Граф коммитов

1040 Коммитов

Автор SHA1 Сообщение Дата
Theodore Ts'o 8a7411a243 ext4: fix on-line resizing regression
https://bugzilla.kernel.org/show_bug.cgi?id=25352

This regression was caused by commit a31437b85: "ext4: use
sb_issue_zeroout in setup_new_group_blocks", by accidentally dropping
the code which reserved the block group descriptor and inode table
blocks.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-12-23 15:00:54 -05:00
Aaro Koskinen 6d5c3aa84b ext4: fix typo which broke '..' detection in ext4_find_entry()
There should be a check for the NUL character instead of '0'.

Fortunately the only thing that cares about this is NFS serving, which
is why we didn't notice this in the merge window testing.

Reported-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-12-14 21:45:31 -05:00
Theodore Ts'o 1449032be1 ext4: Turn off multiple page-io submission by default
Jon Nelson has found a test case which causes postgresql to fail with
the error:

psql:t.sql:4: ERROR: invalid page header in block 38269 of relation base/16384/16581

Under memory pressure, it looks like part of a file can end up getting
replaced by zero's.  Until we can figure out the cause, we'll roll
back the change and use block_write_full_page() instead of
ext4_bio_write_page().  The new, more efficient writing function can
be used via the mount option mblk_io_submit, so we can test and fix
the new page I/O code.

To reproduce the problem, install postgres 8.4 or 9.0, and pin enough
memory such that the system just at the end of triggering writeback
before running the following sql script:

begin;
create temporary table foo as select x as a, ARRAY[x] as b FROM
generate_series(1, 10000000 ) AS x;
create index foo_a_idx on foo (a);
create index foo_b_idx on foo USING GIN (b);
rollback;

If the temporary table is created on a hard drive partition which is
encrypted using dm_crypt, then under memory pressure, approximately
30-40% of the time, pgsql will issue the above failure.

This patch should fix this problem, and the problem will come back if
the file system is mounted with the mblk_io_submit mount option.

Reported-by: Jon Nelson <jnelson@jamponi.net>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-12-14 15:27:50 -05:00
Lukas Czerner e681c047e4 ext4: Add EXT4_IOC_TRIM ioctl to handle batched discard
Filesystem independent ioctl was rejected as not common enough to be in
core vfs ioctl. Since we still need to access to this functionality this
commit adds ext4 specific ioctl EXT4_IOC_TRIM to dispatch
ext4_trim_fs().

It takes fstrim_range structure as an argument. fstrim_range is definec in
the include/linux/fs.h and its definition is as follows.

struct fstrim_range {
	__u64 start;
	__u64 len;
	__u64 minlen;
}

start	- first Byte to trim
len	- number of Bytes to trim from start
minlen	- minimum extent length to trim, free extents shorter than this
  number of Bytes will be ignored. This will be rounded up to fs
  block size.

After the FITRIM is done, the number of actually discarded Bytes is stored
in fstrim_range.len to give the user better insight on how much storage
space has been really released for wear-leveling.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-11-19 21:47:07 -05:00
Lukas Czerner 93bb41f4f8 fs: Do not dispatch FITRIM through separate super_operation
There was concern that FITRIM ioctl is not common enough to be included
in core vfs ioctl, as Christoph Hellwig pointed out there's no real point
in dispatching this out to a separate vector instead of just through
->ioctl.

So this commit removes ioctl_fstrim() from vfs ioctl and trim_fs
from super_operation structure.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-11-19 21:18:35 -05:00
Darrick J. Wong 5a9ae68a34 ext4: ext4_fill_super shouldn't return 0 on corruption
At the start of ext4_fill_super, ret is set to -EINVAL, and any failure path
out of that function returns ret.  However, the generic_check_addressable
clause sets ret = 0 (if it passes), which means that a subsequent failure (e.g.
a group checksum error) returns 0 even though the mount should fail.  This
causes vfs_kern_mount in turn to think that the mount succeeded, leading to an
oops.

A simple fix is to avoid using ret for the generic_check_addressable check,
which was last changed in commit 30ca22c70e.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-11-19 09:56:44 -05:00
Dan Carpenter f4c8cc652d ext4: missing unlock in ext4_clear_request_list()
If the the li_request_list was empty then it returned with the lock
held.  Instead of adding a "goto unlock" I just removed that special
case and let it go past the empty list_for_each_safe().

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-11-17 21:46:25 -05:00
Markus Trippelsdorf 08da1193d2 ext4: fix setting random pages PageUptodate
ext4_end_bio calls put_page and kmem_cache_free before calling
SetPageUpdate(). This can result in setting the PageUptodate bit on
random pages and causes the following BUG:

 BUG: Bad page state in process rm  pfn:52e54
 page:ffffea0001222260 count:0 mapcount:0 mapping:          (null) index:0x0
 arch kernel: page flags: 0x4000000000000008(uptodate)

Fix the problem by moving put_io_page() after the SetPageUpdate() call.

Thanks to Hugh Dickins for analyzing this problem.

Reported-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Tested-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: Markus Trippelsdorf <markus@trippelsdorf.de>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-11-17 21:46:06 -05:00
Linus Torvalds a7bcf21e60 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: Add new ext4 inode tracepoints
  ext4: Don't call sb_issue_discard() in ext4_free_blocks()
  ext4: do not try to grab the s_umount semaphore in ext4_quota_off
  ext4: fix potential race when freeing ext4_io_page structures
  ext4: handle writeback of inodes which are being freed
  ext4: initialize the percpu counters before replaying the journal
  ext4: "ret" may be used uninitialized in ext4_lazyinit_thread()
  ext4: fix lazyinit hang after removing request
2010-11-08 11:54:53 -08:00
Theodore Ts'o 7ff9c073dd ext4: Add new ext4 inode tracepoints
Add ext4_evict_inode, ext4_drop_inode, ext4_mark_inode_dirty, and
ext4_begin_ordered_truncate()

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-11-08 13:51:33 -05:00
Theodore Ts'o b56ff9d397 ext4: Don't call sb_issue_discard() in ext4_free_blocks()
Commit 5c521830cf (ext4: Support discard requests when running in
no-journal mode) attempts to add sb_issue_discard() for data blocks
(in data=writeback mode) and in no-journal mode.  Unfortunately, this
no longer works, because in commit dd3932eddf (block: remove
BLKDEV_IFL_WAIT), sb_issue_discard() only presents a synchronous
interface, and there are times when we call ext4_free_blocks() when we
are are holding a spinlock, or are otherwise in an atomic context.

For now, I've removed the call to sb_issue_discard() to prevent a
deadlock or (if spinlock debugging is enabled) failures like this:

BUG: scheduling while atomic: rc.sysinit/1376/0x00000002
Pid: 1376, comm: rc.sysinit Not tainted 2.6.36-ARCH #1
Call Trace:
[<ffffffff810397ce>] __schedule_bug+0x5e/0x70
[<ffffffff81403110>] schedule+0x950/0xa70
[<ffffffff81060bad>] ? insert_work+0x7d/0x90
[<ffffffff81060fbd>] ? queue_work_on+0x1d/0x30
[<ffffffff81061127>] ? queue_work+0x37/0x60
[<ffffffff8140377d>] schedule_timeout+0x21d/0x360
[<ffffffff812031c3>] ? generic_make_request+0x2c3/0x540
[<ffffffff81402680>] wait_for_common+0xc0/0x150
[<ffffffff81041490>] ? default_wake_function+0x0/0x10
[<ffffffff812034bc>] ? submit_bio+0x7c/0x100
[<ffffffff810680a0>] ? wake_bit_function+0x0/0x40
[<ffffffff814027b8>] wait_for_completion+0x18/0x20
[<ffffffff8120a969>] blkdev_issue_discard+0x1b9/0x210
[<ffffffff811ba03e>] ext4_free_blocks+0x68e/0xb60
[<ffffffff811b1650>] ? __ext4_handle_dirty_metadata+0x110/0x120
[<ffffffff811b098c>] ext4_ext_truncate+0x8cc/0xa70
[<ffffffff810d713e>] ? pagevec_lookup+0x1e/0x30
[<ffffffff81191618>] ext4_truncate+0x178/0x5d0
[<ffffffff810eacbb>] ? unmap_mapping_range+0xab/0x280
[<ffffffff810d8976>] vmtruncate+0x56/0x70
[<ffffffff811925cb>] ext4_setattr+0x14b/0x460
[<ffffffff811319e4>] notify_change+0x194/0x380
[<ffffffff81117f80>] do_truncate+0x60/0x90
[<ffffffff811e08fa>] ? security_inode_permission+0x1a/0x20
[<ffffffff811eaec1>] ? tomoyo_path_truncate+0x11/0x20
[<ffffffff81127539>] do_last+0x5d9/0x770
[<ffffffff811278bd>] do_filp_open+0x1ed/0x680
[<ffffffff8140644f>] ? page_fault+0x1f/0x30
[<ffffffff81132bfc>] ? alloc_fd+0xec/0x140
[<ffffffff81118db1>] do_sys_open+0x61/0x120
[<ffffffff81118e8b>] sys_open+0x1b/0x20
[<ffffffff81002e6b>] system_call_fastpath+0x16/0x1b

https://bugzilla.kernel.org/show_bug.cgi?id=22302

Reported-by: Mathias Burén <mathias.buren@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: jiayingz@google.com
2010-11-08 13:49:33 -05:00
Dmitry Monakhov 87009d86dc ext4: do not try to grab the s_umount semaphore in ext4_quota_off
It's not needed to sync the filesystem, and it fixes a lock_dep complaint.

Signed-off-by: Dmitry Monakhov <dmonakhov@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
2010-11-08 13:47:33 -05:00
Theodore Ts'o 83668e7141 ext4: fix potential race when freeing ext4_io_page structures
Use an atomic_t and make sure we don't free the structure while we
might still be submitting I/O for that page.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-11-08 13:45:33 -05:00
Theodore Ts'o f7ad6d2e92 ext4: handle writeback of inodes which are being freed
The following BUG can occur when an inode which is getting freed when
it still has dirty pages outstanding, and it gets deleted (in this
because it was the target of a rename).  In ordered mode, we need to
make sure the data pages are written just in case we crash before the
rename (or unlink) is committed.  If the inode is being freed then
when we try to igrab the inode, we end up tripping the BUG_ON at
fs/ext4/page-io.c:146.

To solve this problem, we need to keep track of the number of io
callbacks which are pending, and avoid destroying the inode until they
have all been completed.  That way we don't have to bump the inode
count to keep the inode from being destroyed; an approach which
doesn't work because the count could have already been dropped down to
zero before the inode writeback has started (at which point we're not
allowed to bump the count back up to 1, since it's already started
getting freed).

Thanks to Dave Chinner for suggesting this approach, which is also
used by XFS.

  kernel BUG at /scratch_space/linux-2.6/fs/ext4/page-io.c:146!
  Call Trace:
   [<ffffffff811075b1>] ext4_bio_write_page+0x172/0x307
   [<ffffffff811033a7>] mpage_da_submit_io+0x2f9/0x37b
   [<ffffffff811068d7>] mpage_da_map_and_submit+0x2cc/0x2e2
   [<ffffffff811069b3>] mpage_add_bh_to_extent+0xc6/0xd5
   [<ffffffff81106c66>] write_cache_pages_da+0x2a4/0x3ac
   [<ffffffff81107044>] ext4_da_writepages+0x2d6/0x44d
   [<ffffffff81087910>] do_writepages+0x1c/0x25
   [<ffffffff810810a4>] __filemap_fdatawrite_range+0x4b/0x4d
   [<ffffffff810815f5>] filemap_fdatawrite_range+0xe/0x10
   [<ffffffff81122a2e>] jbd2_journal_begin_ordered_truncate+0x7b/0xa2
   [<ffffffff8110615d>] ext4_evict_inode+0x57/0x24c
   [<ffffffff810c14a3>] evict+0x22/0x92
   [<ffffffff810c1a3d>] iput+0x212/0x249
   [<ffffffff810bdf16>] dentry_iput+0xa1/0xb9
   [<ffffffff810bdf6b>] d_kill+0x3d/0x5d
   [<ffffffff810be613>] dput+0x13a/0x147
   [<ffffffff810b990d>] sys_renameat+0x1b5/0x258
   [<ffffffff81145f71>] ? _atomic_dec_and_lock+0x2d/0x4c
   [<ffffffff810b2950>] ? cp_new_stat+0xde/0xea
   [<ffffffff810b29c1>] ? sys_newlstat+0x2d/0x38
   [<ffffffff810b99c6>] sys_rename+0x16/0x18
   [<ffffffff81002a2b>] system_call_fastpath+0x16/0x1b

Reported-by: Nick Bowler <nbowler@elliptictech.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Tested-by: Nick Bowler <nbowler@elliptictech.com>
2010-11-08 13:43:33 -05:00
Theodore Ts'o ce7e010aef ext4: initialize the percpu counters before replaying the journal
We now initialize the percpu counters before replaying the journal,
but after the journal, we recalculate the global counters, to deal
with the possibility of the per-blockgroup counts getting updated by
the journal replay.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-11-03 12:03:21 -04:00
Theodore Ts'o b2c78cd09b ext4: "ret" may be used uninitialized in ext4_lazyinit_thread()
Newer GCC's reported the following build warning:

   fs/ext4/super.c: In function 'ext4_lazyinit_thread':
   fs/ext4/super.c:2702: warning: 'ret' may be used uninitialized in this function

Fix it by removing the need for the ret variable in the first place.

Signed-off-by: "Lukas Czerner" <lczerner@redhat.com>
Reported-by: "Stefan Richter" <stefanr@s5r6.in-berlin.de>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-11-02 14:19:30 -04:00
Lukas Czerner f4245bd4eb ext4: fix lazyinit hang after removing request
When the request has been removed from the list and no other request
has been issued, we will end up with next wakeup scheduled to
MAX_JIFFY_OFFSET which is bad. So check for that.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-11-02 14:07:17 -04:00
Theodore Ts'o eb8abb927a ext4: Remove useless spinlock in ext4_getattr()
Linus noted, and complained to me, that doing while lots of "git diff"'s
of kernel sources, these spinlocks were responsible for 27% of the
spinlock cost on his two-processor system as reported by perf.

Git was doing lots of parallel stats, and this was putting a lot of
pressure on ext4_getattr().  A spinlock to protect a single
memory-to-memory copy is pointless, so remove it.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-02 10:38:30 -04:00
Al Viro 152a083666 new helper: mount_bdev()
... and switch of the obvious get_sb_bdev() users to ->mount()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29 04:16:13 -04:00
Linus Torvalds 671f837a04 Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: BUG_ON fix: check if page has buffers before calling page_buffers()
2010-10-28 15:46:57 -07:00
Theodore Ts'o b1142e8fec ext4: BUG_ON fix: check if page has buffers before calling page_buffers()
We need to make check if a page does not have buffes by checking
page_has_buffers(page) before calling page_buffers(page) in
ext4_writepage().  Otherwise page_buffers() could throw a BUG_ON.

Thanks also to Markus Trippelsdorf and Avinash Kurup who also reported
the problem.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Reported-by: Sedat Dilek <sedat.dilek@googlemail.com>
Tested-by: Sedat Dilek <sedat.dilek@googlemail.com>
2010-10-28 17:33:57 -04:00
Ingo Molnar 19ef20143f ext4: fix compile with CONFIG_EXT4_FS_XATTR disabled
Commit 5dabfc78dc ("ext4: rename {exit,init}_ext4_*() to
ext4_{exit,init}_*()") causes

  fs/ext4/super.c:4776: error: implicit declaration of function ‘ext4_init_xattr’

when CONFIG_EXT4_FS_XATTR is disabled.

It renamed init_ext4_xattr to ext4_init_xattr but forgot to update the
dummy definition in fs/ext4/xattr.h.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: "Theodore Ts'o" <tytso@mit.edu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-28 09:29:17 -07:00
Theodore Ts'o a107e5a3a4 Merge branch 'next' into upstream-merge
Conflicts:
	fs/ext4/inode.c
	fs/ext4/mballoc.c
	include/trace/events/ext4.h
2010-10-27 23:44:47 -04:00
Dmitry Monakhov 3d287de3b8 ext4: optimize orphan_list handling for ext4_setattr
Surprisingly chown() on ext4 is not SMP scalable operation. 
Due to unconditional orphan_del(NULL, inode) in ext4_setattr()
result in significant performance overhead because of global orphan
mutex, especially in no-journal mode (where orphan_add() is noop).
It is possible to skip explicit orphan_del if possible.
Results of fchown() micro-benchmark in no-journal mode
while (1) {
   iteration++;
   fchown(fd, uid, gid);
   fchown(fd, uid + 1, gid + 1)
}
measured: iterations per millisecond
| nr_tasks | w/o patch | with patch |
|        1 |       142 |        185 |
|        4 |       109 |        642 |

Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 22:08:46 -04:00
Nicolas Kaiser beed5ecbaa ext4: fix unbalanced mutex unlock in error path of ext4_li_request_new
Signed-off-by: Nicolas Kaiser <nikai@nikai.net>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 22:08:42 -04:00
Kazuya Mio a6371b636f ext4: fix compile error in ext4_fallocate()
When I compiled 2.6.36-rc3 kernel with EXT4FS_DEBUG definition, I got
the following compile error.

  CC [M]  fs/ext4/extents.o
fs/ext4/extents.c: In function 'ext4_fallocate':
fs/ext4/extents.c:3772: error: 'block' undeclared (first use in this function)
fs/ext4/extents.c:3772: error: (Each undeclared identifier is reported only once
fs/ext4/extents.c:3772: error: for each function it appears in.)
make[2]: *** [fs/ext4/extents.o] Error 1

The patch fixes this problem.

Signed-off-by: Kazuya Mio <k-mio@sx.jp.nec.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:15 -04:00
Eric Sandeen eee4adc709 ext4: move ext4_mb_{get,put}_buddy_cache_lock and make them static
These functions are only used within fs/ext4/mballoc.c, so move them
so they are used after they are defined, and then make them be static.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:15 -04:00
Theodore Ts'o 61d08673de ext4: rename mark_bitmap_end() to ext4_mark_bitmap_end()
Fix a namespace leak from fs/ext4

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:15 -04:00
Theodore Ts'o 4a873a472b ext4: move flush_completed_IO to fs/ext4/fsync.c and make it static
Fix a namespace leak by moving the function to the file where it is
used and making it static.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:14 -04:00
Theodore Ts'o bf89d16f6e ext4: rename {ext,idx}_pblock and inline small extent functions
Cleanup namespace leaks from fs/ext4 and the inline trivial functions
ext4_{ext,idx}_pblock() and ext4_{ext,idx}_store_pblock() since the
code size actually shrinks when we make these functions inline,
they're so trivial.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:14 -04:00
Theodore Ts'o 1f109d5a17 ext4: make various ext4 functions be static
These functions have no need to be exported beyond file context.

No functions needed to be moved for this commit; just some function
declarations changed to be static and removed from header files.

(A similar patch was submitted by Eric Sandeen, but I wanted to handle
code movement in separate patches to make sure code changes didn't
accidentally get dropped.)

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:14 -04:00
Theodore Ts'o 5dabfc78dc ext4: rename {exit,init}_ext4_*() to ext4_{exit,init}_*()
This is a cleanup to avoid namespace leaks out of fs/ext4

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:14 -04:00
Theodore Ts'o 7f93cff90f ext4: fix kernel oops if the journal superblock has a non-zero j_errno
Commit 84061e0 fixed an accounting bug only to introduce the
possibility of a kernel OOPS if the journal has a non-zero j_errno
field indicating that the file system had detected a fs inconsistency.
After the journal replay, if the journal superblock indicates that the
file system has an error, this indication is transfered to the file
system and then ext4_commit_super() is called to write this to the
disk.

But since the percpu counters are now initialized after the journal
replay, the call to ext4_commit_super() will cause a kernel oops since
it needs to use the percpu counters the ext4 superblock structure.

The fix is to skip setting the ext4 free block and free inode fields
if the percpu counter has not been set.

Thanks to Ken Sumrall for reporting and analyzing the root causes of
this bug.

Addresses-Google-Bug: #3054080

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:13 -04:00
Eric Sandeen 72f84e6560 ext4: update writeback_index based on last page scanned
As pointed out in a prior patch, updating the mapping's
writeback_index based on pages written isn't quite right;
what the writeback index is really supposed to reflect is
the next page which should be scanned for writeback during
periodic flush.

As in write_cache_pages(), write_cache_pages_da() does
this scanning for us as we assemble the mpd for later
writeout.  If we keep track of the next page after the
current scan, we can easily update writeback_index without
worrying about pages written vs. pages skipped, etc.

Without this, an fsync will reset writeback_index to
0 (its starting index) + however many pages it wrote, which
can mess up the progress of periodic flush.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:13 -04:00
Eric Sandeen 5b41d92437 ext4: implement writeback livelock avoidance using page tagging
This is analogous to Jan Kara's commit,
f446daaea9
mm: implement writeback livelock avoidance using page tagging

but since we forked write_cache_pages, we need to reimplement
it there (and in ext4_da_writepages, since range_cyclic handling
was moved to there)

If you start a large buffered IO to a file, and then set
fsync after it, you'll find that fsync does not complete
until the other IO stops.

If you continue re-dirtying the file (say, putting dd
with conv=notrunc in a loop), when fsync finally completes
(after all IO is done), it reports via tracing that
it has written many more pages than the file contains;
in other words it has synced and re-synced pages in
the file multiple times.

This then leads to problems with our writeback_index
update, since it advances it by pages written, and
essentially sets writeback_index off the end of the
file...

With the following patch, we only sync as much as was
dirty at the time of the sync.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:13 -04:00
Eric Sandeen bbd08344e3 ext4: tidy up a void argument in inode.c
This doesn't fix anything at all, it just removes a vestige
of prior use from __mpage_da_writepage()

__mpage_da_writepage() had a *void argument leftover from
its previous life as a callback; make it reflect the actual type.

Fixing this up makes it slightly more obvious to read, and 
enables proper typechecking.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:12 -04:00
Lukas Czerner 27ee40df2b ext4: add batched_discard into ext4 feature list
Should be applied on the top of "lazy inode table initialization"
and "batched discard support" patch-sets.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:12 -04:00
Lukas Czerner 7360d1731e ext4: Add batched discard support for ext4
Walk through allocation groups and trim all free extents. It can be
invoked through FITRIM ioctl on the file system. The main idea is to
provide a way to trim the whole file system if needed, since some SSD's
may suffer from performance loss after the whole device was filled (it
does not mean that fs is full!).

It search for free extents in allocation groups specified by Byte range
start -> start+len. When the free extent is within this range, blocks
are marked as used and then trimmed. Afterwards these blocks are marked
as free in per-group bitmap.

Since fstrim is a long operation it is good to have an ability to
interrupt it by a signal. This was added by Dmitry Monakhov.
Thanks Dimitry.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Dmitry Monakhov <dmonakhov@openvz.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Dmitry Monakhov <dmonakhov@openvz.org>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:12 -04:00
Lukas Czerner 77ca6cdf0a ext4: Use return value from sb_issue_discard()
Use return value from sb_issue_discard() as return value in
ext4_issue_discard(). Since sb_issue_discard() may result in more
serious errors than just -EOPNOTSUPP it is worth to inform user of this
function about them to handle error cases properly.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:11 -04:00
Namhyung Kim 877836905d ext4: Check return value of sb_getblk() and friends
Fail block allocation if sb_getblk() returns NULL. In that case,
sb_find_get_block() also likely to fail so that it should skip
calling ext4_forget().

Signed-off-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:11 -04:00
Theodore Ts'o bd2d0210cf ext4: use bio layer instead of buffer layer in mpage_da_submit_io
Call the block I/O layer directly instad of going through the buffer
layer.  This should give us much better performance and scalability,
as well as lowering our CPU utilization when doing buffered writeback.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:10 -04:00
Theodore Ts'o 1de3e3df91 ext4: move mpage_put_bnr_to_bhs()'s functionality to mpage_da_submit_io()
This massively simplifies the ext4_da_writepages() code path by
completely removing mpage_put_bnr_bhs(), which is almost 100 lines of
code iterating over a set of pages using pagevec_lookup(), and folds
that functionality into mpage_da_submit_io()'s existing
pagevec_lookup() loop.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:10 -04:00
Theodore Ts'o 3ecdb3a193 ext4: inline walk_page_buffers() into mpage_da_submit_io
Expand the call:

  if (walk_page_buffers(NULL, page_bufs, 0, len, NULL,
                        ext4_bh_delay_or_unwritten))
	goto redirty_page

into mpage_da_submit_io().

This will allow us to merge in mpage_put_bnr_to_bhs() in the next
patch.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:10 -04:00
Theodore Ts'o cb20d51883 ext4: inline ext4_writepage() into mpage_da_submit_io()
As a prepratory step to switching to bio_submit, inline
ext4_writepage() into mpage_da_submit() and then simplify things a
bit.  This makes it clearer what mpage_da_submit needs to do.

Also, move the ClearPageChecked(page) call into
__ext4_journalled_writepage(), as a minor bit of cleanup refactoring.

This also allows us to pull i_size_read() and
ext4_should_journal_data() out of the loop, which should be a very
minor CPU savings.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:09 -04:00
Theodore Ts'o a42afc5f56 ext4: simplify ext4_writepage()
The actual code in ext4_writepage() is unnecessarily convoluted.
Simplify it so it is easier to understand, but otherwise logically
equivalent.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:09 -04:00
Theodore Ts'o 5a87b7a5da ext4: call mpage_da_submit_io() from mpage_da_map_blocks()
Eventually we need to completely reorganize the ext4 writepage
callpath, but for now, we simplify things a little by calling
mpage_da_submit_io() from mpage_da_map_blocks(), since all of the
places where we call mpage_da_map_blocks() it is followed up by a call
to mpage_da_submit_io().

We're also a wee bit better with respect to error handling, but there
are still a number of issues where it's not clear what the right thing
is to do with ext4 functions deep in the writeback codepath fails.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:09 -04:00
Theodore Ts'o 16828088f9 ext4: use KMEM_CACHE instead of kmem_cache_create
Also remove the SLAB_RECLAIM_ACCOUNT flag from the system zone kmem
cache.  This slab tends to be fairly static, so it shouldn't be marked
as likely to have free pages that can be reclaimed.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:09 -04:00
Theodore Ts'o 7845c04975 ext4: use search_dirblock() in ext4_dx_find_entry()
Use the search_dirblock() in ext4_dx_find_entry().  It makes the code
easier to read, and it takes advantage of common code.  It also saves
100 bytes or so of text space.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Brad Spengler <spender@grsecurity.net>
2010-10-27 21:30:08 -04:00
Theodore Ts'o 8941ec8bb6 ext4: avoid uninitialized memory references in ext3_htree_next_block()
If the first block of htree directory is missing '.' or '..' but is
otherwise a valid directory, and we do a lookup for '.' or '..', it's
possible to dereference an uninitialized memory pointer in
ext4_htree_next_block().

We avoid this by moving the special case from ext4_dx_find_entry() to
ext4_find_entry(); this also means we can optimize ext4_find_entry()
slightly when NFS looks up "..".

Thanks to Brad Spengler for pointing a Clang warning that led me to
look more closely at this code.  The warning was harmless, but it was
useful in pointing out code that was too ugly to live.  This warning was
also reported by Roman Borisov.

Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
Cc: Brad Spengler <spender@grsecurity.net>
2010-10-27 21:30:08 -04:00
Eric Sandeen 640e939656 ext4: remove unused ext4_sb_info members
Not that these take up a lot of room, but the structure is long enough
as it is, and there's no need to confuse people with these various
undocumented & unused structure members...

Signed-off-by: Eric Sandeen <sandeen@redaht.com>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>
2010-10-27 21:30:08 -04:00