Граф коммитов

56 Коммитов

Автор SHA1 Сообщение Дата
tangmeng d772cc2c32 kernel/do_mount_initrd: move real_root_dev sysctls to its own file
kernel/sysctl.c is a kitchen sink where everyone leaves their dirty
dishes, this makes it very difficult to maintain.

To help with this maintenance let's start by moving sysctls to places
where they actually belong.  The proc sysctl maintainers do not want to
know what sysctl knobs you wish to add for your own piece of code, we
just care about the core logic.

All filesystem syctls now get reviewed by fs folks. This commit
follows the commit of fs, move the real_root_dev sysctl to its own file,
kernel/do_mount_initrd.c.

Signed-off-by: tangmeng <tangmeng@uniontech.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
2022-04-06 13:43:44 -07:00
Linus Torvalds e1ec517e18 Merge branch 'hch.init_path' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull init and set_fs() cleanups from Al Viro:
 "Christoph's 'getting rid of ksys_...() uses under KERNEL_DS' series"

* 'hch.init_path' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (50 commits)
  init: add an init_dup helper
  init: add an init_utimes helper
  init: add an init_stat helper
  init: add an init_mknod helper
  init: add an init_mkdir helper
  init: add an init_symlink helper
  init: add an init_link helper
  init: add an init_eaccess helper
  init: add an init_chmod helper
  init: add an init_chown helper
  init: add an init_chroot helper
  init: add an init_chdir helper
  init: add an init_rmdir helper
  init: add an init_unlink helper
  init: add an init_umount helper
  init: add an init_mount helper
  init: mark create_dev as __init
  init: mark console_on_rootfs as __init
  init: initialize ramdisk_execute_command at compile time
  devtmpfs: refactor devtmpfsd()
  ...
2020-08-07 09:40:34 -07:00
Christoph Hellwig 83ff98c3e9 init: add an init_mkdir helper
Add a simple helper to mkdir with a kernel space file name and switch
the early init code over to it.  Remove the now unused ksys_mkdir.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-31 08:17:53 +02:00
Christoph Hellwig 4b7ca5014c init: add an init_chroot helper
Add a simple helper to chroot with a kernel space file name and switch
the early init code over to it.  Remove the now unused ksys_chroot.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-31 08:17:52 +02:00
Christoph Hellwig db63f1e315 init: add an init_chdir helper
Add a simple helper to chdir with a kernel space file name and switch
the early init code over to it.  Remove the now unused ksys_chdir.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-31 08:17:52 +02:00
Christoph Hellwig 8fb9f73e5a init: add an init_unlink helper
Add a simple helper to unlink with a kernel space file name and switch
the early init code over to it.  Remove the now unused ksys_unlink.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-31 08:17:52 +02:00
Christoph Hellwig 09267defa3 init: add an init_umount helper
Like ksys_umount, but takes a kernel pointer for the destination path.
Switch over the umount in the init code, which just happen to work due to
the implicit set_fs(KERNEL_DS) during early init right now.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-31 08:17:51 +02:00
Christoph Hellwig c60166f042 init: add an init_mount helper
Like do_mount, but takes a kernel pointer for the destination path.
Switch over the mounts in the init code and devtmpfs to it, which
just happen to work due to the implicit set_fs(KERNEL_DS) during early
init right now.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2020-07-31 08:17:51 +02:00
Christoph Hellwig 9acc17baf1 initrd: mark initrd support as deprecated
The classic initial ramdisk has been replaced by the much more
flexible and efficient initramfs a long time.  Warn about it being
removed soon.

Includes a spelling fix from Colin Ian King <colin.king@canonical.com>.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-30 08:22:47 +02:00
Christoph Hellwig f0ea68f139 initrd: mark init_linuxrc as __init
Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-30 08:22:47 +02:00
Christoph Hellwig 899ac10cc0 initrd: remove the BLKFLSBUF call in handle_initrd
BLKFLSBUF used to be overloaded for the ramdisk driver to free the whole
ramdisk, which was completely different behavior compared to all other
drivers.  But this magic overload got removed in commit ff26956875
("brd: remove support for BLKFLSBUF"), so this call is entirely
pointless now.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-30 08:22:47 +02:00
Tom Rini eacb0c101a initrd: Remove erroneous comment
Most architectures have been passing the location of an initrd via the
initrd= option since their inception.  Remove the comment as it's both
wrong and unrelated to the commit that introduced it.

For a bit more context, I assume there's been some confusion between
"initrd" being a keyword in things like extlinux.conf and also that for
quite a long time now initrd information is passed via device tree and
not the command line on relevant architectures. But it's still true that
it's been a valid command line option to the kernel since the 90s. It's
just the case that in 2018 the code was consolidated from under arch/
and in to this file.

 [ bp: Move the context clarification up into the commit message proper. ]

Fixes: 694cfd87b0 ("x86/setup: Add an initrdmem= option to specify initrd physical address")
Signed-off-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200619143056.24538-1-trini@konsulko.com
2020-06-19 19:23:54 +02:00
Ronald G. Minnich 694cfd87b0 x86/setup: Add an initrdmem= option to specify initrd physical address
Add the initrdmem option:

  initrdmem=ss[KMG],nn[KMG]

which is used to specify the physical address of the initrd, almost
always an address in FLASH. Also add code for x86 to use the existing
phys_init_start and phys_init_size variables in the kernel.

This is useful in cases where a kernel and an initrd is placed in FLASH,
but there is no firmware file system structure in the FLASH.

One such situation occurs when unused FLASH space on UEFI systems has
been reclaimed by, e.g., taking it from the Management Engine. For
example, on many systems, the ME is given half the FLASH part; not only
is 2.75M of an 8M part unused; but 10.75M of a 16M part is unused. This
space can be used to contain an initrd, but need to tell Linux where it
is.

This space is "raw": due to, e.g., UEFI limitations: it can not be added
to UEFI firmware volumes without rebuilding UEFI from source or writing
a UEFI device driver. It can be referenced only as a physical address
and size.

At the same time, if a kernel can be "netbooted" or loaded from GRUB or
syslinux, the option of not using the physical address specification
should be available.

Then, it is easy to boot the kernel and provide an initrd; or boot the
the kernel and let it use the initrd in FLASH. In practice, this has
proven to be very helpful when integrating Linux into FLASH on x86.

Hence, the most flexible and convenient path is to enable the initrdmem
command line option in a way that it is the last choice tried.

For example, on the DigitalLoggers Atomic Pi, an image into FLASH can be
burnt in with a built-in command line which includes:

  initrdmem=0xff968000,0x200000

which specifies a location and size.

 [ bp: Massage commit message, make it passive. ]

[akpm@linux-foundation.org: coding style fixes]
Signed-off-by: Ronald G. Minnich <rminnich@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Link: http://lkml.kernel.org/r/CAP6exYLK11rhreX=6QPyDQmW7wPHsKNEFtXE47pjx41xS6O7-A@mail.gmail.com
Link: https://lkml.kernel.org/r/20200426011021.1cskg0AGd%akpm@linux-foundation.org
2020-04-27 09:28:16 +02:00
Dominik Brodowski b49a733d68 init: unify opening /dev/console as stdin/stdout/stderr
Merge the two instances where /dev/console is opened as
stdin/stdout/stderr.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2019-12-12 18:58:24 +01:00
Dominik Brodowski d4440aac83 initrd: use do_mount() instead of ksys_mount()
All three calls to ksys_mount() in initrd-related kernel code can
be switched over to do_mount():
- the first and third arguments are const strings in the kernel,
  and do not need to be copied over from userspace;
- the fifth argument is NULL, and therefore no page needs to be,
  copied over from userspace;
- the second and fourth argument are passed through anyway.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2019-12-12 14:50:03 +01:00
Linus Torvalds 505b050fdf Merge branch 'mount.part1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs mount API prep from Al Viro:
 "Mount API prereqs.

  Mostly that's LSM mount options cleanups. There are several minor
  fixes in there, but nothing earth-shattering (leaks on failure exits,
  mostly)"

* 'mount.part1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (27 commits)
  mount_fs: suppress MAC on MS_SUBMOUNT as well as MS_KERNMOUNT
  smack: rewrite smack_sb_eat_lsm_opts()
  smack: get rid of match_token()
  smack: take the guts of smack_parse_opts_str() into a new helper
  LSM: new method: ->sb_add_mnt_opt()
  selinux: rewrite selinux_sb_eat_lsm_opts()
  selinux: regularize Opt_... names a bit
  selinux: switch away from match_token()
  selinux: new helper - selinux_add_opt()
  LSM: bury struct security_mnt_opts
  smack: switch to private smack_mnt_opts
  selinux: switch to private struct selinux_mnt_opts
  LSM: hide struct security_mnt_opts from any generic code
  selinux: kill selinux_sb_get_mnt_opts()
  LSM: turn sb_eat_lsm_opts() into a method
  nfs_remount(): don't leak, don't ignore LSM options quietly
  btrfs: sanitize security_mnt_opts use
  selinux; don't open-code a loop in sb_finish_set_opts()
  LSM: split ->sb_set_mnt_opts() out of ->sb_kern_mount()
  new helper: security_sb_eat_lsm_opts()
  ...
2019-01-05 13:25:58 -08:00
Linus Torvalds 030672aea8 Merge tag 'devicetree-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull Devicetree updates from Rob Herring:
 "The biggest highlight here is the start of using json-schema for DT
  bindings. Being able to validate bindings has been discussed for years
  with little progress.

   - Initial support for DT bindings using json-schema language. This is
     the start of converting DT bindings from free-form text to a
     structured format.

   - Reworking of initrd address initialization. This moves to using the
     phys address instead of virt addr in the DT parsing code. This
     rework was motivated by CONFIG_DEV_BLK_INITRD causing unnecessary
     rebuilding of lots of files.

   - Fix stale phandle entries in phandle cache

   - DT overlay validation improvements. This exposed several memory
     leak bugs which have been fixed.

   - Use node name and device_type helper functions in DT code

   - Last remaining conversions to using %pOFn printk specifier instead
     of device_node.name directly

   - Create new common RTC binding doc and move all trivial RTC devices
     out of trivial-devices.txt.

   - New bindings for Freescale MAG3110 magnetometer, Cadence Sierra
     PHY, and Xen shared memory

   - Update dtc to upstream version v1.4.7-57-gf267e674d145"

* tag 'devicetree-for-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (68 commits)
  of: __of_detach_node() - remove node from phandle cache
  of: of_node_get()/of_node_put() nodes held in phandle cache
  gpio-omap.txt: add reg and interrupts properties
  dt-bindings: mrvl,intc: fix a trivial typo
  dt-bindings: iio: magnetometer: add dt-bindings for freescale mag3110
  dt-bindings: Convert trivial-devices.txt to json-schema
  dt-bindings: arm: mrvl: amend Browstone compatible string
  dt-bindings: arm: Convert Tegra board/soc bindings to json-schema
  dt-bindings: arm: Convert ZTE board/soc bindings to json-schema
  dt-bindings: arm: Add missing Xilinx boards
  dt-bindings: arm: Convert Xilinx board/soc bindings to json-schema
  dt-bindings: arm: Convert VIA board/soc bindings to json-schema
  dt-bindings: arm: Convert ST STi board/soc bindings to json-schema
  dt-bindings: arm: Convert SPEAr board/soc bindings to json-schema
  dt-bindings: arm: Convert CSR SiRF board/soc bindings to json-schema
  dt-bindings: arm: Convert QCom board/soc bindings to json-schema
  dt-bindings: arm: Convert TI nspire board/soc bindings to json-schema
  dt-bindings: arm: Convert TI davinci board/soc bindings to json-schema
  dt-bindings: arm: Convert Calxeda board/soc bindings to json-schema
  dt-bindings: arm: Convert Altera board/soc bindings to json-schema
  ...
2018-12-28 20:08:34 -08:00
David Howells e262e32d6b vfs: Suppress MS_* flag defs within the kernel unless explicitly enabled
Only the mount namespace code that implements mount(2) should be using the
MS_* flags.  Suppress them inside the kernel unless uapi/linux/mount.h is
included.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: David Howells <dhowells@redhat.com>
2018-12-20 16:32:56 +00:00
Florian Fainelli 229c55ccb4 arch: Move initrd= parsing into do_mounts_initrd.c
ARC, ARM, ARM64 and Unicore32 are all capable of parsing the "initrd="
command line parameter to allow specifying the physical address and size
of an initrd. Move that parsing into init/do_mounts_initrd.c such that
we no longer duplicate that logic.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2018-11-26 15:50:45 -06:00
Florian Fainelli b1ab95c636 arch: Make phys_initrd_start and phys_initrd_size global variables
Make phys_initrd_start and phys_initrd_size global variables declared in
init/do_mounts_initrd.c such that we can later have generic code in
drivers/of/fdt.c populate those variables for us.

This requires both the ARM and unicore32 implementations to be properly
guarded against CONFIG_BLK_DEV_INITRD, and also initialize the variables
to the expected default values (unicore32).

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2018-11-26 15:50:02 -06:00
Jens Axboe a1ce35fa49 block: remove dead elevator code
This removes a bunch of core and elevator related code. On the core
front, we remove anything related to queue running, draining,
initialization, plugging, and congestions. We also kill anything
related to request allocation, merging, retrieval, and completion.

Remove any checking for single queue IO schedulers, as they no
longer exist. This means we can also delete a bunch of code related
to request issue, adding, completion, etc - and all the SQ related
ops and helpers.

Also kill the load_default_modules(), as all that did was provide
for a way to load the default single queue elevator.

Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-11-07 13:42:32 -07:00
Luc Van Oostenryck 6ad018e3ca init/: remove ineffective sparse disabling
Sparse checking used to be disabled on init/do_mounts.c and a few related
files because "Many of the syscalls used in this file expect some of the
arguments to be __user pointers not __kernel pointers".

However since 28128c61e ("kconfig.h: Include compiler types to avoid
missed struct attributes") the checks are, in fact, not disabled anymore
because of the more early include of "linux/compiler_types.h"

So remove the now ineffective #undefery that was done to disable these
warnings, as well as the associated comment.

Link: http://lkml.kernel.org/r/20180617115355.53799-1-luc.vanoostenryck@gmail.com
Signed-off-by: Luc Van Oostenryck <luc.vanoostenryck@gmail.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-08-22 10:52:49 -07:00
Dominik Brodowski e2aaa9f423 kernel: add ksys_setsid() helper; remove in-kernel call to sys_setsid()
Using this helper allows us to avoid the in-kernel call to the
sys_setsid() syscall. The ksys_ prefix denotes that this function
is meant as a drop-in replacement for the syscall. In particular, it
uses the same calling convention as sys_setsid().

This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net

Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02 20:16:06 +02:00
Dominik Brodowski 9b32105ec6 kernel: add ksys_unshare() helper; remove in-kernel calls to sys_unshare()
Using this helper allows us to avoid the in-kernel calls to the
sys_unshare() syscall. The ksys_ prefix denotes that this function is meant
as a drop-in replacement for the syscall. In particular, it uses the same
calling convention as sys_unshare().

This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02 20:16:06 +02:00
Dominik Brodowski cbb60b924b fs: add ksys_ioctl() helper; remove in-kernel calls to sys_ioctl()
Using this helper allows us to avoid the in-kernel calls to the
sys_ioctl() syscall. The ksys_ prefix denotes that this function
is meant as a drop-in replacement for the syscall. In particular, it
uses the same calling convention as sys_ioctl().

After careful review, at least some of these calls could be converted
to do_vfs_ioctl() in future.

This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net

Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02 20:16:03 +02:00
Dominik Brodowski bae217ea8c fs: add ksys_open() wrapper; remove in-kernel calls to sys_open()
Using this wrapper allows us to avoid the in-kernel calls to the
sys_open() syscall. The ksys_ prefix denotes that this function is meant
as a drop-in replacement for the syscall. In particular, it uses the
same calling convention as sys_open().

This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02 20:16:01 +02:00
Dominik Brodowski 2ca2a09d62 fs: add ksys_close() wrapper; remove in-kernel calls to sys_close()
Using the ksys_close() wrapper allows us to get rid of in-kernel calls
to the sys_close() syscall. The ksys_ prefix denotes that this function
is meant as a drop-in replacement for the syscall. In particular, it
uses the same calling convention as sys_close(), with one subtle
difference:

The few places which checked the return value did not care about the return
value re-writing in sys_close(), so simply use a wrapper around
__close_fd().

This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02 20:16:00 +02:00
Dominik Brodowski 0101db7a30 fs: add do_mkdirat() helper and ksys_mkdir() wrapper; remove in-kernel calls to syscall
Using the fs-internal do_mkdirat() helper allows us to get rid of
fs-internal calls to the sys_mkdirat() syscall.

Introducing the ksys_mkdir() wrapper allows us to avoid the in-kernel calls
to the sys_mkdir() syscall. The ksys_ prefix denotes that this function is
meant as a drop-in replacement for the syscall. In particular, it uses the
same calling convention as sys_mkdir().

This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02 20:15:54 +02:00
Dominik Brodowski 0f32ab8cfa fs: add ksys_unlink() wrapper; remove in-kernel calls to sys_unlink()
Using this wrapper allows us to avoid the in-kernel calls to the
sys_unlink() syscall. The ksys_ prefix denotes that this function is meant
s a drop-in replacement for the syscall. In particular, it uses the same
calling convention as sys_unlink().

In the near future, all callers of ksys_unlink() should be converted to
call do_unlinkat() directly or, at least, to operate on regular kernel
pointers.

This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02 20:15:52 +02:00
Dominik Brodowski 447016e968 fs: add ksys_chdir() helper; remove in-kernel calls to sys_chdir()
Using this helper allows us to avoid the in-kernel calls to the sys_chdir()
syscall. The ksys_ prefix denotes that this function is meant as a drop-in
replacement for the syscall. In particular, it uses the same calling
convention as sys_chdir().

This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net

Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02 20:15:51 +02:00
Dominik Brodowski a16fe33ab5 fs: add ksys_chroot() helper; remove-in kernel calls to sys_chroot()
Using this helper allows us to avoid the in-kernel calls to the
sys_chroot() syscall. The ksys_ prefix denotes that this function is
meant as a drop-in replacement for the syscall. In particular, it uses the
same calling convention as sys_chroot().

In the near future, the fs-external callers of ksys_chroot() should be
converted to use kern_path()/set_fs_root() directly. Then ksys_chroot()
can be moved within sys_chroot() again.

This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net

Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02 20:15:50 +02:00
Dominik Brodowski c7248321a3 fs: add ksys_dup{,3}() helper; remove in-kernel calls to sys_dup{,3}()
Using ksys_dup() and ksys_dup3() as helper functions allows us to
avoid the in-kernel calls to the sys_dup() and sys_dup3() syscalls.
The ksys_ prefix denotes that these functions are meant as a drop-in
replacement for the syscalls. In particular, they use the same
calling convention as sys_dup{,3}().

In the near future, the fs-external callers of ksys_dup{,3}() should be
converted to call do_dup2() directly. Then, ksys_dup{,3}() can be moved
within sys_dup{,3}() again.

This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net

Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02 20:15:49 +02:00
Dominik Brodowski 3a18ef5c1b fs: add ksys_umount() helper; remove in-kernel call to sys_umount()
Using this helper allows us to avoid the in-kernel call to the sys_umount()
syscall. The ksys_ prefix denotes that this function is meant as a drop-in
replacement for the syscall. In particular, it uses the same calling
convention as ksys_umount().

In the near future, the only fs-external caller of ksys_umount() should be
converted to call do_umount() directly. Then, ksys_umount() can be moved
within sys_umount() again.

This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net

Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02 20:15:48 +02:00
Dominik Brodowski 312db1aa1d fs: add ksys_mount() helper; remove in-kernel calls to sys_mount()
Using this helper allows us to avoid the in-kernel calls to the sys_mount()
syscall. The ksys_ prefix denotes that this function is meant as a drop-in
replacement for the syscall. In particular, it uses the same calling
convention as sys_mount().

In the near future, all callers of ksys_mount() should be converted to call
do_mount() directly.

This patch is part of a series which removes in-kernel calls to syscalls.
On this basis, the syscall entry path can be streamlined. For details, see
http://lkml.kernel.org/r/20180325162527.GA17492@light.dominikbrodowski.net

Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2018-04-02 20:15:48 +02:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Yaowei Bai f057f3b226 init/do_mounts: initrd_load() can be boolean
Make initrd_load() return bool due to this particular function only using
either one or zero as its return value.

No functional change.

Signed-off-by: Yaowei Bai <baiyaowei@cmss.chinamobile.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-01-20 17:09:18 -08:00
Lucas De Marchi 907ed1328d usermodehelper: split remaining calls to call_usermodehelper_fns()
These are the only users of call_usermodehelper_fns().  This function
suffers from not being able to determine if the cleanup is called.  Even
if in this places the cleanup pointer is NULL, convert them to use the
separate call_usermodehelper_setup() + call_usermodehelper_exec()
functions so we can remove the _fns variant.

Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Tejun Heo <tj@kernel.org>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 17:04:06 -07:00
Tejun Heo c14afb82ff Merge branch 'master' into for-3.9-async
To receive f56c3196f2 ("async: fix
__lowest_in_progress()").

Signed-off-by: Tejun Heo <tj@kernel.org>
2013-01-23 09:31:01 -08:00
Al Viro 43b1682024 make sure that /linuxrc has std{in,out,err}
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-01-19 13:29:54 -05:00
Tejun Heo bb813f4c93 init, block: try to load default elevator module early during boot
This patch adds default module loading and uses it to load the default
block elevator.  During boot, it's called right after initramfs or
initrd is made available and right before control is passed to
userland.  This ensures that as long as the modules are available in
the usual places in initramfs, initrd or the root filesystem, the
default modules are loaded as soon as possible.

This will replace the on-demand elevator module loading from elevator
init path.

v2: Fixed build breakage when !CONFIG_BLOCK.  Reported by kbuild test
    robot.

Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Alex Riesen <raa.lkml@gmail.com>
Cc: Fengguang We <fengguang.wu@intel.com>
2013-01-18 14:05:56 -08:00
Al Viro ba4df2808a don't bother with kernel_thread/kernel_execve for launching linuxrc
exec_usermodehelper_fns() will do just fine...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-10-11 21:40:30 -04:00
H Hartley Sweeten c67e5382fb init: disable sparse checking of the mount.o source files
The init/mount.o source files produce a number of sparse warnings of the
type:

warning: incorrect type in argument 1 (different address spaces)
   expected char [noderef] <asn:1>*dev_name
   got char *name

This is due to the syscalls expecting some of the arguments to be user
pointers but they are being passed as kernel pointers.  This is harmless
but adds a lot of noise to a sparse build.

To limit the noise just disable the sparse checking in the relevant source
files, but still display a warning so that the user knows this has been
done.

Since the sparse checking has been disabled we can also remove the __user
__force casts that are scattered thru the source.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-05-31 17:49:27 -07:00
Al Viro 2f99c36986 get rid of pointless includes of ext2_fs.h
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2012-03-31 16:03:15 -04:00
David Howells d7627467b7 Make do_execve() take a const filename pointer
Make do_execve() take a const filename pointer so that kernel_execve() compiles
correctly on ARM:

arch/arm/kernel/sys_arm.c:88: warning: passing argument 1 of 'do_execve' discards qualifiers from pointer target type

This also requires the argv and envp arguments to be consted twice, once for
the pointer array and once for the strings the array points to.  This is
because do_execve() passes a pointer to the filename (now const) to
copy_strings_kernel().  A simpler alternative would be to cast the filename
pointer in do_execve() when it's passed to copy_strings_kernel().

do_execve() may not change any of the strings it is passed as part of the argv
or envp lists as they are some of them in .rodata, so marking these strings as
const should be fine.

Further kernel_execve() and sys_execve() need to be changed to match.

This has been test built on x86_64, frv, arm and mips.

Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Ralf Baechle <ralf@linux-mips.org>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-08-17 18:07:43 -07:00
Eric W. Biederman 2bd3a997be init: Open /dev/console from rootfs
To avoid potential problems with an empty /dev open /dev/console
from rootfs instead of waiting to mount our root filesystem and
mounting it there.   This effectively guarantees that there will
be a device node, and it won't be on a filesystem that we will
ever unmount, so there are no issues with leaving /dev/console
open and pinning the filesystem.

This is actually more effective than automatically mounting
devtmpfs on /dev because it removes removes the occasionally
problematic assumption that /dev/console exists from the boot
code.

With this patch I was able to throw busybox on my /boot partition
(which has no /dev directory) and boot into userspace without
problems.

The only possible negative consequence I can think of is that
someone out there deliberately used did not use a character device
that is major 5 minor 2 for /dev/console.  Does anyone know of a
situation in which that could make sense?

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2010-03-03 14:56:07 -05:00
Rafael J. Wysocki 8baabde66c Freezer: Fix s2disk resume from initrd
Add appropriate freezer annotations to handle_initrd(), so that it's possible
to resume from disk from an initrd.

http://bugzilla.kernel.org/show_bug.cgi?id=9345

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Nigel Cunningham <nigel@nigel.suspend2.net>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Chris Friedhoff <chris@friedhoff.org>
Signed-off-by: Len Brown <len.brown@intel.com>
2007-11-20 22:22:42 -05:00
Nigel Cunningham 019ad4a0a6 Fix failure to resume from initrds
Commit 8314418629 (Freezer: make kernel
threads nonfreezable by default) breaks freezing when attempting to resume
from an initrd, because the init (which is freezeable) spins while waiting
for another thread to run /linuxrc, but doesn't check whether it has been
told to enter the refrigerator.  The original patch replaced a call to
try_to_freeze() with a call to yield().  I believe a simple reversion is
wrong because if !CONFIG_PM_SLEEP, try_to_freeze() is a noop.  It should
still yield.

Signed-off-by: Nigel Cunningham <nigel@nigel.suspend2.net>
Acked-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-09-19 11:24:17 -07:00
Rafael J. Wysocki 8314418629 Freezer: make kernel threads nonfreezable by default
Currently, the freezer treats all tasks as freezable, except for the kernel
threads that explicitly set the PF_NOFREEZE flag for themselves.  This
approach is problematic, since it requires every kernel thread to either
set PF_NOFREEZE explicitly, or call try_to_freeze(), even if it doesn't
care for the freezing of tasks at all.

It seems better to only require the kernel threads that want to or need to
be frozen to use some freezer-related code and to remove any
freezer-related code from the other (nonfreezable) kernel threads, which is
done in this patch.

The patch causes all kernel threads to be nonfreezable by default (ie.  to
have PF_NOFREEZE set by default) and introduces the set_freezable()
function that should be called by the freezable kernel threads in order to
unset PF_NOFREEZE.  It also makes all of the currently freezable kernel
threads call set_freezable(), so it shouldn't cause any (intentional)
change of behaviour to appear.  Additionally, it updates documentation to
describe the freezing of tasks more accurately.

[akpm@linux-foundation.org: build fixes]
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Nigel Cunningham <nigel@nigel.suspend2.net>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Gautham R Shenoy <ego@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-07-17 10:23:02 -07:00
Rafael J. Wysocki 726162b5da freezer: remove PF_NOFREEZE from handle_initrd
Make handle_initrd() call try_to_freeze() in a suitable place instead of setting
PF_NOFREEZE for the current task.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Nigel Cunningham <nigel@nigel.suspend2.net>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-05-07 12:12:59 -07:00
Nigel Cunningham 7dfb71030f [PATCH] Add include/linux/freezer.h and move definitions from sched.h
Move process freezing functions from include/linux/sched.h to freezer.h, so
that modifications to the freezer or the kernel configuration don't require
recompiling just about everything.

[akpm@osdl.org: fix ueagle driver]
Signed-off-by: Nigel Cunningham <nigel@suspend2.net>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-12-07 08:39:27 -08:00