Subsystem:
- Add new ioctl to get and set extra RTC parameters, this includes backup
switch mode
- Expose available features to userspace, in particular, when alarmas have a
resolution of one minute instead of a second.
- Let the core handle those alarms with a minute resolution
New driver:
- MSTAR MSC313 RTC
Drivers:
- Add SPI ID table where necessary
- Add BSM support for rv3028, rv3032 and pcf8523
- s3c: set RTC range
- rx8025: set range, implement .set_offset and .read_offset
-----BEGIN PGP SIGNATURE-----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=pTlj
-----END PGP SIGNATURE-----
Merge tag 'rtc-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"This includes new ioctls to get and set parameters and in particular
the backup switch mode that is needed for some RTCs to actually enable
the backup voltage (and have a useful RTC).
The same interface can also be used to get the actual features
supported by the RTC so userspace has a better way than trying and
failing.
Summary:
Subsystem:
- Add new ioctl to get and set extra RTC parameters, this includes
backup switch mode
- Expose available features to userspace, in particular, when alarmas
have a resolution of one minute instead of a second.
- Let the core handle those alarms with a minute resolution
New driver:
- MSTAR MSC313 RTC
Drivers:
- Add SPI ID table where necessary
- Add BSM support for rv3028, rv3032 and pcf8523
- s3c: set RTC range
- rx8025: set range, implement .set_offset and .read_offset"
* tag 'rtc-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (50 commits)
rtc: rx8025: use .set_offset/.read_offset
rtc: rx8025: use rtc_add_group
rtc: rx8025: clear RTC_FEATURE_ALARM when alarm are not supported
rtc: rx8025: set range
rtc: rx8025: let the core handle the alarm resolution
rtc: rx8025: switch to devm_rtc_allocate_device
rtc: ab8500: let the core handle the alarm resolution
rtc: ab-eoz9: support UIE when available
rtc: ab-eoz9: use RTC_FEATURE_UPDATE_INTERRUPT
rtc: rv3032: let the core handle the alarm resolution
rtc: s35390a: let the core handle the alarm resolution
rtc: handle alarms with a minute resolution
rtc: pcf85063: silence cppcheck warning
rtc: rv8803: fix writing back ctrl in flag register
rtc: s3c: Add time range
rtc: s3c: Extract read/write IO into separate functions
rtc: s3c: Remove usage of devm_rtc_device_register()
rtc: tps80031: Remove driver
rtc: sun6i: Allow probing without an early clock provider
rtc: pcf8523: add BSM support
...
The driver has its own sysfs file to adjust the clock. Fortunately, it is
already in pbb, however, the sign it expects is the opposite of what the
RTC core does (which actually aligns with the RTC).
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211107225458.111068-12-alexandre.belloni@bootlin.com
Tell the RTC core UIE are not supported because the resolution of the alarm
is a minute.
Note that this is in fact also fixing how the resolution is reported as the
previous test was simply ensuring the alarm was more than a minute in the
future while the register has a minute resolution.
This would be ok if the alarm was a countdown but ab8500_rtc_read_alarm
suggests otherwise and the AB8500 datasheet states that the RTC
documentation is not public.
Finally, the comment is wrong and what makes the UIE emulation work is
uie_unsupported being set.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20211107225458.111068-6-alexandre.belloni@bootlin.com
Handle alarms with a minute resolution in the core. Until now drivers have
been open coding the seconds part removal and have been doing that wrongly.
Most of them are rounding up which means the allow the system to miss
deadlines. So, round down and let __rtc_set_alarm return immediately if the
time has already passed.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211107225458.111068-1-alexandre.belloni@bootlin.com
ctrl is set from read_regs(..FLAG, 2, ctrl), so ctrl[0] is FLAG
and ctrl[1] is the CTRL register.
Use ctrl[0] to write back to the FLAG register as appropriate.
Signed-off-by: Dominique Martinet <dominique.martinet@atmark-techno.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211101013400.325855-1-dominique.martinet@atmark-techno.com
1. Convert Exynos ChipID and ASV driver to a module and make it a
default, instead of selected. The driver is not essential, so it
could be disabled, if needed.
2. Add support for Exynos850 and Exynos Auto v9 to Exynos ChipID and ASV
driver.
3. Get rid of HAVE_S3C_RTC because it was adding just another layer
instead of direct dependencies.
4. Minor cleanups.
-----BEGIN PGP SIGNATURE-----
iQJEBAABCgAuFiEE3dJiKD0RGyM7briowTdm5oaLg9cFAmF3zFcQHGtyemtAa2Vy
bmVsLm9yZwAKCRDBN2bmhouD1wXED/9VSIwfegbhUkfa9yCetdt8dDrjINAUuZ89
FZsplj7BdFJVra7KxjZ6WSWqT5bBVF804mPQKi/filUvuZLr8oOVc/BCdARPMqxq
3rui2xiXvUgDWfJmqFEaVhTTChKAK2NKMgC+aGB0Ah3PK9QbO9fG+E1IcOBLIEUQ
bQH77+GH4rG8/INWdrqmL7LrJUkOyUsCgK3IxGh08m6nRgn8Xfwk1Y0UPpeGgQTs
66CnmIgBiN3+w0MeFClHpLXokBnSSFwrtITrwLILffAO18EEFaaErSZhSyge4tdu
WwH9no+mcp8gpV7mU/b4rAhNVqn6LIldGrk3O6H9Pm9RJj1ITsLYdTXEpUKErXma
g3ZloSyQ/zMUAM3K6rMHYg92Z8pUTnbkbYI6hoCgPGmrHIIRIhIjbjafBHuFZuhL
aeLUCcPxGv3tETjmDaSscHDJ+kVtCyArAoggDbPzWr8V7IO8OmMecxTfYJEKPelM
CH0uvIBHgXRtSF091XbrJ8vXy/GZSWZJH5CrQmeY/HqE+iJFAYXGj53fohGlOu7m
t0OsCnnX/eaCRFPtg6yUfGbiJ3xjdyTvA6ffn7c4Eel4tezy3HnGIaIjA/QI2KVa
J18YWZDMGxeQpofuTo8wpCZiUZo/6zlVb3zh9vyRvf1gR06Ln8y5Kb+SAna+EvTj
YDxiCGYwIg==
=ZJb8
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=y2Ab
-----END PGP SIGNATURE-----
Merge tag 'samsung-drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/drivers
Samsung SoC drivers changes for v5.16
1. Convert Exynos ChipID and ASV driver to a module and make it a
default, instead of selected. The driver is not essential, so it
could be disabled, if needed.
2. Add support for Exynos850 and Exynos Auto v9 to Exynos ChipID and ASV
driver.
3. Get rid of HAVE_S3C_RTC because it was adding just another layer
instead of direct dependencies.
4. Minor cleanups.
* tag 'samsung-drivers-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
soc: samsung: exynos-chipid: add exynosautov9 SoC support
rtc: s3c: remove HAVE_S3C_RTC in favor of direct dependencies
soc: samsung: exynos-chipid: Add Exynos850 support
dt-bindings: samsung: exynos-chipid: Document Exynos850 compatible
soc: samsung: exynos-chipid: Pass revision reg offsets
soc: samsung: pm_domains: drop unused is_off field
arm64: exynos: don't have ARCH_EXYNOS select EXYNOS_CHIPID
soc: samsung: exynos-chipid: do not enforce built-in
soc: samsung: exynos-chipid: convert to a module
soc: samsung: exynos-chipid: avoid soc_device_to_device()
soc: samsung: exynos-pmu: Fix compilation when nothing selects CONFIG_MFD_CORE
Link: https://lore.kernel.org/r/20211026094709.75692-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This RTC driver starts counting from 2000 to avoid Y2K problem. Also it
only supports 100 years range for all RTCs. Provide that info to RTC
framework. Also remove check for 100 years range in s3c_rtc_settime(),
as RTC core won't pass any invalid values to the driver, now that
correct range is set.
Here is the rationale on 100 years range limitation. Info on different
Samsung RTCs (credit goes to Krzysztof Kozlowski):
- All S3C chips have only 8-bit wide year register (can store 100
years range in BCD format)
- S5Pv210 and Exynos chips have 12-bit year register (can store 1000
years range in BCD format)
But in reality we usually can't make use of those 12 bits either:
- RTCs might think that both 2000 and 2100 years are leap years. So
when the YEAR register is 0, RTC goes from 28 Feb to 29 Feb, and
when the YEAR register is 100, RTC also goes from 28 Feb to 29 Feb.
This is of course incorrect: RTC breaks leap year criteria, which
breaks the time contiguity, which leads to inability to use the RTC
after year of 2099. It was found for example on Exynos850 SoC.
- Despite having 12 bits for holding the year value, RTC might
overflow the year value internally much earlier. For example, on
Exynos850 the RTC overflows when YEAR=159, making the next YEAR=0.
This way RTC actually has range of 160 years, not 1000 as one may
think.
All that said, there is no sense in trying to increase the time range
for more than 100 years on RTCs that seem capable of that. It also
doesn't have too much practical value -- current hardware will be
probably obsolete by 2100.
Tested manually on Exynos850 RTC:
$ date -s "1999-12-31 23:59:50"
$ hwclock -w -f /dev/rtc0
$ date -s "2100-01-01 00:00:00"
$ hwclock -w -f /dev/rtc0
$ date -s "2000-01-01 00:00:00"
$ hwclock -w -f /dev/rtc0
$ hwclock -r -f /dev/rtc0
$ date -s "2099-12-31 23:59:50"
$ hwclock -w -f /dev/rtc0
$ hwclock -r -f /dev/rtc0
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211021202256.28517-4-semen.protsenko@linaro.org
Create dedicated functions for I/O operations and BCD conversion. It can
be useful to separate those from representation conversion and other
stuff found in RTC callbacks.
This patch does not introduce any functional changes, it's merely
refactoring change.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211021202256.28517-3-semen.protsenko@linaro.org
devm_rtc_device_register() is deprecated. Use devm_rtc_allocate_device()
and devm_rtc_register_device() API instead. This change doesn't change
the behavior, but allows for further improvements.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211021202256.28517-2-semen.protsenko@linaro.org
Some SoCs have an RTC supported by this RTC driver, but do not have an
early clock provider declared here. Currently, this prevents the RTC
driver from probing, because it expects a global struct to already be
allocated. Fix probing the driver by copying the missing pieces from the
clock provider setup function, replacing them with the devm variants.
Signed-off-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210928080335.36706-7-samuel@sholland.org
Backup Switch Mode allows to select the strategy to use to switch from the
main power supply to the backup power supply. As before, the driver will
switch from standby mode to level mode but now only when it has never been
set.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211018153651.82069-5-alexandre.belloni@bootlin.com
Compiling out pcf8523_rtc_ioctl saves about 5% of the generated machine
code. However, it certainly never happens as the RTC character device
interface is the most useful one and is probably always compiled in.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211018153651.82069-2-alexandre.belloni@bootlin.com
Use regmap to access the RTC registers, this is a huge reduction in code
lines and generated code. Values on ARMv7:
text data bss dec hex
5180 132 0 5312 14c0 before
3900 132 0 4032 fc0 after
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211018153651.82069-1-alexandre.belloni@bootlin.com
BLF, battery low doesn't mean the time is imprecise or invalid, it simply mean
the backup battery has to be replaced. This information can be read using the
VL_READ ioctl.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211015192400.818254-1-alexandre.belloni@bootlin.com
Backup Switch Mode is currently set properly when the trickle charger is
enabled. However, in the case of a non-rechargeable battery, it is
necessary to be able to enable it, only allow that when the trickle charger
is disabled.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211018151933.76865-8-alexandre.belloni@bootlin.com
Backup Switch Mode controls how the RTC decides when to switch to the
backup power supply. As it is disabled by default, provide a way to enable
and configure it.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211018151933.76865-7-alexandre.belloni@bootlin.com
BSM or Backup Switch Mode is a common feature on RTCs, allowing to select
how the RTC will decide when to switch from its primary power supply to the
backup power supply. It is necessary to be able to set it from userspace as
there are uses cases where it has to be done dynamically.
Supported values are:
RTC_BSM_DISABLED: disabled
RTC_BSM_DIRECT: switching will happen as soon as Vbackup > Vdd
RTC_BSM_LEVEL: switching will happen around a threshold, usually with an
hysteresis
RTC_BSM_STANDBY: switching will not happen until Vdd > Vbackup, this is
useful to ensure the RTC doesn't draw any power until the device is first
powered on.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211018151933.76865-6-alexandre.belloni@bootlin.com
Add a new feature for RTCs able to correct the oscillator imprecision. This
is also called offset or trimming. Such drivers have a .set_offset callback,
use that to set the feature bit from the core.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211018151933.76865-4-alexandre.belloni@bootlin.com
The config HAVE_S3C_RTC is not really needed since we can simply just
add the dependencies directly to RTC_DRV_S3C. Also, one less config to
keep track of!
Signed-off-by: Will McVicker <willmcvicker@google.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211013212256.3425889-1-willmcvicker@google.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Power-on reset after the insertion of a battery does not always complete
successfully, leading to corrupted register content. The EXT_TEST bit
will stop the clock from running, but currently the driver will never
recover.
Safely handle the erroneous state by clearing EXT_TEST as part of the
usual set_time method.
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211015111208.1757110-1-phil@raspberrypi.com
TQ-Systems' TQMa8Mx module (SoM) uses a pcf85063 as RTC. The default output
is 32768Hz. This is to provide the i.MX8M CKIL clock. Once the RTC driver
is probed, the clock is disabled and all i.MX8M functionality depending on
the 32 KHz clock will halt. In our case the whole system halts and a power
cycle is required.
Referencing the pcf85063 directly results in a deadlock. The kernel
will see, that i.MX8M system clock needs the RTC clock and do probe
deferral. But the i.MX8M I2C module never becomes usable without the
i.MX8M CKIL clock and thus the RTC's clock will not be probed. So
from the kernel's perspective this is a chicken-and-egg problem.
Technically everything is fine by not touching anything, since
the RTC clock correctly enables the clock on reset (i.e. on
battery backup power loss).
A workaround for this issue is describing the square wave pin
as fixed-clock, which is registered early and basically how
this pin is used on the i.MX8M.
This addresses the exact same issue as in commit f765e349c3 ("rtc:
m41t80: add support for fixed clock").
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
[Fixed return value 0 -> NULL]
Link: https://lore.kernel.org/r/20211013074954.997445-1-alexander.stein@ew.tq-group.com
Do not call rv3032_exit_eerd() if the enter function fails but don't
forget to call the exit when the enter succeeds.
Fixes: 2eeaa532ac ("rtc: rv3032: Add a driver for Microcrystal RV-3032")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211012101028.GT2083@kadam
I got a null-ptr-deref report when doing fault injection test:
BUG: kernel NULL pointer dereference, address: 0000000000000000
RIP: 0010:strcmp+0xc/0x20
Call Trace:
__devm_rtc_register_device.cold.7+0x16a/0x2df
rv3029_probe+0x4b1/0x770 [rtc_rv3029c2]
rv3029_i2c_probe+0x141/0x180 [rtc_rv3029c2]
i2c_device_probe+0xa07/0xbb0
really_probe+0x285/0xc30
If dev_set_name() fails, dev_name() is null, it causes null-ptr-deref,
we need check the return value of dev_set_name().
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211012041629.2504158-1-yangyingliang@huawei.com
I got a null-ptr-deref report when doing fault injection test:
general protection fault, probably for non-canonical address 0xdffffc0000000022: 0000 [#1] SMP KASAN PTI
KASAN: null-ptr-deref in range [0x0000000000000110-0x0000000000000117]
RIP: 0010:device_del+0x132/0xdc0
Call Trace:
cdev_device_del+0x1a/0x80
devm_rtc_unregister_device+0x37/0x80
release_nodes+0xc3/0x3b0
If cdev_device_add() fails, 'dev->p' is not set, it causes
null-ptr-deref when calling cdev_device_del(). Registering
character device is optional, we don't return error code
here, so introduce a new flag 'RTC_NO_CDEV' to indicate
if it has character device, cdev_device_del() is called
when this bit is not set.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20211011132114.3663509-1-yangyingliang@huawei.com
Function m41t80_sqw_register_clk returns a pointer to struct clk,
so returning a plain 0 integer isn't good practice. Fix this by
returning a NULL instead.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210925223441.182673-1-colin.king@canonical.com
Shifting the u16 value returned by readw by 16 bits to the left
will be promoted to a 32 bit signed int and then sign-extended
to an unsigned long. If the top bit of the readw is set then
the shifted value will be sign extended and the top 32 bits of
the result will be set.
Fixes: be7d9c9161 ("rtc: Add support for the MSTAR MSC313 RTC")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210928134654.991923-1-colin.king@canonical.com
Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding an id_table listing the
SPI IDs for everything.
Fixes: 96c8395e21 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210927130240.33693-1-broonie@kernel.org
This adds support for the RTC block on the Mstar MSC313e SoCs and newer.
Signed-off-by: Daniel Palmer <daniel@0x0f.com>
Co-developed-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Reviewed-by: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210823171613.18941-3-romain.perier@gmail.com
The MODULE_DEVICE_TABLE already creates proper alias for platform
driver. Having another MODULE_ALIAS causes the alias to be duplicated.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210916164604.134924-1-krzysztof.kozlowski@canonical.com
The MODULE_DEVICE_TABLE already creates proper alias for platform
driver. Having another MODULE_ALIAS causes the alias to be duplicated.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210916164513.134725-1-krzysztof.kozlowski@canonical.com
Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding an id_table listing the
SPI IDs for everything.
Fixes: 96c8395e21 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210923194922.53386-4-broonie@kernel.org
Currently autoloading for SPI devices does not use the DT ID table, it uses
SPI modalises. Supporting OF modalises is going to be difficult if not
impractical, an attempt was made but has been reverted, so ensure that
module autoloading works for this driver by adding an id_table listing the
SPI IDs for everything.
Fixes: 96c8395e21 ("spi: Revert modalias changes")
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210923194922.53386-3-broonie@kernel.org
Linus Torvalds
Alexandre Belloni
Dominique Martinet
Arnd Bergmann
Sam Protsenko
Dmitry Osipenko
Samuel Holland
Will McVicker
Phil Elwell
Alexander Stein
Dan Carpenter
Yang Yingliang
Colin Ian King
Mark Brown
Daniel Palmer
Wolfram Sang
Krzysztof Kozlowski