Prior to commit ca0daa277a ("NFS: Cache aggressively when file is open
for writing"), NFS would revalidate, or invalidate, the file size when
taking a lock. Since that commit it only invalidates the file content.
If the file size is changed on the server while wait for the lock, the
client will have an incorrect understanding of the file size and could
corrupt data. This particularly happens when writing beyond the
(supposed) end of file and can be easily be demonstrated with
posix_fallocate().
If an application opens an empty file, waits for a write lock, and then
calls posix_fallocate(), glibc will determine that the underlying
filesystem doesn't support fallocate (assuming version 4.1 or earlier)
and will write out a '0' byte at the end of each 4K page in the region
being fallocated that is after the end of the file.
NFS will (usually) detect that these writes are beyond EOF and will
expand them to cover the whole page, and then will merge the pages.
Consequently, NFS will write out large blocks of zeroes beyond where it
thought EOF was. If EOF had moved, the pre-existing part of the file
will be over-written. Locking should have protected against this,
but it doesn't.
This patch restores the use of nfs_zap_caches() which invalidated the
cached attributes. When posix_fallocate() asks for the file size, the
request will go to the server and get a correct answer.
cc: stable@vger.kernel.org (v4.8+)
Fixes: ca0daa277a ("NFS: Cache aggressively when file is open for writing")
Signed-off-by: NeilBrown <neilb@suse.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
When there is no device to attach to the IOMMU domain, as may be the
case when the device-tree does not contain the proper iommu node, it is
best to keep going without IOMMU support rather than failing.
This allows the driver to probe and function instead of taking down
all of the tegra drm driver, leading to missing display support.
Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Fixes: 404bfb78da ("gpu: host1x: Add IOMMU support")
Reviewed-by: Mikko Perttunen <mperttunen@nvidia.com>
Tested-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170710193305.5987-1-contact@paulk.fr
dwmmc host driver already deprecate it in the driver
but didn't modify the documentation to reflect the fact.
This patch deprecates it and clean up num-slots from the
examples of all variant host drivers.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
Acked-by: Rob Herring <robh@kernel.org>
Fixes: d30a8f7bdf ("mmc: dw_mmc: deprecated the "num-slots" property")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This got missed when we open sourced this.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Change to print the information about when the deprecated "num-slots" DT
binding is being used, as to avoid confusion when browsing the log:
dwmmc_rockchip fe320000.dwmmc: 'num-slots' was deprecated.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Fixes: d30a8f7bdf ("mmc: dw_mmc: deprecated the "num-slots" property")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
When adding ethtool steering rule with action DISCARD we wrongly
pass a NULL dest with dest_num 1 to mlx5_add_flow_rules().
What this error seems to have caused is sending VPORT 0
(MLX5_FLOW_DESTINATION_TYPE_VPORT) as the fte dest instead of no dests.
We have fte action correctly set to DROP so it might been ignored
anyways.
To reproduce use:
# sudo ethtool --config-nfc <dev> flow-type ether \
dst aa:bb:cc:dd:ee:ff action -1
Fixes: 74491de937 ("net/mlx5: Add multi dest support")
Signed-off-by: Paul Blakey <paulb@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
This is done in order to ensure that work will not run after the cleanup.
Fixes: ef9814deaf ('net/mlx5e: Add HW timestamping (TS) support')
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The overflow_period is calculated in seconds. In order to use it
for delayed work scheduling translation to jiffies is needed.
Fixes: ef9814deaf ('net/mlx5e: Add HW timestamping (TS) support')
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Add the missing option to enable the PTP_CLK_PPS function.
In this case pin should be configured as 1PPS IN first and
then it will be connected to PPS mechanism.
Events will be reported as PTP_CLOCK_PPSUSR events to relevant sysfs.
Fixes: ee7f12205a ('net/mlx5e: Implement 1PPS support')
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
In order to fix the drift in 1PPS out need to adjust the next pulse.
On each 1PPS out falling edge driver gets the event, then the event
handler adjusts the next pulse starting time.
Fixes: ee7f12205a ('net/mlx5e: Implement 1PPS support')
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Need to disable the MTPPS and unsubscribe from the pulse events
when user disables the 1PPS functionality.
Fixes: ee7f12205a ('net/mlx5e: Implement 1PPS support')
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
In order to mark relevant fields while setting the MTPPS register
add field select. Otherwise it can cause a misconfiguration in
firmware.
Fixes: ee7f12205a ('net/mlx5e: Implement 1PPS support')
Signed-off-by: Eugenia Emantayev <eugenia@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
outer_header_zero() routine checks if the outer_headers match of a
flow-table entry are all zero.
This function uses the size of whole fte_match_param, instead of just
the outer_headers member, causing failure to detect all-zeros if
any other members of the fte_match_param are non-zero.
Use the correct size for zero check.
Fixes: 6dc6071cfc ("net/mlx5e: Add ethtool flow steering support")
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
On interface remove, the clean-up was done incorrectly causing
an error in the log:
"SET_FLOW_TABLE_ROOT(0x92f) op_mod(0x0) failed...syndrome (0x7e9f14)"
This was caused by the following flow:
-ndo_uninit:
Move QP state to RST (this disconnects the QP from FT),
the QP cannot be attached to any FT unless it is in RTS.
-mlx5_rdma_netdev_free:
cleanup_rx: Destroy FT
cleanup_tx: Destroy QP and remove QPN from FT
This caused a problem when destroying current FT we tried to
re-attach the QP to the next FT which is not needed.
The correct flow is:
-mlx5_rdma_netdev_free:
cleanup_rx: remove QPN from FT & Destroy FT
cleanup_tx: Destroy QP
Fixes: 508541146a ("net/mlx5: Use underlay QPN from the root name space")
Signed-off-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
When driver fail to allocate an entry to send command to FW, it must
notify the calling function and release the memory allocated for
this command.
Fixes: e126ba97db ('mlx5: Add driver for Mellanox Connect-IB adapters')
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Cc: kernel-team@fb.com
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Completion on timeout should not free the driver command entry structure
as it will need to access it again once real completion event from FW
will occur.
Fixes: 73dd3a4839 ('net/mlx5: Avoid using pending command interface slots')
Signed-off-by: Moshe Shemesh <moshe@mellanox.com>
Cc: kernel-team@fb.com
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The tx_enabled lag event field is used to determine whether a slave is
active.
Current logic uses this value only if the mode is active-backup.
However, LACP mode, although considered a load balancing mode, can mark
a slave as inactive in certain situations (e.g., LACP timeout).
This fix takes the tx_enabled value into account when remapping, with
no respect to the LAG mode (this should not affect the behavior in XOR
mode, since in this mode both slaves are marked as active).
Fixes: 7907f23adc (net/mlx5: Implement RoCE LAG feature)
Signed-off-by: Aviv Heller <avivh@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Upon sriov enable, eswitch is always enabled.
Currently, if enable hca failed over all VFs, we would skip eswitch
disable as part of sriov disable, which will lead to resources leak.
Fix it by disabling eswitch if it was enabled (use indication from
eswitch mode).
Fixes: 6b6adee3da ('net/mlx5: SRIOV core code refactoring')
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Noa Osherovich <noaos@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
That commit was part of the changes moving x86 to the generic CPU hotplug
interrupt migration code. The force flag was required on x86 before the
hierarchical irqdomain rework, but invoking set_affinity() with force=true
stayed and had no side effects.
At some point in the past, the force flag got repurposed to support the
exynos timer interrupt affinity setting to a not yet online CPU, so the
interrupt controller callback does not verify the supplied affinity mask
against cpu_online_mask.
Setting the flag in the CPU hotplug code causes the cpu online masking to
be blocked on these irq controllers and results in potentially affining an
interrupt to the CPU which is unplugged, i.e. instead of moving it away,
it's just reassigned to it.
As the force flags is not longer needed on x86, it's safe to revert that
patch so the ARM irqchips which use the force flag work again.
Add comments to that effect, so this won't happen again.
Note: The online mask handling should be done in the generic code and the
force flag and the masking in the irq chips removed all together, but
that's not a change possible for 4.13.
Fixes: 77f85e66aa ("genirq/cpuhotplug: Set force affinity flag on hotplug migration")
Reported-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Will Deacon <will.deacon@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: LAK <linux-arm-kernel@lists.infradead.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.20.1707271217590.3109@nanos
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Now that the CCU device tree binding headers have been merged, we can
use the properly named macros in the device tree, instead of raw
numbers.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The datasheet said that emac register size is 0x10000 not 0x100
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
[wens@csie.org: Fixed commit subject prefix]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The datasheet said that emac register size is 0x10000 not 0x104
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
[wens@csie.org: Fixed commit subject prefix]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Since the PMU register interface is banked per CPU, CPU PMU interrrupts
cannot be handled by a CPU other than the one with the PMU asserting the
interrupt. This means that migrating PMU SPIs, as we do during a CPU
hotplug operation doesn't make any sense and can lead to the IRQ being
disabled entirely if we route a spurious IRQ to the new affinity target.
This has been observed in practice on AMD Seattle, where CPUs on the
non-boot cluster appear to take a spurious PMU IRQ when coming online,
which is routed to CPU0 where it cannot be handled.
This patch passes IRQF_PERCPU for PMU SPIs and forcefully sets their
affinity prior to requesting them, ensuring that they cannot
be migrated during hotplug events. This interacts badly with the DB8500
erratum workaround that ping-pongs the interrupt affinity from the handler,
so we avoid passing IRQF_PERCPU in that case by allowing the IRQ flags
to be overridden in the platdata.
Fixes: 3cf7ee98b8 ("drivers/perf: arm_pmu: move irq request/free into probe")
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
sa1100 provides its own variant of the clk API rather than using the
generic COMMON_CLK API. This generally works, but it causes some link
errors with drivers using the clk_set_rate, clk_get_parent, clk_set_parent
or clk_round_rate functions when a platform lacks those interfaces.
This adds trivial stub implementations for each of them, based on
the behavior of the COMMON_CLK implementation:
- set_rate() and set_parent() report success without doing anything
- round_rate() returns the clk rate
- get_parent() returns NULL.
This adds the minimal bloat and should do the right thing for
the simple clock hardware in this SoC.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
davinci still has its own clk implementation, but lacks
a clk_get_parent() helper, which can lead to link errors
in randconfig builds.
This adds the usual implementation.
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In commit 3169663ac5 "ARM: sa11x0/pxa: convert OS timer registers
to IOMEM", the definition of the OSCR macro was changed to be an
__iomem pointer, but the same register is also used by the XIP
code. This patch does the corresponding change here as well.
On PXA, the IRQ register definitions were removed even earlier, in
commit 5d284e353e ("ARM: pxa: avoid accessing interrupt registers
directly"). This patch unfortunately brings some of that back. An
earlier version of my patch moved the code into an external function,
which could not work for CONFIG_XIP_KERNEL+CONFIG_MTD_XIP, so this
restores something close to the original code.
Link: http://lists.infradead.org/pipermail/linux-arm-kernel/2014-March/241716.html
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A change to the platform data definitions caused a warning in the board code:
arch/arm/mach-davinci/board-da850-evm.c:1221:13: warning: initialization discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
arch/arm/mach-davinci/board-da850-evm.c:1231:13: warning: initialization discards ‘const’ qualifier from pointer target type [-Wdiscarded-qualifiers]
This is a bit unfortunate, since we generally like structure definitions to
be const, but as this is legacy code, the easiest way out is still to
remove the 'const' annotation here.
Fixes: 4a5f8ae50b ("[media] davinci: vpif_capture: get subdevs from DT when available")
Fixes: 231ce279e6 ("ARM: davinci: fix const warnings")
Acked-by: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The ZTE SoC drivers are only useful when building for a ZTE ZX platform.
Fixes: 4c2c2e3971 ("soc: zte: pm_domains: Prepare for supporting ARMv8 zx2967 family")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Baoyou Xie <baoyou.xie@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Due to a bugfix in wireless tree and the commit mentioned below a merge
was needed which went haywire. So the submitted change resulted in the
function brcmf_sdiod_sgtable_alloc() being called twice during the probe
thus leaking the memory of the first call.
Cc: stable@vger.kernel.org # 4.6.x
Fixes: 4d79289598 ("brcmfmac: switch to new platform data")
Reported-by: Stefan Wahren <stefan.wahren@i2se.com>
Tested-by: Stefan Wahren <stefan.wahren@i2se.com>
Reviewed-by: Hante Meuleman <hante.meuleman@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
The commit to rework the headroom check in start_xmit() now calls
pxskb_expand_head() unconditionally if the header is CoW. Unfortunately,
it does so with the delta between the extant headroom and the header
length, which may be negative if there is already sufficient headroom.
pskb_expand_head() does allow for size being 0, in which case it just
copies, so clamp the header delta to zero.
Opening Chrome (and all my tabs) on a PCIE device was enough to reliably
hit this.
Fixes: 270a6c1f65 ("brcmfmac: rework headroom check in .start_xmit()")
Signed-off-by: Daniel Stone <daniels@collabora.com>
Cc: Arend Van Spriel <arend.vanspriel@broadcom.com>
Cc: James Hughes <james.hughes@raspberrypi.org>
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Cc: Pieter-Paul Giesberts <pieter-paul.giesberts@broadcom.com>
Cc: Franky Lin <franky.lin@broadcom.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Drop the unused endpoints. They should only be used when there is an
actual remote-endpoint connected.
Cc: Sekhar Nori <nsekhar@ti.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Drop the unused endpoints. They should only be used when there is
an actual remote-endpoint connected.
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
- Fix wrong irq type for gpio expeander on Armada 388 GP
- Use __pa_symbol instead of virt_to_phys in the mv98dx3236 platform
SMP code
-----BEGIN PGP SIGNATURE-----
iIEEABECAEEWIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCWW3X4iMcZ3JlZ29yeS5j
bGVtZW50QGZyZWUtZWxlY3Ryb25zLmNvbQAKCRALBhiOFHI71e78AJ4+wNdgOn6C
8PVxz97Ngx2L0O44AgCfXWXbhHye3y4p2wfLfFTBT1prMZ4=
=gydP
-----END PGP SIGNATURE-----
Merge tag 'mvebu-fixes-4.13-1' of git://git.infradead.org/linux-mvebu into fixes
Pull "mvebu fixes for 4.13 (part 1)" from Gregory CLEMENT:
- Fix wrong irq type for gpio expeander on Armada 388 GP
- Use __pa_symbol instead of virt_to_phys in the mv98dx3236 platform
SMP code
* tag 'mvebu-fixes-4.13-1' of git://git.infradead.org/linux-mvebu:
ARM: dts: armada-38x: Fix irq type for pca955
ARM: mvebu: use __pa_symbol in the mv98dx3236 platform SMP code
Add necessary parent clocks for audss (Audio SubSystem, MAUDIO) clock
controller block.
This allows driver to keep EPLL enabled before accessing any MAUDIO
registers thus fixing silent hang. This silent hang appeared with
commit 6edfa11cb3 ("clk: samsung: Add enable/disable operation for
PLL36XX clocks"), e.g. on Odroid U3 usually with last (but unrelated)
messages:
[ 2.382741] input: gpio_keys as /devices/platform/gpio_keys/input/input0
[ 2.405686] usb 1-3: new high-speed USB device number 3 using exynos-ehci
[ 2.419843] max77686-rtc max77686-rtc: setting system clock to 2017-06-21 17:04:13 UTC (1498064653)
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Correct order of sound clock frequencies for ULCB boards
used by r8a7795 and r8a7796 SoCs.
These sounds clock frequencies are used as the ADG clock (output clocks
for audio module) initial setting and sound codec's initial system clock
which needs the maximum clock frequency. Thus, descending order is
required.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=bjUb
-----END PGP SIGNATURE-----
Merge tag 'renesas-fixes2-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes
Pull "Second Round of Renesas ARM Based SoC Fixes for v4.13" from Simon Horman:
Correct order of sound clock frequencies for ULCB boards
used by r8a7795 and r8a7796 SoCs.
These sounds clock frequencies are used as the ADG clock (output clocks
for audio module) initial setting and sound codec's initial system clock
which needs the maximum clock frequency. Thus, descending order is
required.
* tag 'renesas-fixes2-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: dts: renesas: ulcb: sound clock-frequency needs descending order
- Fix disable_irq related shared IRQ warnings for omap3 PRM
- Fix omap4 legacy code regression that accidentally removed code that
we still need for PRM interrupts
- Fix dm8168-evm NAND pins and MMC write protect pin direction
- Fix dra71-evm mdio impedance values
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAvFiEEkgNvrZJU/QSQYIcQG9Q+yVyrpXMFAlld8MERHHRvbnlAYXRv
bWlkZS5jb20ACgkQG9Q+yVyrpXPnxRAAkGl1Q0HYGFl6+0YCLzk4jAD8Tx3T8kS6
Y+zaXkUowyQj548Sx55hSbCfxIyJETF2VBFWbMVMeNaDE1Gge+2rj6NdELAP1olu
cOIuRlJt4R6xBXRhJKMu4yA2DqslOD6C2rNM6B0qmNFoO+O4/9uhYZEAD03/RFRJ
8EXvr5lGjCfljEC/EgN7kfyPCOjU4aknbREZOUknQ/CMYm53G6FrNzppNNe0CVmj
59/Pp6lgYVPrBNXMpcD1LXu8fkOcp6vQ70h+WFLrdaf1GOZSj7SDHD50Lk2tNnN6
UWJ3aRE3cGnaNBwcnnrMkwMyIWBU6mEWSAOl/bQgf/jFiyFcgqDk+/i9POqGqzou
p3Jyn9of8Cg3SoIbImOsPODMgtesDmxy36nYcR+EH6x/mGDnwFzhxR74RB/X2ltq
RoeT8RbJxckz+h80Zjp6IbJQoJ6CcNqtPDiaf/GqsloSEYcUh51CBrP0teT51nFU
VZk9PRRsasIc7mpgyDg8jODZCtzvK0KTyTU3l6b6Oct7o8b/BOMAunKTAvujsT5Q
gqFCIJZ/iNTZ5GN8I6qEOTD4um5NFDl//tiQlVbU4/t/k2eUzlHErl0sc+ycv+N5
pRmz843Zs7U3lSithCF4/840BG7dQ0cTbx9binYtSCUOI9wKKORWz6ieKOf7mZi2
TR/Sqx+i0dI=
=ibLi
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.13/fixes-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Pull "Few fixes for omaps for issues found recently" from Tony Lindgren:
- Fix disable_irq related shared IRQ warnings for omap3 PRM
- Fix omap4 legacy code regression that accidentally removed code that
we still need for PRM interrupts
- Fix dm8168-evm NAND pins and MMC write protect pin direction
- Fix dra71-evm mdio impedance values
* tag 'omap-for-v4.13/fixes-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: dra71-evm: mdio: Fix impedance values
ARM: dts: dm816x: Correct the state of the write protect pin
ARM: dts: dm816x: Correct NAND support nodes
ARM: OMAP4: Fix legacy code clean-up regression
ARM: OMAP2+: Fix omap3 prm shared irq
Correct order of sound clock frequencies for Salvator boards
used by r8a7795 and r8a7796 SoCs.
These sounds clock frequencies are used as the ADG clock (output clocks
for audio module) initial setting and sound codec's initial system clock
which needs the maximum clock frequency. Thus, descending order is
required.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJZVhaCAAoJENfPZGlqN0++/zkP/1aHxFA560O3cb4SebIeJKQd
TQFd7YocK1lsqD6DP1ZLQI7ytPfpyAKPctKLRe2NSwr+kf5N8rbYUfZ88pBXe7ez
y9mbFBYcKHvDLrGHtW5hebBGB6HAh2Ll9DMW6Hqdsv8qG1/EqlLwBkA10/VSjaYk
Xfp4XnbyXsWCxbllU04We0uel945rg6tQy6VBszW5QEwMEX4zhaOsmi6z8nCv11E
k8Q6xl2/+FWc/zfivJSzBn59XjQSo+E54yRkmaYcteTY2+8Y787QMvVKkbUAvnHi
DrVplSPdbQPeZInqDiw97fvUNDTIzYatskMF3Lv6HFZ+u8YHTrW6yq2CShWtecUx
7BP8GgwfkLHt8J5PADMpNejzfE5lz+7EPm8+2jhGeoHd0BNjojaFvbyL01pJntwp
nJrSKlLmRB1CDEiubVPUUrY+EWcx7wxK0V8eliWTAn/o1ijJTErbRF91Z/U9BACF
PQUToBZ8MJKbjbrFXmelswkTwORV7au0KwY6Jzm2Vue7TiCZU4BXwyxZ1hmH3dI1
GLOWo5mtlXWcUnHLrPv44x6povNQDCtPGowTyKkqo2vXIAlAkMaG4V5D2tV9ykr7
d0UDWA44fF7QYcgW8hEd1eY0ILnYuX7Zanh0xvb5OBjqLEwsf+FvLel6/eMzg4Pj
tNB+iosh5YumUfCIue0D
=t800
-----END PGP SIGNATURE-----
Merge tag 'renesas-fixes-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes
Pull "Renesas ARM Based SoC Fixes for v4.13" from Simon Horman:
Correct order of sound clock frequencies for Salvator boards
used by r8a7795 and r8a7796 SoCs.
These sounds clock frequencies are used as the ADG clock (output clocks
for audio module) initial setting and sound codec's initial system clock
which needs the maximum clock frequency. Thus, descending order is
required.
* tag 'renesas-fixes-for-v4.13' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
arm64: renesas: salvator-common: sound clock-frequency needs descending order
Turns out that just writing CURPOS isn't sufficient to move the cursor
on some platforms. My 830 works just fine, but eg. 945 and PNV don't.
On those platforms we need to arm even the CURPOS update with a
CURBASE write.
Even worse, a write to any of the cursor register apart from CURBASE
will cancel an already pending cursor update. So if we have armed a
CURCNTR/CURBASE update, a subsequent CURPOS write prior to vblank
would cancel that armed update. Thus we're left with a cursor that
doesn't appear to move, or even change shape.
Fix the problem by always performing the CURBASE write after a
CURPOS write. Bspec is somewhat unclear which platforms actually
require this CURBASE write and which don't. So to keep it simple
and to make sure we really fix the problem across all supported
devices, let's just perform the CURBASE write unconditionally.
Cc: Paul Menzel <pmenzel@molgen.mpg.de>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101790
Fixes: 75343a44c9 ("drm/i915: Drop useless posting reads from cursor commit")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Tested-by: Paul Menzel <paulepanter@users.sourceforge.net>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20170714155227.6089-1-ville.syrjala@linux.intel.com
(cherry picked from commit 8753d2bc5e)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fix the sizeof(ptr) vs. sizeof(*ptr) typo.
Fixes: 2889caa923 ("drm/i915: Eliminate lots of iterations over the execobjects array")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170714151242.517-2-imre.deak@intel.com
(cherry picked from commit edd9003f7f)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Commit b1f5bfc27a ("sctp: don't dereference ptr before leaving
_sctp_walk_{params, errors}()") tried to fix the issue that it
may overstep the chunk end for _sctp_walk_{params, errors} with
'chunk_end > offset(length) + sizeof(length)'.
But it introduced a side effect: When processing INIT, it verifies
the chunks with 'param.v == chunk_end' after iterating all params
by sctp_walk_params(). With the check 'chunk_end > offset(length)
+ sizeof(length)', it would return when the last param is not yet
accessed. Because the last param usually is fwdtsn supported param
whose size is 4 and 'chunk_end == offset(length) + sizeof(length)'
This is a badly issue even causing sctp couldn't process 4-shakes.
Client would always get abort when connecting to server, due to
the failure of INIT chunk verification on server.
The patch is to use 'chunk_end <= offset(length) + sizeof(length)'
instead of 'chunk_end < offset(length) + sizeof(length)' for both
_sctp_walk_params and _sctp_walk_errors.
Fixes: b1f5bfc27a ("sctp: don't dereference ptr before leaving _sctp_walk_{params, errors}()")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In dccp_feat_init, when ccid_get_builtin_ccids failsto alloc
memory for rx.val, it should free tx.val before returning an
error.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The patch "dccp: fix a memleak that dccp_ipv6 doesn't put reqsk
properly" fixed reqsk refcnt leak for dccp_ipv6. The same issue
exists on dccp_ipv4.
This patch is to fix it for dccp_ipv4.
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In dccp_v6_conn_request, after reqsk gets alloced and hashed into
ehash table, reqsk's refcnt is set 3. one is for req->rsk_timer,
one is for hlist, and the other one is for current using.
The problem is when dccp_v6_conn_request returns and finishes using
reqsk, it doesn't put reqsk. This will cause reqsk refcnt leaks and
reqsk obj never gets freed.
Jianlin found this issue when running dccp_memleak.c in a loop, the
system memory would run out.
dccp_memleak.c:
int s1 = socket(PF_INET6, 6, IPPROTO_IP);
bind(s1, &sa1, 0x20);
listen(s1, 0x9);
int s2 = socket(PF_INET6, 6, IPPROTO_IP);
connect(s2, &sa1, 0x20);
close(s1);
close(s2);
This patch is to put the reqsk before dccp_v6_conn_request returns,
just as what tcp_conn_request does.
Reported-by: Jianlin Shi <jishi@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fixes: dad6f37c26 ("powerpc: subpage_protect: Increase the array size to take care of 64TB")
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Tested-by: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The rework of the exynos DRM clock handling introduced
warnings for configurations that have CONFIG_PM disabled:
drivers/gpu/drm/exynos/exynos_hdmi.c:736:13: error: 'hdmi_clk_disable_gates' defined but not used [-Werror=unused-function]
static void hdmi_clk_disable_gates(struct hdmi_context *hdata)
^~~~~~~~~~~~~~~~~~~~~~
drivers/gpu/drm/exynos/exynos_hdmi.c:717:12: error: 'hdmi_clk_enable_gates' defined but not used [-Werror=unused-function]
static int hdmi_clk_enable_gates(struct hdmi_context *hdata)
The problem is that the PM functions themselves are inside of
an #ifdef, but some functions they call are not.
This patch removes the #ifdef and instead marks the PM functions
as __maybe_unused, which is a more reliable way to get it right.
Link: https://patchwork.kernel.org/patch/8436281/
Fixes: 9be7e98984 ("drm/exynos/hdmi: clock code re-factoring")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
If the s5p-cec driver is a module and the drm exynos driver is built-in, then
the CEC core will be a module also, causing the CEC notifier to fail (will be
compiled as empty functions).
To prevent this select CEC_CORE if CEC_NOTIFIER is set to ensure the CEC core
is also built into the kernel.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The "Fixes" patch was incorrectly merged, as a result PHY is prematurely
powered off and for example Odroid-U3 cannot disable TV power domain
when HDMI cable is unplugged.
Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: 625e63e2 ("drm/exynos/hdmi: fix pipeline disable order")
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
This patch moves drm_bridge_add call into probe.
It doesn't need to call drm_bridge_add call every time
bind callback is called.
Changelog v2
- moved drm_bridge_remove call into remove callback.
- corrected description.
Suggested-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
NeilBrown
Paul Kocialkowski
Shawn Lin
Jens Axboe
Alex Deucher
Paul Blakey
Eugenia Emantayev
Ilan Tayari
Alex Vesker
Moshe Shemesh
Aviv Heller
Eran Ben Elisha
Thomas Gleixner
Chen-Yu Tsai
Corentin Labbe
Will Deacon
Arnd Bergmann
Geert Uytterhoeven
Arend Van Spriel
Daniel Stone
Kevin Hilman
Krzysztof Kozlowski
Ville Syrjälä
Imre Deak
Xin Long
Aneesh Kumar K.V
Hans Verkuil
Andrzej Hajda
Inki Dae