Граф коммитов

15 Коммитов

Автор SHA1 Сообщение Дата
Colin Ian King 78bf386daf pinctrl: mediatek: clean up indentation issues, add missing tab
Trivial fix to clean up indentation issues, add one level of
indentation on two if statements.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-11-09 09:54:54 +01:00
Colin Ian King 7a52127e3c pinctrl: mediatek: fix check on EINT_NA comparison
Currently, the check on desc->eint.eint_n == EINT_NA is always false
because this is comparing a u16 to -1 which can never be true.  Fix
this by casting EINT_NA to u16.

Detected by CoverityScan, CID#1473610 ("Operands don't affect result")

Fixes: fb5fa8dc15 ("pinctrl: mediatek: extend struct mtk_pin_desc to pinctrl-mtk-common-v2.c")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-26 09:43:01 +02:00
Wei Yongjun 068cfb9a0f pinctrl: mediatek: moore: fix return value check in mtk_moore_pinctrl_probe()
In case of error, the function devm_kmalloc_array() returns NULL pointer
not ERR_PTR(). The IS_ERR() test in the return value check should be
replaced with NULL test.

Fixes: b7d7f9eeca ("pinctrl: mediatek: extend struct mtk_pin_desc which per-pin driver depends on")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-21 09:08:18 -07:00
Linus Walleij 22d7fe4984 pinctrl: mtk: Fix up GPIO includes
Include only <linux/gpio/driver.h> since this is a driver,
not a consumer.

Cc: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-18 16:38:27 -07:00
Sean Wang 89132dd8ff pinctrl: mediatek: extend eint build to pinctrl-mtk-common-v2.c
Almost all MediaTek SoCs apply the exact same logic to build eint, so move
the common functions into pinctrl-mtk-common-v2.c to allow each new pinctrl
driver to reuse them. Also, add a protection checker on hw->soc->eint_hw to
avoid invalid memory access when there's certain SoC not to define its
eint_hw properly in the code flow.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-18 14:53:37 -07:00
Sean Wang b7d7f9eeca pinctrl: mediatek: extend struct mtk_pin_desc which per-pin driver depends on
Because the pincrl-mtk-common.c is an implementation for per-pin binding,
its pin descriptor includes more information than pinctrl-mtk-common-v2
so far can support. So, we complement these data before writing a driver
using pincrl-mtk-common-v2.c for per-pin binding. By the way, the size of
struct mtk_pin_desc would be larger than struct pinctrl_pin_desc can hold,
so it's necessary to have a copy before the pins information is being
registered into the core.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-18 14:53:22 -07:00
Sean Wang 2bc47dfe4f pinctrl: mediatek: add multiple register bases support to pinctrl-mtk-common-v2.c
Certain SoC own multiple register base for accessing each pin groups,
it's easy to be done with extend struct mtk_pin_field_calc to support
the kind of SoC such as MT8183.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-18 14:53:12 -07:00
Sean Wang ea051eb384 pinctrl: mediatek: use pin descriptor all in pinctrl-mtk-common-v2.c
all use pin descriptor instead in pinctrl-mtk-common-v2.c for the
consistency and extensibility.

Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-18 14:53:07 -07:00
Sean Wang 182c842fd5 pinctrl: mediatek: add ies register support to pinctrl-mtk-common-v2.c
Certain SoCs have to program an extra IES register to configure input
enabled mode so that we add it in the existing path as an option.

Signed-off-by: Ryder.Lee <ryder.lee@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-18 14:53:00 -07:00
Sean Wang 0d7ca77214 pinctrl: mediatek: add advanced pull related support to pinctrl-mtk-common-v2.c
There are some specific pins (i.e. MMC/SD) need specific registers to
turn on/off the 10K & 50k(75K) resistors when pull up/down.

Therefore, this patch adds the custom prarmeters so that the user could
control it through device tree.

Signed-off-by: Ryder.Lee <ryder.lee@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-18 14:52:57 -07:00
Sean Wang 85430152ba pinctrl: mediatek: add pull related support to pinctrl-mtk-common-v2.c
Put pull control support related functions to pinctrl-mtk-common-v2.c
as these operations might be different by chips and allow different
type of driver to reuse them.

Signed-off-by: Ryder.Lee <ryder.lee@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-18 14:52:55 -07:00
Sean Wang c28321979b pinctrl: mediatek: add driving strength related support to pinctrl-mtk-common-v2.c
Put driving strength support related functions to pinctrl-mtk-common-v2.c
as these operations might be different by chips and allow different type
of driver to reuse them.

Signed-off-by: Ryder.Lee <ryder.lee@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-18 14:52:49 -07:00
Sean Wang 1dc5e53691 pinctrl: mediatek: extend struct mtk_pin_soc to pinctrl-mtk-common-v2.c
Add two parameters gpio_m and eint_m for configuring GPIO mode and EINT
mode, they might be varying depend on SoC.

Signed-off-by: Ryder.Lee <ryder.lee@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-18 14:52:45 -07:00
Sean Wang fb5fa8dc15 pinctrl: mediatek: extend struct mtk_pin_desc to pinctrl-mtk-common-v2.c
This patch introduces a data structure mtk_pin_desc, which is used to
provide information per pin characteristic such as driving current,
eint number and a driving index, that is used to lookup table describing
the details about the groups of driving current by which the pin is able
to adjust the driving strength so that the driver could get the
appropriate driving group when calls .pin_config_get()/set().

Signed-off-by: Ryder.Lee <ryder.lee@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-18 14:52:42 -07:00
Sean Wang e78d57b2f8 pinctrl: mediatek: add pinctrl-moore that implements the generic pinctrl dt-bindings
Add a generic driver pinctrl-moore.c for MT762x SoC and any other SoC
that would like to use generic dt-binding. The patch is furtherly
refactored from pinctrl-mt7622.c that totally uses the functions back by
the generic pinctrl core such as GENERIC_PINCONF, GENERIC_PINCTRL_GROUPS,
and GENERIC_PINMUX_FUNCTIONS and its binding also completely follows up
pinctrl-bindings.txt in Documentation/devicetree/bindings/pinctrl/ to
implement.

Signed-off-by: Ryder.Lee <ryder.lee@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-09-18 14:52:37 -07:00