Граф коммитов

56 Коммитов

Автор SHA1 Сообщение Дата
Linus Torvalds 5bf7a6503f Merge branch 'fixes-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq
* 'fixes-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: note the nested NOT_RUNNING test in worker_clr_flags() isn't a noop
  workqueue: relax lockdep annotation on flush_work()
2011-01-21 13:38:57 -08:00
Tejun Heo 2ce802f62b lockdep: Move early boot local IRQ enable/disable status to init/main.c
During early boot, local IRQ is disabled until IRQ subsystem is
properly initialized.  During this time, no one should enable
local IRQ and some operations which usually are not allowed with
IRQ disabled, e.g. operations which might sleep or require
communications with other processors, are allowed.

lockdep tracked this with early_boot_irqs_off/on() callbacks.
As other subsystems need this information too, move it to
init/main.c and make it generally available.  While at it,
toggle the boolean to early_boot_irqs_disabled instead of
enabled so that it can be initialized with %false and %true
indicates the exceptional condition.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <20110120110635.GB6036@htj.dyndns.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-20 13:32:33 +01:00
Tejun Heo e159489baa workqueue: relax lockdep annotation on flush_work()
Currently, the lockdep annotation in flush_work() requires exclusive
access on the workqueue the target work is queued on and triggers
warning if a work is trying to flush another work on the same
workqueue; however, this is no longer true as workqueues can now
execute multiple works concurrently.

This patch adds lock_map_acquire_read() and make process_one_work()
hold read access to the workqueue while executing a work and
start_flush_work() check for write access if concurrnecy level is one
or the workqueue has a rescuer (as only one execution resource - the
rescuer - is guaranteed to be available under memory pressure), and
read access if higher.

This better represents what's going on and removes spurious lockdep
warnings which are triggered by fake dependency chain created through
flush_work().

* Peter pointed out that flushing another work from a WQ_MEM_RECLAIM
  wq breaks forward progress guarantee under memory pressure.
  Condition check accordingly updated.

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Tested-by: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: stable@kernel.org
2011-01-11 15:33:01 +01:00
Linus Torvalds 4a60cfa945 Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (96 commits)
  apic, x86: Use BIOS settings for IBS and MCE threshold interrupt LVT offsets
  apic, x86: Check if EILVT APIC registers are available (AMD only)
  x86: ioapic: Call free_irte only if interrupt remapping enabled
  arm: Use ARCH_IRQ_INIT_FLAGS
  genirq, ARM: Fix boot on ARM platforms
  genirq: Fix CONFIG_GENIRQ_NO_DEPRECATED=y build
  x86: Switch sparse_irq allocations to GFP_KERNEL
  genirq: Switch sparse_irq allocator to GFP_KERNEL
  genirq: Make sparse_lock a mutex
  x86: lguest: Use new irq allocator
  genirq: Remove the now unused sparse irq leftovers
  genirq: Sanitize dynamic irq handling
  genirq: Remove arch_init_chip_data()
  x86: xen: Sanitise sparse_irq handling
  x86: Use sane enumeration
  x86: uv: Clean up the direct access to irq_desc
  x86: Make io_apic.c local functions static
  genirq: Remove irq_2_iommu
  x86: Speed up the irq_remapped check in hot pathes
  intr_remap: Simplify the code further
  ...

Fix up trivial conflicts in arch/x86/Kconfig
2010-10-21 14:11:46 -07:00
Hitoshi Mitake 620162505e lockdep: Add improved subclass caching
Current lockdep_map only caches one class with subclass == 0,
and looks up hash table of classes when subclass != 0.

It seems that this has no problem because the case of
subclass != 0 is rare. But locks of struct rq are
acquired with subclass == 1 when task migration is executed.
Task migration is high frequent event, so I modified lockdep
to cache subclasses.

I measured the score of perf bench sched messaging.
This patch has slightly but certain (order of milli seconds
or 10 milli seconds) effect when lots of tasks are running.
I'll show the result in the tail of this description.

NR_LOCKDEP_CACHING_CLASSES specifies how many classes can be
cached in the instances of lockdep_map.
I discussed with Peter Zijlstra in LinuxCon Japan about
this approach and he taught me that caching every subclasses(8)
is cleary waste of memory. So number of cached classes
should be configurable.

=== Score comparison of benchmarks ===
# "min" means best score, and "max" means worst score

for i in `seq 1 10`; do ./perf bench -f simple sched messaging; done

before: min: 0.565000, max: 0.583000, avg: 0.572500
after:  min: 0.559000, max: 0.568000, avg: 0.563300

# with more processes
for i in `seq 1 10`; do ./perf bench -f simple sched messaging -g 40; done

before: min: 2.274000, max: 2.298000, avg: 2.286300
after:  min: 2.242000, max: 2.270000, avg: 2.259700

Signed-off-by: Hitoshi Mitake <mitake@dcl.info.waseda.ac.jp>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1286269311-28336-2-git-send-email-mitake@dcl.info.waseda.ac.jp>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-10-18 18:44:25 +02:00
Thomas Gleixner 154cd387cd genirq: Remove early_init_irq_lock_class()
early_init_irq_lock_class() is called way before anything touches the
irq descriptors. In case of SPARSE_IRQ=y this is a NOP operation
because the radix tree is empty at this point. For the SPARSE_IRQ=n
case it's sufficient to set the lock class in early_init_irq(). 

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Ingo Molnar <mingo@elte.hu>
2010-10-12 16:39:06 +02:00
Peter Zijlstra 1704f47b50 lockdep: Add novalidate class for dev->mutex conversion
The conversion of device->sem to device->mutex resulted in lockdep
warnings. Create a novalidate class for now until the driver folks
come up with separate classes. That way we have at least the basic
mutex debugging coverage.

Add a checkpatch error so the usage is reserved for device->mutex.

[ tglx: checkpatch and compile fix for LOCKDEP=n ]

Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-05-21 09:37:30 -07:00
Dave Young 2edf5e4980 sysctl extern cleanup: lockdep
Extern declarations in sysctl.c should be moved to their own header file,
and then include them in relavant .c files.

Move lockdep extern declarations to linux/lockdep.h

Signed-off-by: Dave Young <hidave.darkstar@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-03-12 15:53:10 -08:00
Paul E. McKenney 0632eb3d75 rcu: Integrate rcu_dereference_check() message into lockdep
Make rcu_dereference_check() print the list of held locks in
addition to the stack dump to ease debugging.

Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: laijs@cn.fujitsu.com
Cc: dipankar@in.ibm.com
Cc: mathieu.desnoyers@polymtl.ca
Cc: josh@joshtriplett.org
Cc: dvhltc@us.ibm.com
Cc: niv@us.ibm.com
Cc: peterz@infradead.org
Cc: rostedt@goodmis.org
Cc: Valdis.Kletnieks@vt.edu
Cc: dhowells@redhat.com
LKML-Reference: <1266887105-1528-3-git-send-email-paulmck@linux.vnet.ibm.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-02-25 09:41:01 +01:00
Ming Lei e351b660fd lockdep: Reintroduce generation count to make BFS faster
We still can apply DaveM's generation count optimization to
BFS, based on the following idea:

 - before doing each BFS, increase the global generation id
   by 1

 - if one node in the graph has been visited, mark it as
   visited by storing the current global generation id into
   the node's dep_gen_id field

 - so we can decide if one node has been visited already, by
   comparing the node's dep_gen_id with the global generation id.

By applying DaveM's generation count optimization to current
implementation of BFS, we gain the following advantages:

 - we save MAX_LOCKDEP_ENTRIES/8 bytes memory;

 - we remove the bitmap_zero(bfs_accessed, MAX_LOCKDEP_ENTRIES);
   in each BFS, which is very time-consuming since
   MAX_LOCKDEP_ENTRIES may be very large.(16384UL)

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: "David S. Miller" <davem@davemloft.net>
LKML-Reference: <1248274089-6358-1-git-send-email-tom.leiming@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-02 15:41:37 +02:00
Peter Zijlstra bb97a91e25 lockdep: Deal with many similar locks
spin_lock_nest_lock() allows to take many instances of the same
class, this can easily lead to overflow of MAX_LOCK_DEPTH.

To avoid this overflow, we'll stop accounting instances but
start reference counting the class in the held_lock structure.

[ We could maintain a list of instances, if we'd move the hlock
  stuff into __lock_acquired(), but that would require
  significant modifications to the current code. ]

We restrict this mode to spin_lock_nest_lock() only, because it
degrades the lockdep quality due to lost of instance.

For lockstat this means we don't track lock statistics for any
but the first lock in the series.

Currently nesting is limited to 11 bits because that was the
spare space available in held_lock. This yields a 2048
instances maximium.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-02 15:41:35 +02:00
Peter Zijlstra f607c66857 lockdep: Introduce lockdep_assert_held()
Add a lockdep helper to validate that we indeed are the owner
of a lock.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-08-02 15:41:34 +02:00
Peter Zijlstra af01296145 lockdep: BFS cleanup
Some cleanups of the lockdep code after the BFS series:

 - Remove the last traces of the generation id
 - Fixup comment style
 - Move the bfs routines into lockdep.c
 - Cleanup the bfs routines

[ tom.leiming@gmail.com: Fix crash ]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1246201486-7308-11-git-send-email-tom.leiming@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-24 10:53:29 +02:00
Ming Lei c94aa5ca30 lockdep: Print the shortest dependency chain if finding a circle
Currently lockdep will print the 1st circle detected if it
exists when acquiring a new (next) lock.

This patch prints the shortest path from the next lock to be
acquired to the previous held lock if a circle is found.

The patch still uses the current method to check circle, and
once the circle is found, breadth-first search algorithem is
used to compute the shortest path from the next lock to the
previous lock in the forward lock dependency graph.

Printing the shortest path will shorten the dependency chain,
and make troubleshooting for possible circular locking easier.

Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1246201486-7308-2-git-send-email-tom.leiming@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-07-24 10:49:44 +02:00
Jan Kara 9a7aa12f39 vfs: Set special lockdep map for dirs only if not set by fs
Some filesystems need to set lockdep map for i_mutex differently for
different directories. For example OCFS2 has system directories (for
orphan inode tracking and for gathering all system files like journal
or quota files into a single place) which have different locking
locking rules than standard directories. For a filesystem setting
lockdep map is naturaly done when the inode is read but we have to
modify unlock_new_inode() not to overwrite the lockdep map the filesystem
has set.

Acked-by: peterz@infradead.org
CC: mingo@redhat.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Joel Becker <joel.becker@oracle.com>
2009-06-22 14:34:22 -07:00
Robin Holt e8c158bb31 Factor out #ifdefs from kernel/spinlock.c to LOCK_CONTENDED_FLAGS
SGI has observed that on large systems, interrupts are not serviced for a
long period of time when waiting for a rwlock.  The following patch series
re-enables irqs while waiting for the lock, resembling the code which is
already there for spinlocks.

I only made the ia64 version, because the patch adds some overhead to the
fast path.  I assume there is currently no demand to have this for other
architectures, because the systems are not so large.  Of course, the
possibility to implement raw_{read|write}_lock_flags for any architecture
is still there.

This patch:

The new macro LOCK_CONTENDED_FLAGS expands to the correct implementation
depending on the config options, so that IRQ's are re-enabled when
possible, but they remain disabled if CONFIG_LOCKDEP is set.

Signed-off-by: Petr Tesarik <ptesarik@suse.cz>
Signed-off-by: Robin Holt <holt@sgi.com>
Cc: <linux-arch@vger.kernel.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-02 19:05:10 -07:00
Peter Zijlstra 9851673bc3 lockdep: move state bit definitions around
For convenience later.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-14 23:27:59 +01:00
Peter Zijlstra a652d7081b lockdep: sanitize reclaim bit names
s/HELD_OVER/ENABLED/g

so that its similar to the hard and soft-irq names.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-14 23:27:52 +01:00
Peter Zijlstra 4fc95e867f lockdep: sanitize bit names
s/\(LOCKF\?_ENABLED_[^ ]*\)S\(_READ\)\?\>/\1\2/g

So that the USED_IN and ENABLED have the same names.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-14 23:27:51 +01:00
Nick Piggin cf40bd16fd lockdep: annotate reclaim context (__GFP_NOFS)
Here is another version, with the incremental patch rolled up, and
added reclaim context annotation to kswapd, and allocation tracing
to slab allocators (which may only ever reach the page allocator
in rare cases, so it is good to put annotations here too).

Haven't tested this version as such, but it should be getting closer
to merge worthy ;)

--
After noticing some code in mm/filemap.c accidentally perform a __GFP_FS
allocation when it should not have been, I thought it might be a good idea to
try to catch this kind of thing with lockdep.

I coded up a little idea that seems to work. Unfortunately the system has to
actually be in __GFP_FS page reclaim, then take the lock, before it will mark
it. But at least that might still be some orders of magnitude more common
(and more debuggable) than an actual deadlock condition, so we have some
improvement I hope (the concept is no less complete than discovery of a lock's
interrupt contexts).

I guess we could even do the same thing with __GFP_IO (normal reclaim), and
even GFP_NOIO locks too... but filesystems will have the most locks and fiddly
code paths, so let's start there and see how it goes.

It *seems* to work. I did a quick test.

=================================
[ INFO: inconsistent lock state ]
2.6.28-rc6-00007-ged31348-dirty #26
---------------------------------
inconsistent {in-reclaim-W} -> {ov-reclaim-W} usage.
modprobe/8526 [HC0[0]:SC0[0]:HE1:SE1] takes:
 (testlock){--..}, at: [<ffffffffa0020055>] brd_init+0x55/0x216 [brd]
{in-reclaim-W} state was registered at:
  [<ffffffff80267bdb>] __lock_acquire+0x75b/0x1a60
  [<ffffffff80268f71>] lock_acquire+0x91/0xc0
  [<ffffffff8070f0e1>] mutex_lock_nested+0xb1/0x310
  [<ffffffffa002002b>] brd_init+0x2b/0x216 [brd]
  [<ffffffff8020903b>] _stext+0x3b/0x170
  [<ffffffff80272ebf>] sys_init_module+0xaf/0x1e0
  [<ffffffff8020c3fb>] system_call_fastpath+0x16/0x1b
  [<ffffffffffffffff>] 0xffffffffffffffff
irq event stamp: 3929
hardirqs last  enabled at (3929): [<ffffffff8070f2b5>] mutex_lock_nested+0x285/0x310
hardirqs last disabled at (3928): [<ffffffff8070f089>] mutex_lock_nested+0x59/0x310
softirqs last  enabled at (3732): [<ffffffff8061f623>] sk_filter+0x83/0xe0
softirqs last disabled at (3730): [<ffffffff8061f5b6>] sk_filter+0x16/0xe0

other info that might help us debug this:
1 lock held by modprobe/8526:
 #0:  (testlock){--..}, at: [<ffffffffa0020055>] brd_init+0x55/0x216 [brd]

stack backtrace:
Pid: 8526, comm: modprobe Not tainted 2.6.28-rc6-00007-ged31348-dirty #26
Call Trace:
 [<ffffffff80265483>] print_usage_bug+0x193/0x1d0
 [<ffffffff80266530>] mark_lock+0xaf0/0xca0
 [<ffffffff80266735>] mark_held_locks+0x55/0xc0
 [<ffffffffa0020000>] ? brd_init+0x0/0x216 [brd]
 [<ffffffff802667ca>] trace_reclaim_fs+0x2a/0x60
 [<ffffffff80285005>] __alloc_pages_internal+0x475/0x580
 [<ffffffff8070f29e>] ? mutex_lock_nested+0x26e/0x310
 [<ffffffffa0020000>] ? brd_init+0x0/0x216 [brd]
 [<ffffffffa002006a>] brd_init+0x6a/0x216 [brd]
 [<ffffffffa0020000>] ? brd_init+0x0/0x216 [brd]
 [<ffffffff8020903b>] _stext+0x3b/0x170
 [<ffffffff8070f8b9>] ? mutex_unlock+0x9/0x10
 [<ffffffff8070f83d>] ? __mutex_unlock_slowpath+0x10d/0x180
 [<ffffffff802669ec>] ? trace_hardirqs_on_caller+0x12c/0x190
 [<ffffffff80272ebf>] sys_init_module+0xaf/0x1e0
 [<ffffffff8020c3fb>] system_call_fastpath+0x16/0x1b

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-02-14 23:27:49 +01:00
Linus Torvalds 179475a3b4 Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  x86, sparseirq: clean up Kconfig entry
  x86: turn CONFIG_SPARSE_IRQ off by default
  sparseirq: fix numa_migrate_irq_desc dependency and comments
  sparseirq: add kernel-doc notation for new member in irq_desc, -v2
  locking, irq: enclose irq_desc_lock_class in CONFIG_LOCKDEP
  sparseirq, xen: make sure irq_desc is allocated for interrupts
  sparseirq: fix !SMP building, #2
  x86, sparseirq: move irq_desc according to smp_affinity, v7
  proc: enclose desc variable of show_stat() in CONFIG_SPARSE_IRQ
  sparse irqs: add irqnr.h to the user headers list
  sparse irqs: handle !GENIRQ platforms
  sparseirq: fix !SMP && !PCI_MSI && !HT_IRQ build
  sparseirq: fix Alpha build failure
  sparseirq: fix typo in !CONFIG_IO_APIC case
  x86, MSI: pass irq_cfg and irq_desc
  x86: MSI start irq numbering from nr_irqs_gsi
  x86: use NR_IRQS_LEGACY
  sparse irq_desc[] array: core kernel and x86 changes
  genirq: record IRQ_LEVEL in irq_desc[]
  irq.h: remove padding from irq_desc on 64bits
2008-12-30 16:20:19 -08:00
KOSAKI Motohiro 74c8a61304 locking, irq: enclose irq_desc_lock_class in CONFIG_LOCKDEP
Impact: simplify code

commit "08678b0: generic: sparse irqs: use irq_desc() [...]" introduced
the irq_desc_lock_class variable.

But it is used only if CONFIG_SPARSE_IRQ=Y or CONFIG_TRACE_IRQFLAGS=Y.
Otherwise, following warnings happen:

	CC      kernel/irq/handle.o
	kernel/irq/handle.c:26: warning: 'irq_desc_lock_class' defined but not used

Actually, current early_init_irq_lock_class has a bit strange and messy ifdef.
In addition, it is not valueable.

1. this function is protected by !CONFIG_SPARSE_IRQ, but that is not necessary.
   if CONFIG_SPARSE_IRQ=Y, desc of all irq number are initialized by NULL
   at first - then this function calling is safe.

2. this function protected by CONFIG_TRACE_IRQFLAGS too. but it is not
   necessary either, because lockdep_set_class() doesn't have bad side
   effect even if CONFIG_TRACE_IRQFLAGS=n.

This patch bloat kernel size a bit on CONFIG_TRACE_IRQFLAGS=n and
CONFIG_SPARSE_IRQ=Y - but that's ok. early_init_irq_lock_class() is not
a fastpatch at all.

To avoid messy ifdefs is more important than a few bytes diet.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-18 14:35:53 +01:00
Peter Zijlstra 00ef9f7348 lockdep: change a held lock's class
Impact: introduce new lockdep API

Allow to change a held lock's class. Basically the same as the existing
code to change a subclass therefore reuse all that.

The XFS code will be able to use this to annotate their inode locking.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-12-04 10:08:18 +01:00
Ingo Molnar e8f6fbf62d lockdep: include/linux/lockdep.h - fix warning in net/bluetooth/af_bluetooth.c
fix this warning:

  net/bluetooth/af_bluetooth.c:60: warning: ‘bt_key_strings’ defined but not used
  net/bluetooth/af_bluetooth.c:71: warning: ‘bt_slock_key_strings’ defined but not used

this is a lockdep macro problem in the !LOCKDEP case.

We cannot convert it to an inline because the macro works on multiple types,
but we can mark the parameter used.

[ also clean up a misaligned tab in sock_lock_init_class_and_name() ]

[ also remove #ifdefs from around af_family_clock_key strings - which
  were certainly added to get rid of the ugly build warnings. ]

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: David S. Miller <davem@davemloft.net>
2008-11-13 23:19:10 -08:00
Ingo Molnar e25cf3db56 lockdep: include/linux/lockdep.h - fix warning in net/bluetooth/af_bluetooth.c
fix this warning:

  net/bluetooth/af_bluetooth.c:60: warning: ‘bt_key_strings’ defined but not used
  net/bluetooth/af_bluetooth.c:71: warning: ‘bt_slock_key_strings’ defined but not used

this is a lockdep macro problem in the !LOCKDEP case.

We cannot convert it to an inline because the macro works on multiple types,
but we can mark the parameter used.

[ also clean up a misaligned tab in sock_lock_init_class_and_name() ]

[ also remove #ifdefs from around af_family_clock_key strings - which
  were certainly added to get rid of the ugly build warnings. ]

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-11-12 12:39:40 +01:00
Peter Zijlstra c7e78cff6b lockstat: contend with points
We currently only provide points that have to wait on contention, also
lists the points we have to wait for.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-10-20 15:43:10 +02:00
Peter Zijlstra 76b189e918 lockdep: add might_lock() / might_lock_read()
useful to establish a lock dependency in case the actual dependency is
rare or hard to trigger.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-10 13:48:49 +02:00
Ingo Molnar e5f363e358 lockdep: increase MAX_LOCKDEP_KEYS
certain configs produce:

 [   70.076229] BUG: MAX_LOCKDEP_KEYS too low!
 [   70.080230] turning off the locking correctness validator.

tune them up.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-11 15:25:07 +02:00
Peter Zijlstra b42e737e57 lockdep: fix overflow in the hlock shrinkage code
There is a overflow by 1 case in the new shrunken hlock code.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-11 12:34:42 +02:00
Ingo Molnar 3295f0ef9f lockdep: rename map_[acquire|release]() => lock_map_[acquire|release]()
the names were too generic:

 drivers/uio/uio.c:87: error: expected identifier or '(' before 'do'
 drivers/uio/uio.c:87: error: expected identifier or '(' before 'while'
 drivers/uio/uio.c:113: error: 'map_release' undeclared here (not in a function)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-11 10:30:30 +02:00
Peter Zijlstra b7d39aff91 lockdep: spin_lock_nest_lock()
Expose the new lock protection lock.

This can be used to annotate places where we take multiple locks of the
same class and avoid deadlocks by always taking another (top-level) lock
first.

NOTE: we're still bound to the MAX_LOCK_DEPTH (48) limit.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-11 09:30:24 +02:00
Peter Zijlstra 7531e2f34d lockdep: lock protection locks
On Fri, 2008-08-01 at 16:26 -0700, Linus Torvalds wrote:

> On Fri, 1 Aug 2008, David Miller wrote:
> >
> > Taking more than a few locks of the same class at once is bad
> > news and it's better to find an alternative method.
>
> It's not always wrong.
>
> If you can guarantee that anybody that takes more than one lock of a
> particular class will always take a single top-level lock _first_, then
> that's all good. You can obviously screw up and take the same lock _twice_
> (which will deadlock), but at least you cannot get into ABBA situations.
>
> So maybe the right thing to do is to just teach lockdep about "lock
> protection locks". That would have solved the multi-queue issues for
> networking too - all the actual network drivers would still have taken
> just their single queue lock, but the one case that needs to take all of
> them would have taken a separate top-level lock first.
>
> Never mind that the multi-queue locks were always taken in the same order:
> it's never wrong to just have some top-level serialization, and anybody
> who needs to take <n> locks might as well do <n+1>, because they sure as
> hell aren't going to be on _any_ fastpaths.
>
> So the simplest solution really sounds like just teaching lockdep about
> that one special case. It's not "nesting" exactly, although it's obviously
> related to it.

Do as Linus suggested. The lock protection lock is called nest_lock.

Note that we still have the MAX_LOCK_DEPTH (48) limit to consider, so anything
that spills that it still up shit creek.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-11 09:30:24 +02:00
Peter Zijlstra 4f3e7524b2 lockdep: map_acquire
Most the free-standing lock_acquire() usages look remarkably similar, sweep
them into a new helper.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-11 09:30:23 +02:00
Dave Jones f82b217e35 lockdep: shrink held_lock structure
struct held_lock {
        u64                        prev_chain_key;       /*     0     8 */
        struct lock_class *        class;                /*     8     8 */
        long unsigned int          acquire_ip;           /*    16     8 */
        struct lockdep_map *       instance;             /*    24     8 */
        int                        irq_context;          /*    32     4 */
        int                        trylock;              /*    36     4 */
        int                        read;                 /*    40     4 */
        int                        check;                /*    44     4 */
        int                        hardirqs_off;         /*    48     4 */

        /* size: 56, cachelines: 1 */
        /* padding: 4 */
        /* last cacheline: 56 bytes */
};

struct held_lock {
        u64                        prev_chain_key;       /*     0     8 */
        long unsigned int          acquire_ip;           /*     8     8 */
        struct lockdep_map *       instance;             /*    16     8 */
        unsigned int               class_idx:11;         /*    24:21  4 */
        unsigned int               irq_context:2;        /*    24:19  4 */
        unsigned int               trylock:1;            /*    24:18  4 */
        unsigned int               read:2;               /*    24:16  4 */
        unsigned int               check:2;              /*    24:14  4 */
        unsigned int               hardirqs_off:1;       /*    24:13  4 */

        /* size: 32, cachelines: 1 */
        /* padding: 4 */
        /* bit_padding: 13 bits */
        /* last cacheline: 32 bytes */
};

[mingo@elte.hu: shrunk hlock->class too]
[peterz@infradead.org: fixup bit sizes]
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
2008-08-11 09:30:23 +02:00
Peter Zijlstra 64aa348edc lockdep: lock_set_subclass - reset a held lock's subclass
this can be used to reset a held lock's subclass, for arbitrary-depth
iterated data structures such as trees or lists which have per-node
locks.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-08-11 09:30:21 +02:00
David Miller 419ca3f135 lockdep: fix combinatorial explosion in lock subgraph traversal
When we traverse the graph, either forwards or backwards, we
are interested in whether a certain property exists somewhere
in a node reachable in the graph.

Therefore it is never necessary to traverse through a node more
than once to get a correct answer to the given query.

Take advantage of this property using a global ID counter so that we
need not clear all the markers in all the lock_class entries before
doing a traversal.  A new ID is choosen when we start to traverse, and
we continue through a lock_class only if it's ID hasn't been marked
with the new value yet.

This short-circuiting is essential especially for high CPU count
systems.  The scheduler has a runqueue per cpu, and needs to take
two runqueue locks at a time, which leads to long chains of
backwards and forwards subgraphs from these runqueue lock nodes.
Without the short-circuit implemented here, a graph traversal on
a runqueue lock can take up to (1 << (N - 1)) checks on a system
with N cpus.

For anything more than 16 cpus or so, lockdep will eventually bring
the machine to a complete standstill.

Signed-off-by: David S. Miller <davem@davemloft.net>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-07-31 18:38:28 +02:00
Li Zefan a033c332e0 lockdep: remove duplicate definition of STATIC_LOCKDEP_MAP_INIT
STATIC_LOCKDEP_MAP_INIT is defined twice in lockdep.h. I guess
it's a copy & paste.

Signed-off-by: Li Zefan <lizf@cn.fujitsu.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-24 13:43:07 +02:00
Huang, Ying 443cd507ce lockdep: add lock_class information to lock_chain and output it
This patch records array of lock_class into lock_chain, and export
lock_chain information via /proc/lockdep_chains.

It is based on x86/master branch of git-x86 tree, and has been tested
on x86_64 platform.

Signed-off-by: Huang Ying <ying.huang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-06-20 12:21:33 +02:00
Johannes Berg 4e6045f134 workqueue: debug flushing deadlocks with lockdep
In the following scenario:

code path 1:
  my_function() -> lock(L1); ...; flush_workqueue(); ...

code path 2:
  run_workqueue() -> my_work() -> ...; lock(L1); ...

you can get a deadlock when my_work() is queued or running
but my_function() has acquired L1 already.

This patch adds a pseudo-lock to each workqueue to make lockdep
warn about this scenario.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Oleg Nesterov <oleg@tv-sign.ru>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19 11:53:38 -07:00
Peter Zijlstra 851a67b825 lockdep: annotate rcu_read_{,un}lock{,_bh}
lockdep annotate rcu_read_{,un}lock{,_bh} in order to catch imbalanced
usage.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2007-10-11 22:11:12 +02:00
Peter Zijlstra b351d164e8 lockdep: syscall exit check
Provide a check to validate that we do not hold any locks when switching
back to user-space.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2007-10-11 22:11:12 +02:00
Peter Zijlstra 96645678cd lockstat: measure lock bouncing
__acquire
        |
       lock _____
        |        \
        |    __contended
        |         |
        |        wait
        | _______/
        |/
        |
   __acquired
        |
   __release
        |
     unlock

We measure acquisition and contention bouncing.

This is done by recording a cpu stamp in each lock instance.

Contention bouncing requires the cpu stamp to be set on acquisition. Hence we
move __acquired into the generic path.

__acquired is then used to measure acquisition bouncing by comparing the
current cpu with the old stamp before replacing it.

__contended is used to measure contention bouncing (only useful for preemptable
locks)

[akpm@linux-foundation.org: cleanups]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:49 -07:00
Peter Zijlstra 4b32d0a4e9 lockdep: various fixes
- update the copyright notices
 - use the default hash function
 - fix a thinko in a BUILD_BUG_ON
 - add a WARN_ON to spot inconsitent naming
 - fix a termination issue in /proc/lock_stat

[akpm@linux-foundation.org: cleanups]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:49 -07:00
Peter Zijlstra f20786ff4d lockstat: core infrastructure
Introduce the core lock statistics code.

Lock statistics provides lock wait-time and hold-time (as well as the count
of corresponding contention and acquisitions events). Also, the first few
call-sites that encounter contention are tracked.

Lock wait-time is the time spent waiting on the lock. This provides insight
into the locking scheme, that is, a heavily contended lock is indicative of
a too coarse locking scheme.

Lock hold-time is the duration the lock was held, this provides a reference for
the wait-time numbers, so they can be put into perspective.

  1)
    lock
  2)
    ... do stuff ..
    unlock
  3)

The time between 1 and 2 is the wait-time. The time between 2 and 3 is the
hold-time.

The lockdep held-lock tracking code is reused, because it already collects locks
into meaningful groups (classes), and because it is an existing infrastructure
for lock instrumentation.

Currently lockdep tracks lock acquisition with two hooks:

  lock()
    lock_acquire()
    _lock()

 ... code protected by lock ...

  unlock()
    lock_release()
    _unlock()

We need to extend this with two more hooks, in order to measure contention.

  lock_contended() - used to measure contention events
  lock_acquired()  - completion of the contention

These are then placed the following way:

  lock()
    lock_acquire()
    if (!_try_lock())
      lock_contended()
      _lock()
      lock_acquired()

 ... do locked stuff ...

  unlock()
    lock_release()
    _unlock()

(Note: the try_lock() 'trick' is used to avoid instrumenting all platform
       dependent lock primitive implementations.)

It is also possible to toggle the two lockdep features at runtime using:

  /proc/sys/kernel/prove_locking
  /proc/sys/kernel/lock_stat

(esp. turning off the O(n^2) prove_locking functionaliy can help)

[akpm@linux-foundation.org: build fixes]
[akpm@linux-foundation.org: nuke unneeded ifdefs]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Jason Baron <jbaron@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-19 10:04:49 -07:00
Jarek Poplawski e3a55fd18d [PATCH] lockdep: lockdep_depth vs. debug_locks
lockdep found a bug during a run of workqueue function - this could be also
caused by a bug from other code running simultaneously.

lockdep really shouldn't be used when debug_locks == 0!

Reported-by: Folkert van Heusden <folkert@vanheusden.com>
Inspired-by: Oleg Nesterov <oleg@tv-sign.ru>
Signed-off-by: Jarek Poplawski <jarkao2@o2.pl>
Cc: Ingo Molnar <mingo@elte.hu>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-22 19:39:06 -07:00
Heiko Carstens a1e96b0310 [PATCH] lockdep: forward declare struct task_struct
3117df0453 causes this:

In file included from arch/s390/kernel/early.c:13:
include/linux/lockdep.h:300: warning:
		"struct task_struct" declared inside parameter list
include/linux/lockdep.h:300:
		warning: its scope is only this definition or
		declaration, which is probably not what you want

Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-12 09:48:29 -08:00
Jason Baron 068135e635 [PATCH] lockdep: add graph depth information to /proc/lockdep
Generate locking graph information into /proc/lockdep, for lock hierarchy
documentation and visualization purposes.

sample output:

 c089fd5c OPS:     138 FD:   14 BD:    1 --..: &tty->termios_mutex
  -> [c07a3430] tty_ldisc_lock
  -> [c07a37f0] &port_lock_key
  -> [c07afdc0] &rq->rq_lock_key#2

The lock classes listed are all the first-hop lock dependencies that
lockdep has seen so far.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-11 10:51:26 -08:00
Ingo Molnar 3117df0453 [PATCH] lockdep: print irq-trace info on asserts
When we print an assert due to scheduling-in-atomic bugs, and if lockdep
is enabled, then the IRQ tracing information of lockdep can be printed
to pinpoint the code location that disabled interrupts. This saved me
quite a bit of debugging time in cases where the backtrace did not
identify the irq-disabling site well enough.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-13 09:05:50 -08:00
Adrian Bunk ebe7e5fe4b [PATCH] remove kernel/lockdep.c:lockdep_internal
Remove the no longer used lockdep_internal().

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:39 -08:00
Peter Zijlstra d5abe66917 [PATCH] debug: workqueue locking sanity
Workqueue functions should not leak locks, assert so, printing the
last function ran.

Use macros in lockdep.h to avoid include dependency pains.

[akpm@osdl.org: build fix]
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Acked-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:36 -08:00