Removing unreachable code from nvme_abort_req as nvme_submit_cmd has no
failure status to return.
Signed-off-by: Sunad Bhandary <sunad.s@samsung.com>
Acked-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The SG_GAPS queue flag caused checks for bio vector alignment against
PAGE_SIZE, but the device may have different constraints. This patch
adds a queue limits so a driver with such constraints can set to allow
requests that would have been unnecessarily split. The new gaps check
takes the request_queue as a parameter to simplify the logic around
invoking this function.
This new limit makes the queue flag redundant, so removing it and
all usage. Device-mappers will inherit the correct settings through
blk_stack_limits().
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
This reverts commit 34b48db66e.
That commit caused performance regressions for streaming I/O
workloads on a number of different storage devices, from
SATA disks to external RAID arrays. It also managed to
trip up some buggy firmware in at least one drive, causing
data corruption.
The next patch will bump the default max_sectors_kb value to
1280, which will accommodate a 10-data-disk stripe write
with chunk size 128k. In the testing I've done using iozone,
fio, and aio-stress, a value of 1280 does not show a big
performance difference from 512. This will hopefully still
help the software RAID setup that Christoph saw the original
performance gains with while still not regressing other
storage configurations.
Signed-off-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Controllers can perform optional subsystem resets as introduced in NVMe
1.1. This patch adds an IOCTL to trigger the subsystem reset by writing
"NVMe" to the NSSR register.
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Acked-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Controllers part of an NVMe subsystem may be reset by any other controller
in the subsystem. If the device is capable of subsystem resets, this
patch adds detection for such events and performs appropriate controller
initialization upon subsystem reset detection.
The register bit is a RW1C type, so the driver needs to write a 1 to the
status bit to clear the subsystem reset occured bit during initialization.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The logic in nvme_dev_add to enumerate namespaces was moved to
nvme_dev_scan. When moved, the nn variable is no longer used. This patch
removes it.
Fixes: a5768aai ("NVMe: Automatic namespace rescan")
Signed-off-by: Matias Bjørling <m@bjorling.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
This sets the queue's max segment size to match the device's
capabilities. The default of 128 is usable until a device's transfer
capability exceeds 512k, assuming a device page size of 4k. Many nvme
devices exceed that transfer limit, so this lets the block layer know what
kind of commands it to allow to form rather than unnecessarily split them.
One additional segment is added to account for a transfer that may start
in the middle of a page.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
The flags variable is used as u32 variable. This patch changes the type
to be u32.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch renames functions so that it is clear what the function does.
Otherwise it is not directly understandable what for example 'do_it' means.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Add some debugfs files that help to understand the internal state of
NBD. This exports the different sizes, flags, tasks and so on.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch uses nbd->task_recv to determine the value of the previously
used variable 'pid' for sysfs.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
This message was a warning without a reason. This patch moves it into
nbd_clear_que and transforms it to a debug message.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Instead of a variable 'harderror' we can simply try to correctly
propagate errors to the userspace.
This patch removes the harderror variable and passes errors through
error pointers and nbd_do_it back to the userspace.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch restructures sock_shutdown to avoid having the main code path
in an if block.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Move the conditional lock from sock_shutdown into the surrounding code.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
At the moment the nbd timeout just detects hanging tcp operations. This
is not enough to detect a hanging or bad connection as expected of a
timeout.
This patch redesigns the timeout detection to include some more cases.
The timeout is now in relation to replies from the server. If the server
does not send replies within the timeout the connection will be shut
down.
The patch adds a continous timer 'timeout_timer' that is setup in one of
two cases:
- The request list is empty and we are sending the first request out to
the server. We want to have a reply within the given timeout,
otherwise we consider the connection to be dead.
- A server response was received. This means the server is still
communicating with us. The timer is reset to the timeout value.
The timer is not stopped if the list becomes empty. It will just trigger
a timeout which will directly leave the handling routine again as the
request list is empty.
The whole patch does not use any additional explicit locking. The
list_empty() calls are safe to be used concurrently. The timer is locked
internally as we just use mod_timer and del_timer_sync().
The patch is based on the idea of Michal Belczyk with a previous
different implementation.
Cc: Michal Belczyk <belczyk@bsd.krakow.pl>
Cc: Hermann Lauer <Hermann.Lauer@iwr.uni-heidelberg.de>
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Tested-by: Hermann Lauer <Hermann.Lauer@iwr.uni-heidelberg.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
zram_meta_alloc() constructs a pool name for zs_create_pool() call as
snprintf(pool_name, sizeof(pool_name), "zram%d", device_id);
However, it defines pool name buffer to be only 8 bytes long (minus
trailing zero), which means that we can have only 1000 pool names: zram0
-- zram999.
With CONFIG_ZSMALLOC_STAT enabled an attempt to create a device zram1000
can fail if device zram100 already exists, because snprintf() will
truncate new pool name to zram100 and pass it debugfs_create_dir(),
causing:
debugfs dir <zram100> creation failed
zram: Error creating memory pool
... and so on.
Fix it by passing zram->disk->disk_name to zram_meta_alloc() instead of
divice_id. We construct zram%d name earlier and keep it as a ->disk_name,
no need to snprintf() it again.
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull xen block driver fixes from Jens Axboe:
"A few small bug fixes for xen-blk{front,back} that have been sitting
over my vacation"
* 'for-linus' of git://git.kernel.dk/linux-block:
xen-blkback: replace work_pending with work_busy in purge_persistent_gnt()
xen-blkfront: don't add indirect pages to list when !feature_persistent
xen-blkfront: introduce blkfront_gather_backend_features()
As generic_make_request() is now able to handle arbitrarily sized bios,
it's no longer necessary for each individual block driver to define its
own ->merge_bvec_fn() callback. Remove every invocation completely.
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Lars Ellenberg <drbd-dev@lists.linbit.com>
Cc: drbd-user@lists.linbit.com
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Yehuda Sadeh <yehuda@inktank.com>
Cc: Sage Weil <sage@inktank.com>
Cc: Alex Elder <elder@kernel.org>
Cc: ceph-devel@vger.kernel.org
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: dm-devel@redhat.com
Cc: Neil Brown <neilb@suse.de>
Cc: linux-raid@vger.kernel.org
Cc: Christoph Hellwig <hch@infradead.org>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Acked-by: NeilBrown <neilb@suse.de> (for the 'md' bits)
Acked-by: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
[dpark: also remove ->merge_bvec_fn() in dm-thin as well as
dm-era-target, and resolve merge conflicts]
Signed-off-by: Dongsu Park <dpark@posteo.net>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The way the block layer is currently written, it goes to great lengths
to avoid having to split bios; upper layer code (such as bio_add_page())
checks what the underlying device can handle and tries to always create
bios that don't need to be split.
But this approach becomes unwieldy and eventually breaks down with
stacked devices and devices with dynamic limits, and it adds a lot of
complexity. If the block layer could split bios as needed, we could
eliminate a lot of complexity elsewhere - particularly in stacked
drivers. Code that creates bios can then create whatever size bios are
convenient, and more importantly stacked drivers don't have to deal with
both their own bio size limitations and the limitations of the
(potentially multiple) devices underneath them. In the future this will
let us delete merge_bvec_fn and a bunch of other code.
We do this by adding calls to blk_queue_split() to the various
make_request functions that need it - a few can already handle arbitrary
size bios. Note that we add the call _after_ any call to
blk_queue_bounce(); this means that blk_queue_split() and
blk_recalc_rq_segments() don't need to be concerned with bouncing
affecting segment merging.
Some make_request_fn() callbacks were simple enough to audit and verify
they don't need blk_queue_split() calls. The skipped ones are:
* nfhd_make_request (arch/m68k/emu/nfblock.c)
* axon_ram_make_request (arch/powerpc/sysdev/axonram.c)
* simdisk_make_request (arch/xtensa/platforms/iss/simdisk.c)
* brd_make_request (ramdisk - drivers/block/brd.c)
* mtip_submit_request (drivers/block/mtip32xx/mtip32xx.c)
* loop_make_request
* null_queue_bio
* bcache's make_request fns
Some others are almost certainly safe to remove now, but will be left
for future patches.
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Ming Lei <ming.lei@canonical.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: dm-devel@redhat.com
Cc: Lars Ellenberg <drbd-dev@lists.linbit.com>
Cc: drbd-user@lists.linbit.com
Cc: Jiri Kosina <jkosina@suse.cz>
Cc: Geoff Levand <geoff@infradead.org>
Cc: Jim Paris <jim@jtan.com>
Cc: Philip Kelleher <pjk1939@linux.vnet.ibm.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Acked-by: NeilBrown <neilb@suse.de> (for the 'md/md.c' bits)
Acked-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
[dpark: skip more mq-based drivers, resolve merge conflicts, etc.]
Signed-off-by: Dongsu Park <dpark@posteo.net>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
For write/discard obj_requests that involved a copyup method call, the
opcode of the first op is CEPH_OSD_OP_CALL and the ->callback is
rbd_img_obj_copyup_callback(). The latter frees copyup pages, sets
->xferred and delegates to rbd_img_obj_callback(), the "normal" image
object callback, for reporting to block layer and putting refs.
rbd_osd_req_callback() however treats CEPH_OSD_OP_CALL as a trivial op,
which means obj_request is marked done in rbd_osd_trivial_callback(),
*before* ->callback is invoked and rbd_img_obj_copyup_callback() has
a chance to run. Marking obj_request done essentially means giving
rbd_img_obj_callback() a license to end it at any moment, so if another
obj_request from the same img_request is being completed concurrently,
rbd_img_obj_end_request() may very well be called on such prematurally
marked done request:
<obj_request-1/2 reply>
handle_reply()
rbd_osd_req_callback()
rbd_osd_trivial_callback()
rbd_obj_request_complete()
rbd_img_obj_copyup_callback()
rbd_img_obj_callback()
<obj_request-2/2 reply>
handle_reply()
rbd_osd_req_callback()
rbd_osd_trivial_callback()
for_each_obj_request(obj_request->img_request) {
rbd_img_obj_end_request(obj_request-1/2)
rbd_img_obj_end_request(obj_request-2/2) <--
}
Calling rbd_img_obj_end_request() on such a request leads to trouble,
in particular because its ->xfferred is 0. We report 0 to the block
layer with blk_update_request(), get back 1 for "this request has more
data in flight" and then trip on
rbd_assert(more ^ (which == img_request->obj_request_count));
with rhs (which == ...) being 1 because rbd_img_obj_end_request() has
been called for both requests and lhs (more) being 1 because we haven't
got a chance to set ->xfferred in rbd_img_obj_copyup_callback() yet.
To fix this, leverage that rbd wants to call class methods in only two
cases: one is a generic method call wrapper (obj_request is standalone)
and the other is a copyup (obj_request is part of an img_request). So
make a dedicated handler for CEPH_OSD_OP_CALL and directly invoke
rbd_img_obj_copyup_callback() from it if obj_request is part of an
img_request, similar to how CEPH_OSD_OP_READ handler invokes
rbd_img_obj_request_read_callback().
Since rbd_img_obj_copyup_callback() is now being called from the OSD
request callback (only), it is renamed to rbd_osd_copyup_callback().
Cc: Alex Elder <elder@linaro.org>
Cc: stable@vger.kernel.org # 3.10+, needs backporting for < 3.18
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Currently we have two different ways to signal an I/O error on a BIO:
(1) by clearing the BIO_UPTODATE flag
(2) by returning a Linux errno value to the bi_end_io callback
The first one has the drawback of only communicating a single possible
error (-EIO), and the second one has the drawback of not beeing persistent
when bios are queued up, and are not passed along from child to parent
bio in the ever more popular chaining scenario. Having both mechanisms
available has the additional drawback of utterly confusing driver authors
and introducing bugs where various I/O submitters only deal with one of
them, and the others have to add boilerplate code to deal with both kinds
of error returns.
So add a new bi_error field to store an errno value directly in struct
bio and remove the existing mechanisms to clean all this up.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Konrad writes:
"There are three bugs that have been found in the xen-blkfront (and
backend). Two of them have the stable tree CC-ed. They have been found
where an guest is migrating to a host that is missing
'feature-persistent' support (from one that has it enabled). We end up
hitting an BUG() in the driver code."
The BUG_ON() in purge_persistent_gnt() will be triggered when previous purge
work haven't finished.
There is a work_pending() before this BUG_ON, but it doesn't account if the work
is still currently running.
CC: stable@vger.kernel.org
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
We should consider info->feature_persistent when adding indirect page to list
info->indirect_pages, else the BUG_ON() in blkif_free() would be triggered.
When we are using persistent grants the indirect_pages list
should always be empty because blkfront has pre-allocated enough
persistent pages to fill all requests on the ring.
CC: stable@vger.kernel.org
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
There is a bug when migrate from !feature-persistent host to feature-persistent
host, because domU still thinks new host/backend doesn't support persistent.
Dmesg like:
backed has not unmapped grant: 839
backed has not unmapped grant: 773
backed has not unmapped grant: 773
backed has not unmapped grant: 773
backed has not unmapped grant: 839
The fix is to recheck feature-persistent of new backend in blkif_recover().
See: https://lkml.org/lkml/2015/5/25/469
As Roger suggested, we can split the part of blkfront_connect that checks for
optional features, like persistent grants, indirect descriptors and
flush/barrier features to a separate function and call it from both
blkfront_connect and blkif_recover
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
end_cmd finishes request associated with nullb_cmd struct, so we
should save pointer to request_queue in a local variable before
calling end_cmd.
The problem was causes general protection fault with slab poisoning
enabled.
Fixes: 8b70f45e2e ("null_blk: restart request processing on completion handler")
Tested-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Mike Krinkin <krinkin.m.u@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Uses div_u64 for u64 division and round_down, a bitwise operation,
instead of rounddown, which uses a modulus.
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Some controllers have a controller-side memory buffer available for use
for submissions, completions, lists, or data.
If a CMB is available, the entire CMB will be ioremapped and it will
attempt to map the IO SQes onto the CMB. The queues will be shrunk as
needed. The CMB will not be used if the queue depth is shrunk below some
threshold where it may have reduced performance over a larger queue
in system memory.
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch changes sq_cmd writers to instead create their command on
the stack. __nvme_submit_cmd copies the sq entry to the queue and writes
the doorbell.
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Some drivers use it now, others just set the limits field manually.
But in preparation for splitting this into a hard and soft limit,
ensure that they all call the proper function for setting the hw
limit for discards.
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This patch has the driver automatically reread partitions if a namespace
has a separate metadata format. Previously revalidating a disk was
sufficient to get the correct capacity set on such formatted drives,
but partitions that may exist would not have been surfaced.
Reported-by: Paul Grabinar <paul.grabinar@ranbarg.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Cc: Matthew Wilcox <willy@linux.intel.com>
Tested-by: Paul Grabinar <paul.grabinar@ranbarg.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Pull more vfs updates from Al Viro:
"Assorted VFS fixes and related cleanups (IMO the most interesting in
that part are f_path-related things and Eric's descriptor-related
stuff). UFS regression fixes (it got broken last cycle). 9P fixes.
fs-cache series, DAX patches, Jan's file_remove_suid() work"
[ I'd say this is much more than "fixes and related cleanups". The
file_table locking rule change by Eric Dumazet is a rather big and
fundamental update even if the patch isn't huge. - Linus ]
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (49 commits)
9p: cope with bogus responses from server in p9_client_{read,write}
p9_client_write(): avoid double p9_free_req()
9p: forgetting to cancel request on interrupted zero-copy RPC
dax: bdev_direct_access() may sleep
block: Add support for DAX reads/writes to block devices
dax: Use copy_from_iter_nocache
dax: Add block size note to documentation
fs/file.c: __fget() and dup2() atomicity rules
fs/file.c: don't acquire files->file_lock in fd_install()
fs:super:get_anon_bdev: fix race condition could cause dev exceed its upper limitation
vfs: avoid creation of inode number 0 in get_next_ino
namei: make set_root_rcu() return void
make simple_positive() public
ufs: use dir_pages instead of ufs_dir_pages()
pagemap.h: move dir_pages() over there
remove the pointless include of lglock.h
fs: cleanup slight list_entry abuse
xfs: Correctly lock inode when removing suid and file capabilities
fs: Call security_ops->inode_killpriv on truncate
fs: Provide function telling whether file_remove_privs() will do anything
...
Pull block fixes from Jens Axboe:
"Mainly sending this off now for the writeback fixes, since they fix a
real regression introduced with the cgroup writeback changes. The
NVMe fix could wait for next pull for this series, but it's simple
enough that we might as well include it.
This contains:
- two cgroup writeback fixes from Tejun, fixing a user reported issue
with luks crypt devices hanging when being closed.
- NVMe error cleanup fix from Jon Derrick, fixing a case where we'd
attempt to free an unregistered IRQ"
* 'for-linus' of git://git.kernel.dk/linux-block:
NVMe: Fix irq freeing when queue_request_irq fails
writeback: don't drain bdi_writeback_congested on bdi destruction
writeback: don't embed root bdi_writeback_congested in bdi_writeback
Pull Ceph updates from Sage Weil:
"We have a pile of bug fixes from Ilya, including a few patches that
sync up the CRUSH code with the latest from userspace.
There is also a long series from Zheng that fixes various issues with
snapshots, inline data, and directory fsync, some simplification and
improvement in the cap release code, and a rework of the caching of
directory contents.
To top it off there are a few small fixes and cleanups from Benoit and
Hong"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: (40 commits)
rbd: use GFP_NOIO in rbd_obj_request_create()
crush: fix a bug in tree bucket decode
libceph: Fix ceph_tcp_sendpage()'s more boolean usage
libceph: Remove spurious kunmap() of the zero page
rbd: queue_depth map option
rbd: store rbd_options in rbd_device
rbd: terminate rbd_opts_tokens with Opt_err
ceph: fix ceph_writepages_start()
rbd: bump queue_max_segments
ceph: rework dcache readdir
crush: sync up with userspace
crush: fix crash from invalid 'take' argument
ceph: switch some GFP_NOFS memory allocation to GFP_KERNEL
ceph: pre-allocate data structure that tracks caps flushing
ceph: re-send flushing caps (which are revoked) in reconnect stage
ceph: send TID of the oldest pending caps flush to MDS
ceph: track pending caps flushing globally
ceph: track pending caps flushing accurately
libceph: fix wrong name "Ceph filesystem for Linux"
ceph: fix directory fsync
...
Fixes an issue when queue_reuest_irq fails in nvme_setup_io_queues. This
patch initializes all vectors to -1 and resets the vector to -1 in the
case of a failure in queue_request_irq. This avoids the free_irq in
nvme_suspend_queue if the queue did not get an irq.
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
- Add "make xenconfig" to assist in generating configs for Xen guests.
- Preparatory cleanups necessary for supporting 64 KiB pages in ARM
guests.
- Automatically use hvc0 as the default console in ARM guests.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJVkpoqAAoJEFxbo/MsZsTRu3IH/2AMPx2i65hoSqfHtGf3sz/z
XNfcidVmOElFVXGaW83m0tBWMemT5LpOGRfiq5sIo8xt/8xD2vozEkl/3kkf3RrX
EmZDw3E8vmstBdBTjWdovVhNenRc0m0pB5daS7wUdo9cETq1ag1L3BHTB3fEBApO
74V6qAfnhnq+snqWhRD3XAk3LKI0nWuWaV+5HsmxDtnunGhuRLGVs7mwxZGg56sM
mILA0eApGPdwyVVpuDe0SwV52V8E/iuVOWTcomGEN2+cRWffG5+QpHxQA8bOtF6O
KfqldiNXOY/idM+5+oSm9hespmdWbyzsFqmTYz0LvQvxE8eEZtHHB3gIcHkE8QU=
=danz
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.2-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from David Vrabel:
"Xen features and cleanups for 4.2-rc0:
- add "make xenconfig" to assist in generating configs for Xen guests
- preparatory cleanups necessary for supporting 64 KiB pages in ARM
guests
- automatically use hvc0 as the default console in ARM guests"
* tag 'for-linus-4.2-rc0-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
block/xen-blkback: s/nr_pages/nr_segs/
block/xen-blkfront: Remove invalid comment
block/xen-blkfront: Remove unused macro MAXIMUM_OUTSTANDING_BLOCK_REQS
arm/xen: Drop duplicate define mfn_to_virt
xen/grant-table: Remove unused macro SPP
xen/xenbus: client: Fix call of virt_to_mfn in xenbus_grant_ring
xen: Include xen/page.h rather than asm/xen/page.h
kconfig: add xenconfig defconfig helper
kconfig: clarify kvmconfig is for kvm
xen/pcifront: Remove usage of struct timeval
xen/tmem: use BUILD_BUG_ON() in favor of BUG_ON()
hvc_xen: avoid uninitialized variable warning
xenbus: avoid uninitialized variable warning
xen/arm: allow console=hvc0 to be omitted for guests
arm,arm64/xen: move Xen initialization earlier
arm/xen: Correctly check if the event channel interrupt is present
Main excitement here is Peter Zijlstra's lockless rbtree optimization to
speed module address lookup. He found some abusers of the module lock
doing that too.
A little bit of parameter work here too; including Dan Streetman's breaking
up the big param mutex so writing a parameter can load another module (yeah,
really). Unfortunately that broke the usual suspects, !CONFIG_MODULES and
!CONFIG_SYSFS, so those fixes were appended too.
Cheers,
Rusty.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=tWPQ
-----END PGP SIGNATURE-----
Merge tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull module updates from Rusty Russell:
"Main excitement here is Peter Zijlstra's lockless rbtree optimization
to speed module address lookup. He found some abusers of the module
lock doing that too.
A little bit of parameter work here too; including Dan Streetman's
breaking up the big param mutex so writing a parameter can load
another module (yeah, really). Unfortunately that broke the usual
suspects, !CONFIG_MODULES and !CONFIG_SYSFS, so those fixes were
appended too"
* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (26 commits)
modules: only use mod->param_lock if CONFIG_MODULES
param: fix module param locks when !CONFIG_SYSFS.
rcu: merge fix for Convert ACCESS_ONCE() to READ_ONCE() and WRITE_ONCE()
module: add per-module param_lock
module: make perm const
params: suppress unused variable error, warn once just in case code changes.
modules: clarify CONFIG_MODULE_COMPRESS help, suggest 'N'.
kernel/module.c: avoid ifdefs for sig_enforce declaration
kernel/workqueue.c: remove ifdefs over wq_power_efficient
kernel/params.c: export param_ops_bool_enable_only
kernel/params.c: generalize bool_enable_only
kernel/module.c: use generic module param operaters for sig_enforce
kernel/params: constify struct kernel_param_ops uses
sysfs: tightened sysfs permission checks
module: Rework module_addr_{min,max}
module: Use __module_address() for module_address_lookup()
module: Make the mod_tree stuff conditional on PERF_EVENTS || TRACING
module: Optimize __module_address() using a latched RB-tree
rbtree: Implement generic latch_tree
seqlock: Introduce raw_read_seqcount_latch()
...
Pull more block layer patches from Jens Axboe:
"A few later arrivers that I didn't fold into the first pull request,
so we had a chance to run some testing. This contains:
- NVMe:
- Set of fixes from Keith
- 4.4 and earlier gcc build fix from Andrew
- small set of xen-blk{back,front} fixes from Bob Liu.
- warnings fix for bogus inline statement in I_BDEV() from Geert.
- error code fixup for SG_IO ioctl from Paolo Bonzini"
* 'for-linus' of git://git.kernel.dk/linux-block:
drivers/block/nvme-core.c: fix build with gcc-4.4.4
bdi: Remove "inline" keyword from exported I_BDEV() implementation
block: fix bogus EFAULT error from SG_IO ioctl
NVMe: Fix filesystem deadlock on removal
NVMe: Failed controller initialization fixes
NVMe: Unify controller probe and resume
NVMe: Don't use fake status on cancelled command
NVMe: Fix device cleanup on initialization failure
drivers: xen-blkfront: only talk_to_blkback() when in XenbusStateInitialising
xen/block: add multi-page ring support
driver: xen-blkfront: move talk_to_blkback to a more suitable place
drivers: xen-blkback: delay pending_req allocation to connect_ring
rbd_obj_request_create() is called on the main I/O path, so we need to
use GFP_NOIO to make sure allocation doesn't blow back on us. Not all
callers need this, but I'm still hardcoding the flag inside rather than
making it a parameter because a) this is going to stable, and b) those
callers shouldn't really use rbd_obj_request_create() and will be fixed
in the future.
More memory allocation fixes will follow.
Cc: stable@vger.kernel.org # 3.10+
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
4 drivers / enabling modules:
NFIT:
Instantiates an "nvdimm bus" with the core and registers memory devices
(NVDIMMs) enumerated by the ACPI 6.0 NFIT (NVDIMM Firmware Interface
table). After registering NVDIMMs the NFIT driver then registers
"region" devices. A libnvdimm-region defines an access mode and the
boundaries of persistent memory media. A region may span multiple
NVDIMMs that are interleaved by the hardware memory controller. In
turn, a libnvdimm-region can be carved into a "namespace" device and
bound to the PMEM or BLK driver which will attach a Linux block device
(disk) interface to the memory.
PMEM:
Initially merged in v4.1 this driver for contiguous spans of persistent
memory address ranges is re-worked to drive PMEM-namespaces emitted by
the libnvdimm-core. In this update the PMEM driver, on x86, gains the
ability to assert that writes to persistent memory have been flushed all
the way through the caches and buffers in the platform to persistent
media. See memcpy_to_pmem() and wmb_pmem().
BLK:
This new driver enables access to persistent memory media through "Block
Data Windows" as defined by the NFIT. The primary difference of this
driver to PMEM is that only a small window of persistent memory is
mapped into system address space at any given point in time. Per-NVDIMM
windows are reprogrammed at run time, per-I/O, to access different
portions of the media. BLK-mode, by definition, does not support DAX.
BTT:
This is a library, optionally consumed by either PMEM or BLK, that
converts a byte-accessible namespace into a disk with atomic sector
update semantics (prevents sector tearing on crash or power loss). The
sinister aspect of sector tearing is that most applications do not know
they have a atomic sector dependency. At least today's disk's rarely
ever tear sectors and if they do one almost certainly gets a CRC error
on access. NVDIMMs will always tear and always silently. Until an
application is audited to be robust in the presence of sector-tearing
the usage of BTT is recommended.
Thanks to: Ross Zwisler, Jeff Moyer, Vishal Verma, Christoph Hellwig,
Ingo Molnar, Neil Brown, Boaz Harrosh, Robert Elliott, Matthew Wilcox,
Andy Rudoff, Linda Knippers, Toshi Kani, Nicholas Moulin, Rafael
Wysocki, and Bob Moore.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=VtWG
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimm
Pull libnvdimm subsystem from Dan Williams:
"The libnvdimm sub-system introduces, in addition to the
libnvdimm-core, 4 drivers / enabling modules:
NFIT:
Instantiates an "nvdimm bus" with the core and registers memory
devices (NVDIMMs) enumerated by the ACPI 6.0 NFIT (NVDIMM Firmware
Interface table).
After registering NVDIMMs the NFIT driver then registers "region"
devices. A libnvdimm-region defines an access mode and the
boundaries of persistent memory media. A region may span multiple
NVDIMMs that are interleaved by the hardware memory controller. In
turn, a libnvdimm-region can be carved into a "namespace" device and
bound to the PMEM or BLK driver which will attach a Linux block
device (disk) interface to the memory.
PMEM:
Initially merged in v4.1 this driver for contiguous spans of
persistent memory address ranges is re-worked to drive
PMEM-namespaces emitted by the libnvdimm-core.
In this update the PMEM driver, on x86, gains the ability to assert
that writes to persistent memory have been flushed all the way
through the caches and buffers in the platform to persistent media.
See memcpy_to_pmem() and wmb_pmem().
BLK:
This new driver enables access to persistent memory media through
"Block Data Windows" as defined by the NFIT. The primary difference
of this driver to PMEM is that only a small window of persistent
memory is mapped into system address space at any given point in
time.
Per-NVDIMM windows are reprogrammed at run time, per-I/O, to access
different portions of the media. BLK-mode, by definition, does not
support DAX.
BTT:
This is a library, optionally consumed by either PMEM or BLK, that
converts a byte-accessible namespace into a disk with atomic sector
update semantics (prevents sector tearing on crash or power loss).
The sinister aspect of sector tearing is that most applications do
not know they have a atomic sector dependency. At least today's
disk's rarely ever tear sectors and if they do one almost certainly
gets a CRC error on access. NVDIMMs will always tear and always
silently. Until an application is audited to be robust in the
presence of sector-tearing the usage of BTT is recommended.
Thanks to: Ross Zwisler, Jeff Moyer, Vishal Verma, Christoph Hellwig,
Ingo Molnar, Neil Brown, Boaz Harrosh, Robert Elliott, Matthew Wilcox,
Andy Rudoff, Linda Knippers, Toshi Kani, Nicholas Moulin, Rafael
Wysocki, and Bob Moore"
* tag 'libnvdimm-for-4.2' of git://git.kernel.org/pub/scm/linux/kernel/git/djbw/nvdimm: (33 commits)
arch, x86: pmem api for ensuring durability of persistent memory updates
libnvdimm: Add sysfs numa_node to NVDIMM devices
libnvdimm: Set numa_node to NVDIMM devices
acpi: Add acpi_map_pxm_to_online_node()
libnvdimm, nfit: handle unarmed dimms, mark namespaces read-only
pmem: flag pmem block devices as non-rotational
libnvdimm: enable iostat
pmem: make_request cleanups
libnvdimm, pmem: fix up max_hw_sectors
libnvdimm, blk: add support for blk integrity
libnvdimm, btt: add support for blk integrity
fs/block_dev.c: skip rw_page if bdev has integrity
libnvdimm: Non-Volatile Devices
tools/testing/nvdimm: libnvdimm unit test infrastructure
libnvdimm, nfit, nd_blk: driver for BLK-mode access persistent memory
nd_btt: atomic sector updates
libnvdimm: infrastructure for btt devices
libnvdimm: write blk label set
libnvdimm: write pmem label set
libnvdimm: blk labels and namespace instantiation
...
gcc-4.4.4 (and possibly other versions) fail the compile when initializers
are used with anonymous unions. Work around this.
drivers/block/nvme-core.c: In function 'nvme_identify_ctrl':
drivers/block/nvme-core.c:1163: error: unknown field 'identify' specified in initializer
drivers/block/nvme-core.c:1163: warning: missing braces around initializer
drivers/block/nvme-core.c:1163: warning: (near initialization for 'c.<anonymous>')
drivers/block/nvme-core.c:1164: error: unknown field 'identify' specified in initializer
drivers/block/nvme-core.c:1164: warning: excess elements in struct initializer
drivers/block/nvme-core.c:1164: warning: (near initialization for 'c')
...
This patch has no effect on text size with gcc-4.8.2.
Fixes: d29ec8241c ("nvme: submit internal commands through the block layer")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
Move gendisk deletion before controller shutdown so filesystem may sync
dirty pages. Before, this would deadlock trying to allocate requests
on frozen queues that are about to be deleted.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This fixes an infinite device reset loop that may occur on devices that
fail initialization. If the drive fails to become ready for any reason
that does not involve an admin command timeout, the probe task should
assume the drive is unavailable and remove it from the topology. In
the case an admin command times out during device probing, the driver's
existing reset action will handle removing the drive.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This unifies probe and resume so they both may be scheduled in the same
way. This is necessary for error handling that may occur during device
initialization since the task to cleanup the device wouldn't be able to
run if it is blocked on device initialization.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Synchronized commands do different things for timed out commands
vs. controller returned errors.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Don't release block queue and tagging resoureces if the driver never
got them in the first place. This can happen if the controller fails to
become ready, if memory wasn't available to allocate a tagset or admin
queue, or if the resources were released as part of error recovery.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Here's the big char/misc driver pull request for 4.2-rc1.
Lots of mei, extcon, coresight, uio, mic, and other driver updates in
here. Full details in the shortlog. All of these have been in
linux-next for some time with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iEYEABECAAYFAlWNn0gACgkQMUfUDdst+ykCCQCgvdF4F2+Hy9+RATdk22ak1uq1
JDMAoJTf4oyaIEdaiOKfEIWg9MasS42B
=H5wD
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here's the big char/misc driver pull request for 4.2-rc1.
Lots of mei, extcon, coresight, uio, mic, and other driver updates in
here. Full details in the shortlog. All of these have been in
linux-next for some time with no reported problems"
* tag 'char-misc-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (176 commits)
mei: me: wait for power gating exit confirmation
mei: reset flow control on the last client disconnection
MAINTAINERS: mei: add mei_cl_bus.h to maintained file list
misc: sram: sort and clean up included headers
misc: sram: move reserved block logic out of probe function
misc: sram: add private struct device and virt_base members
misc: sram: report correct SRAM pool size
misc: sram: bump error message level on unclean driver unbinding
misc: sram: fix device node reference leak on error
misc: sram: fix enabled clock leak on error path
misc: mic: Fix reported static checker warning
misc: mic: Fix randconfig build error by including errno.h
uio: pruss: Drop depends on ARCH_DAVINCI_DA850 from config
uio: pruss: Add CONFIG_HAS_IOMEM dependence
uio: pruss: Include <linux/sizes.h>
extcon: Redefine the unique id of supported external connectors without 'enum extcon' type
char:xilinx_hwicap:buffer_icap - change 1/0 to true/false for bool type variable in function buffer_icap_set_configuration().
Drivers: hv: vmbus: Allocate ring buffer memory in NUMA aware fashion
parport: check exclusive access before register
w1: use correct lock on error in w1_seq_show()
...
Merge second patchbomb from Andrew Morton:
- most of the rest of MM
- lots of misc things
- procfs updates
- printk feature work
- updates to get_maintainer, MAINTAINERS, checkpatch
- lib/ updates
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (96 commits)
exit,stats: /* obey this comment */
coredump: add __printf attribute to cn_*printf functions
coredump: use from_kuid/kgid when formatting corename
fs/reiserfs: remove unneeded cast
NILFS2: support NFSv2 export
fs/befs/btree.c: remove unneeded initializations
fs/minix: remove unneeded cast
init/do_mounts.c: add create_dev() failure log
kasan: remove duplicate definition of the macro KASAN_FREE_PAGE
fs/efs: femove unneeded cast
checkpatch: emit "NOTE: <types>" message only once after multiple files
checkpatch: emit an error when there's a diff in a changelog
checkpatch: validate MODULE_LICENSE content
checkpatch: add multi-line handling for PREFER_ETHER_ADDR_COPY
checkpatch: suggest using eth_zero_addr() and eth_broadcast_addr()
checkpatch: fix processing of MEMSET issues
checkpatch: suggest using ether_addr_equal*()
checkpatch: avoid NOT_UNIFIED_DIFF errors on cover-letter.patch files
checkpatch: remove local from codespell path
checkpatch: add --showfile to allow input via pipe to show filenames
...
Improvement idea by Marcin Jabrzyk.
comp_algorithm_store() silently accepts any supplied algorithm name,
because zram performs algorithm availability check later, during the
device configuration phase in disksize_store() and emits the following
error:
"zram: Cannot initialise %s compressing backend"
this error line is somewhat generic and, besides, can indicate a failed
attempt to allocate compression backend's working buffers.
add algorithm availability check to comp_algorithm_store():
echo lzz > /sys/block/zram0/comp_algorithm
-bash: echo: write error: Invalid argument
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reported-by: Marcin Jabrzyk <m.jabrzyk@samsung.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Supplied sysfs values sometimes contain new-line symbols (echo vs. echo
-n), which we also copy as a compression algorithm name. it works fine
when we lookup for compression algorithm, because we use sysfs_streq()
which takes care of new line symbols. however, it doesn't look nice when
we print compression algorithm name if zcomp_create() failed:
zram: Cannot initialise LXZ
compressing backend
cut trailing new-line, so the error string will look like
zram: Cannot initialise LXZ compressing backend
we also now can replace sysfs_streq() in zcomp_available_show() with
strcmp().
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
`bool locked' local variable tells us if we should perform
zcomp_strm_release() or not (jumped to `out' label before
zcomp_strm_find() occurred), which is equivalent to `zstrm' being or not
being NULL. remove `locked' and check `zstrm' instead.
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We currently don't support on-demand device creation. The one and only
way to have N zram devices is to specify num_devices module parameter
(default value: 1). IOW if, for some reason, at some point, user wants
to have N + 1 devies he/she must umount all the existing devices, unload
the module, load the module passing num_devices equals to N + 1. And do
this again, if needed.
This patch introduces zram control sysfs class, which has two sysfs
attrs:
- hot_add -- add a new zram device
- hot_remove -- remove a specific (device_id) zram device
hot_add sysfs attr is read-only and has only automatic device id
assignment mode (as requested by Minchan Kim). read operation performed
on this attr creates a new zram device and returns back its device_id or
error status.
Usage example:
# add a new specific zram device
cat /sys/class/zram-control/hot_add
2
# remove a specific zram device
echo 4 > /sys/class/zram-control/hot_remove
Returning zram_add() error code back to user (-ENOMEM in this case)
cat /sys/class/zram-control/hot_add
cat: /sys/class/zram-control/hot_add: Cannot allocate memory
NOTE, there might be users who already depend on the fact that at least
zram0 device gets always created by zram_init(). Preserve this behavior.
[minchan@kernel.org: use zram->claim to avoid lockdep splat]
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[ Original patch from Minchan Kim <minchan@kernel.org> ]
Commit ba6b17d68c ("zram: fix umount-reset_store-mount race
condition") introduced bdev->bd_mutex to protect a race between mount
and reset. At that time, we don't have dynamic zram-add/remove feature
so it was okay.
However, as we introduce dynamic device feature, bd_mutex became
trouble.
CPU 0
echo 1 > /sys/block/zram<id>/reset
-> kernfs->s_active(A)
-> zram:reset_store->bd_mutex(B)
CPU 1
echo <id> > /sys/class/zram/zram-remove
->zram:zram_remove: bd_mutex(B)
-> sysfs_remove_group
-> kernfs->s_active(A)
IOW, AB -> BA deadlock
The reason we are holding bd_mutex for zram_remove is to prevent
any incoming open /dev/zram[0-9]. Otherwise, we could remove zram
others already have opened. But it causes above deadlock problem.
To fix the problem, this patch overrides block_device.open and
it returns -EBUSY if zram asserts he claims zram to reset so any
incoming open will be failed so we don't need to hold bd_mutex
for zram_remove ayn more.
This patch is to prepare for zram-add/remove feature.
[sergey.senozhatsky@gmail.com: simplify reset_store()]
Signed-off-by: Minchan Kim <minchan@kernel.org>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
We don't have meta->tb_lock anymore and use meta table entry bit_spin_lock
instead. update corresponding comment.
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With dynamic device creation/removal (which will be introduced later in
the series) printing num_devices in zram_init() will not make a lot of
sense, as well as printing the number of destroyed devices in
destroy_devices(). Print per-device action (added/removed) in zram_add()
and zram_remove() instead.
Example:
[ 3645.259652] zram: Added device: zram5
[ 3646.152074] zram: Added device: zram6
[ 3650.585012] zram: Removed device: zram5
[ 3655.845584] zram: Added device: zram8
[ 3660.975223] zram: Removed device: zram6
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Limiting the number of zram devices to 32 (default max_num_devices value)
is confusing, let's drop it. A user with 2TB or 4TB of RAM, for example,
can request as many devices as he can handle.
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch looks big, but basically it just moves code blocks.
No functional changes.
Our current code layout looks like a sandwitch.
For example,
a) between read/write handlers, we have update_used_max() helper function:
static int zram_decompress_page
static int zram_bvec_read
static inline void update_used_max
static int zram_bvec_write
static int zram_bvec_rw
b) RW request handlers __zram_make_request/zram_bio_discard are divided by
sysfs attr reset_store() function and corresponding zram_reset_device()
handler:
static void zram_bio_discard
static void zram_reset_device
static ssize_t disksize_store
static ssize_t reset_store
static void __zram_make_request
c) we first a bunch of sysfs read/store functions. then a number of
one-liners, then helper functions, RW functions, sysfs functions, helper
functions again, and so on.
Reorganize layout to be more logically grouped (a brief description,
`cat zram_drv.c | grep static` gives a bigger picture):
-- one-liners: zram_test_flag/etc.
-- helpers: is_partial_io/update_position/etc
-- sysfs attr show/store functions + ZRAM_ATTR_RO() generated stats
show() functions
exception: reset and disksize store functions are required to be after
meta() functions. because we do device create/destroy actions in these
sysfs handlers.
-- "mm" functions: meta get/put, meta alloc/free, page free
static inline bool zram_meta_get
static inline void zram_meta_put
static void zram_meta_free
static struct zram_meta *zram_meta_alloc
static void zram_free_page
-- a block of I/O functions
static int zram_decompress_page
static int zram_bvec_read
static int zram_bvec_write
static void zram_bio_discard
static int zram_bvec_rw
static void __zram_make_request
static void zram_make_request
static void zram_slot_free_notify
static int zram_rw_page
-- device contol: add/remove/init/reset functions (+zram-control class
will sit here)
static int zram_reset_device
static ssize_t reset_store
static ssize_t disksize_store
static int zram_add
static void zram_remove
static int __init zram_init
static void __exit zram_exit
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch makes some preparations for on-demand device add/remove
functionality.
Remove `zram_devices' array and switch to id-to-pointer translation (idr).
idr doesn't bloat zram struct with additional members, f.e. list_head,
yet still provides ability to match the device_id with the device pointer.
No user-space visible changes.
[Julia.Lawall@lip6.fr: return -ENOMEM when `queue' alloc fails]
Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Reported-by: Julia Lawall <Julia.Lawall@lip6.fr>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This config option doesn't provide any usage for zram.
Signed-off-by: Marcin Jabrzyk <m.jabrzyk@samsung.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull cgroup writeback support from Jens Axboe:
"This is the big pull request for adding cgroup writeback support.
This code has been in development for a long time, and it has been
simmering in for-next for a good chunk of this cycle too. This is one
of those problems that has been talked about for at least half a
decade, finally there's a solution and code to go with it.
Also see last weeks writeup on LWN:
http://lwn.net/Articles/648292/"
* 'for-4.2/writeback' of git://git.kernel.dk/linux-block: (85 commits)
writeback, blkio: add documentation for cgroup writeback support
vfs, writeback: replace FS_CGROUP_WRITEBACK with SB_I_CGROUPWB
writeback: do foreign inode detection iff cgroup writeback is enabled
v9fs: fix error handling in v9fs_session_init()
bdi: fix wrong error return value in cgwb_create()
buffer: remove unusued 'ret' variable
writeback: disassociate inodes from dying bdi_writebacks
writeback: implement foreign cgroup inode bdi_writeback switching
writeback: add lockdep annotation to inode_to_wb()
writeback: use unlocked_inode_to_wb transaction in inode_congested()
writeback: implement unlocked_inode_to_wb transaction and use it for stat updates
writeback: implement [locked_]inode_to_wb_and_lock_list()
writeback: implement foreign cgroup inode detection
writeback: make writeback_control track the inode being written back
writeback: relocate wb[_try]_get(), wb_put(), inode_{attach|detach}_wb()
mm: vmscan: disable memcg direct reclaim stalling if cgroup writeback support is in use
writeback: implement memcg writeback domain based throttling
writeback: reset wb_domain->dirty_limit[_tstmp] when memcg domain size changes
writeback: implement memcg wb_domain
writeback: update wb_over_bg_thresh() to use wb_domain aware operations
...
Pull block driver updates from Jens Axboe:
"This contains:
- a few race fixes for null_blk, from Akinobu Mita.
- a series of fixes for mtip32xx, from Asai Thambi and Selvan Mani at
Micron.
- NVMe:
* Fix for missing error return on allocation failure, from Axel
Lin.
* Code consolidation and cleanups from Christoph.
* Memory barrier addition, syncing queue count and queue
pointers. From Jon Derrick.
* Various fixes from Keith, an addition to support user
issue reset from sysfs or ioctl, and automatic namespace
rescan.
* Fix from Matias, avoiding losing some request flags when
marking the request failfast.
- small cleanups and sparse fixups for ps3vram. From Geert
Uytterhoeven and Geoff Lavand.
- s390/dasd dead code removal, from Jarod Wilson.
- a set of fixes and optimizations for loop, from Ming Lei.
- conversion to blkdev_reread_part() of loop, dasd, ndb. From Ming
Lei.
- updates to cciss. From Tomas Henzl"
* 'for-4.2/drivers' of git://git.kernel.dk/linux-block: (44 commits)
mtip32xx: Fix accessing freed memory
block: nvme-scsi: Catch kcalloc failure
NVMe: Fix IO for extended metadata formats
nvme: don't overwrite req->cmd_flags on sync cmd
mtip32xx: increase wait time for hba reset
mtip32xx: fix minor number
mtip32xx: remove unnecessary sleep in mtip_ftl_rebuild_poll()
mtip32xx: fix crash on surprise removal of the drive
mtip32xx: Abort I/O during secure erase operation
mtip32xx: fix incorrectly setting MTIP_DDF_SEC_LOCK_BIT
mtip32xx: remove unused variable 'port->allocated'
mtip32xx: fix rmmod issue
MAINTAINERS: Update ps3vram block driver
block/ps3vram: Remove obsolete reference to MTD
block/ps3vram: Fix sparse warnings
NVMe: Automatic namespace rescan
NVMe: Memory barrier before queue_count is incremented
NVMe: add sysfs and ioctl controller reset
null_blk: restart request processing on completion handler
null_blk: prevent timer handler running on a different CPU where started
...
Pull core block IO update from Jens Axboe:
"Nothing really major in here, mostly a collection of smaller
optimizations and cleanups, mixed with various fixes. In more detail,
this contains:
- Addition of policy specific data to blkcg for block cgroups. From
Arianna Avanzini.
- Various cleanups around command types from Christoph.
- Cleanup of the suspend block I/O path from Christoph.
- Plugging updates from Shaohua and Jeff Moyer, for blk-mq.
- Eliminating atomic inc/dec of both remaining IO count and reference
count in a bio. From me.
- Fixes for SG gap and chunk size support for data-less (discards)
IO, so we can merge these better. From me.
- Small restructuring of blk-mq shared tag support, freeing drivers
from iterating hardware queues. From Keith Busch.
- A few cfq-iosched tweaks, from Tahsin Erdogan and me. Makes the
IOPS mode the default for non-rotational storage"
* 'for-4.2/core' of git://git.kernel.dk/linux-block: (35 commits)
cfq-iosched: fix other locations where blkcg_to_cfqgd() can return NULL
cfq-iosched: fix sysfs oops when attempting to read unconfigured weights
cfq-iosched: move group scheduling functions under ifdef
cfq-iosched: fix the setting of IOPS mode on SSDs
blktrace: Add blktrace.c to BLOCK LAYER in MAINTAINERS file
block, cgroup: implement policy-specific per-blkcg data
block: Make CFQ default to IOPS mode on SSDs
block: add blk_set_queue_dying() to blkdev.h
blk-mq: Shared tag enhancements
block: don't honor chunk sizes for data-less IO
block: only honor SG gap prevention for merges that contain data
block: fix returnvar.cocci warnings
block, dm: don't copy bios for request clones
block: remove management of bi_remaining when restoring original bi_end_io
block: replace trylock with mutex_lock in blkdev_reread_part()
block: export blkdev_reread_part() and __blkdev_reread_part()
suspend: simplify block I/O handling
block: collapse bio bit space
block: remove unused BIO_RW_BLOCK and BIO_EOF flags
block: remove BIO_EOPNOTSUPP
...
nr_requests (/sys/block/rbd<id>/queue/nr_requests) is pretty much
irrelevant in blk-mq case because each driver sets its own max depth
that it can handle and that's the number of tags that gets preallocated
on setup. Users can't increase queue depth beyond that value via
writing to nr_requests.
For rbd we are happy with the default BLKDEV_MAX_RQ (128) for most
cases but we want to give users the opportunity to increase it.
Introduce a new per-device queue_depth option to do just that:
$ sudo rbd map -o queue_depth=1024 ...
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
The default queue_limits::max_segments value (BLK_MAX_SEGMENTS = 128)
unnecessarily limits bio sizes to 512k (assuming 4k pages). rbd, being
a virtual block device, doesn't have any restrictions on the number of
physical segments, so bump max_segments to max_hw_sectors, in theory
allowing a sector per segment (although the only case this matters that
I can think of is some readv/writev style thing). In practice this is
going to give us 1M bios - the number of segments in a bio is limited
in bio_get_nr_vecs() by BIO_MAX_PAGES = 256.
Note that this doesn't result in any improvement on a typical direct
sequential test. This is because on a box with a not too badly
fragmented memory the default BLK_MAX_SEGMENTS is enough to see nice
rbd object size sized requests. The only difference is the size of
bios being merged - 512k vs 1M for something like
$ dd if=/dev/zero of=/dev/rbd0 oflag=direct bs=$RBD_OBJ_SIZE
$ dd if=/dev/rbd0 iflag=direct of=/dev/null bs=$RBD_OBJ_SIZE
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
As part of unmap sequence, kernel client has to talk to the OSDs to
teardown watch on the header object. If none of the OSDs are available
it would hang forever, until interrupted by a signal - when that
happens we follow through with the rest of unmap procedure (i.e.
unregister the device and put all the data structures) and the unmap is
still considired successful (rbd cli tool exits with 0). The watch on
the userspace side should eventually timeout so that's fine.
This isn't very nice, because various userspace tools (pacemaker rbd
resource agent, for example) then have to worry about setting up their
own timeouts. Timeout it with mount_timeout (60 seconds by default).
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Sage Weil <sage@redhat.com>
There are currently three libceph-level timeouts that the user can
specify on mount: mount_timeout, osd_idle_ttl and osdkeepalive. All of
these are in seconds and no checking is done on user input: negative
values are accepted, we multiply them all by HZ which may or may not
overflow, arbitrarily large jiffies then get added together, etc.
There is also a bug in the way mount_timeout=0 is handled. It's
supposed to mean "infinite timeout", but that's not how wait.h APIs
treat it and so __ceph_open_session() for example will busy loop
without much chance of being interrupted if none of ceph-mons are
there.
Fix all this by verifying user input, storing timeouts capped by
msecs_to_jiffies() in jiffies and using the new ceph_timeout_jiffies()
helper for all user-specified waits to handle infinite timeouts
correctly.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Prepare the pmem driver to consume PMEM namespaces emitted by regions of
an nvdimm_bus instance. No functional change.
Acked-by: Christoph Hellwig <hch@lst.de>
Tested-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pull networking updates from David Miller:
1) Add TX fast path in mac80211, from Johannes Berg.
2) Add TSO/GRO support to ibmveth, from Thomas Falcon
3) Move away from cached routes in ipv6, just like ipv4, from Martin
KaFai Lau.
4) Lots of new rhashtable tests, from Thomas Graf.
5) Run ingress qdisc lockless, from Alexei Starovoitov.
6) Allow servers to fetch TCP packet headers for SYN packets of new
connections, for fingerprinting. From Eric Dumazet.
7) Add mode parameter to pktgen, for testing receive. From Alexei
Starovoitov.
8) Cache access optimizations via simplifications of build_skb(), from
Alexander Duyck.
9) Move page frag allocator under mm/, also from Alexander.
10) Add xmit_more support to hv_netvsc, from KY Srinivasan.
11) Add a counter guard in case we try to perform endless reclassify
loops in the packet scheduler.
12) Extern flow dissector to be programmable and use it in new "Flower"
classifier. From Jiri Pirko.
13) AF_PACKET fanout rollover fixes, performance improvements, and new
statistics. From Willem de Bruijn.
14) Add netdev driver for GENEVE tunnels, from John W Linville.
15) Add ingress netfilter hooks and filtering, from Pablo Neira Ayuso.
16) Fix handling of epoll edge triggers in TCP, from Eric Dumazet.
17) Add an ECN retry fallback for the initial TCP handshake, from Daniel
Borkmann.
18) Add tail call support to BPF, from Alexei Starovoitov.
19) Add several pktgen helper scripts, from Jesper Dangaard Brouer.
20) Add zerocopy support to AF_UNIX, from Hannes Frederic Sowa.
21) Favor even port numbers for allocation to connect() requests, and
odd port numbers for bind(0), in an effort to help avoid
ip_local_port_range exhaustion. From Eric Dumazet.
22) Add Cavium ThunderX driver, from Sunil Goutham.
23) Allow bpf programs to access skb_iif and dev->ifindex SKB metadata,
from Alexei Starovoitov.
24) Add support for T6 chips in cxgb4vf driver, from Hariprasad Shenai.
25) Double TCP Small Queues default to 256K to accomodate situations
like the XEN driver and wireless aggregation. From Wei Liu.
26) Add more entropy inputs to flow dissector, from Tom Herbert.
27) Add CDG congestion control algorithm to TCP, from Kenneth Klette
Jonassen.
28) Convert ipset over to RCU locking, from Jozsef Kadlecsik.
29) Track and act upon link status of ipv4 route nexthops, from Andy
Gospodarek.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1670 commits)
bridge: vlan: flush the dynamically learned entries on port vlan delete
bridge: multicast: add a comment to br_port_state_selection about blocking state
net: inet_diag: export IPV6_V6ONLY sockopt
stmmac: troubleshoot unexpected bits in des0 & des1
net: ipv4 sysctl option to ignore routes when nexthop link is down
net: track link-status of ipv4 nexthops
net: switchdev: ignore unsupported bridge flags
net: Cavium: Fix MAC address setting in shutdown state
drivers: net: xgene: fix for ACPI support without ACPI
ip: report the original address of ICMP messages
net/mlx5e: Prefetch skb data on RX
net/mlx5e: Pop cq outside mlx5e_get_cqe
net/mlx5e: Remove mlx5e_cq.sqrq back-pointer
net/mlx5e: Remove extra spaces
net/mlx5e: Avoid TX CQE generation if more xmit packets expected
net/mlx5e: Avoid redundant dev_kfree_skb() upon NOP completion
net/mlx5e: Remove re-assignment of wq type in mlx5e_enable_rq()
net/mlx5e: Use skb_shinfo(skb)->gso_segs rather than counting them
net/mlx5e: Static mapping of netdev priv resources to/from netdev TX queues
net/mlx4_en: Use HW counters for rx/tx bytes/packets in PF device
...
In mtip_pci_remove(), driver data 'dd' is accessed after freeing it. This
is a residue of SRSI code cleanup in the patch 016a41c38821 "mtip32xx: fix
crash on surprise removal of the drive". Removed the bit flags
MTIP_DDF_REMOVE_DONE_BIT and MTIP_PF_SR_CLEANUP_BIT.
Reported-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Vignesh Gunasekaran <vgunasekaran@micron.com>
Signed-off-by: Selvan Mani <smani@micron.com>
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This is the usual grab bag of driver updates (lpfc, hpsa,
megaraid_sas, cxgbi, be2iscsi) plus an assortment of minor updates.
There are also one new driver: the Cisco snic; the advansys driver has
been rewritten to get rid of the warning about converting it to the
DMA API, the tape statistics patch got in and finally, there's a
resuffle of SCSI header files to separate more cleanly initiator from
target mode (and better share the common definitions).
Signed-off-by: James Bottomley <JBottomley@Odin.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABAgAGBQJViKWdAAoJEDeqqVYsXL0MAr8IAMmlA6HBVjMJJFCEOY9corHj
e70MNQa7LUgf+JCdOtzGcvHXTiFFd4IHZAwXUJAnsC4IU2QWEfi1bjUTErlqBIGk
LoZlXXpEHnFpmWot3OluOzzcGcxede8rVgPiKWVVdojIngBC2+LL/i2vPCJ84ri9
WCVlk6KBvWZXuU6JuOKAb2FO9HOX7Q61wuKAMast2Qc6RNc2ksgc7VbstsITqzZ9
FVEsjmQ5lqUj+xdxBpiUOdUpc22IJ4VcpBgQ2HrThvg6vf4aq937RJ/g4vi/g0SU
Utk0a3bUw1H/WnYAfJVFx83nVEsS/954Z7/ERDg1sjlfLYwQtQnpov0XIbPIbZU=
=k9IT
-----END PGP SIGNATURE-----
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley:
"This is the usual grab bag of driver updates (lpfc, hpsa,
megaraid_sas, cxgbi, be2iscsi) plus an assortment of minor updates.
There is also one new driver: the Cisco snic. The advansys driver has
been rewritten to get rid of the warning about converting it to the
DMA API, the tape statistics patch got in and finally, there's a
resuffle of SCSI header files to separate more cleanly initiator from
target mode (and better share the common definitions)"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (156 commits)
snic: driver for Cisco SCSI HBA
qla2xxx: Fix indentation
qla2xxx: Comment out unreachable code
fusion: remove dead MTRR code
advansys: fix compilation errors and warnings when CONFIG_PCI is not set
mptsas: fix depth param in scsi_track_queue_full
megaraid: fix irq setup process regression
lpfc: Update version to 10.7.0.0 for upstream patch set.
lpfc: Fix to drop PLOGIs from fabric node till LOGO processing completes
lpfc: Fix scsi task management error message.
lpfc: Fix cq_id masking problem.
lpfc: Fix scsi prep dma buf error.
lpfc: Add support for using block multi-queue
lpfc: Devices are not discovered during takeaway/giveback testing
lpfc: Fix vport deletion failure.
lpfc: Check for active portpeerbeacon.
lpfc: Update driver version for upstream patch set 10.6.0.1.
lpfc: Change buffer pool empty message to miscellaneous category
lpfc: Fix incorrect log message reported for empty FCF record.
lpfc: Fix rport leak.
...
Pull x86 core updates from Ingo Molnar:
"There were so many changes in the x86/asm, x86/apic and x86/mm topics
in this cycle that the topical separation of -tip broke down somewhat -
so the result is a more traditional architecture pull request,
collected into the 'x86/core' topic.
The topics were still maintained separately as far as possible, so
bisectability and conceptual separation should still be pretty good -
but there were a handful of merge points to avoid excessive
dependencies (and conflicts) that would have been poorly tested in the
end.
The next cycle will hopefully be much more quiet (or at least will
have fewer dependencies).
The main changes in this cycle were:
* x86/apic changes, with related IRQ core changes: (Jiang Liu, Thomas
Gleixner)
- This is the second and most intrusive part of changes to the x86
interrupt handling - full conversion to hierarchical interrupt
domains:
[IOAPIC domain] -----
|
[MSI domain] --------[Remapping domain] ----- [ Vector domain ]
| (optional) |
[HPET MSI domain] ----- |
|
[DMAR domain] -----------------------------
|
[Legacy domain] -----------------------------
This now reflects the actual hardware and allowed us to distangle
the domain specific code from the underlying parent domain, which
can be optional in the case of interrupt remapping. It's a clear
separation of functionality and removes quite some duct tape
constructs which plugged the remap code between ioapic/msi/hpet
and the vector management.
- Intel IOMMU IRQ remapping enhancements, to allow direct interrupt
injection into guests (Feng Wu)
* x86/asm changes:
- Tons of cleanups and small speedups, micro-optimizations. This
is in preparation to move a good chunk of the low level entry
code from assembly to C code (Denys Vlasenko, Andy Lutomirski,
Brian Gerst)
- Moved all system entry related code to a new home under
arch/x86/entry/ (Ingo Molnar)
- Removal of the fragile and ugly CFI dwarf debuginfo annotations.
Conversion to C will reintroduce many of them - but meanwhile
they are only getting in the way, and the upstream kernel does
not rely on them (Ingo Molnar)
- NOP handling refinements. (Borislav Petkov)
* x86/mm changes:
- Big PAT and MTRR rework: making the code more robust and
preparing to phase out exposing direct MTRR interfaces to drivers -
in favor of using PAT driven interfaces (Toshi Kani, Luis R
Rodriguez, Borislav Petkov)
- New ioremap_wt()/set_memory_wt() interfaces to support
Write-Through cached memory mappings. This is especially
important for good performance on NVDIMM hardware (Toshi Kani)
* x86/ras changes:
- Add support for deferred errors on AMD (Aravind Gopalakrishnan)
This is an important RAS feature which adds hardware support for
poisoned data. That means roughly that the hardware marks data
which it has detected as corrupted but wasn't able to correct, as
poisoned data and raises an APIC interrupt to signal that in the
form of a deferred error. It is the OS's responsibility then to
take proper recovery action and thus prolonge system lifetime as
far as possible.
- Add support for Intel "Local MCE"s: upcoming CPUs will support
CPU-local MCE interrupts, as opposed to the traditional system-
wide broadcasted MCE interrupts (Ashok Raj)
- Misc cleanups (Borislav Petkov)
* x86/platform changes:
- Intel Atom SoC updates
... and lots of other cleanups, fixlets and other changes - see the
shortlog and the Git log for details"
* 'x86-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (222 commits)
x86/hpet: Use proper hpet device number for MSI allocation
x86/hpet: Check for irq==0 when allocating hpet MSI interrupts
x86/mm/pat, drivers/infiniband/ipath: Use arch_phys_wc_add() and require PAT disabled
x86/mm/pat, drivers/media/ivtv: Use arch_phys_wc_add() and require PAT disabled
x86/platform/intel/baytrail: Add comments about why we disabled HPET on Baytrail
genirq: Prevent crash in irq_move_irq()
genirq: Enhance irq_data_to_desc() to support hierarchy irqdomain
iommu, x86: Properly handle posted interrupts for IOMMU hotplug
iommu, x86: Provide irq_remapping_cap() interface
iommu, x86: Setup Posted-Interrupts capability for Intel iommu
iommu, x86: Add cap_pi_support() to detect VT-d PI capability
iommu, x86: Avoid migrating VT-d posted interrupts
iommu, x86: Save the mode (posted or remapped) of an IRTE
iommu, x86: Implement irq_set_vcpu_affinity for intel_ir_chip
iommu: dmar: Provide helper to copy shared irte fields
iommu: dmar: Extend struct irte for VT-d Posted-Interrupts
iommu: Add new member capability to struct irq_remap_ops
x86/asm/entry/64: Disentangle error_entry/exit gsbase/ebx/usermode code
x86/asm/entry/32: Shorten __audit_syscall_entry() args preparation
x86/asm/entry/32: Explain reloading of registers after __audit_syscall_entry()
...
Patch 69b91ede5c
"drivers: xen-blkback: delay pending_req allocation to connect_ring"
exposed an problem that Xen blkfront has. There is a race
with XenStored and the drivers such that we can see two:
vbd vbd-268440320: blkfront:blkback_changed to state 2.
vbd vbd-268440320: blkfront:blkback_changed to state 2.
vbd vbd-268440320: blkfront:blkback_changed to state 4.
state changes to XenbusStateInitWait ('2'). The end result is that
blkback_changed() receives two notify and calls twice setup_blkring().
While the backend driver may only get the first setup_blkring() which is
wrong and reads out-dated (or reads them as they are being updated
with new ring-ref values).
The end result is that the ring ends up being incorrectly set.
The other drivers in the tree have such checks already in.
Reported-and-Tested-by: Robert Butera <robert.butera@oracle.com>
Signed-off-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
res variable was initialized to -ENOMEM, but it's override by
nvme_trans_copy_from_user(). So current code returns 0 if kcalloc fails.
Fix it to return proper error code.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This fixes io submit ioctl handling when using extended metadata
formats. When these formats are used, the user provides a single virtually
contiguous buffer containing both the block and metadata interleaved,
so the metadata size needs to be added to the total length and not mapped
as a separate transfer.
The command is also driver generated, so this patch does not enforce
blk-integrity extensions provide the metadata buffer.
Reported-by: Marcin Dziegielewski <marcin.dziegielewski@intel.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
In __nvme_submit_sync_cmd, the request direction is overwritten when
the REQ_FAILFAST_DRIVER flag is set.
Signed-off-by: Matias Bjørling <m@bjorling.me>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Fixes: 75619bfa90 ("NVMe: End sync requests immediately on failure")
Signed-off-by: Jens Axboe <axboe@fb.com>
Make the code less confusing to read now that Linux may not have the
same page size as Xen.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Since commit b764915 "xen-blkfront: use a different scatterlist for each
request", biovec has been replaced by scatterlist when copying back the
data during a completion request.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
In LUN failure conditions, device takes longer time to complete the hba reset.
Increased wait time from 1 second to 10 seconds.
Signed-off-by: Sam Bradshaw <sbradshaw@micron.com>
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
When a device is surprise removed and inserted, it is assigned a new minor
number because driver use multiples of 'instance' number. Modified to use the
multiples of 'index' for minor number.
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
pci and block layers have changed a lot compared to when SRSI support was added.
Given the current state of pci and block layers, this driver do not have to do
any specific handling.
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Selvan Mani <smani@micron.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Currently I/Os are being queued when secure erase operation starts, and issue
them after the operation completes. As all data will be gone when the operation
completes, any queued I/O doesn't make sense. Hence, abort I/O (return -ENODATA)
as soon as the driver receives.
Signed-off-by: Selvan Mani <smani@micron.com>
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
put_disk() need to be called after del_gendisk() to free the disk object structure.
Signed-off-by: Selvan Mani <smani@micron.com>
Signed-off-by: Asai Thambi S P <asamymuthupa@micron.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Pull block layer fixes from Jens Axboe:
"Remember about a week ago when I sent the last pull request for 4.1?
Well, I lied. Now, I don't want to shift the blame, but Dan, Ming,
and Richard made a liar out of me.
Here are three small patches that should go into 4.1. More
specifically, this pull request contains:
- A Kconfig dependency for the pmem block driver, so it can't be
selected if HAS_IOMEM isn't availble. From Richard Weinberger.
- A fix for genhd, making the ext_devt_lock softirq safe. This makes
lockdep happier, since we also end up grabbing this lock on release
off the softirq path. From Dan Williams.
- A blk-mq software queue release fix from Ming Lei.
Last two are headed to stable, first fixes an issue introduced in this
cycle"
* 'for-linus' of git://git.kernel.dk/linux-block:
block: pmem: Add dependency on HAS_IOMEM
block: fix ext_dev_lock lockdep report
blk-mq: free hctx->ctxs in queue's release handler
Not all architectures have io memory.
Fixes:
drivers/block/pmem.c: In function ‘pmem_alloc’:
drivers/block/pmem.c:146:2: error: implicit declaration of function ‘ioremap_nocache’ [-Werror=implicit-function-declaration]
pmem->virt_addr = ioremap_nocache(pmem->phys_addr, pmem->size);
^
drivers/block/pmem.c:146:18: warning: assignment makes pointer from integer without a cast [enabled by default]
pmem->virt_addr = ioremap_nocache(pmem->phys_addr, pmem->size);
^
drivers/block/pmem.c:182:2: error: implicit declaration of function ‘iounmap’ [-Werror=implicit-function-declaration]
iounmap(pmem->virt_addr);
^
Signed-off-by: Richard Weinberger <richard@nod.at>
Reviewed-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Clear zram disk io accounting when resetting the zram device. Otherwise
the residual io accounting stat will affect the diskstat in the next
zram active cycle.
Signed-off-by: Weijie Yang <weijie.yang@samsung.com>
Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The ps3vram driver is a plain block device driver since commit
f507cd2203 ("ps3/block: Replace mtd/ps3vram
by block/ps3vram").
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Geoff Levand <geoff@infradead.org>
Acked-by: Jim Paris <jim@jtan.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The pmem driver maps NVDIMM uncacheable so that we don't lose
data which hasn't reached non-volatile storage in the case of a
crash. Change this to Write-Through mode which provides uncached
writes but cached reads, thus improving read performance.
Signed-off-by: Toshi Kani <toshi.kani@hp.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dan Williams <dan.j.williams@intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Elliott@hp.com
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Luis R. Rodriguez <mcgrof@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: arnd@arndb.de
Cc: hch@lst.de
Cc: hmh@hmh.eng.br
Cc: jgross@suse.com
Cc: konrad.wilk@oracle.com
Cc: linux-mm <linux-mm@kvack.org>
Cc: linux-nvdimm@lists.01.org
Cc: stefan.bader@canonical.com
Cc: yigal@plexistor.com
Link: http://lkml.kernel.org/r/1433436928-31903-14-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Extend xen/block to support multi-page ring, so that more requests can be
issued by using more than one pages as the request ring between blkfront
and backend.
As a result, the performance can get improved significantly.
We got some impressive improvements on our highend iscsi storage cluster
backend. If using 64 pages as the ring, the IOPS increased about 15 times
for the throughput testing and above doubled for the latency testing.
The reason was the limit on outstanding requests is 32 if use only one-page
ring, but in our case the iscsi lun was spread across about 100 physical
drives, 32 was really not enough to keep them busy.
Changes in v2:
- Rebased to 4.0-rc6.
- Document on how multi-page ring feature working to linux io/blkif.h.
Changes in v3:
- Remove changes to linux io/blkif.h and follow the protocol defined
in io/blkif.h of XEN tree.
- Rebased to 4.1-rc3
Changes in v4:
- Turn to use 'ring-page-order' and 'max-ring-page-order'.
- A few comments from Roger.
Changes in v5:
- Clarify with 4k granularity to comment
- Address more comments from Roger
Signed-off-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
The major responsibility of talk_to_blkback() is allocate and initialize
the request ring and write the ring info to xenstore.
But this work should be done after backend entered 'XenbusStateInitWait' as
defined in the protocol file.
See xen/include/public/io/blkif.h in XEN git tree:
Front Back
================================= =====================================
XenbusStateInitialising XenbusStateInitialising
o Query virtual device o Query backend device identification
properties. data.
o Setup OS device instance. o Open and validate backend device.
o Publish backend features and
transport parameters.
|
|
V
XenbusStateInitWait
o Query backend features and
transport parameters.
o Allocate and initialize the
request ring.
There is no problem with this yet, but it is an violation of the design and
furthermore it would not allow frontend/backend to negotiate 'multi-page'
and 'multi-queue' features.
Changes in v2:
- Re-write the commit message to be more clear.
Signed-off-by: Bob Liu <bob.liu@oracle.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
This is a pre-patch for multi-page ring feature.
In connect_ring, we can know exactly how many pages are used for the shared
ring, delay pending_req allocation here so that we won't waste too much memory.
Signed-off-by: Bob Liu <bob.liu@oracle.com>
Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Namespaces may be dynamically allocated and deleted or attached and
detached. This has the driver rescan the device for namespace changes
after each device reset or namespace change asynchronous event.
There could potentially be many detached namespaces that we don't want
polluting /dev/ with unusable block handles, so this will delete disks
if the namespace is not active as indicated by the response from identify
namespace. This also skips adding the disk if no capacity is provisioned
to the namespace in the first place.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Protects against reordering and/or preempting which would allow the
kthread to access the queue descriptor before it is set up
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Acked-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
We need the ability to perform an nvme controller reset as discussed on
the mailing list thread:
http://lists.infradead.org/pipermail/linux-nvme/2015-March/001585.html
This adds a sysfs entry that when written to will reset perform an NVMe
controller reset if the controller was successfully initialized in the
first place.
This also adds locking around resetting the device in the async probe
method so the driver can't schedule two resets.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Cc: Brandon Schultz <brandon.schulz@hgst.com>
Cc: David Sariel <david.sariel@pmcs.com>
Updated by Jens to:
1) Merge this with the ioctl reset patch from David Sariel. The ioctl
path now shares the reset code from the sysfs path.
2) Don't flush work if we fail issuing the reset.
Signed-off-by: Jens Axboe <axboe@fb.com>
With the planned cgroup writeback support, backing-dev related
declarations will be more widely used across block and cgroup;
unfortunately, including backing-dev.h from include/linux/blkdev.h
makes cyclic include dependency quite likely.
This patch separates out backing-dev-defs.h which only has the
essential definitions and updates blkdev.h to include it. c files
which need access to more backing-dev details now include
backing-dev.h directly. This takes backing-dev.h off the common
include dependency chain making it a lot easier to use it across block
and cgroup.
v2: fs/fat build failure fixed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Jens Axboe <axboe@fb.com>
Currently, a bdi (backing_dev_info) embeds single wb (bdi_writeback)
and the role of the separation is unclear. For cgroup support for
writeback IOs, a bdi will be updated to host multiple wb's where each
wb serves writeback IOs of a different cgroup on the bdi. To achieve
that, a wb should carry all states necessary for servicing writeback
IOs for a cgroup independently.
This patch moves bdi->state into wb.
* enum bdi_state is renamed to wb_state and the prefix of all enums is
changed from BDI_ to WB_.
* Explicit zeroing of bdi->state is removed without adding zeoring of
wb->state as the whole data structure is zeroed on init anyway.
* As there's still only one bdi_writeback per backing_dev_info, all
uses of bdi->state are mechanically replaced with bdi->wb.state
introducing no behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: drbd-dev@lists.linbit.com
Cc: Neil Brown <neilb@suse.de>
Cc: Alasdair Kergon <agk@redhat.com>
Cc: Mike Snitzer <snitzer@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
When irqmode=2 (IRQ completion handler is timer) and queue_mode=1
(Block interface to use is rq), the completion handler should restart
request handling for any pending requests on a queue because request
processing stops when the number of commands are queued more than
hw_queue_depth (null_rq_prep_fn returns BLKPREP_DEFER).
Without this change, the following command cannot finish.
# modprobe null_blk irqmode=2 queue_mode=1 hw_queue_depth=1
# fio --name=t --rw=read --size=1g --direct=1 \
--ioengine=libaio --iodepth=64 --filename=/dev/nullb0
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Jens Axboe <axboe@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
When irqmode=2 (IRQ completion handler is timer), timer handler should
be called on the same CPU where the timer has been started.
Since completion_queues are per-cpu and the completion handler only
touches completion_queue for local CPU, we need to prevent the handler
from running on a different CPU where the timer has been started.
Otherwise, the IO cannot be completed until another completion handler
is executed on that CPU.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Jens Axboe <axboe@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The driver needs to track shared tags to support multiple namespaces
that may be dynamically allocated or deleted. Relying on the first
request_queue's hctx's is not appropriate as we cannot clear outstanding
tags for all namespaces using this handle, nor can the driver easily track
all request_queue's hctx as namespaces are attached/detached. Instead,
this patch uses the nvme_dev's tagset to get the shared tag resources
instead of through a request_queue hctx.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
'0' is now used as the default cmd_per_lun value,
so there's no need to explicitly set it to '1' in the
host template.
Signed-off-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Modify paride driver to use the new parallel port device model.
Tested-by: Alan Cox <gnomes@lxorguk.ukuu.org.uk>
Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The hpsa driver carries a more recent version,
copy the table from there.
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Acked-by: Don Brace <Don.Brace@pmcs.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
and devices not supported by this driver from unresettable list
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Acked-by: Don Brace <Don.Brace@pmcs.com>
Signed-off-by: James Bottomley <JBottomley@Odin.com>
Do not retry failed sync commands so the original status may be seen
without issuing unnecessary retries.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
A recent change to the ioctl handling caused a new harmless
warning in the NVMe driver on all 32-bit machines:
drivers/block/nvme-core.c: In function 'nvme_submit_io':
drivers/block/nvme-core.c:1794:29: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
In order to shup up that warning, this introduces a new
temporary variable that uses a double cast to extract
the pointer from an __u64 structure member.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Fixes: a67a95134f ("NVMe: Meta data handling through submit io ioctl")
Acked-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Most code already uses consts for the struct kernel_param_ops,
sweep the kernel for the last offending stragglers. Other than
include/linux/moduleparam.h and kernel/params.c all other changes
were generated with the following Coccinelle SmPL patch. Merge
conflicts between trees can be handled with Coccinelle.
In the future git could get Coccinelle merge support to deal with
patch --> fail --> grammar --> Coccinelle --> new patch conflicts
automatically for us on patches where the grammar is available and
the patch is of high confidence. Consider this a feature request.
Test compiled on x86_64 against:
* allnoconfig
* allmodconfig
* allyesconfig
@ const_found @
identifier ops;
@@
const struct kernel_param_ops ops = {
};
@ const_not_found depends on !const_found @
identifier ops;
@@
-struct kernel_param_ops ops = {
+const struct kernel_param_ops ops = {
};
Generated-by: Coccinelle SmPL
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Junio C Hamano <gitster@pobox.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: cocci@systeme.lip6.fr
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Conflicts:
drivers/net/ethernet/cadence/macb.c
drivers/net/phy/phy.c
include/linux/skbuff.h
net/ipv4/tcp.c
net/switchdev/switchdev.c
Switchdev was a case of RTNH_H_{EXTERNAL --> OFFLOAD}
renaming overlapping with net-next changes of various
sorts.
phy.c was a case of two changes, one adding a local
variable to a function whilst the second was removing
one.
tcp.c overlapped a deadlock fix with the addition of new tcp_info
statistic values.
macb.c involved the addition of two zyncq device entries.
skbuff.h involved adding back ipv4_daddr to nf_bridge_info
whilst net-next changes put two other existing members of
that struct into a union.
Signed-off-by: David S. Miller <davem@davemloft.net>
Replaces req->sense_len usage, which is not owned by the LLD, to
req->special to contain the command result for driver created commands,
and sets the result unconditionally on completion.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@fb.com>
Fixes: d29ec8241c ("nvme: submit internal commands through the block layer")
Signed-off-by: Jens Axboe <axboe@fb.com>
Use block layer queues with an internal cmd_type to submit internally
generated NVMe commands. This both simplifies the code a lot and allow
for a better structure. For example now the LighNVM code can construct
commands without knowing the details of the underlying I/O descriptors.
Or a future NVMe over network target could inject commands, as well as
could the SCSI translation and ioctl code be reused for such a beast.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
NVMe device always support the FUA bit, and the SCSI translations
accepts the DPO bit, which doesn't have much of a meaning for us.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Erorr handling for the scsi translation was completely broken, as there
were two different positive error number spaces overlapping. Fix this
up by removing one of them, and centralizing the generation of the other
positive values in a single place. Also fix up a few places that didn't
handle the NVMe error codes properly.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
This function handles two totally different opcodes, so split it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Most users want the generic device, so store that in struct nvme_dev
instead of the pci_dev. This also happens to be a nice step towards
making some code reusable for non-PCI transports.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Note that we keep the unused timeout argument, but allow callers to
pass 0 instead of a timeout if they want the default. This will allow
adding a timeout to the pass through path later on.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
gcc, righfully, complains:
drivers/block/loop.c:1369:1: warning: label 'out' defined but not used [-Wunused-label]
Kill it.
Signed-off-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
loop_clr_fd() can be run piggyback with lo_release(), and
under this situation, reread partition may always fail because
bd_mutex has been held already.
This patch detects the situation by the reference count, and
call __blkdev_reread_part() to avoid acquiring the lock again.
In the meantime, this patch switches to new kernel APIs
of blkdev_reread_part() and __blkdev_reread_part().
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The lo_ctl_mutex is held for running all ioctl handlers, and
in some ioctl handlers, ioctl_by_bdev(BLKRRPART) is called for
rereading partitions, which requires bd_mutex.
So it is easy to cause failure because trylock(bd_mutex) may
fail inside blkdev_reread_part(), and follows the lock context:
blkid or other application:
->open()
->mutex_lock(bd_mutex)
->lo_open()
->mutex_lock(lo_ctl_mutex)
losetup(set fd ioctl):
->mutex_lock(lo_ctl_mutex)
->ioctl_by_bdev(BLKRRPART)
->trylock(bd_mutex)
This patch trys to eliminate the ABBA lock dependency by removing
lo_ctl_mutext in lo_open() with the following approach:
1) make lo_refcnt as atomic_t and avoid acquiring lo_ctl_mutex in lo_open():
- for open vs. add/del loop, no any problem because of loop_index_mutex
- freeze request queue during clr_fd, so I/O can't come until
clearing fd is completed, like the effect of holding lo_ctl_mutex
in lo_open
- both open() and release() have been serialized by bd_mutex already
2) don't hold lo_ctl_mutex for decreasing/checking lo_refcnt in
lo_release(), then lo_ctl_mutex is only required for the last release.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Tested-by: Jarod Wilson <jarod@redhat.com>
Acked-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The queue_lock needs to be taken with irqs disabled. This is mostly
due to the old pre blk-mq usage pattern, but we've also picked it up
in most of the few places where we use the queue_lock with blk-mq.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
The hpsa driver carries a more recent version,
copy the table from there.
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
and devices not supported by this driver from unresettable list
Signed-off-by: Tomas Henzl <thenzl@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Four minor merge conflicts:
1) qca_spi.c renamed the local variable used for the SPI device
from spi_device to spi, meanwhile the spi_set_drvdata() call
got moved further up in the probe function.
2) Two changes were both adding new members to codel params
structure, and thus we had overlapping changes to the
initializer function.
3) 'net' was making a fix to sk_release_kernel() which is
completely removed in 'net-next'.
4) In net_namespace.c, the rtnl_net_fill() call for GET operations
had the command value fixed, meanwhile 'net-next' adjusted the
argument signature a bit.
This also matches example merge resolutions posted by Stephen
Rothwell over the past two days.
Signed-off-by: David S. Miller <davem@davemloft.net>
If userspace asks for an INQUIRY buffer smaller than 36 bytes, the SCSI
translation layer will happily write past the end of the INQUIRY buffer
allocation.
This is fairly easily reproducible by running the libiscsi test
suite and then starting an xfstests run.
Fixes: 4f1982 ("NVMe: Update SCSI Inquiry VPD 83h translation")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
This is long overdue, and is part of cleaning up how we allocate kernel
sockets that don't reference count struct net.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull block fixes from Jens Axboe:
"A collection of fixes since the merge window;
- fix for a double elevator module release, from Chao Yu. Ancient bug.
- the splice() MORE flag fix from Christophe Leroy.
- a fix for NVMe, fixing a patch that went in in the merge window.
From Keith.
- two fixes for blk-mq CPU hotplug handling, from Ming Lei.
- bdi vs blockdev lifetime fix from Neil Brown, fixing and oops in md.
- two blk-mq fixes from Shaohua, fixing a race on queue stop and a
bad merge issue with FUA writes.
- division-by-zero fix for writeback from Tejun.
- a block bounce page accounting fix, making sure we inc/dec after
bouncing so that pre/post IO pages match up. From Wang YanQing"
* 'for-linus' of git://git.kernel.dk/linux-block:
splice: sendfile() at once fails for big files
blk-mq: don't lose requests if a stopped queue restarts
blk-mq: fix FUA request hang
block: destroy bdi before blockdev is unregistered.
block:bounce: fix call inc_|dec_zone_page_state on different pages confuse value of NR_BOUNCE
elevator: fix double release of elevator module
writeback: use |1 instead of +1 to protect against div by zero
blk-mq: fix CPU hotplug handling
blk-mq: fix race between timeout and CPU hotplug
NVMe: Fix VPD B0 max sectors translation
- Fix blkback regression if using persistent grants.
- Fix various event channel related suspend/resume bugs.
- Fix AMD x86 regression with X86_BUG_SYSRET_SS_ATTRS.
- SWIOTLB on ARM now uses frames <4 GiB (if available) so device only
capable of 32-bit DMA work.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iQEcBAABAgAGBQJVSiC1AAoJEFxbo/MsZsTRojgH/1zWPD0r5WMAEPb6DFdb7Ga1
SqBbyHFu43axNwZ7EvUzSqI8BKDPbTnScQ3+zC6Zy1SIEfS+40+vn7kY/uASmWtK
LYaYu8nd49OZP8ykH0HEvsJ2LXKnAwqAwvVbEigG7KJA7h8wXo7aDwdwxtZmHlFP
18xRTfHcrnINtAJpjVRmIGZsCMXhXQz4bm0HwsXTTX0qUcRWtxydKDlMPTVFyWR8
wQ2m5+76fQ8KlFsoJEB0M9ygFdheZBF4FxBGHRrWXBUOhHrQITnH+cf1aMVxTkvy
NDwiEebwXUDHacv21onszoOkNjReLsx+DWp9eHknlT/fgPo6tweMM2yazFGm+JQ=
=W683
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.1b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen bug fixes from David Vrabel:
- fix blkback regression if using persistent grants
- fix various event channel related suspend/resume bugs
- fix AMD x86 regression with X86_BUG_SYSRET_SS_ATTRS
- SWIOTLB on ARM now uses frames <4 GiB (if available) so device only
capable of 32-bit DMA work.
* tag 'for-linus-4.1b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: Add __GFP_DMA flag when xen_swiotlb_init gets free pages on ARM
hypervisor/x86/xen: Unset X86_BUG_SYSRET_SS_ATTRS on Xen PV guests
xen/events: Set irq_info->evtchn before binding the channel to CPU in __startup_pirq()
xen/console: Update console event channel on resume
xen/xenbus: Update xenbus event channel on resume
xen/events: Clear cpu_evtchn_mask before resuming
xen-pciback: Add name prefix to global 'permissive' variable
xen: Suspend ticks on all CPUs during suspend
xen/grant: introduce func gnttab_unmap_refs_sync()
xen/blkback: safely unmap purge persistent grants
Revert commit c72c6160d9
It was intended to be a cosmetic change that w/o any functional change
and was part of a bigger change:
http://lkml.iu.edu/hypermail/linux/kernel/1503.1/01818.html
Sergey Senozhatsky <sergey.senozhatsky.work@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Nitin Gupta <ngupta@vflare.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If there are too many pending per work I/O, too many
high priority work thread can be generated so that
system performance can be effected.
This patch limits the max_active parameter of workqueue as 16.
This patch fixes Fedora 22 live booting performance
regression when it is booted from squashfs over dm
based on loop, and looks the following reasons are
related with the problem:
- not like other filesyststems(such as ext4), squashfs
is a bit special, and I observed that increasing I/O jobs
to access file in squashfs only improve I/O performance a
little, but it can make big difference for ext4
- nested loop: both squashfs.img and ext3fs.img are mounted
as loop block, and ext3fs.img is inside the squashfs
- during booting, lots of tasks may run concurrently
Fixes: b5dd2f6047
Cc: stable@vger.kernel.org (v4.0)
Cc: Justin M. Forbes <jforbes@fedoraproject.org>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
Documentation/workqueue.txt:
If there is dependency among multiple work items used
during memory reclaim, they should be queued to separate
wq each with WQ_MEM_RECLAIM.
Loop devices can be stacked, so we have to convert to per-device
workqueue. One example is Fedora live CD.
Fixes: b5dd2f6047
Cc: stable@vger.kernel.org (v4.0)
Cc: Justin M. Forbes <jforbes@fedoraproject.org>
Signed-off-by: Ming Lei <ming.lei@canonical.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
Sunad Bhandary
Keith Busch
Jeff Moyer
Jon Derrick
Matias Bjørling
Markus Pargmann
Sergey Senozhatsky
Linus Torvalds
Kent Overstreet
Ilya Dryomov
Christoph Hellwig
Jens Axboe
Bob Liu
Mike Krinkin
Andrew Morton
Sergey Senozhatsky
Marcin Jabrzyk
Yan, Zheng
Dan Williams
Selvan Mani
Al Viro
Miklos Szeredi
Axel Lin
Julien Grall
Asai Thambi SP
David S. Miller
Richard Weinberger
Weijie Yang
Geert Uytterhoeven
Geoff Levand
Toshi Kani
Tejun Heo
Akinobu Mita
Hannes Reinecke
Sudip Mukherjee
Tomas Henzl
Arnd Bergmann
Luis R. Rodriguez
Ming Lei
Eric W. Biederman