The repipe argument is only used by perf inject and the all others
passes 'false'. Let's remove it from the function signature and add
__perf_session__new() to be called from perf inject directly.
This is a preparation of the change the pipe input/output.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210719223153.1618812-2-namhyung@kernel.org
[ Fixed up some trivial conflicts as this patchset fell thru the cracks ;-( ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Current code:
for (j = 0; j < argc; j++, i++)
rec_argv[i] = argv[j];
if (verbose > 0) {
pr_debug("calling: record ");
while (rec_argv[j]) {
pr_debug("%s ", rec_argv[j]);
j++;
}
pr_debug("\n");
}
The entries of argv[] are copied to the end of rec_argv[], not
copied to the beginning of rec_argv[]. So the index j at
rec_argv[] doesn't point to the first event.
Now we record the start index and end index for events in rec_argv[],
and print them if verbose is enabled.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210527001610.10553-7-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support 'perf mem record' for hybrid platform. On hybrid platform,
such as Alderlake, when executing 'perf mem record', it actually calls:
record -e {cpu_core/mem-loads-aux/,cpu_core/mem-loads,ldlat=30/}:P
-e cpu_atom/mem-loads,ldlat=30/P
-e cpu_core/mem-stores/P
-e cpu_atom/mem-stores/P
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210527001610.10553-6-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The perf_mem_events__name() can generate the mem-load event name.
It uses a variable 'mem_loads_name__init' to avoid generating the
event name every time (because perf_pmu__scan takes some time).
The perf_mem_events__name() assumes the pmu is "cpu" but it's not
correct for hybrid platform. For Alderlake, the pmu is "cpu_core" or
"cpu_atom"
Introduce a new parameter 'pmu_name' in perf_mem_events__name
to let the caller specify a pmu name.
Considering such event name is x86 specific, so move
perf_mem_events[] to arch/x86/util/mem-events.c.
We still keep the variable 'mem_loads_name__init' but it's only
used when pmu_name is NULL (compatible for original behavior). When
pmu_name is not NULL (e.g. "cpu_core"), this patch doesn't have
optimization. That can be implemented in follow up patch.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20210527001610.10553-3-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Two new data source fields, to indicate the block reasons of a load
instruction, are introduced on the Intel Sapphire Rapids server. The
fields can be used by the memory profiling.
Add a new sort function, SORT_MEM_BLOCKED, for the two fields.
For the previous platforms or the block reason is unknown, print "N/A"
for the block reason.
Add blocked as a default mem sort key for perf report and perf mem
report.
Committer testing:
So in machines without this capability we get a "N/A" filling the new "Blocked"
column:
$ perf mem record ls
arch certs CREDITS Documentation include ipc Kconfig lib MAINTAINERS mm samples security usr block
COPYING crypto drivers fs init Kbuild kernel LICENSES Makefile net README scripts sound tools
virt
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.008 MB perf.data (17 samples) ]
$
$ perf mem report --stdio
# To display the perf.data header info, please use --header/--header-only options.
#
# Total Lost Samples: 0
#
# Samples: 6 of event 'cpu/mem-loads,ldlat=30/Pu'
# Total weight : 1381
# Sort order : local_weight,mem,sym,dso,symbol_daddr,dso_daddr,snoop,tlb,locked,blocked
#
# Overhead Samples Local Weight Memory access Symbol Shared Object Data Symbol Data Object Snoop TLB access Locked Blocked
# ........ ....... ............ .................... ....................... ............. ...................... ............ ..... ............ ...... .......
#
32.87% 1 454 Local RAM or RAM hit [.] _dl_relocate_object ld-2.31.so [.] 0x00007fe91cef3078 libc-2.31.so Hit L1 or L2 hit No N/A
25.56% 1 353 LFB or LFB hit [.] strcmp ld-2.31.so [.] 0x00005586973855ca ls None L1 or L2 hit No N/A
22.59% 1 312 LFB or LFB hit [.] _dl_cache_libcmp ld-2.31.so [.] 0x00007fe91d0e3b18 ld.so.cache None L1 or L2 hit No N/A
8.47% 1 117 LFB or LFB hit [.] _dl_relocate_object ld-2.31.so [.] 0x00007fe91ceee570 libc-2.31.so None L1 or L2 hit No N/A
6.88% 1 95 LFB or LFB hit [.] _dl_relocate_object ld-2.31.so [.] 0x00007fe91ceed490 libc-2.31.so None L1 or L2 hit No N/A
3.62% 1 50 LFB or LFB hit [.] _dl_cache_libcmp ld-2.31.so [.] 0x00007fe91d0ebe60 ld.so.cache None L1 or L2 hit No N/A
# Samples: 11 of event 'cpu/mem-stores/Pu'
# Total weight : 11
# Sort order : local_weight,mem,sym,dso,symbol_daddr,dso_daddr,snoop,tlb,locked,blocked
#
# Overhead Samples Local Weight Memory access Symbol Shared Object Data Symbol Data Object Snoop TLB access Locked Blocked
# ........ ....... ............ ............. ....................... ............. ...................... ........... ..... .......... ...... .......
#
9.09% 1 0 L1 hit [.] __strcoll_l libc-2.31.so [.] 0x00007fffe5648fc8 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] _dl_lookup_symbol_x ld-2.31.so [.] 0x00007fffe56490b8 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] _dl_name_match_p ld-2.31.so [.] 0x00007fffe56487d8 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] _dl_start ld-2.31.so [.] start_time+0x0 ld-2.31.so N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] _dl_sysdep_start ld-2.31.so [.] 0x00007fffe56494b8 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] do_lookup_x ld-2.31.so [.] 0x00007fffe5648ff8 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] do_lookup_x ld-2.31.so [.] 0x00007fffe5649064 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 hit [.] do_lookup_x ld-2.31.so [.] 0x00007fffe5649130 [stack] N/A N/A N/A N/A
9.09% 1 0 L1 miss [.] _dl_start ld-2.31.so [.] _rtld_global+0xaf8 ld-2.31.so N/A N/A N/A N/A
9.09% 1 0 L1 miss [.] _dl_start ld-2.31.so [.] _rtld_global+0xc28 ld-2.31.so N/A N/A N/A N/A
9.09% 1 0 L1 miss [.] _dl_start ld-2.31.so [.] 0x00007fffe56495b8 [stack] N/A N/A N/A N/A
# (Tip: Show user configuration overrides: perf config --user --list)
$
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/1612296553-21962-4-git-send-email-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now, "--phys-data" is the only option which impacts the output format.
A simple "if else" is enough to handle the option. But there will be
more options added, e.g. "--data-page-size", which also impact the
output format. The code will become too complex to be maintained.
Divide the big printf into several small pieces. Output the specific
piece only if the related option is applied.
No functional change.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210105195752.43489-2-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now, "--phys-data" is the only option which impacts the sort order. A
simple "if else" is enough to handle the option. But there will be more
options added, e.g. "--data-page-size", which also impact the sort
order. The code will become too complex to be maintained.
Divide the sort order string into several small pieces. The first piece
is always the default sort string for LOAD/STORE. Appends the specific
sort string if related option is applied.
No functional change.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Stephane Eranian <eranian@google.com>
Cc: Will Deacon <will@kernel.org>
Link: http://lore.kernel.org/lkml/20201216185805.9981-4-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'perf mem' tool doesn't support AUX trace data so it cannot receive
the hardware tracing data.
On arm64, although it doesn't support PMU events for memory load and
store, ARM SPE is a good candidate for memory profiling, the hardware
tracer can record memory accessing operations with affiliated
information (e.g. physical address and virtual address for accessing,
cache levels, TLB walking, latency, etc).
To allow "perf mem" tool to support AUX trace, this patch adds the AUX
callbacks for session structure; make itrace memory event as default for
"perf mem", this tells the AUX trace decoder to synthesize memory
samples.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20201106094853.21082-8-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It's needless to initialize memory events for reporting, this patch
moves memory event initialization for only recording. Furthermore,
the change allows to parse perf data on cross platforms, e.g. perf
tool can report result properly even the machine doesn't support
the memory events.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20201106094853.21082-6-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
On the architectures with perf memory profiling, two types of hardware
events have been supported: load and store; if want to profile memory
for both load and store operations, the tool will use these two events
at the same time, the usage is:
# perf mem record -t load,store -- uname
But this cannot be applied for AUX tracing event, the same PMU event can
be used to only trace memory load, or only memory store, or trace for
both memory load and store.
This patch introduces a new event PERF_MEM_EVENTS__LOAD_STORE, which is
used to support the event which can record both memory load and store
operations.
When user specifies memory operation type as 'load,store', or doesn't
set type so use 'load,store' as default, if the arch supports the event
PERF_MEM_EVENTS__LOAD_STORE, the tool will convert the required
operations to this single event; otherwise, if the arch doesn't support
PERF_MEM_EVENTS__LOAD_STORE, the tool rolls back to enable both events
PERF_MEM_EVENTS__LOAD and PERF_MEM_EVENTS__STORE, which keeps the same
behaviour with before.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20201106094853.21082-4-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Different architectures might use different event or different event
parameters for memory profiling, this patch introduces a weak
perf_mem_events__ptr() function which allows to return back a
architecture specific memory event.
Since the variable 'perf_mem_events' can be only accessed by the
perf_mem_events__ptr() function, mark the variable as 'static', this
allows the architectures to define its own memory event array.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Link: https://lore.kernel.org/r/20201106094853.21082-3-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When the event is passed as list, the default events should be listed as
per 'perf mem record -e list'. Previous behavior is:
$ perf c2c record -e list
failed: event 'list' not found, use '-e list' to get list of available events
Usage: perf c2c record [<options>] [<command>]
or: perf c2c record [<options>] -- <command> [<options>]
-e, --event <event> event selector. Use 'perf mem record -e list' to list available events
$
New behavior:
$ perf c2c record -e list
ldlat-loads : available
ldlat-stores : available
v3: is a rebase.
v2: addresses review comments by Jiri Olsa.
https://lore.kernel.org/lkml/20191127081844.GH32367@krava/
Signed-off-by: Ian Rogers <irogers@google.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20200507220604.3391-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch is to return error code of perf_new_session function on
failure instead of NULL.
Test Results:
Before Fix:
$ perf c2c report -input
failed to open nput: No such file or directory
$ echo $?
0
$
After Fix:
$ perf c2c report -input
failed to open nput: No such file or directory
$ echo $?
254
$
Committer notes:
Fix 'perf tests topology' case, where we use that TEST_ASSERT_VAL(...,
session), i.e. we need to pass zero in case of failure, which was the
case before when NULL was returned by perf_session__new() for failure,
but now we need to negate the result of IS_ERR(session) to respect that
TEST_ASSERT_VAL) expectation of zero meaning failure.
Reported-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com>
Signed-off-by: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Nageswara R Sastry <rnsastry@linux.vnet.ibm.com>
Acked-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Reviewed-by: Mukesh Ojha <mojha@codeaurora.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Jeremie Galarneau <jeremie.galarneau@efficios.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Shawn Landden <shawn@git.icu>
Cc: Song Liu <songliubraving@fb.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tzvetomir Stoyanov <tstoyanov@vmware.com>
Link: http://lore.kernel.org/lkml/20190822071223.17892.45782.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The mem_info struct goes to mem-events.h and branch_info goes to
branch.h, where they belong, this way we can remove several headers from
symbols.h and trim the include dependency tree more.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-aupw71xnravcsu2xoabfmhpc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
So that we can reduce the header dependency tree further, in the process
noticed that lots of places were getting even things like build-id
routines and 'struct perf_tool' definition indirectly, so fix all those
too.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-ti0btma9ow5ndrytyoqdk62j@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename struct perf_evsel to struct evsel, so we don't have a name clash
when we add struct perf_evsel in libperf.
Committer notes:
Added fixes for arm64, provided by Jiri.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20190721112506.12306-5-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a 'path' member to 'struct perf_data'. It will keep the configured
path for the data (const char *). The path in struct perf_data_file is
now dynamically allocated (duped) from it.
This scheme is useful/used in following patches where struct
perf_data::path holds the 'configure' directory path and struct
perf_data_file::path holds the allocated path for specific files.
Also it actually makes the code little simpler.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20190221094145.9151-3-jolsa@kernel.org
[ Fixup data-convert-bt.c missing conversion ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Lots of places get the map.h file indirectly, and since we're going to
remove it from machine.h, then those need to include it directly, do it
now, before we remove that dep.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lkml.kernel.org/n/tip-ob8jehdjda8h5jsrv9dqj9tf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For perf mem report / perf mem record, pass all unknown options
through to the underlying report/record commands. This makes things
like
perf mem record -a sleep 1
work. Matches how c2c and other tools work.
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: http://lkml.kernel.org/r/20180406203812.3087-2-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add struct perf_data_file to represent a single file within a perf_data
struct.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-c3f9p4xzykr845ktqcek6p4t@git.kernel.org
[ Fixup recent changes in 'perf script --per-event-dump' ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Rename struct perf_data_file to perf_data, because we will add the
possibility to have multiple files under perf.data, so the 'perf_data'
name fits better.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Changbin Du <changbin.du@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-39wn4d77phel3dgkzo3lyan0@git.kernel.org
[ Fixup recent changes in 'perf script --per-event-dump' ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Let's free the allocated rec_argv in case we return early, in order to
avoid leaking memory.
This adds free() at a few very similar places across the tree where it
was missing.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Martin kepplinger <martink@posteo.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170913191419.29806-1-martink@posteo.de
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add option phys-data in "perf mem" to record/report physical address.
The default mem sort order for physical address is changed accordingly.
Signed-off-by: Kan Liang <kan.liang@intel.com>
Tested-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1504026672-7304-4-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Needed to use the PRI[xu](32,64) formatting macros.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-wkbho8kaw24q67dd11q0j39f@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
We got it from the git sources but never used it for anything, with the
place where this would be somehow used remaining:
static int run_builtin(struct cmd_struct *p, int argc, const char **argv)
{
prefix = NULL;
if (p->option & RUN_SETUP)
prefix = NULL; /* setup_perf_directory(); */
Ditch it.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-uw5swz05vol0qpr32c5lpvus@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Introduce a new option to record PERF_RECORD_NAMESPACES events emitted
by the kernel when fork, clone, setns or unshare are invoked. And update
perf-record documentation with the new option to record namespace
events.
Committer notes:
Combined it with a later patch to allow printing it via 'perf report -D'
and be able to test the feature introduced in this patch. Had to move
here also perf_ns__name(), that was introduced in another later patch.
Also used PRIu64 and PRIx64 to fix the build in some enfironments wrt:
util/event.c:1129:39: error: format '%lx' expects argument of type 'long unsigned int', but argument 6 has type 'long long unsigned int' [-Werror=format=]
ret += fprintf(fp, "%u/%s: %lu/0x%lx%s", idx
^
Testing it:
# perf record --namespaces -a
^C[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.083 MB perf.data (423 samples) ]
#
# perf report -D
<SNIP>
3 2028902078892 0x115140 [0xa0]: PERF_RECORD_NAMESPACES 14783/14783 - nr_namespaces: 7
[0/net: 3/0xf0000081, 1/uts: 3/0xeffffffe, 2/ipc: 3/0xefffffff, 3/pid: 3/0xeffffffc,
4/user: 3/0xeffffffd, 5/mnt: 3/0xf0000000, 6/cgroup: 3/0xeffffffb]
0x1151e0 [0x30]: event: 9
.
. ... raw event: size 48 bytes
. 0000: 09 00 00 00 02 00 30 00 c4 71 82 68 0c 7f 00 00 ......0..q.h....
. 0010: a9 39 00 00 a9 39 00 00 94 28 fe 63 d8 01 00 00 .9...9...(.c....
. 0020: 03 00 00 00 00 00 00 00 ce c4 02 00 00 00 00 00 ................
<SNIP>
NAMESPACES events: 1
<SNIP>
#
Signed-off-by: Hari Bathini <hbathini@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@fb.com>
Cc: Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com>
Cc: Aravinda Prasad <aravinda@linux.vnet.ibm.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sargun Dhillon <sargun@sargun.me>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/148891930386.25309.18412039920746995488.stgit@hbathini.in.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It now can have negative value to suppress the message entirely. So it
needs to check it being positive.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170217081742.17417-3-namhyung@kernel.org
[ Adjust fuzz on tools/perf/util/pmu.c, add > 0 checks in many other places ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Michael reported 'perf mem -t store record' being broken. The reason is
latest rework of this area:
commit acbe613e0c ("perf tools: Add monitored events array")
We don't mark perf_mem_events store record when -t store option is
specified.
Committer notes:
Before:
# perf mem -t store record usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.020 MB perf.data (7 samples) ]
# perf evlist
cycles:ppp
#
After:
# perf mem -t store record usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.020 MB perf.data (7 samples) ]
# perf evlist
cpu/mem-stores/P
#
Reported-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Fixes: acbe613e0c ("perf tools: Add monitored events array")
Link: http://lkml.kernel.org/r/1470905457-18311-1-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add -U/-K (--all-user/--all-kernel) options to use the perf record
--all-user/--all-kernel options.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1458823940-24583-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since we only deal with fields in the passed struct perf_sample move
this method to struct machine, that is where the perf_sample fields
will be resolved to a struct addr_location, i.e. thread, map, symbol,
etc.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Hemant Kumar <hemant@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-a1ww2lbm2vbuqsv4p7ilubu9@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Wrap perf_mem_events[].name into perf_mem_events__name() so we could alter the
events name if needed.
This will be handy when changing latency settings for loads event in following
patch.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1456303616-26926-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Check if current kernel support available memory events and display the
status within -e list option:
$ perf mem record -e list
ldlat-loads : available
ldlat-stores : available
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1456303616-26926-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Adding -e option for perf mem record command, to be able to specify
memory event directly.
Get list of available events:
$ perf mem record -e list
ldlat-loads
ldlat-stores
Monitor ldlat-loads:
$ perf mem record -e ldlat-loads true
Committer notes:
Further testing:
# perf mem record -e ldlat-loads true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.020 MB perf.data (10 samples) ]
# perf evlist
cpu/mem-loads,ldlat=30/P
#
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1455525293-8671-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It will ease up configuration of memory events and addition of other
memory events in following patches.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1455525293-8671-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Move the subcommand-related files from perf to a new library named
libsubcmd.a.
Since we're moving files anyway, go ahead and rename 'exec_cmd.*' to
'exec-cmd.*' to be consistent with the naming of all the other files.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/c0a838d4c878ab17fee50998811612b2281355c1.1450193761.git.jpoimboe@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When an error occurs an error value is just returned without freeing the
session. So allocating and freeing session have to be matched as a pair
even if an error occurs.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1435752499-11752-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In addition to using refcounts for the struct thread lifetime
management, we need to protect access to machine->threads from
concurrent access.
That happens in 'perf top', where a thread processes events, inserting
and deleting entries from that rb_tree while another thread decays
hist_entries, that end up dropping references and ultimately deleting
threads from the rb_tree and releasing its resources when no further
hist_entry (or other data structures, like in 'perf sched') references
it.
So the rule is the same for refcounts + protected trees in the kernel,
get the tree lock, find object, bump the refcount, drop the tree lock,
return, use object, drop the refcount if no more use of it is needed,
keep it if storing it in some other data structure, drop when releasing
that data structure.
I.e. pair "t = machine__find(new)_thread()" with a "thread__put(t)", and
"perf_event__preprocess_sample(&al)" with "addr_location__put(&al)".
The addr_location__put() one is because as we return references to
several data structures, we may end up adding more reference counting
for the other data structures and then we'll drop it at
addr_location__put() time.
Acked-by: David Ahern <dsahern@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-bs9rt4n0jw3hi9f3zxyy3xln@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Enable perf mem to use perf.data when it is not owned by current user or
root.
Example:
# perf mem -t load record ls
# chown Yunlong.Song:Yunlong.Song perf.data
# ls -al perf.data
-rw------- 1 Yunlong.Song Yunlong.Song 16392 Apr 2 14:34 perf.data
# id
uid=0(root) gid=0(root) groups=0(root),64(pkcs11)
Before this patch:
# perf mem -D report
File perf.data not owned by current user or root (use -f to override)
# perf mem -D -f report
Error: unknown switch `f'
usage: perf mem [<options>] {record|report}
-t, --type <type> memory operations(load,store) Default load,store
-D, --dump-raw-samples
dump raw samples in ASCII
-U, --hide-unresolved
Only display entries resolved to a symbol
-i, --input <file> input file name
-C, --cpu <cpu> list of cpus to profile
-x, --field-separator <separator>
separator for columns, no spaces will be added
between columns '.' is reserved.
As shown above, the -f option does not work at all.
After this patch:
# perf mem -D report
File perf.data not owned by current user or root (use -f to override)
# perf mem -D -f report
# PID, TID, IP, ADDR, LOCAL WEIGHT, DSRC, SYMBOL
39095 39095 0xffffffff81127e40 0x016ffff887f45148338 8 0x68100142
/proc/kcore:perf_event_aux
39095 39095 0xffffffff8100a3fe 0xffff89007f8cb7d0 6 0x68100142
/proc/kcore:native_sched_clock
39095 39095 0xffffffff81309139 0xffff88bf44c9ded8 6 0x68100142
/proc/kcore:acpi_map_lookup
39095 39095 0xffffffff810f8c4c 0xffff89007f8ccd88 6 0x68100142
/proc/kcore:rcu_nmi_exit
39095 39095 0xffffffff81136346 0xffff88fea995dd50 6 0x68100142
/proc/kcore:unlock_page
39095 39095 0xffffffff812a64a2 0xffff88fea995dcc8 6 0x68100142
/proc/kcore:half_md4_transform
39095 39095 0x7f0cf877c7e9 0x25dfb94 6 0x68100142
/lib64/libc-2.19.so:__readdir64
39095 39095 0x7f0cf87575a3 0x7f0cf9163731 6 0x68100142
/lib64/libc-2.19.so:__strcoll_l
39095 39095 0xffffffff8116910e 0xffffea01c1bfbd50 23 0x68100242
/proc/kcore:page_remove_rmap
As shown above, the -f option really works now.
Signed-off-by: Yunlong Song <yunlong.song@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1427982439-27388-7-git-send-email-yunlong.song@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Both 'perf diff' and 'perf mem' have 'field-separator' option, which
causes segfault if passed with empty string. This patch uses previously
introduced 'OPT_STRING_NOEMPTY' option macro to prevent fault.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: pi3orama@163.com
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1426820272-23302-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
By keeping pointers to machines, evlist and tool in ordered_events.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-0c6huyaf59mqtm2ek9pmposl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Just like the other parameters, grouping it on the builtin-mem specific
config area: struct perf_mem.
Acked-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Fowles <rfowles@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-ad8ns5l51ongemfsir3zy09x@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
This patch modifies perf mem to default to sampling loads and stores
simultaneously. It could only do one or the other before yet there was
no hardware restriction preventing simultaneous collection. With this
patch, one run is sufficient to collect both.
It is still possible to sample only loads or stores by using the
-t option:
$ perf mem -t load rec
$ perf mem -t load rep
Or
$ perf mem -t store rec
$ perf mem -t store rep
The perf report TUI will show one event at a time. The store output will
contain a Weight column which will be empty.
In V2, we updated the man pages to reflect the change and also simplify
the initialization of the argv vector passed to the cmd_*() functions as
per LKML feedback.
In V3, we fixed typos in the changelog.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Joe Mario <jmario@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Richard Fowles <rfowles@redhat.com>
Link: http://lkml.kernel.org/r/20141217152355.GA10053@thinkpad
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim
Jin Yao
Kan Liang
Leo Yan
Ian Rogers
Zou Wei
Mamatha Inamdar
Arnaldo Carvalho de Melo
Jiri Olsa
Andi Kleen
Ingo Molnar
Greg Kroah-Hartman
Martin Kepplinger
Kan Liang
Hari Bathini
Josh Poimboeuf
Taeung Song
Yunlong Song
Wang Nan
Stephane Eranian