We should remove O_NONBLOCK flag when calling sock->ops->connect()
in sctp_connect_to_sock() function.
Why?
1. up to now, sctp socket connect() function ignores the flag argument,
that means O_NONBLOCK flag does not take effect, then we should remove
it to avoid the confusion (but is not urgent).
2. for the future, there will be a patch to fix this problem, then the flag
argument will take effect, the patch has been queued at https://git.kernel.o
rg/pub/scm/linux/kernel/git/davem/net.git/commit/net/sctp?id=644fbdeacf1d3ed
d366e44b8ba214de9d1dd66a9.
But, the O_NONBLOCK flag will make sock->ops->connect() directly return
without any wait time, then the connection will not be established, DLM kernel
module will call sock->ops->connect() again and again, the bad results are,
CPU usage is almost 100%, even trigger soft_lockup problem if the related
configurations are enabled,
DLM kernel module also prints lots of messages like,
[Fri Apr 27 11:23:43 2018] dlm: connecting to 172167592
[Fri Apr 27 11:23:43 2018] dlm: connecting to 172167592
[Fri Apr 27 11:23:43 2018] dlm: connecting to 172167592
[Fri Apr 27 11:23:43 2018] dlm: connecting to 172167592
The upper application (e.g. ocfs2 mount command) is hanged at new_lockspace(),
the whole backtrace is as below,
tb0307-nd2:~ # cat /proc/2935/stack
[<0>] new_lockspace+0x957/0xac0 [dlm]
[<0>] dlm_new_lockspace+0xae/0x140 [dlm]
[<0>] user_cluster_connect+0xc3/0x3a0 [ocfs2_stack_user]
[<0>] ocfs2_cluster_connect+0x144/0x220 [ocfs2_stackglue]
[<0>] ocfs2_dlm_init+0x215/0x440 [ocfs2]
[<0>] ocfs2_fill_super+0xcb0/0x1290 [ocfs2]
[<0>] mount_bdev+0x173/0x1b0
[<0>] mount_fs+0x35/0x150
[<0>] vfs_kern_mount.part.23+0x54/0x100
[<0>] do_mount+0x59a/0xc40
[<0>] SyS_mount+0x80/0xd0
[<0>] do_syscall_64+0x76/0x140
[<0>] entry_SYSCALL_64_after_hwframe+0x42/0xb7
[<0>] 0xffffffffffffffff
So, I think we should remove O_NONBLOCK flag here, since DLM kernel module can
not handle non-block sockect in connect() properly.
Signed-off-by: Gang He <ghe@suse.com>
Signed-off-by: David Teigland <teigland@redhat.com>
When the user setup a two-ring cluster, DLM kernel module
will automatically selects to use SCTP protocol to communicate
between each node. There will be about 5 minute hang in DLM
kernel module, in case one ring is broken before switching to
another ring, this will potentially affect the dependent upper
applications, e.g. ocfs2, gfs2, clvm and clustered-MD, etc.
Unfortunately, if the user setup a two-ring cluster, we can not
specify DLM communication protocol with TCP explicitly, since
DLM kernel module only supports SCTP protocol for multiple
ring cluster.
Base on my investigation, the time is spent in sock->ops->connect()
function before returns ETIMEDOUT(-110) error, since O_NONBLOCK
argument in connect() function does not work here, then we should
make sock->ops->connect() function return in specified time via
setting socket SO_SNDTIMEO atrribute.
Signed-off-by: Gang He <ghe@suse.com>
Signed-off-by: David Teigland <teigland@redhat.com>
There is a clerical error when turn off Nagle's algorithm in
sctp_connect_to_sock() function, this results in turn off
Nagle's algorithm failure.
After this correction, DLM performance will be improved obviously
when using SCTP procotol.
Signed-off-by: Gang He <ghe@suse.com>
Signed-off-by: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: David Teigland <teigland@redhat.com>
Changes since v1:
Added changes in these files:
drivers/infiniband/hw/usnic/usnic_transport.c
drivers/staging/lustre/lnet/lnet/lib-socket.c
drivers/target/iscsi/iscsi_target_login.c
drivers/vhost/net.c
fs/dlm/lowcomms.c
fs/ocfs2/cluster/tcp.c
security/tomoyo/network.c
Before:
All these functions either return a negative error indicator,
or store length of sockaddr into "int *socklen" parameter
and return zero on success.
"int *socklen" parameter is awkward. For example, if caller does not
care, it still needs to provide on-stack storage for the value
it does not need.
None of the many FOO_getname() functions of various protocols
ever used old value of *socklen. They always just overwrite it.
This change drops this parameter, and makes all these functions, on success,
return length of sockaddr. It's always >= 0 and can be differentiated
from an error.
Tests in callers are changed from "if (err)" to "if (err < 0)", where needed.
rpc_sockname() lost "int buflen" parameter, since its only use was
to be passed to kernel_getsockname() as &buflen and subsequently
not used in any way.
Userspace API is not changed.
text data bss dec hex filename
30108430 2633624 873672 33615726 200ef6e vmlinux.before.o
30108109 2633612 873672 33615393 200ee21 vmlinux.o
Signed-off-by: Denys Vlasenko <dvlasenk@redhat.com>
CC: David S. Miller <davem@davemloft.net>
CC: linux-kernel@vger.kernel.org
CC: netdev@vger.kernel.org
CC: linux-bluetooth@vger.kernel.org
CC: linux-decnet-user@lists.sourceforge.net
CC: linux-wireless@vger.kernel.org
CC: linux-rdma@vger.kernel.org
CC: linux-sctp@vger.kernel.org
CC: linux-nfs@vger.kernel.org
CC: linux-x25@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
This is the mindless scripted replacement of kernel use of POLL*
variables as described by Al, done by this script:
for V in IN OUT PRI ERR RDNORM RDBAND WRNORM WRBAND HUP RDHUP NVAL MSG; do
L=`git grep -l -w POLL$V | grep -v '^t' | grep -v /um/ | grep -v '^sa' | grep -v '/poll.h$'|grep -v '^D'`
for f in $L; do sed -i "-es/^\([^\"]*\)\(\<POLL$V\>\)/\\1E\\2/" $f; done
done
with de-mangling cleanups yet to come.
NOTE! On almost all architectures, the EPOLL* constants have the same
values as the POLL* constants do. But they keyword here is "almost".
For various bad reasons they aren't the same, and epoll() doesn't
actually work quite correctly in some cases due to this on Sparc et al.
The next patch from Al will sort out the final differences, and we
should be all done.
Scripted-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull kern_recvmsg reduction from Al Viro:
"kernel_recvmsg() is a set_fs()-using wrapper for sock_recvmsg(). In
all but one case that is not needed - use of ITER_KVEC for ->msg_iter
takes care of the data and does not care about set_fs(). The only
exception is svc_udp_recvfrom() where we want cmsg to be store into
kernel object; everything else can just use sock_recvmsg() and be done
with that.
A followup converting svc_udp_recvfrom() away from set_fs() (and
killing kernel_recvmsg() off) is *NOT* in here - I'd like to hear what
netdev folks think of the approach proposed in that followup)"
* 'work.sock_recvmsg' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
tipc: switch to sock_recvmsg()
smc: switch to sock_recvmsg()
ipvs: switch to sock_recvmsg()
mISDN: switch to sock_recvmsg()
drbd: switch to sock_recvmsg()
lustre lnet_sock_read(): switch to sock_recvmsg()
cfs2: switch to sock_recvmsg()
ncpfs: switch to sock_recvmsg()
dlm: switch to sock_recvmsg()
svc_recvfrom(): switch to sock_recvmsg()
- proper use of the bool type (Thomas Meyer)
- constification of struct config_item_type (Bhumika Goyal)
-----BEGIN PGP SIGNATURE-----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=+tMO
-----END PGP SIGNATURE-----
Merge tag 'configfs-for-4.15' of git://git.infradead.org/users/hch/configfs
Pull configfs updates from Christoph Hellwig:
"A couple of configfs cleanups:
- proper use of the bool type (Thomas Meyer)
- constification of struct config_item_type (Bhumika Goyal)"
* tag 'configfs-for-4.15' of git://git.infradead.org/users/hch/configfs:
RDMA/cma: make config_item_type const
stm class: make config_item_type const
ACPI: configfs: make config_item_type const
nvmet: make config_item_type const
usb: gadget: configfs: make config_item_type const
PCI: endpoint: make config_item_type const
iio: make function argument and some structures const
usb: gadget: make config_item_type structures const
dlm: make config_item_type const
netconsole: make config_item_type const
nullb: make config_item_type const
ocfs2/cluster: make config_item_type const
target: make config_item_type const
configfs: make ci_type field, some pointers and function arguments const
configfs: make config_item_type const
configfs: Fix bool initialization/comparison
This set focuses, as usual, on fixes to the comms layer.
New testing of the dlm with ocfs2 uncovered a number of
bugs in the TCP connection handling during recovery,
starting, and stopping.
-----BEGIN PGP SIGNATURE-----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=w3jk
-----END PGP SIGNATURE-----
Merge tag 'dlm-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
"This set focuses, as usual, on fixes to the comms layer.
New testing of the dlm with ocfs2 uncovered a number of bugs in the
TCP connection handling during recovery, starting, and stopping"
* tag 'dlm-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm:
dlm: remove dlm_send_rcom_lookup_dump
dlm: recheck kthread_should_stop() before schedule()
DLM: fix NULL pointer dereference in send_to_sock()
DLM: fix to reschedule rwork
DLM: fix to use sk_callback_lock correctly
DLM: fix overflow dlm_cb_seq
DLM: fix memory leak in tcp_accept_from_sock()
DLM: fix conversion deadlock when DLM_LKF_NODLCKWT flag is set
DLM: use CF_CLOSE flag to stop dlm_send correctly
DLM: Reanimate CF_WRITE_PENDING flag
DLM: fix race condition between dlm_recoverd_stop and dlm_recoverd
DLM: close othercon at send/receive error
DLM: retry rcom when dlm_wait_function is timed out.
DLM: fix to use sock_mutex correctly in xxx_accept_from_sock
DLM: fix race condition between dlm_send and dlm_recv
DLM: fix double list_del()
DLM: fix remove save_cb argument from add_sock()
DLM: Fix saving of NULL callbacks
DLM: Eliminate CF_WRITE_PENDING flag
DLM: Eliminate CF_CONNECT_PENDING flag
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make config_item_type structures const as they are either passed to a
function having the argument as const or stored in the const "ci_type"
field of a config_item structure.
Done using Coccinelle.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
This function was only for debugging. It would be
called in a condition that should not happen, and
should probably have been removed from the final
version of the original commit.
Remove it because it does mutex lock under spin lock.
Signed-off-by: David Teigland <teigland@redhat.com>
Call schedule() here could make the thread miss wake
up from kthread_stop(), so it is better to recheck
kthread_should_stop() before call schedule(), a symptom
happened when I run indefinite test (which mostly created
clustered raid1, assemble it in other nodes, then stop
them) of clustered raid.
$ ps aux|grep md|grep D
root 4211 0.0 0.0 19760 2220 ? Ds 02:58 0:00 mdadm -Ssq
$ cat /proc/4211/stack
kthread_stop+0x4d/0x150
dlm_recoverd_stop+0x15/0x20 [dlm]
dlm_release_lockspace+0x2ab/0x460 [dlm]
leave+0xbf/0x150 [md_cluster]
md_cluster_stop+0x18/0x30 [md_mod]
bitmap_free+0x12e/0x140 [md_mod]
bitmap_destroy+0x7f/0x90 [md_mod]
__md_stop+0x21/0xa0 [md_mod]
do_md_stop+0x15f/0x5c0 [md_mod]
md_ioctl+0xa65/0x18a0 [md_mod]
blkdev_ioctl+0x49e/0x8d0
block_ioctl+0x41/0x50
do_vfs_ioctl+0x96/0x5b0
SyS_ioctl+0x79/0x90
entry_SYSCALL_64_fastpath+0x1e/0xad
This maybe not resolve the issue completely since the
KTHREAD_SHOULD_STOP flag could be set between "break"
and "schedule", but at least the chance for the symptom
happen could be reduce a lot (The indefinite test runs
more than 20 hours without problem and it happens easily
without the change).
Signed-off-by: Guoqing Jiang <gqjiang@suse.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The writequeue and writequeue_lock member of othercon was not initialized.
If lowcomms_state_change() is called from network layer, othercon->swork
may be scheduled. In this case, send_to_sock() will generate a NULL pointer
reference. We avoid this problem by correctly initializing writequeue and
writequeue_lock member of othercon.
Signed-off-by: Tadashi Miyauchi <miyauchi@toshiba-tops.co.jp>
Signed-off-by: Tsutomu Owa <tsutomu.owa@toshiba.co.jp>
Signed-off-by: David Teigland <teigland@redhat.com>
When an error occurs in kernel_recvmsg or kernel_sendpage and
close_connection is called and receive work is already scheduled,
receive work is canceled. In that case, the receive work will not
be scheduled forever after reconnection, because CF_READ_PENDING
flag is established.
Signed-off-by: Tadashi Miyauchi <miyauchi@toshiba-tops.co.jp>
Signed-off-by: Tsutomu Owa <tsutomu.owa@toshiba.co.jp>
Signed-off-by: David Teigland <teigland@redhat.com>
In the current implementation, we think that exclusion control between
processing to set the callback function to the connection structure and
processing to refer to the connection structure from the callback function
was not enough. We fix them.
Signed-off-by: Tadashi Miyauchi <miyauchi@toshiba-tops.co.jp>
Signed-off-by: Tsutomu Owa <tsutomu.owa@toshiba.co.jp>
Signed-off-by: David Teigland <teigland@redhat.com>
dlm_cb_seq is 64 bits. If dlm_cb_seq overflows and returns to 0,
dlm_rem_lkb_callback() will not work properly.
Signed-off-by: Tadashi Miyauchi <miyauchi@toshiba-tops.co.jp>
Signed-off-by: Tsutomu Owa <tsutomu.owa@toshiba.co.jp>
Signed-off-by: David Teigland <teigland@redhat.com>
The sk member of the socket generated by sock_create_kern() is overwritten
by ops->accept(). So the previous sk will not be released.
We use kernel_accept() instead of sock_create_kern() and ops->accept().
Signed-off-by: Tadashi Miyauchi <miyauchi@toshiba-tops.co.jp>
Signed-off-by: Tsutomu Owa <tsutomu.owa@toshiba.co.jp>
Signed-off-by: David Teigland <teigland@redhat.com>
When the DLM_LKF_NODLCKWT flag was set, even if conversion deadlock
was detected, the caller of can_be_granted() was unknown.
We change the behavior of can_be_granted() and change it to detect
conversion deadlock regardless of whether the DLM_LKF_NODLCKWT flag
is set or not. And depending on whether the DLM_LKF_NODLCKWT flag
is set or not, we change the behavior at the caller of can_be_granted().
This fix has no effect except when using DLM_LKF_NODLCKWT flag.
Currently, ocfs2 uses the DLM_LKF_NODLCKWT flag and does not expect a
cancel operation from conversion deadlock when calling dlm_lock().
ocfs2 is implemented to perform a cancel operation by requesting
BASTs (callback).
Signed-off-by: Tadashi Miyauchi <miyauchi@toshiba-tops.co.jp>
Signed-off-by: Tsutomu Owa <tsutomu.owa@toshiba.co.jp>
Signed-off-by: David Teigland <teigland@redhat.com>
If reconnection fails while executing dlm_lowcomms_stop,
dlm_send will not stop.
Signed-off-by: Tadashi Miyauchi <miyauchi@toshiba-tops.co.jp>
Signed-off-by: Tsutomu Owa <tsutomu.owa@toshiba.co.jp>
Signed-off-by: David Teigland <teigland@redhat.com>
CF_WRITE_PENDING flag has been reanimated to make dlm_send stop properly
when running dlm_lowcomms_stop.
Signed-off-by: Tadashi Miyauchi <miyauchi@toshiba-tops.co.jp>
Signed-off-by: Tsutomu Owa <tsutomu.owa@toshiba.co.jp>
Signed-off-by: David Teigland <teigland@redhat.com>
When dlm_recoverd_stop() is called between kthread_should_stop() and
set_task_state(TASK_INTERRUPTIBLE), dlm_recoverd will not wake up.
Signed-off-by: Tadashi Miyauchi <miyauchi@toshiba-tops.co.jp>
Signed-off-by: Tsutomu Owa <tsutomu.owa@toshiba.co.jp>
Signed-off-by: David Teigland <teigland@redhat.com>
If an error occurs in the sending / receiving process, if othercon
exists, sending / receiving processing using othercon may also result
in an error. We fix to pre-close othercon as well.
Signed-off-by: Tadashi Miyauchi <miyauchi@toshiba-tops.co.jp>
Signed-off-by: Tsutomu Owa <tsutomu.owa@toshiba.co.jp>
Signed-off-by: David Teigland <teigland@redhat.com>
If a node sends a DLM_RCOM_STATUS command and an error occurs on the
receiving side, the DLM_RCOM_STATUS_REPLY response may not be returned.
We retransmitted the DLM_RCOM_STATUS command so that we do not wait for
an infinite response.
Signed-off-by: Tadashi Miyauchi <miyauchi@toshiba-tops.co.jp>
Signed-off-by: Tsutomu Owa <tsutomu.owa@toshiba.co.jp>
Signed-off-by: David Teigland <teigland@redhat.com>
In the current implementation, we think that exclusion control
for othercon in tcp_accept_from_sock() and sctp_accept_from_sock()
was not enough. We fix them.
Signed-off-by: Tadashi Miyauchi <miyauchi@toshiba-tops.co.jp>
Signed-off-by: Tsutomu Owa <tsutomu.owa@toshiba.co.jp>
Signed-off-by: David Teigland <teigland@redhat.com>
When kernel_sendpage(in send_to_sock) and kernel_recvmsg
(in receive_from_sock) return error, close_connection may works at the
same time. At that time, they may wait for each other by cancel_work_sync.
Signed-off-by: Tadashi Miyauchi <miayuchi@toshiba-tops.co.jp>
Signed-off-by: Tsutomu Owa <tsutomu.owa@toshiba.co.jp>
Signed-off-by: David Teigland <teigland@redhat.com>
save_cb argument is not used. We remove them.
Signed-off-by: Tadashi Miyauchi <miyauchi@toshiba-tops.co.jp>
Signed-off-by: Tsutomu Owa <tsutomu.owa@toshiba.co.jp>
Signed-off-by: David Teigland <teigland@redhat.com>
In a previous patch I noted that accept() often copies the struct
sock (sk) which overwrites the sock callbacks. However, in testing
we discovered that the dlm connection structures (con) are sometimes
deleted and recreated as connections come and go, and since they're
zeroed out by kmem_cache_zalloc, the saved callback pointers are
also initialized to zero. But with today's DLM code, the callbacks
are only saved when a socket is added.
During recovery testing, we discovered a common situation in which
the new con is initialized to zero, then a socket is added after
accept(). In this case, the sock's saved values are all NULL, but
the saved values are wiped out, due to accept(). Therefore, we
don't have a known good copy of the callbacks from which we can
restore.
Since the struct sock callbacks are always good after listen(),
this patch saves the known good values after listen(). These good
values are then used for subsequent restores.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Tadashi Miyauchi <miyauchi@toshiba-tops.co.jp>
Signed-off-by: David Teigland <teigland@redhat.com>
Before this patch, there was a flag in the con structure that was
used to determine whether or not a connect was needed. The bit was
set here and there, and cleared here and there, so it left some
race conditions: the bit was set, work was queued, then the worker
cleared the bit, allowing someone else to set it while the worker
ran. For the most part, this worked okay, but we got into trouble
if connections were lost and it needed to reconnect.
This patch eliminates the flag in favor of simply checking if we
actually have a sock pointer while protected by the mutex.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Reviewed-by: Tadashi Miyauchi <miyauchi@toshiba-tops.co.jp>
Signed-off-by: David Teigland <teigland@redhat.com>
-----BEGIN PGP SIGNATURE-----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=VPMU
-----END PGP SIGNATURE-----
Merge tag 'locks-v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux
Pull file locking updates from Jeff Layton:
"This pile just has a few file locking fixes from Ben Coddington. There
are a couple of cleanup patches + an attempt to bring sanity to the
l_pid value that is reported back to userland on an F_GETLK request.
After a few gyrations, he came up with a way for filesystems to
communicate to the VFS layer code whether the pid should be translated
according to the namespace or presented as-is to userland"
* tag 'locks-v4.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux:
locks: restore a warn for leaked locks on close
fs/locks: Remove fl_nspid and use fs-specific l_pid for remote locks
fs/locks: Use allocation rather than the stack in fcntl_getlk()
Declare kset_uevent_ops structure as const as it is only passed as an
argument to the function kset_create_and_add. This argument is of type
const, so declare the structure as const.
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Print a message when a cluster name is not specified by
the caller. In this case the cluster name configured
for the dlm is used without any validation that it is
the cluster expected by the application.
Signed-off-by: Zhu Lingshan <lszhu@suse.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The local variable "rv" is reassigned by a statement at the beginning.
Thus omit the explicit initialisation.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: David Teigland <teigland@redhat.com>
Replace the specification of two data structures by pointer dereferences
as the parameter for the operator "sizeof" to make the corresponding size
determination a bit safer according to the Linux coding style convention.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: David Teigland <teigland@redhat.com>
* Multiplications for the size determination of memory allocations
indicated that array data structures should be processed.
Thus reuse the corresponding function "kcalloc".
This issue was detected by using the Coccinelle software.
* Replace the specification of data structures by pointer dereferences
to make the corresponding size determinations a bit safer according to
the Linux coding style convention.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: David Teigland <teigland@redhat.com>
* A multiplication for the size determination of a memory allocation
indicated that an array data structure should be processed.
Thus use the corresponding function "kmalloc_array".
This issue was detected by using the Coccinelle software.
* Replace the specification of a data type by a pointer dereference
to make the corresponding size determination a bit safer according to
the Linux coding style convention.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: David Teigland <teigland@redhat.com>
Replace the specification of a data structure by a pointer dereference
as the parameter for the operator "sizeof" to make the corresponding size
determination a bit safer according to the Linux coding style convention.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: David Teigland <teigland@redhat.com>
A multiplication for the size determination of a memory allocation
indicated that an array data structure should be processed.
Thus use the corresponding function "kcalloc".
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: David Teigland <teigland@redhat.com>
Replace the specification of a data structure by a pointer dereference
as the parameter for the operator "sizeof" to make the corresponding size
determination a bit safer according to the Linux coding style convention.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: David Teigland <teigland@redhat.com>
The script "checkpatch.pl" pointed information out like the following.
CHECK: spaces preferred around that '+' (ctx:VxV)
Thus fix the affected source code places.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: David Teigland <teigland@redhat.com>
Six single characters (line breaks) should be put into a sequence.
Thus use the corresponding function "seq_putc".
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: David Teigland <teigland@redhat.com>
This change will try to make this error message more clear,
since the upper applications (e.g. ocfs2) invoke dlm_new_lockspace
to create a new lockspace with passing a cluster name. Sometimes,
dlm_new_lockspace return failure while two cluster names dismatch,
the user is a little confused since this line error message is not
enough obvious.
Signed-off-by: Gang He <ghe@suse.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Clear the 'unused' field and the uninitialized padding in 'lksb' to
avoid leaking memory to userland in copy_result_to_user().
Signed-off-by: Vlad Tsyrklevich <vlad@tsyrklevich.net>
Signed-off-by: David Teigland <teigland@redhat.com>
Kees Cook
Gang He
Denys Vlasenko
Linus Torvalds
Al Viro
Greg Kroah-Hartman
Bhumika Goyal
David Teigland
Guoqing Jiang
tsutomu.owa@toshiba.co.jp
Bob Peterson
Edwin Török
Zhu Lingshan
Markus Elfring
Vlad Tsyrklevich