Граф коммитов

46 Коммитов

Автор SHA1 Сообщение Дата
Thomas Gleixner dced35aeb0 drivers: Final irq namespace conversion
Scripted with coccinelle.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-29 14:48:19 +02:00
John Stultz e428c6a277 RTC: Clean out UIE icotl implementations
With the generic RTC rework, the UIE mode irqs are handled
in the generic layer, and only hardware specific ioctls
get passed down to the rtc driver layer.

So this patch removes the UIE mode ioctl handling in the rtc
driver layer, which never get used.

CC: Thomas Gleixner <tglx@linutronix.de>
CC: Alessandro Zummo <a.zummo@towertech.it>
CC: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
CC: rtc-linux@googlegroups.com
Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-03-09 11:24:54 -08:00
John Stultz 696160fec1 RTC: Cleanup rtc_class_ops->irq_set_freq()
With the generic rtc code now emulating PIE mode irqs via an
hrtimer, no one calls the rtc_class_ops->irq_set_freq call.

This patch removes the hook and deletes the driver functions
if no one else calls them.

CC: Thomas Gleixner <tglx@linutronix.de>
CC: Alessandro Zummo <a.zummo@towertech.it>
CC: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
CC: rtc-linux@googlegroups.com
Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-03-09 11:23:35 -08:00
John Stultz 80d4bb515b RTC: Cleanup rtc_class_ops->irq_set_state
With PIE mode interrupts now emulated in generic code via an hrtimer,
no one calls rtc_class_ops->irq_set_state(), so this patch removes it
along with driver implementations.

CC: Thomas Gleixner <tglx@linutronix.de>
CC: Alessandro Zummo <a.zummo@towertech.it>
CC: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
CC: rtc-linux@googlegroups.com
Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-03-09 11:23:34 -08:00
John Stultz 16380c153a RTC: Convert rtc drivers to use the alarm_irq_enable method
Some rtc drivers use the ioctl method instead of the alarm_irq_enable
method for enabling alarm interupts. With the new virtualized RTC
rework, its important for drivers to use the alarm_irq_enable instead.

This patch converts the drivers that use the AIE ioctl method to
use the alarm_irq_enable method. Other ioctl cmds are left untouched.

I have not been able to test or even compile most of these drivers.
Any help to make sure this change is correct would be appreciated!

CC: Alessandro Zummo <a.zummo@towertech.it>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
Reported-by: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
Tested-by: Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-02-03 13:02:35 -08:00
Axel Lin 899be96db7 rtc: rtc-sh - fix a memory leak
request_mem_region() will call kzalloc to allocate memory for struct resource.
release_resource() unregisters the resource but does not free the allocated
memory, thus use release_mem_region() instead to fix the memory leak.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2010-11-08 15:08:42 +09:00
Tejun Heo 5a0e3ad6af include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h
percpu.h is included by sched.h and module.h and thus ends up being
included when building most .c files.  percpu.h includes slab.h which
in turn includes gfp.h making everything defined by the two files
universally available and complicating inclusion dependencies.

percpu.h -> slab.h dependency is about to be removed.  Prepare for
this change by updating users of gfp and slab facilities include those
headers directly instead of assuming availability.  As this conversion
needs to touch large number of source files, the following script is
used as the basis of conversion.

  http://userweb.kernel.org/~tj/misc/slabh-sweep.py

The script does the followings.

* Scan files for gfp and slab usages and update includes such that
  only the necessary includes are there.  ie. if only gfp is used,
  gfp.h, if slab is used, slab.h.

* When the script inserts a new include, it looks at the include
  blocks and try to put the new include such that its order conforms
  to its surrounding.  It's put in the include block which contains
  core kernel includes, in the same order that the rest are ordered -
  alphabetical, Christmas tree, rev-Xmas-tree or at the end if there
  doesn't seem to be any matching order.

* If the script can't find a place to put a new include (mostly
  because the file doesn't have fitting include block), it prints out
  an error message indicating which .h file needs to be added to the
  file.

The conversion was done in the following steps.

1. The initial automatic conversion of all .c files updated slightly
   over 4000 files, deleting around 700 includes and adding ~480 gfp.h
   and ~3000 slab.h inclusions.  The script emitted errors for ~400
   files.

2. Each error was manually checked.  Some didn't need the inclusion,
   some needed manual addition while adding it to implementation .h or
   embedding .c file was more appropriate for others.  This step added
   inclusions to around 150 files.

3. The script was run again and the output was compared to the edits
   from #2 to make sure no file was left behind.

4. Several build tests were done and a couple of problems were fixed.
   e.g. lib/decompress_*.c used malloc/free() wrappers around slab
   APIs requiring slab.h to be added manually.

5. The script was run on all .h files but without automatically
   editing them as sprinkling gfp.h and slab.h inclusions around .h
   files could easily lead to inclusion dependency hell.  Most gfp.h
   inclusion directives were ignored as stuff from gfp.h was usually
   wildly available and often used in preprocessor macros.  Each
   slab.h inclusion directive was examined and added manually as
   necessary.

6. percpu.h was updated not to include slab.h.

7. Build test were done on the following configurations and failures
   were fixed.  CONFIG_GCOV_KERNEL was turned off for all tests (as my
   distributed build env didn't work with gcov compiles) and a few
   more options had to be turned off depending on archs to make things
   build (like ipr on powerpc/64 which failed due to missing writeq).

   * x86 and x86_64 UP and SMP allmodconfig and a custom test config.
   * powerpc and powerpc64 SMP allmodconfig
   * sparc and sparc64 SMP allmodconfig
   * ia64 SMP allmodconfig
   * s390 SMP allmodconfig
   * alpha SMP allmodconfig
   * um on x86_64 SMP allmodconfig

8. percpu.h modifications were reverted so that it could be applied as
   a separate patch and serve as bisection point.

Given the fact that I had only a couple of failures from tests on step
6, I'm fairly confident about the coverage of this conversion patch.
If there is a breakage, it's likely to be something in one of the arch
headers which should be easily discoverable easily on most builds of
the specific arch.

Signed-off-by: Tejun Heo <tj@kernel.org>
Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-30 22:02:32 +09:00
Alexey Dobriyan 471452104b const: constify remaining dev_pm_ops
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-12-15 08:53:25 -08:00
Paul Mundt 1043bf5c95 rtc: rtc-sh: Fix up oops in early periodic freq assignment.
With the reordered init order, the rtc device is not registered until
later, while sh_rtc_irq_set_freq() was attempting to assign ->irq_freq
directly, resulting in an oops. This is handled by the upper layers for
us, so just kill off the problematic dereference completely.

Reported-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-09 12:13:01 +09:00
Alessandro Zummo 5c9740a8b7 rtc: rtc-sh fixes
- simplifies irq set freq
- ioctl() was duplicating functionalities of rtc-dev core
- corrected initialization sequence
- use platform_driver_probe

Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: Angelo Castello <angelo.castello@st.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Jamie Lenehan <lenehan@twibble.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-20 13:25:11 +09:00
Paul Mundt 063adc7502 rtc: rtc-sh: clock framework support.
This adds clock framework support to the rtc-sh driver. With this in
place, platforms can default to leaving the clock disabled rather than
placing it in the always enabled state.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-16 14:12:22 +09:00
Magnus Damm faa9fa8e44 rtc: rtc-sh: use set_irq_wake()
Modify the sh_rtc driver to use set_irq_wake() during suspend
and resume. These functions are used to enable the rtc interrupts
in the interrupt controller so the rtc can be used to wakeup the
system from suspend.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-04-02 11:21:17 +09:00
Magnus Damm 7a8fe8e320 sh: sh-rtc wakeup support
Flag that the SuperH RTC supports wakeup.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-20 18:57:35 +09:00
Magnus Damm edf22477da sh: sh-rtc invalid time rework
This patch modifies invalid time handling in the
SuperH RTC driver. Instead of zeroing the returned
value at read-out time we just return an error code
and reset invalid values during probe.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-20 18:57:30 +09:00
Magnus Damm 9cd88b90a6 sh: sh-rtc carry interrupt rework
This patch modifies the SuperH RTC driver to only
enable carry interrupts when needed. So by default
no interrupts are enabled with this patch. Without
this patch a suspending system will most likely
wake up by the carry interrupt regardless if the
alarm interrupt has been enabled or not.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-20 18:56:50 +09:00
Paul Mundt e26b926a56 rtc: rtc-sh: Bump version up to reflect single IRQ support changes.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-03-06 18:51:33 +09:00
Magnus Damm 5e084a1586 rtc: sh-rtc: Add Single IRQ Support
Add support for single IRQ hardware to the sh-rtc driver.

This is useful for processors with limited interrupt masking
support such as sh7750 and sh7780. With this patch in place we
can add logic to the intc code that merges all RTC vectors into
a single linux interrupt with proper masking/unmasking support.

Specify a single IRQ in the platform data to use this new shared
IRQ feature. Separate Periodic/Carry/Alarm IRQs are still supported.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-02-27 16:50:00 +09:00
Jonathan Cameron 5d2a50371d rtc: move power of 2 periodic frequency check down into drivers
Move the power of 2 check on frequencies down into individual rtc drivers

This is to allow for non power of 2 real time clock periodic interrupts
such as those on the pxa27x to be found in the new pxa27x-rtc driver

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:24 -08:00
Anton Vorontsov 2fac6674dd rtc: bunch of drivers: fix 'no irq' case handing
This patch fixes a bunch of irq checking misuses.  Most drivers were
getting irq via platform_get_irq(), which returns -ENXIO or r->start.

rtc-cmos.c is special.  It is using PNP and platform bindings.  Hopefully
nobody is using PNP IRQ 0 for RTC.  So the changes should be safe.

rtc-sh.c is using platform_get_irq, but was storing a result into an
unsigned type, then was checking for < 0.  This is fixed now.

Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Acked-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-06 15:59:23 -08:00
Linus Torvalds ed402af3c2 Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (112 commits)
  sh: Move SH-4 CPU headers down one more level.
  sh: Only build in gpio.o when CONFIG_GENERIC_GPIO is selected.
  sh: Migrate common board headers to mach-common/.
  sh: Move the CPU definition headers from asm/ to cpu/.
  serial: sh-sci: Add support SCIF of SH7723
  video: add sh_mobile_lcdc platform flags
  video: remove unused sh_mobile_lcdc platform data
  sh: remove consistent alloc cruft
  sh: add dynamic crash base address support
  sh: reduce Migo-R smc91x overruns
  sh: Fix up some merge damage.
  Fix debugfs_create_file's error checking method for arch/sh/mm/
  Fix debugfs_create_dir's error checking method for arch/sh/kernel/
  sh: ap325rxa: Add support RTC RX-8564LC in AP325RXA board
  sh: Use sh7720 GPIO on magicpanelr2 board
  sh: Add sh7720 pinmux code
  sh: Use sh7203 GPIO on rsk7203 board
  sh: Add sh7203 pinmux code
  sh: Use sh7723 GPIO on AP325RXA board
  sh: Add sh7723 pinmux code
  ...
2008-10-20 09:13:34 -07:00
Adrian Bunk fe20ba70ab drivers/rtc/: use bcd2bin/bin2bcd
Change drivers/rtc/ to use the new bcd2bin/bin2bcd functions instead of
the obsolete BCD_TO_BIN/BIN_TO_BCD/BCD2BIN/BIN2BCD macros.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Cc: David Brownell <david-b@pacbell.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-20 08:52:41 -07:00
Paul Mundt 4cb40f795a Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
Conflicts:

	Documentation/kernel-parameters.txt
	arch/sh/include/asm/elf.h
2008-10-20 11:17:52 +09:00
David Brownell 743e6a504f rtc: file close() consistently disables repeating irqs
Make the rtc framework consistent about disabling 1/second update IRQs
that may have been activated through the /dev interface, when that /dev
file is closed.  (It may have closed because of coredump, etc.) This was
previously done only for emulated update IRQs ...  now, do it always.

Also comment the current policy: repeating IRQs (periodic, update) that
userspace enabled will be cleanly disabled, but alarms are left alone.
Such repeating IRQs are a constant and pointless system load.

Update some RTC drivers to remove now-needless release() methods.  Most
such methods just enforce that policy.  The others all seem to be buggy,
and mistreat in-kernel clients of periodic or alarm IRQs.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Andrew Sharp <andy.sharp@onstor.com>
Cc: Angelo Castello <angelo.castello@st.com>
Acked-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Thomas Hommel <thomas.hommel@gefanuc.com>
Acked-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-16 11:21:40 -07:00
roel kluin 2641dc92b3 rtc-sh: Unsigned rtc->{periodic,carry,alarm}_irq cannot be negative
possibly since commit b420b1a7a1

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-09-11 14:59:24 +09:00
Paul Mundt 0305794c7a rtc: rtc-sh: Fixup for 64-bit resources.
ioremap() and friends get the size information right, so force everything
to go through there.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-05-08 19:51:45 +09:00
Harvey Harrison 2a4e2b8780 rtc: replace remaining __FUNCTION__ occurrences
__FUNCTION__ is gcc-specific, use __func__

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28 08:58:17 -07:00
Angelo Castello b420b1a7a1 rtc: rtc-sh: Add support for periodic IRQs.
This adds support for periodic IRQs to the rtc-sh driver.
RTC_IRQP_READ/RTC_IRQP_SET are added, with a number of other fixes and
reordering across the rest of the code.

Signed-off-by: Angelo Castello <angelo.castello@st.com>
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-04-18 09:50:01 -07:00
Kay Sievers ad28a07bca rtc: fix platform driver hotplug/coldplug
Since 43cc71eed1, the platform modalias is
prefixed with "platform:".  Add MODULE_ALIAS() to the hotpluggable RTC
platform drivers, to re-enable module auto loading.

[dbrownell@users.sourceforge.net: more drivers, minor fix]
Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Cc: Greg KH <greg@kroah.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-11 08:06:44 -07:00
Paul Mundt c019fd8839 rtc: rtc-sh: Split out the CPU defs to asm/cpu/.
With all of the different CPU types this was getting a but unwieldly.
Since sh64 is now integrated, we don't have to worry about multiple
architectures caring about the header definitions.

Split out the defs for each asm/cpu/ to make rtc-sh slightly less
visually offensive.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:58 +09:00
Paul Mundt ff1b750605 rtc: rtc-sh: SH-2A support.
Trivial support for the SH-2A on-chip RTC.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:57 +09:00
Paul Mundt 9a519f62a1 rtc: rtc-sh: SH-5 support.
Trivial support for the SH-5 (sh64) on-chip RTC.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-01-28 13:18:38 +09:00
Paul Mundt 0ac554b9be rtc: rtc-sh: Zero out tm value for invalid rtc states.
Follows the changes of some of the other RTC drivers. If the tm
value is bogus, just zero it out. Adds some sanity for RTC_RD_TIME.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07 20:13:24 +09:00
Paul Mundt 29dd0dae50 rtc: sh-rtc: Handle rtc_device_register() failure properly.
Currently if rtc_device_register() fails we have an IS_ERR() on
the wrong pointer, which causes this to always be skipped. Fix
this up to actually check the right pointer. The return value
was always correct, even though the check was wrong.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-11-07 14:58:09 +09:00
Paul Mundt ad89f87a84 rtc: rtc-sh: Support 4-digit year on SH7705/SH7710/SH7712.
All SH-4 parts have a 4-digit year, while the SH-3 parts typically
only use a 2-digit one. The SH7705, SH7710, and SH7712 SH-3 parts
however opted to extend it to 4-digit and still look and act like
an SH-3 RTC in all other ways.

This adds a capability flag (RTC_CAP_4_DIGIT_YEAR) that these
corner-case CPU subtypes can set in their platform data and cleans
up some of the ifdef mess in the driver as a result.

Reported-by: Markus Brunner <super.firetwister@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-09-21 11:57:47 +09:00
Markus Brunner 699bc6614f rtc: rtc-sh: Correct sh_rtc_set_time() for some SH-3 parts.
Some SH-3 parts (SH7720 and SH7705 at least) need to have the
start bit explicitly cleared, as the reset is not enough. This
is safe across all parts, so simply clear the start bit in
the sh_rtc_set_time() path.

Signed-off-by: Markus Brunner <super.firetwister@gmail.com>
Signed-off by: Mark Jonas <toertel@gmail.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-26 17:31:28 +09:00
Paul Mundt a361a68bc5 rtc: rtc-sh: Fix rtc_dev pointer for rtc_update_irq().
When the rtc_update_irq() callsites stopped passing in the
class_dev, the rtc_dev references weren't fixed. Fix it up,
so we pass in the proper pointer.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-09 12:37:53 +09:00
Paul Mundt 435c55d1ef rtc: rtc-sh: Fix up dev_dbg() warnings.
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-05-09 01:35:00 +00:00
David Brownell ab6a2d70d1 rtc: rtc interfaces don't use class_device
This patch removes class_device from the programming interface that the RTC
framework exposes to the rest of the kernel.  Now an rtc_device is passed,
which is more type-safe and streamlines all the relevant code.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-By: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-08 11:15:18 -07:00
Jamie Lenehan 15c945c3d0 [PATCH] rtc-sh: act on rtc_wkalrm.enabled when setting an alarm
This fixes the SH rtc driver correctly act on the "enabled" flag when
setting an alarm.

Signed-off-by: Jamie Lenehan <lenehan@twibble.org>
Cc: David Brownell <david-b@pacbell.net>
Cc: Alessandro Zummo <alessandro.zummo@towertech.it>
Cc: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-23 07:52:06 -08:00
David Brownell 0d103e90f6 [PATCH] rtc-sh: correctly report rtc_wkalrm.enabled
This fixes the SH rtc driver to
  (a) correctly report 'enabled' status with other alarm status;
  (b) not duplicate that status in its procfs dump

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Acked-by: Paul Mundt <lethal@linux-sh.org>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2007-01-11 18:18:20 -08:00
Jamie Lenehan 1b73e6ae45 rtc: rtc-sh: alarm support.
This adds alarm support for the RTC_ALM_SET, RTC_ALM_READ,
RTC_WKALM_SET and RTC_WKALM_RD operations to rtc-sh.

The only unusual part is the handling of the alarm interrupt. If you
clear the alarm flag (AF) while the time in the RTC still matches the
time in the alarm registers than AF is immediately re-set, and if the
alarm interrupt (AIE) is still enabled then it re-triggers. I was
originally getting around 20k+ interrupts generated during the second
when the RTC and alarm registers matches.

The solution I've used is to clear AIE when the alarm goes off and
then use the carry interrupt to re-enabled it. The carry interrupt
will check AF and re-enabled AIE if it's clear. If AF is not clear
it'll clear it and then the check will be repeated next carry
interrupt. This a bit in rtc structure that indicates that it's
waiting to have AIE re-enabled so it doesn't turn it on when it
wasn't enabled anyway.

Signed-off-by: Jamie Lenehan <lenehan@twibble.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12 08:42:08 +09:00
Jamie Lenehan a16147965c rtc: rtc-sh: fix rtc for out-by-one for the month.
The RMONCNT register, which holds the month in the RTC, takes a value
between 1 and 12 while the tm_mon field in the time structures takes
a value between 0 and 11. This wasn't being taken into account in
rtc-sh resulting in the month being out by one.

eg, on my board during boot the RTC is set to:

  RTC is set to Thu Jul 01 09:00:00 1999

but "hwclock -r" immediately after logging in was showing:

  Sun Aug  1 09:01:43 1999  0.000000 seconds

Signed-off-by: Jamie Lenehan <lenehan@twibble.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12 08:42:08 +09:00
Jamie Lenehan 31ccb081ec rtc: rtc-sh: fix for period rtc interrupts.
When testing the per second interrupt support (RTC_UIE_ON/RTC_UIE_OFF)
of the new RTC system it would die in sh_rtc_interrupt due to a null
ptr dereference. The following gets it working correctly.

Signed-off-by: Jamie Lenehan <lenehan@twibble.org>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-12-12 08:42:07 +09:00
Paul Mundt 35f3c5185b sh: Updates for IRQ handler changes.
Trivial fixes for build breakage introduced by IRQ handler changes.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-10-06 15:31:16 +09:00
David Howells 7d12e780e0 IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:10:12 +01:00
Paul Mundt 317a6104a9 rtc: New RTC driver for SuperH On-Chip RTC.
This replaces the old SH RTC driver, and allows us to
clean quite a lot of things up on the board-specific
side.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 17:13:19 +09:00