The sja1105 hardware has a quirk in that some changes require a switch
reset, which loses all configuration. When the reset is initiated,
everything needs to be reprogrammed, including the MACs and the PCS.
This is currently done in sja1105_static_config_reload() - we manually
call sja1105_adjust_port_config(), sja1105_sgmii_pcs_config() and
sja1105_sgmii_pcs_force_speed() which are all internal functions.
There is a desire for sja1105 to use the common xpcs driver, and that
means that the equivalents of those functions, xpcs_do_config() and
xpcs_link_up() respectively, will no longer be local functions.
Forcing phylink to retrigger a resolve somehow, say by doing dev_close()
followed by dev_open() is not really an option, because the CPU port
might have a PCS as well, and there is no net device which we can close
and reopen for that. Additionally, the dev_close/dev_open sequence might
force a renegotiation of the copper-side link for SGMII ports connected
to a PHY, and this is undesirable as well, because the switch reset is
much quicker than a PHY autoneg, so we would have a lot more downtime.
The only solution I see is for the sja1105 driver to keep doing what
it's doing, and that means we need to export the equivalents from xpcs
for sja1105_sgmii_pcs_config and sja1105_sgmii_pcs_force_speed, and call
them directly in sja1105_static_config_reload(). This will be done
during the conversion patch.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The NXP SJA1110 switch integrates its own, non-Synopsys PMA, but it
manages it through the register space of the XPCS itself, in a small
register window inside MDIO_MMD_VEND2 from address 0x8030 to 0x806e.
This coincides with where the registers for the default Synopsys PMA
are, but the register definitions are of course not the same.
This situation is an odd hardware quirk, but the simplest way to manage
it is to drive the SJA1110's PMA from within the XPCS driver.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The NXP SJA1105 DSA switch integrates a Synopsys SGMII XPCS on port 4.
The generic code works fine, except there is an integration issue which
needs to be dealt with: in this switch, the XPCS is integrated with a
PMA that has the TX lane polarity inverted by default (PLUS is MINUS,
MINUS is PLUS).
To obtain normal non-inverted behavior, the TX lane polarity must be
inverted in the PCS, via the DIGITAL_CONTROL_2 register.
We introduce a pma_config() method in xpcs_compat which is called by the
phylink_pcs_config() implementation.
Also, the NXP SJA1105 returns all zeroes in the PHY ID registers 2 and 3.
We need to hack up an ad-hoc PHY ID (OUI is zero, device ID is 1) in
order for the XPCS driver to recognize it. This PHY ID is added to the
public include/linux/pcs/pcs-xpcs.h for that reason (for the sja1105
driver to be able to use it in a later patch).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The struct mdio_xpcs_args is reminiscent of when a similarly named
struct mdio_xpcs_ops existed. Now that that is removed, we can shorten
the name to dw_xpcs (dw for DesignWare).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
XPCS IP supports 2500BASEX as PHY interface. It is configured as
autonegotiation disable to cater for PHYs that does not supports 2500BASEX
autonegotiation.
v2: Add supported link speed masking.
v3: Restructure to introduce xpcs_config_2500basex() used to configure the
xpcs for 2.5G speeds. Added 2500BASEX specific information for
configuration.
v4: Fix indentation error
Signed-off-by: Voon Weifeng <weifeng.voon@intel.com>
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since all the remaining members of struct mdio_xpcs_ops have direct
equivalents in struct phylink_pcs_ops, it is about time we remove it
altogether.
Since the phylink ops return void, we need to remove the error
propagation from the various xpcs methods and simply print an error
message where appropriate.
Since xpcs_get_state_c73() detects link faults and attempts to reset the
link on its own by calling xpcs_config(), but xpcs_config() now has a
lot of phylink arguments which are not needed and cannot be simply
fabricated by anybody else except phylink, the actual implementation has
been moved into a smaller xpcs_do_config().
The const struct mdio_xpcs_ops *priv->hw->xpcs has been removed, so we
need to look at the struct mdio_xpcs_args pointer now as an indication
whether the port has an XPCS or not.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unify the 2 existing PCS drivers (lynx and xpcs) by doing a similar
thing on probe, which is to have a *_create function that takes a
struct mdio_device * given by the caller, and builds a private PCS
structure around that.
This changes stmmac to hold only a pointer to the xpcs, as opposed to
the full structure. This will be used in the next patch when struct
mdio_xpcs_ops is removed. Currently a pointer to struct mdio_xpcs_ops
is used as a shorthand to determine whether the port has an XPCS or not.
We can do the same now with the mdio_xpcs_args pointer.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to the other recently functions, it is not necessary for
xpcs_probe to be a function pointer, so export it so that it can be
called directly.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
There is no good reason why we need to go through:
stmmac_xpcs_config_eee
-> stmmac_do_callback
-> mdio_xpcs_ops->config_eee
-> xpcs_config_eee
when we can simply call xpcs_config_eee.
priv->hw->xpcs is of the type "const struct mdio_xpcs_ops *" and is used
as a placeholder/synonym for priv->plat->mdio_bus_data->has_xpcs. It is
done that way because the mdio_bus_data pointer might or might not be
populated in all stmmac instantiations.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Calling a function pointer with a single implementation through
struct mdio_xpcs_ops is clunky, and the stmmac_do_callback system forces
this to return int, even though it always returns zero.
Simply remove the "validate" function pointer from struct mdio_xpcs_ops
and replace it with an exported xpcs_validate symbol which is called
directly by stmmac.
priv->hw->xpcs is of the type "const struct mdio_xpcs_ops *" and is used
as a placeholder/synonym for priv->plat->mdio_bus_data->has_xpcs. It is
done that way because the mdio_bus_data pointer might or might not be
populated in all stmmac instantiations.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The operating mode of the driver is currently to populate its
struct mdio_xpcs_args::supported and struct mdio_xpcs_args::an_mode
statically in xpcs_probe(), based on the passed phy_interface_t,
and work with those.
However this is not the operation that phylink expects from a PCS
driver, because the port might be attached to an SFP cage that triggers
changes of the phy_interface_t dynamically as one SFP module is
unpluggged and another is plugged.
To migrate towards that model, the struct mdio_xpcs_args should not
cache anything related to the phy_interface_t, but just look up the
statically defined, const struct xpcs_compat structure corresponding to
the detected PCS OUI/model number.
So we delete the "supported" and "an_mode" members of struct
mdio_xpcs_args, and add the "id" structure there (since the ID is not
expected to change at runtime).
Since xpcs->supported is used deep in the code in _xpcs_config_aneg_c73(),
we need to modify some function headers to pass the xpcs_compat from all
callers. In turn, the xpcs_compat is always supplied externally to the
xpcs module:
- Most of the time by phylink
- In xpcs_probe() it is needed because xpcs_soft_reset() writes to
MDIO_MMD_PCS or to MDIO_MMD_VEND2 depending on whether an_mode is clause
37 or clause 73. In order to not introduce functional changes related
to when the soft reset is issued, we continue to require the initial
phy_interface_t argument to be passed to xpcs_probe() so we can pass
this on to xpcs_soft_reset().
- stmmac_open() wants to know whether to call stmmac_init_phy() or not,
and for that it looks inside xpcs->an_mode, because the clause 73
(backplane) AN modes supposedly do not have a PHY. Because we moved
an_mode outside of struct mdio_xpcs_args, this is now no longer
directly possible, so we introduce a helper function xpcs_get_an_mode()
which protects the data encapsulation of the xpcs module and requires
a phy_interface_t to be passed as argument. This function can look up
the appropriate compat based on the phy_interface_t.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
CONFIG_STMMAC_ETH selects CONFIG_PCS_XPCS, so there should be no
situation where the shim should be needed.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add DWC xpcs EEE support callbacks.The callback function is used to
set EEE registers on xpcs.
xpcs transparent mode is enabled to allow PHY to detect MAC EEE status.
Signed-off-by: Michael Sit Wei Hong <michael.wei.hong.sit@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
XPCS IP supports C37 SGMII AN process and it is used in intel multi-GbE
controller as MAC-side SGMII.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The current implementation for XPCS is validated for C73, so we rename them
to have _c73 suffix and introduce a set of functions to use an_mode flag
to switch between C73 and C37 AN later.
Signed-off-by: Ong Boon Leong <boon.leong.ong@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Create drivers/net/pcs and move the Synopsys DesignWare XPCS into the
new directory. Move the header file into a subdirectory
include/linux/pcs
Start a naming convention of all PCS files use the prefix pcs-, and
rename the XPCS files to fit.
v2:
Add include/linux/pcs
v4:
Fix include path in stmmac.
Remove PCS_DEVICES to avoid new prompts
Cc: Jose Abreu <Jose.Abreu@synopsys.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vladimir Oltean
Voon Weifeng
Michael Sit Wei Hong
Ong Boon Leong
Andrew Lunn