Need to be able to query the VCN firmware version from
userspace to determine supported features, etc.
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Older VCE FW versions are buggy and can't work with 48bit address
spaces.
RFC: Should we limit the address space or just reject loading the older
VCE firmware?
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reserve VA space at the top for older generations as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Monk Liu <monk.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add display to the name for consistency.
Signed-off-by: Samuel Li <Samuel.Li@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add display to the name for consistency.
Signed-off-by: Samuel Li <Samuel.Li@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add sub-queries for stable pstate shader/memory clock.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Start to always allocate a pasid for each VM.
v2: use dev_warn when we run out of PASIDs
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
And rename it to amdgpu_gmc as well.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Samuel Li <Samuel.Li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This driver can use drm_fb_helper_lastclose() in its .lastclose function.
It can also use drm_fb_helper_output_poll_changed() as its
.output_poll_changed callback.
Remove the unused driver implementations.
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Let userspace know how much area we have above the 48bit VA hole on
Vega10.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Similar to the CPU address space the VA on Vega10 has a hole in it.
v2: use dev_dbg instead of dev_err
v3: add some more comments to explain how the hw works
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
CC: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Retry at drm_dev_register instead of amdgpu_device_init.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Pixel Ding <Pixel.Ding@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The exclusive mode has real-time limitation in reality, such like being
done in 300ms. It's easy observed if running many VF/VMs in single host
with heavy CPU workload.
If we find the init fails due to exclusive mode timeout, try it again.
v2:
- rewrite the condition for readable value.
v3:
- fix typo, add comments for sleep
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: pding <Pixel.Ding@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
-----BEGIN PGP SIGNATURE-----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=0JS4
-----END PGP SIGNATURE-----
Merge tag 'drm-for-v4.15-amd-dc' of git://people.freedesktop.org/~airlied/linux
Pull amdgpu DC display code for Vega from Dave Airlie:
"This is the pull request for the AMD DC (display code) layer which is
a requirement to program the display engines on the new Vega and Raven
based GPUs. It also contains support for all amdgpu supported GPUs
(CIK, VI, Polaris), which has to be enabled. It is also a kms atomic
modesetting compatible driver (unlike the current in-tree display
code).
I've kept it separate from drm-next because it may have some things
that cause you to reject it.
Background story:
AMD have an internal team creating a shared OS codebase for display at
hw bring up time using information from their hardware teams. This
process doesn't lead to the most Linux friendly/looking code but we
have worked together on cleaning a lot of it up and dealing with
sparse/smatch/checkpatch, and having their team internally adhere to
Linux coding standards.
This tree is a complete history rebased since they started opening it,
we decided not to squash it down as the history may have some value.
Some of the commits therefore might not reach kernel standards, and we
are steadily training people in AMD to better write commit msgs.
There is a major bunch of generated bandwidth calculation and
verification code that comes from their hardware team. On Vega and
before this is float calculations, on Raven (DCN10) this is double
based. They do the required things to do FP in the kernel, and I could
understand this might raise some issues. Rewriting the bandwidth would
be a major undertaken in reverification, it's non-trivial to work out
if a display can handle the complete set of mode information thrown at
it.
Future story:
There is a TODO list with this, and it address most of the remaining
things that would be nice to refine/remove. The DCN10 code is still
under development internally and they push out a lot of patches quite
regularly and are supporting this code base with their display team. I
think we've reached the point where keeping it out of tree is going to
motivate distributions to start carrying the code, so I'd prefer we
get it in tree. I think this code is slightly better than STAGING
quality but not massively so, I'd really like to see that float/double
magic gone and fixed point used, but AMD don't seem to think the
accuracy and revalidation of the code is worth the effort"
* tag 'drm-for-v4.15-amd-dc' of git://people.freedesktop.org/~airlied/linux: (1110 commits)
drm/amd/display: fix MST link training fail division by 0
drm/amd/display: Fix formatting for null pointer dereference fix
drm/amd/display: Remove dangling planes on dc commit state
drm/amd/display: add flip_immediate to commit update for stream
drm/amd/display: Miss register MST encoder cbs
drm/amd/display: Fix warnings on S3 resume
drm/amd/display: use num_timing_generator instead of pipe_count
drm/amd/display: use configurable FBC option in dm
drm/amd/display: fix AZ clock not enabled before program AZ endpoint
amdgpu/dm: Don't use DRM_ERROR in amdgpu_dm_atomic_check
amd/display: Fix potential null dereference in dce_calcs.c
amdgpu/dm: Remove unused forward declaration
drm/amdgpu: Remove unused dc_stream from amdgpu_crtc
amdgpu/dc: Fix double unlock in amdgpu_dm_commit_planes
amdgpu/dc: Fix missing null checks in amdgpu_dm.c
amdgpu/dc: Fix potential null dereferences in amdgpu_dm.c
amdgpu/dc: fix more indentation warnings
amdgpu/dc: handle allocation failures in dc_commit_planes_to_stream.
amdgpu/dc: fix indentation warning from smatch.
amdgpu/dc: fix non-ansi function decls.
...
Allows userspace to figure out if VRAM was lost.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of per device track the VRAM lost per context and return ECANCELED
instead of ENODEV.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Keep blocking the CS, but revert everything else. Mapping BOs and info IOCTL
are harmless and can still happen even when VRAM content ist lost.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The AMDGPU_SCHED_OP_PROCESS_PRIORITY_OVERRIDE ioctls are used to set
the priority of a different process in the current system.
When a request is dropped, the process's contexts will be
restored to the priority specified at context creation time.
A request can be dropped by setting the override priority to
AMDGPU_CTX_PRIORITY_UNSET.
An fd is used to identify the remote process. This is simpler than
passing a pid number, which is vulnerable to re-use, etc.
This functionality is limited to DRM_MASTER since abuse of this
interface can have a negative impact on the system's performance.
v2: removed unused output structure
v3: change refcounted interface for a regular set operation
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Initial pull request for DC support. We've completed a substantial amount of
the cleanup and restructuring in our TODO. There are a few additional
cleanups that we are continuing to work on, but I don't think there are any
showstoppers remaining. We've tried to maintain most of the history for bisect
purposes. Harry made sure all the commits build. We've enabled DC for vega10
and Raven. Pre-vega10 parts can be enabled via module parameter (amdgpu.dc=1),
but are not enabled by default at this point until we get further testing
upstream.
This code provides atomic modesetting support for DCE8 (CIK), DCE10 (Tonga,
Fiji), DCE11 (CZ, ST, Polaris), DCE12 (vega10), and DCN1 (RV) including
HDMI and DP audio, DP MST, and many other advanced display features.
+
Latest cleanups for DC from you and Harry. Note that there is some
flickering on some older asics with this branch due to a regression in powerplay
that has already been fixed and will be included in my next non-DC pull request
next week.
* 'drm-next-4.15-dc' of git://people.freedesktop.org/~agd5f/linux: (897 commits)
amdgpu/dc: use kref for dc_state.
amdgpu/dc: convert dc_sink to kref.
amdgpu/dc: convert dc_stream_state to kref.
amdgpu/dc: use kref for dc_plane_state.
amdgpu/dc: convert dc_gamma to kref reference counting.
amdgpu/dc: convert dc_transfer to use a kref.
amdgpu/dc: kill a bunch of dead code.
amdgpu/dc: set a bunch of functions to static.
amdgpu/dc: kill some deadcode in dc core.
amdgpu/dc: fix indentation on a couple of returns.
amdgpu/dm: don't use after free.
amdgpu/dc: kfree already checks for NULL.
amdgpu/dc: fix a bunch of misc whitespace.
amdgpu/dc: drop hw_sequencer_types.h
amdgpu/dc: drop dce110_types.h
amdgpu/dc: use kernel ilog2 for log_2.
amdgpu/dc: don't memset after kzalloc.
amdgpu/dc: inline dal grph object id functions.
amdgpu/dc: inline dml_round_to_multiple
amdgpu/dc: rename bios get_image symbol to something more searchable.
...
for being able to convert an amdgpu fence into one of the handles.
Mesa will use this.
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Supported DCE versions: 8.0, 10.0, 11.0, 11.2
v2: rebase against 4.11
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allows assigning a PASID to a VM for identifying VMs involved in page
faults. The global PASID manager is also exported in the KFD
interface so that AMDGPU and KFD can share the PASID space.
PASIDs of different sizes can be requested. On APUs, the PASID size
is deterined by the capabilities of the IOMMU. So KFD must be able
to allocate PASIDs in a smaller range.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
adds fragment_size in the vm_manager structure and
implements hardware setup for it.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Move the CSA bo_va from the VM to the fpriv structure.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Looks like a better place for this.
v2: use atomic64_t members instead
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It doesn't make much sense to count those numbers twice.
v2: use and atomic64_t instead
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
kfd2kgd is device-specific, so it should not be a global variable.
Merge amdgpu_amdkfd_load_interface and amdgpu_amdkfd_device_probe
so that it's only needed as a local variable in one function.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Oded Gabbay <oded.gabbay@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The fragment bits work differently for Vega10 compared to previous generations.
Increase the fragment size to 2MB for now to better handle that.
v2: handle the hardware setup as well
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-and-tested-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Currently, get clock info from default clk of pm if dpm is disable.
Buf SRIOV doesn't support dpm and pm, can't get anything from pm.
Only get clock info only from default clk of amdgpu for SRIOV.
And driver get pm default clk also from amdgpu default clk and never
be changed by others. So use amdgpu default clk value for SRIOV
and non-dpm cases.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Use the TTM values instead of the hardware config here.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Newer asics with 4 SEs are not able to fit the entire bitmask in the
original field, use an array instead.
v2: keep cu_ao_mask for backward compatibility.
Signed-off-by: Flora Cui <Flora.Cui@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add VM update mode module param (amdgpu.vm_update_mode) that can used to
control how VM pde/pte are updated for Graphics and Compute.
BIT0 controls Graphics and BIT1 Compute.
BIT0 [= 0] Graphics updated by SDMA [= 1] by CPU
BIT1 [= 0] Compute updated by SDMA [= 1] by CPU
By default, only for large BAR system vm_update_mode = 2, indicating
that Graphics VMs will be updated via SDMA and Compute VMs will be
updated via CPU. And for all all other systems (by default)
vm_update_mode = 0
Signed-off-by: Harish Kasiviswanathan <Harish.Kasiviswanathan@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Even if CONFIG_DRM_AMDGPU_CIK is enabled.
There is no feature parity yet for CIK, in particular amdgpu doesn't
support HDMI/DisplayPort audio without DC.
v2:
* Clarify the lack of feature parity being related to HDMI/DP audio.
* Fix "SI" typo in DRM_AMDGPU_CIK help entry.
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
If AMDGPU supports SI, add a module parameter to control SI
support. It's off by default in AMDGPU as long as SI suppost is
experimental, while it is on by default in radeon.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
[ Michel Dänzer: Squash in amdgpu_si_support initialization fix ]
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
If AMDGPU supports CIK, add a module parameter to control CIK
support. It's on by default in AMDGPU, while it is off by default
in radeon.
Signed-off-by: Felix Kuehling <Felix.Kuehling@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
v2: bump the DRM version
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
below ioctl will return -ENODEV:
amdgpu_cs_ioctl
amdgpu_cs_wait_ioctl
amdgpu_cs_wait_fences_ioctl
amdgpu_gem_va_ioctl
amdgpu_info_ioctl
v2: only for map and replace cases in amdgpu_gem_va_ioctl
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Not required on raven.
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It will be used for reserving vmid for shader debugging
that requires a fixed vmid.
v2: fix warning (Alex)
Signed-off-by: Chunming Zhou <David1.Zhou@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
UAPI Changes:
- Return -ENODEV instead of -ENXIO when creating cma fb w/o valid gem (Daniel)
- Add aspect ratio and custom scaling propertis to connector state (Maarten)
Cross-subsystem Changes:
- None
Core Changes:
- Add Laurent as bridge reviewer and Andrzej as bridge maintainer (Archit)
- Maintain new STM driver through -misc (Yannick)
- Misc doc improvements (as is tradition) (Daniel)
- Add driver-private objects to atomic state (Dhinakaran)
- Deprecate preclose hook in modern drivers (use postclose) (Daniel)
- Add hwmode to vblank struct. This fixes mode access in irq context and reduced
a bunch of boilerplate (Daniel)
Driver Changes:
- vc4: Add out-fence support to vc4 V3D rendering (Eric)
- stm: Add stm32f429 display hw and am-480272h3tmqw-t01h panel support (Yannick)
- vc4: Remove 256MB cma limit from vc4 (Eric)
- dw-hdmi: Disable audio when inactive, instead of always enabled (Romain)
- zte: Add support for VGA to the ZTE driver (Shawn)
- i915: Track DP MST bandwidth and check it in atomic_check (Dhinakaran)
- vgem: Enable gem dmabuf import iface to facilitate ion testing (Laura)
- vc4: Add support for Cygnus (new dt compat string + couple bug fixes) (Eric)
- pl111: Add driver for pl111 CLCD display controller (Eric/Tom)
- vgem: Subclass drm_device instead of standalone platform device (Chris)
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Yannick Fertre <yannick.fertre@st.com>
Cc: Romain Perier <romain.perier@collabora.com>
Cc: Navare, Manasi D <manasi.d.navare@intel.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tom Cooksey <tom.cooksey@arm.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
* tag 'drm-misc-next-2017-05-16' of git://anongit.freedesktop.org/git/drm-misc: (72 commits)
drm: add missing declaration to drm_blend.h
drm/dp: Wait up all outstanding tx waiters
drm/dp: Read the tx msg state once after checking for an event
drm/prime: Forward declare struct device
drm/vblank: Lock down vblank->hwmode more
drm/vblank: drop the mode argument from drm_calc_vbltimestamp_from_scanoutpos
drm/vblank: Add FIXME comments about moving the vblank ts hooks
drm/vblank: Switch to bool in_vblank_irq in get_vblank_timestamp
drm/vblank: Switch drm_driver->get_vblank_timestamp to return a bool
drm/vgem: Convert to a struct drm_device subclass
gpu: drm: gma500: remove dead code
drm/sti: Adjust two checks for null pointers in sti_hqvdp_probe()
drm/sti: Fix typos in a comment line
drm/sti: Fix a typo in a comment line
drm/sti: Replace 17 seq_puts() calls by seq_putc()
drm/sti: Reduce function calls for sequence output at five places
drm/sti: use seq_puts to display a string
drm: Nerf the preclose callback for modern drivers
drm/exynos: Merge pre/postclose hooks
drm/tegra: switch to postclose
...
If we restrict this helper to only kms drivers (which is the case) we
can look up the correct mode easily ourselves. But it's a bit tricky:
- All legacy drivers look at crtc->hwmode. But that is updated already
at the beginning of the modeset helper, which means when we disable
a pipe. Hence the final timestamps might be a bit off. But since
this is an existing bug I'm not going to change it, but just try to
be bug-for-bug compatible with the current code. This only applies
to radeon&amdgpu.
- i915 tries to get it perfect by updating crtc->hwmode when the pipe
is off (i.e. vblank->enabled = false).
- All other atomic drivers look at crtc->state->adjusted_mode. Those
that look at state->requested_mode simply don't adjust their mode,
so it's the same. That has two problems: Accessing crtc->state from
interrupt handling code is unsafe, and it's updated before we shut
down the pipe. For nonblocking modesets it's even worse.
For atomic drivers try to implement what i915 does. To do that we add
a new hwmode field to the vblank structure, and update it from
drm_calc_timestamping_constants(). For atomic drivers that's called
from the right spot by the helper library already, so all fine. But
for safety let's enforce that.
For legacy driver this function is only called at the end (oh the
fun), which is broken, so again let's not bother and just stay
bug-for-bug compatible.
The benefit is that we can use drm_calc_vbltimestamp_from_scanoutpos
directly to implement ->get_vblank_timestamp in every driver, deleting
a lot of code.
v2: Completely new approach, trying to mimick the i915 solution.
v3: Fixup kerneldoc.
v4: Drop the WARN_ON to check that the vblank is off, atomic helpers
currently unconditionally call this. Recomputing the same stuff should
be harmless.
v5: Fix typos and move misplaced hunks to the right patches (Neil).
v6: Undo hunk movement (kbuild).
Cc: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Cc: Eric Anholt <eric@anholt.net>
Cc: Rob Clark <robdclark@gmail.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170509140329.24114-4-daniel.vetter@ffwll.ch
It's overkill to have a flag parameter which is essentially used just
as a boolean. This takes care of core + adjusting drivers.
Adjusting the scanout position callback is a bit harder, since radeon
also supplies it's own driver-private flags in there.
v2: Fixup misplaced hunks (Neil).
v3: kbuild says v1 was better ...
Cc: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Cc: Eric Anholt <eric@anholt.net>
Cc: Rob Clark <robdclark@gmail.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170509140329.24114-2-daniel.vetter@ffwll.ch
There's really no reason for anything more:
- Calling this while the crtc vblank stuff isn't set up is a driver
bug. Those places alrready DRM_ERROR.
- Calling this when the crtc is off is either a driver bug (calling
drm_crtc_handle_vblank at the wrong time) or a core bug (for
anything else). Again, we DRM_ERROR.
- EINVAL is checked at higher levels already, and if we'd use struct
drm_crtc * instead of (dev, pipe) it would be real obvious that
those are again core bugs.
The only valid failure mode is crap hardware that couldn't sample a
useful timestamp, to ask the core to just grab a not-so-accurate
timestamp. Bool is perfectly fine for that.
v2: Also fix up the one caller, I lost that in the shuffling (Jani).
v3: Fixup commit message (Neil).
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Cc: Eric Anholt <eric@anholt.net>
Cc: Rob Clark <robdclark@gmail.com>
Cc: linux-arm-msm@vger.kernel.org
Cc: freedreno@lists.freedesktop.org
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170509140329.24114-1-daniel.vetter@ffwll.ch
alpha:allmodconfig fails to build as follows.
drivers/gpu/drm/amd/amdgpu/amdgpu.h:1006:2: error:
expected identifier before '(' token
drivers/gpu/drm/amd/amdgpu/amdgpu.h:1011:28: error:
'NGG_BUF_MAX' undeclared here
The problem is not really the enum definition of NGG_BUF_MAX but PARAM,
which happens to be defined differently for alpha and a couple of other
architectures.
Use less generic defines for NGG enums to solve the problem.
Fixes: bce23e00f3 ("drm/amdgpu: add NGG parameters")
Cc: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
We already have this info: max_gs_threads. Drop the duplicate.
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher
Christian König
Samuel Li
Rex Zhu
Noralf Trønnes
Pixel Ding
Linus Torvalds
Andres Rodriguez
Dave Airlie
Marek Olšák
Harry Wentland
Monk Liu
Felix Kuehling
Roger He
Xiangliang Yu
Flora Cui
Harish Kasiviswanathan
Michel Dänzer
Chunming Zhou
Leo Liu
Daniel Vetter
Guenter Roeck