Граф коммитов

11639 Коммитов

Автор SHA1 Сообщение Дата
Linus Torvalds 9413cd7792 Two fixes for the interrupt subsystem:
- Make the handling of the firmware node consistent and do not free the
    node after the domain has been created successfully. The core code
    stores a pointer to it which can lead to a use after free or double
    free.
 
    This used to "work" because the pointer was not stored when the initial
    code was written, but at some point later it was required to store
    it. Of course nobody noticed that the existing users break that way.
 
  - Handle affinity setting on inactive interrupts correctly when
    hierarchical irq domains are enabled. When interrupts are inactive with
    the modern hierarchical irqdomain design, the interrupt chips are not
    necessarily in a state where affinity changes can be handled. The legacy
    irq chip design allowed this because interrupts are immediately fully
    initialized at allocation time. X86 has a hacky workaround for this, but
    other implementations do not. This cased malfunction on GIC-V3. Instead
    of playing whack a mole to find all affected drivers, change the core
    code to store the requested affinity setting and then establish it when
    the interrupt is allocated, which makes the X86 hack go away.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl8UP+4THHRnbHhAbGlu
 dXRyb25peC5kZQAKCRCmGPVMDXSYoSuZD/9tNPR4fIDt4mC9ciSvwSqGTV+q1y1D
 zhXSDro4cJNjzy/9D475IJqOlvchaF9Nfun55b60Q6vnA4VN8G+kABEaG8uwr8mV
 ijTB4f0qKfW/9kUDTJRScq3nNmC3miqg8ZFgFEn6Ecxj3NHmwidATIi5sF6f/XVG
 DdhL0Jys7ycNeGBf7yIKbT5/NOULMHYy9rK1NDAeBo9u3klvmrwrHgdNsiDDhEaU
 KlHtwuQLCdjFY3Lf67YpSah+Hx/gXPI1VHUxDDFRoFmC4RlB0VjyXGydjsisOrSQ
 Cl2gnkQ6VOlLaLbN38nmia9nyb6npzE5iK1h9EDcaRhBACG9O23Bdo+YZYxl6BOP
 mXuyIVKJYczJEp7j1fGHW/aNCoEqC8dGVyN7toxMVfGZmF12JzMSt4SYItPeSjFC
 bPNPRCscpiMOQdgwgO0woK1764V46g1BlmxXtJRdWB4iwWgXcryaz65xzSfNeZF4
 0+TvdYs2FYjxwwIyWj8xJ3Npe1lKhH+06DA6gziwJt1u4it8rl82UcqMFyf/ty1w
 o5LHyMBWYm7SJXSeaZZj+nv7moJKJnmRYKnpry21cUzsK/vQEPX0vqhwh4dSFN3O
 BaBocDsOk+9wkmUwi6haP+6+vpadAFQrsqVhURtwc6OVSWn2/vsf2ZH5P36xwFWD
 tlFanb8hX9y2NQ==
 =elM3
 -----END PGP SIGNATURE-----

Merge tag 'irq-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master

Pull irq fixes from Thomas Gleixner:
 "Two fixes for the interrupt subsystem:

   - Make the handling of the firmware node consistent and do not free
     the node after the domain has been created successfully. The core
     code stores a pointer to it which can lead to a use after free or
     double free.

     This used to "work" because the pointer was not stored when the
     initial code was written, but at some point later it was required
     to store it. Of course nobody noticed that the existing users break
     that way.

   - Handle affinity setting on inactive interrupts correctly when
     hierarchical irq domains are enabled.

     When interrupts are inactive with the modern hierarchical irqdomain
     design, the interrupt chips are not necessarily in a state where
     affinity changes can be handled. The legacy irq chip design allowed
     this because interrupts are immediately fully initialized at
     allocation time. X86 has a hacky workaround for this, but other
     implementations do not.

     This cased malfunction on GIC-V3. Instead of playing whack a mole
     to find all affected drivers, change the core code to store the
     requested affinity setting and then establish it when the interrupt
     is allocated, which makes the X86 hack go away"

* tag 'irq-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  genirq/affinity: Handle affinity setting on inactive interrupts correctly
  irqdomain/treewide: Keep firmware node unconditionally allocated
2020-07-19 11:53:08 -07:00
Thomas Gleixner e3beca48a4 irqdomain/treewide: Keep firmware node unconditionally allocated
Quite some non OF/ACPI users of irqdomains allocate firmware nodes of type
IRQCHIP_FWNODE_NAMED or IRQCHIP_FWNODE_NAMED_ID and free them right after
creating the irqdomain. The only purpose of these FW nodes is to convey
name information. When this was introduced the core code did not store the
pointer to the node in the irqdomain. A recent change stored the firmware
node pointer in irqdomain for other reasons and missed to notice that the
usage sites which do the alloc_fwnode/create_domain/free_fwnode sequence
are broken by this. Storing a dangling pointer is dangerous itself, but in
case that the domain is destroyed later on this leads to a double free.

Remove the freeing of the firmware node after creating the irqdomain from
all affected call sites to cure this.

Fixes: 711419e504 ("irqdomain: Add the missing assignment of domain->fwnode for named fwnode")
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/873661qakd.fsf@nanos.tec.linutronix.de
2020-07-14 17:44:42 +02:00
Nathan Chancellor 9321f1aaf6 mips: Remove compiler check in unroll macro
CONFIG_CC_IS_GCC is undefined when Clang is used, which breaks the build
(see our Travis link below).

Clang 8 was chosen as a minimum version for this check because there
were some improvements around __builtin_constant_p in that release. In
reality, MIPS was not even buildable until clang 9 so that check was not
technically necessary. Just remove all compiler checks and just assume
that we have a working compiler.

Fixes: d4e6045326 ("Restore gcc check in mips asm/unroll.h")
Link: https://travis-ci.com/github/ClangBuiltLinux/continuous-integration/jobs/359642821
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-10 15:42:06 -07:00
Linus Torvalds cb24c61b53 Two simple but important bugfixes.
-----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl8IQ20UHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroNzxQf+KziWiVgLYnRmGVJ4xztRGv8Cjt+o
 g1YRyJgpST4UEdHyO+T1JvO8HVzTxtDwZlRNHB9UtIaAsAuybSdpUaHeK9lvcZvi
 vd59ItmyHKFOtItfG6Qpj6MJKN9tbN1y2F9Vc+TXNLL9BLHwPTbvF3l5ffdtBJ6F
 zurQBec7hoCarXZJS2GfzBQ+16WxZmm7RLDpYtEqAayp+UHNw+Z1eMrMV6TwdxAA
 3LgDn3l+A+BNuIIUKFF9Y5Ef3T4zBWGbdsV7FR9mH1fq2DiT1Vz4IT674L+6rEom
 /KvyyjVPIfQF33sMZmVpLCpoe2IEmOtc7cu3zffqNL6gNw3YHZwMK6cgsg==
 =abJa
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull vkm fixes from Paolo Bonzini:
 "Two simple but important bugfixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: MIPS: Fix build errors for 32bit kernel
  KVM: nVMX: fixes for preemption timer migration
2020-07-10 08:34:12 -07:00
Huacai Chen 3d9fdc252b KVM: MIPS: Fix build errors for 32bit kernel
Commit dc6d95b153 ("KVM: MIPS: Add more MMIO load/store
instructions emulation") introduced some 64bit load/store instructions
emulation which are unavailable on 32bit platform, and it causes build
errors:

arch/mips/kvm/emulate.c: In function 'kvm_mips_emulate_store':
arch/mips/kvm/emulate.c:1734:6: error: right shift count >= width of type [-Werror]
      ((vcpu->arch.gprs[rt] >> 56) & 0xff);
      ^
arch/mips/kvm/emulate.c:1738:6: error: right shift count >= width of type [-Werror]
      ((vcpu->arch.gprs[rt] >> 48) & 0xffff);
      ^
arch/mips/kvm/emulate.c:1742:6: error: right shift count >= width of type [-Werror]
      ((vcpu->arch.gprs[rt] >> 40) & 0xffffff);
      ^
arch/mips/kvm/emulate.c:1746:6: error: right shift count >= width of type [-Werror]
      ((vcpu->arch.gprs[rt] >> 32) & 0xffffffff);
      ^
arch/mips/kvm/emulate.c:1796:6: error: left shift count >= width of type [-Werror]
      (vcpu->arch.gprs[rt] << 32);
      ^
arch/mips/kvm/emulate.c:1800:6: error: left shift count >= width of type [-Werror]
      (vcpu->arch.gprs[rt] << 40);
      ^
arch/mips/kvm/emulate.c:1804:6: error: left shift count >= width of type [-Werror]
      (vcpu->arch.gprs[rt] << 48);
      ^
arch/mips/kvm/emulate.c:1808:6: error: left shift count >= width of type [-Werror]
      (vcpu->arch.gprs[rt] << 56);
      ^
cc1: all warnings being treated as errors
make[3]: *** [arch/mips/kvm/emulate.o] Error 1

So, use #if defined(CONFIG_64BIT) && defined(CONFIG_KVM_MIPS_VZ) to
guard the 64bit load/store instructions emulation.

Reported-by: kernel test robot <lkp@intel.com>
Fixes: dc6d95b153 ("KVM: MIPS: Add more MMIO load/store instructions emulation")
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Message-Id: <1594365797-536-1-git-send-email-chenhc@lemote.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-10 06:15:38 -04:00
Cesar Eduardo Barros d4e6045326 Restore gcc check in mips asm/unroll.h
While raising the gcc version requirement to 4.9, the compile-time check
in the unroll macro was accidentally changed from being used on gcc and
clang to being used on clang only.

Restore the gcc check, changing it from "gcc >= 4.7" to "all gcc".

[ We should probably remove this all entirely: if we remove the check
  for CLANG, then the check for GCC can go away. Older versions of clang
  are not really appropriate or supported for kernel builds - Linus ]

Fixes: 6ec4476ac8 ("Raise gcc version requirement to 4.9")
Signed-off-by: Cesar Eduardo Barros <cesarb@cesarb.eti.br>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-09 18:03:47 -07:00
Linus Torvalds 6ec4476ac8 Raise gcc version requirement to 4.9
I realize that we fairly recently raised it to 4.8, but the fact is, 4.9
is a much better minimum version to target.

We have a number of workarounds for actual bugs in pre-4.9 gcc versions
(including things like internal compiler errors on ARM), but we also
have some syntactic workarounds for lacking features.

In particular, raising the minimum to 4.9 means that we can now just
assume _Generic() exists, which is likely the much better replacement
for a lot of very convoluted built-time magic with conditionals on
sizeof and/or __builtin_choose_expr() with same_type() etc.

Using _Generic also means that you will need to have a very recent
version of 'sparse', but thats easy to build yourself, and much less of
a hassle than some old gcc version can be.

The latest (in a long string) of reasons for minimum compiler version
upgrades was commit 5435f73d5c ("efi/x86: Fix build with gcc 4").

Ard points out that RHEL 7 uses gcc-4.8, but the people who stay back on
old RHEL versions persumably also don't build their own kernels anyway.
And maybe they should cross-built or just have a little side affair with
a newer compiler?

Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-07-08 10:48:35 -07:00
Linus Torvalds 45a5ac7a5c A few MIPS fixes:
- fix for missing hazard barrier
 
 - DT fix for ingenic
 
 - DT fix of GPHY names for lantiq
 
 - fix usage of smp_processor_id() while preemption is enabled
 -----BEGIN PGP SIGNATURE-----
 
 iQJOBAABCAA4FiEEbt46xwy6kEcDOXoUeZbBVTGwZHAFAl8Bpt8aHHRzYm9nZW5k
 QGFscGhhLmZyYW5rZW4uZGUACgkQeZbBVTGwZHBVlA/+JsNymfzLCaUHgEyjDzfp
 R7x3/UUNHOF659MKebEIJEd/Rmhj+pg5682e3SugpNlOxuadB7Kl1j0SYNdVbR0h
 Dg7ztP3osWbymoJG829xLvpYMlLGLuNaNUBV/8mFNwPy2bijmgkObYyeciFEQlvy
 skHihVZCYQ1qVqMtDlNEmMGU0V6JTHuqOfdF7+d7ZmkwHpKGDBgR0BL3rhQREHif
 iawKjkhuemgVpw0g6ULpuWlwvsgTbQNoaMIIGIlsaGfYWlyBnlnhbiZHg+WwC5Ey
 zzuDFybQq9K+cylgwlrn7ypxCpUBfKCVzYUcEOcQC4+BPt74t1mwfS24FQS3HDol
 pQ9lpIPLkm5m0kxokUT8Ei/lcSA1NeiubMOGQJaEc+7gpyBTcw+ChLB242cilngB
 CzME5hppGEQlkBefS8CYZaOGUhhU0qaqm6WMkcQ0YIuiyo+ZmwQ6nwyVNbDB/BMb
 vK99mgCf96PWqu8vcCcifC+O/wSBOUrMD3vljAswY6xwP9gQ4WYFAcielEXoSVMV
 sIlVHNbDivpb6e41zerK+KU9Z1oCgPnFKT6FmkDtdQWQ4iDfOEUi/n72NlNfH5xT
 MDGaaYVYuW3M1eR4Tlahe+UA2qIleZDc9DgORhu1kwlxecMfQSaBdKh1G9ifqw58
 ZbzM1YrJHHh2xEBvhjpGaZU=
 =A4AW
 -----END PGP SIGNATURE-----

Merge tag 'mips_fixes_5.8_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS fixes from Thomas Bogendoerfer:

 - fix for missing hazard barrier

 - DT fix for ingenic

 - DT fix of GPHY names for lantiq

 - fix usage of smp_processor_id() while preemption is enabled

* tag 'mips_fixes_5.8_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: Do not use smp_processor_id() in preemptible code
  MIPS: Add missing EHB in mtc0 -> mfc0 sequence for DSPen
  MIPS: ingenic: gcw0: Fix HP detection GPIO.
  MIPS: lantiq: xway: sysctrl: fix the GPHY clock alias names
2020-07-05 10:29:32 -07:00
Xingxing Su 5868347a19 MIPS: Do not use smp_processor_id() in preemptible code
Use preempt_disable() to fix the following bug under CONFIG_DEBUG_PREEMPT.

[   21.915305] BUG: using smp_processor_id() in preemptible [00000000] code: qemu-system-mip/1056
[   21.923996] caller is do_ri+0x1d4/0x690
[   21.927921] CPU: 0 PID: 1056 Comm: qemu-system-mip Not tainted 5.8.0-rc2 #3
[   21.934913] Stack : 0000000000000001 ffffffff81370000 ffffffff8071cd60 a80f926d5ac95694
[   21.942984]         a80f926d5ac95694 0000000000000000 98000007f0043c88 ffffffff80f2fe40
[   21.951054]         0000000000000000 0000000000000000 0000000000000001 0000000000000000
[   21.959123]         ffffffff802d60cc 98000007f0043dd8 ffffffff81f4b1e8 ffffffff81f60000
[   21.967192]         ffffffff81f60000 ffffffff80fe0000 ffff000000000000 0000000000000000
[   21.975261]         fffffffff500cce1 0000000000000001 0000000000000002 0000000000000000
[   21.983331]         ffffffff80fe1a40 0000000000000006 ffffffff8077f940 0000000000000000
[   21.991401]         ffffffff81460000 98000007f0040000 98000007f0043c80 000000fffba8cf20
[   21.999471]         ffffffff8071cd60 0000000000000000 0000000000000000 0000000000000000
[   22.007541]         0000000000000000 0000000000000000 ffffffff80212ab4 a80f926d5ac95694
[   22.015610]         ...
[   22.018086] Call Trace:
[   22.020562] [<ffffffff80212ab4>] show_stack+0xa4/0x138
[   22.025732] [<ffffffff8071cd60>] dump_stack+0xf0/0x150
[   22.030903] [<ffffffff80c73f5c>] check_preemption_disabled+0xf4/0x100
[   22.037375] [<ffffffff80213b84>] do_ri+0x1d4/0x690
[   22.042198] [<ffffffff8020b828>] handle_ri_int+0x44/0x5c
[   24.359386] BUG: using smp_processor_id() in preemptible [00000000] code: qemu-system-mip/1072
[   24.368204] caller is do_ri+0x1a8/0x690
[   24.372169] CPU: 4 PID: 1072 Comm: qemu-system-mip Not tainted 5.8.0-rc2 #3
[   24.379170] Stack : 0000000000000001 ffffffff81370000 ffffffff8071cd60 a80f926d5ac95694
[   24.387246]         a80f926d5ac95694 0000000000000000 98001007ef06bc88 ffffffff80f2fe40
[   24.395318]         0000000000000000 0000000000000000 0000000000000001 0000000000000000
[   24.403389]         ffffffff802d60cc 98001007ef06bdd8 ffffffff81f4b818 ffffffff81f60000
[   24.411461]         ffffffff81f60000 ffffffff80fe0000 ffff000000000000 0000000000000000
[   24.419533]         fffffffff500cce1 0000000000000001 0000000000000002 0000000000000000
[   24.427603]         ffffffff80fe0000 0000000000000006 ffffffff8077f940 0000000000000020
[   24.435673]         ffffffff81460020 98001007ef068000 98001007ef06bc80 000000fffbbbb370
[   24.443745]         ffffffff8071cd60 0000000000000000 0000000000000000 0000000000000000
[   24.451816]         0000000000000000 0000000000000000 ffffffff80212ab4 a80f926d5ac95694
[   24.459887]         ...
[   24.462367] Call Trace:
[   24.464846] [<ffffffff80212ab4>] show_stack+0xa4/0x138
[   24.470029] [<ffffffff8071cd60>] dump_stack+0xf0/0x150
[   24.475208] [<ffffffff80c73f5c>] check_preemption_disabled+0xf4/0x100
[   24.481682] [<ffffffff80213b58>] do_ri+0x1a8/0x690
[   24.486509] [<ffffffff8020b828>] handle_ri_int+0x44/0x5c

Signed-off-by: Xingxing Su <suxingxing@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-07-05 11:43:52 +02:00
Hauke Mehrtens fcec538ef8 MIPS: Add missing EHB in mtc0 -> mfc0 sequence for DSPen
This resolves the hazard between the mtc0 in the change_c0_status() and
the mfc0 in configure_exception_vector(). Without resolving this hazard
configure_exception_vector() could read an old value and would restore
this old value again. This would revert the changes change_c0_status()
did. I checked this by printing out the read_c0_status() at the end of
per_cpu_trap_init() and the ST0_MX is not set without this patch.

The hazard is documented in the MIPS Architecture Reference Manual Vol.
III: MIPS32/microMIPS32 Privileged Resource Architecture (MD00088), rev
6.03 table 8.1 which includes:

   Producer | Consumer | Hazard
  ----------|----------|----------------------------
   mtc0     | mfc0     | any coprocessor 0 register

I saw this hazard on an Atheros AR9344 rev 2 SoC with a MIPS 74Kc CPU.
There the change_c0_status() function would activate the DSPen by
setting ST0_MX in the c0_status register. This was reverted and then the
system got a DSP exception when the DSP registers were saved in
save_dsp() in the first process switch. The crash looks like this:

[    0.089999] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.097796] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.107070] Kernel panic - not syncing: Unexpected DSP exception
[    0.113470] Rebooting in 1 seconds..

We saw this problem in OpenWrt only on the MIPS 74Kc based Atheros SoCs,
not on the 24Kc based SoCs. We only saw it with kernel 5.4 not with
kernel 4.19, in addition we had to use GCC 8.4 or 9.X, with GCC 8.3 it
did not happen.

In the kernel I bisected this problem to commit 9012d01166 ("compiler:
allow all arches to enable CONFIG_OPTIMIZE_INLINING"), but when this was
reverted it also happened after commit 172dcd935c ("MIPS: Always
allocate exception vector for MIPSr2+").

Commit 0b24cae4d5 ("MIPS: Add missing EHB in mtc0 -> mfc0 sequence.")
does similar changes to a different file. I am not sure if there are
more places affected by this problem.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-07-05 11:43:25 +02:00
João H. Spies 9fbbb7ddd9 MIPS: ingenic: gcw0: Fix HP detection GPIO.
Previously marked as active high, but is in reality active low.

Cc: stable@vger.kernel.org
Fixes: b1bfdb6605 ("MIPS: ingenic: DTS: Update GCW0 support")
Signed-off-by: João H. Spies <jhlspies@gmail.com>
Tested-by: Paul Cercueil <paul@crapouillou.net>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-06-25 10:18:22 +02:00
Linus Torvalds 26e122e97a All bugfixes except for a couple cleanup patches.
-----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl7x2lwUHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroPiVAgAn/83Vx/YrF9sr0+TLzukzfOubJVK
 Majxb0I06De23VDExiDoZjh5CnCN3kDja0m2c543ZI1XOrHRbp09v1goJQkAgiT0
 AQ8Npi1KB71io18SbZtrAhPLmSiUgRirF+XWHB38qjdbZixvZyWz8nvSITFY8aJQ
 ICgbm5jftzBdSOKEhqbHwZ+LcXjEGZsehwTiHpUBKUR/kNlRFV5UFAd5m+CT5i4O
 3DydLIReATDCoZUKfkBjYtoR3c9DyWESyfWD4GZ/2xRKr/1QfiZ4dA0cd/P9hJYz
 7MAG+ULvJGlasSzmcEQJ/X3o9QuIJzpQFpwbKeMX6gOsEsSVUQeriUHIFA==
 =jTFw
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm fixes from Paolo Bonzini:
 "All bugfixes except for a couple cleanup patches"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: VMX: Remove vcpu_vmx's defunct copy of host_pkru
  KVM: x86: allow TSC to differ by NTP correction bounds without TSC scaling
  KVM: X86: Fix MSR range of APIC registers in X2APIC mode
  KVM: VMX: Stop context switching MSR_IA32_UMWAIT_CONTROL
  KVM: nVMX: Plumb L2 GPA through to PML emulation
  KVM: x86/mmu: Avoid mixing gpa_t with gfn_t in walk_addr_generic()
  KVM: LAPIC: ensure APIC map is up to date on concurrent update requests
  kvm: lapic: fix broken vcpu hotplug
  Revert "KVM: VMX: Micro-optimize vmexit time when not exposing PMU"
  KVM: VMX: Add helpers to identify interrupt type from intr_info
  kvm/svm: disable KCSAN for svm_vcpu_run()
  KVM: MIPS: Fix a build error for !CPU_LOONGSON64
2020-06-23 11:01:16 -07:00
Christoph Hellwig fe557319aa maccess: rename probe_kernel_{read,write} to copy_{from,to}_kernel_nofault
Better describe what these functions do.

Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-17 10:57:41 -07:00
Martin Blumenstingl 03e62fd67d MIPS: lantiq: xway: sysctrl: fix the GPHY clock alias names
The dt-bindings for the GSWIP describe that the node should be named
"switch". Use the same name in sysctrl.c so the GSWIP driver can
actually find the "gphy0" and "gphy1" clocks.

Fixes: 14fceff477 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
2020-06-15 13:14:51 +02:00
Huacai Chen 0ae705f3d2 KVM: MIPS: Fix a build error for !CPU_LOONGSON64
During the KVM merging progress, a CONFIG_CPU_LOONGSON64 guard in commit
7f2a83f1c2 ("KVM: MIPS: Add CPUCFG emulation for Loongson-3")
is missing by accident. So add it to avoid building error.

Fixes: 7f2a83f1c2 ("KVM: MIPS: Add CPUCFG emulation for Loongson-3")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Message-Id: <1592204215-28704-1-git-send-email-chenhc@lemote.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-15 05:24:30 -04:00
Linus Torvalds 6adc19fd13 Kbuild updates for v5.8 (2nd)
- fix build rules in binderfs sample
 
  - fix build errors when Kbuild recurses to the top Makefile
 
  - covert '---help---' in Kconfig to 'help'
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl7lBuYVHG1hc2FoaXJv
 eUBrZXJuZWwub3JnAAoJED2LAQed4NsGHvIP/3iErjPshpg/phwH8NTCS4SFkiti
 BZRM+2lupSn7Qs53BTpVzIkXoHBJQZlJxlQ5HY8ScO+fiz28rKZr+b40us+je1Q+
 SkvSPfwZzxjEg7lAZutznG4KgItJLWJKmDyh9T8Y8TAuG4f8WO0hKnXoAp3YorS2
 zppEIxso8O5spZPjp+fF/fPbxPjIsabGK7Jp2LpSVFR5pVDHI/ycTlKQS+MFpMEx
 6JIpdFRw7TkvKew1dr5uAWT5btWHatEqjSR3JeyVHv3EICTGQwHmcHK67cJzGInK
 T51+DT7/CpKtmRgGMiTEu/INfMzzoQAKl6Fcu+vMaShTN97Hk9DpdtQyvA6P/h3L
 8GA4UBct05J7fjjIB7iUD+GYQ0EZbaFujzRXLYk+dQqEJRbhcCwvdzggGp0WvGRs
 1f8/AIpgnQv8JSL/bOMgGMS5uL2dSLsgbzTdr6RzWf1jlYdI1i4u7AZ/nBrwWP+Z
 iOBkKsVceEoJrTbaynl3eoYqFLtWyDau+//oBc2gUvmhn8ioM5dfqBRiJjxJnPG9
 /giRj6xRIqMMEw8Gg8PCG7WebfWxWyaIQwlWBbPok7DwISURK5mvOyakZL+Q25/y
 6MBr2H8NEJsf35q0GTINpfZnot7NX4JXrrndJH8NIRC7HEhwd29S041xlQJdP0rs
 E76xsOr3hrAmBu4P
 =1NIT
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull more Kbuild updates from Masahiro Yamada:

 - fix build rules in binderfs sample

 - fix build errors when Kbuild recurses to the top Makefile

 - covert '---help---' in Kconfig to 'help'

* tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  treewide: replace '---help---' in Kconfig files with 'help'
  kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables
  samples: binderfs: really compile this sample and fix build issues
2020-06-13 13:29:16 -07:00
Masahiro Yamada a7f7f6248d treewide: replace '---help---' in Kconfig files with 'help'
Since commit 84af7a6194 ("checkpatch: kconfig: prefer 'help' over
'---help---'"), the number of '---help---' has been gradually
decreasing, but there are still more than 2400 instances.

This commit finishes the conversion. While I touched the lines,
I also fixed the indentation.

There are a variety of indentation styles found.

  a) 4 spaces + '---help---'
  b) 7 spaces + '---help---'
  c) 8 spaces + '---help---'
  d) 1 space + 1 tab + '---help---'
  e) 1 tab + '---help---'    (correct indentation)
  f) 1 tab + 1 space + '---help---'
  g) 1 tab + 2 spaces + '---help---'

In order to convert all of them to 1 tab + 'help', I ran the
following commend:

  $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/'

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-14 01:57:21 +09:00
Linus Torvalds 52cd0d972f MIPS:
- Loongson port
 
 PPC:
 - Fixes
 
 ARM:
 - Fixes
 
 x86:
 - KVM_SET_USER_MEMORY_REGION optimizations
 - Fixes
 - Selftest fixes
 
 The guest side of the asynchronous page fault work has been delayed to 5.9
 in order to sync with Thomas's interrupt entry rework.
 -----BEGIN PGP SIGNATURE-----
 
 iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAl7icj4UHHBib256aW5p
 QHJlZGhhdC5jb20ACgkQv/vSX3jHroPHGQgAj9+5j+f5v06iMP/+ponWwsVfh+5/
 UR1gPbpMSFMKF0U+BCFxsBeGKWPDiz9QXaLfy6UGfOFYBI475Su5SoZ8/i/o6a2V
 QjcKIJxBRNs66IG/774pIpONY8/mm/3b6vxmQktyBTqjb6XMGlOwoGZixj/RTp85
 +uwSICxMlrijg+fhFMwC4Bo/8SFg+FeBVbwR07my88JaLj+3cV/NPolG900qLSa6
 uPqJ289EQ86LrHIHXCEWRKYvwy77GFsmBYjKZH8yXpdzUlSGNexV8eIMAz50figu
 wYRJGmHrRqwuzFwEGknv8SA3s2HVggXO4WVkWWCeJyO8nIVfYFUhME5l6Q==
 =+Hh0
 -----END PGP SIGNATURE-----

Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull more KVM updates from Paolo Bonzini:
 "The guest side of the asynchronous page fault work has been delayed to
  5.9 in order to sync with Thomas's interrupt entry rework, but here's
  the rest of the KVM updates for this merge window.

  MIPS:
   - Loongson port

  PPC:
   - Fixes

  ARM:
   - Fixes

  x86:
   - KVM_SET_USER_MEMORY_REGION optimizations
   - Fixes
   - Selftest fixes"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (62 commits)
  KVM: x86: do not pass poisoned hva to __kvm_set_memory_region
  KVM: selftests: fix sync_with_host() in smm_test
  KVM: async_pf: Inject 'page ready' event only if 'page not present' was previously injected
  KVM: async_pf: Cleanup kvm_setup_async_pf()
  kvm: i8254: remove redundant assignment to pointer s
  KVM: x86: respect singlestep when emulating instruction
  KVM: selftests: Don't probe KVM_CAP_HYPERV_ENLIGHTENED_VMCS when nested VMX is unsupported
  KVM: selftests: do not substitute SVM/VMX check with KVM_CAP_NESTED_STATE check
  KVM: nVMX: Consult only the "basic" exit reason when routing nested exit
  KVM: arm64: Move hyp_symbol_addr() to kvm_asm.h
  KVM: arm64: Synchronize sysreg state on injecting an AArch32 exception
  KVM: arm64: Make vcpu_cp1x() work on Big Endian hosts
  KVM: arm64: Remove host_cpu_context member from vcpu structure
  KVM: arm64: Stop sparse from moaning at __hyp_this_cpu_ptr
  KVM: arm64: Handle PtrAuth traps early
  KVM: x86: Unexport x86_fpu_cache and make it static
  KVM: selftests: Ignore KVM 5-level paging support for VM_MODE_PXXV48_4K
  KVM: arm64: Save the host's PtrAuth keys in non-preemptible context
  KVM: arm64: Stop save/restoring ACTLR_EL1
  KVM: arm64: Add emulation for 32bit guests accessing ACTLR2
  ...
2020-06-12 11:05:52 -07:00
Linus Torvalds 6f630784cc This time around we have 4 lines of diff in the core framework, removing a
function that isn't used anymore. Otherwise the main new thing for the common
 clk framework is that it is selectable in the Kconfig language now. Hopefully
 this will let clk drivers and clk consumers be testable on more than the
 architectures that support the clk framework. The goal is to introduce some
 Kunit tests for the framework.
 
 Outside of the core framework we have the usual set of various driver updates
 and non-critical fixes. The dirstat shows that the new Baikal-T1 driver is the
 largest addition this time around in terms of lines of code. After that the x86
 (Intel), Qualcomm, and Mediatek drivers introduce many lines to support new or
 upcoming SoCs. After that the dirstat shows the usual suspects working on their
 SoC support by fixing minor bugs, correcting data and converting some of their
 DT bindings to YAML.
 
 Core:
  - Allow the COMMON_CLK config to be selectable
 
 New Drivers:
  - Clk driver for Baikal-T1 SoCs
  - Mediatek MT6765 clock support
  - Support for Intel Agilex clks
  - Add support for X1830 and X1000 Ingenic SoC clk controllers
  - Add support for the new Renesas RZ/G1H (R8A7742) SoC
  - Add support for Qualcomm's MSM8939 Generic Clock Controller
 
 Updates:
  - Support IDT VersaClock 5P49V5925
  - Bunch of updates for HSDK clock generation unit (CGU) driver
  - Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs
  - Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver
  - Enable supply regulators for GPU gdscs on Qualcomm SoCs
  - Add support for Si5342, Si5344 and Si5345 chips
  - Support custom flags in Xilinx zynq firmware
  - Various small fixes to the Xilinx clk driver
  - A single minor rounding fix for the legacy Allwinner clock support
  - A few patches from Abel Vesa as preparation of adding audiomix clock support
    on i.MX
  - A couple of cleanups from Anson Huang for i.MX clk-sscg-pll and clk-pllv3
    drivers
  - Drop dependency on ARM64 for i.MX8M clock driver, to support aarch32 mode on
    aarch64 hardware
  - A series from Peng Fan to improve i.MX8M clock drivers, using composite
    clock for core and bus clk slice
  - Set a better parent clock for flexcan on i.MX6UL to support CiA102 defined
    bit rates
  - A couple changes for EMC frequency scaling on Tegra210
  - Support for CPU frequency scaling on Tegra20/Tegra30
  - New clk gate for CSI test pattern generator on Tegra210
  - Regression fixes for Samsung exynos542x and exynos5433 SoCs
  - Use of fallthrough; attribute for Samsung s3c24xx
  - Updates and fixup HDMI and video clocks on Meson8b
  - Fixup reset polarity on Meson8b
  - Fix GPU glitch free mux switch on Meson gx and g12
  - A minor fix for the currently unused suspend/resume handling on Renesas RZ/A1 and RZ/A2
  - Two more conversions of Renesas DT bindings to json-schema
  - Add support for the USB 2.0 clock selector on Renesas R-Car M3-W+
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAl7gEUgRHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSUemxAAlQKzx0yMS3yx5twJ4RSFUvf3hf4OqyPp
 O46soqADk+l69Z4SUUBsMjt8el5Sqmm4d1j1Gpfmgp3ZlumHCQK+qGYp48IXbwRP
 Jlo5sKNlNL6yhCd+ixPn4j7W/HbpGs4cciWOXkGQtYEGjhHm3Wllhd9MqpL2YjLx
 gZW60NqWtOe1XeB4ILyYQGisNwAGDi5XuBeNvxG12H/LaGC1mwtBX9yoNAehr9bF
 peJ2XnO02zFo73OCyzIOkw1uY4u7ZtwPdHGhymoGeVlcBWO6KwKesNkHnji/Grlv
 wMbsGLoRV/i3PL3q5kZIDigo8sqZ9RUG+9piRAoiLM5AgkSypw3/q9T+ujTfZp8t
 kgvFha6bLZz31UFmr4lBJPTT5Q/hAoe1W6RB6HZkx7XNqUpsAS04SwkQztAqkJqZ
 9zlYJrXgLlP5qcNllJ6zvUWkMqtmIKW4ZkjYe4u84yk5Co7bX8DCYa+QOKCz+pV4
 IbjRT62OrX2ZlXJYwkLb4m1nhZ7tBzhzIRP1umL0ukhxdomK6ofSNPzbBF9+t1eR
 /ai2/Ch6L6WIwDINEp+chO67/dJaj5W3WNqGMCmVt37myW1kBjH3eg0YG4cp7NYZ
 /jSjdWczQy/8BgY5V1009MRXI4uyazQxBw+apDcIGezamOKBmuwjBcvkf1D0mL2x
 Y6OclK5ljsw=
 =nuG5
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "This time around we have four lines of diff in the core framework,
  removing a function that isn't used anymore. Otherwise the main new
  thing for the common clk framework is that it is selectable in the
  Kconfig language now. Hopefully this will let clk drivers and clk
  consumers be testable on more than the architectures that support the
  clk framework. The goal is to introduce some Kunit tests for the
  framework.

  Outside of the core framework we have the usual set of various driver
  updates and non-critical fixes. The dirstat shows that the new
  Baikal-T1 driver is the largest addition this time around in terms of
  lines of code. After that the x86 (Intel), Qualcomm, and Mediatek
  drivers introduce many lines to support new or upcoming SoCs. After
  that the dirstat shows the usual suspects working on their SoC support
  by fixing minor bugs, correcting data and converting some of their DT
  bindings to YAML.

  Core:
   - Allow the COMMON_CLK config to be selectable

  New Drivers:
   - Clk driver for Baikal-T1 SoCs
   - Mediatek MT6765 clock support
   - Support for Intel Agilex clks
   - Add support for X1830 and X1000 Ingenic SoC clk controllers
   - Add support for the new Renesas RZ/G1H (R8A7742) SoC
   - Add support for Qualcomm's MSM8939 Generic Clock Controller

  Updates:
   - Support IDT VersaClock 5P49V5925
   - Bunch of updates for HSDK clock generation unit (CGU) driver
   - Start making audio and GPU clks work on Marvell MMP2/MMP3 SoCs
   - Add some GPU, NPU, and UFS clks to Qualcomm SM8150 driver
   - Enable supply regulators for GPU gdscs on Qualcomm SoCs
   - Add support for Si5342, Si5344 and Si5345 chips
   - Support custom flags in Xilinx zynq firmware
   - Various small fixes to the Xilinx clk driver
   - A single minor rounding fix for the legacy Allwinner clock support
   - A few patches from Abel Vesa as preparation of adding audiomix
     clock support on i.MX
   - A couple of cleanups from Anson Huang for i.MX clk-sscg-pll and
     clk-pllv3 drivers
   - Drop dependency on ARM64 for i.MX8M clock driver, to support
     aarch32 mode on aarch64 hardware
   - A series from Peng Fan to improve i.MX8M clock drivers, using
     composite clock for core and bus clk slice
   - Set a better parent clock for flexcan on i.MX6UL to support CiA102
     defined bit rates
   - A couple changes for EMC frequency scaling on Tegra210
   - Support for CPU frequency scaling on Tegra20/Tegra30
   - New clk gate for CSI test pattern generator on Tegra210
   - Regression fixes for Samsung exynos542x and exynos5433 SoCs
   - Use of fallthrough; attribute for Samsung s3c24xx
   - Updates and fixup HDMI and video clocks on Meson8b
   - Fixup reset polarity on Meson8b
   - Fix GPU glitch free mux switch on Meson gx and g12
   - A minor fix for the currently unused suspend/resume handling on
     Renesas RZ/A1 and RZ/A2
   - Two more conversions of Renesas DT bindings to json-schema
   - Add support for the USB 2.0 clock selector on Renesas R-Car M3-W+"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (155 commits)
  clk: mediatek: Remove ifr{0,1}_cfg_regs structures
  clk: baikal-t1: remove redundant assignment to variable 'divider'
  clk: baikal-t1: fix spelling mistake "Uncompatible" -> "Incompatible"
  dt-bindings: clock: Add a missing include to MMP Audio Clock binding
  dt: Add bindings for IDT VersaClock 5P49V5925
  clk: vc5: Add support for IDT VersaClock 5P49V6965
  clk: Add Baikal-T1 CCU Dividers driver
  clk: Add Baikal-T1 CCU PLLs driver
  dt-bindings: clk: Add Baikal-T1 CCU Dividers binding
  dt-bindings: clk: Add Baikal-T1 CCU PLLs binding
  clk: mediatek: assign the initial value to clk_init_data of mtk_mux
  clk: mediatek: Add MT6765 clock support
  clk: mediatek: add mt6765 clock IDs
  dt-bindings: clock: mediatek: document clk bindings vcodecsys for Mediatek MT6765 SoC
  dt-bindings: clock: mediatek: document clk bindings mipi0a for Mediatek MT6765 SoC
  dt-bindings: clock: mediatek: document clk bindings for Mediatek MT6765 SoC
  CLK: HSDK: CGU: add support for 148.5MHz clock
  CLK: HSDK: CGU: support PLL bypassing
  CLK: HSDK: CGU: check if PLL is bypassed first
  clk: clk-si5341: Add support for the Si5345 series
  ...
2020-06-10 11:42:19 -07:00
Michel Lespinasse 3e4e28c5a8 mmap locking API: convert mmap_sem API comments
Convert comments that reference old mmap_sem APIs to reference
corresponding new mmap locking APIs instead.

Signed-off-by: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Davidlohr Bueso <dbueso@suse.de>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Laurent Dufour <ldufour@linux.ibm.com>
Cc: Liam Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ying Han <yinghan@google.com>
Link: http://lkml.kernel.org/r/20200520052908.204642-12-walken@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 09:39:14 -07:00
Michel Lespinasse 89154dd531 mmap locking API: convert mmap_sem call sites missed by coccinelle
Convert the last few remaining mmap_sem rwsem calls to use the new mmap
locking API.  These were missed by coccinelle for some reason (I think
coccinelle does not support some of the preprocessor constructs in these
files ?)

[akpm@linux-foundation.org: convert linux-next leftovers]
[akpm@linux-foundation.org: more linux-next leftovers]
[akpm@linux-foundation.org: more linux-next leftovers]

Signed-off-by: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Liam Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ying Han <yinghan@google.com>
Link: http://lkml.kernel.org/r/20200520052908.204642-6-walken@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 09:39:14 -07:00
Michel Lespinasse d8ed45c5dc mmap locking API: use coccinelle to convert mmap_sem rwsem call sites
This change converts the existing mmap_sem rwsem calls to use the new mmap
locking API instead.

The change is generated using coccinelle with the following rule:

// spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir .

@@
expression mm;
@@
(
-init_rwsem
+mmap_init_lock
|
-down_write
+mmap_write_lock
|
-down_write_killable
+mmap_write_lock_killable
|
-down_write_trylock
+mmap_write_trylock
|
-up_write
+mmap_write_unlock
|
-downgrade_write
+mmap_write_downgrade
|
-down_read
+mmap_read_lock
|
-down_read_killable
+mmap_read_lock_killable
|
-down_read_trylock
+mmap_read_trylock
|
-up_read
+mmap_read_unlock
)
-(&mm->mmap_sem)
+(mm)

Signed-off-by: Michel Lespinasse <walken@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Reviewed-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Davidlohr Bueso <dbueso@suse.de>
Cc: David Rientjes <rientjes@google.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Liam Howlett <Liam.Howlett@oracle.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ying Han <yinghan@google.com>
Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 09:39:14 -07:00
Mike Rapoport 974b9b2c68 mm: consolidate pte_index() and pte_offset_*() definitions
All architectures define pte_index() as

	(address >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)

and all architectures define pte_offset_kernel() as an entry in the array
of PTEs indexed by the pte_index().

For the most architectures the pte_offset_kernel() implementation relies
on the availability of pmd_page_vaddr() that converts a PMD entry value to
the virtual address of the page containing PTEs array.

Let's move x86 definitions of the PTE accessors to the generic place in
<linux/pgtable.h> and then simply drop the respective definitions from the
other architectures.

The architectures that didn't provide pmd_page_vaddr() are updated to have
that defined.

The generic implementation of pte_offset_kernel() can be overridden by an
architecture and alpha makes use of this because it has special ordering
requirements for its version of pte_offset_kernel().

[rppt@linux.ibm.com: v2]
  Link: http://lkml.kernel.org/r/20200514170327.31389-11-rppt@kernel.org
[rppt@linux.ibm.com: update]
  Link: http://lkml.kernel.org/r/20200514170327.31389-12-rppt@kernel.org
[rppt@linux.ibm.com: update]
  Link: http://lkml.kernel.org/r/20200514170327.31389-13-rppt@kernel.org
[akpm@linux-foundation.org: fix x86 warning]
[sfr@canb.auug.org.au: fix powerpc build]
  Link: http://lkml.kernel.org/r/20200607153443.GB738695@linux.ibm.com

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-10-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 09:39:14 -07:00
Mike Rapoport e05c7b1f2b mm: pgtable: add shortcuts for accessing kernel PMD and PTE
The powerpc 32-bit implementation of pgtable has nice shortcuts for
accessing kernel PMD and PTE for a given virtual address.  Make these
helpers available for all architectures.

[rppt@linux.ibm.com: microblaze: fix page table traversal in setup_rt_frame()]
  Link: http://lkml.kernel.org/r/20200518191511.GD1118872@kernel.org
[akpm@linux-foundation.org: s/pmd_ptr_k/pmd_off_k/ in various powerpc places]

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-9-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 09:39:13 -07:00
Mike Rapoport 65fddcfca8 mm: reorder includes after introduction of linux/pgtable.h
The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include
of the latter in the middle of asm includes.  Fix this up with the aid of
the below script and manual adjustments here and there.

	import sys
	import re

	if len(sys.argv) is not 3:
	    print "USAGE: %s <file> <header>" % (sys.argv[0])
	    sys.exit(1)

	hdr_to_move="#include <linux/%s>" % sys.argv[2]
	moved = False
	in_hdrs = False

	with open(sys.argv[1], "r") as f:
	    lines = f.readlines()
	    for _line in lines:
		line = _line.rstrip('
')
		if line == hdr_to_move:
		    continue
		if line.startswith("#include <linux/"):
		    in_hdrs = True
		elif not moved and in_hdrs:
		    moved = True
		    print hdr_to_move
		print line

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 09:39:13 -07:00
Mike Rapoport ca5999fde0 mm: introduce include/linux/pgtable.h
The include/linux/pgtable.h is going to be the home of generic page table
manipulation functions.

Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and
make the latter include asm/pgtable.h.

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 09:39:13 -07:00
Mike Rapoport e31cf2f4ca mm: don't include asm/pgtable.h if linux/mm.h is already included
Patch series "mm: consolidate definitions of page table accessors", v2.

The low level page table accessors (pXY_index(), pXY_offset()) are
duplicated across all architectures and sometimes more than once.  For
instance, we have 31 definition of pgd_offset() for 25 supported
architectures.

Most of these definitions are actually identical and typically it boils
down to, e.g.

static inline unsigned long pmd_index(unsigned long address)
{
        return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1);
}

static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address)
{
        return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address);
}

These definitions can be shared among 90% of the arches provided
XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined.

For architectures that really need a custom version there is always
possibility to override the generic version with the usual ifdefs magic.

These patches introduce include/linux/pgtable.h that replaces
include/asm-generic/pgtable.h and add the definitions of the page table
accessors to the new header.

This patch (of 12):

The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the
functions involving page table manipulations, e.g.  pte_alloc() and
pmd_alloc().  So, there is no point to explicitly include <asm/pgtable.h>
in the files that include <linux/mm.h>.

The include statements in such cases are remove with a simple loop:

	for f in $(git grep -l "include <linux/mm.h>") ; do
		sed -i -e '/include <asm\/pgtable.h>/ d' $f
	done

Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Ungerer <gerg@linux-m68k.org>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Guo Ren <guoren@kernel.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Ley Foon Tan <ley.foon.tan@intel.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Nick Hu <nickhu@andestech.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Rich Felker <dalias@libc.org>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Will Deacon <will@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org
Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 09:39:13 -07:00
Dmitry Safonov 9cb8f069de kernel: rename show_stack_loglvl() => show_stack()
Now the last users of show_stack() got converted to use an explicit log
level, show_stack_loglvl() can drop it's redundant suffix and become once
again well known show_stack().

Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20200418201944.482088-51-dima@arista.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 09:39:13 -07:00
Dmitry Safonov 96f0458a96 mips: add show_stack_loglvl()
Currently, the log-level of show_stack() depends on a platform
realization.  It creates situations where the headers are printed with
lower log level or higher than the stacktrace (depending on a platform or
user).

Furthermore, it forces the logic decision from user to an architecture
side.  In result, some users as sysrq/kdb/etc are doing tricks with
temporary rising console_loglevel while printing their messages.  And in
result it not only may print unwanted messages from other CPUs, but also
omit printing at all in the unlucky case where the printk() was deferred.

Introducing log-level parameter and KERN_UNSUPPRESSED [1] seems an easier
approach than introducing more printk buffers.  Also, it will consolidate
printings with headers.

Introduce show_stack_loglvl(), that eventually will substitute
show_stack().

[1]: https://lore.kernel.org/lkml/20190528002412.1625-1-dima@arista.com/T/#u

Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: James Hogan <jhogan@kernel.org>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Link: http://lkml.kernel.org/r/20200418201944.482088-22-dima@arista.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 09:39:11 -07:00
Dmitry Safonov 2062a4e8ae kallsyms/printk: add loglvl to print_ip_sym()
Patch series "Add log level to show_stack()", v3.

Add log level argument to show_stack().

Done in three stages:
1. Introducing show_stack_loglvl() for every architecture
2. Migrating old users with an explicit log level
3. Renaming show_stack_loglvl() into show_stack()

Justification:

- It's a design mistake to move a business-logic decision into platform
  realization detail.

- I have currently two patches sets that would benefit from this work:
  Removing console_loglevel jumps in sysrq driver [1] Hung task warning
  before panic [2] - suggested by Tetsuo (but he probably didn't realise
  what it would involve).

- While doing (1), (2) the backtraces were adjusted to headers and other
  messages for each situation - so there won't be a situation when the
  backtrace is printed, but the headers are missing because they have
  lesser log level (or the reverse).

- As the result in (2) plays with console_loglevel for kdb are removed.

The least important for upstream, but maybe still worth to note that every
company I've worked in so far had an off-list patch to print backtrace
with the needed log level (but only for the architecture they cared
about).  If you have other ideas how you will benefit from show_stack()
with a log level - please, reply to this cover letter.

See also discussion on v1:
https://lore.kernel.org/linux-riscv/20191106083538.z5nlpuf64cigxigh@pathway.suse.cz/

This patch (of 50):

print_ip_sym() needs to have a log level parameter to comply with other
parts being printed.  Otherwise, half of the expected backtrace would be
printed and other may be missing with some logging level.

The following callee(s) are using now the adjusted log level:
- microblaze/unwind: the same level as headers & userspace unwind.
  Note that pr_debug()'s there are for debugging the unwinder itself.
- nds32/traps: symbol addresses are printed with the same log level
  as backtrace headers.
- lockdep: ip for locking issues is printed with the same log level
  as other part of the warning.
- sched: ip where preemption was disabled is printed as error like
  the rest part of the message.
- ftrace: bug reports are now consistent in the log level being used.

Signed-off-by: Dmitry Safonov <dima@arista.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Ben Segall <bsegall@google.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Greentime Hu <green.hu@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: James Hogan <jhogan@kernel.org>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Michal Simek <monstr@monstr.eu>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Burton <paulburton@kernel.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vincent Chen <deanbo422@gmail.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Will Deacon <will@kernel.org>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Dmitry Safonov <dima@arista.com>
Cc: Jiri Slaby <jslaby@suse.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Matt Turner <mattst88@gmail.com>
Cc: Richard Henderson <rth@twiddle.net>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Aurelien Jacquiot <jacquiot.aurelien@gmail.com>
Cc: Mark Salter <msalter@redhat.com>
Cc: Guo Ren <guoren@kernel.org>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Cc: Brian Cain <bcain@codeaurora.org>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Tony Luck <tony.luck@intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ley Foon Tan <lftan@altera.com>
Cc: Jonas Bonn <jonas@southpole.se>
Cc: Stafford Horne <shorne@gmail.com>
Cc: Stefan Kristiansson <stefan.kristiansson@saunalahti.fi>
Cc: Helge Deller <deller@gmx.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Rich Felker <dalias@libc.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Jeff Dike <jdike@addtoit.com>
Cc: Richard Weinberger <richard@nod.at>
Cc: Guan Xuetao <gxt@pku.edu.cn>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Daniel Thompson <daniel.thompson@linaro.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Jason Wessel <jason.wessel@windriver.com>
Link: http://lkml.kernel.org/r/20200418201944.482088-2-dima@arista.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09 09:39:10 -07:00
Linus Torvalds 081096d98b TTY/Serial driver updates for 5.8-rc1
Here is the tty and serial driver updates for 5.8-rc1
 
 Nothing huge at all, just a lot of little serial driver fixes, updates
 for new devices and features, and other small things.  Full details are
 in the shortlog.
 
 Note, you will get a conflict merging with your tree in the
 Documentation/devicetree/bindings/serial/rs485.yaml file, but it should
 be pretty obvious what to do.  If not, I'm sure Rob will clean it all up
 afterwards :)
 
 All of these have been in linux-next with no issues for a while.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCXtzpCg8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ylRxACgjGtOKPjahONL4lWd0F8ZYEcyw7sAn34woBCO
 BDUV3kolrRQ4OYNJWsHP
 =TvqG
 -----END PGP SIGNATURE-----

Merge tag 'tty-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver updates from Greg KH:
 "Here is the tty and serial driver updates for 5.8-rc1

  Nothing huge at all, just a lot of little serial driver fixes, updates
  for new devices and features, and other small things. Full details are
  in the shortlog.

  All of these have been in linux-next with no issues for a while"

* tag 'tty-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (67 commits)
  tty: serial: qcom_geni_serial: Add 51.2MHz frequency support
  tty: serial: imx: clear Ageing Timer Interrupt in handler
  serial: 8250_fintek: Add F81966 Support
  sc16is7xx: Add flag to activate IrDA mode
  dt-bindings: sc16is7xx: Add flag to activate IrDA mode
  serial: 8250: Support rs485 bus termination GPIO
  serial: 8520_port: Fix function param documentation
  dt-bindings: serial: Add binding for rs485 bus termination GPIO
  vt: keyboard: avoid signed integer overflow in k_ascii
  serial: 8250: Enable 16550A variants by default on non-x86
  tty: hvc_console, fix crashes on parallel open/close
  serial: imx: Initialize lock for non-registered console
  sc16is7xx: Read the LSR register for basic device presence check
  sc16is7xx: Allow sharing the IRQ line
  sc16is7xx: Use threaded IRQ
  sc16is7xx: Always use falling edge IRQ
  tty: n_gsm: Fix bogus i++ in gsm_data_kick
  tty: n_gsm: Remove unnecessary test in gsm_print_packet()
  serial: stm32: add no_console_suspend support
  tty: serial: fsl_lpuart: Use __maybe_unused instead of #if CONFIG_PM_SLEEP
  ...
2020-06-07 09:52:36 -07:00
Ira Weiny 090e77e166 kmap: consolidate kmap_prot definitions
Most architectures define kmap_prot to be PAGE_KERNEL.

Let sparc and xtensa define there own and define PAGE_KERNEL as the
default if not overridden.

[akpm@linux-foundation.org: coding style fixes]
Suggested-by: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20200507150004.1423069-16-ira.weiny@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04 19:06:22 -07:00
Ira Weiny 20b271dfe9 arch/kmap: define kmap_atomic_prot() for all arch's
To support kmap_atomic_prot(), all architectures need to support
protections passed to their kmap_atomic_high() function.  Pass protections
into kmap_atomic_high() and change the name to kmap_atomic_high_prot() to
match.

Then define kmap_atomic_prot() as a core function which calls
kmap_atomic_high_prot() when needed.

Finally, redefine kmap_atomic() as a wrapper of kmap_atomic_prot() with
the default kmap_prot exported by the architectures.

Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20200507150004.1423069-11-ira.weiny@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04 19:06:22 -07:00
Ira Weiny d8c25836fa arch/kmap: don't hard code kmap_prot values
To support kmap_atomic_prot() on all architectures each arch must support
protections passed in to them.

Change csky, mips, nds32 and xtensa to use their global constant kmap_prot
rather than a hard coded value which was equal.

Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20200507150004.1423069-10-ira.weiny@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04 19:06:22 -07:00
Ira Weiny abca2500c0 arch/kunmap_atomic: consolidate duplicate code
Every single architecture (including !CONFIG_HIGHMEM) calls...

	pagefault_enable();
	preempt_enable();

... before returning from __kunmap_atomic().  Lift this code into the
kunmap_atomic() macro.

While we are at it rename __kunmap_atomic() to kunmap_atomic_high() to
be consistent.

[ira.weiny@intel.com: don't enable pagefault/preempt twice]
  Link: http://lkml.kernel.org/r/20200518184843.3029640-1-ira.weiny@intel.com
[akpm@linux-foundation.org: coding style fixes]
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Guenter Roeck <linux@roeck-us.net>
Link: http://lkml.kernel.org/r/20200507150004.1423069-8-ira.weiny@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04 19:06:22 -07:00
Ira Weiny 78b6d91ec7 arch/kmap_atomic: consolidate duplicate code
Every arch has the same code to ensure atomic operations and a check for
!HIGHMEM page.

Remove the duplicate code by defining a core kmap_atomic() which only
calls the arch specific kmap_atomic_high() when the page is high memory.

[akpm@linux-foundation.org: coding style fixes]
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20200507150004.1423069-7-ira.weiny@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04 19:06:22 -07:00
Ira Weiny e23c45976f arch/kunmap: remove duplicate kunmap implementations
All architectures do exactly the same thing for kunmap(); remove all the
duplicate definitions and lift the call to the core.

This also has the benefit of changing kmap_unmap() on a number of
architectures to be an inline call rather than an actual function.

[akpm@linux-foundation.org: fix CONFIG_HIGHMEM=n build on various architectures]
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20200507150004.1423069-5-ira.weiny@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04 19:06:22 -07:00
Ira Weiny 525aaf9bad arch/kmap: remove redundant arch specific kmaps
The kmap code for all the architectures is almost 100% identical.

Lift the common code to the core.  Use ARCH_HAS_KMAP_FLUSH_TLB to indicate
if an arch defines kmap_flush_tlb() and call if if needed.

This also has the benefit of changing kmap() on a number of architectures
to be an inline call rather than an actual function.

Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Christian König <christian.koenig@amd.com>
Cc: Chris Zankel <chris@zankel.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Helge Deller <deller@gmx.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20200507150004.1423069-4-ira.weiny@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04 19:06:22 -07:00
Ira Weiny 01c4b788e0 arch/kmap: remove BUG_ON()
Patch series "Remove duplicated kmap code", v3.

The kmap infrastructure has been copied almost verbatim to every
architecture.  This series consolidates obvious duplicated code by
defining core functions which call into the architectures only when
needed.

Some of the k[un]map_atomic() implementations have some similarities but
the similarities were not sufficient to warrant further changes.

In addition we remove a duplicate implementation of kmap() in DRM.

This patch (of 15):

Replace the use of BUG_ON(in_interrupt()) in the kmap() and kunmap() in
favor of might_sleep().

Besides the benefits of might_sleep(), this normalizes the implementations
such that they can be made generic in subsequent patches.

Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christian König <christian.koenig@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
Cc: Helge Deller <deller@gmx.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Chris Zankel <chris@zankel.net>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Link: http://lkml.kernel.org/r/20200507150004.1423069-1-ira.weiny@intel.com
Link: http://lkml.kernel.org/r/20200507150004.1423069-2-ira.weiny@intel.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04 19:06:22 -07:00
Huacai Chen 0f78355c45 KVM: MIPS: Enable KVM support for Loongson-3
This patch enable KVM support for Loongson-3 by selecting HAVE_KVM, but
only enable KVM/VZ on Loongson-3A R4+ (because VZ of early processors
are incomplete). Besides, Loongson-3 support SMP guests, so we clear the
linked load bit of LLAddr in kvm_vz_vcpu_load() if the guest has more
than one VCPUs.

Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <1590220602-3547-15-git-send-email-chenhc@lemote.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-04 13:51:53 -04:00
Huacai Chen dc6d95b153 KVM: MIPS: Add more MMIO load/store instructions emulation
This patch add more MMIO load/store instructions emulation, which can
be observed in QXL and some other device drivers:

1, LWL, LWR, LDW, LDR, SWL, SWR, SDL and SDR for all MIPS;
2, GSLBX, GSLHX, GSLWX, GSLDX, GSSBX, GSSHX, GSSWX and GSSDX for
   Loongson-3.

Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <1590220602-3547-14-git-send-email-chenhc@lemote.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-04 13:51:49 -04:00
Huacai Chen 8a5097ee90 KVM: MIPS: Add CONFIG6 and DIAG registers emulation
Loongson-3 has CONFIG6 and DIAG registers which need to be emulated.
CONFIG6 is mostly used to enable/disable FTLB and SFB, while DIAG is
mostly used to flush BTB, ITLB, DTLB, VTLB and FTLB.

Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <1590220602-3547-13-git-send-email-chenhc@lemote.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-04 13:51:45 -04:00
Huacai Chen 7f2a83f1c2 KVM: MIPS: Add CPUCFG emulation for Loongson-3
Loongson-3 overrides lwc2 instructions to implement CPUCFG and CSR
read/write functions. These instructions all cause guest exit so CSR
doesn't benifit KVM guest (and there are always legacy methods to
provide the same functions as CSR). So, we only emulate CPUCFG and let
it return a reduced feature list (which means the virtual CPU doesn't
have any other advanced features, including CSR) in KVM.

Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <1590220602-3547-12-git-send-email-chenhc@lemote.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-04 13:51:33 -04:00
Huacai Chen f21db3090d KVM: MIPS: Add Loongson-3 Virtual IPI interrupt support
This patch add Loongson-3 Virtual IPI interrupt support in the kernel.
The current implementation of IPI emulation in QEMU is based on GIC for
MIPS, but Loongson-3 doesn't use GIC. Furthermore, IPI emulation in QEMU
is too expensive for performance (because of too many context switches
between Host and Guest). With current solution, the IPI delay may even
cause RCU stall warnings in a multi-core Guest. So, we design a faster
solution that emulate IPI interrupt in kernel (only used by Loongson-3
now).

Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <1590220602-3547-11-git-send-email-chenhc@lemote.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-04 13:50:39 -04:00
Huacai Chen 3f51d8fcac KVM: MIPS: Add more types of virtual interrupts
In current implementation, MIPS KVM uses IP2, IP3, IP4 and IP7 for
external interrupt, two kinds of IPIs and timer interrupt respectively,
but Loongson-3 based machines prefer to use IP2, IP3, IP6 and IP7 for
two kinds of external interrupts, IPI and timer interrupt. So we define
two priority-irq mapping tables: kvm_loongson3_priority_to_irq[] for
Loongson-3, and kvm_default_priority_to_irq[] for others. The virtual
interrupt infrastructure is updated to deliver all types of interrupts
from IP2, IP3, IP4, IP6 and IP7.

Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <1590220602-3547-10-git-send-email-chenhc@lemote.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-04 13:49:13 -04:00
Huacai Chen 49bb96003f KVM: MIPS: Let indexed cacheops cause guest exit on Loongson-3
Loongson-3's indexed cache operations need a node-id in the address,
but in KVM guest the node-id may be incorrect. So, let indexed cache
operations cause guest exit on Loongson-3.

Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <1590220602-3547-9-git-send-email-chenhc@lemote.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-04 13:49:08 -04:00
Huacai Chen 52c07e1cbb KVM: MIPS: Use root tlb to control guest's CCA for Loongson-3
KVM guest has two levels of address translation: guest tlb translates
GVA to GPA, and root tlb translates GPA to HPA. By default guest's CCA
is controlled by guest tlb, but Loongson-3 maintains all cache coherency
by hardware (including multi-core coherency and I/O DMA coherency) so it
prefers all guest mappings be cacheable mappings. Thus, we use root tlb
to control guest's CCA for Loongson-3.

Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <1590220602-3547-8-git-send-email-chenhc@lemote.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-04 13:49:04 -04:00
Huacai Chen 3210e2c279 KVM: MIPS: Introduce and use cpu_guest_has_ldpte
Loongson-3 has lddir/ldpte instructions and their related CP0 registers
are the same as HTW. So we introduce a cpu_guest_has_ldpte flag and use
it to indicate whether we need to save/restore HTW related CP0 registers
(PWBase, PWSize, PWField and PWCtl).

Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <1590220602-3547-7-git-send-email-chenhc@lemote.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-04 13:49:00 -04:00
Huacai Chen 8bf3129503 KVM: MIPS: Use lddir/ldpte instructions to lookup gpa_mm.pgd
Loongson-3 can use lddir/ldpte instuctions to accelerate page table
walking, so use them to lookup gpa_mm.pgd.

Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <1590220602-3547-6-git-send-email-chenhc@lemote.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-04 13:48:55 -04:00
Huacai Chen bf10efbb81 KVM: MIPS: Add EVENTFD support which is needed by VHOST
Add EVENTFD support for KVM/MIPS, which is needed by VHOST. Tested on
Loongson-3 platform.

Reviewed-by: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com>
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Co-developed-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Message-Id: <1590220602-3547-5-git-send-email-chenhc@lemote.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-06-04 13:48:51 -04:00