The Tegra DRM driver heavily relies on the implementations for runtime
suspend/resume to be called at specific times. Unfortunately, there are
some cases where that doesn't work. One example is if the user disables
runtime PM for a given subdevice. Another example is that the PM core
acquires a reference to runtime PM during system sleep, effectively
preventing devices from going into low power modes. This is intentional
to avoid nasty race conditions, but it also causes system sleep to not
function properly on all Tegra systems.
Fix this by not implementing runtime PM at all. Instead, a minimal,
reference-counted suspend/resume infrastructure is added to the host1x
bus. This has the benefit that it can be used regardless of the system
power state (or any transitions we might be in), or whether or not the
user allows runtime PM.
Atomic modesetting guarantees that these functions will end up being
called at the right point in time, so the pitfalls for the more generic
runtime PM do not apply here.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Rename the host1x clients' parent to "host" because that more closely
describes what it is. The parent can be confused with the parent device
in terms of the device hierarchy. Subsequent patches will add a new
member that refers to the parent in that hierarchy.
Signed-off-by: Thierry Reding <treding@nvidia.com>
host1x nor any its clients have any limitations on the DMA segment size,
so don't pretend that they do.
Signed-off-by: Thierry Reding <treding@nvidia.com>
This contains a couple of small improvements and cleanups for the Tegra
DRM driver.
-----BEGIN PGP SIGNATURE-----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=T2hU
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-5.3-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v5.3-rc1
This contains a couple of small improvements and cleanups for the Tegra
DRM driver.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190621150753.19550-1-thierry.reding@gmail.com
Logical devices created by the host1x bus infrastructure don't need to
be associated with a device tree node. Doing so will cause the driver
core to attempt to hook up IOMMU operations and fail because it is not
a real device.
However, for backwards-compatibility, we need to provide various OF_*
uevent variables that were previously provided by of_device_uevent() and
which are parsed by libdrm in userspace when querying the available
devices. Do this by implementing a uevent callback for the host1x bus.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Recent versions of the DMA API debug code have started to warn about
violations of the maximum DMA segment size. This is because the segment
size defaults to 64 KiB, which can easily be exceeded in large buffer
allocations such as used in DRM/KMS for framebuffers.
Technically the Tegra SMMU and ARM SMMU don't have a maximum segment
size (they map individual pages irrespective of whether they are
contiguous or not), so the choice of 4 MiB is a bit arbitrary here. The
maximum segment size is a 32-bit unsigned integer, though, so we can't
set it to the correct maximum size, which would be the size of the
aperture.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Based on 1 normalized pattern(s):
this program is free software you can redistribute it and or modify
it under the terms and conditions of the gnu general public license
version 2 as published by the free software foundation this program
is distributed in the hope it will be useful but without any
warranty without even the implied warranty of merchantability or
fitness for a particular purpose see the gnu general public license
for more details you should have received a copy of the gnu general
public license along with this program if not see http www gnu org
licenses
extracted by the scancode license scanner the SPDX license identifier
GPL-2.0-only
has been chosen to replace the boilerplate/reference in 228 file(s).
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Allison Randal <allison@lohutok.net>
Reviewed-by: Steve Winslow <swinslow@gmail.com>
Reviewed-by: Richard Fontana <rfontana@redhat.com>
Reviewed-by: Alexios Zavras <alexios.zavras@intel.com>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190528171438.107155473@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This new debugfs file represents the state of host1x bus devices,
specifying the list of subdevices and marking which ones have
successfully registered.
Signed-off-by: Thierry Reding <treding@nvidia.com>
All other assignments have a single space around the = sign, so remove
the spurious tab for consistency.
Signed-off-by: Thierry Reding <treding@nvidia.com>
With each bus implementing its own DMA configuration callback, there is no
need for bus to explicitly set the force_dma flag. Modify the
of_dma_configure function to accept an input parameter which specifies if
implicit DMA configuration is required when it is not described by the
firmware.
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # PCI parts
Reviewed-by: Rob Herring <robh@kernel.org>
[hch: tweaked the changelog a bit]
Signed-off-by: Christoph Hellwig <hch@lst.de>
ACPI/OF support for configuration of DMA is a bus specific aspect, and
thus should be configured by the bus. Introduces a 'dma_configure' bus
method so that busses can control their DMA capabilities.
Also update the PCI, Platform, ACPI and host1x buses to use the new
method.
Suggested-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Nipun Gupta <nipun.gupta@nxp.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # PCI parts
Acked-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[hch: simplified host1x_dma_configure based on a comment from Thierry,
rewrote changelog]
Signed-off-by: Christoph Hellwig <hch@lst.de>
When an error happens during the initialization of one of the sub-
devices, make sure to properly cleanup all sub-devices that have been
initialized up to that point.
Signed-off-by: Thierry Reding <treding@nvidia.com>
-----BEGIN PGP SIGNATURE-----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=xVV2
-----END PGP SIGNATURE-----
Merge tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linux
Pull drm updates from Dave Airlie:
"This is the main drm pull request for v4.15.
Core:
- Atomic object lifetime fixes
- Atomic iterator improvements
- Sparse/smatch fixes
- Legacy kms ioctls to be interruptible
- EDID override improvements
- fb/gem helper cleanups
- Simple outreachy patches
- Documentation improvements
- Fix dma-buf rcu races
- DRM mode object leasing for improving VR use cases.
- vgaarb improvements for non-x86 platforms.
New driver:
- tve200: Faraday Technology TVE200 block.
This "TV Encoder" encodes a ITU-T BT.656 stream and can be found in
the StorLink SL3516 (later Cortina Systems CS3516) as well as the
Grain Media GM8180.
New bridges:
- SiI9234 support
New panels:
- S6E63J0X03, OTM8009A, Seiko 43WVF1G, 7" rpi touch panel, Toshiba
LT089AC19000, Innolux AT043TN24
i915:
- Remove Coffeelake from alpha support
- Cannonlake workarounds
- Infoframe refactoring for DisplayPort
- VBT updates
- DisplayPort vswing/emph/buffer translation refactoring
- CCS fixes
- Restore GPU clock boost on missed vblanks
- Scatter list updates for userptr allocations
- Gen9+ transition watermarks
- Display IPC (Isochronous Priority Control)
- Private PAT management
- GVT: improved error handling and pci config sanitizing
- Execlist refactoring
- Transparent Huge Page support
- User defined priorities support
- HuC/GuC firmware refactoring
- DP MST fixes
- eDP power sequencing fixes
- Use RCU instead of stop_machine
- PSR state tracking support
- Eviction fixes
- BDW DP aux channel timeout fixes
- LSPCON fixes
- Cannonlake PLL fixes
amdgpu:
- Per VM BO support
- Powerplay cleanups
- CI powerplay support
- PASID mgr for kfd
- SR-IOV fixes
- initial GPU reset for vega10
- Prime mmap support
- TTM updates
- Clock query interface for Raven
- Fence to handle ioctl
- UVD encode ring support on Polaris
- Transparent huge page DMA support
- Compute LRU pipe tweaks
- BO flag to allow buffers to opt out of implicit sync
- CTX priority setting API
- VRAM lost infrastructure plumbing
qxl:
- fix flicker since atomic rework
amdkfd:
- Further improvements from internal AMD tree
- Usermode events
- Drop radeon support
nouveau:
- Pascal temperature sensor support
- Improved BAR2 handling
- MMU rework to support Pascal MMU
exynos:
- Improved HDMI/mixer support
- HDMI audio interface support
tegra:
- Prep work for tegra186
- Cleanup/fixes
msm:
- Preemption support for a5xx
- Display fixes for 8x96 (snapdragon 820)
- Async cursor plane fixes
- FW loading rework
- GPU debugging improvements
vc4:
- Prep for DSI panels
- fix T-format tiling scanout
- New madvise ioctl
Rockchip:
- LVDS support
omapdrm:
- omap4 HDMI CEC support
etnaviv:
- GPU performance counters groundwork
sun4i:
- refactor driver load + TCON backend
- HDMI improvements
- A31 support
- Misc fixes
udl:
- Probe/EDID read fixes.
tilcdc:
- Misc fixes.
pl111:
- Support more variants
adv7511:
- Improve EDID handling.
- HDMI CEC support
sii8620:
- Add remote control support"
* tag 'drm-for-v4.15' of git://people.freedesktop.org/~airlied/linux: (1480 commits)
drm/rockchip: analogix_dp: Use mutex rather than spinlock
drm/mode_object: fix documentation for object lookups.
drm/i915: Reorder context-close to avoid calling i915_vma_close() under RCU
drm/i915: Move init_clock_gating() back to where it was
drm/i915: Prune the reservation shared fence array
drm/i915: Idle the GPU before shinking everything
drm/i915: Lock llist_del_first() vs llist_del_all()
drm/i915: Calculate ironlake intermediate watermarks correctly, v2.
drm/i915: Disable lazy PPGTT page table optimization for vGPU
drm/i915/execlists: Remove the priority "optimisation"
drm/i915: Filter out spurious execlists context-switch interrupts
drm/amdgpu: use irq-safe lock for kiq->ring_lock
drm/amdgpu: bypass lru touch for KIQ ring submission
drm/amdgpu: Potential uninitialized variable in amdgpu_vm_update_directories()
drm/amdgpu: potential uninitialized variable in amdgpu_vce_ring_parse_cs()
drm/amd/powerplay: initialize a variable before using it
drm/amd/powerplay: suppress KASAN out of bounds warning in vega10_populate_all_memory_levels
drm/amd/amdgpu: fix evicted VRAM bo adjudgement condition
drm/vblank: Tune drm_crtc_accurate_vblank_count() WARN down to a debug
drm/rockchip: add CONFIG_OF dependency for lvds
...
of_dma_configure() now checks the device's bus before configuring it, so
we need to set the device's bus before calling.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
We do not want the common dma_configure() pathway to apply
indiscriminately to all devices, since there are plenty of buses which
do not have DMA capability, and if their child devices were used for
DMA API calls it would only be indicative of a driver bug. However,
there are a number of buses for which DMA is implicitly expected even
when not described by firmware - those we whitelist with an automatic
opt-in to dma_configure(), assuming that the DMA address space and the
physical address space are equivalent if not otherwise specified.
Commit 7232888366 ("of: restrict DMA configuration") introduced a
short-term fix by comparing explicit bus types, but this approach is far
from pretty, doesn't scale well, and fails to cope at all with bus
drivers which may be built as modules, like host1x. Let's refine things
by making that opt-in a property of the bus type, which neatly addresses
those problems and lets the decision of whether firmware description of
DMA capability should be optional or mandatory stay internal to the bus
drivers themselves.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This contains a couple of fixes and improvements for host1x, with some
preparatory work for Tegra186 support.
The remainder is cleanup and minor bugfixes for Tegra DRM along with
enhancements to debuggability.
There have also been some enhancements to the kernel interfaces for
host1x job submissions and support for mmap'ing PRIME buffers directly,
all of which get the interfaces very close to ready for serious work.
-----BEGIN PGP SIGNATURE-----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=ZaxL
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-4.14-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v4.14-rc1
This contains a couple of fixes and improvements for host1x, with some
preparatory work for Tegra186 support.
The remainder is cleanup and minor bugfixes for Tegra DRM along with
enhancements to debuggability.
There have also been some enhancements to the kernel interfaces for
host1x job submissions and support for mmap'ing PRIME buffers directly,
all of which get the interfaces very close to ready for serious work.
* tag 'drm/tegra/for-4.14-rc1' of git://anongit.freedesktop.org/tegra/linux: (21 commits)
drm/tegra: Prevent BOs from being freed during job submission
drm/tegra: gem: Implement mmap() for PRIME buffers
drm/tegra: Support render node
drm/tegra: sor: Trace register accesses
drm/tegra: dpaux: Trace register accesses
drm/tegra: dsi: Trace register accesses
drm/tegra: hdmi: Trace register accesses
drm/tegra: dc: Trace register accesses
drm/tegra: sor: Use unsigned int for register offsets
drm/tegra: hdmi: Use unsigned int for register offsets
drm/tegra: dsi: Use unsigned int for register offsets
drm/tegra: dpaux: Use unsigned int for register offsets
drm/tegra: dc: Use unsigned int for register offsets
drm/tegra: Fix NULL deref in debugfs/iova
drm/tegra: switch to drm_*_get(), drm_*_put() helpers
drm/tegra: Set MODULE_FIRMWARE for the VIC
drm/tegra: Add CONFIG_OF dependency
gpu: host1x: Support sub-devices recursively
gpu: host1x: fix error return code in host1x_probe()
gpu: host1x: Fix bitshift/mask multipliers
...
The display architecture in Tegra186 changes slightly compared to
earlier Tegra generations, which requires that we recursively scan
host1x sub-devices from device tree.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Improve kerneldoc for the public parts of the host1x infrastructure in
preparation for adding driver-specific part to the GPU documentation.
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Shutting down a host1x device currently crashes if the device has failed
to probe. The root cause is that the host1x shutdown is implemented as a
struct bus_type callback, but in turn relies on the driver bound to the
device. On failure to probe, no driver will be bound and cause the code
to crash.
Fix this by moving the ->probe(), ->remove() and ->shutdown() callbacks
to the driver rather than the bus.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Only two cleanups this time around. One fixes reference counting of
device tree nodes, the other changes the return value of a function
from an unsigned int to an int to reflect that it will return error
codes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=i5YM
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-4.6-rc1' of http://anongit.freedesktop.org/git/tegra/linux into drm-next
drm/tegra: Changes for v4.6-rc1
Only two cleanups this time around. One fixes reference counting of
device tree nodes, the other changes the return value of a function
from an unsigned int to an int to reflect that it will return error
codes.
* tag 'drm/tegra/for-4.6-rc1' of http://anongit.freedesktop.org/git/tegra/linux:
gpu: host1x: Use a signed return type for do_relocs()
gpu: host1x: bus: Add missing of_node_put()
for_each_child_of_node() performs an of_node_get() on each iteration, so
to break out of the loop an of_node_put() is required.
Found using Coccinelle. The semantic patch used for this is as follows:
// <smpl>
@@
expression e;
local idexpression n;
@@
for_each_child_of_node(..., n) {
... when != of_node_put(n)
when != e = n
(
return n;
|
+ of_node_put(n);
? return ...;
)
...
}
// </smpl>
Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Currently host1x-instanciated devices have their dma_ops left to NULL,
which makes any DMA operation (like buffer import) on ARM64 fallback
to the dummy_dma_ops and fail with an error.
This patch calls of_dma_configure() with the host1x node when creating
such a device, so the proper DMA operations are set.
Suggested-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
When unregistering a host1x driver, make sure to unregister the core
driver as well to prevent it from sticking around and oppose reloading
of the driver.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Previously the struct bus_type exported by the host1x infrastructure was
only a very basic skeleton. Turn that implementation into a more full-
fledged bus to support proper probe ordering and power management.
Note that the bus infrastructure needs to be available before any of the
drivers can be registered. This is automatically ensured if all drivers
are built as loadable modules (via symbol dependencies). If all drivers
are built-in there are no such guarantees and the link order determines
the initcall ordering. Adjust drivers/gpu/Makefile to make sure that the
host1x bus infrastructure is initialized prior to any of its users (only
drm/tegra currently).
v2: Fix building host1x and tegra-drm as modules
Reported-by: Dave Airlie <airlied@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Mark Zhang <markz@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Instead of locking within host1x_device_add(), call it under the lock to
make the locking more consistent.
Signed-off-by: Thierry Reding <treding@nvidia.com>
When a driver's ->probe() function fails, the host1x bus must not call
its ->remove() function because the driver will already have cleaned up
in the error handling path in ->probe().
Signed-off-by: Thierry Reding <treding@nvidia.com>
The internal host1x_{,un}register_client() functions can potentially be
confused with public the host1x_client_{,un}register() functions.
Rename them to host1x_{add,del}_client() to remove some of the possible
confusion.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Include the bus.h header, so that various function declarations are
visible in the source file that implements those functions. This keeps
sparse from suggesting that they should be made static.
Make the host1x_bus_type variable static since it isn't used globally.
Finally replace the slightly unsafe dev_set_name(dev, name) by the more
secure dev_set_name(dev, "%s", name).
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra DRM driver currently uses some infrastructure to defer the DRM
core initialization until all required devices have registered. The same
infrastructure can potentially be used by any other driver that requires
more than a single sub-device of the host1x module.
Make the infrastructure more generic and keep only the DRM specific code
in the DRM part of the driver. Eventually this will make it easy to move
the DRM driver part back to the DRM subsystem.
Signed-off-by: Thierry Reding <treding@nvidia.com>