Граф коммитов

255 Коммитов

Автор SHA1 Сообщение Дата
Linus Torvalds 8c1b724ddb ARM:
* GICv4.1 support
 * 32bit host removal
 
 PPC:
 * secure (encrypted) using under the Protected Execution Framework
 ultravisor
 
 s390:
 * allow disabling GISA (hardware interrupt injection) and protected
 VMs/ultravisor support.
 
 x86:
 * New dirty bitmap flag that sets all bits in the bitmap when dirty
 page logging is enabled; this is faster because it doesn't require bulk
 modification of the page tables.
 * Initial work on making nested SVM event injection more similar to VMX,
 and less buggy.
 * Various cleanups to MMU code (though the big ones and related
 optimizations were delayed to 5.8).  Instead of using cr3 in function
 names which occasionally means eptp, KVM too has standardized on "pgd".
 * A large refactoring of CPUID features, which now use an array that
 parallels the core x86_features.
 * Some removal of pointer chasing from kvm_x86_ops, which will also be
 switched to static calls as soon as they are available.
 * New Tigerlake CPUID features.
 * More bugfixes, optimizations and cleanups.
 
 Generic:
 * selftests: cleanups, new MMU notifier stress test, steal-time test
 * CSV output for kvm_stat.
 
 KVM/MIPS has been broken since 5.5, it does not compile due to a patch committed
 by MIPS maintainers.  I had already prepared a fix, but the MIPS maintainers
 prefer to fix it in generic code rather than KVM so they are taking care of it.
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl6GOnIUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroMfxwf/ZKLZiRoaovXCOG71M/eHtQb8ZIqU
 3MPy+On3eC5Sk/aBxWUL9EFZsbYG6kYdbZ1VOvG9XPBoLlnkDSm/IR0kaELHtnjj
 oGVda/tvGn46Ne39y8xBptmb91WDcWH0vFthT/CwlMxAw3xjr+gG7Qyo+8F2CW6m
 SSSuLiHSBnyO1cQKruBTHZ8qnR8LlnfXEqtd6Y4LFLic0LbLIoIdRcT3wjQrcZrm
 Djd7wbTEYZjUfoqZ72ekwEDUsONcDLDSKcguDO9pSMSCGhpxCVT5Vy68KRpoIMs2
 nzNWDKjvqQo5zb2+GWxJgkd12Hv+n7PCXZMbVrWBu1pQsewUns9m4mkpGw==
 =6fGt
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm updates from Paolo Bonzini:
 "ARM:
   - GICv4.1 support

   - 32bit host removal

  PPC:
   - secure (encrypted) using under the Protected Execution Framework
     ultravisor

  s390:
   - allow disabling GISA (hardware interrupt injection) and protected
     VMs/ultravisor support.

  x86:
   - New dirty bitmap flag that sets all bits in the bitmap when dirty
     page logging is enabled; this is faster because it doesn't require
     bulk modification of the page tables.

   - Initial work on making nested SVM event injection more similar to
     VMX, and less buggy.

   - Various cleanups to MMU code (though the big ones and related
     optimizations were delayed to 5.8). Instead of using cr3 in
     function names which occasionally means eptp, KVM too has
     standardized on "pgd".

   - A large refactoring of CPUID features, which now use an array that
     parallels the core x86_features.

   - Some removal of pointer chasing from kvm_x86_ops, which will also
     be switched to static calls as soon as they are available.

   - New Tigerlake CPUID features.

   - More bugfixes, optimizations and cleanups.

  Generic:
   - selftests: cleanups, new MMU notifier stress test, steal-time test

   - CSV output for kvm_stat"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (277 commits)
  x86/kvm: fix a missing-prototypes "vmread_error"
  KVM: x86: Fix BUILD_BUG() in __cpuid_entry_get_reg() w/ CONFIG_UBSAN=y
  KVM: VMX: Add a trampoline to fix VMREAD error handling
  KVM: SVM: Annotate svm_x86_ops as __initdata
  KVM: VMX: Annotate vmx_x86_ops as __initdata
  KVM: x86: Drop __exit from kvm_x86_ops' hardware_unsetup()
  KVM: x86: Copy kvm_x86_ops by value to eliminate layer of indirection
  KVM: x86: Set kvm_x86_ops only after ->hardware_setup() completes
  KVM: VMX: Configure runtime hooks using vmx_x86_ops
  KVM: VMX: Move hardware_setup() definition below vmx_x86_ops
  KVM: x86: Move init-only kvm_x86_ops to separate struct
  KVM: Pass kvm_init()'s opaque param to additional arch funcs
  s390/gmap: return proper error code on ksm unsharing
  KVM: selftests: Fix cosmetic copy-paste error in vm_mem_region_move()
  KVM: Fix out of range accesses to memslots
  KVM: X86: Micro-optimize IPI fastpath delay
  KVM: X86: Delay read msr data iff writes ICR MSR
  KVM: PPC: Book3S HV: Add a capability for enabling secure guests
  KVM: arm64: GICv4.1: Expose HW-based SGIs in debugfs
  KVM: arm64: GICv4.1: Allow non-trapping WFI when using HW SGIs
  ...
2020-04-02 15:13:15 -07:00
Linus Torvalds 3cd86a58f7 arm64 updates for 5.7:
- In-kernel Pointer Authentication support (previously only offered to
   user space).
 
 - ARM Activity Monitors (AMU) extension support allowing better CPU
   utilisation numbers for the scheduler (frequency invariance).
 
 - Memory hot-remove support for arm64.
 
 - Lots of asm annotations (SYM_*) in preparation for the in-kernel
   Branch Target Identification (BTI) support.
 
 - arm64 perf updates: ARMv8.5-PMU 64-bit counters, refactoring the PMU
   init callbacks, support for new DT compatibles.
 
 - IPv6 header checksum optimisation.
 
 - Fixes: SDEI (software delegated exception interface) double-lock on
   hibernate with shared events.
 
 - Minor clean-ups and refactoring: cpu_ops accessor, cpu_do_switch_mm()
   converted to C, cpufeature finalisation helper.
 
 - sys_mremap() comment explaining the asymmetric address untagging
   behaviour.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAl6DVyIACgkQa9axLQDI
 XvHkqRAAiZA2EYKiQL4M1DJ1cNTADjT7xKX9+UtYBXj7GMVhgVWdunpHVE6qtfgk
 cT6avmKrS/6PDqizJgr+Z1yX8x3Kvs57G4BvmIUKIw97mkdewvFQ9JKv6VA1vb86
 7Qrl1WzqsGg5Kj9uUfI4h+ZoT1H4C/9PQeFxJwgZRtF9DxRh8O7VeZI+JCu8Aub2
 lIkjI8rh+EpTsGT9h/PMGWUcawnKQloZ1/F+GfMAuYBvIv2RNN2xVreJtTmm4NyJ
 VcpL0KCNyAI2lGdaJg5nBLRDyGuXDm5i+PLsCSXMquI4fie00txXeD8sjbeuO0ks
 YTJ0EhmUUhbSE17go+SxYiEFE0v09i+lD5ud+B4Vmojp0KTczTta9VSgURlbb2/9
 n9biq5G3PPDNIrZqiTT2Tf4AMz1350nkbzL2gzKecM5aIzR/u3y5yII5CgfZtFnj
 7bGbyFpFpcqI7UaISPsNCxmknbTt/7ff0WM3+7SbecxI3AD2mnxsOdN9JTLyhDp+
 owjyiaWxl5zMWF9DhplLG/9BKpNWSxh3skazdOdELd8GTq2MbJlXrVG2XgXTAOh3
 y1s6RQrfw8zXh8TSqdmmzauComXIRWTum/sbVB3U8Z3AUsIeq/NTSbN5X9JyIbOP
 HOabhlVhhkI6omN1grqPX4jwUiZLZoNfn7Ez4q71549KVK/uBtA=
 =LJVX
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Catalin Marinas:
 "The bulk is in-kernel pointer authentication, activity monitors and
  lots of asm symbol annotations. I also queued the sys_mremap() patch
  commenting the asymmetry in the address untagging.

  Summary:

   - In-kernel Pointer Authentication support (previously only offered
     to user space).

   - ARM Activity Monitors (AMU) extension support allowing better CPU
     utilisation numbers for the scheduler (frequency invariance).

   - Memory hot-remove support for arm64.

   - Lots of asm annotations (SYM_*) in preparation for the in-kernel
     Branch Target Identification (BTI) support.

   - arm64 perf updates: ARMv8.5-PMU 64-bit counters, refactoring the
     PMU init callbacks, support for new DT compatibles.

   - IPv6 header checksum optimisation.

   - Fixes: SDEI (software delegated exception interface) double-lock on
     hibernate with shared events.

   - Minor clean-ups and refactoring: cpu_ops accessor,
     cpu_do_switch_mm() converted to C, cpufeature finalisation helper.

   - sys_mremap() comment explaining the asymmetric address untagging
     behaviour"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (81 commits)
  mm/mremap: Add comment explaining the untagging behaviour of mremap()
  arm64: head: Convert install_el2_stub to SYM_INNER_LABEL
  arm64: Introduce get_cpu_ops() helper function
  arm64: Rename cpu_read_ops() to init_cpu_ops()
  arm64: Declare ACPI parking protocol CPU operation if needed
  arm64: move kimage_vaddr to .rodata
  arm64: use mov_q instead of literal ldr
  arm64: Kconfig: verify binutils support for ARM64_PTR_AUTH
  lkdtm: arm64: test kernel pointer authentication
  arm64: compile the kernel with ptrauth return address signing
  kconfig: Add support for 'as-option'
  arm64: suspend: restore the kernel ptrauth keys
  arm64: __show_regs: strip PAC from lr in printk
  arm64: unwind: strip PAC from kernel addresses
  arm64: mask PAC bits of __builtin_return_address
  arm64: initialize ptrauth keys for kernel booting task
  arm64: initialize and switch ptrauth kernel keys
  arm64: enable ptrauth earlier
  arm64: cpufeature: handle conflicts based on capability
  arm64: cpufeature: Move cpu capability helpers inside C file
  ...
2020-03-31 10:05:01 -07:00
Paolo Bonzini cf39d37539 KVM/arm updates for Linux 5.7
- GICv4.1 support
 - 32bit host removal
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAl6DKKIPHG1hekBrZXJu
 ZWwub3JnAAoJECPQ0LrRPXpDDe0P/30Oda6HJdcUY+g0dnHkH8N7t+VKjPPnihlX
 WBaT0Y4SzMsfAtG5lQqS48A50dXKWW70QvwkZjxu7abQhYFWGd2SGtTQxwqJXT8J
 I6MBh4r9xrIfiqzVT2BXslA6id5H6wCyyFI6vKm/IFkIu1J6JtwnKakQ0CIddS1d
 Blbgj5jcxGw+2xOppHCQXbWwwDdmYWkMZEBZjmhkezddqLDK+oaAUiUhHHHizTsB
 kLjgqYBVENpR1zDIsGpQAJloKXAiHfBQshQAmnhnBNzXE60LZ0n0/iODU9U5FDEO
 5j0DRWccKvsIMsUh7JpPr5xerGJ0rqk1IwPC2JcyzfRbvRLMpK1IOWfhI5Tg5lbP
 4Ev96QLEMBnKOWMSE0MqnMdq6JPzDLA6WZ28HZe2nc3/oWNgsSDtlXigx4xFFxTX
 zfc2YpAgFu3xJkPf8PtWTFvItm0AvFNFynPg0Rr/NsGf/FGeszYR4cLcHmv5NlWS
 IiV4+lgnlmr2LZr3VjUaumbtWIpuVF4Db5Al2K2E/PCN7ObfEkyCweDic8ophkH8
 sMS9TI38aH1Efy+I2Nfxxqpy8BcElZAMrAWt9R27A4JRLHdr7j5DsGnyRigXHgRe
 pFgbqtk/EjWkHwjaJVg8kPxf2+2P05VZsQeGG721nbKAIKDetM3RA2BflexdsptY
 kXplNsVr
 =eILh
 -----END PGP SIGNATURE-----

Merge tag 'kvmarm-5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm updates for Linux 5.7

- GICv4.1 support
- 32bit host removal
2020-03-31 10:44:53 -04:00
Catalin Marinas 0829a07695 Merge branch 'for-next/asm-annotations' into for-next/core
* for-next/asm-annotations:
  : Modernise arm64 assembly annotations
  arm64: head: Convert install_el2_stub to SYM_INNER_LABEL
  arm64: Mark call_smc_arch_workaround_1 as __maybe_unused
  arm64: entry-ftrace.S: Fix missing argument for CONFIG_FUNCTION_GRAPH_TRACER=y
  arm64: vdso32: Convert to modern assembler annotations
  arm64: vdso: Convert to modern assembler annotations
  arm64: sdei: Annotate SDEI entry points using new style annotations
  arm64: kvm: Modernize __smccc_workaround_1_smc_start annotations
  arm64: kvm: Modernize annotation for __bp_harden_hyp_vecs
  arm64: kvm: Annotate assembly using modern annoations
  arm64: kernel: Convert to modern annotations for assembly data
  arm64: head: Annotate stext and preserve_boot_args as code
  arm64: head.S: Convert to modern annotations for assembly functions
  arm64: ftrace: Modernise annotation of return_to_handler
  arm64: ftrace: Correct annotation of ftrace_caller assembly
  arm64: entry-ftrace.S: Convert to modern annotations for assembly functions
  arm64: entry: Additional annotation conversions for entry.S
  arm64: entry: Annotate ret_from_fork as code
  arm64: entry: Annotate vector table and handlers as code
  arm64: crypto: Modernize names for AES function macros
  arm64: crypto: Modernize some extra assembly annotations
2020-03-25 11:10:46 +00:00
Catalin Marinas da12d2739f Merge branches 'for-next/memory-hotremove', 'for-next/arm_sdei', 'for-next/amu', 'for-next/final-cap-helper', 'for-next/cpu_ops-cleanup', 'for-next/misc' and 'for-next/perf' into for-next/core
* for-next/memory-hotremove:
  : Memory hot-remove support for arm64
  arm64/mm: Enable memory hot remove
  arm64/mm: Hold memory hotplug lock while walking for kernel page table dump

* for-next/arm_sdei:
  : SDEI: fix double locking on return from hibernate and clean-up
  firmware: arm_sdei: clean up sdei_event_create()
  firmware: arm_sdei: Use cpus_read_lock() to avoid races with cpuhp
  firmware: arm_sdei: fix possible double-lock on hibernate error path
  firmware: arm_sdei: fix double-lock on hibernate with shared events

* for-next/amu:
  : ARMv8.4 Activity Monitors support
  clocksource/drivers/arm_arch_timer: validate arch_timer_rate
  arm64: use activity monitors for frequency invariance
  cpufreq: add function to get the hardware max frequency
  Documentation: arm64: document support for the AMU extension
  arm64/kvm: disable access to AMU registers from kvm guests
  arm64: trap to EL1 accesses to AMU counters from EL0
  arm64: add support for the AMU extension v1

* for-next/final-cap-helper:
  : Introduce cpus_have_final_cap_helper(), migrate arm64 KVM to it
  arm64: kvm: hyp: use cpus_have_final_cap()
  arm64: cpufeature: add cpus_have_final_cap()

* for-next/cpu_ops-cleanup:
  : cpu_ops[] access code clean-up
  arm64: Introduce get_cpu_ops() helper function
  arm64: Rename cpu_read_ops() to init_cpu_ops()
  arm64: Declare ACPI parking protocol CPU operation if needed

* for-next/misc:
  : Various fixes and clean-ups
  arm64: define __alloc_zeroed_user_highpage
  arm64/kernel: Simplify __cpu_up() by bailing out early
  arm64: remove redundant blank for '=' operator
  arm64: kexec_file: Fixed code style.
  arm64: add blank after 'if'
  arm64: fix spelling mistake "ca not" -> "cannot"
  arm64: entry: unmask IRQ in el0_sp()
  arm64: efi: add efi-entry.o to targets instead of extra-$(CONFIG_EFI)
  arm64: csum: Optimise IPv6 header checksum
  arch/arm64: fix typo in a comment
  arm64: remove gratuitious/stray .ltorg stanzas
  arm64: Update comment for ASID() macro
  arm64: mm: convert cpu_do_switch_mm() to C
  arm64: fix NUMA Kconfig typos

* for-next/perf:
  : arm64 perf updates
  arm64: perf: Add support for ARMv8.5-PMU 64-bit counters
  KVM: arm64: limit PMU version to PMUv3 for ARMv8.1
  arm64: cpufeature: Extract capped perfmon fields
  arm64: perf: Clean up enable/disable calls
  perf: arm-ccn: Use scnprintf() for robustness
  arm64: perf: Support new DT compatibles
  arm64: perf: Refactor PMU init callbacks
  perf: arm_spe: Remove unnecessary zero check on 'nr_pages'
2020-03-25 11:10:32 +00:00
Peter Xu 4d39576259 KVM: Remove unnecessary asm/kvm_host.h includes
Remove includes of asm/kvm_host.h from files that already include
linux/kvm_host.h to make it more obvious that there is no ordering issue
between the two headers.  linux/kvm_host.h includes asm/kvm_host.h to
pick up architecture specific settings, and this will never change, i.e.
including asm/kvm_host.h after linux/kvm_host.h may seem problematic,
but in practice is simply redundant.

Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-03-16 17:57:34 +01:00
Mark Rutland b5475d8cae arm64: kvm: hyp: use cpus_have_final_cap()
The KVM hyp code is only run after system capabilities have been
finalized, and thus all const cap checks have been patched. This is
noted in in __cpu_init_hyp_mode(), where we BUG() if called too early:

| /*
|  * Call initialization code, and switch to the full blown HYP code.
|  * If the cpucaps haven't been finalized yet, something has gone very
|  * wrong, and hyp will crash and burn when it uses any
|  * cpus_have_const_cap() wrapper.
|  */

Given this, the hyp code can use cpus_have_final_cap() and avoid
generating code to check the cpu_hwcaps array, which would be unsafe to
run in hyp context.

This patch migrate the KVM hyp code to cpus_have_final_cap(), avoiding
this redundant code generation, and making it possible to detect if we
accidentally invoke this code too early. In the latter case, the BUG()
in cpus_have_final_cap() will cause a hyp panic.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Julien Thierry <julien.thierry.kdev@gmail.com>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-03-13 17:34:28 +00:00
Mark Brown 4db61fef16 arm64: kvm: Modernize __smccc_workaround_1_smc_start annotations
In an effort to clarify and simplify the annotation of assembly functions
in the kernel new macros have been introduced. These replace ENTRY and
ENDPROC with separate annotations for standard C callable functions,
data and code with different calling conventions.

Using these for __smccc_workaround_1_smc is more involved than for most
symbols as this symbol is annotated quite unusually, rather than just have
the explicit symbol we define _start and _end symbols which we then use to
compute the length. This does not play at all nicely with the new style
macros. Instead define a constant for the size of the function and use that
in both the C code and for .org based size checks in the assembly code.

Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
2020-03-09 17:35:43 +00:00
Mark Brown 6e52aab901 arm64: kvm: Modernize annotation for __bp_harden_hyp_vecs
We have recently introduced new macros for annotating assembly symbols
for things that aren't C functions, SYM_CODE_START() and SYM_CODE_END(),
in an effort to clarify and simplify our annotations of assembly files.

Using these for __bp_harden_hyp_vecs is more involved than for most symbols
as this symbol is annotated quite unusually as rather than just have the
explicit symbol we define _start and _end symbols which we then use to
compute the length. This does not play at all nicely with the new style
macros. Since the size of the vectors is a known constant which won't vary
the simplest thing to do is simply to drop the separate _start and _end
symbols and just use a #define for the size.

Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
2020-03-09 17:35:35 +00:00
Mark Brown 617a2f392c arm64: kvm: Annotate assembly using modern annoations
In an effort to clarify and simplify the annotation of assembly functions
in the kernel new macros have been introduced. These replace ENTRY and
ENDPROC with separate annotations for standard C callable functions,
data and code with different calling conventions.  Update the more
straightforward annotations in the kvm code to the new macros.

Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
2020-03-09 17:35:29 +00:00
Ionela Voinescu 4fcdf106a4 arm64/kvm: disable access to AMU registers from kvm guests
Access to the AMU counters should be disabled by default in kvm guests,
as information from the counters might reveal activity in other guests
or activity on the host.

Therefore, disable access to AMU registers from EL0 and EL1 in kvm
guests by:
 - Hiding the presence of the extension in the feature register
   (SYS_ID_AA64PFR0_EL1) on the VCPU.
 - Disabling access to the AMU registers before switching to the guest.
 - Trapping accesses and injecting an undefined instruction into the
   guest.

Signed-off-by: Ionela Voinescu <ionela.voinescu@arm.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Valentin Schneider <valentin.schneider@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Julien Thierry <julien.thierry.kdev@gmail.com>
Cc: James Morse <james.morse@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2020-03-06 16:02:50 +00:00
Paolo Bonzini e951445f4d KVM/arm fixes for 5.6, take #1
- Fix compilation on 32bit
 - Move  VHE guest entry/exit into the VHE-specific entry code
 - Make sure all functions called by the non-VHE HYP code is tagged as __always_inline
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAl5VsNMPHG1hekBrZXJu
 ZWwub3JnAAoJECPQ0LrRPXpDLhUQAIsecO9IyYjy1J0Q5AxaKLL7NuKYlAaty2xX
 uY6UkTfPNsEaHFXSGYXWPDxrmkgArp2wuy4WVQB59Om00+LE7h9kiz7+xKpcUy1G
 UoHa5mzMlqoOeUIWO/oSU6LYHhYDnIpHTDco93YrscU4nNRevJZ/GVeuQeMblzuZ
 Sg7cWc+0V43FXUt9Jw8BsNhXH/D0l0p3v86p7GZLcSfFAccO62YfOwC8J/znLPym
 4S+O9RYQkCczvzFeQVYQwqImOAunaOb0OzERUbm8icOF6ekYGwywjrtlmAC/3q+q
 1g/te1yfwQ8fpprWl4QSH0sQVdfAcxdDZqcWtN2LhNaEShZtNa5yKpsRGn1V0eAS
 tIO8eexAKCXoASHrrwfSkizYjRAeDabmodBQmS50/isY9OdBE2tDel+BLrCjzBJ2
 hABwEZ3Q78216EuoqsZqWaEUZ3ck0iSW3IcXglmHE4TC8Iq6dwskvOPjay+msHr9
 dcHDCxFIN4jzv9QcpKN8LkxfmW0Us28bzap3OhKfrz0nv7b4n+j0q1xbKL1QnN/l
 RcDPW0dQeXuX9vYMeYIUDQcV4IgTUkF6IPDCRW7KCApi98HfPTbrfQ97nir79zDp
 pD8NXaNFr4PtxJoheYYia3sjZMt/fgfvP2dM32iOpsMu7W1FXdfQN7heNSc6MQmO
 ciyhf/mj
 =NpPo
 -----END PGP SIGNATURE-----

Merge tag 'kvmarm-fixes-5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm fixes for 5.6, take #1

- Fix compilation on 32bit
- Move  VHE guest entry/exit into the VHE-specific entry code
- Make sure all functions called by the non-VHE HYP code is tagged as __always_inline
2020-02-28 11:50:06 +01:00
James Morse 8c2d146ee7 KVM: arm64: Define our own swab32() to avoid a uapi static inline
KVM uses swab32() when mediating GIC MMIO accesses if the GICV is badly
aligned, and the host and guest differ in endianness.

arm64 doesn't provide a __arch_swab32(), so __fswab32() is always backed
by the macro implementation that the compiler reduces to a single
instruction. But the static-inline causes problems for KVM if the compiler
chooses not to inline this function, it may not be located in the
__hyp_text where __vgic_v2_perform_cpuif_access() needs it.

Create our own __kvm_swab32() macro that calls ___constant_swab32()
directly. This way we know it will always be inlined.

Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200220165839.256881-3-james.morse@arm.com
2020-02-22 11:01:47 +00:00
Mark Rutland b3f15ec3d8 kvm: arm/arm64: Fold VHE entry/exit work into kvm_vcpu_run_vhe()
With VHE, running a vCPU always requires the sequence:

1. kvm_arm_vhe_guest_enter();
2. kvm_vcpu_run_vhe();
3. kvm_arm_vhe_guest_exit()

... and as we invoke this from the shared arm/arm64 KVM code, 32-bit arm
has to provide stubs for all three functions.

To simplify the common code, and make it easier to make further
modifications to the arm64-specific portions in the near future, let's
fold kvm_arm_vhe_guest_enter() and kvm_arm_vhe_guest_exit() into
kvm_vcpu_run_vhe().

The 32-bit stubs for kvm_arm_vhe_guest_enter() and
kvm_arm_vhe_guest_exit() are removed, as they are no longer used. The
32-bit stub for kvm_vcpu_run_vhe() is left as-is.

There should be no functional change as a result of this patch.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20200210114757.2889-1-mark.rutland@arm.com
2020-02-17 14:38:37 +00:00
Linus Torvalds e813e65038 ARM: Cleanups and corner case fixes
PPC: Bugfixes
 
 x86:
 * Support for mapping DAX areas with large nested page table entries.
 * Cleanups and bugfixes here too.  A particularly important one is
 a fix for FPU load when the thread has TIF_NEED_FPU_LOAD.  There is
 also a race condition which could be used in guest userspace to exploit
 the guest kernel, for which the embargo expired today.
 * Fast path for IPI delivery vmexits, shaving about 200 clock cycles
 from IPI latency.
 * Protect against "Spectre-v1/L1TF" (bring data in the cache via
 speculative out of bound accesses, use L1TF on the sibling hyperthread
 to read it), which unfortunately is an even bigger whack-a-mole game
 than SpectreV1.
 
 Sean continues his mission to rewrite KVM.  In addition to a sizable
 number of x86 patches, this time he contributed a pretty large refactoring
 of vCPU creation that affects all architectures but should not have any
 visible effect.
 
 s390 will come next week together with some more x86 patches.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJeMxtCAAoJEL/70l94x66DQxIIAJv9hMmXLQHGFnUMskjGErR6
 DCLSC0YRdRMwE50CerblyJtGsMwGsPyHZwvZxoAceKJ9w0Yay9cyaoJ87ItBgHoY
 ce0HrqIUYqRSJ/F8WH2lSzkzMBr839rcmqw8p1tt4D5DIsYnxHGWwRaaP+5M/1KQ
 YKFu3Hea4L00U339iIuDkuA+xgz92LIbsn38svv5fxHhPAyWza0rDEYHNgzMKuoF
 IakLf5+RrBFAh6ZuhYWQQ44uxjb+uQa9pVmcqYzzTd5t1g4PV5uXtlJKesHoAvik
 Eba8IEUJn+HgQJjhp3YxQYuLeWOwRF3bwOiZ578MlJ4OPfYXMtbdlqCQANHOcGk=
 =H/q1
 -----END PGP SIGNATURE-----

Merge tag 'kvm-5.6-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:
 "This is the first batch of KVM changes.

  ARM:
   - cleanups and corner case fixes.

  PPC:
   - Bugfixes

  x86:
   - Support for mapping DAX areas with large nested page table entries.

   - Cleanups and bugfixes here too. A particularly important one is a
     fix for FPU load when the thread has TIF_NEED_FPU_LOAD. There is
     also a race condition which could be used in guest userspace to
     exploit the guest kernel, for which the embargo expired today.

   - Fast path for IPI delivery vmexits, shaving about 200 clock cycles
     from IPI latency.

   - Protect against "Spectre-v1/L1TF" (bring data in the cache via
     speculative out of bound accesses, use L1TF on the sibling
     hyperthread to read it), which unfortunately is an even bigger
     whack-a-mole game than SpectreV1.

  Sean continues his mission to rewrite KVM. In addition to a sizable
  number of x86 patches, this time he contributed a pretty large
  refactoring of vCPU creation that affects all architectures but should
  not have any visible effect.

  s390 will come next week together with some more x86 patches"

* tag 'kvm-5.6-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (204 commits)
  x86/KVM: Clean up host's steal time structure
  x86/KVM: Make sure KVM_VCPU_FLUSH_TLB flag is not missed
  x86/kvm: Cache gfn to pfn translation
  x86/kvm: Introduce kvm_(un)map_gfn()
  x86/kvm: Be careful not to clear KVM_VCPU_FLUSH_TLB bit
  KVM: PPC: Book3S PR: Fix -Werror=return-type build failure
  KVM: PPC: Book3S HV: Release lock on page-out failure path
  KVM: arm64: Treat emulated TVAL TimerValue as a signed 32-bit integer
  KVM: arm64: pmu: Only handle supported event counters
  KVM: arm64: pmu: Fix chained SW_INCR counters
  KVM: arm64: pmu: Don't mark a counter as chained if the odd one is disabled
  KVM: arm64: pmu: Don't increment SW_INCR if PMCR.E is unset
  KVM: x86: Use a typedef for fastop functions
  KVM: X86: Add 'else' to unify fastop and execute call path
  KVM: x86: inline memslot_valid_for_gpte
  KVM: x86/mmu: Use huge pages for DAX-backed files
  KVM: x86/mmu: Remove lpage_is_disallowed() check from set_spte()
  KVM: x86/mmu: Fold max_mapping_level() into kvm_mmu_hugepage_adjust()
  KVM: x86/mmu: Zap any compound page when collapsing sptes
  KVM: x86/mmu: Remove obsolete gfn restoration in FNAME(fetch)
  ...
2020-01-31 09:30:41 -08:00
Mark Brown 6645d8542e arm64: KVM: Annotate guest entry/exit as a single function
In an effort to clarify and simplify the annotations of assembly
functions in the kernel new macros have been introduced replacing ENTRY
and ENDPROC. There are separate annotations SYM_FUNC_ for normal C
functions and SYM_CODE_ for other code. Currently __guest_enter and
__guest_exit are annotated as standard functions but this is not
entirely correct as the former doesn't do a normal return and the latter
is not entered in a normal fashion. From the point of view of the
hypervisor the guest entry/exit may be viewed as a single
function which happens to have an eret in the middle of it so let's
annotate it as such.

Suggested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20200120124706.8681-1-broonie@kernel.org
2020-01-23 10:38:14 +00:00
Will Deacon ab3906c531 Merge branch 'for-next/errata' into for-next/core
* for-next/errata: (3 commits)
  arm64: Workaround for Cortex-A55 erratum 1530923
  ...
2020-01-22 11:35:05 +00:00
Will Deacon 4f6cdf296c Merge branches 'for-next/acpi', 'for-next/cpufeatures', 'for-next/csum', 'for-next/e0pd', 'for-next/entry', 'for-next/kbuild', 'for-next/kexec/cleanup', 'for-next/kexec/file-kdump', 'for-next/misc', 'for-next/nofpsimd', 'for-next/perf' and 'for-next/scs' into for-next/core
* for-next/acpi:
  ACPI/IORT: Fix 'Number of IDs' handling in iort_id_map()

* for-next/cpufeatures: (2 commits)
  arm64: Introduce ID_ISAR6 CPU register
  ...

* for-next/csum: (2 commits)
  arm64: csum: Fix pathological zero-length calls
  ...

* for-next/e0pd: (7 commits)
  arm64: kconfig: Fix alignment of E0PD help text
  ...

* for-next/entry: (5 commits)
  arm64: entry: cleanup sp_el0 manipulation
  ...

* for-next/kbuild: (4 commits)
  arm64: kbuild: remove compressed images on 'make ARCH=arm64 (dist)clean'
  ...

* for-next/kexec/cleanup: (11 commits)
  Revert "arm64: kexec: make dtb_mem always enabled"
  ...

* for-next/kexec/file-kdump: (2 commits)
  arm64: kexec_file: add crash dump support
  ...

* for-next/misc: (12 commits)
  arm64: entry: Avoid empty alternatives entries
  ...

* for-next/nofpsimd: (7 commits)
  arm64: nofpsmid: Handle TIF_FOREIGN_FPSTATE flag cleanly
  ...

* for-next/perf: (2 commits)
  perf/imx_ddr: Fix cpu hotplug state cleanup
  ...

* for-next/scs: (6 commits)
  arm64: kernel: avoid x18 in __cpu_soft_restart
  ...
2020-01-22 11:32:31 +00:00
Ard Biesheuvel af12376814 arm64: kvm: stop treating register x18 as caller save
In preparation of reserving x18, stop treating it as caller save in
the KVM guest entry/exit code. Currently, the code assumes there is
no need to preserve it for the host, given that it would have been
assumed clobbered anyway by the function call to __guest_enter().
Instead, preserve its value and restore it upon return.

Link: https://patchwork.kernel.org/patch/9836891/
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
[Sami: updated commit message, switched from x18 to x29 for the guest context]
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
2020-01-16 17:32:56 +00:00
Steven Price 275fa0ea2c arm64: Workaround for Cortex-A55 erratum 1530923
Cortex-A55 erratum 1530923 allows TLB entries to be allocated as a
result of a speculative AT instruction. This may happen in the middle of
a guest world switch while the relevant VMSA configuration is in an
inconsistent state, leading to erroneous content being allocated into
TLBs.

The same workaround as is used for Cortex-A76 erratum 1165522
(WORKAROUND_SPECULATIVE_AT_VHE) can be used here. Note that this
mandates the use of VHE on affected parts.

Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
2020-01-16 10:44:14 +00:00
Steven Price db0d46a58d arm64: Rename WORKAROUND_1319367 to SPECULATIVE_AT_NVHE
To match SPECULATIVE_AT_VHE let's also have a generic name for the NVHE
variant.

Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
2020-01-16 10:44:11 +00:00
Steven Price e85d68faed arm64: Rename WORKAROUND_1165522 to SPECULATIVE_AT_VHE
Cortex-A55 is affected by a similar erratum, so rename the existing
workaround for errarum 1165522 so it can be used for both errata.

Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
2020-01-16 10:43:53 +00:00
Suzuki K Poulose 52f73c383b arm64: nofpsmid: Handle TIF_FOREIGN_FPSTATE flag cleanly
We detect the absence of FP/SIMD after an incapable CPU is brought up,
and by then we have kernel threads running already with TIF_FOREIGN_FPSTATE set
which could be set for early userspace applications (e.g, modprobe triggered
from initramfs) and init. This could cause the applications to loop forever in
do_nofity_resume() as we never clear the TIF flag, once we now know that
we don't support FP.

Fix this by making sure that we clear the TIF_FOREIGN_FPSTATE flag
for tasks which may have them set, as we would have done in the normal
case, but avoiding touching the hardware state (since we don't support any).

Also to make sure we handle the cases seemlessly we categorise the
helper functions to two :
 1) Helpers for common core code, which calls into take appropriate
    actions without knowing the current FPSIMD state of the CPU/task.

    e.g fpsimd_restore_current_state(), fpsimd_flush_task_state(),
        fpsimd_save_and_flush_cpu_state().

    We bail out early for these functions, taking any appropriate actions
    (e.g, clearing the TIF flag) where necessary to hide the handling
    from core code.

 2) Helpers used when the presence of FP/SIMD is apparent.
    i.e, save/restore the FP/SIMD register state, modify the CPU/task
    FP/SIMD state.
    e.g,

    fpsimd_save(), task_fpsimd_load() - save/restore task FP/SIMD registers

    fpsimd_bind_task_to_cpu()  \
                                - Update the "state" metadata for CPU/task.
    fpsimd_bind_state_to_cpu() /

    fpsimd_update_current_state() - Update the fp/simd state for the current
                                    task from memory.

    These must not be called in the absence of FP/SIMD. Put in a WARNING
    to make sure they are not invoked in the absence of FP/SIMD.

KVM also uses the TIF_FOREIGN_FPSTATE flag to manage the FP/SIMD state
on the CPU. However, without FP/SIMD support we trap all accesses and
inject undefined instruction. Thus we should never "load" guest state.
Add a sanity check to make sure this is valid.

Fixes: 82e0191a1a ("arm64: Support systems without FP/ASIMD")
Cc: Will Deacon <will@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
2020-01-14 17:11:53 +00:00
Catalin Marinas 6be22809e5 Merge branches 'for-next/elf-hwcap-docs', 'for-next/smccc-conduit-cleanup', 'for-next/zone-dma', 'for-next/relax-icc_pmr_el1-sync', 'for-next/double-page-fault', 'for-next/misc', 'for-next/kselftest-arm64-signal' and 'for-next/kaslr-diagnostics' into for-next/core
* for-next/elf-hwcap-docs:
  : Update the arm64 ELF HWCAP documentation
  docs/arm64: cpu-feature-registers: Rewrite bitfields that don't follow [e, s]
  docs/arm64: cpu-feature-registers: Documents missing visible fields
  docs/arm64: elf_hwcaps: Document HWCAP_SB
  docs/arm64: elf_hwcaps: sort the HWCAP{, 2} documentation by ascending value

* for-next/smccc-conduit-cleanup:
  : SMC calling convention conduit clean-up
  firmware: arm_sdei: use common SMCCC_CONDUIT_*
  firmware/psci: use common SMCCC_CONDUIT_*
  arm: spectre-v2: use arm_smccc_1_1_get_conduit()
  arm64: errata: use arm_smccc_1_1_get_conduit()
  arm/arm64: smccc/psci: add arm_smccc_1_1_get_conduit()

* for-next/zone-dma:
  : Reintroduction of ZONE_DMA for Raspberry Pi 4 support
  arm64: mm: reserve CMA and crashkernel in ZONE_DMA32
  dma/direct: turn ARCH_ZONE_DMA_BITS into a variable
  arm64: Make arm64_dma32_phys_limit static
  arm64: mm: Fix unused variable warning in zone_sizes_init
  mm: refresh ZONE_DMA and ZONE_DMA32 comments in 'enum zone_type'
  arm64: use both ZONE_DMA and ZONE_DMA32
  arm64: rename variables used to calculate ZONE_DMA32's size
  arm64: mm: use arm64_dma_phys_limit instead of calling max_zone_dma_phys()

* for-next/relax-icc_pmr_el1-sync:
  : Relax ICC_PMR_EL1 (GICv3) accesses when ICC_CTLR_EL1.PMHE is clear
  arm64: Document ICC_CTLR_EL3.PMHE setting requirements
  arm64: Relax ICC_PMR_EL1 accesses when ICC_CTLR_EL1.PMHE is clear

* for-next/double-page-fault:
  : Avoid a double page fault in __copy_from_user_inatomic() if hw does not support auto Access Flag
  mm: fix double page fault on arm64 if PTE_AF is cleared
  x86/mm: implement arch_faults_on_old_pte() stub on x86
  arm64: mm: implement arch_faults_on_old_pte() on arm64
  arm64: cpufeature: introduce helper cpu_has_hw_af()

* for-next/misc:
  : Various fixes and clean-ups
  arm64: kpti: Add NVIDIA's Carmel core to the KPTI whitelist
  arm64: mm: Remove MAX_USER_VA_BITS definition
  arm64: mm: simplify the page end calculation in __create_pgd_mapping()
  arm64: print additional fault message when executing non-exec memory
  arm64: psci: Reduce the waiting time for cpu_psci_cpu_kill()
  arm64: pgtable: Correct typo in comment
  arm64: docs: cpu-feature-registers: Document ID_AA64PFR1_EL1
  arm64: cpufeature: Fix typos in comment
  arm64/mm: Poison initmem while freeing with free_reserved_area()
  arm64: use generic free_initrd_mem()
  arm64: simplify syscall wrapper ifdeffery

* for-next/kselftest-arm64-signal:
  : arm64-specific kselftest support with signal-related test-cases
  kselftest: arm64: fake_sigreturn_misaligned_sp
  kselftest: arm64: fake_sigreturn_bad_size
  kselftest: arm64: fake_sigreturn_duplicated_fpsimd
  kselftest: arm64: fake_sigreturn_missing_fpsimd
  kselftest: arm64: fake_sigreturn_bad_size_for_magic0
  kselftest: arm64: fake_sigreturn_bad_magic
  kselftest: arm64: add helper get_current_context
  kselftest: arm64: extend test_init functionalities
  kselftest: arm64: mangle_pstate_invalid_mode_el[123][ht]
  kselftest: arm64: mangle_pstate_invalid_daif_bits
  kselftest: arm64: mangle_pstate_invalid_compat_toggle and common utils
  kselftest: arm64: extend toplevel skeleton Makefile

* for-next/kaslr-diagnostics:
  : Provide diagnostics on boot for KASLR
  arm64: kaslr: Check command line before looking for a seed
  arm64: kaslr: Announce KASLR status on boot
2019-11-08 17:46:11 +00:00
Catalin Marinas 346f6a4636 Merge branch 'kvm-arm64/erratum-1319367' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into for-next/core
Similarly to erratum 1165522 that affects Cortex-A76, A57 and A72
respectively suffer from errata 1319537 and 1319367, potentially
resulting in TLB corruption if the CPU speculates an AT instruction
while switching guests.

The fix is slightly more involved since we don't have VHE to help us
here, but the idea is the same: when switching a guest in, we must
prevent any speculated AT from being able to parse the page tables
until S2 is up and running. Only at this stage can we allow AT to take
place.

For this, we always restore the guest sysregs first, except for its
SCTLR and TCR registers, which must be set with SCTLR.M=1 and
TCR.EPD{0,1} = {1, 1}, effectively disabling the PTW and TLB
allocation. Once S2 is setup, we restore the guest's SCTLR and
TCR. Similar things must be done on TLB invalidation...

* 'kvm-arm64/erratum-1319367' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms:
  arm64: Enable and document ARM errata 1319367 and 1319537
  arm64: KVM: Prevent speculative S1 PTW when restoring vcpu context
  arm64: KVM: Disable EL1 PTW when invalidating S2 TLBs
  arm64: KVM: Reorder system register restoration and stage-2 activation
  arm64: Add ARM64_WORKAROUND_1319367 for all A57 and A72 versions
2019-10-28 16:22:49 +00:00
Marc Zyngier bd227553ad arm64: KVM: Prevent speculative S1 PTW when restoring vcpu context
When handling erratum 1319367, we must ensure that the page table
walker cannot parse the S1 page tables while the guest is in an
inconsistent state. This is done as follows:

On guest entry:
- TCR_EL1.EPD{0,1} are set, ensuring that no PTW can occur
- all system registers are restored, except for TCR_EL1 and SCTLR_EL1
- stage-2 is restored
- SCTLR_EL1 and TCR_EL1 are restored

On guest exit:
- SCTLR_EL1.M and TCR_EL1.EPD{0,1} are set, ensuring that no PTW can occur
- stage-2 is disabled
- All host system registers are restored

Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-10-26 10:44:49 +01:00
Marc Zyngier 37553941c6 arm64: KVM: Disable EL1 PTW when invalidating S2 TLBs
When erratum 1319367 is being worked around, special care must
be taken not to allow the page table walker to populate TLBs
while we have the stage-2 translation enabled (which would otherwise
result in a bizare mix of the host S1 and the guest S2).

We enforce this by setting TCR_EL1.EPD{0,1} before restoring the S2
configuration, and clear the same bits after having disabled S2.

Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-10-26 10:43:53 +01:00
Marc Zyngier 1d8cd06af5 arm64: KVM: Reorder system register restoration and stage-2 activation
In order to prepare for handling erratum 1319367, we need to make
sure that all system registers (and most importantly the registers
configuring the virtual memory) are set before we enable stage-2
translation.

This results in a minor reorganisation of the load sequence, without
any functional change.

Reviewed-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-10-26 10:43:32 +01:00
Marc Zyngier f226650494 arm64: Relax ICC_PMR_EL1 accesses when ICC_CTLR_EL1.PMHE is clear
The GICv3 architecture specification is incredibly misleading when it
comes to PMR and the requirement for a DSB. It turns out that this DSB
is only required if the CPU interface sends an Upstream Control
message to the redistributor in order to update the RD's view of PMR.

This message is only sent when ICC_CTLR_EL1.PMHE is set, which isn't
the case in Linux. It can still be set from EL3, so some special care
is required. But the upshot is that in the (hopefuly large) majority
of the cases, we can drop the DSB altogether.

This relies on a new static key being set if the boot CPU has PMHE
set. The drawback is that this static key has to be exported to
modules.

Cc: Will Deacon <will@kernel.org>
Cc: James Morse <james.morse@arm.com>
Cc: Julien Thierry <julien.thierry.kdev@gmail.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-10-15 12:26:09 +01:00
Marc Zyngier d3ec3a08fa arm64: KVM: Trap VM ops when ARM64_WORKAROUND_CAVIUM_TX2_219_TVM is set
In order to workaround the TX2-219 erratum, it is necessary to trap
TTBRx_EL1 accesses to EL2. This is done by setting HCR_EL2.TVM on
guest entry, which has the side effect of trapping all the other
VM-related sysregs as well.

To minimize the overhead, a fast path is used so that we don't
have to go all the way back to the main sysreg handling code,
unless the rest of the hypervisor expects to see these accesses.

Cc: <stable@vger.kernel.org>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
2019-10-08 12:25:03 +01:00
Paolo Bonzini d53a4c8e77 KVM/arm fixes for 5.4, take #1
- Remove the now obsolete hyp_alternate_select construct
 - Fix the TRACE_INCLUDE_PATH macro in the vgic code
 -----BEGIN PGP SIGNATURE-----
 
 iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAl2TFyoPHG1hekBrZXJu
 ZWwub3JnAAoJECPQ0LrRPXpDROwP/inRUonz+KEG2B0Bx/NWtzdnDghxdcoNC9H6
 lVDHJ2dtC5Kmf0iHEualUvxXHYx7QJ3Maov3UAtkeYl3s4wC6TAl++QkqAG9PYsc
 lPQH4GBiQNewQyaebc/NKHDz3I3TClJDq57haHSFFiCwsUpJRgYL8WjktZD/Dide
 CUSQGxdnaALzHvMv5a8yQWadPL/RrXCZqOSKbUjjc20meZxrO66HwUd1G6uZZVDn
 VClMQwFkQzVjR7yX21/7gmTcwG99RqVaAsvOpCu9+MVlqSpDROspmSPMuG5X/usO
 zDgC07UFNPYHQKrGu8DHqlvO9DrK3vR8VEuKu+asVZP7D/ntvKhAM2c5ai188Z12
 w8rOnhJKnDtMGHXn4owcC9tgSfrPR+ZukaltzKRVVFm1Y1Io+qTkAuf3geFqZ1hj
 L9LWZ0KlMsFvfIKWPcAEp5rA9EeZoP5IeVCelBWj9ERDrcCMhma8RxpAlBPz1YPy
 J345jthE4xFZYQxV+amTKJ3CzbZPuU2iIKgDBYiG2PNCuKwCT46RQitOXWWTwSIb
 FZ6pcsmhofj69dSAlrRFjEpiLNkJuNX1ArsAA91vXemTXA2YfVLMZo1HkrmFNfbR
 j4HP1BhNVdCgk6HF2HzwdRt8eutvk889GG3q+uCoYCaSu3M8MUEgx64LurOPProO
 11jhNb3J
 =9luB
 -----END PGP SIGNATURE-----

Merge tag 'kvmarm-fixes-5.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm fixes for 5.4, take #1

- Remove the now obsolete hyp_alternate_select construct
- Fix the TRACE_INCLUDE_PATH macro in the vgic code
2019-10-03 12:08:50 +02:00
Linus Torvalds fe38bd6862 * s390: ioctl hardening, selftests
* ARM: ITS translation cache; support for 512 vCPUs, various cleanups
 and bugfixes
 
 * PPC: various minor fixes and preparation
 
 * x86: bugfixes all over the place (posted interrupts, SVM, emulation
 corner cases, blocked INIT), some IPI optimizations
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJdf7fdAAoJEL/70l94x66DJzkIAKDcuWXJB4Qtoto6yUvPiHZm
 LYkY/Dn1zulb/DhzrBoXFey/jZXwl9kxMYkVTefnrAl0fRwFGX+G1UYnQrtAL6Gr
 ifdTYdy3kZhXCnnp99QAantWDswJHo1THwbmHrlmkxS4MdisEaTHwgjaHrDRZ4/d
 FAEwW2isSonP3YJfTtsKFFjL9k2D4iMnwZ/R2B7UOaWvgnerZ1GLmOkilvnzGGEV
 IQ89IIkWlkKd4SKgq8RkDKlfW5JrLrSdTK2Uf0DvAxV+J0EFkEaR+WlLsqumra0z
 Eg3KwNScfQj0DyT0TzurcOxObcQPoMNSFYXLRbUu1+i0CGgm90XpF1IosiuihgU=
 =w6I3
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:
 "s390:
   - ioctl hardening
   - selftests

  ARM:
   - ITS translation cache
   - support for 512 vCPUs
   - various cleanups and bugfixes

  PPC:
   - various minor fixes and preparation

  x86:
   - bugfixes all over the place (posted interrupts, SVM, emulation
     corner cases, blocked INIT)
   - some IPI optimizations"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (75 commits)
  KVM: X86: Use IPI shorthands in kvm guest when support
  KVM: x86: Fix INIT signal handling in various CPU states
  KVM: VMX: Introduce exit reason for receiving INIT signal on guest-mode
  KVM: VMX: Stop the preemption timer during vCPU reset
  KVM: LAPIC: Micro optimize IPI latency
  kvm: Nested KVM MMUs need PAE root too
  KVM: x86: set ctxt->have_exception in x86_decode_insn()
  KVM: x86: always stop emulation on page fault
  KVM: nVMX: trace nested VM-Enter failures detected by H/W
  KVM: nVMX: add tracepoint for failed nested VM-Enter
  x86: KVM: svm: Fix a check in nested_svm_vmrun()
  KVM: x86: Return to userspace with internal error on unexpected exit reason
  KVM: x86: Add kvm_emulate_{rd,wr}msr() to consolidate VXM/SVM code
  KVM: x86: Refactor up kvm_{g,s}et_msr() to simplify callers
  doc: kvm: Fix return description of KVM_SET_MSRS
  KVM: X86: Tune PLE Window tracepoint
  KVM: VMX: Change ple_window type to unsigned int
  KVM: X86: Remove tailing newline for tracepoints
  KVM: X86: Trace vcpu_id for vmexit
  KVM: x86: Manually calculate reserved bits when loading PDPTRS
  ...
2019-09-18 09:49:13 -07:00
Linus Torvalds e77fafe9af arm64 updates for 5.4:
- 52-bit virtual addressing in the kernel
 
 - New ABI to allow tagged user pointers to be dereferenced by syscalls
 
 - Early RNG seeding by the bootloader
 
 - Improve robustness of SMP boot
 
 - Fix TLB invalidation in light of recent architectural clarifications
 
 - Support for i.MX8 DDR PMU
 
 - Remove direct LSE instruction patching in favour of static keys
 
 - Function error injection using kprobes
 
 - Support for the PPTT "thread" flag introduced by ACPI 6.3
 
 - Move PSCI idle code into proper cpuidle driver
 
 - Relaxation of implicit I/O memory barriers
 
 - Build with RELR relocations when toolchain supports them
 
 - Numerous cleanups and non-critical fixes
 -----BEGIN PGP SIGNATURE-----
 
 iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl1yYREQHHdpbGxAa2Vy
 bmVsLm9yZwAKCRC3rHDchMFjNAM3CAChqDFQkryXoHwdeEcaukMRVNxtxOi4pM4g
 5xqkb7PoqRJssIblsuhaXjrSD97yWCgaqCmFe6rKoes++lP4bFcTe22KXPPyPBED
 A+tK4nTuKKcZfVbEanUjI+ihXaHJmKZ/kwAxWsEBYZ4WCOe3voCiJVNO2fHxqg1M
 8TskZ2BoayTbWMXih0eJg2MCy/xApBq4b3nZG4bKI7Z9UpXiKN1NYtDh98ZEBK4V
 d/oNoHsJ2ZvIQsztoBJMsvr09DTCazCijWZiECadm6l41WEPFizngrACiSJLLtYo
 0qu4qxgg9zgFlvBCRQmIYSggTuv35RgXSfcOwChmW5DUjHG+f9GK
 =Ru4B
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Will Deacon:
 "Although there isn't tonnes of code in terms of line count, there are
  a fair few headline features which I've noted both in the tag and also
  in the merge commits when I pulled everything together.

  The part I'm most pleased with is that we had 35 contributors this
  time around, which feels like a big jump from the usual small group of
  core arm64 arch developers. Hopefully they all enjoyed it so much that
  they'll continue to contribute, but we'll see.

  It's probably worth highlighting that we've pulled in a branch from
  the risc-v folks which moves our CPU topology code out to where it can
  be shared with others.

  Summary:

   - 52-bit virtual addressing in the kernel

   - New ABI to allow tagged user pointers to be dereferenced by
     syscalls

   - Early RNG seeding by the bootloader

   - Improve robustness of SMP boot

   - Fix TLB invalidation in light of recent architectural
     clarifications

   - Support for i.MX8 DDR PMU

   - Remove direct LSE instruction patching in favour of static keys

   - Function error injection using kprobes

   - Support for the PPTT "thread" flag introduced by ACPI 6.3

   - Move PSCI idle code into proper cpuidle driver

   - Relaxation of implicit I/O memory barriers

   - Build with RELR relocations when toolchain supports them

   - Numerous cleanups and non-critical fixes"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (114 commits)
  arm64: remove __iounmap
  arm64: atomics: Use K constraint when toolchain appears to support it
  arm64: atomics: Undefine internal macros after use
  arm64: lse: Make ARM64_LSE_ATOMICS depend on JUMP_LABEL
  arm64: asm: Kill 'asm/atomic_arch.h'
  arm64: lse: Remove unused 'alt_lse' assembly macro
  arm64: atomics: Remove atomic_ll_sc compilation unit
  arm64: avoid using hard-coded registers for LSE atomics
  arm64: atomics: avoid out-of-line ll/sc atomics
  arm64: Use correct ll/sc atomic constraints
  jump_label: Don't warn on __exit jump entries
  docs/perf: Add documentation for the i.MX8 DDR PMU
  perf/imx_ddr: Add support for AXI ID filtering
  arm64: kpti: ensure patched kernel text is fetched from PoU
  arm64: fix fixmap copy for 16K pages and 48-bit VA
  perf/smmuv3: Validate groups for global filtering
  perf/smmuv3: Validate group size
  arm64: Relax Documentation/arm64/tagged-pointers.rst
  arm64: kvm: Replace hardcoded '1' with SYS_PAR_EL1_F
  arm64: mm: Ignore spurious translation faults taken from the kernel
  ...
2019-09-16 14:31:40 -07:00
Marc Zyngier aa979fa899 arm64: KVM: Replace hyp_alternate_select with has_vhe()
Given that the TLB invalidation path is pretty rarely used, there
was never any advantage to using hyp_alternate_select() here.
has_vhe(), being a glorified static key, is the right tool for
the job.

Off you go.

Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
2019-09-09 18:16:32 +01:00
Marc Zyngier b6749e20d5 arm64: KVM: Drop hyp_alternate_select for checking for ARM64_WORKAROUND_834220
There is no reason for using hyp_alternate_select when checking
for ARM64_WORKAROUND_834220, as each of the capabilities is
also backed by a static key. Just replace the KVM-specific
construct with cpus_have_const_cap(ARM64_WORKAROUND_834220).

Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
2019-09-09 18:16:32 +01:00
Will Deacon 5c062ef415 arm64: kvm: Replace hardcoded '1' with SYS_PAR_EL1_F
Now that we have a definition for the 'F' field of PAR_EL1, use that
instead of coding the immediate directly.

Acked-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
2019-08-27 17:38:41 +01:00
Mark Rutland 363de99b77 arm64/kvm: Remove VMID rollover I-cache maintenance
For VPIPT I-caches, we need I-cache maintenance on VMID rollover to
avoid an ABA problem. Consider a single vCPU VM, with a pinned stage-2,
running with an idmap VA->IPA and idmap IPA->PA. If we don't do
maintenance on rollover:

        // VMID A
        Writes insn X to PA 0xF
        Invalidates PA 0xF (for VMID A)

        I$ contains [{A,F}->X]

        [VMID ROLLOVER]

        // VMID B
        Writes insn Y to PA 0xF
        Invalidates PA 0xF (for VMID B)

        I$ contains [{A,F}->X, {B,F}->Y]

        [VMID ROLLOVER]

        // VMID A
        I$ contains [{A,F}->X, {B,F}->Y]

        Unexpectedly hits stale I$ line {A,F}->X.

However, for PIPT and VIPT I-caches, the VMID doesn't affect lookup or
constrain maintenance. Given the VMID doesn't affect PIPT and VIPT
I-caches, and given VMID rollover is independent of changes to stage-2
mappings, I-cache maintenance cannot be necessary on VMID rollover for
PIPT or VIPT I-caches.

This patch removes the maintenance on rollover for VIPT and PIPT
I-caches. At the same time, the unnecessary colons are removed from the
asm statement to make it more legible.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Reviewed-by: James Morse <james.morse@arm.com>
Cc: Julien Thierry <julien.thierry.kdev@gmail.com>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: kvmarm@lists.cs.columbia.edu
Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-08-18 18:41:12 +01:00
Anders Roxell cdb2d3ee04 arm64: KVM: hyp: debug-sr: Mark expected switch fall-through
When fall-through warnings was enabled by default the following warnings
was starting to show up:

../arch/arm64/kvm/hyp/debug-sr.c: In function ‘__debug_save_state’:
../arch/arm64/kvm/hyp/debug-sr.c:20:19: warning: this statement may fall
 through [-Wimplicit-fallthrough=]
  case 15: ptr[15] = read_debug(reg, 15);   \
../arch/arm64/kvm/hyp/debug-sr.c:113:2: note: in expansion of macro ‘save_debug’
  save_debug(dbg->dbg_bcr, dbgbcr, brps);
  ^~~~~~~~~~
../arch/arm64/kvm/hyp/debug-sr.c:21:2: note: here
  case 14: ptr[14] = read_debug(reg, 14);   \
  ^~~~
../arch/arm64/kvm/hyp/debug-sr.c:113:2: note: in expansion of macro ‘save_debug’
  save_debug(dbg->dbg_bcr, dbgbcr, brps);
  ^~~~~~~~~~
../arch/arm64/kvm/hyp/debug-sr.c:21:19: warning: this statement may fall
 through [-Wimplicit-fallthrough=]
  case 14: ptr[14] = read_debug(reg, 14);   \
../arch/arm64/kvm/hyp/debug-sr.c:113:2: note: in expansion of macro ‘save_debug’
  save_debug(dbg->dbg_bcr, dbgbcr, brps);
  ^~~~~~~~~~
../arch/arm64/kvm/hyp/debug-sr.c:22:2: note: here
  case 13: ptr[13] = read_debug(reg, 13);   \
  ^~~~
../arch/arm64/kvm/hyp/debug-sr.c:113:2: note: in expansion of macro ‘save_debug’
  save_debug(dbg->dbg_bcr, dbgbcr, brps);
  ^~~~~~~~~~

Rework to add a 'Fall through' comment where the compiler warned
about fall-through, hence silencing the warning.

Fixes: d93512ef0f0e ("Makefile: Globally enable fall-through warning")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
[maz: fixed commit message]
Signed-off-by: Marc Zyngier <maz@kernel.org>
2019-07-29 11:01:37 +01:00
Linus Torvalds 39d7530d74 ARM:
* support for chained PMU counters in guests
 * improved SError handling
 * handle Neoverse N1 erratum #1349291
 * allow side-channel mitigation status to be migrated
 * standardise most AArch64 system register accesses to msr_s/mrs_s
 * fix host MPIDR corruption on 32bit
 * selftests ckleanups
 
 x86:
 * PMU event {white,black}listing
 * ability for the guest to disable host-side interrupt polling
 * fixes for enlightened VMCS (Hyper-V pv nested virtualization),
 * new hypercall to yield to IPI target
 * support for passing cstate MSRs through to the guest
 * lots of cleanups and optimizations
 
 Generic:
 * Some txt->rST conversions for the documentation
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.22 (GNU/Linux)
 
 iQEcBAABAgAGBQJdJzdIAAoJEL/70l94x66DQDoH/i83/8kX4I8AWDlushPru4ts
 Q4lCE5VAPha+o4pLb1dtfFL3gTmSbsB1N++JSlqK3JOo6LphIOy6b0wBjQBbAa6U
 3CT1dJaHJoScLLj09vyBlvClGUH2ZKEQTWOiquCCf7JfPofxwPUA6vJ7TYsdkckx
 zR3ygbADWmnfS7hFfiqN3JzuYh9eoooGNWSU+Giq6VF41SiL3IqhBGZhWS0zE9c2
 2c5lpqqdeHmAYNBqsyzNiDRKp7+zLFSmZ7Z5/0L755L8KYwR6F5beTnmBMHvb4lA
 PWH/SWOC8EYR+PEowfrH+TxKZwp0gMn1kcAKjilHk0uCRwG1IzuHAr2jlNxICCk=
 =t/Oq
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull KVM updates from Paolo Bonzini:
 "ARM:
   - support for chained PMU counters in guests
   - improved SError handling
   - handle Neoverse N1 erratum #1349291
   - allow side-channel mitigation status to be migrated
   - standardise most AArch64 system register accesses to msr_s/mrs_s
   - fix host MPIDR corruption on 32bit
   - selftests ckleanups

  x86:
   - PMU event {white,black}listing
   - ability for the guest to disable host-side interrupt polling
   - fixes for enlightened VMCS (Hyper-V pv nested virtualization),
   - new hypercall to yield to IPI target
   - support for passing cstate MSRs through to the guest
   - lots of cleanups and optimizations

  Generic:
   - Some txt->rST conversions for the documentation"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (128 commits)
  Documentation: virtual: Add toctree hooks
  Documentation: kvm: Convert cpuid.txt to .rst
  Documentation: virtual: Convert paravirt_ops.txt to .rst
  KVM: x86: Unconditionally enable irqs in guest context
  KVM: x86: PMU Event Filter
  kvm: x86: Fix -Wmissing-prototypes warnings
  KVM: Properly check if "page" is valid in kvm_vcpu_unmap
  KVM: arm/arm64: Initialise host's MPIDRs by reading the actual register
  KVM: LAPIC: Retry tune per-vCPU timer_advance_ns if adaptive tuning goes insane
  kvm: LAPIC: write down valid APIC registers
  KVM: arm64: Migrate _elx sysreg accessors to msr_s/mrs_s
  KVM: doc: Add API documentation on the KVM_REG_ARM_WORKAROUNDS register
  KVM: arm/arm64: Add save/restore support for firmware workaround state
  arm64: KVM: Propagate full Spectre v2 workaround state to KVM guests
  KVM: arm/arm64: Support chained PMU counters
  KVM: arm/arm64: Remove pmc->bitmask
  KVM: arm/arm64: Re-create event when setting counter value
  KVM: arm/arm64: Extract duplicated code to own function
  KVM: arm/arm64: Rename kvm_pmu_{enable/disable}_counter functions
  KVM: LAPIC: ARBPRI is a reserved register for x2APIC
  ...
2019-07-12 15:35:14 -07:00
Linus Torvalds dfd437a257 arm64 updates for 5.3:
- arm64 support for syscall emulation via PTRACE_SYSEMU{,_SINGLESTEP}
 
 - Wire up VM_FLUSH_RESET_PERMS for arm64, allowing the core code to
   manage the permissions of executable vmalloc regions more strictly
 
 - Slight performance improvement by keeping softirqs enabled while
   touching the FPSIMD/SVE state (kernel_neon_begin/end)
 
 - Expose a couple of ARMv8.5 features to user (HWCAP): CondM (new XAFLAG
   and AXFLAG instructions for floating point comparison flags
   manipulation) and FRINT (rounding floating point numbers to integers)
 
 - Re-instate ARM64_PSEUDO_NMI support which was previously marked as
   BROKEN due to some bugs (now fixed)
 
 - Improve parking of stopped CPUs and implement an arm64-specific
   panic_smp_self_stop() to avoid warning on not being able to stop
   secondary CPUs during panic
 
 - perf: enable the ARM Statistical Profiling Extensions (SPE) on ACPI
   platforms
 
 - perf: DDR performance monitor support for iMX8QXP
 
 - cache_line_size() can now be set from DT or ACPI/PPTT if provided to
   cope with a system cache info not exposed via the CPUID registers
 
 - Avoid warning on hardware cache line size greater than
   ARCH_DMA_MINALIGN if the system is fully coherent
 
 - arm64 do_page_fault() and hugetlb cleanups
 
 - Refactor set_pte_at() to avoid redundant READ_ONCE(*ptep)
 
 - Ignore ACPI 5.1 FADTs reported as 5.0 (infer from the 'arm_boot_flags'
   introduced in 5.1)
 
 - CONFIG_RANDOMIZE_BASE now enabled in defconfig
 
 - Allow the selection of ARM64_MODULE_PLTS, currently only done via
   RANDOMIZE_BASE (and an erratum workaround), allowing modules to spill
   over into the vmalloc area
 
 - Make ZONE_DMA32 configurable
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEE5RElWfyWxS+3PLO2a9axLQDIXvEFAl0eHqcACgkQa9axLQDI
 XvFyNA/+L+bnkz8m3ncydlqqfXomQn4eJJVQ8Uksb0knJz+1+3CUxxbO4ry4jXZN
 fMkbggYrDPRKpDbsUl0lsRipj7jW9bqan+N37c3SWqCkgb6HqDaHViwxdx6Ec/Uk
 gHudozDSPh/8c7hxGcSyt/CFyuW6b+8eYIQU5rtIgz8aVY2BypBvS/7YtYCbIkx0
 w4CFleRTK1zXD5mJQhrc6jyDx659sVkrAvdhf6YIymOY8nBTv40vwdNo3beJMYp8
 Po/+0Ixu+VkHUNtmYYZQgP/AGH96xiTcRnUqd172JdtRPpCLqnLqwFokXeVIlUKT
 KZFMDPzK+756Ayn4z4huEePPAOGlHbJje8JVNnFyreKhVVcCotW7YPY/oJR10bnc
 eo7yD+DxABTn+93G2yP436bNVa8qO1UqjOBfInWBtnNFJfANIkZweij/MQ6MjaTA
 o7KtviHnZFClefMPoiI7HDzwL8XSmsBDbeQ04s2Wxku1Y2xUHLx4iLmadwLQ1ZPb
 lZMTZP3N/T1554MoURVA1afCjAwiqU3bt1xDUGjbBVjLfSPBAn/25IacsG9Li9AF
 7Rp1M9VhrfLftjFFkB2HwpbhRASOxaOSx+EI3kzEfCtM2O9I1WHgP3rvCdc3l0HU
 tbK0/IggQicNgz7GSZ8xDlWPwwSadXYGLys+xlMZEYd3pDIOiFc=
 =0TDT
 -----END PGP SIGNATURE-----

Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Catalin Marinas:

 - arm64 support for syscall emulation via PTRACE_SYSEMU{,_SINGLESTEP}

 - Wire up VM_FLUSH_RESET_PERMS for arm64, allowing the core code to
   manage the permissions of executable vmalloc regions more strictly

 - Slight performance improvement by keeping softirqs enabled while
   touching the FPSIMD/SVE state (kernel_neon_begin/end)

 - Expose a couple of ARMv8.5 features to user (HWCAP): CondM (new
   XAFLAG and AXFLAG instructions for floating point comparison flags
   manipulation) and FRINT (rounding floating point numbers to integers)

 - Re-instate ARM64_PSEUDO_NMI support which was previously marked as
   BROKEN due to some bugs (now fixed)

 - Improve parking of stopped CPUs and implement an arm64-specific
   panic_smp_self_stop() to avoid warning on not being able to stop
   secondary CPUs during panic

 - perf: enable the ARM Statistical Profiling Extensions (SPE) on ACPI
   platforms

 - perf: DDR performance monitor support for iMX8QXP

 - cache_line_size() can now be set from DT or ACPI/PPTT if provided to
   cope with a system cache info not exposed via the CPUID registers

 - Avoid warning on hardware cache line size greater than
   ARCH_DMA_MINALIGN if the system is fully coherent

 - arm64 do_page_fault() and hugetlb cleanups

 - Refactor set_pte_at() to avoid redundant READ_ONCE(*ptep)

 - Ignore ACPI 5.1 FADTs reported as 5.0 (infer from the
   'arm_boot_flags' introduced in 5.1)

 - CONFIG_RANDOMIZE_BASE now enabled in defconfig

 - Allow the selection of ARM64_MODULE_PLTS, currently only done via
   RANDOMIZE_BASE (and an erratum workaround), allowing modules to spill
   over into the vmalloc area

 - Make ZONE_DMA32 configurable

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (54 commits)
  perf: arm_spe: Enable ACPI/Platform automatic module loading
  arm_pmu: acpi: spe: Add initial MADT/SPE probing
  ACPI/PPTT: Add function to return ACPI 6.3 Identical tokens
  ACPI/PPTT: Modify node flag detection to find last IDENTICAL
  x86/entry: Simplify _TIF_SYSCALL_EMU handling
  arm64: rename dump_instr as dump_kernel_instr
  arm64/mm: Drop [PTE|PMD]_TYPE_FAULT
  arm64: Implement panic_smp_self_stop()
  arm64: Improve parking of stopped CPUs
  arm64: Expose FRINT capabilities to userspace
  arm64: Expose ARMv8.5 CondM capability to userspace
  arm64: defconfig: enable CONFIG_RANDOMIZE_BASE
  arm64: ARM64_MODULES_PLTS must depend on MODULES
  arm64: bpf: do not allocate executable memory
  arm64/kprobes: set VM_FLUSH_RESET_PERMS on kprobe instruction pages
  arm64/mm: wire up CONFIG_ARCH_HAS_SET_DIRECT_MAP
  arm64: module: create module allocations without exec permissions
  arm64: Allow user selection of ARM64_MODULE_PLTS
  acpi/arm64: ignore 5.1 FADTs that are reported as 5.0
  arm64: Allow selecting Pseudo-NMI again
  ...
2019-07-08 09:54:55 -07:00
Dave Martin fdec2a9ef8 KVM: arm64: Migrate _elx sysreg accessors to msr_s/mrs_s
Currently, the {read,write}_sysreg_el*() accessors for accessing
particular ELs' sysregs in the presence of VHE rely on some local
hacks and define their system register encodings in a way that is
inconsistent with the core definitions in <asm/sysreg.h>.

As a result, it is necessary to add duplicate definitions for any
system register that already needs a definition in sysreg.h for
other reasons.

This is a bit of a maintenance headache, and the reasons for the
_el*() accessors working the way they do is a bit historical.

This patch gets rid of the shadow sysreg definitions in
<asm/kvm_hyp.h>, converts the _el*() accessors to use the core
__msr_s/__mrs_s interface, and converts all call sites to use the
standard sysreg #define names (i.e., upper case, with SYS_ prefix).

This patch will conflict heavily anyway, so the opportunity
to clean up some bad whitespace in the context of the changes is
taken.

The change exposes a few system registers that have no sysreg.h
definition, due to msr_s/mrs_s being used in place of msr/mrs:
additions are made in order to fill in the gaps.

Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
Link: https://www.spinics.net/lists/kvm-arm/msg31717.html
[Rebased to v4.21-rc1]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
[Rebased to v5.2-rc5, changelog updates]
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-07-05 13:57:25 +01:00
James Morse 11b41626bd KVM: arm64: Skip more of the SError vaxorcism
During __guest_exit() we need to consume any SError left pending by the
guest so it doesn't contaminate the host. With v8.2 we use the
ESB-instruction. For systems without v8.2, we use dsb+isb and unmask
SError. We do this on every guest exit.

Use the same dsb+isr_el1 trick, this lets us know if an SError is pending
after the dsb, allowing us to skip the isb and self-synchronising PSTATE
write if its not.

This means SError remains masked during KVM's world-switch, so any SError
that occurs during this time is reported by the host, instead of causing
a hyp-panic.

As we're benchmarking this code lets polish the layout. If you give gcc
likely()/unlikely() hints in an if() condition, it shuffles the generated
assembly so that the likely case is immediately after the branch. Lets
do the same here.

Signed-off-by: James Morse <james.morse@arm.com>

Changes since v2:
 * Added isb after the dsb to prevent an early read

Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-07-05 13:03:34 +01:00
James Morse dad6321ffa KVM: arm64: Re-mask SError after the one instruction window
KVM consumes any SError that were pending during guest exit with a
dsb/isb and unmasking SError. It currently leaves SError unmasked for
the rest of world-switch.

This means any SError that occurs during this part of world-switch
will cause a hyp-panic. We'd much prefer it to remain pending until
we return to the host.

Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-07-05 13:03:34 +01:00
James Morse 5dcd0fdbb4 KVM: arm64: Defer guest entry when an asynchronous exception is pending
SError that occur during world-switch's entry to the guest will be
accounted to the guest, as the exception is masked until we enter the
guest... but we want to attribute the SError as precisely as possible.

Reading DISR_EL1 before guest entry requires free registers, and using
ESB+DISR_EL1 to consume and read back the ESR would leave KVM holding
a host SError... We would rather leave the SError pending and let the
host take it once we exit world-switch. To do this, we need to defer
guest-entry if an SError is pending.

Read the ISR to see if SError (or an IRQ) is pending. If so fake an
exit. Place this check between __guest_enter()'s save of the host
registers, and restore of the guest's. SError that occur between
here and the eret into the guest must have affected the guest's
registers, which we can naturally attribute to the guest.

The dsb is needed to ensure any previous writes have been done before
we read ISR_EL1. On systems without the v8.2 RAS extensions this
doesn't give us anything as we can't contain errors, and the ESR bits
to describe the severity are all implementation-defined. Replace
this with a nop for these systems.

Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-07-05 13:03:30 +01:00
James Morse 0e5b9c085d KVM: arm64: Consume pending SError as early as possible
On systems with v8.2 we switch the 'vaxorcism' of guest SError with an
alternative sequence that uses the ESB-instruction, then reads DISR_EL1.
This saves the unmasking and remasking of asynchronous exceptions.

We do this after we've saved the guest registers and restored the
host's. Any SError that becomes pending due to this will be accounted
to the guest, when it actually occurred during host-execution.

Move the ESB-instruction as early as possible. Any guest SError
will become pending due to this ESB-instruction and then consumed to
DISR_EL1 before the host touches anything.

This lets us account for host/guest SError precisely on the guest
exit exception boundary.

Because the ESB-instruction now lands in the preamble section of
the vectors, we need to add it to the unpatched indirect vectors
too, and to any sequence that may be patched in over the top.

The ESB-instruction always lives in the head of the vectors,
to be before any memory write. Whereas the register-store always
lives in the tail.

Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-07-05 13:03:29 +01:00
James Morse 5d994374e8 KVM: arm64: Make indirect vectors preamble behaviour symmetric
The KVM indirect vectors support is a little complicated. Different CPUs
may use different exception vectors for KVM that are generated at boot.
Adding new instructions involves checking all the possible combinations
do the right thing.

To make changes here easier to review lets state what we expect of the
preamble:
  1. The first vector run, must always run the preamble.
  2. Patching the head or tail of the vector shouldn't remove
     preamble instructions.

Today, this is easy as we only have one instruction in the preamble.
Change the unpatched tail of the indirect vector so that it always
runs this, regardless of patching.

Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-07-05 13:03:29 +01:00
James Morse 3dbf100b0b KVM: arm64: Abstract the size of the HYP vectors pre-amble
The EL2 vector hardening feature causes KVM to generate vectors for
each type of CPU present in the system. The generated sequences already
do some of the early guest-exit work (i.e. saving registers). To avoid
duplication the generated vectors branch to the original vector just
after the preamble. This size is hard coded.

Adding new instructions to the HYP vector causes strange side effects,
which are difficult to debug as the affected code is patched in at
runtime.

Add KVM_VECTOR_PREAMBLE to tell kvm_patch_vector_branch() how big
the preamble is. The valid_vect macro can then validate this at
build time.

Reviewed-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-07-05 13:03:29 +01:00
Julien Thierry bd82d4bd21 arm64: Fix incorrect irqflag restore for priority masking
When using IRQ priority masking to disable interrupts, in order to deal
with the PSR.I state, local_irq_save() would convert the I bit into a
PMR value (GIC_PRIO_IRQOFF). This resulted in local_irq_restore()
potentially modifying the value of PMR in undesired location due to the
state of PSR.I upon flag saving [1].

In an attempt to solve this issue in a less hackish manner, introduce
a bit (GIC_PRIO_IGNORE_PMR) for the PMR values that can represent
whether PSR.I is being used to disable interrupts, in which case it
takes precedence of the status of interrupt masking via PMR.

GIC_PRIO_PSR_I_SET is chosen such that (<pmr_value> |
GIC_PRIO_PSR_I_SET) does not mask more interrupts than <pmr_value> as
some sections (e.g. arch_cpu_idle(), interrupt acknowledge path)
requires PMR not to mask interrupts that could be signaled to the
CPU when using only PSR.I.

[1] https://www.spinics.net/lists/arm-kernel/msg716956.html

Fixes: 4a503217ce ("arm64: irqflags: Use ICC_PMR_EL1 for interrupt masking")
Cc: <stable@vger.kernel.org> # 5.1.x-
Reported-by: Zenghui Yu <yuzenghui@huawei.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Wei Li <liwei391@huawei.com>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Christoffer Dall <christoffer.dall@arm.com>
Cc: James Morse <james.morse@arm.com>
Cc: Suzuki K Pouloze <suzuki.poulose@arm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Julien Thierry <julien.thierry@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2019-06-21 15:50:10 +01:00
Thomas Gleixner caab277b1d treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 234
Based on 1 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation this program is
  distributed in the hope that it will be useful but without any
  warranty without even the implied warranty of merchantability or
  fitness for a particular purpose see the gnu general public license
  for more details you should have received a copy of the gnu general
  public license along with this program if not see http www gnu org
  licenses

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 503 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Enrico Weigelt <info@metux.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190602204653.811534538@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:07 +02:00
James Morse 623e1528d4 KVM: arm/arm64: Move cc/it checks under hyp's Makefile to avoid instrumentation
KVM has helpers to handle the condition codes of trapped aarch32
instructions. These are marked __hyp_text and used from HYP, but they
aren't built by the 'hyp' Makefile, which has all the runes to avoid ASAN
and KCOV instrumentation.

Move this code to a new hyp/aarch32.c to avoid a hyp-panic when starting
an aarch32 guest on a host built with the ASAN/KCOV debug options.

Fixes: 021234ef37 ("KVM: arm64: Make kvm_condition_valid32() accessible from EL2")
Fixes: 8cebe750c4 ("arm64: KVM: Make kvm_skip_instr32 available to HYP")
Signed-off-by: James Morse <james.morse@arm.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
2019-05-24 14:53:20 +01:00