Граф коммитов

111 Коммитов

Автор SHA1 Сообщение Дата
Colin Ian King 60aa80460d esp4: remove redundant initialization of pointer esph
Pointer esph is being assigned a value that is never read, esph is
re-assigned and only read inside an if statement, hence the
initialization is redundant and can be removed.

Cleans up clang warning:
net/ipv4/esp4.c:657:21: warning: Value stored to 'esph' during
its initialization is never read

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-02-13 13:59:03 +01:00
David S. Miller c02b3741eb Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Overlapping changes all over.

The mini-qdisc bits were a little bit tricky, however.

Signed-off-by: David S. Miller <davem@davemloft.net>
2018-01-17 00:10:42 -05:00
Herbert Xu bcfd09f783 xfrm: Return error on unknown encap_type in init_state
Currently esp will happily create an xfrm state with an unknown
encap type for IPv4, without setting the necessary state parameters.
This patch fixes it by returning -EINVAL.

There is a similar problem in IPv6 where if the mode is unknown
we will skip initialisation while returning zero.  However, this
is harmless as the mode has already been checked further up the
stack.  This patch removes this anomaly by aligning the IPv6
behaviour with IPv4 and treating unknown modes (which cannot
actually happen) as transport mode.

Fixes: 38320c70d2 ("[IPSEC]: Use crypto_aead and authenc in ESP")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2018-01-08 07:17:52 +01:00
Steffen Klassert f58869c44f esp: Don't require synchronous crypto fallback on offloading anymore.
We support asynchronous crypto on layer 2 ESP now.
So no need to force synchronous crypto fallback on
offloading anymore.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-12-20 10:41:53 +01:00
Steffen Klassert f53c723902 net: Add asynchronous callbacks for xfrm on layer 2.
This patch implements asynchronous crypto callbacks
and a backlog handler that can be used when IPsec
is done at layer 2 in the TX path. It also extends
the skb validate functions so that we can update
the driver transmit return codes based on async
crypto operation or to indicate that we queued the
packet in a backlog queue.

Joint work with: Aviv Heller <avivh@mellanox.com>

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-12-20 10:41:36 +01:00
Gilad Ben-Yossef 068c2e7035 net: use -ENOSPC for transient busy indication
Replace -EBUSY with -ENOSPC when handling transient busy
indication in the absence of backlog.

Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-03 22:11:17 +08:00
David S. Miller 6026e043d0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Three cases of simple overlapping changes.

Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-01 17:42:05 -07:00
Yossi Kuperman 47ebcc0bb1 xfrm: Add support for network devices capable of removing the ESP trailer
In conjunction with crypto offload [1], removing the ESP trailer by
hardware can potentially improve the performance by avoiding (1) a
cache miss incurred by reading the nexthdr field and (2) the necessity
to calculate the csum value of the trailer in order to keep skb->csum
valid.

This patch introduces the changes to the xfrm stack and merely serves
as an infrastructure. Subsequent patch to mlx5 driver will put this to
a good use.

[1] https://www.mail-archive.com/netdev@vger.kernel.org/msg175733.html

Signed-off-by: Yossi Kuperman <yossiku@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-08-31 09:04:03 +02:00
Steffen Klassert 54ffd79079 esp: Fix skb tailroom calculation
We use skb_availroom to calculate the skb tailroom for the
ESP trailer. skb_availroom calculates the tailroom and
subtracts this value by reserved_tailroom. However
reserved_tailroom is a union with the skb mark. This means
that we subtract the tailroom by the skb mark if set.
Fix this by using skb_tailroom instead.

Fixes: cac2661c53 ("esp4: Avoid skb_cow_data whenever possible")
Fixes: 03e2a30f6a ("esp6: Avoid skb_cow_data whenever possible")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-08-25 09:26:24 +02:00
Steffen Klassert 36ff0dd39f esp: Fix locking on page fragment allocation
We allocate the page fragment for the ESP trailer inside
a spinlock, but consume it outside of the lock. This
is racy as some other cou could get the same page fragment
then. Fix this by consuming the page fragment inside the
lock too.

Fixes: cac2661c53 ("esp4: Avoid skb_cow_data whenever possible")
Fixes: 03e2a30f6a ("esp6: Avoid skb_cow_data whenever possible")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-08-25 09:26:12 +02:00
Ilan Tayari ec9567a9e0 esp4: Support RX checksum with crypto offload
Keep the device's reported ip_summed indication in case crypto
was offloaded by the device. Subtract the csum values of the
stripped parts (esp header+iv, esp trailer+auth_data) to keep
value correct.

Note: CHECKSUM_COMPLETE should be indicated only if skb->csum
has the post-decryption offload csum value.

Signed-off-by: Ariel Levkovich <lariel@mellanox.com>
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-08-02 11:00:15 +02:00
Steffen Klassert e619492323 esp: Fix memleaks on error paths.
We leak the temporary allocated resources in error paths,
fix this by freeing them.

Fixes: fca11ebde3 ("esp4: Reorganize esp_output")
Fixes: 383d0350f2 ("esp6: Reorganize esp_output")
Fixes: 3f29770723 ("ipsec: check return value of skb_to_sgvec always")
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-07-13 09:26:24 +02:00
Reshetova, Elena 14afee4b60 net: convert sock.sk_wmem_alloc from atomic_t to refcount_t
refcount_t type and corresponding API should be
used instead of atomic_t when the variable is used as
a reference counter. This allows to avoid accidental
refcounter overflows that might lead to use-after-free
situations.

Signed-off-by: Elena Reshetova <elena.reshetova@intel.com>
Signed-off-by: Hans Liljestrand <ishkamiel@gmail.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: David Windsor <dwindsor@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-07-01 07:39:08 -07:00
Johannes Berg d58ff35122 networking: make skb_push & __skb_push return void pointers
It seems like a historic accident that these return unsigned char *,
and in many places that means casts are required, more often than not.

Make these functions return void * and remove all the casts across
the tree, adding a (u8 *) cast only where the unsigned char pointer
was used directly, all done with the following spatch:

    @@
    expression SKB, LEN;
    typedef u8;
    identifier fn = { skb_push, __skb_push, skb_push_rcsum };
    @@
    - *(fn(SKB, LEN))
    + *(u8 *)fn(SKB, LEN)

    @@
    expression E, SKB, LEN;
    identifier fn = { skb_push, __skb_push, skb_push_rcsum };
    type T;
    @@
    - E = ((T *)(fn(SKB, LEN)))
    + E = fn(SKB, LEN)

    @@
    expression SKB, LEN;
    identifier fn = { skb_push, __skb_push, skb_push_rcsum };
    @@
    - fn(SKB, LEN)[0]
    + *(u8 *)fn(SKB, LEN)

Note that the last part there converts from push(...)[0] to the
more idiomatic *(u8 *)push(...).

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-16 11:48:40 -04:00
Jason A. Donenfeld 3f29770723 ipsec: check return value of skb_to_sgvec always
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-06-04 23:01:47 -04:00
Steffen Klassert 0e78a87306 esp4: Fix udpencap for local TCP packets.
Locally generated TCP packets are usually cloned, so we
do skb_cow_data() on this packets. After that we need to
reload the pointer to the esp header. On udpencap this
header has an offset to skb_transport_header, so take this
offset into account.

Fixes: 67d349ed60 ("net/esp4: Fix invalid esph pointer crash")
Fixes: fca11ebde3 ("esp4: Reorganize esp_output")
Reported-by: Don Bowman <db@donbowman.ca>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-05-04 07:27:26 +02:00
Ilan Tayari 67d349ed60 net/esp4: Fix invalid esph pointer crash
Both esp_output and esp_xmit take a pointer to the ESP header
and place it in esp_info struct prior to calling esp_output_head.

Inside esp_output_head, the call to esp_output_udp_encap
makes sure to update the pointer if it gets invalid.
However, if esp_output_head itself calls skb_cow_data, the
pointer is not updated and stays invalid, causing a crash
after esp_output_head returns.

Update the pointer if it becomes invalid in esp_output_head

Fixes: fca11ebde3 ("esp4: Reorganize esp_output")
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2017-05-01 14:58:50 -04:00
Steffen Klassert e892d2d404 esp: Fix misplaced spin_unlock_bh.
A recent commit moved esp_alloc_tmp() out of a lock
protected region, but forgot to remove the unlock from
the error path. This patch removes the forgotten unlock.
While at it, remove some unneeded error assignments too.

Fixes: fca11ebde3 ("esp4: Reorganize esp_output")
Fixes: 383d0350f2 ("esp6: Reorganize esp_output")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-04-24 07:56:31 +02:00
Steffen Klassert b3859c8ebf esp: Use a synchronous crypto algorithm on offloading.
We need a fallback algorithm for crypto offloading to a NIC.
This is because packets can be rerouted to other NICs that
don't support crypto offloading. The fallback is going to be
implemented at layer2 where we know the final output device
but can't handle asynchronous returns fron the crypto layer.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-04-14 10:07:19 +02:00
Steffen Klassert 7862b4058b esp: Add gso handlers for esp4 and esp6
This patch extends the xfrm_type by an encap function pointer
and implements esp4_gso_encap and esp6_gso_encap. These functions
doing the basic esp encapsulation for a GSO packet. In case the
GSO packet needs to be segmented in software, we add gso_segment
functions. This codepath is going to be used on esp hardware
offloads.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-04-14 10:06:50 +02:00
Steffen Klassert fca11ebde3 esp4: Reorganize esp_output
We need a fallback for ESP at layer 2, so split esp_output
into generic functions that can be used at layer 3 and layer 2
and use them in esp_output. We also add esp_xmit which is
used for the layer 2 fallback.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-04-14 10:06:33 +02:00
Steffen Klassert d77e38e612 xfrm: Add an IPsec hardware offloading API
This patch adds all the bits that are needed to do
IPsec hardware offload for IPsec states and ESP packets.
We add xfrmdev_ops to the net_device. xfrmdev_ops has
function pointers that are needed to manage the xfrm
states in the hardware and to do a per packet
offloading decision.

Joint work with:
Ilan Tayari <ilant@mellanox.com>
Guy Shapiro <guysh@mellanox.com>
Yossi Kuperman <yossiku@mellanox.com>

Signed-off-by: Guy Shapiro <guysh@mellanox.com>
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Yossi Kuperman <yossiku@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-04-14 10:06:10 +02:00
Steffen Klassert eb758c8864 esp: Introduce a helper to setup the trailer
We need to setup the trailer in two different cases,
so add a helper to avoid code duplication.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-01-17 10:23:08 +01:00
Steffen Klassert cac2661c53 esp4: Avoid skb_cow_data whenever possible
This patch tries to avoid skb_cow_data on esp4.

On the encrypt side we add the IPsec tailbits
to the linear part of the buffer if there is
space on it. If there is no space on the linear
part, we add a page fragment with the tailbits to
the buffer and use separate src and dst scatterlists.

On the decrypt side, we leave the buffer as it is
if it is not cloned.

With this, we can avoid a linearization of the buffer
in most of the cases.

Joint work with:
Sowmini Varadhan <sowmini.varadhan@oracle.com>
Ilan Tayari <ilant@mellanox.com>

Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Signed-off-by: Ilan Tayari <ilant@mellanox.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2017-01-17 10:22:57 +01:00
Tobias Brunner 7c7fedd51c esp4: Fix integrity verification when ESN are used
When handling inbound packets, the two halves of the sequence number
stored on the skb are already in network order.

Fixes: 7021b2e1cd ("esp4: Switch to new AEAD interface")
Signed-off-by: Tobias Brunner <tobias@strongswan.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2016-11-30 11:09:39 +01:00
Herbert Xu 962fcef33b esp: Fix ESN generation under UDP encapsulation
Blair Steven noticed that ESN in conjunction with UDP encapsulation
is broken because we set the temporary ESP header to the wrong spot.

This patch fixes this by first of all using the right spot, i.e.,
4 bytes off the real ESP header, and then saving this information
so that after encryption we can restore it properly.

Fixes: 7021b2e1cd ("esp4: Switch to new AEAD interface")
Reported-by: Blair Steven <Blair.Steven@alliedtelesis.co.nz>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2016-06-23 11:52:00 -04:00
Herbert Xu 7021b2e1cd esp4: Switch to new AEAD interface
This patch makes use of the new AEAD interface which uses a single
SG list instead of separate lists for the AD and plain text.  The
IV generation is also now carried out through normal AEAD methods.

Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2015-05-28 11:23:20 +08:00
Ian Morris 51456b2914 ipv4: coding style: comparison for equality with NULL
The ipv4 code uses a mixture of coding styles. In some instances check
for NULL pointer is done as x == NULL and sometimes as !x. !x is
preferred according to checkpatch and this patch makes the code
consistent by adopting the latter form.

No changes detected by objdiff.

Signed-off-by: Ian Morris <ipm@chirality.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-04-03 12:11:15 -04:00
Joe Perches 4508349777 net: esp: Convert NETDEBUG to pr_info
Commit 64ce207306 ("[NET]: Make NETDEBUG pure printk wrappers")
originally had these NETDEBUG printks as always emitting.

Commit a2a316fd06 ("[NET]: Replace CONFIG_NET_DEBUG with sysctl")
added a net_msg_warn sysctl to these NETDEBUG uses.

Convert these NETDEBUG uses to normal pr_info calls.

This changes the output prefix from "ESP: " to include
"IPSec: " for the ipv4 case and "IPv6: " for the ipv6 case.

These output lines are now like the other messages in the files.

Other miscellanea:

Neaten the arithmetic spacing to be consistent with other
arithmetic spacing in the files.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-06 15:11:10 -05:00
Fabian Frederick 05006e8c59 esp4: remove assignment in if condition
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
2014-11-04 16:57:49 -05:00
Steffen Klassert 827789cbd7 esp4: Use the IPsec protocol multiplexer API
Switch esp4 to use the new IPsec protocol multiplexer.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2014-02-25 07:04:17 +01:00
Mathias Krause 1c5ad13f7c net: esp{4,6}: get rid of struct esp_data
struct esp_data consists of a single pointer, vanishing the need for it
to be a structure. Fold the pointer into 'data' direcly, removing one
level of pointer indirection.

Signed-off-by: Mathias Krause <mathias.krause@secunet.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2013-10-29 06:39:42 +01:00
Mathias Krause 123b0d1ba0 net: esp{4,6}: remove padlen from struct esp_data
The padlen member of struct esp_data is always zero. Get rid of it.

Signed-off-by: Mathias Krause <mathias.krause@secunet.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2013-10-29 06:39:42 +01:00
Daniel Borkmann 7921895a5e net: esp{4,6}: fix potential MTU calculation overflows
Commit 91657eafb ("xfrm: take net hdr len into account for esp payload
size calculation") introduced a possible interger overflow in
esp{4,6}_get_mtu() handlers in case of x->props.mode equals
XFRM_MODE_TUNNEL. Thus, the following expression will overflow

  unsigned int net_adj;
  ...
  <case ipv{4,6} XFRM_MODE_TUNNEL>
         net_adj = 0;
  ...
  return ((mtu - x->props.header_len - crypto_aead_authsize(esp->aead) -
           net_adj) & ~(align - 1)) + (net_adj - 2);

where (net_adj - 2) would be evaluated as <foo> + (0 - 2) in an unsigned
context. Fix it by simply removing brackets as those operations here
do not need to have special precedence.

Signed-off-by: Daniel Borkmann <dborkman@redhat.com>
Cc: Benjamin Poirier <bpoirier@suse.de>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Benjamin Poirier <bpoirier@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-08-05 12:26:50 -07:00
Timo Teräs 387aa65a89 ipv4: properly refresh rtable entries on pmtu/redirect events
This reverts commit 05ab86c5 (xfrm4: Invalidate all ipv4 routes on
IPsec pmtu events). Flushing all cached entries is not needed.

Instead, invalidate only the related next hop dsts to recheck for
the added next hop exception where needed. This also fixes a subtle
race due to bumping generation id's before updating the pmtu.

Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-03 00:07:42 -07:00
Wei Yongjun 06848c10f7 esp4: fix error return code in esp_output()
Fix to return a negative error code from the error handling
case instead of 0, as returned elsewhere in this function.

Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2013-04-15 14:05:34 -04:00
Steffen Klassert 05ab86c556 xfrm4: Invalidate all ipv4 routes on IPsec pmtu events
On IPsec pmtu events we can't access the transport headers of
the original packet, so we can't find the socket that sent
the packet. The only chance to notify the socket about the
pmtu change is to force a relookup for all routes. This
patch implenents this for the IPsec protocols.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2013-01-21 12:43:54 +01:00
Li RongQing 7143dfac69 ah4/esp4: set transport header correctly for IPsec tunnel mode.
IPsec tunnel does not set ECN field to CE in inner header when
the ECN field in the outer header is CE, and the ECN field in
the inner header is ECT(0) or ECT(1).

The cause is ipip_hdr() does not return the correct address of
inner header since skb->transport-header is not the inner header
after esp_input_done2(), or ah_input().

Signed-off-by: Li RongQing <roy.qing.li@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2013-01-08 12:41:30 +01:00
David S. Miller 55be7a9c60 ipv4: Add redirect support to all protocol icmp error handlers.
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-07-11 21:27:49 -07:00
David S. Miller 3639339553 ipv4: Handle PMTU in all ICMP error handlers.
With ip_rt_frag_needed() removed, we have to explicitly update PMTU
information in every ICMP error handler.

Create two helper functions to facilitate this.

1) ipv4_sk_update_pmtu()

   This updates the PMTU when we have a socket context to
   work with.

2) ipv4_update_pmtu()

   Raw version, used when no socket context is available.  For this
   interface, we essentially just pass in explicit arguments for
   the flow identity information we would have extracted from the
   socket.

   And you'll notice that ipv4_sk_update_pmtu() is simply implemented
   in terms of ipv4_update_pmtu()

Note that __ip_route_output_key() is used, rather than something like
ip_route_output_flow() or ip_route_output_key().  This is because we
absolutely do not want to end up with a route that does IPSEC
encapsulation and the like.  Instead, we only want the route that
would get us to the node described by the outermost IP header.

Reported-by: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-14 22:22:07 -07:00
Benjamin Poirier 91657eafb6 xfrm: take net hdr len into account for esp payload size calculation
Corrects the function that determines the esp payload size. The calculations
done in esp{4,6}_get_mtu() lead to overlength frames in transport mode for
certain mtu values and suboptimal frames for others.

According to what is done, mainly in esp{,6}_output() and tcp_mtu_to_mss(),
net_header_len must be taken into account before doing the alignment
calculation.

Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-05-27 01:08:29 -04:00
Joe Perches afd465030a net: ipv4: Standardize prefixes for message logging
Add #define pr_fmt(fmt) as appropriate.

Add "IPv4: ", "TCP: ", and "IPsec: " to appropriate files.
Standardize on "UDPLite: " for appropriate uses.
Some prefixes were previously "UDPLITE: " and "UDP-Lite: ".

Add KBUILD_MODNAME ": " to icmp and gre.
Remove embedded prefixes as appropriate.

Add missing "\n" to pr_info in gre.c.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-12 17:05:21 -07:00
Joe Perches 058bd4d2a4 net: Convert printks to pr_<level>
Use a more current kernel messaging style.

Convert a printk block to print_hex_dump.
Coalesce formats, align arguments.
Use %s, __func__ instead of embedding function names.

Some messages that were prefixed with <foo>_close are
now prefixed with <foo>_fini.  Some ah4 and esp messages
are now not prefixed with "ip ".

The intent of this patch is to later add something like
  #define pr_fmt(fmt) "IPv4: " fmt.
to standardize the output messages.

Text size is trivially reduced. (x86-32 allyesconfig)

$ size net/ipv4/built-in.o*
   text	   data	    bss	    dec	    hex	filename
 887888	  31558	 249696	1169142	 11d6f6	net/ipv4/built-in.o.new
 887934	  31558	 249800	1169292	 11d78c	net/ipv4/built-in.o.old

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-03-11 23:42:51 -07:00
Eric Dumazet b71d1d426d inet: constify ip headers and in6_addr
Add const qualifiers to structs iphdr, ipv6hdr and in6_addr pointers
where possible, to make code intention more obvious.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-22 11:04:14 -07:00
Steffen Klassert 0dc49e9b28 esp4: Add support for IPsec extended sequence numbers
This patch adds IPsec extended sequence numbers support to esp4.
We use the authencesn crypto algorithm to handle esp with separate
encryption/authentication algorithms.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-13 20:22:29 -07:00
Steffen Klassert 1ce3644ade xfrm: Use separate low and high order bits of the sequence numbers in xfrm_skb_cb
To support IPsec extended sequence numbers, we split the
output sequence numbers of xfrm_skb_cb in low and high order 32 bits
and we add the high order 32 bits to the input sequence numbers.
All users are updated accordingly.

Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-13 20:22:28 -07:00
Martin Willi d979e20f2b xfrm: Traffic Flow Confidentiality for IPv4 ESP
Add TFC padding to all packets smaller than the boundary configured
on the xfrm state. If the boundary is larger than the PMTU, limit
padding to the PMTU.

Signed-off-by: Martin Willi <martin@strongswan.org>
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-12-10 14:43:59 -08:00
Jamal Hadi Salim bd55775c8d xfrm: SA lookups signature with mark
pass mark to all SA lookups to prepare them for when we add code
to have them search.

Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-02-22 16:20:22 -08:00
Martin Willi 8f8a088c21 xfrm: Use the user specified truncation length in ESP and AH
Instead of using the hardcoded truncation for authentication
algorithms, use the truncation length specified on xfrm_state.

Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-25 15:48:41 -08:00
Alexey Dobriyan 32613090a9 net: constify struct net_protocol
Remove long removed "inet_protocol_base" declaration.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-14 17:03:01 -07:00