Граф коммитов

11 Коммитов

Автор SHA1 Сообщение Дата
Torstein Hegge e6135fe960 ALSA: usb-audio: proc: use found syncmaxsize to determine feedback format
freqshift is only set for the data endpoint and syncmaxsize is only set
for the sync endpoint. This results in a syncmaxsize of zero used in the
proc output feedback format calculation, which gives a feedback format
incorrectly shown as 8.16 for UAC2 devices.

As neither the data nor the sync endpoint gives all the relevant
content, output the two combined.

Also remove the sync_endpoint "packet size" which is always zero
and the sync_endpoint "momentary freq" which is constant.

Tested with UAC2 async and UAC1 adaptive, not tested with UAC1 async.

Reported-by: B. Zhang <bb.zhang@free.fr>
Signed-off-by: Torstein Hegge <hegge@resisty.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-05-17 08:05:34 +02:00
Eldad Zack 74c34ca1cc ALSA: pcm_format_to_bits strong-typed conversion
Add a function to handle conversion from snd_pcm_format_t
to bitwise with proper typing.

Change such conversions to use this function and silence sparse
warnings.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-29 13:36:15 +02:00
Eldad Zack 88766f04c4 ALSA: usb-audio: convert list_for_each to entry variant
Change occurances of list_for_each into list_for_each_entry where
applicable.

Signed-off-by: Eldad Zack <eldad@fogrefinery.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2013-04-04 08:30:06 +02:00
Takashi Iwai 978520b75f ALSA: usb-audio: Fix races at disconnection
Close some races at disconnection of a USB audio device by adding the
chip->shutdown_mutex and chip->shutdown check at appropriate places.

The spots to put bandaids are:
- PCM prepare, hw_params and hw_free
- where the usb device is accessed for communication or get speed, in
 mixer.c and others; the device speed is now cached in subs->speed
 instead of accessing to chip->dev

The accesses in PCM open and close don't need the mutex protection
because these are already handled in the core PCM disconnection code.

The autosuspend/autoresume codes are still uncovered by this patch
because of possible mutex deadlocks.  They'll be covered by the
upcoming change to rwsem.

Also the mixer codes are untouched, too.  These will be fixed in
another patch, too.

Reported-by: Matthieu CASTET <matthieu.castet@parrot.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-10-30 11:06:54 +01:00
Daniel Mack c89a5d9cac ALSA: snd-usb: remove refactorization left-overs
Drop some struct members and definitions that became obsolete during
the refactorization of the driver.

Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-21 17:40:28 +02:00
Takashi Iwai 22026c1a7b ALSA: usb: Remove obsoleted fields from struct snd_usb_substream
Many fields have been moved to struct snd_usb_endpoint.
Also fix the proc output to correspond to the new structure.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2012-04-13 12:57:39 +02:00
Clemens Ladisch 89e1e66d6b ALSA: usb-audio: automatically detect feedback format
There are two USB Audio Class specifications (v1 and v2), but neither of
them clearly defines the feedback format for high-speed UAC v1 devices.
Add to this whatever the Creative and M-Audio firmware writers have been
smoking, and it becomes impossible to predict the exact feedback format
used by a particular device.

Therefore, automatically detect the feedback format by looking at the
magnitude of the first received feedback value.

Also, this allows us to get rid of some special cases for E-Mu devices.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-10-27 09:17:41 +02:00
Paul Zimmerman 4f4e8f6989 ALSA: usb: USB3 SuperSpeed sound support
This is V2 of the patch, after feedback from Clemens and Daniel.

This patch adds SuperSpeed support to the USB drivers under sound/. It adds
tests for USB_SPEED_SUPER to the appropriate places that check for the USB
speed.

This patch has been tested with our SS USB3 device emulating a set of Yamaha
speakers and a Logitech microphone, but with the descriptors modified to add
USB3 support. It has also been tested with the real speakers and microphone,
to make sure that USB2 devices still work.

Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Cc: Clemens Ladisch <clemens@ladisch.de>
Cc: Daniel Mack <daniel@caiaq.de>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-08-14 10:30:08 +02:00
Clemens Ladisch 015eb0b081 ALSA: usb-audio: use a format bitmask per alternate setting
In preparation for USB audio 2.0 support, change the audioformat
structure so that it uses a bitmask to specify possible formats.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-05 08:18:32 +01:00
Clemens Ladisch e11b4e0e4f ALSA: usb-audio: rename substream format field to altset_idx
The snd_usb_substream::format field actually contains the index of the
current alternate setting, so rename it to altset_idx to avoid
confusion.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-05 08:18:07 +01:00
Daniel Mack e5779998bf ALSA: usb-audio: refactor code
Clean up the usb audio driver by factoring out a lot of functions to
separate files. Code for procfs, quirks, urbs, format parsers etc all
got a new home now.

Moved almost all special quirk handling to quirks.c and introduced new
generic functions to handle them, so the exceptions do not pollute the
whole driver.

Renamed usbaudio.c to card.c because this is what it actually does now.
Renamed usbmidi.c to midi.c for namespace clarity.
Removed more things from usbaudio.h.

The non-standard drivers were adopted accordingly.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Cc: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2010-03-05 08:17:14 +01:00