Add kernel test functions for fentry testing
Add few kernel functions with various number of arguments,
their types and sizes for BPF trampoline testing to cover
different calling conventions.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20191114185720.1641606-9-ast@kernel.org
2019-11-15 23:43:01 +01:00
Stanislav Fomichev ba94094818 bpf: Allow __sk_buff tstamp in BPF_PROG_TEST_RUN
It's useful for implementing EDT related tests (set tstamp, run the
test, see how the tstamp is changed or observe some other parameter).

Note that bpf_ktime_get_ns() helper is using monotonic clock, so for
the BPF programs that compare tstamp against it, tstamp should be
derived from clock_gettime(CLOCK_MONOTONIC, ...).

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20191015183125.124413-1-sdf@google.com
2019-10-15 16:24:26 -07:00
Stanislav Fomichev b2ca4e1cfa bpf/flow_dissector: support flags in BPF_PROG_TEST_RUN
This will allow us to write tests for those flags.

v2:
* Swap kfree(data) and kfree(user_ctx) (Song Liu)

Acked-by: Petar Penkov <ppenkov@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Petar Penkov <ppenkov@google.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-25 18:00:41 -07:00
Stanislav Fomichev 086f956821 bpf/flow_dissector: pass input flags to BPF flow dissector program
C flow dissector supports input flags that tell it to customize parsing
by either stopping early or trying to parse as deep as possible. Pass
those flags to the BPF flow dissector so it can make the same
decisions. In the next commits I'll add support for those flags to
our reference bpf_flow.c

v3:
* Export copy of flow dissector flags instead of moving (Alexei Starovoitov)

Acked-by: Petar Penkov <ppenkov@google.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Petar Penkov <ppenkov@google.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-07-25 18:00:41 -07:00
Thomas Gleixner 25763b3c86 treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 206
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of version 2 of the gnu general public license as
  published by the free software foundation

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 107 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528171438.615055994@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30 11:29:53 -07:00
Martin KaFai Lau 6ac99e8f23 bpf: Introduce bpf sk local storage
After allowing a bpf prog to
- directly read the skb->sk ptr
- get the fullsock bpf_sock by "bpf_sk_fullsock()"
- get the bpf_tcp_sock by "bpf_tcp_sock()"
- get the listener sock by "bpf_get_listener_sock()"
- avoid duplicating the fields of "(bpf_)sock" and "(bpf_)tcp_sock"
  into different bpf running context.

this patch is another effort to make bpf's network programming
more intuitive to do (together with memory and performance benefit).

When bpf prog needs to store data for a sk, the current practice is to
define a map with the usual 4-tuples (src/dst ip/port) as the key.
If multiple bpf progs require to store different sk data, multiple maps
have to be defined.  Hence, wasting memory to store the duplicated
keys (i.e. 4 tuples here) in each of the bpf map.
[ The smallest key could be the sk pointer itself which requires
  some enhancement in the verifier and it is a separate topic. ]

Also, the bpf prog needs to clean up the elem when sk is freed.
Otherwise, the bpf map will become full and un-usable quickly.
The sk-free tracking currently could be done during sk state
transition (e.g. BPF_SOCK_OPS_STATE_CB).

The size of the map needs to be predefined which then usually ended-up
with an over-provisioned map in production.  Even the map was re-sizable,
while the sk naturally come and go away already, this potential re-size
operation is arguably redundant if the data can be directly connected
to the sk itself instead of proxy-ing through a bpf map.

This patch introduces sk->sk_bpf_storage to provide local storage space
at sk for bpf prog to use.  The space will be allocated when the first bpf
prog has created data for this particular sk.

The design optimizes the bpf prog's lookup (and then optionally followed by
an inline update).  bpf_spin_lock should be used if the inline update needs
to be protected.

BPF_MAP_TYPE_SK_STORAGE:
-----------------------
To define a bpf "sk-local-storage", a BPF_MAP_TYPE_SK_STORAGE map (new in
this patch) needs to be created.  Multiple BPF_MAP_TYPE_SK_STORAGE maps can
be created to fit different bpf progs' needs.  The map enforces
BTF to allow printing the sk-local-storage during a system-wise
sk dump (e.g. "ss -ta") in the future.

The purpose of a BPF_MAP_TYPE_SK_STORAGE map is not for lookup/update/delete
a "sk-local-storage" data from a particular sk.
Think of the map as a meta-data (or "type") of a "sk-local-storage".  This
particular "type" of "sk-local-storage" data can then be stored in any sk.

The main purposes of this map are mostly:
1. Define the size of a "sk-local-storage" type.
2. Provide a similar syscall userspace API as the map (e.g. lookup/update,
   map-id, map-btf...etc.)
3. Keep track of all sk's storages of this "type" and clean them up
   when the map is freed.

sk->sk_bpf_storage:
------------------
The main lookup/update/delete is done on sk->sk_bpf_storage (which
is a "struct bpf_sk_storage").  When doing a lookup,
the "map" pointer is now used as the "key" to search on the
sk_storage->list.  The "map" pointer is actually serving
as the "type" of the "sk-local-storage" that is being
requested.

To allow very fast lookup, it should be as fast as looking up an
array at a stable-offset.  At the same time, it is not ideal to
set a hard limit on the number of sk-local-storage "type" that the
system can have.  Hence, this patch takes a cache approach.
The last search result from sk_storage->list is cached in
sk_storage->cache[] which is a stable sized array.  Each
"sk-local-storage" type has a stable offset to the cache[] array.
In the future, a map's flag could be introduced to do cache
opt-out/enforcement if it became necessary.

The cache size is 16 (i.e. 16 types of "sk-local-storage").
Programs can share map.  On the program side, having a few bpf_progs
running in the networking hotpath is already a lot.  The bpf_prog
should have already consolidated the existing sock-key-ed map usage
to minimize the map lookup penalty.  16 has enough runway to grow.

All sk-local-storage data will be removed from sk->sk_bpf_storage
during sk destruction.

bpf_sk_storage_get() and bpf_sk_storage_delete():
------------------------------------------------
Instead of using bpf_map_(lookup|update|delete)_elem(),
the bpf prog needs to use the new helper bpf_sk_storage_get() and
bpf_sk_storage_delete().  The verifier can then enforce the
ARG_PTR_TO_SOCKET argument.  The bpf_sk_storage_get() also allows to
"create" new elem if one does not exist in the sk.  It is done by
the new BPF_SK_STORAGE_GET_F_CREATE flag.  An optional value can also be
provided as the initial value during BPF_SK_STORAGE_GET_F_CREATE.
The BPF_MAP_TYPE_SK_STORAGE also supports bpf_spin_lock.  Together,
it has eliminated the potential use cases for an equivalent
bpf_map_update_elem() API (for bpf_prog) in this patch.

Misc notes:
----------
1. map_get_next_key is not supported.  From the userspace syscall
   perspective,  the map has the socket fd as the key while the map
   can be shared by pinned-file or map-id.

   Since btf is enforced, the existing "ss" could be enhanced to pretty
   print the local-storage.

   Supporting a kernel defined btf with 4 tuples as the return key could
   be explored later also.

2. The sk->sk_lock cannot be acquired.  Atomic operations is used instead.
   e.g. cmpxchg is done on the sk->sk_bpf_storage ptr.
   Please refer to the source code comments for the details in
   synchronization cases and considerations.

3. The mem is charged to the sk->sk_omem_alloc as the sk filter does.

Benchmark:
---------
Here is the benchmark data collected by turning on
the "kernel.bpf_stats_enabled" sysctl.
Two bpf progs are tested:

One bpf prog with the usual bpf hashmap (max_entries = 8192) with the
sk ptr as the key. (verifier is modified to support sk ptr as the key
That should have shortened the key lookup time.)

Another bpf prog is with the new BPF_MAP_TYPE_SK_STORAGE.

Both are storing a "u32 cnt", do a lookup on "egress_skb/cgroup" for
each egress skb and then bump the cnt.  netperf is used to drive
data with 4096 connected UDP sockets.

BPF_MAP_TYPE_HASH with a modifier verifier (152ns per bpf run)
27: cgroup_skb  name egress_sk_map  tag 74f56e832918070b run_time_ns 58280107540 run_cnt 381347633
    loaded_at 2019-04-15T13:46:39-0700  uid 0
    xlated 344B  jited 258B  memlock 4096B  map_ids 16
    btf_id 5

BPF_MAP_TYPE_SK_STORAGE in this patch (66ns per bpf run)
30: cgroup_skb  name egress_sk_stora  tag d4aa70984cc7bbf6 run_time_ns 25617093319 run_cnt 390989739
    loaded_at 2019-04-15T13:47:54-0700  uid 0
    xlated 168B  jited 156B  memlock 4096B  map_ids 17
    btf_id 6

Here is a high-level picture on how are the objects organized:

       sk
    ┌──────┐
    │      │
    │      │
    │      │
    │*sk_bpf_storage─────▶ bpf_sk_storage
    └──────┘                 ┌───────┐
                 ┌───────────┤ list  │
                 │           │       │
                 │           │       │
                 │           │       │
                 │           └───────┘
                 │
                 │     elem
                 │  ┌────────┐
                 ├─▶│ snode  │
                 │  ├────────┤
                 │  │  data  │          bpf_map
                 │  ├────────┤        ┌─────────┐
                 │  │map_node│◀─┬─────┤  list   │
                 │  └────────┘  │     │         │
                 │              │     │         │
                 │     elem     │     │         │
                 │  ┌────────┐  │     └─────────┘
                 └─▶│ snode  │  │
                    ├────────┤  │
   bpf_map          │  data  │  │
 ┌─────────┐        ├────────┤  │
 │  list   ├───────▶│map_node│  │
 │         │        └────────┘  │
 │         │                    │
 │         │           elem     │
 └─────────┘        ┌────────┐  │
                 ┌─▶│ snode  │  │
                 │  ├────────┤  │
                 │  │  data  │  │
                 │  ├────────┤  │
                 │  │map_node│◀─┘
                 │  └────────┘
                 │
                 │
                 │          ┌───────┐
     sk          └──────────│ list  │
  ┌──────┐                  │       │
  │      │                  │       │
  │      │                  │       │
  │      │                  └───────┘
  │*sk_bpf_storage───────▶bpf_sk_storage
  └──────┘

Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-27 09:07:04 -07:00
Matt Mullins e950e84336 selftests: bpf: test writable buffers in raw tps
This tests that:
  * a BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE cannot be attached if it
    uses either:
    * a variable offset to the tracepoint buffer, or
    * an offset beyond the size of the tracepoint buffer
  * a tracer can modify the buffer provided when attached to a writable
    tracepoint in bpf_prog_test_run

Signed-off-by: Matt Mullins <mmullins@fb.com>
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2019-04-26 19:04:19 -07:00
Stanislav Fomichev 02ee065836 bpf/flow_dissector: don't adjust nhoff by ETH_HLEN in BPF_PROG_TEST_RUN
Now that we use skb-less flow dissector let's return true nhoff and
thoff. We used to adjust them by ETH_HLEN because that's how it was
done in the skb case. For VLAN tests that looks confusing: nhoff is
pointing to vlan parts :-\

Warning, this is an API change for BPF_PROG_TEST_RUN! Feel free to drop
if you think that it's too late at this point to fix it.

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-23 18:36:35 +02:00
Stanislav Fomichev 7b8a130432 bpf: when doing BPF_PROG_TEST_RUN for flow dissector use no-skb mode
Now that we have bpf_flow_dissect which can work on raw data,
use it when doing BPF_PROG_TEST_RUN for flow dissector.

Simplifies bpf_prog_test_run_flow_dissector and allows us to
test no-skb mode.

Note, that previously, with bpf_flow_dissect_skb we used to call
eth_type_trans which pulled L2 (ETH_HLEN) header and we explicitly called
skb_reset_network_header. That means flow_keys->nhoff would be
initialized to 0 (skb_network_offset) in init_flow_keys.
Now we call bpf_flow_dissect with nhoff set to ETH_HLEN and need
to undo it once the dissection is done to preserve the existing behavior.

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-23 18:36:34 +02:00
Stanislav Fomichev 089b19a920 flow_dissector: switch kernel context to struct bpf_flow_dissector
struct bpf_flow_dissector has a small subset of sk_buff fields that
flow dissector BPF program is allowed to access and an optional
pointer to real skb. Real skb is used only in bpf_skb_load_bytes
helper to read non-linear data.

The real motivation for this is to be able to call flow dissector
from eth_get_headlen context where we don't have an skb and need
to dissect raw bytes.

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-23 18:36:33 +02:00
Stanislav Fomichev 947e8b595b bpf: explicitly prohibit ctx_{in, out} in non-skb BPF_PROG_TEST_RUN
This should allow us later to extend BPF_PROG_TEST_RUN for non-skb case
and be sure that nobody is erroneously setting ctx_{in,out}.

Fixes: b0b9395d86 ("bpf: support input __sk_buff context in BPF_PROG_TEST_RUN")
Reported-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-12 00:53:00 +02:00
Stanislav Fomichev b0b9395d86 bpf: support input __sk_buff context in BPF_PROG_TEST_RUN
Add new set of arguments to bpf_attr for BPF_PROG_TEST_RUN:
* ctx_in/ctx_size_in - input context
* ctx_out/ctx_size_out - output context

The intended use case is to pass some meta data to the test runs that
operate on skb (this has being brought up on recent LPC).

For programs that use bpf_prog_test_run_skb, support __sk_buff input and
output. Initially, from input __sk_buff, copy _only_ cb and priority into
skb, all other non-zero fields are prohibited (with EINVAL).
If the user has set ctx_out/ctx_size_out, copy the potentially modified
__sk_buff back to the userspace.

We require all fields of input __sk_buff except the ones we explicitly
support to be set to zero. The expectation is that in the future we might
add support for more fields and we want to fail explicitly if the user
runs the program on the kernel where we don't yet support them.

The API is intentionally vague (i.e. we don't explicitly add __sk_buff
to bpf_attr, but ctx_in) to potentially let other test_run types use
this interface in the future (this can be xdp_md for xdp types for
example).

v4:
  * don't copy more than allowed in bpf_ctx_init [Martin]

v3:
  * handle case where ctx_in is NULL, but ctx_out is not [Martin]
  * convert size==0 checks to ptr==NULL checks and add some extra ptr
    checks [Martin]

v2:
  * Addressed comments from Martin Lau

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-04-11 10:21:40 +02:00
Bo YU 71b91a506b bpf: fix warning about using plain integer as NULL
Sparse warning below:

sudo make C=2 CF=-D__CHECK_ENDIAN__ M=net/bpf/
CHECK   net/bpf//test_run.c
net/bpf//test_run.c:19:77: warning: Using plain integer as NULL pointer
./include/linux/bpf-cgroup.h:295:77: warning: Using plain integer as NULL pointer

Fixes: 8bad74f984 ("bpf: extend cgroup bpf core to allow multiple cgroup storage types")
Acked-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Bo YU <tsu.yubo@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-03-08 21:17:07 +01:00
David S. Miller f7fb7c1a1c Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:

====================
pull-request: bpf-next 2019-03-04

The following pull-request contains BPF updates for your *net-next* tree.

The main changes are:

1) Add AF_XDP support to libbpf. Rationale is to facilitate writing
   AF_XDP applications by offering higher-level APIs that hide many
   of the details of the AF_XDP uapi. Sample programs are converted
   over to this new interface as well, from Magnus.

2) Introduce a new cant_sleep() macro for annotation of functions
   that cannot sleep and use it in BPF_PROG_RUN() to assert that
   BPF programs run under preemption disabled context, from Peter.

3) Introduce per BPF prog stats in order to monitor the usage
   of BPF; this is controlled by kernel.bpf_stats_enabled sysctl
   knob where monitoring tools can make use of this to efficiently
   determine the average cost of programs, from Alexei.

4) Split up BPF selftest's test_progs similarly as we already
   did with test_verifier. This allows to further reduce merge
   conflicts in future and to get more structure into our
   quickly growing BPF selftest suite, from Stanislav.

5) Fix a bug in BTF's dedup algorithm which can cause an infinite
   loop in some circumstances; also various BPF doc fixes and
   improvements, from Andrii.

6) Various BPF sample cleanups and migration to libbpf in order
   to further isolate the old sample loader code (so we can get
   rid of it at some point), from Jakub.

7) Add a new BPF helper for BPF cgroup skb progs that allows
   to set ECN CE code point and a Host Bandwidth Manager (HBM)
   sample program for limiting the bandwidth used by v2 cgroups,
   from Lawrence.

8) Enable write access to skb->queue_mapping from tc BPF egress
   programs in order to let BPF pick TX queue, from Jesper.

9) Fix a bug in BPF spinlock handling for map-in-map which did
   not propagate spin_lock_off to the meta map, from Yonghong.

10) Fix a bug in the new per-CPU BPF prog counters to properly
    initialize stats for each CPU, from Eric.

11) Add various BPF helper prototypes to selftest's bpf_helpers.h,
    from Willem.

12) Fix various BPF samples bugs in XDP and tracing progs,
    from Toke, Daniel and Yonghong.

13) Silence preemption splat in test_bpf after BPF_PROG_RUN()
    enforces it now everywhere, from Anders.

14) Fix a signedness bug in libbpf's btf_dedup_ref_type() to
    get error handling working, from Dan.

15) Fix bpftool documentation and auto-completion with regards
    to stream_{verdict,parser} attach types, from Alban.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-04 10:14:31 -08:00
Stanislav Fomichev a439184d51 bpf/test_run: fix unkillable BPF_PROG_TEST_RUN for flow dissector
Syzbot found out that running BPF_PROG_TEST_RUN with repeat=0xffffffff
makes process unkillable. The problem is that when CONFIG_PREEMPT is
enabled, we never see need_resched() return true. This is due to the
fact that preempt_enable() (which we do in bpf_test_run_one on each
iteration) now handles resched if it's needed.

Let's disable preemption for the whole run, not per test. In this case
we can properly see whether resched is needed.
Let's also properly return -EINTR to the userspace in case of a signal
interrupt.

This is a follow up for a recently fixed issue in bpf_test_run, see
commit df1a2cb7c7 ("bpf/test_run: fix unkillable
BPF_PROG_TEST_RUN").

Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-25 22:21:22 +01:00
David S. Miller 70f3522614 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Three conflicts, one of which, for marvell10g.c is non-trivial and
requires some follow-up from Heiner or someone else.

The issue is that Heiner converted the marvell10g driver over to
use the generic c45 code as much as possible.

However, in 'net' a bug fix appeared which makes sure that a new
local mask (MDIO_AN_10GBT_CTRL_ADV_NBT_MASK) with value 0x01e0
is cleared.

Signed-off-by: David S. Miller <davem@davemloft.net>
2019-02-24 12:06:19 -08:00
Stanislav Fomichev df1a2cb7c7 bpf/test_run: fix unkillable BPF_PROG_TEST_RUN
Syzbot found out that running BPF_PROG_TEST_RUN with repeat=0xffffffff
makes process unkillable. The problem is that when CONFIG_PREEMPT is
enabled, we never see need_resched() return true. This is due to the
fact that preempt_enable() (which we do in bpf_test_run_one on each
iteration) now handles resched if it's needed.

Let's disable preemption for the whole run, not per test. In this case
we can properly see whether resched is needed.
Let's also properly return -EINTR to the userspace in case of a signal
interrupt.

See recent discussion:
http://lore.kernel.org/netdev/CAH3MdRWHr4N8jei8jxDppXjmw-Nw=puNDLbu1dQOFQHxfU2onA@mail.gmail.com

I'll follow up with the same fix bpf_prog_test_run_flow_dissector in
bpf-next.

Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-02-19 00:17:03 +01:00
Stanislav Fomichev b7a1848e83 bpf: add BPF_PROG_TEST_RUN support for flow dissector
The input is packet data, the output is struct bpf_flow_key. This should
make it easy to test flow dissector programs without elaborate
setup.

Signed-off-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2019-01-29 01:08:29 +01:00
David S. Miller addb067983 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:

====================
pull-request: bpf-next 2018-12-11

The following pull-request contains BPF updates for your *net-next* tree.

It has three minor merge conflicts, resolutions:

1) tools/testing/selftests/bpf/test_verifier.c

 Take first chunk with alignment_prevented_execution.

2) net/core/filter.c

  [...]
  case bpf_ctx_range_ptr(struct __sk_buff, flow_keys):
  case bpf_ctx_range(struct __sk_buff, wire_len):
        return false;
  [...]

3) include/uapi/linux/bpf.h

  Take the second chunk for the two cases each.

The main changes are:

1) Add support for BPF line info via BTF and extend libbpf as well
   as bpftool's program dump to annotate output with BPF C code to
   facilitate debugging and introspection, from Martin.

2) Add support for BPF_ALU | BPF_ARSH | BPF_{K,X} in interpreter
   and all JIT backends, from Jiong.

3) Improve BPF test coverage on archs with no efficient unaligned
   access by adding an "any alignment" flag to the BPF program load
   to forcefully disable verifier alignment checks, from David.

4) Add a new bpf_prog_test_run_xattr() API to libbpf which allows for
   proper use of BPF_PROG_TEST_RUN with data_out, from Lorenz.

5) Extend tc BPF programs to use a new __sk_buff field called wire_len
   for more accurate accounting of packets going to wire, from Petar.

6) Improve bpftool to allow dumping the trace pipe from it and add
   several improvements in bash completion and map/prog dump,
   from Quentin.

7) Optimize arm64 BPF JIT to always emit movn/movk/movk sequence for
   kernel addresses and add a dedicated BPF JIT backend allocator,
   from Ard.

8) Add a BPF helper function for IR remotes to report mouse movements,
   from Sean.

9) Various cleanups in BPF prog dump e.g. to make UAPI bpf_prog_info
   member naming consistent with existing conventions, from Yonghong
   and Song.

10) Misc cleanups and improvements in allowing to pass interface name
    via cmdline for xdp1 BPF example, from Matteo.

11) Fix a potential segfault in BPF sample loader's kprobes handling,
    from Daniel T.

12) Fix SPDX license in libbpf's README.rst, from Andrey.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-10 18:00:43 -08:00
Lorenz Bauer b5a36b1e1b bpf: respect size hint to BPF_PROG_TEST_RUN if present
Use data_size_out as a size hint when copying test output to user space.
ENOSPC is returned if the output buffer is too small.
Callers which so far did not set data_size_out are not affected.

Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-12-04 08:18:13 -08:00
Roman Gushchin dcb40590e6 bpf: refactor bpf_test_run() to separate own failures and test program result
After commit f42ee093be ("bpf/test_run: support cgroup local
storage") the bpf_test_run() function may fail with -ENOMEM, if
it's not possible to allocate memory for a cgroup local storage.

This error shouldn't be mixed with the return value of the testing
program. Let's add an additional argument with a pointer where to
store the testing program's result; and make bpf_test_run()
return either 0 or -ENOMEM.

Fixes: f42ee093be ("bpf/test_run: support cgroup local storage")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Suggested-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-12-01 12:33:58 -08:00
Song Liu 2cb494a36c bpf: add tests for direct packet access from CGROUP_SKB
Tests are added to make sure CGROUP_SKB cannot access:
  tc_classid, data_meta, flow_keys

and can read and write:
  mark, prority, and cb[0-4]

and can read other fields.

To make selftest with skb->sk work, a dummy sk is added in
bpf_prog_test_run_skb().

Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-10-19 13:49:34 -07:00
Roman Gushchin 8bad74f984 bpf: extend cgroup bpf core to allow multiple cgroup storage types
In order to introduce per-cpu cgroup storage, let's generalize
bpf cgroup core to support multiple cgroup storage types.
Potentially, per-node cgroup storage can be added later.

This commit is mostly a formal change that replaces
cgroup_storage pointer with a array of cgroup_storage pointers.
It doesn't actually introduce a new storage type,
it will be done later.

Each bpf program is now able to have one cgroup storage of each type.

Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Song Liu <songliubraving@fb.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-10-01 16:18:32 +02:00
Roman Gushchin f42ee093be bpf/test_run: support cgroup local storage
Allocate a temporary cgroup storage to use for bpf program test runs.

Because the test program is not actually attached to a cgroup,
the storage is allocated manually just for the execution
of the bpf program.

If the program is executed multiple times, the storage is not zeroed
on each run, emulating multiple runs of the program, attached to
a real cgroup.

Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-08-03 00:47:32 +02:00
Daniel Borkmann 6e6fddc783 bpf: fix panic due to oob in bpf_prog_test_run_skb
sykzaller triggered several panics similar to the below:

  [...]
  [  248.851531] BUG: KASAN: use-after-free in _copy_to_user+0x5c/0x90
  [  248.857656] Read of size 985 at addr ffff8808017ffff2 by task a.out/1425
  [...]
  [  248.865902] CPU: 1 PID: 1425 Comm: a.out Not tainted 4.18.0-rc4+ #13
  [  248.865903] Hardware name: Supermicro SYS-5039MS-H12TRF/X11SSE-F, BIOS 2.1a 03/08/2018
  [  248.865905] Call Trace:
  [  248.865910]  dump_stack+0xd6/0x185
  [  248.865911]  ? show_regs_print_info+0xb/0xb
  [  248.865913]  ? printk+0x9c/0xc3
  [  248.865915]  ? kmsg_dump_rewind_nolock+0xe4/0xe4
  [  248.865919]  print_address_description+0x6f/0x270
  [  248.865920]  kasan_report+0x25b/0x380
  [  248.865922]  ? _copy_to_user+0x5c/0x90
  [  248.865924]  check_memory_region+0x137/0x190
  [  248.865925]  kasan_check_read+0x11/0x20
  [  248.865927]  _copy_to_user+0x5c/0x90
  [  248.865930]  bpf_test_finish.isra.8+0x4f/0xc0
  [  248.865932]  bpf_prog_test_run_skb+0x6a0/0xba0
  [...]

After scrubbing the BPF prog a bit from the noise, turns out it called
bpf_skb_change_head() for the lwt_xmit prog with headroom of 2. Nothing
wrong in that, however, this was run with repeat >> 0 in bpf_prog_test_run_skb()
and the same skb thus keeps changing until the pskb_expand_head() called
from skb_cow() keeps bailing out in atomic alloc context with -ENOMEM.
So upon return we'll basically have 0 headroom left yet blindly do the
__skb_push() of 14 bytes and keep copying data from there in bpf_test_finish()
out of bounds. Fix to check if we have enough headroom and if pskb_expand_head()
fails, bail out with error.

Another bug independent of this fix (but related in triggering above) is
that BPF_PROG_TEST_RUN should be reworked to reset the skb/xdp buffer to
it's original state from input as otherwise repeating the same test in a
loop won't work for benchmarking when underlying input buffer is getting
changed by the prog each time and reused for the next run leading to
unexpected results.

Fixes: 1cf1cae963 ("bpf: introduce BPF_PROG_TEST_RUN command")
Reported-by: syzbot+709412e651e55ed96498@syzkaller.appspotmail.com
Reported-by: syzbot+54f39d6ab58f39720a55@syzkaller.appspotmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-07-11 16:10:57 -07:00
Nikita V. Shirokov 587b80cce9 bpf: making bpf_prog_test run aware of possible data_end ptr change
after introduction of bpf_xdp_adjust_tail helper packet length
could be changed not only if xdp->data pointer has been changed
but xdp->data_end as well. making bpf_prog_test_run aware of this
possibility

Signed-off-by: Nikita V. Shirokov <tehnerd@tehnerd.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-18 23:34:16 +02:00
Daniel Borkmann 65073a6733 bpf: fix null pointer deref in bpf_prog_test_run_xdp
syzkaller was able to generate the following XDP program ...

  (18) r0 = 0x0
  (61) r5 = *(u32 *)(r1 +12)
  (04) (u32) r0 += (u32) 0
  (95) exit

... and trigger a NULL pointer dereference in ___bpf_prog_run()
via bpf_prog_test_run_xdp() where this was attempted to run.

Reason is that recent xdp_rxq_info addition to XDP programs
updated all drivers, but not bpf_prog_test_run_xdp(), where
xdp_buff is set up. Thus when context rewriter does the deref
on the netdev it's NULL at runtime. Fix it by using xdp_rxq
from loopback dev. __netif_get_rx_queue() helper can also be
reused in various other locations later on.

Fixes: 02dd3291b2 ("bpf: finally expose xdp_rxq_info to XDP bpf-programs")
Reported-by: syzbot+1eb094057b338eb1fc00@syzkaller.appspotmail.com
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2018-02-01 07:43:56 -08:00
Daniel Borkmann de8f3a83b0 bpf: add meta pointer for direct access
This work enables generic transfer of metadata from XDP into skb. The
basic idea is that we can make use of the fact that the resulting skb
must be linear and already comes with a larger headroom for supporting
bpf_xdp_adjust_head(), which mangles xdp->data. Here, we base our work
on a similar principle and introduce a small helper bpf_xdp_adjust_meta()
for adjusting a new pointer called xdp->data_meta. Thus, the packet has
a flexible and programmable room for meta data, followed by the actual
packet data. struct xdp_buff is therefore laid out that we first point
to data_hard_start, then data_meta directly prepended to data followed
by data_end marking the end of packet. bpf_xdp_adjust_head() takes into
account whether we have meta data already prepended and if so, memmove()s
this along with the given offset provided there's enough room.

xdp->data_meta is optional and programs are not required to use it. The
rationale is that when we process the packet in XDP (e.g. as DoS filter),
we can push further meta data along with it for the XDP_PASS case, and
give the guarantee that a clsact ingress BPF program on the same device
can pick this up for further post-processing. Since we work with skb
there, we can also set skb->mark, skb->priority or other skb meta data
out of BPF, thus having this scratch space generic and programmable
allows for more flexibility than defining a direct 1:1 transfer of
potentially new XDP members into skb (it's also more efficient as we
don't need to initialize/handle each of such new members). The facility
also works together with GRO aggregation. The scratch space at the head
of the packet can be multiple of 4 byte up to 32 byte large. Drivers not
yet supporting xdp->data_meta can simply be set up with xdp->data_meta
as xdp->data + 1 as bpf_xdp_adjust_meta() will detect this and bail out,
such that the subsequent match against xdp->data for later access is
guaranteed to fail.

The verifier treats xdp->data_meta/xdp->data the same way as we treat
xdp->data/xdp->data_end pointer comparisons. The requirement for doing
the compare against xdp->data is that it hasn't been modified from it's
original address we got from ctx access. It may have a range marking
already from prior successful xdp->data/xdp->data_end pointer comparisons
though.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-26 13:36:44 -07:00
Daniel Borkmann 6aaae2b6c4 bpf: rename bpf_compute_data_end into bpf_compute_data_pointers
Just do the rename into bpf_compute_data_pointers() as we'll add
one more pointer here to recompute.

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-26 13:36:44 -07:00
David Miller 586f852597 bpf: Align packet data properly in program testing framework.
Make sure we apply NET_IP_ALIGN when reserving headroom for SKB
and XDP test runs, just like a real driver would.

Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
2017-05-02 11:46:28 -04:00
David Miller 78e5227237 bpf: Do not dereference user pointer in bpf_test_finish().
Instead, pass the kattr in which has a kernel side copy of this
data structure from userspace already.

Fix based upon a suggestion from Alexei Starovoitov.

Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
2017-05-02 11:46:28 -04:00
Alexei Starovoitov 1cf1cae963 bpf: introduce BPF_PROG_TEST_RUN command
development and testing of networking bpf programs is quite cumbersome.
Despite availability of user space bpf interpreters the kernel is
the ultimate authority and execution environment.
Current test frameworks for TC include creation of netns, veth,
qdiscs and use of various packet generators just to test functionality
of a bpf program. XDP testing is even more complicated, since
qemu needs to be started with gro/gso disabled and precise queue
configuration, transferring of xdp program from host into guest,
attaching to virtio/eth0 and generating traffic from the host
while capturing the results from the guest.

Moreover analyzing performance bottlenecks in XDP program is
impossible in virtio environment, since cost of running the program
is tiny comparing to the overhead of virtio packet processing,
so performance testing can only be done on physical nic
with another server generating traffic.

Furthermore ongoing changes to user space control plane of production
applications cannot be run on the test servers leaving bpf programs
stubbed out for testing.

Last but not least, the upstream llvm changes are validated by the bpf
backend testsuite which has no ability to test the code generated.

To improve this situation introduce BPF_PROG_TEST_RUN command
to test and performance benchmark bpf programs.

Joint work with Daniel Borkmann.

Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-04-01 12:45:57 -07:00