John W. Linville says:
====================
Please excuse this larger-than-I-would-like pull request intended
for the 3.9 stream. There are a number of late-breaking fixes,
including a revert...
Regarding the mac80211 bits, Johannes says:
"I have two tracing fixes (one from Vladimir), two fixes for P2P device
crashes, a fix for a BSS memory leak/lost update problem and a fix from
Ben for a scanning issue in mac80211. It's a little on the large side
because one of the P2P device problems required a bit much locking work,
but I've run through all the different scenarios (wext/nl80211,
p2p-device/station interface, ifdown/rfkill) to verify locking with
lockdep."
As for the iwlwifi bits, Johannes says:
"I have three little fixes to the driver from Emmanuel. One addresses a
small bug Ben Hutchings found during the stable review process and two
address some warnings in the driver when RF-Kill is asserted."
Along with those...
Avinash Patil fixes an mwifiex bug cause by failing to process a sleep
command due to bad SKB manipulation when going into power saving mode.
Colin Ian King avoids a null pointer dereference in iwl4965.
Dan Williams officially announces that he has dropped maintainership
of the libertas driver.
Iestyn C. Elfick adds a work-around to avoid b43 DMA transmision
sequence error that would lead to a device reset.
Luis R. Rodriguez avoids an ath9k warning by not queueing a work item
while going to suspend mode.
Rafał Miłecki provides a pair of b43 N-PHY fixes related to RSSI
calibration.
Finally, I revert "brcmsmac: support 4313iPA" because it has been
reported in many places to cause problems with the already supported
4313ePA devices.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
- Fix for a recent cpufreq regression related to acpi-cpufreq and
suspend/resume from Viresh Kumar.
- cpufreq stats reference counting fix from Viresh Kumar.
- intel_pstate driver fixes from Dirk Brandewie and
Konrad Rzeszutek Wilk.
- New ACPI suspend blacklist entry for Sony Vaio VGN-FW21M from
Fabio Valentini.
- ACPI Platform Error Interface (APEI) fix from Chen Gong.
- PCI root bridge hotplug locking fix from Yinghai Lu.
/
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=0bjZ
-----END PGP SIGNATURE-----
Merge tag 'pm+acpi-3.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management fixes from Rafael J Wysocki:
- Fix for a recent cpufreq regression related to acpi-cpufreq and
suspend/resume from Viresh Kumar.
- cpufreq stats reference counting fix from Viresh Kumar.
- intel_pstate driver fixes from Dirk Brandewie and Konrad Rzeszutek
Wilk.
- New ACPI suspend blacklist entry for Sony Vaio VGN-FW21M from Fabio
Valentini.
- ACPI Platform Error Interface (APEI) fix from Chen Gong.
- PCI root bridge hotplug locking fix from Yinghai Lu.
* tag 'pm+acpi-3.9-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PCI / ACPI: hold acpi_scan_lock during root bus hotplug
ACPI / APEI: fix error status check condition for CPER
ACPI / PM: fix suspend and resume on Sony Vaio VGN-FW21M
cpufreq: acpi-cpufreq: Don't set policy->related_cpus from .init()
cpufreq: stats: do cpufreq_cpu_put() corresponding to cpufreq_cpu_get()
intel-pstate: Use #defines instead of hard-coded values.
cpufreq / intel_pstate: Fix calculation of current frequency
cpufreq / intel_pstate: Add function to check that all MSRs are valid
Pull crypto fixes from Herbert Xu:
"This removes IPsec ESN support from the talitos/caam drivers since
they were implemented incorrectly, causing interoperability problems
if ESN is used with them."
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
Revert "crypto: caam - add IPsec ESN support"
Revert "crypto: talitos - add IPsec ESN support"
* OMAP display fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=CIGs
-----END PGP SIGNATURE-----
Merge tag 'fbdev-fixes-3.9-rc4' of git://gitorious.org/linux-omap-dss2/linux
Pull fbdev fixes from Tomi Valkeinen:
"Since Florian is still away/inactive, I volunteered to collect fbdev
fixes for 3.9 and changes for 3.10. I didn't receive any other fbdev
fixes than OMAP yet, but I didn't want to delay this further as
there's a compilation fix for OMAP1. So there could be still some
fbdev fixes on the way a bit later.
This contains:
- Fix OMAP1 compilation
- OMAP display fixes"
* tag 'fbdev-fixes-3.9-rc4' of git://gitorious.org/linux-omap-dss2/linux:
omapdss: features: fix supported outputs for OMAP4
OMAPDSS: tpo-td043 panel: fix data passing between SPI/DSS parts
omapfb: fix broken build on OMAP1
Pull userns fixes from Eric W Biederman:
"The bulk of the changes are fixing the worst consequences of the user
namespace design oversight in not considering what happens when one
namespace starts off as a clone of another namespace, as happens with
the mount namespace.
The rest of the changes are just plain bug fixes.
Many thanks to Andy Lutomirski for pointing out many of these issues."
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
userns: Restrict when proc and sysfs can be mounted
ipc: Restrict mounting the mqueue filesystem
vfs: Carefully propogate mounts across user namespaces
vfs: Add a mount flag to lock read only bind mounts
userns: Don't allow creation if the user is chrooted
yama: Better permission check for ptraceme
pid: Handle the exit of a multi-threaded init.
scm: Require CAP_SYS_ADMIN over the current pidns to spoof pids.
Some network drivers use a non default hard_header_len
Transmitted skb should take into account dev->hard_header_len, or risk
crashes or expensive reallocations.
In the case of aoe, lets reserve MAX_HEADER bytes.
David reported a crash in defxx driver, solved by this patch.
Reported-by: David Oostdyk <daveo@ll.mit.edu>
Tested-by: David Oostdyk <daveo@ll.mit.edu>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Ed Cashin <ecashin@coraid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The previous configuration used the wrong "clk" pin. Without this
change mv_sdio worked because the bootloader would set the pin up, but
with a bootloader that does not set the pin, mv_sdio fails to detect any
card.
I have tested this change using a mwifiex_sdio wireless network adapter
over the SDIO interface.
Signed-off-by: Ryan Press <ryan@presslab.us>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
The crypto functionality in the orion5x dtsi uses the Ethernet IRQ and
so things do not work and there is much grumbling at boot time.
The IRQ for the crypto should be 28, and not 22, and that is what this
patch corrects.
Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
orion5x.dtsi is missing the gpio alias as well as including a typo
('ngpio' instead of 'ngpios') that prevented the orion-gpio driver
from loading. Also missing were the interrupt-controller properties.
This patches resolves those glitches.
Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
mvsdio_platform_data allows to pass card detect and write protect gpio
numbers to the driver. Some kirkwood boards don't use both pins as they
are not connected, and don't set the corresponding value in platform_data.
This will leave the unset values in platform_data initialized as 0, which
is in fact a valid gpio pin. mvsdio will grab that pin and configure it as
gpio, which in turn breaks nand controller as mpp0 also carries nand_io2.
This patch fixes the above by initializing unused gpio functions in the
platform_data with an invalid (-1) value.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
Reported-by: Soeren Moch <smoch@web.de>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
The commit 3a6f08a37 "arm: mvebu: Add support for local interrupt",
managed the 28th first interrupts as local interrupt to match the
hardware specification. Among these interrupts there are the Gigabits
Ethernet ones used by the mvneta driver. Unfortunately the state of
the percpu_irq API prevents the driver to use it.
Indeed the interrupts have to be freed when the .stop() function is
called. As the free_percpu_irq() function don't disable the interrupt
line, we have to do it on each CPU before calling this. The function
disable_percpu_irq() only disable the percpu on the current CPU and
there is no function which allows to disable a percpu irq on a given
CPU. Waiting for the extension of the percpu_irq API, this fix allows
to use again the mvneta driver.
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
This fixes "Too few good blocks within range" issues on GoFlex Net by setting
chip-delay to 40.
The basic problem was discussed at http://forum.doozan.com/read.php?2,7451
Signed-off-by: Eric Hutter <hutter.eric@gmail.com>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Cc: <stable@vger.kernel.org> # v3.6.x
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
It enhances the driver for FTDI-based USB serial adapters
to recognize Mitsubishi Electric Corp. USB/RS422 Converters
as FT232BM chips and support them.
https://search.meau.com/?q=FX-USB-AW
Signed-off-by: Konstantin Holoborodko <klh.kernel@gmail.com>
Tested-by: Konstantin Holoborodko <klh.kernel@gmail.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix to return a negative error code from the error handling
case instead of 0, as returned elsewhere in this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Reviewed-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Alex Romosan reported that since the mac80211 changes in
"mac80211: start auth/assoc timeout on frame status" and
the subsequent fixes in "mac80211: fix auth/assoc timeout
handling" (commits 1672c0e319 and 89afe614c0) there's
sometimes an issue connecting to a 5 GHz network with the
iwlwifi DVM driver.
The reason appears to be that since these commits any bad
TX status makes mac80211 immediately try again, causing
all of the authentication attempts to be quickly rejected
by the firmware as it hasn't heard a beacon yet. Before,
it would wait for the timeout regardless of status.
To fix this, invoke the passive-no-RX workaround when not
associated yet as well. This will cause the first frame
to get lost, but then the driver will stop the queues and
the second attempt will only be transmitted after hearing
a beacon, thus delaying it appropriately to not make the
firmware reject it again.
Reported-by: Alex Romosan <romosan@sycorax.lbl.gov>
Tested-by: Alex Romosan <romosan@sycorax.lbl.gov>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If we don't find the expected csum item, but find a csum item which is
adjacent to the specified extent, we should return -EFBIG, or we should
return -ENOENT. But btrfs_lookup_csum() return -EFBIG even the csum item
is not adjacent to the specified extent. Fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
We reserve the space for csums only when we write data into a file, in
the other cases, such as tree log, log replay, we don't do reservation,
so we can use the reservation of the transaction handle just for the former.
And for the latter, we should use the tree's own reservation. But the
function - btrfs_csum_file_blocks() didn't differentiate between these
two types of the cases, fix it.
Signed-off-by: Miao Xie <miaox@cn.fujitsu.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
The function btrfs_find_all_roots is responsible to allocate
memory for 'roots' and free it if errors happen,so the caller should not
free it again since the work has been done.
Besides,'tmp' is allocated after the function btrfs_find_all_roots,
so we can return directly if btrfs_find_all_roots() fails.
Signed-off-by: Wang Shilong <wangsl-fnst@cn.fujitsu.com>
Reviewed-by: Miao Xie <miaox@cn.fujitsu.com>
Reviewed-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
A user reported a problem where he was getting early ENOSPC with hundreds of
gigs of free data space and 6 gigs of free metadata space. This is because the
global block reserve was taking up the entire free metadata space. This is
ridiculous, we have infrastructure in place to throttle if we start using too
much of the global reserve, so instead of letting it get this huge just limit it
to 512mb so that users can still get work done. This allowed the user to
complete his rsync without issues. Thanks
Cc: stable@vger.kernel.org
Reported-and-tested-by: Stefan Priebe <s.priebe@profihost.ag>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
We need to hold the ordered_operations mutex while waiting on ordered extents
since we splice and run the ordered extents list. We need to make sure anybody
else who wants to wait on ordered extents does actually wait for them to be
completed. This will keep us from bailing out of flushing in case somebody is
already waiting on ordered extents to complete. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
We are way over-reserving for unlink and rename. Rename is just some random
huge number and unlink accounts for tree log operations that don't actually
happen during unlink, not to mention the tree log doesn't take from the trans
block rsv anyway so it's completely useless. Thanks,
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
Dave reported a warning when running xfstest 275. We have been leaking delalloc
metadata space when our reservations fail. This is because we were improperly
calculating how much space to free for our checksum reservations. The problem
is we would sometimes free up space that had already been freed in another
thread and we would end up with negative usage for the delalloc space. This
patch fixes the problem by calculating how much space the other threads would
have already freed, and then calculate how much space we need to free had we not
done the reservation at all, and then freeing any excess space. This makes
xfstests 275 no longer have leaked space. Thanks
Cc: stable@vger.kernel.org
Reported-by: David Sterba <dsterba@suse.cz>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
When you take a snapshot, punch a hole where there has been data, then take
another snapshot and try to send an incremental stream, btrfs send would
give you EIO. That is because is_extent_unchanged had no support for holes
being punched. With this patch, instead of returning EIO we just return
0 (== the extent is not unchanged) and we're good.
Signed-off-by: Jan Schmidt <list.btrfs@jan-o-sch.net>
Cc: Alexander Block <ablock84@gmail.com>
Signed-off-by: Josef Bacik <jbacik@fusionio.com>
* acpi-fixes:
PCI / ACPI: hold acpi_scan_lock during root bus hotplug
ACPI / APEI: fix error status check condition for CPER
ACPI / PM: fix suspend and resume on Sony Vaio VGN-FW21M
* pm-fixes:
cpufreq: acpi-cpufreq: Don't set policy->related_cpus from .init()
cpufreq: stats: do cpufreq_cpu_put() corresponding to cpufreq_cpu_get()
intel-pstate: Use #defines instead of hard-coded values.
cpufreq / intel_pstate: Fix calculation of current frequency
cpufreq / intel_pstate: Add function to check that all MSRs are valid
From Ryan Mallon <rmallon@gmail.com>:
It is a regression fix for some ep93xx boards which are failing to boot
on current mainline. The patch has been tested in next over the last
few days.
* tag 'ep93xx-fixes-for-3.9-rc5' of git://github.com/RyanMallon/linux-ep93xx:
ARM: ep93xx: Fix wait for UART FIFO to be empty
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Running suspend/resume without no_console_suspend setting on kernel
cmdline will likely makes system hang. It causesd by the sync issue
between imx_cpu_die() and imx_cpu_kill() call. Fix the issue by
synchronizing the calls using cpu jumping argument register which is
free to use in kernel.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iQEcBAABAgAGBQJRU60+AAoJEFBXWFqHsHzOTzAIAL0t34b0Pd1FRuybb8q1uwGJ
Xe7gr/knRLszQ6FemX4F2qqU3Xdx2OLjET6iZT1j1pcO2WOUB93C0Pa6hwZ7u8ex
4EMgBiwaEqnr8ICkPMEQIrJ/ja8VIazYwgFDk3MDV4djIDPEdl6CZz9BOWXSce8M
f9o8YhmVvV5TINz9TxOKNA19qxjxqR8K/WT3DsiTxmo7660rtMO4VNhPFhRLMRlm
8qd0SSZ9XYNa05aJdXa+YayCpm6SGdcSj6fWrpDmQ4926D9dhvX/TEDNqmibfUyw
7YAyk2p1U8W5+20nUrYDjZnfBzLgaTFg60Y60DrYbcOPk7ZlqRgGk0SyIjGwyjw=
=V81t
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-3.9-4' of git://git.linaro.org/people/shawnguo/linux-2.6 into fixes
From Shawn Guo <shawn.guo@linaro.org>:
The imx fixes for 3.9, take 4:
Running suspend/resume without no_console_suspend setting on kernel
cmdline will likely makes system hang. It causesd by the sync issue
between imx_cpu_die() and imx_cpu_kill() call. Fix the issue by
synchronizing the calls using cpu jumping argument register which is
free to use in kernel.
* tag 'imx-fixes-3.9-4' of git://git.linaro.org/people/shawnguo/linux-2.6:
ARM: imx: fix sync issue between imx_cpu_die and imx_cpu_kill
ARM: imx: add dependency check for DEBUG_IMX_UART_PORT
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Submitted by me since BenH is on vacation.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=rm4T
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sfr/next-fixes
Pull powerpc build fixes from Stephen Rothwell:
"Just a couple of build fixes for powerpc all{mod,yes}config.
Submitted by me since BenH is on vacation."
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sfr/next-fixes:
powerpc: define the conditions where the ePAPR idle hcall can be supported
powerpc: make additional room in exception vector area
- Get TCPM and TCDM locations from the device tree
- Skip passing the ios_handler for the MMCI
- Enable the ethernet clock for Snowball
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.10 (GNU/Linux)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=v6nX
-----END PGP SIGNATURE-----
Merge tag 'ux500-fixes-for-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into fixes
From Linus Walleij <linus.walleij@stericsson.com>:
Fixes boot regressions on Device Tree:
- Get TCPM and TCDM locations from the device tree
- Skip passing the ios_handler for the MMCI
- Enable the ethernet clock for Snowball
* tag 'ux500-fixes-for-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
ARM: ux500: Enable the clock controlling Ethernet on Snowball
ARM: ux500: Stop passing ios_handler() as an MMCI power controlling call-back
ARM: ux500: Apply the TCPM and TCDM locations and sizes to dbx5x0 DT
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
We don't grab the modeset locks any more since
commit 468174f748
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date: Tue Dec 11 00:09:12 2012 +0100
drm: push modeset_lock_all into ->fb_create driver callbacks
Reported-by: Ray Strode <rstrode@redhat.com>
Cc: Ray Strode <rstrode@redhat.com>
Cc: Dave Airlie <airlied@gmail.com>
Acked-by: Dave Airlie <airlied@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
- Regression fixes for C-and-P states not being parsed properly.
- Fix possible security issue with guests triggering DoS via non-assigned MSI-Xs.
- Fix regression (introduced in v3.7) with raising an event (v2).
- Fix hastily introduced band-aid during c0 for the CR3 blowup.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEcBAABAgAGBQJRUxlVAAoJEFjIrFwIi8fJiUsH/2a3A8EVqS7OYDNgT0ZFb1VI
rMLNiA50sRJNDsq0NbGl1Y+Lubus1czc0c7HXFQ557OakN6WqcmPPjCKp4JT6NnV
Jz/IZ0iimdoHiPru1Qe4ah3fSgzUtht2LB48Z/a0Is4k3LsRP2W3/niVC3ypnyuJ
52HjjuxeFAfXIkNeqsrO2a6cUXZeXzUyR4g9GNxDozi4jHpoPQ4j9okZbo218xH+
/pRnFeMD7t7dFkgNeyeGXUiJn2AkNPHi3Hx+RH5nN9KXQ1eem9R4p7Qpez1dUEWF
YEc/bs7MyOYezzTVHPYk77Yt8baOHJt7UbHjM6jfi1aGYYINTRr3m5mORd3rCmc=
=61IX
-----END PGP SIGNATURE-----
Merge tag 'stable/for-linus-3.9-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
Pull Xen bug-fixes from Konrad Rzeszutek Wilk:
"This is mostly just the last stragglers of the regression bugs that
this merge window had. There are also two bug-fixes: one that adds an
extra layer of security, and a regression fix for a change that was
added in v3.7 (the v1 was faulty, the v2 works).
- Regression fixes for C-and-P states not being parsed properly.
- Fix possible security issue with guests triggering DoS via
non-assigned MSI-Xs.
- Fix regression (introduced in v3.7) with raising an event (v2).
- Fix hastily introduced band-aid during c0 for the CR3 blowup."
* tag 'stable/for-linus-3.9-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/events: avoid race with raising an event in unmask_evtchn()
xen/mmu: Move the setting of pvops.write_cr3 to later phase in bootup.
xen/acpi-stub: Disable it b/c the acpi_processor_add is no longer called.
xen-pciback: notify hypervisor about devices intended to be assigned to guests
xen/acpi-processor: Don't dereference struct acpi_processor on all CPUs.
This fixes a regression introduced by common clk enablement.
On some u8500 based boards, the FMSC clock which is usually used
for flash, is wired up to the SMSC911x Ethernet driver. However,
the SMSC911x doesn't have common clk support yet, rendering it
unusable. Prior to the introduction of common clk the FMSC clock
was default on; however, common clk disables all clocks by default
and insists drivers take responsibility to enable theirs.
This fix enables the FMSC clock on Snowball, subsequently turning
on the SMSC911x Ethernet chip. It will be removed when the driver
is compatible with common clk.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This fixes a regression introduced during the v3.9 merge window.
Now MMCI on/off functionality is using the regulator framework
from the MMCI driver, if we provide the ios_handler call-back we
essentially duplicate functionality, which causes a large mess
and lots of booting issues.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This fixes a regression introduced by commit:
05ec260 mfd:db8500-prcmu: update resource passing
All DBx5x0 based SoCs have access to two Tightly Coupled Memory
(TCM) locations based on the PRCMU itself. One area from program
memory (TCPM) and one for data memory (TCDM). The PRCMU needs to
know where these are in order to function correctly. However,
these are currently passed though platform device resources, which
can only be obtained if Device Tree booting isn't in use. Thus we
must also support them in DT by supplying them through the PRCMU
node.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
conversion, and few USB regression fixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=DYTR
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v3.9-rc3/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
From Tony Lindgren <tony@atomide.com>:
A clock regression fix that happened with the common clock
conversion, and few USB regression fixes.
* tag 'omap-for-v3.9-rc3/fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP: clocks: Delay clk inits atleast until slab is initialized
ARM: OMAP4: PM: fix PM regression introduced by recent clock cleanup
ARM: OMAP3: hwmod data: keep MIDLEMODE in force-standby for musb
ARM: OMAP4: clock data: lock USB DPLL on boot
ARM: OMAP1: fix USB host on 1710
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
A fix from Morimoto-san to correct the horizontal location of output.
I apologise for this being posted late in the cycle.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=nMFI
-----END PGP SIGNATURE-----
Merge tag 'renesas-fbdev-fixes-for-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes
From Simon Horman <horms+renesas@verge.net.au>:
Renesas fbdev fixes for v3.9
A fix from Morimoto-san to correct the horizontal location of output.
I apologise for this being posted late in the cycle.
* tag 'renesas-fbdev-fixes-for-v3.9' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
fbdev: sh_mobile_lcdc: fixup B side hsync adjust settings
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull HID fixes from Jiri Kosina:
- fix for potential 3.9 regression in handling of buttons for touchpads
following HID mt specification; potential because reportedly there is
no retail product on the market that would be using this feature, but
nevertheless we'd better follow the spec. Fix by Benjamin Tissoires.
- support for two quirky devices added by Josh Boyer.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: multitouch: fix touchpad buttons
HID: usbhid: fix build problem
HID: usbhid: quirk for MSI GX680R led panel
HID: usbhid: quirk for Realtek Multi-card reader
Marc Kleine-Budde says:
====================
here's a patch series for net for the v3.9 release cycle. Fengguang Wu found
two problems with the sja1000 drivers:
A macro in the SH architecture collides with one in the sja1000 driver. I
created a minimal patch suited for stable, only changing this particular
define. (Once net is merged back to net-next, I'll post a patch to uniformly
use a SJA1000_ prefix for the sja100 private defines.) If you prefer, I can
squash both patches together.
Fengguang further noticed that the peak pcmcia driver will not compile on archs
without ioport support. I created a patch to limit the driver to archs which
select HAS_IOPORT in Kconfig.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jeff Kirsher says:
====================
This series contains updates to e1000, ixgb and e1000e for Christoph.
Christoph provides 3 patches to resolve missing dma_error_call's to
provided Intel drivers which did not have this fix.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Steffen Klassert says:
====================
1) Initialize the satype field in key_notify_policy_flush(),
this was left uninitialized. From Nicolas Dichtel.
2) The sequence number difference for replay notifications
was misscalculated on ESN sequence number wrap. We need
a separate replay notify function for esn.
3) Fix an off by one in the esn replay notify function.
From Mathias Krause.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 184b89044f ("tg3: Use VPD fw version
when present") introduced VPD parsing that contained a potential length
overflow.
Limit the hardware's reported firmware string length (max 255 bytes) to
stay inside the driver's firmware string length (32 bytes). On overflow,
truncate the formatted firmware string instead of potentially overwriting
portions of the tg3 struct.
http://cansecwest.com/slides/2013/PrivateCore%20CSW%202013.pdf
Signed-off-by: Kees Cook <keescook@chromium.org>
Reported-by: Oded Horovitz <oded@privatecore.com>
Reported-by: Brad Spengler <spender@grsecurity.net>
Cc: stable@vger.kernel.org
Cc: Matt Carlson <mcarlson@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To restart tx queue use netif_wake_queue() intead of netif_start_queue()
so that net schedule will restart transmission immediately which will
increase network performance while doing huge data transfers.
Reported-by: Dan Franke <dan.franke@schneider-electric.com>
Suggested-by: Sriramakrishnan A G <srk@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To restart tx queue use netif_wake_queue() intead of netif_start_queue()
so that net schedule will restart transmission immediately which will
increase network performance while doing huge data transfers.
Reported-by: Dan Franke <dan.franke@schneider-electric.com>
Suggested-by: Sriramakrishnan A G <srk@ti.com>
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix to return a negative error code from the error handling case
instead of 0(possible overwrite to 0 by ops->fill_xstats call),
as returned elsewhere in this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
Without this patch
1. boot with nfs (no_console_suspend)
2. echo mem >/sys/power/state
3. wakeup by wakesource
4. print "eth0: tx queue full"
This fix above problem by reinit bd queue at restart function
Signed-off-by: Frank Li <Frank.Li@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Fix to return a negative error code from the error handling
case instead of 0, as returned elsewhere in function
nf_conntrack_standalone_init().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
David S. Miller
Linus Torvalds
John W. Linville
Eric Dumazet
Ryan Press
Alexander Clouter
Sebastian Hesselbarth
Gregory CLEMENT
Eric Hutter
Konstantin Holoborodko
Wei Yongjun
Johannes Berg
Miao Xie
Wang Shilong
Josef Bacik
Jan Schmidt
Rafael J. Wysocki
Arnd Bergmann
Daniel Vetter
Lee Jones
Dmitry Kravkov
Kees Cook
Sergey Popovich
Mugunthan V N
Frank Li