Граф коммитов

70 Коммитов

Автор SHA1 Сообщение Дата
Ondrej Zary 59b564599b [media] tea575x: Move header from sound to media
Move include/sound/tea575x-tuner.h to include/media/tea575x.h and update files that include it.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2013-08-18 08:08:05 -03:00
Ondrej Zary 8e0d70434d ALSA: es1968: Add radio support for MediaForte M56VAP
Add support for TEA5757 tuner on MediaForte M56VAP sound+modem+radio card.
The GPIO connection type is automatically detected (like snd-fm801 driver).

Also add a safety subsystem vendor check to skip radio detection if vendor
differs from ESS (so we don't touch GPIOs on laptops).

Tested with SF64-PCE2 and M56VAP cards.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-05-31 08:39:48 +02:00
Takashi Iwai 20a24225d8 ALSA: PCI: Remove superfluous pci_set_drvdata(pci, NULL) at remove
As drvdata is cleared to NULL at probe failure or at removal by the
driver core, we don't have to call pci_set_drvdata(pci, NULL) any
longer in each driver.

The only remaining pci_set_drvdata(NULL) is in azx_firmware_cb() in
hda_intel.c.  Since this function itself releases the card instance,
we need to clear drvdata here as well, so that it won't be released
doubly in the remove callback.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-05-29 12:37:32 +02:00
Linus Torvalds a2013a13e6 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial
Pull trivial branch from Jiri Kosina:
 "Usual stuff -- comment/printk typo fixes, documentation updates, dead
  code elimination."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (39 commits)
  HOWTO: fix double words typo
  x86 mtrr: fix comment typo in mtrr_bp_init
  propagate name change to comments in kernel source
  doc: Update the name of profiling based on sysfs
  treewide: Fix typos in various drivers
  treewide: Fix typos in various Kconfig
  wireless: mwifiex: Fix typo in wireless/mwifiex driver
  messages: i2o: Fix typo in messages/i2o
  scripts/kernel-doc: check that non-void fcts describe their return value
  Kernel-doc: Convention: Use a "Return" section to describe return values
  radeon: Fix typo and copy/paste error in comments
  doc: Remove unnecessary declarations from Documentation/accounting/getdelays.c
  various: Fix spelling of "asynchronous" in comments.
  Fix misspellings of "whether" in comments.
  eisa: Fix spelling of "asynchronous".
  various: Fix spelling of "registered" in comments.
  doc: fix quite a few typos within Documentation
  target: iscsi: fix comment typos in target/iscsi drivers
  treewide: fix typo of "suport" in various comments and Kconfig
  treewide: fix typo of "suppport" in various comments
  ...
2012-12-13 12:00:02 -08:00
Bill Pemberton e23e7a1436 ALSA: pci: remove __dev* attributes
CONFIG_HOTPLUG is going away as an option.  As result the __dev*
markings will be going away.

Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.

Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-12-07 07:20:55 +01:00
Adam Buchbinder 48fc7f7e78 Fix misspellings of "whether" in comments.
"Whether" is misspelled in various comments across the tree; this
fixes them. No code changes.

Signed-off-by: Adam Buchbinder <adam.buchbinder@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-19 14:31:35 +01:00
Dan Carpenter d2153a1595 ALSA: es1968: precedence bug in snd_es1968_tea575x_get_pins()
I don't think this works as intended.  '|' higher precedence than ?: so
the bitwize OR "0 | (val & STR_MOST)" is a no-op.

I have re-written it to be more clear.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-13 08:51:47 +01:00
Ondrej Zary 5c0ee9497b ALSA: es1968: Add ESS vendor ID to pm_whitelist
Add generic ESS vendor ID to pm_whitelist. This should fix suspend on
all Maestro-2 and Maestro-2E based PCI cards.
Tested on Terratec DMX and SF64-PCE2.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-11-05 12:32:35 +01:00
Takashi Iwai c7561cd804 ALSA: PCI: Replace CONFIG_PM with CONFIG_PM_SLEEP
Otherwise we may get compile warnings due to unused functions.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-08-14 18:12:04 +02:00
Takashi Iwai 68cb2b5592 ALSA: Convert to new pm_ops for PCI drivers
Straightforward conversion to the new pm_ops from the legacy
suspend/resume ops.

Since we change vx222, vx_core and vxpocket have to be converted,
too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-07-03 08:23:03 +02:00
Linus Torvalds aace99e57c Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab.

Trivial conflict due to new USB HID ID's being added next to each other
(Baanto vs Axentia).

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (44 commits)
  [media] smia: Fix compile failures
  [media]  Fix VIDIOC_DQEVENT docbook entry
  [media] s5p-fimc: Fix control creation function
  [media] s5p-mfc: Fix checkpatch error in s5p_mfc_shm.h file
  [media] s5p-mfc: Fix setting controls
  [media] v4l/s5p-mfc: added image size align in VIDIOC_TRY_FMT
  [media] v4l/s5p-mfc: corrected encoder v4l control definitions
  [media] v4l: mem2mem_testdev: Fix race conditions in driver
  [media] s5p-mfc: Bug fix of timestamp/timecode copy mechanism
  [media] cxd2820r: Fix an incorrect modulation type bitmask
  [media] em28xx: Show a warning if the board does not support remote controls
  [media] em28xx: Add remote control support for Terratec's Cinergy HTC Stick HD
  [media] USB: Staging: media: lirc: initialize spinlocks before usage
  [media] Revert "[media] media: mx2_camera: Fix mbus format handling"
  [media] bw-qcam: driver and pixfmt documentation fixes
  [media] cx88: fix firmware load on big-endian systems
  [media] cx18: support big-endian systems
  [media] ivtv: fix support for big-endian systems
  [media] tuner-core: return the frequency range of the correct tuner
  [media] v4l2-dev.c: fix g_parm regression in determine_valid_ioctls()
  ...
2012-06-25 14:53:09 -07:00
Hans de Goede 5daf53a6eb [media] snd_tea575x: Make the module using snd_tea575x the fops owner
Before this patch the owner field of the /dev/radio# device fops was set to
the snd-tea575x-tuner module itself. Meaning that the module which was using
it could be rmmod-ed while the device is open, and then BAD things happen.

I know, as I found out the hard way :)

Note that there is no need to also somehow increase the refcount of the
snd-tea575x-tuner module itself, since any drivers using it will have
symbolic references to it.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
CC: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-06-11 16:02:54 -03:00
Takashi Iwai e9f66d9b9c ALSA: pci: clean up using module_pci_driver()
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-24 12:25:00 +02:00
Hans Verkuil d4ecc83b79 [media] tea575x-tuner: update to latest V4L2 framework requirements
The tea575x-tuner module has been updated to use the latest V4L2 framework
functionality. This also required changes in the drivers that rely on it.

The tea575x changes are:

- The drivers must provide a v4l2_device struct to the tea module.
- The radio_nr module parameter must be part of the actual radio driver,
  and not of the tea module.
- Changed the frequency range to the normal 76-108 MHz range instead of
  50-150.
- Add hardware frequency seek support.
- Fix broken rxsubchans/audmode handling.
- The application can now select between stereo and mono.
- Support polling for control events.
- Add V4L2 priority handling.

And radio-sf16fmr2.c now uses the isa bus kernel framework.

Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Thanks-to: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-03-19 11:27:21 -03:00
Rusty Russell a67ff6a540 ALSA: module_param: make bool parameters really bool
module_param(bool) used to counter-intuitively take an int.  In
fddd5201 (mid-2009) we allowed bool or int/unsigned int using a messy
trick.

It's time to remove the int/unsigned int option.  For this version
it'll simply give a warning, but it'll break next kernel version.

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-12-19 10:34:41 +01:00
Paul Gortmaker 65a772172b sound: fix drivers needing module.h not moduleparam.h
The implicit presence of module.h lured several users into
incorrectly thinking that they only needed/used modparam.h
but once we clean up the module.h presence, these will show
up as build failures, so fix 'em now.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 19:31:19 -04:00
Clemens Ladisch dba8b46992 ALSA: mpu401: clean up interrupt specification
The semantics of snd_mpu401_uart_new()'s interrupt parameters are
somewhat counterintuitive:  To prevent the function from allocating its
own interrupt, either the irq number must be invalid, or the irq_flags
parameter must be zero.  At the same time, the irq parameter being
invalid specifies that the mpu401 code has to work without an interrupt
allocated by the caller.  This implies that, if there is an interrupt
and it is allocated by the caller, the irq parameter must be set to
a valid-looking number which then isn't actually used.

With the removal of IRQF_DISABLED, zero becomes a valid irq_flags value,
which forces us to handle the parameters differently.

This patch introduces a new flag MPU401_INFO_IRQ_HOOK for when the
device interrupt is handled by the caller, and makes the allocation of
the interrupt to depend only on the irq parameter.  As suggested by
Takashi, the irq_flags parameter was dropped because, when used, it had
the constant value IRQF_DISABLED.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-09-14 11:00:51 +02:00
Takashi Iwai 30bdee0259 ALSA: es1968,maestro3 - Use work for hw-volume control
Instead of tasklet, use workq for handling the hw-volume control.
This reduces lots of spinlocks.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-14 13:59:51 +02:00
Takashi Iwai 934c2b6d0c ALSA: use KBUILD_MODNAME for request_irq argument in sound/pci/*
The name argument of request_irq() appears in /proc/interrupts, and
it's quite ugly when the name entry contains a space or special letters.
In general, it's simpler and more readable when the module name appears
there, so let's replace all entries with KBUILD_MODNAME.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-10 16:36:37 +02:00
Takashi Iwai 3733e424c4 ALSA: Use KBUILD_MODNAME for pci_driver.name entries
The convention for pci_driver.name entry in kernel drivers seem to be
the module name or equivalent ones.  But, so far, almost all PCI sound
drivers use more verbose name like "ABC Xyz (12)", and these are fairly
confusing when appearing as a file name.

This patch converts the all pci_driver.name entries in sound/pci/* to
use KBUILD_MODNAME for more unified appearance.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-06-10 16:20:20 +02:00
Ondrej Zary 10ca720147 ALSA: tea575x: use better card and bus names
Provide real card and bus_info instead of hardcoded values.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-13 19:43:24 +02:00
Ondrej Zary 3d11ba5593 ALSA: tea575x: remove unused card from struct
struct snd_card *card is present in struct snd_tea575x but never used.
Remove it.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-13 19:43:14 +02:00
Ondrej Zary ea27316e4c ALSA: tea575x: remove freq_fixup from struct
freq_fixup is a constant, no need to hold it in struct snd_tea575x and set in
each driver.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-13 19:43:01 +02:00
Ondrej Zary 72587173cc ALSA: es1968: convert TEA575x support to new interface
Use common functions to access TEA575x tuner - remove original read/write
functions and provide new pin manipulation functions instead.

Tested with SF64-PCE2 card.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-05-10 09:31:29 +02:00
Ondrej Zary 1872f58995 ALSA: es1968: add radio (tea575x tuner) support
Add TEA5757 radio tuner support to es1968 driver. This is found at least on
MediaForte SF64-PCE2 sound cards.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2011-03-21 12:44:14 +01:00
Uwe Kleine-König b595076a18 tree-wide: fix comment/printk typos
"gadget", "through", "command", "maintain", "maintain", "controller", "address",
"between", "initiali[zs]e", "instead", "function", "select", "already",
"equal", "access", "management", "hierarchy", "registration", "interest",
"relative", "memory", "offset", "already",

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-11-01 15:38:34 -04:00
Ville Syrjälä 6895b5262e ALSA: es1968: Clear interrupts before enabling them
Avoid spurious interrupts when initializing the device.

Signed-off-by: Ville Syrjälä <syrjala@sci.fi>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-05-08 11:51:06 +02:00
Hans de Goede 5a5e02e509 ALSA: snd-es1968: Make hardware volume buttons an input device (rev2)
The hardware volume handling code in essence just detects key presses, and
then does some hardcoded modification of the master volume based on which key
is pressed.

Clearly the right thing to do here is just report these keypresses to
userspace and let userspace decide what to with them.

This patch adds a Kconfig option which when enabled reports the volume
buttons as keypresses using an input device. When enabled this option
also gets rid of the ugly direct ac97 writes from the tasklet, the ac97lock
and the need for using a tasklet in general.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-04-23 17:09:59 +02:00
Alexey Dobriyan cebe41d4b8 sound: use DEFINE_PCI_DEVICE_TABLE
Use DEFINE_PCI_DEVICE_TABLE() to make PCI device ids go to
.devinit.rodata section, so they can be discarded in some cases,
and make them const.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-02-09 11:08:33 +01:00
Yang Hongyang ce0b620160 dma-mapping: replace all DMA_28BIT_MASK macro with DMA_BIT_MASK(28)
Replace all DMA_28BIT_MASK macro with DMA_BIT_MASK(28)

Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07 08:31:12 -07:00
Takashi Iwai e58de7baf7 ALSA: Convert to snd_card_create() in sound/pci/*
Convert from snd_card_new() to the new snd_card_create() function
in sound/pci/*.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2009-01-12 15:20:55 +01:00
Takashi Iwai 1f04128a3d ALSA: hda - Convert from takslet_hi_schedule() to tasklet_schedule()
Replace all tasklet_hi_schedule() callers with the normal
tasklet_schedule().  The former often causes troubles with
RT-kernels, and has actually no merit.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-12-18 12:17:55 +01:00
Takashi Iwai da3cec35dd ALSA: Kill snd_assert() in sound/pci/*
Kill snd_assert() in sound/pci/*, either removed or replaced with
if () with snd_BUG_ON().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-08-13 11:46:38 +02:00
Jeff Garzik f000fd8093 [ALSA] Fix synchronize_irq() bugs, redundancies
free_irq() calls synchronize_irq() for you, so there is no need for
drivers to manually do the same thing (again).  Thus, calls where
sync-irq immediately precedes free-irq can be simplified.

However, during this audit several bugs were noticed, where free-irq is
preceded by a "irq >= 0" check... but the sync-irq call is not covered
by the same check.

So, where sync-irq could not be eliminated completely, the missing check
was added.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:40 +02:00
Andrew Morton 66c9aa6043 [ALSA] es1968 - fix coding style in the last patch
WARNING: braces {} are not necessary for single statement blocks
#40: FILE: sound/pci/es1968.c:1831:
+       if (diff > 1) {
+               __maestro_write(chip, IDR0_DATA_PORT, cp1);
+       }

total: 0 errors, 1 warnings, 35 lines checked

./patches/es1968-fix-jitter-on-some-maestro-cards.patch has style problems, please review.  If any of these errors
are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.

Please run checkpatch prior to sending patches

Cc: Andreas Mueller <andreas@stapelspeicher.org>
Tested-by: Rene Herman <rene.herman@keyaccess.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:33 +02:00
Andreas Mueller f24bfa53da [ALSA] es1968: fix jitter on some maestro cards
This patch suppresses jitter on several Maestro cards in stereo mode (ALSA of
course).

The patch is also incorporated in the *BSD drivers where I "ported" it from.

Without this patch most of the stereo audio gets out of sync and really
distorted (oss-emulation with mplayer at 48000khz worked somehow).

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:33 +02:00
Harvey Harrison 3463d8fa14 [ALSA] sound: es1968.c fox shadowed variable warning
id is used when initializing the mixer elements, use elem_id here
instead.
sound/pci/es1968.c:1963:25: warning: symbol 'id' shadows an earlier one
sound/pci/es1968.c:129:13: originally declared here

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2008-04-24 12:00:16 +02:00
Arjan van de Ven 4b47c971dc es1968: fix sleep-while-holding-lock bug
snd_es1968_ac97_read() calls snd_es1968_ac97_wait() first outside a locked
area, and later, while holding a lock.

snd_es1968_ac97_wait() has a polling loop with a cond_resched() inside it..
which sleeps, so the second call is invalid.

This patch adds a version of the wait function that just pure polls.  While
this is not very elegant in principle, it's very likely the easiest thing to
do here, we already checked if the chip was ready (while yielding) just
before, so it is very unlikely to take a long time here.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com>
Cc: Jaroslav Kysela <perex@suse.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-08 18:25:53 -07:00
Takashi Iwai 9004acc70e [ALSA] Remove sound/driver.h
This header file exists only for some hacks to adapt alsa-driver
tree.  It's useless for building in the kernel.  Let's move a few
lines in it to sound/core.h and remove it.
With this patch, sound/driver.h isn't removed but has just a single
compile warning to include it.  This should be really killed in
future.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
2008-01-31 17:29:48 +01:00
Matthias Kaehlcke 50f47ff1b9 [ALSA] ESS Maestro 1/2/2E Sound Card: Use list_for_each_entry
ESS Maestro 1/2/2E Sound Card: Use list_for_each_entry instead of
list_for_each

Signed-off-by: Matthias Kaehlcke <matthias.kaehlcke@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-10-16 16:50:41 +02:00
Rene Herman b942cf815b [ALSA] es1968 - Fix stuttering capture
Looks like the buffer size for the stereo capture has to be a
power of two.  Now added a constraint to buffer bytes.
Also removed unnecessary #if 0 lines.

Signed-off-by: Rene Herman <rene.herman@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2007-05-11 16:55:54 +02:00
Takashi Iwai 437a5a4606 [ALSA] Remove IRQF_DISABLED for shared PCI irqs
Fix IRQ flags for PCI devices.
The shared IRQs for PCI devices shouldn't be allocated with
IRQF_DISABLED.  Also, when MSI is enabled, IRQF_SHARED shouldn't
be used.
The patch removes unnecessary cast in request_irq and free_irq,
too.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-12-20 08:55:57 +01:00
Clemens Ladisch 7ab399262e [ALSA] use the ALIGN macro
Use the ALIGN macro instead of manual calculations.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-12-20 08:55:36 +01:00
Takashi Iwai 30b35399ce [ALSA] Various fixes for suspend/resume of ALSA PCI drivers
- Check the return value of pci_enable_device() and request_irq()
  in the suspend.  If any error occurs there, disable the device
  using snd_card_disconnect().
- Call pci_set_power_state() properly with pci_choose_state().
- Fix the order to call pci_set_power_state().
- Removed obsolete house-made PM codes in some drivers.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-10-22 10:51:10 +02:00
David Howells 7d12e780e0 IRQ: Maintain regs pointer globally rather than passing to IRQ handlers
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:10:12 +01:00
Ville Syrjala 679e28eef8 [ALSA] es1968: Fix hw volume
Fix maestro2 hardware volume control. Tested on a Dell Inspiron 7000.

Signed-off-by: Ville Syrjala <syrjala@sci.fi>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-09-23 10:45:53 +02:00
Takashi Iwai f40b68903c [ALSA] Fix section mismatch errors in ALSA PCI drivers
Fixed 'section mismatch' errors in ALSA PCI drivers:
- removed invalid __devinitdata from pci id tables
- fix/remove __devinit of functions called in suspend/resume

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@suse.cz>
2006-07-12 20:08:01 +02:00
Thomas Gleixner 65ca68b300 [PATCH] irq-flags: sound: Use the new IRQF_ constants
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Jaroslav Kysela <perex@suse.cz>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-02 13:58:54 -07:00
Takashi Iwai 302e4c2f9e [ALSA] Change an arugment of snd_mpu401_uart_new() to bit flags
Change the 5th argument of snd_mpu401_uart_new() to bit flags
instead of a boolean.  The argument takes bits that consist of
MPU401_INFO_XXX flags.
The callers that used the value 1 there are replaced with
MPU401_INFO_INTEGRATED.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-06-22 21:33:56 +02:00
Takashi Iwai 6581f4e74d [ALSA] Remove zero-initialization of static variables
Removed zero-initializations of static variables.
A tiny optimization.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2006-06-22 21:33:45 +02:00