Граф коммитов

170 Коммитов

Автор SHA1 Сообщение Дата
Huw Davies 3f09354ac8 netlabel: Implement CALIPSO config functions for SMACK.
SMACK uses similar functions to control CIPSO, these are
the equivalent functions for CALIPSO and follow exactly
the same semantics.

int netlbl_cfg_calipso_add(struct calipso_doi *doi_def,
                           struct netlbl_audit *audit_info)
    Adds a CALIPSO doi.

void netlbl_cfg_calipso_del(u32 doi, struct netlbl_audit *audit_info)
    Removes a CALIPSO doi.

int netlbl_cfg_calipso_map_add(u32 doi, const char *domain,
                               const struct in6_addr *addr,
                               const struct in6_addr *mask,
                               struct netlbl_audit *audit_info)
    Creates a mapping between a domain and a CALIPSO doi.  If
    addr and mask are non-NULL this creates an address-selector
    type mapping.

This also extends netlbl_cfg_map_del() to remove IPv6 address-selector
mappings.

Signed-off-by: Huw Davies <huw@codeweavers.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-06-27 15:06:18 -04:00
Huw Davies 4fee5242bf calipso: Add a label cache.
This works in exactly the same way as the CIPSO label cache.
The idea is to allow the lsm to cache the result of a secattr
lookup so that it doesn't need to perform the lookup for
every skbuff.

It introduces two sysctl controls:
 calipso_cache_enable - enables/disables the cache.
 calipso_cache_bucket_size - sets the size of a cache bucket.

Signed-off-by: Huw Davies <huw@codeweavers.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-06-27 15:06:17 -04:00
Huw Davies a04e71f631 netlabel: Pass a family parameter to netlbl_skbuff_err().
This makes it possible to route the error to the appropriate
labelling engine.  CALIPSO is far less verbose than CIPSO
when encountering a bogus packet, so there is no need for a
CALIPSO error handler.

Signed-off-by: Huw Davies <huw@codeweavers.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-06-27 15:06:16 -04:00
Huw Davies 2917f57b6b calipso: Allow the lsm to label the skbuff directly.
In some cases, the lsm needs to add the label to the skbuff directly.
A NF_INET_LOCAL_OUT IPv6 hook is added to selinux to match the IPv4
behaviour.  This allows selinux to label the skbuffs that it requires.

Signed-off-by: Huw Davies <huw@codeweavers.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-06-27 15:06:15 -04:00
Huw Davies e1adea9270 calipso: Allow request sockets to be relabelled by the lsm.
Request sockets need to have a label that takes into account the
incoming connection as well as their parent's label.  This is used
for the outgoing SYN-ACK and for their child full-socket.

Signed-off-by: Huw Davies <huw@codeweavers.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-06-27 15:05:29 -04:00
Huw Davies ceba1832b1 calipso: Set the calipso socket label to match the secattr.
CALIPSO is a hop-by-hop IPv6 option.  A lot of this patch is based on
the equivalent CISPO code.  The main difference is due to manipulating
the options in the hop-by-hop header.

Signed-off-by: Huw Davies <huw@codeweavers.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-06-27 15:02:51 -04:00
Huw Davies 3faa8f982f netlabel: Move bitmap manipulation functions to the NetLabel core.
This is to allow the CALIPSO labelling engine to use these.

Signed-off-by: Huw Davies <huw@codeweavers.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-06-27 15:02:51 -04:00
Huw Davies d7cce01504 netlabel: Add support for removing a CALIPSO DOI.
Remove a specified DOI through the NLBL_CALIPSO_C_REMOVE command.
It requires the attribute:
 NLBL_CALIPSO_A_DOI.

Signed-off-by: Huw Davies <huw@codeweavers.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-06-27 15:02:49 -04:00
Huw Davies dc7de73f19 netlabel: Add support for creating a CALIPSO protocol domain mapping.
This extends the NLBL_MGMT_C_ADD and NLBL_MGMT_C_ADDDEF commands
to accept CALIPSO protocol DOIs.

Signed-off-by: Huw Davies <huw@codeweavers.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-06-27 15:02:49 -04:00
Huw Davies e1ce69df7e netlabel: Add support for enumerating the CALIPSO DOI list.
Enumerate the DOI list through the NLBL_CALIPSO_C_LISTALL command.
It takes no attributes.

Signed-off-by: Huw Davies <huw@codeweavers.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-06-27 15:02:48 -04:00
Huw Davies a5e34490c3 netlabel: Add support for querying a CALIPSO DOI.
Query a specified DOI through the NLBL_CALIPSO_C_LIST command.
It requires the attribute:
 NLBL_CALIPSO_A_DOI.

The reply will contain:
 NLBL_CALIPSO_A_MTYPE

Signed-off-by: Huw Davies <huw@codeweavers.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-06-27 15:02:47 -04:00
Huw Davies cb72d38211 netlabel: Initial support for the CALIPSO netlink protocol.
CALIPSO is a packet labelling protocol for IPv6 which is very similar
to CIPSO.  It is specified in RFC 5570.  Much of the code is based on
the current CIPSO code.

This adds support for adding passthrough-type CALIPSO DOIs through the
NLBL_CALIPSO_C_ADD command.  It requires attributes:

 NLBL_CALIPSO_A_TYPE which must be CALIPSO_MAP_PASS.
 NLBL_CALIPSO_A_DOI.

In passthrough mode the CALIPSO engine will map MLS secattr levels
and categories directly to the packet label.

At this stage, the major difference between this and the CIPSO
code is that IPv6 may be compiled as a module.  To allow for
this the CALIPSO functions are registered at module init time.

Signed-off-by: Huw Davies <huw@codeweavers.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-06-27 15:02:46 -04:00
Huw Davies 8f18e675c3 netlabel: Add an address family to domain hash entries.
The reason is to allow different labelling protocols for
different address families with the same domain.

This requires the addition of an address family attribute
in the netlink communication protocol.  It is used in several
messages:

NLBL_MGMT_C_ADD and NLBL_MGMT_C_ADDDEF take it as an optional
attribute for the unlabelled protocol.  It may be one of AF_INET,
AF_INET6 or AF_UNSPEC (to specify both address families).  If it
is missing, it defaults to AF_UNSPEC.

NLBL_MGMT_C_LISTALL and NLBL_MGMT_C_LISTDEF return it as part of
the enumeration of each item.  Addtionally, it may be sent to
LISTDEF to specify which address family to return.

Signed-off-by: Huw Davies <huw@codeweavers.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-06-27 15:02:46 -04:00
Huw Davies 96a8f7f88d netlabel: Mark rcu pointers with __rcu.
This fixes sparse errors of the form:
  incompatible types in comparison expression (different address spaces)

Signed-off-by: Huw Davies <huw@codeweavers.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-06-27 15:02:45 -04:00
Paul Moore 50b8629a60 netlabel: handle sparse category maps in netlbl_catmap_getlong()
In cases where the category bitmap is sparse enough that gaps exist
between netlbl_lsm_catmap structs, callers to netlbl_catmap_getlong()
could find themselves prematurely ending their search through the
category bitmap.  Further, the methods used to calculate the 'idx'
and 'off' values were incorrect for bitmaps this large.  This patch
changes the netlbl_catmap_getlong() behavior so that it always skips
over gaps and calculates the index and offset values correctly.

Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-06-09 10:56:02 -04:00
Paul Moore 0e0e367740 netlabel: add address family checks to netlbl_{sock,req}_delattr()
It seems risky to always rely on the caller to ensure the socket's
address family is correct before passing it to the NetLabel kAPI,
especially since we see at least one LSM which didn't. Add address
family checks to the *_delattr() functions to help prevent future
problems.

Cc: <stable@vger.kernel.org>
Reported-by: Maninder Singh <maninder1.s@samsung.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-06-06 15:17:20 -04:00
Janak Desai 341e0cb593 netlabel: fix a problem with netlbl_secattr_catmap_setrng()
We try to be clever and set large chunks of the bitmap at once, when
possible; unfortunately we weren't very clever when we wrote the code
and messed up the if-conditional.  Fix this bug and restore proper
operation.

Signed-off-by: Janak Desai <Janak.Desai@gtri.gatech.edu>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2016-04-05 16:10:47 -04:00
Wei Tang 8303394d81 netlabel: do not initialise statics to NULL
This patch fixes the checkpatch.pl error to netlabel_domainhash.c:

ERROR: do not initialise statics to NULL

Signed-off-by: Wei Tang <tangwei@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07 11:08:26 -05:00
Wei Tang 795f3512ca netlink: do not initialise statics to 0 or NULL
This patch fixes the checkpatch.pl error to netlabel_unlabeled.c:

ERROR: do not initialise statics to 0 or NULL

Signed-off-by: Wei Tang <tangwei@cmss.chinamobile.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-07 11:08:26 -05:00
Jiri Benc 930345ea63 netlink: implement nla_put_in_addr and nla_put_in6_addr
IP addresses are often stored in netlink attributes. Add generic functions
to do that.

For nla_put_in_addr, it would be nicer to pass struct in_addr but this is
not used universally throughout the kernel, in way too many places __be32 is
used to store IPv4 address.

Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-03-31 13:58:35 -04:00
Linus Torvalds 8cc748aa76 Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security
Pull security layer updates from James Morris:
 "Highlights:

   - Smack adds secmark support for Netfilter
   - /proc/keys is now mandatory if CONFIG_KEYS=y
   - TPM gets its own device class
   - Added TPM 2.0 support
   - Smack file hook rework (all Smack users should review this!)"

* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: (64 commits)
  cipso: don't use IPCB() to locate the CIPSO IP option
  SELinux: fix error code in policydb_init()
  selinux: add security in-core xattr support for pstore and debugfs
  selinux: quiet the filesystem labeling behavior message
  selinux: Remove unused function avc_sidcmp()
  ima: /proc/keys is now mandatory
  Smack: Repair netfilter dependency
  X.509: silence asn1 compiler debug output
  X.509: shut up about included cert for silent build
  KEYS: Make /proc/keys unconditional if CONFIG_KEYS=y
  MAINTAINERS: email update
  tpm/tpm_tis: Add missing ifdef CONFIG_ACPI for pnp_acpi_device
  smack: fix possible use after frees in task_security() callers
  smack: Add missing logging in bidirectional UDS connect check
  Smack: secmark support for netfilter
  Smack: Rework file hooks
  tpm: fix format string error in tpm-chip.c
  char/tpm/tpm_crb: fix build error
  smack: Fix a bidirectional UDS connect check typo
  smack: introduce a special case for tmpfs in smack_d_instantiate()
  ...
2015-02-11 20:25:11 -08:00
Paul Moore 04f81f0154 cipso: don't use IPCB() to locate the CIPSO IP option
Using the IPCB() macro to get the IPv4 options is convenient, but
unfortunately NetLabel often needs to examine the CIPSO option outside
of the scope of the IP layer in the stack.  While historically IPCB()
worked above the IP layer, due to the inclusion of the inet_skb_param
struct at the head of the {tcp,udp}_skb_cb structs, recent commit
971f10ec ("tcp: better TCP_SKB_CB layout to reduce cache line misses")
reordered the tcp_skb_cb struct and invalidated this IPCB() trick.

This patch fixes the problem by creating a new function,
cipso_v4_optptr(), which locates the CIPSO option inside the IP header
without calling IPCB().  Unfortunately, this isn't as fast as a simple
lookup so some additional tweaks were made to limit the use of this
new function.

Cc: <stable@vger.kernel.org> # 3.18
Reported-by: Casey Schaufler <casey@schaufler-ca.com>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Tested-by: Casey Schaufler <casey@schaufler-ca.com>
2015-02-11 14:46:37 -05:00
Markus Elfring 4de46d5ebc netlabel: Less function calls in netlbl_mgmt_add_common() after error detection
The functions "cipso_v4_doi_putdef" and "kfree" could be called in some cases
by the netlbl_mgmt_add_common() function during error handling even if the
passed variables contained still a null pointer.

* This implementation detail could be improved by adjustments for jump labels.

* Let us return immediately after the first failed function call according to
  the current Linux coding style convention.

* Let us delete also an unnecessary check for the variable "entry" there.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-03 16:22:13 -08:00
Markus Elfring 7a11b1d303 netlabel: Deletion of an unnecessary check before the function call "cipso_v4_doi_free"
The cipso_v4_doi_free() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-03 16:22:12 -08:00
Markus Elfring 79b7cf60e1 netlabel: Deletion of an unnecessary check before the function call "cipso_v4_doi_putdef"
The cipso_v4_doi_putdef() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-03 16:22:12 -08:00
Johannes Berg 053c095a82 netlink: make nlmsg_end() and genlmsg_end() void
Contrary to common expectations for an "int" return, these functions
return only a positive value -- if used correctly they cannot even
return 0 because the message header will necessarily be in the skb.

This makes the very common pattern of

  if (genlmsg_end(...) < 0) { ... }

be a whole bunch of dead code. Many places also simply do

  return nlmsg_end(...);

and the caller is expected to deal with it.

This also commonly (at least for me) causes errors, because it is very
common to write

  if (my_function(...))
    /* error condition */

and if my_function() does "return nlmsg_end()" this is of course wrong.

Additionally, there's not a single place in the kernel that actually
needs the message length returned, and if anyone needs it later then
it'll be very easy to just use skb->len there.

Remove this, and make the functions void. This removes a bunch of dead
code as described above. The patch adds lines because I did

-	return nlmsg_end(...);
+	nlmsg_end(...);
+	return 0;

I could have preserved all the function's return values by returning
skb->len, but instead I've audited all the places calling the affected
functions and found that none cared. A few places actually compared
the return value with <= 0 in dump functionality, but that could just
be changed to < 0 with no change in behaviour, so I opted for the more
efficient version.

One instance of the error I've made numerous times now is also present
in net/phonet/pn_netlink.c in the route_dumpit() function - it didn't
check for <0 or <=0 and thus broke out of the loop every single time.
I've preserved this since it will (I think) have caused the messages to
userspace to be formatted differently with just a single message for
every SKB returned to userspace. It's possible that this isn't needed
for the tools that actually use this, but I don't even know what they
are so couldn't test that changing this behaviour would be acceptable.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-18 01:03:45 -05:00
Fabian Frederick 59f35b810e netlabel: kernel-doc warning fix
no secid argument in netlbl_cfg_unlbl_static_del

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-09 01:40:05 -04:00
Fabian Frederick 16b99a4f66 netlabel: directly return netlbl_unlabel_genl_init()
No need to store netlbl_unlabel_genl_init result and test it before returning.

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-10-08 16:08:04 -04:00
Linus Torvalds ae045e2455 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking updates from David Miller:
 "Highlights:

   1) Steady transitioning of the BPF instructure to a generic spot so
      all kernel subsystems can make use of it, from Alexei Starovoitov.

   2) SFC driver supports busy polling, from Alexandre Rames.

   3) Take advantage of hash table in UDP multicast delivery, from David
      Held.

   4) Lighten locking, in particular by getting rid of the LRU lists, in
      inet frag handling.  From Florian Westphal.

   5) Add support for various RFC6458 control messages in SCTP, from
      Geir Ola Vaagland.

   6) Allow to filter bridge forwarding database dumps by device, from
      Jamal Hadi Salim.

   7) virtio-net also now supports busy polling, from Jason Wang.

   8) Some low level optimization tweaks in pktgen from Jesper Dangaard
      Brouer.

   9) Add support for ipv6 address generation modes, so that userland
      can have some input into the process.  From Jiri Pirko.

  10) Consolidate common TCP connection request code in ipv4 and ipv6,
      from Octavian Purdila.

  11) New ARP packet logger in netfilter, from Pablo Neira Ayuso.

  12) Generic resizable RCU hash table, with intial users in netlink and
      nftables.  From Thomas Graf.

  13) Maintain a name assignment type so that userspace can see where a
      network device name came from (enumerated by kernel, assigned
      explicitly by userspace, etc.) From Tom Gundersen.

  14) Automatic flow label generation on transmit in ipv6, from Tom
      Herbert.

  15) New packet timestamping facilities from Willem de Bruijn, meant to
      assist in measuring latencies going into/out-of the packet
      scheduler, latency from TCP data transmission to ACK, etc"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1536 commits)
  cxgb4 : Disable recursive mailbox commands when enabling vi
  net: reduce USB network driver config options.
  tg3: Modify tg3_tso_bug() to handle multiple TX rings
  amd-xgbe: Perform phy connect/disconnect at dev open/stop
  amd-xgbe: Use dma_set_mask_and_coherent to set DMA mask
  net: sun4i-emac: fix memory leak on bad packet
  sctp: fix possible seqlock seadlock in sctp_packet_transmit()
  Revert "net: phy: Set the driver when registering an MDIO bus device"
  cxgb4vf: Turn off SGE RX/TX Callback Timers and interrupts in PCI shutdown routine
  team: Simplify return path of team_newlink
  bridge: Update outdated comment on promiscuous mode
  net-timestamp: ACK timestamp for bytestreams
  net-timestamp: TCP timestamping
  net-timestamp: SCHED timestamp on entering packet scheduler
  net-timestamp: add key to disambiguate concurrent datagrams
  net-timestamp: move timestamp flags out of sk_flags
  net-timestamp: extend SCM_TIMESTAMPING ancillary data struct
  cxgb4i : Move stray CPL definitions to cxgb4 driver
  tcp: reduce spurious retransmits due to transient SACK reneging
  qlcnic: Initialize dcbnl_ops before register_netdev
  ...
2014-08-06 09:38:14 -07:00
Paul Moore 4fbe63d1c7 netlabel: shorter names for the NetLabel catmap funcs/structs
Historically the NetLabel LSM secattr catmap functions and data
structures have had very long names which makes a mess of the NetLabel
code and anyone who uses NetLabel.  This patch renames the catmap
functions and structures from "*_secattr_catmap_*" to just "*_catmap_*"
which improves things greatly.

There are no substantial code or logic changes in this patch.

Signed-off-by: Paul Moore <pmoore@redhat.com>
Tested-by: Casey Schaufler <casey@schaufler-ca.com>
2014-08-01 11:17:37 -04:00
Paul Moore d960a6184a netlabel: fix the catmap walking functions
The two NetLabel LSM secattr catmap walk functions didn't handle
certain edge conditions correctly, causing incorrect security labels
to be generated in some cases.  This patch corrects these problems and
converts the functions to use the new _netlbl_secattr_catmap_getnode()
function in order to reduce the amount of repeated code.

Cc: stable@vger.kernel.org
Signed-off-by: Paul Moore <pmoore@redhat.com>
Tested-by: Casey Schaufler <casey@schaufler-ca.com>
2014-08-01 11:17:29 -04:00
Paul Moore 4b8feff251 netlabel: fix the horribly broken catmap functions
The NetLabel secattr catmap functions, and the SELinux import/export
glue routines, were broken in many horrible ways and the SELinux glue
code fiddled with the NetLabel catmap structures in ways that we
probably shouldn't allow.  At some point this "worked", but that was
likely due to a bit of dumb luck and sub-par testing (both inflicted
by yours truly).  This patch corrects these problems by basically
gutting the code in favor of something less obtuse and restoring the
NetLabel abstractions in the SELinux catmap glue code.

Everything is working now, and if it decides to break itself in the
future this code will be much easier to debug than the code it
replaces.

One noteworthy side effect of the changes is that it is no longer
necessary to allocate a NetLabel catmap before calling one of the
NetLabel APIs to set a bit in the catmap.  NetLabel will automatically
allocate the catmap nodes when needed, resulting in less allocations
when the lowest bit is greater than 255 and less code in the LSMs.

Cc: stable@vger.kernel.org
Reported-by: Christian Evans <frodox@zoho.com>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Tested-by: Casey Schaufler <casey@schaufler-ca.com>
2014-08-01 11:17:17 -04:00
Paul Moore 41c3bd2039 netlabel: fix a problem when setting bits below the previously lowest bit
The NetLabel category (catmap) functions have a problem in that they
assume categories will be set in an increasing manner, e.g. the next
category set will always be larger than the last.  Unfortunately, this
is not a valid assumption and could result in problems when attempting
to set categories less than the startbit in the lowest catmap node.
In some cases kernel panics and other nasties can result.

This patch corrects the problem by checking for this and allocating a
new catmap node instance and placing it at the front of the list.

Cc: stable@vger.kernel.org
Reported-by: Christian Evans <frodox@zoho.com>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Tested-by: Casey Schaufler <casey@schaufler-ca.com>
2014-08-01 11:17:03 -04:00
Fabian Frederick 0947611d16 netlabel: remove unnecessary break after goto
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-07-15 16:27:00 -07:00
Jeff Kirsher d484ff154c netlabel: Fix FSF address in file headers
Several files refer to an old address for the Free Software Foundation
in the file header comment.  Resolve by replacing the address with
the URL <http://www.gnu.org/licenses/> so that we do not have to keep
updating the header comments anytime the address changes.

CC: Paul Moore <paul@paul-moore.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-12-06 12:37:56 -05:00
Johannes Berg c53ed74236 genetlink: only pass array to genl_register_family_with_ops()
As suggested by David Miller, make genl_register_family_with_ops()
a macro and pass only the array, evaluating ARRAY_SIZE() in the
macro, this is a little safer.

The openvswitch has some indirection, assing ops/n_ops directly in
that code. This might ultimately just assign the pointers in the
family initializations, saving the struct genl_family_and_ops and
code (once mcast groups are handled differently.)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-19 16:39:05 -05:00
Johannes Berg 4534de8305 genetlink: make all genl_ops users const
Now that genl_ops are no longer modified in place when
registering, they can be made const. This patch was done
mostly with spatch:

@@
identifier ops;
@@
+const
 struct genl_ops ops[] = {
 ...
 };

(except the struct thing in net/openvswitch/datapath.c)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-14 17:10:41 -05:00
Eric Dumazet 634fb979e8 inet: includes a sock_common in request_sock
TCP listener refactoring, part 5 :

We want to be able to insert request sockets (SYN_RECV) into main
ehash table instead of the per listener hash table to allow RCU
lookups and remove listener lock contention.

This patch includes the needed struct sock_common in front
of struct request_sock

This means there is no more inet6_request_sock IPv6 specific
structure.

Following inet_request_sock fields were renamed as they became
macros to reference fields from struct sock_common.
Prefix ir_ was chosen to avoid name collisions.

loc_port   -> ir_loc_port
loc_addr   -> ir_loc_addr
rmt_addr   -> ir_rmt_addr
rmt_port   -> ir_rmt_port
iif        -> ir_iif

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-10-10 00:08:07 -04:00
Paul Moore 6a8b7f0c85 netlabel: use domain based selectors when address based selectors are not available
NetLabel has the ability to selectively assign network security labels
to outbound traffic based on either the LSM's "domain" (different for
each LSM), the network destination, or a combination of both.  Depending
on the type of traffic, local or forwarded, and the type of traffic
selector, domain or address based, different hooks are used to label the
traffic; the goal being minimal overhead.

Unfortunately, there is a bug such that a system using NetLabel domain
based traffic selectors does not correctly label outbound local traffic
that is not assigned to a socket.  The issue is that in these cases
the associated NetLabel hook only looks at the address based selectors
and not the domain based selectors.  This patch corrects this by
checking both the domain and address based selectors so that the correct
labeling is applied, regardless of the configuration type.

In order to acomplish this fix, this patch also simplifies some of the
NetLabel domainhash structures to use a more common outbound traffic
mapping type: struct netlbl_dommap_def.  This simplifies some of the code
in this patch and paves the way for further simplifications in the
future.

Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-02 16:57:01 -07:00
Jiri Pirko 351638e7de net: pass info struct via netdevice notifier
So far, only net_device * could be passed along with netdevice notifier
event. This patch provides a possibility to pass custom structure
able to provide info that event listener needs to know.

Signed-off-by: Jiri Pirko <jiri@resnulli.us>

v2->v3: fix typo on simeth
	shortened dev_getter
	shortened notifier_info struct name
v1->v2: fix notifier_call parameter in call_netdevice_notifier()
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-28 13:11:01 -07:00
Paul Moore 6b21e1b77d netlabel: improve domain mapping validation
The net/netlabel/netlabel_domainhash.c:netlbl_domhsh_add() function
does not properly validate new domain hash entries resulting in
potential problems when an administrator attempts to add an invalid
entry.  One such problem, as reported by Vlad Halilov, is a kernel
BUG (found in netlabel_domainhash.c:netlbl_domhsh_audit_add()) when
adding an IPv6 outbound mapping with a CIPSO configuration.

This patch corrects this problem by adding the necessary validation
code to netlbl_domhsh_add() via the newly created
netlbl_domhsh_validate() function.

Ideally this patch should also be pushed to the currently active
-stable trees.

Reported-by: Vlad Halilov <vlad.halilov@gmail.com>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-05-19 14:49:55 -07:00
Paul Moore a6a8fe950e netlabel: fix build problems when CONFIG_IPV6=n
My last patch to solve a problem where the static/fallback labels were
not fully displayed resulted in build problems when IPv6 was disabled.
This patch resolves the IPv6 build problems; sorry for the screw-up.

Please queue for -stable or simply merge with the previous patch.

Reported-by: Kbuild Test Robot <fengguang.wu@intel.com>
Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-08 11:33:51 -05:00
Paul Moore 0c1233aba1 netlabel: correctly list all the static label mappings
When we have a large number of static label mappings that spill across
the netlink message boundary we fail to properly save our state in the
netlink_callback struct which causes us to repeat the same listings.
This patch fixes this problem by saving the state correctly between
calls to the NetLabel static label netlink "dumpit" routines.

Signed-off-by: Paul Moore <pmoore@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-03-07 16:20:23 -05:00
Linus Torvalds aecdc33e11 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next
Pull networking changes from David Miller:

 1) GRE now works over ipv6, from Dmitry Kozlov.

 2) Make SCTP more network namespace aware, from Eric Biederman.

 3) TEAM driver now works with non-ethernet devices, from Jiri Pirko.

 4) Make openvswitch network namespace aware, from Pravin B Shelar.

 5) IPV6 NAT implementation, from Patrick McHardy.

 6) Server side support for TCP Fast Open, from Jerry Chu and others.

 7) Packet BPF filter supports MOD and XOR, from Eric Dumazet and Daniel
    Borkmann.

 8) Increate the loopback default MTU to 64K, from Eric Dumazet.

 9) Use a per-task rather than per-socket page fragment allocator for
    outgoing networking traffic.  This benefits processes that have very
    many mostly idle sockets, which is quite common.

    From Eric Dumazet.

10) Use up to 32K for page fragment allocations, with fallbacks to
    smaller sizes when higher order page allocations fail.  Benefits are
    a) less segments for driver to process b) less calls to page
    allocator c) less waste of space.

    From Eric Dumazet.

11) Allow GRO to be used on GRE tunnels, from Eric Dumazet.

12) VXLAN device driver, one way to handle VLAN issues such as the
    limitation of 4096 VLAN IDs yet still have some level of isolation.
    From Stephen Hemminger.

13) As usual there is a large boatload of driver changes, with the scale
    perhaps tilted towards the wireless side this time around.

Fix up various fairly trivial conflicts, mostly caused by the user
namespace changes.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1012 commits)
  hyperv: Add buffer for extended info after the RNDIS response message.
  hyperv: Report actual status in receive completion packet
  hyperv: Remove extra allocated space for recv_pkt_list elements
  hyperv: Fix page buffer handling in rndis_filter_send_request()
  hyperv: Fix the missing return value in rndis_filter_set_packet_filter()
  hyperv: Fix the max_xfer_size in RNDIS initialization
  vxlan: put UDP socket in correct namespace
  vxlan: Depend on CONFIG_INET
  sfc: Fix the reported priorities of different filter types
  sfc: Remove EFX_FILTER_FLAG_RX_OVERRIDE_IP
  sfc: Fix loopback self-test with separate_tx_channels=1
  sfc: Fix MCDI structure field lookup
  sfc: Add parentheses around use of bitfield macro arguments
  sfc: Fix null function pointer in efx_sriov_channel_type
  vxlan: virtual extensible lan
  igmp: export symbol ip_mc_leave_group
  netlink: add attributes to fdb interface
  tg3: unconditionally select HWMON support when tg3 is enabled.
  Revert "net: ti cpsw ethernet: allow reading phy interface mode from DT"
  gre: fix sparse warning
  ...
2012-10-02 13:38:27 -07:00
Eric W. Biederman e1760bd5ff userns: Convert the audit loginuid to be a kuid
Always store audit loginuids in type kuid_t.

Print loginuids by converting them into uids in the appropriate user
namespace, and then printing the resulting uid.

Modify audit_get_loginuid to return a kuid_t.

Modify audit_set_loginuid to take a kuid_t.

Modify /proc/<pid>/loginuid on read to convert the loginuid into the
user namespace of the opener of the file.

Modify /proc/<pid>/loginud on write to convert the loginuid
rom the user namespace of the opener of the file.

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Cc: Paul Moore <paul@paul-moore.com> ?
Cc: David Miller <davem@davemloft.net>
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
2012-09-17 18:08:54 -07:00
Eric W. Biederman 15e473046c netlink: Rename pid to portid to avoid confusion
It is a frequent mistake to confuse the netlink port identifier with a
process identifier.  Try to reduce this confusion by renaming fields
that hold port identifiers portid instead of pid.

I have carefully avoided changing the structures exported to
userspace to avoid changing the userspace API.

I have successfully built an allyesconfig kernel with this change.

Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-09-10 15:30:41 -04:00
Dan Carpenter 64b5fad526 netlabel: use GFP flags from caller instead of GFP_ATOMIC
This function takes a GFP flags as a parameter, but they are never used.
We don't take a lock in this function so there is no reason to prefer
GFP_ATOMIC over the caller's GFP flags.

There is only one caller, cipso_v4_map_cat_rng_ntoh(), and it passes
GFP_ATOMIC as the GFP flags so this doesn't change how the code works.
It's just a cleanup.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-22 19:29:57 -04:00
Eric Dumazet cf778b00e9 net: reintroduce missing rcu_assign_pointer() calls
commit a9b3cd7f32 (rcu: convert uses of rcu_assign_pointer(x, NULL) to
RCU_INIT_POINTER) did a lot of incorrect changes, since it did a
complete conversion of rcu_assign_pointer(x, y) to RCU_INIT_POINTER(x,
y).

We miss needed barriers, even on x86, when y is not NULL.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
CC: Stephen Hemminger <shemminger@vyatta.com>
CC: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-12 12:26:56 -08:00
Eric Dumazet dfd56b8b38 net: use IS_ENABLED(CONFIG_IPV6)
Instead of testing defined(CONFIG_IPV6) || defined(CONFIG_IPV6_MODULE)

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-12-11 18:25:16 -05:00
David S. Miller b3613118eb Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2011-12-02 13:49:21 -05:00