Граф коммитов

321 Коммитов

Автор SHA1 Сообщение Дата
Miklos Szeredi 7572777eef fuse: verify ioctl retries
Verify that the total length of the iovec returned in FUSE_IOCTL_RETRY
doesn't overflow iov_length().

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
CC: Tejun Heo <tj@kernel.org>
CC: <stable@kernel.org>         [2.6.31+]
2010-11-30 16:39:27 +01:00
Miklos Szeredi d9d318d39d fuse: fix ioctl when server is 32bit
If a 32bit CUSE server is run on 64bit this results in EIO being
returned to the caller.

The reason is that FUSE_IOCTL_RETRY reply was defined to use 'struct
iovec', which is different on 32bit and 64bit archs.

Work around this by looking at the size of the reply to determine
which struct was used.  This is only needed if CONFIG_COMPAT is
defined.

A more permanent fix for the interface will be to use the same struct
on both 32bit and 64bit.

Reported-by: "ccmail111" <ccmail111@yahoo.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
CC: Tejun Heo <tj@kernel.org>
CC: <stable@kernel.org>         [2.6.31+]
2010-11-30 16:39:27 +01:00
Ken Sumrall a0822c5577 fuse: fix attributes after open(O_TRUNC)
The attribute cache for a file was not being cleared when a file is opened
with O_TRUNC.

If the filesystem's open operation truncates the file ("atomic_o_trunc"
feature flag is set) then the kernel should invalidate the cached st_mtime
and st_ctime attributes.

Also i_size should be explicitly be set to zero as it is used sometimes
without refreshing the cache.

Signed-off-by: Ken Sumrall <ksumrall@android.com>
Cc: Anfei <anfei.zhou@gmail.com>
Cc: "Anand V. Avati" <avati@gluster.com>
Signed-off-by: Miklos Szeredi <miklos@szeredi.hu>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-11-25 06:50:41 +09:00
Al Viro 3c26ff6e49 convert get_sb_nodev() users
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29 04:16:31 -04:00
Al Viro fc14f2fef6 convert get_sb_single() users
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29 04:16:28 -04:00
Al Viro 152a083666 new helper: mount_bdev()
... and switch of the obvious get_sb_bdev() users to ->mount()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-29 04:16:13 -04:00
Miklos Szeredi 0be8557bcd fuse: use release_pages()
Replace iterated page_cache_release() with release_pages(), which is
faster and shorter.

Needs release_pages() to be exported to modules.

Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27 18:03:17 -07:00
Linus Torvalds 426e1f5cec Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (52 commits)
  split invalidate_inodes()
  fs: skip I_FREEING inodes in writeback_sb_inodes
  fs: fold invalidate_list into invalidate_inodes
  fs: do not drop inode_lock in dispose_list
  fs: inode split IO and LRU lists
  fs: switch bdev inode bdi's correctly
  fs: fix buffer invalidation in invalidate_list
  fsnotify: use dget_parent
  smbfs: use dget_parent
  exportfs: use dget_parent
  fs: use RCU read side protection in d_validate
  fs: clean up dentry lru modification
  fs: split __shrink_dcache_sb
  fs: improve DCACHE_REFERENCED usage
  fs: use percpu counter for nr_dentry and nr_dentry_unused
  fs: simplify __d_free
  fs: take dcache_lock inside __d_path
  fs: do not assign default i_ino in new_inode
  fs: introduce a per-cpu last_ino allocator
  new helper: ihold()
  ...
2010-10-26 17:58:44 -07:00
Miklos Szeredi b6777c40c7 fuse: use clear_highpage() and KM_USER0 instead of KM_USER1
Commit 7909b1c640 ("fuse: don't use atomic kmap") removed KM_USER0 usage
from fuse/dev.c.  Switch KM_USER1 uses to KM_USER0 for clarity.  Also
replace open coded clear_highpage().

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:13 -07:00
Jan Beulich 3ecb01df32 use clear_page()/copy_page() in favor of memset()/memcpy() on whole pages
After all that's what they are intended for.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-26 16:52:13 -07:00
Christoph Hellwig 85fe4025c6 fs: do not assign default i_ino in new_inode
Instead of always assigning an increasing inode number in new_inode
move the call to assign it into those callers that actually need it.
For now callers that need it is estimated conservatively, that is
the call is added to all filesystems that do not assign an i_ino
by themselves.  For a few more filesystems we can avoid assigning
any inode number given that they aren't user visible, and for others
it could be done lazily when an inode number is actually needed,
but that's left for later patches.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-10-25 21:26:11 -04:00
Linus Torvalds 092e0e7e52 Merge branch 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl
* 'llseek' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/bkl:
  vfs: make no_llseek the default
  vfs: don't use BKL in default_llseek
  llseek: automatically add .llseek fop
  libfs: use generic_file_llseek for simple_attr
  mac80211: disallow seeks in minstrel debug code
  lirc: make chardev nonseekable
  viotape: use noop_llseek
  raw: use explicit llseek file operations
  ibmasmfs: use generic_file_llseek
  spufs: use llseek in all file operations
  arm/omap: use generic_file_llseek in iommu_debug
  lkdtm: use generic_file_llseek in debugfs
  net/wireless: use generic_file_llseek in debugfs
  drm: use noop_llseek
2010-10-22 10:52:56 -07:00
Arnd Bergmann 6038f373a3 llseek: automatically add .llseek fop
All file_operations should get a .llseek operation so we can make
nonseekable_open the default for future file operations without a
.llseek pointer.

The three cases that we can automatically detect are no_llseek, seq_lseek
and default_llseek. For cases where we can we can automatically prove that
the file offset is always ignored, we use noop_llseek, which maintains
the current behavior of not returning an error from a seek.

New drivers should normally not use noop_llseek but instead use no_llseek
and call nonseekable_open at open time.  Existing drivers can be converted
to do the same when the maintainer knows for certain that no user code
relies on calling seek on the device file.

The generated code is often incorrectly indented and right now contains
comments that clarify for each added line why a specific variant was
chosen. In the version that gets submitted upstream, the comments will
be gone and I will manually fix the indentation, because there does not
seem to be a way to do that using coccinelle.

Some amount of new code is currently sitting in linux-next that should get
the same modifications, which I will do at the end of the merge window.

Many thanks to Julia Lawall for helping me learn to write a semantic
patch that does all this.

===== begin semantic patch =====
// This adds an llseek= method to all file operations,
// as a preparation for making no_llseek the default.
//
// The rules are
// - use no_llseek explicitly if we do nonseekable_open
// - use seq_lseek for sequential files
// - use default_llseek if we know we access f_pos
// - use noop_llseek if we know we don't access f_pos,
//   but we still want to allow users to call lseek
//
@ open1 exists @
identifier nested_open;
@@
nested_open(...)
{
<+...
nonseekable_open(...)
...+>
}

@ open exists@
identifier open_f;
identifier i, f;
identifier open1.nested_open;
@@
int open_f(struct inode *i, struct file *f)
{
<+...
(
nonseekable_open(...)
|
nested_open(...)
)
...+>
}

@ read disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
<+...
(
   *off = E
|
   *off += E
|
   func(..., off, ...)
|
   E = *off
)
...+>
}

@ read_no_fpos disable optional_qualifier exists @
identifier read_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t read_f(struct file *f, char *p, size_t s, loff_t *off)
{
... when != off
}

@ write @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
expression E;
identifier func;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
<+...
(
  *off = E
|
  *off += E
|
  func(..., off, ...)
|
  E = *off
)
...+>
}

@ write_no_fpos @
identifier write_f;
identifier f, p, s, off;
type ssize_t, size_t, loff_t;
@@
ssize_t write_f(struct file *f, const char *p, size_t s, loff_t *off)
{
... when != off
}

@ fops0 @
identifier fops;
@@
struct file_operations fops = {
 ...
};

@ has_llseek depends on fops0 @
identifier fops0.fops;
identifier llseek_f;
@@
struct file_operations fops = {
...
 .llseek = llseek_f,
...
};

@ has_read depends on fops0 @
identifier fops0.fops;
identifier read_f;
@@
struct file_operations fops = {
...
 .read = read_f,
...
};

@ has_write depends on fops0 @
identifier fops0.fops;
identifier write_f;
@@
struct file_operations fops = {
...
 .write = write_f,
...
};

@ has_open depends on fops0 @
identifier fops0.fops;
identifier open_f;
@@
struct file_operations fops = {
...
 .open = open_f,
...
};

// use no_llseek if we call nonseekable_open
////////////////////////////////////////////
@ nonseekable1 depends on !has_llseek && has_open @
identifier fops0.fops;
identifier nso ~= "nonseekable_open";
@@
struct file_operations fops = {
...  .open = nso, ...
+.llseek = no_llseek, /* nonseekable */
};

@ nonseekable2 depends on !has_llseek @
identifier fops0.fops;
identifier open.open_f;
@@
struct file_operations fops = {
...  .open = open_f, ...
+.llseek = no_llseek, /* open uses nonseekable */
};

// use seq_lseek for sequential files
/////////////////////////////////////
@ seq depends on !has_llseek @
identifier fops0.fops;
identifier sr ~= "seq_read";
@@
struct file_operations fops = {
...  .read = sr, ...
+.llseek = seq_lseek, /* we have seq_read */
};

// use default_llseek if there is a readdir
///////////////////////////////////////////
@ fops1 depends on !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier readdir_e;
@@
// any other fop is used that changes pos
struct file_operations fops = {
... .readdir = readdir_e, ...
+.llseek = default_llseek, /* readdir is present */
};

// use default_llseek if at least one of read/write touches f_pos
/////////////////////////////////////////////////////////////////
@ fops2 depends on !fops1 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read.read_f;
@@
// read fops use offset
struct file_operations fops = {
... .read = read_f, ...
+.llseek = default_llseek, /* read accesses f_pos */
};

@ fops3 depends on !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write.write_f;
@@
// write fops use offset
struct file_operations fops = {
... .write = write_f, ...
+	.llseek = default_llseek, /* write accesses f_pos */
};

// Use noop_llseek if neither read nor write accesses f_pos
///////////////////////////////////////////////////////////

@ fops4 depends on !fops1 && !fops2 && !fops3 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
identifier write_no_fpos.write_f;
@@
// write fops use offset
struct file_operations fops = {
...
 .write = write_f,
 .read = read_f,
...
+.llseek = noop_llseek, /* read and write both use no f_pos */
};

@ depends on has_write && !has_read && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier write_no_fpos.write_f;
@@
struct file_operations fops = {
... .write = write_f, ...
+.llseek = noop_llseek, /* write uses no f_pos */
};

@ depends on has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
identifier read_no_fpos.read_f;
@@
struct file_operations fops = {
... .read = read_f, ...
+.llseek = noop_llseek, /* read uses no f_pos */
};

@ depends on !has_read && !has_write && !fops1 && !fops2 && !has_llseek && !nonseekable1 && !nonseekable2 && !seq @
identifier fops0.fops;
@@
struct file_operations fops = {
...
+.llseek = noop_llseek, /* no read or write fn */
};
===== End semantic patch =====

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Julia Lawall <julia@diku.dk>
Cc: Christoph Hellwig <hch@infradead.org>
2010-10-15 15:53:27 +02:00
Geert Uytterhoeven 0157443c56 fuse: Initialize total_len in fuse_retrieve()
fs/fuse/dev.c:1357: warning: ‘total_len’ may be used uninitialized in this
function

Initialize total_len to zero, else its value will be undefined.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2010-10-04 10:45:32 +02:00
Miklos Szeredi b9ca67b2dd fuse: fix lock annotations
Sparse doesn't understand lock annotations of the form
__releases(&foo->lock).  Change them to __releases(foo->lock).  Same
for __acquires().

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2010-09-07 13:42:41 +02:00
Miklos Szeredi 595afaf9e6 fuse: flush background queue on connection close
David Bartly reported that fuse can hang in fuse_get_req_nofail() when
the connection to the filesystem server is no longer active.

If bg_queue is not empty then flush_bg_queue() called from
request_end() can put more requests on to the pending queue.  If this
happens while ending requests on the processing queue then those
background requests will be queued to the pending list and never
ended.

Another problem is that fuse_dev_release() didn't wake up processes
sleeping on blocked_waitq.

Solve this by:

 a) flushing the background queue before calling end_requests() on the
    pending and processing queues

 b) setting blocked = 0 and waking up processes waiting on
    blocked_waitq()

Thanks to David for an excellent bug report.

Reported-by: David Bartley <andareed@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
CC: stable@kernel.org
2010-09-07 13:42:41 +02:00
Linus Torvalds 5f248c9c25 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (96 commits)
  no need for list_for_each_entry_safe()/resetting with superblock list
  Fix sget() race with failing mount
  vfs: don't hold s_umount over close_bdev_exclusive() call
  sysv: do not mark superblock dirty on remount
  sysv: do not mark superblock dirty on mount
  btrfs: remove junk sb_dirt change
  BFS: clean up the superblock usage
  AFFS: wait for sb synchronization when needed
  AFFS: clean up dirty flag usage
  cifs: truncate fallout
  mbcache: fix shrinker function return value
  mbcache: Remove unused features
  add f_flags to struct statfs(64)
  pass a struct path to vfs_statfs
  update VFS documentation for method changes.
  All filesystems that need invalidate_inode_buffers() are doing that explicitly
  convert remaining ->clear_inode() to ->evict_inode()
  Make ->drop_inode() just return whether inode needs to be dropped
  fs/inode.c:clear_inode() is gone
  fs/inode.c:evict() doesn't care about delete vs. non-delete paths now
  ...

Fix up trivial conflicts in fs/nilfs2/super.c
2010-08-10 11:26:52 -07:00
Al Viro b57922d97f convert remaining ->clear_inode() to ->evict_inode()
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09 16:48:37 -04:00
Christoph Hellwig 2c27c65ed0 check ATTR_SIZE contraints in inode_change_ok
Make sure we check the truncate constraints early on in ->setattr by adding
those checks to inode_change_ok.  Also clean up and document inode_change_ok
to make this obvious.

As a fallout we don't have to call inode_newsize_ok from simple_setsize and
simplify it down to a truncate_setsize which doesn't return an error.  This
simplifies a lot of setattr implementations and means we use truncate_setsize
almost everywhere.  Get rid of fat_setsize now that it's trivial and mark
ext2_setsize static to make the calling convention obvious.

Keep the inode_newsize_ok in vmtruncate for now as all callers need an
audit for its removal anyway.

Note: setattr code in ecryptfs doesn't call inode_change_ok at all and
needs a deeper audit, but that is left for later.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09 16:47:39 -04:00
Christoph Hellwig db78b877f7 always call inode_change_ok early in ->setattr
Make sure we call inode_change_ok before doing any changes in ->setattr,
and make sure to call it even if our fs wants to ignore normal UNIX
permissions, but use the ATTR_FORCE to skip those.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-08-09 16:47:38 -04:00
Linus Torvalds fe21ea18c7 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: add retrieve request
  fuse: add store request
  fuse: don't use atomic kmap
2010-08-07 13:18:36 -07:00
Eric Paris 9cfcac810e vfs: re-introduce MAY_CHDIR
Currently MAY_ACCESS means that filesystems must check the permissions
right then and not rely on cached results or the results of future
operations on the object.  This can be because of a call to sys_access() or
because of a call to chdir() which needs to check search without relying on
any future operations inside that dir.  I plan to use MAY_ACCESS for other
purposes in the security system, so I split the MAY_ACCESS and the
MAY_CHDIR cases.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by:  Stephen D. Smalley <sds@tycho.nsa.gov>
Signed-off-by: James Morris <jmorris@namei.org>
2010-08-02 15:35:06 +10:00
Miklos Szeredi 2d45ba381a fuse: add retrieve request
Userspace filesystem can request data to be retrieved from the inode's
mapping.  This request is synchronous and the retrieved data is queued
as a new request.  If the write to the fuse device returns an error
then the retrieve request was not completed and a reply will not be
sent.

Only present pages are returned in the retrieve reply.  Retrieving
stops when it finds a non-present page and only data prior to that is
returned.

This request doesn't change the dirty state of pages.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2010-07-12 14:41:40 +02:00
Miklos Szeredi a1d75f2582 fuse: add store request
Userspace filesystem can request data to be stored in the inode's
mapping.  This request is synchronous and has no reply.  If the write
to the fuse device returns an error then the store request was not
fully completed (but may have updated some pages).

If the stored data overflows the current file size, then the size is
extended, similarly to a write(2) on the filesystem.

Pages which have been completely stored are marked uptodate.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2010-07-12 14:41:40 +02:00
Miklos Szeredi 7909b1c640 fuse: don't use atomic kmap
Don't use atomic kmap for mapping userspace buffers in device
read/write/splice.

This is necessary because the next patch (adding store notify)
requires that caller of fuse_copy_page() may sleep between
invocations.  The simplest way to ensure this is to change the atomic
kmaps to non-atomic ones.

Thankfully architectures where kmap() is not a no-op are going out of
fashion, so we can ignore the (probably negligible) performance impact
of this change.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2010-07-12 14:41:40 +02:00
Linus Torvalds 003386fff3 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  mm: export generic_pipe_buf_*() to modules
  fuse: support splice() reading from fuse device
  fuse: allow splice to move pages
  mm: export remove_from_page_cache() to modules
  mm: export lru_cache_add_*() to modules
  fuse: support splice() writing to fuse device
  fuse: get page reference for readpages
  fuse: use get_user_pages_fast()
  fuse: remove unneeded variable
2010-05-30 09:16:14 -07:00
Christoph Hellwig 7ea8085910 drop unused dentry argument to ->fsync
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-05-27 22:05:02 -04:00
Kay Sievers 578454ff7e driver core: add devname module aliases to allow module on-demand auto-loading
This adds:
  alias: devname:<name>
to some common kernel modules, which will allow the on-demand loading
of the kernel module when the device node is accessed.

Ideally all these modules would be compiled-in, but distros seems too
much in love with their modularization that we need to cover the common
cases with this new facility. It will allow us to remove a bunch of pretty
useless init scripts and modprobes from init scripts.

The static device node aliases will be carried in the module itself. The
program depmod will extract this information to a file in the module directory:
  $ cat /lib/modules/2.6.34-00650-g537b60d-dirty/modules.devname
  # Device nodes to trigger on-demand module loading.
  microcode cpu/microcode c10:184
  fuse fuse c10:229
  ppp_generic ppp c108:0
  tun net/tun c10:200
  dm_mod mapper/control c10:235

Udev will pick up the depmod created file on startup and create all the
static device nodes which the kernel modules specify, so that these modules
get automatically loaded when the device node is accessed:
  $ /sbin/udevd --debug
  ...
  static_dev_create_from_modules: mknod '/dev/cpu/microcode' c10:184
  static_dev_create_from_modules: mknod '/dev/fuse' c10:229
  static_dev_create_from_modules: mknod '/dev/ppp' c108:0
  static_dev_create_from_modules: mknod '/dev/net/tun' c10:200
  static_dev_create_from_modules: mknod '/dev/mapper/control' c10:235
  udev_rules_apply_static_dev_perms: chmod '/dev/net/tun' 0666
  udev_rules_apply_static_dev_perms: chmod '/dev/fuse' 0666

A few device nodes are switched to statically allocated numbers, to allow
the static nodes to work. This might also useful for systems which still run
a plain static /dev, which is completely unsafe to use with any dynamic minor
numbers.

Note:
The devname aliases must be limited to the *common* and *single*instance*
device nodes, like the misc devices, and never be used for conceptually limited
systems like the loop devices, which should rather get fixed properly and get a
control node for losetup to talk to, instead of creating a random number of
device nodes in advance, regardless if they are ever used.

This facility is to hide the mess distros are creating with too modualized
kernels, and just to hide that these modules are not compiled-in, and not to
paper-over broken concepts. Thanks! :)

Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: David S. Miller <davem@davemloft.net>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Chris Mason <chris.mason@oracle.com>
Cc: Alasdair G Kergon <agk@redhat.com>
Cc: Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
Cc: Ian Kent <raven@themaw.net>
Signed-Off-By: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-25 15:08:26 -07:00
Miklos Szeredi c3021629a0 fuse: support splice() reading from fuse device
Allow userspace filesystem implementation to use splice() to read from
the fuse device.

The userspace filesystem can now transfer data coming from a WRITE
request to an arbitrary file descriptor (regular file, block device or
socket) without having to go through a userspace buffer.

The semantics of using splice() to read messages are:

 1)  with a single splice() call move the whole message from the fuse
     device to a temporary pipe
 2)  read the header from the pipe and determine the message type
 3a) if message is a WRITE then splice data from pipe to destination
 3b) else read rest of message to userspace buffer

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2010-05-25 15:06:07 +02:00
Miklos Szeredi ce534fb052 fuse: allow splice to move pages
When splicing buffers to the fuse device with SPLICE_F_MOVE, try to
move pages from the pipe buffer into the page cache.  This allows
populating the fuse filesystem's cache without ever touching the page
contents, i.e. zero copy read capability.

The following steps are performed when trying to move a page into the
page cache:

 - buf->ops->confirm() to make sure the new page is uptodate
 - buf->ops->steal() to try to remove the new page from it's previous place
 - remove_from_page_cache() on the old page
 - add_to_page_cache_locked() on the new page

If any of the above steps fail (non fatally) then the code falls back
to copying the page.  In particular ->steal() will fail if there are
external references (other than the page cache and the pipe buffer) to
the page.

Also since the remove_from_page_cache() + add_to_page_cache_locked()
are non-atomic it is possible that the page cache is repopulated in
between the two and add_to_page_cache_locked() will fail.  This could
be fixed by creating a new atomic replace_page_cache_page() function.

fuse_readpages_end() needed to be reworked so it works even if
page->mapping is NULL for some or all pages which can happen if the
add_to_page_cache_locked() failed.

A number of sanity checks were added to make sure the stolen pages
don't have weird flags set, etc...  These could be moved into generic
splice/steal code.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2010-05-25 15:06:07 +02:00
Miklos Szeredi dd3bb14f44 fuse: support splice() writing to fuse device
Allow userspace filesystem implementation to use splice() to write to
the fuse device.  The semantics of using splice() are:

 1) buffer the message header and data in a temporary pipe
 2) with a *single* splice() call move the message from the temporary pipe
    to the fuse device

The READ reply message has the most interesting use for this, since
now the data from an arbitrary file descriptor (which could be a
regular file, a block device or a socket) can be tranferred into the
fuse device without having to go through a userspace buffer.  It will
also allow zero copy moving of pages.

One caveat is that the protocol on the fuse device requires the length
of the whole message to be written into the header.  But the length of
the data transferred into the temporary pipe may not be known in
advance.  The current library implementation works around this by
using vmplice to write the header and modifying the header after
splicing the data into the pipe (error handling omitted):

	struct fuse_out_header out;

	iov.iov_base = &out;
	iov.iov_len = sizeof(struct fuse_out_header);
	vmsplice(pip[1], &iov, 1, 0);
	len = splice(input_fd, input_offset, pip[1], NULL, len, 0);
	/* retrospectively modify the header: */
	out.len = len + sizeof(struct fuse_out_header);
	splice(pip[0], NULL, fuse_chan_fd(req->ch), NULL, out.len, flags);

This works since vmsplice only saves a pointer to the data, it does
not copy the data itself.

Since pipes are currently limited to 16 pages and messages need to be
spliced atomically, the length of the data is limited to 15 pages (or
60kB for 4k pages).

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2010-05-25 15:06:06 +02:00
Miklos Szeredi b5dd328537 fuse: get page reference for readpages
Acquire a page ref on pages in ->readpages() and release them when the
read has finished.  Not acquiring a reference didn't seem to cause any
trouble since the page is locked and will not be kicked out of the
page cache during the read.

However the following patches will want to remove the page from the
cache so a separate ref is needed.  Making the reference in req->pages
explicit also makes the code easier to understand.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2010-05-25 15:06:06 +02:00
Miklos Szeredi 1bf94ca73e fuse: use get_user_pages_fast()
Replace uses of get_user_pages() with get_user_pages_fast().  It looks
nicer and should be faster in most cases.

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2010-05-25 15:06:06 +02:00
Dan Carpenter 4aa0edd294 fuse: remove unneeded variable
"map" isn't needed any more after: 0bd87182d3 "fuse: fix kunmap in
fuse_ioctl_copy_user" 

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2010-05-25 15:06:05 +02:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Jiri Kosina 318ae2edc3 Merge branch 'for-next' into for-linus
Conflicts:
	Documentation/filesystems/proc.txt
	arch/arm/mach-u300/include/mach/debug-macro.S
	drivers/net/qlge/qlge_ethtool.c
	drivers/net/qlge/qlge_main.c
	drivers/net/typhoon.c
2010-03-08 16:55:37 +01:00
Linus Torvalds 60f8a8d4c6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: fix large stack use
  fuse: cleanup in fuse_notify_inval_...()
2010-03-03 08:08:21 -08:00
Daniel Mack 3ad2f3fbb9 tree-wide: Assorted spelling fixes
In particular, several occurances of funny versions of 'success',
'unknown', 'therefore', 'acknowledge', 'argument', 'achieve', 'address',
'beginning', 'desirable', 'separate' and 'necessary' are fixed.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Joe Perches <joe@perches.com>
Cc: Junio C Hamano <gitster@pobox.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-02-09 11:13:56 +01:00
Fang Wenqi b2d82ee3c8 fuse: fix large stack use
gcc 4.4 warns about:
  fs/fuse/dev.c: In function ‘fuse_notify_inval_entry’:
  fs/fuse/dev.c:925: warning: the frame size of 1060 bytes is larger than 1024 bytes

The problem is we declare two structures and a large array on the stack,
I move the array alway from the stack and allocate memory for it dynamically.

Signed-off-by: Fang Wenqi <antonf@turbolinux.com.cn>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2010-02-05 12:08:31 +01:00
Miklos Szeredi b21dda438b fuse: cleanup in fuse_notify_inval_...()
Small cleanup in fuse_notify_inval_inode() and
fuse_notify_inval_entry().

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2010-02-05 12:08:31 +01:00
anfei zhou 931e80e4b3 mm: flush dcache before writing into page to avoid alias
The cache alias problem will happen if the changes of user shared mapping
is not flushed before copying, then user and kernel mapping may be mapped
into two different cache line, it is impossible to guarantee the coherence
after iov_iter_copy_from_user_atomic.  So the right steps should be:

	flush_dcache_page(page);
	kmap_atomic(page);
	write to page;
	kunmap_atomic(page);
	flush_dcache_page(page);

More precisely, we might create two new APIs flush_dcache_user_page and
flush_dcache_kern_page to replace the two flush_dcache_page accordingly.

Here is a snippet tested on omap2430 with VIPT cache, and I think it is
not ARM-specific:

	int val = 0x11111111;
	fd = open("abc", O_RDWR);
	addr = mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0);
	*(addr+0) = 0x44444444;
	tmp = *(addr+0);
	*(addr+1) = 0x77777777;
	write(fd, &val, sizeof(int));
	close(fd);

The results are not always 0x11111111 0x77777777 at the beginning as expected.  Sometimes we see 0x44444444 0x77777777.

Signed-off-by: Anfei <anfei.zhou@gmail.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Miklos Szeredi <miklos@szeredi.hu>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: <linux-arch@vger.kernel.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-02-02 18:11:21 -08:00
Csaba Henk 1b7323965a fuse: reject O_DIRECT flag also in fuse_create
The comment in fuse_open about O_DIRECT:

  "VFS checks this, but only _after_ ->open()"

also holds for fuse_create, however, the same kind of check was missing there.

As an impact of this bug, open(newfile, O_RDWR|O_CREAT|O_DIRECT) fails, but a
stub newfile will remain if the fuse server handled the implied FUSE_CREATE
request appropriately.

Other impact: in the above situation ima_file_free() will complain to open/free
imbalance if CONFIG_IMA is set.

Signed-off-by: Csaba Henk <csaba@gluster.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Harshavardhana <harsha@gluster.com>
Cc: stable@kernel.org
2009-11-27 16:37:13 +01:00
Miklos Szeredi 5219f346b0 fuse: invalidate target of rename
Invalidate the target's attributes, which may have changed (such as
nlink, change time) so that they are refreshed on the next getattr().

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2009-11-04 10:24:52 +01:00
Jens Axboe 0bd87182d3 fuse: fix kunmap in fuse_ioctl_copy_user
Looks like another victim of the confusing kmap() vs kmap_atomic() API
differences.

Reported-by: Todor Gyumyushev <yodor1@gmail.com>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: stable@kernel.org
2009-11-04 10:24:51 +01:00
Anand V. Avati f60311d5f7 fuse: prevent fuse_put_request on invalid pointer
fuse_direct_io() has a loop where requests are allocated in each
iteration. if allocation fails, the loop is broken out and follows
into an unconditional fuse_put_request() on that invalid pointer.

Signed-off-by: Anand V. Avati <avati@gluster.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Cc: stable@kernel.org
2009-11-04 10:24:50 +01:00
Alexey Dobriyan f0f37e2f77 const: mark struct vm_struct_operations
* mark struct vm_area_struct::vm_ops as const
* mark vm_ops in AGP code

But leave TTM code alone, something is fishy there with global vm_ops
being used.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-27 11:39:25 -07:00
npiggin@suse.de c08d3b0e33 truncate: use new helpers
Update some fs code to make use of new helper functions introduced
in the previous patch. Should be no significant change in behaviour
(except CIFS now calls send_sig under i_lock, via inode_newsize_ok).

Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Miklos Szeredi <miklos@szeredi.hu>
Cc: linux-nfs@vger.kernel.org
Cc: Trond.Myklebust@netapp.com
Cc: linux-cifs-client@lists.samba.org
Cc: sfrench@samba.org
Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2009-09-24 08:41:47 -04:00
Linus Torvalds 9eead2a811 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse:
  fuse: add fusectl interface to max_background
  fuse: limit user-specified values of max background requests
  fuse: use drop_nlink() instead of direct nlink manipulation
  fuse: document protocol version negotiation
  fuse: make the number of max background requests and congestion threshold tunable
2009-09-18 09:23:03 -07:00
Jens Axboe 32a88aa1b6 fs: Assign bdi in super_block
We do this automatically in get_sb_bdev() from the set_bdev_super()
callback. Filesystems that have their own private backing_dev_info
must assign that in ->fill_super().

Note that ->s_bdi assignment is required for proper writeback!

Acked-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2009-09-16 15:18:51 +02:00
Csaba Henk 79a9d99434 fuse: add fusectl interface to max_background
Make the max_background and congestion_threshold parameters of a FUSE
mount tunable at runtime by adding the respective knobs to its directory
within the fusectl filesystem.

Signed-off-by: Csaba Henk <csaba@gluster.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
2009-09-16 14:15:29 +02:00