The primary and async CRQs are nearly identical outside of the format and
length of each message entry in the dma mapped page that represents the
queue data. These queues can be represented with a generic queue structure
that uses a union to differentiate between message format of the mapped
page.
This structure will further be leveraged in a followup patcheset that
introduces Sub-CRQs.
Link: https://lore.kernel.org/r/20210106201835.1053593-2-tyreld@linux.ibm.com
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 2aa0102c66 ("scsi: ibmvfc: Use correlation token to tag commands")
sets the vfcFrame correlation token to the pointer handle of the associated
ibmvfc_event. However, that commit failed to cast the pointer to an
appropriate type which in this case is a u64. As such sparse warnings are
generated for both correlation token assignments.
ibmvfc.c:2375:36: sparse: incorrect type in argument 1 (different base types)
ibmvfc.c:2375:36: sparse: expected unsigned long long [usertype] val
ibmvfc.c:2375:36: sparse: got struct ibmvfc_event *[assigned] evt
Add the appropriate u64 casts when assigning an ibmvfc_event as a
correlation token.
Link: https://lore.kernel.org/r/20210106203721.1054693-1-tyreld@linux.ibm.com
Fixes: 2aa0102c66 ("scsi: ibmvfc: Use correlation token to tag commands")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Tyrel Datwyler <tyreld@linux.ibm.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Building ufshcd-pltfrm.c on arch/s390/ has a linker error since S390 does
not support IOMEM, so add a dependency on HAS_IOMEM.
s390-linux-ld: drivers/scsi/ufs/ufshcd-pltfrm.o: in function `ufshcd_pltfrm_init':
ufshcd-pltfrm.c:(.text+0x38e): undefined reference to `devm_platform_ioremap_resource'
where that devm_ function is inside an #ifdef CONFIG_HAS_IOMEM/#endif
block.
Link: lore.kernel.org/r/202101031125.ZEFCUiKi-lkp@intel.com
Link: https://lore.kernel.org/r/20210106040822.933-1-rdunlap@infradead.org
Fixes: 03b1781aa9 ("[SCSI] ufs: Add Platform glue driver for ufshcd")
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Alim Akhtar <alim.akhtar@samsung.com>
Cc: Avri Altman <avri.altman@wdc.com>
Cc: linux-scsi@vger.kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Transaction Specific Fields (TSF) in the UPIU package could be CDB
(SCSI/UFS Command Descriptor Block), OSF (Opcode Specific Field), and TM
I/O parameter (Task Management Input/Output Parameter). But, currently, we
take all of these as CDB in the UPIU trace. Thus makes user confuse among
CDB, OSF, and TM message. So fix it with this patch.
Link: https://lore.kernel.org/r/20210105113446.16027-7-huobean@gmail.com
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Distinguish between TM request UPIU and response UPIU in TM UPIU trace, for
the TM response, let TM UPIU trace print its TM response UPIU.
Link: https://lore.kernel.org/r/20210105113446.16027-6-huobean@gmail.com
Acked-by: Avri Altman <avri.altman@wdc.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently, in the query completion trace print, since we use
hba->lrb[tag].ucd_req_ptr and didn't differentiate UPIU between request and
response, thus header and transaction-specific field in UPIU printed by
query trace are identical. This is not very practical. As below:
query_send: HDR:16 00 00 0e 00 81 00 00 00 00 00 00, CDB:06 0e 03 00 00 00 00 00 00 00 00 00 00 00 00 00
query_complete: HDR:16 00 00 0e 00 81 00 00 00 00 00 00, CDB:06 0e 03 00 00 00 00 00 00 00 00 00 00 00 00 00
For the failure analysis, we want to understand the real response reported
by the UFS device, however, the current query trace tells us nothing. After
this patch, the query trace on the query_send, and the above a pair of
query_send and query_complete will be:
query_send: HDR:16 00 00 0e 00 81 00 00 00 00 00 00, CDB:06 0e 03 00 00 00 00 00 00 00 00 00 00 00 00 00
ufshcd_upiu: HDR:36 00 00 0e 00 81 00 00 00 00 00 00, CDB:06 0e 03 00 00 00 00 00 00 00 00 01 00 00 00 00
Link: https://lore.kernel.org/r/20210105113446.16027-5-huobean@gmail.com
Acked-by: Avri Altman <avri.altman@wdc.com>
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Don't call trace_ufshcd_upiu() in case ufshba_upiu trace poit is not
enabled.
Link: https://lore.kernel.org/r/20210105113446.16027-4-huobean@gmail.com
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
__print_symbolic() is designed for exporting the print formatting table to
userspace and allows parsing tool, such as trace-cmd and perf, to analyze
trace log according to this print formatting table, meanwhile, by using
__print_symbolic()s, save space in the trace ring buffer.
original print format:
print fmt: "%s: %s: HDR:%s, CDB:%s", __get_str(str), __get_str(dev_name),
__print_hex(REC->hdr, sizeof(REC->hdr)),
__print_hex(REC->tsf, sizeof(REC->tsf))
after this change:
print fmt: "%s: %s: HDR:%s, CDB:%s",
print_symbolic(REC->str_t, {0, "send"},
{1, "complete"},
{2, "dev_complete"},
{3, "query_send"},
{4, "query_complete"},
{5, "query_complete_err"},
{6, "tm_send"},
{7, "tm_complete"},
{8, "tm_complete_err"}),
__get_str(dev_name), __print_hex(REC->hdr, sizeof(REC->hdr)),
__print_hex(REC->tsf, sizeof(REC->tsf))
Note: This patch just converts current __get_str(str) to __print_symbolic(),
the original tracing log will not be affected by this change, so it
doesn't break what current parsers expect.
Link: https://lore.kernel.org/r/20210105113446.16027-3-huobean@gmail.com
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Current EM macro definition, we use stringize operator '#', which turns the
argument it precedes into a quoted string. Thus requires the symbol of
__print_symbolic() should be the string corresponding to the name of the
enum.
However, we have other cases, the symbol and enum name are not the same, we
can redefine EM/EMe, but there will introduce some redundant codes. This
patch is to remove this restriction, let others reuse the current EM/EMe
definition.
Link: https://lore.kernel.org/r/20210105113446.16027-2-huobean@gmail.com
Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Phil Oester reported that a fix for a possible buffer overrun that I sent
caused a regression that manifests in this output:
Event Message: A PCI parity error was detected on a component at bus 0 device 5 function 0.
Severity: Critical
Message ID: PCI1308
The original code tried to handle the sense data pointer differently when
using 32-bit 64-bit DMA addressing, which would lead to a 32-bit dma_addr_t
value of 0x11223344 to get stored
32-bit kernel: 44 33 22 11 ?? ?? ?? ??
64-bit LE kernel: 44 33 22 11 00 00 00 00
64-bit BE kernel: 00 00 00 00 44 33 22 11
or a 64-bit dma_addr_t value of 0x1122334455667788 to get stored as
32-bit kernel: 88 77 66 55 ?? ?? ?? ??
64-bit kernel: 88 77 66 55 44 33 22 11
In my patch, I tried to ensure that the same value is used on both 32-bit
and 64-bit kernels, and picked what seemed to be the most sensible
combination, storing 32-bit addresses in the first four bytes (as 32-bit
kernels already did), and 64-bit addresses in eight consecutive bytes (as
64-bit kernels already did), but evidently this was incorrect.
Always storing the dma_addr_t pointer as 64-bit little-endian,
i.e. initializing the second four bytes to zero in case of 32-bit
addressing, apparently solved the problem for Phil, and is consistent with
what all 64-bit little-endian machines did before.
I also checked in the history that in previous versions of the code, the
pointer was always in the first four bytes without padding, and that
previous attempts to fix 64-bit user space, big-endian architectures and
64-bit DMA were clearly flawed and seem to have introduced made this worse.
Link: https://lore.kernel.org/r/20210104234137.438275-1-arnd@kernel.org
Fixes: 381d34e376 ("scsi: megaraid_sas: Check user-provided offsets")
Fixes: 107a60dd71 ("scsi: megaraid_sas: Add support for 64bit consistent DMA")
Fixes: 94cd65ddf4 ("[SCSI] megaraid_sas: addded support for big endian architecture")
Fixes: 7b2519afa1 ("[SCSI] megaraid_sas: fix 64 bit sense pointer truncation")
Reported-by: Phil Oester <kernel@linuxace.com>
Tested-by: Phil Oester <kernel@linuxace.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Commit 996e509bbc ("sd: use __register_blkdev to avoid a modprobe for an
unregistered dev_t") removed blk_register_region(devt, ...) in sd_remove()
and since then, devt is unused in sd_remove().
Hence, make W=1 warns:
drivers/scsi/sd.c:3516:8:
warning: variable 'devt' set but not used [-Wunused-but-set-variable]
Simply remove this obsolete variable.
[mkp: fixed commit sha]
Link: https://lore.kernel.org/r/20201214095424.12479-1-lukas.bulwahn@gmail.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The block layer code will split a large zeroout request into multiple bios
and if WRITE SAME is disabled because the storage device reports that it
does not support it (or support the length used), we can get an error
message from the block layer despite the setting of RQF_QUIET on the first
request. This is because more than one request may have already been
submitted.
Fix this by setting RQF_QUIET when BLK_STS_TARGET is returned to fail the
request early, we don't need to log a message because we did not actually
submit the command to the device, and the block layer code will handle the
error by submitting individual write bios.
Link: https://lore.kernel.org/r/20201207221021.28243-1-emilne@redhat.com
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ewan D. Milne <emilne@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When sdeb_zbc_model does not match BLK_ZONED_NONE, BLK_ZONED_HA or
BLK_ZONED_HM, we should free sdebug_q_arr to prevent memleak. Also there is
no need to execute sdebug_erase_store() on failure of sdeb_zbc_model_str().
Link: https://lore.kernel.org/r/20201226061503.20050-1-dinghao.liu@zju.edu.cn
Acked-by: Douglas Gilbert <dgilbert@interlog.com>
Signed-off-by: Dinghao Liu <dinghao.liu@zju.edu.cn>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The CHAP secret displayed garbage characters causing iSCSI login
authentication failure. Correct the CHAP password max length.
Link: https://lore.kernel.org/r/20201217105144.8055-1-njavali@marvell.com
Reviewed-by: Lee Duncan <lduncan@suse.com>
Signed-off-by: Nilesh Javali <njavali@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Users can initiate resets to specific SCSI device/target/host through
IOCTL. When this happens, the SCSI cmd passed to eh_device/target/host
_reset_handler() callbacks is initialized with a request whose tag is -1.
In this case it is not right for eh_device_reset_handler() callback to
count on the LUN get from hba->lrb[-1]. Fix it by getting LUN from the SCSI
device associated with the SCSI cmd.
Link: https://lore.kernel.org/r/1609157080-26283-1-git-send-email-cang@codeaurora.org
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The UniPro specification states that attribute IDs of the following
parameters are vendor-specific so some SoCs could have no regions at the
defined addresses:
- DME_LocalFC0ProtectionTimeOutVal
- DME_LocalTC0ReplayTimeOutVal
- DME_LocalAFC0ReqTimeOutVal
In addition, the following parameters should be set considering the
compatibility between host and device.
- PA_PWRMODEUSERDATA0
- PA_PWRMODEUSERDATA1
- PA_PWRMODEUSERDATA2
- PA_PWRMODEUSERDATA3
- PA_PWRMODEUSERDATA4
- PA_PWRMODEUSERDATA5
Introduce a quirk to allow vendor drivers to override the UniPro defaults.
Link: https://lore.kernel.org/r/1fedd3dea0ccc980913a5995a10510d86a5b01b9.1608513782.git.kwmad.kim@samsung.com
Acked-by: Avri Altman <Avri.Altman@wdc.com>
Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The current flush location does not guarantee disabling BKOPS for the case
of requesting device power off.
1) The exceptional event handler is queued
2) ufs suspend starts with a request of device power off
3) BKOPS is disabled in ufs suspend
4) The queued work for the handler is done and BKOPS is re-enabled
Relocate the flush statement to ensure BKOPS remain disabled.
Link: https://lore.kernel.org/r/1608360039-16390-1-git-send-email-kwmad.kim@samsung.com
Reviewed-by: Can Guo <cang@codeaurora.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Kiwoong Kim <kwmad.kim@samsung.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Flush during hibern8 is sufficient on MediaTek platforms, thus enable
UFSHCI_QUIRK_SKIP_MANUAL_WB_FLUSH_CTRL to skip enabling
fWriteBoosterBufferFlush during WriteBooster initialization.
Link: https://lore.kernel.org/r/20201222072928.32328-1-stanley.chu@mediatek.com
Reviewed-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
UFSHCI_QUIRK_SKIP_MANUAL_WB_FLUSH_CTRL is intended to skip enabling
fWriteBoosterBufferFlushEn while WriteBooster is initializing. Therefore
it is better to apply the checking during WriteBooster initialization only.
Link: https://lore.kernel.org/r/20201222072905.32221-3-stanley.chu@mediatek.com
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Currently if device needs to do flush or BKOP operations, the device VCC
power is kept during runtime-suspend period.
However, if system suspend is happening while device is runtime-suspended,
such power may not be disabled successfully.
The reasons may be,
1. If current PM level is the same as SPM level, device will keep
runtime-suspended by ufshcd_system_suspend().
2. Flush recheck work may not be scheduled successfully during system
suspend period. If it can wake up the system, this is also not the
intention of the recheck work.
To fix this issue, simply runtime-resume the device if the flush is allowed
during runtime suspend period. Flush capability will be disabled while
leaving runtime suspend, and also not be allowed in system suspend period.
Link: https://lore.kernel.org/r/20201222072905.32221-2-stanley.chu@mediatek.com
Fixes: 51dd905bd2 ("scsi: ufs: Fix WriteBooster flush during runtime suspend")
Reviewed-by: Chaotian Jing <chaotian.jing@mediatek.com>
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Merge two commits that had dependencies on other 5.11 trees (the block
and the irq trees respectively).
- We reverted a megaraid_sas change in 5.10 due to missing block
layer plumbing. Now that this is in place, reinstate the change.
- The hisi_sas driver had a dependency on a driver core irq change
that went in through Thomas' tree.
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
- Fix recently introduced crash in the intel_pstate driver that
occurs if scale-invariance is disabled during resume from
suspend-to-RAM due to inconsistent changes of APERF or MPERF
MSR values made by the platform firmware (Rafael Wysocki).
- Fix a memory leak and add a missing clk_put() in error paths in
the OPP framework (Quanyang Wang, Viresh Kumar).
- Add new C-states table for SnowRidge processors to the intel_idle
driver (Artem Bityutskiy).
- Update the MAINTAINERS entry for cpuidle to make it clear that
the governors are covered by it too (Lukas Bulwahn).
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAl/wOgQSHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxe7wQAIP06E92PVDN1tDf88FN2BpBIziQvHPF
T99v8RWQZCaMOQz5b1nXTqbQrKWFgqHiQK+6VjQcMW6xTWt7EM0eNdzGQtEsv9vd
Ux4UIQp6CZnhorXLC9ZmTo+7tFze2L/KV4qVUQkkrcOXQ1qIqJiZdktYULRXgl37
pJwUroPacKT9WiYwzyXZ2dkt337DQBb1AyumHZ/5gOik6Xo+uVK0kuDzECjRHQ+5
R2aZftqAm/u6/JaeEgKQG+0LOAt1wJ6y9xcsFq303K/xDMKyRw4P3ngcVRfbyUSI
2t3GfL9h2+41wtUpLKeJiADIJEov5P9ngwMedHNOpIX+aLL4cBbXG/LFc86QakD4
qVcN+NOl13kNfn6eSSVz8mmf36juoEcYu1RhenPZfClwesqOZk0YcIoovT7k5A8B
BnfEkQrjN6jFTfgc+A7rDXbLvRjhkIw2qr9Do+77AdYu0LkvgWlV3It3No10SzKw
NshvNIedX3KF6xBISoFJhsGUrC8Xfpc5DIsfqYyQBIIKMEtSA00gK2XOHIpmhnUY
0jXwL3DNIf2xC4BXHUgxJa6QpUyjKeLdqqwpnUryChHo+b8z78oE/gMza7iAV56t
G7pQcdsX2ogLeNKtOvDbhYDa1janQpkiJoD/fy+QD7V5RO+YaxOVM5gFUrQegJKY
1Qm6LXaswei8
=51jM
-----END PGP SIGNATURE-----
Merge tag 'pm-5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a crash in intel_pstate during resume from suspend-to-RAM
that may occur after recent changes and two resource leaks in error
paths in the operating performance points (OPP) framework, add a new
C-states table to intel_idle and update the cpuidle MAINTAINERS entry
to cover the governors too.
Specifics:
- Fix recently introduced crash in the intel_pstate driver that
occurs if scale-invariance is disabled during resume from
suspend-to-RAM due to inconsistent changes of APERF or MPERF MSR
values made by the platform firmware (Rafael Wysocki).
- Fix a memory leak and add a missing clk_put() in error paths in the
OPP framework (Quanyang Wang, Viresh Kumar).
- Add new C-states table for SnowRidge processors to the intel_idle
driver (Artem Bityutskiy).
- Update the MAINTAINERS entry for cpuidle to make it clear that the
governors are covered by it too (Lukas Bulwahn)"
* tag 'pm-5.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
intel_idle: add SnowRidge C-state table
cpufreq: intel_pstate: Fix fast-switch fallback path
opp: Call the missing clk_put() on error
opp: fix memory leak in _allocate_opp_table
MAINTAINERS: include governors into CPU IDLE TIME MANAGEMENT FRAMEWORK
This is a load of driver fixes (12 ufs, 1 mpt3sas, 1 cxgbi). The big
core two fixes are for power management ("block: Do not accept any
requests while suspended" and "block: Fix a race in the runtime power
management code") which finally sorts out the resume problems we've
occasionally been having. To make the resume fix, there are seven
necessary precursors which effectively renames REQ_PREEMPT to REQ_PM,
so every "special" request in block is automatically a power
management exempt one. All of the non-PM preempt cases are removed
except for the one in the SCSI Parallel Interface (spi) domain
validation which is a genuine case where we have to run requests at
high priority to validate the bus so this becomes an autopm get/put
protected request.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCX+98LyYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishYvLAP9K+HBT
Lrkt3VWc9gq6F36+QH/SeW8IyXGaj77ysFHXxwD/UambRjRK8IA24mvf9sWeLLj6
p8CqCHUkCXqP48IiymE=
=NHrx
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a load of driver fixes (12 ufs, 1 mpt3sas, 1 cxgbi).
The big core two fixes are for power management ("block: Do not accept
any requests while suspended" and "block: Fix a race in the runtime
power management code") which finally sorts out the resume problems
we've occasionally been having.
To make the resume fix, there are seven necessary precursors which
effectively renames REQ_PREEMPT to REQ_PM, so every "special" request
in block is automatically a power management exempt one.
All of the non-PM preempt cases are removed except for the one in the
SCSI Parallel Interface (spi) domain validation which is a genuine
case where we have to run requests at high priority to validate the
bus so this becomes an autopm get/put protected request"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (22 commits)
scsi: cxgb4i: Fix TLS dependency
scsi: ufs: Un-inline ufshcd_vops_device_reset function
scsi: ufs: Re-enable WriteBooster after device reset
scsi: ufs-mediatek: Use correct path to fix compile error
scsi: mpt3sas: Signedness bug in _base_get_diag_triggers()
scsi: block: Do not accept any requests while suspended
scsi: block: Remove RQF_PREEMPT and BLK_MQ_REQ_PREEMPT
scsi: core: Only process PM requests if rpm_status != RPM_ACTIVE
scsi: scsi_transport_spi: Set RQF_PM for domain validation commands
scsi: ide: Mark power management requests with RQF_PM instead of RQF_PREEMPT
scsi: ide: Do not set the RQF_PREEMPT flag for sense requests
scsi: block: Introduce BLK_MQ_REQ_PM
scsi: block: Fix a race in the runtime power management code
scsi: ufs-pci: Enable UFSHCD_CAP_RPM_AUTOSUSPEND for Intel controllers
scsi: ufs-pci: Fix recovery from hibernate exit errors for Intel controllers
scsi: ufs-pci: Ensure UFS device is in PowerDown mode for suspend-to-disk ->poweroff()
scsi: ufs-pci: Fix restore from S4 for Intel controllers
scsi: ufs-mediatek: Keep VCC always-on for specific devices
scsi: ufs: Allow regulators being always-on
scsi: ufs: Clear UAC for RPMB after ufshcd resets
...
-----BEGIN PGP SIGNATURE-----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=OvP3
-----END PGP SIGNATURE-----
Merge tag 'block-5.11-2021-01-01' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Two minor block fixes from this last week that should go into 5.11:
- Add missing NOWAIT debugfs definition (Andres)
- Fix kerneldoc warning introduced this merge window (Randy)"
* tag 'block-5.11-2021-01-01' of git://git.kernel.dk/linux-block:
block: add debugfs stanza for QUEUE_FLAG_NOWAIT
fs: block_dev.c: fix kernel-doc warnings from struct block_device changes
-----BEGIN PGP SIGNATURE-----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=XYT5
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.11-2021-01-01' of git://git.kernel.dk/linux-block
Pull io_uring fixes from Jens Axboe:
"A few fixes that should go into 5.11, all marked for stable as well:
- Fix issue around identity COW'ing and users that share a ring
across processes
- Fix a hang associated with unregistering fixed files (Pavel)
- Move the 'process is exiting' cancelation a bit earlier, so
task_works aren't affected by it (Pavel)"
* tag 'io_uring-5.11-2021-01-01' of git://git.kernel.dk/linux-block:
kernel/io_uring: cancel io_uring before task works
io_uring: fix io_sqe_files_unregister() hangs
io_uring: add a helper for setting a ref node
io_uring: don't assume mm is constant across submits
Commit 436e980e2e ("kbuild: don't hardcode depmod path") stopped
hard-coding the path of depmod, but in the process caused trouble for
distributions that had that /sbin location, but didn't have it in the
PATH (generally because /sbin is limited to the super-user path).
Work around it for now by just adding /sbin to the end of PATH in the
depmod.sh script.
Reported-and-tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
For cancelling io_uring requests it needs either to be able to run
currently enqueued task_works or having it shut down by that moment.
Otherwise io_uring_cancel_files() may be waiting for requests that won't
ever complete.
Go with the first way and do cancellations before setting PF_EXITING and
so before putting the task_work infrastructure into a transition state
where task_work_run() would better not be called.
Cc: stable@vger.kernel.org # 5.5+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
io_sqe_files_unregister() uninterruptibly waits for enqueued ref nodes,
however requests keeping them may never complete, e.g. because of some
userspace dependency. Make sure it's interruptible otherwise it would
hang forever.
Cc: stable@vger.kernel.org # 5.6+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Setting a new reference node to a file data is not trivial, don't repeat
it, add and use a helper.
Cc: stable@vger.kernel.org # 5.6+
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
trivial fixups for the new msgr2 support.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAl/stgUTHGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi7SECACa5sWn5GKArGNCYesG/Xnbl4FbtorA
QNmDS7z5SBTsxQfOmkIq7Xon9fRxXEpWzr/eCEZKcXc+REHXGsy8zFz/HA0t97SS
tSho288zfEifGK0k2aptBTXAiEnzhIweu9f5ZbxfLN+JPyfynxfvXytdXYFeU/Op
zLUBSjJusmm671APBvyWl/5h/2N7XkpBM3AWNJjaW26+Mft3SpsS8Ui+USWb9SJF
YEmsVR03W2pbSS66a774bThoLP8exfg7xMfUcWRHqYs3Awpp0mwMnKkHMfooYLGA
Cc5FsQ7Exin23B4vCm6+0prg/cgwBg516HfsFH/jTcE2D/PjSCEX7tXE
=ZGwT
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.11-rc2' of git://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"A fix for an edge case in MClientRequest encoding and a couple of
trivial fixups for the new msgr2 support"
* tag 'ceph-for-5.11-rc2' of git://github.com/ceph/ceph-client:
libceph: add __maybe_unused to DEFINE_MSGR2_FEATURE
libceph: align session_key and con_secret to 16 bytes
libceph: fix auth_signature buffer allocation in secure mode
ceph: reencode gid_list when reconnecting
Add C-state table for the SnowRidge SoC which is found on Intel Jacobsville
platforms.
The following has been changed.
1. C1E latency changed from 10us to 15us. It was measured using the
open source "wult" tool (the "nic" method, 15us is the 99.99th
percentile).
2. C1E power break even changed from 20us to 25us, which may result
in less C1E residency in some workloads.
3. C6 latency changed from 50us to 130us. Measured the same way as C1E.
The C6 C-state is supported only by some SnowRidge revisions, so add a C-state
table commentary about this.
On SnowRidge, C6 support is enumerated via the usual mechanism: "mwait" leaf of
the "cpuid" instruction. The 'intel_idle' driver does check this leaf, so even
though C6 is present in the table, the driver will only use it if the CPU does
support it.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When sugov_update_single_perf() falls back to the "frequency"
path due to the missing scale-invariance, it will call
cpufreq_driver_fast_switch() via sugov_fast_switch()
and the driver's ->fast_switch() callback will be invoked,
so it must not be NULL.
However, after commit a365ab6b9d ("cpufreq: intel_pstate: Implement
the ->adjust_perf() callback") intel_pstate sets ->fast_switch() to
NULL when it is going to use intel_cpufreq_adjust_perf(), which is a
mistake, because on x86 the scale-invariance may be turned off
dynamically, so modify it to retain the original ->adjust_perf()
callback pointer.
Fixes: a365ab6b9d ("cpufreq: intel_pstate: Implement the ->adjust_perf() callback")
Reported-by: Kenneth R. Crudup <kenny@panix.com>
Tested-by: Kenneth R. Crudup <kenny@panix.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pull operating performance points (OPP) framework fixes for 5.11-rc2
from Viresh Kumar:
"This contains two patches to fix freeing of resources in error paths."
* 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
opp: Call the missing clk_put() on error
opp: fix memory leak in _allocate_opp_table
This was missed in 021a24460d. Leads to the numeric value of
QUEUE_FLAG_NOWAIT (i.e. 29) showing up in
/sys/kernel/debug/block/*/state.
Fixes: 021a24460d
Cc: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Cc: Mike Snitzer <snitzer@redhat.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Fix new kernel-doc warnings in fs/block_dev.c:
../fs/block_dev.c:1066: warning: Excess function parameter 'whole' description in 'bd_abort_claiming'
../fs/block_dev.c:1837: warning: Function parameter or member 'dev' not described in 'lookup_bdev'
Fixes: 4e7b5671c6 ("block: remove i_bdev")
Fixes: 37c3fc9abb ("block: simplify the block device claiming interface")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: linux-fsdevel@vger.kernel.org
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge misc fixes from Andrew Morton:
"16 patches
Subsystems affected by this patch series: mm (selftests, hugetlb,
pagecache, mremap, kasan, and slub), kbuild, checkpatch, misc, and
lib"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm: slub: call account_slab_page() after slab page initialization
zlib: move EXPORT_SYMBOL() and MODULE_LICENSE() out of dfltcc_syms.c
lib/zlib: fix inflating zlib streams on s390
lib/genalloc: fix the overflow when size is too big
kdev_t: always inline major/minor helper functions
sizes.h: add SZ_8G/SZ_16G/SZ_32G macros
local64.h: make <asm/local64.h> mandatory
kasan: fix null pointer dereference in kasan_record_aux_stack
mm: generalise COW SMC TLB flushing race comment
mm/mremap.c: fix extent calculation
mm: memmap defer init doesn't work as expected
mm: add prototype for __add_to_page_cache_locked()
checkpatch: prefer strscpy to strlcpy
Revert "kbuild: avoid static_assert for genksyms"
mm/hugetlb: fix deadlock in hugetlb_cow error path
selftests/vm: fix building protection keys test
It's convenient to have page->objects initialized before calling into
account_slab_page(). In particular, this information can be used to
pre-alloc the obj_cgroup vector.
Let's call account_slab_page() a bit later, after the initialization of
page->objects.
This commit doesn't bring any functional change, but is required for
further optimizations.
[akpm@linux-foundation.org: undo changes needed by forthcoming mm-memcg-slab-pre-allocate-obj_cgroups-for-slab-caches-with-slab_account.patch]
Link: https://lkml.kernel.org/r/20201110195753.530157-1-guro@fb.com
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Cc: Michal Hocko <mhocko@kernel.org>
Cc: Christoph Lameter <cl@linux.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In commit 11fb479ff5 ("zlib: export S390 symbols for zlib modules"), I
added EXPORT_SYMBOL()s to dfltcc_inflate.c but then Mikhail said that
these should probably be in dfltcc_syms.c with the other
EXPORT_SYMBOL()s.
However, that is contrary to the current kernel style, which places
EXPORT_SYMBOL() immediately after the function that it applies to, so
move all EXPORT_SYMBOL()s to their respective function locations and
drop the dfltcc_syms.c file. Also move MODULE_LICENSE() from the
deleted file to dfltcc.c.
[rdunlap@infradead.org: remove dfltcc_syms.o from Makefile]
Link: https://lkml.kernel.org/r/20201227171837.15492-1-rdunlap@infradead.org
Link: https://lkml.kernel.org/r/20201219052530.28461-1-rdunlap@infradead.org
Fixes: 11fb479ff5 ("zlib: export S390 symbols for zlib modules")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Zaslonko Mikhail <zaslonko@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Decompressing zlib streams on s390 fails with "incorrect data check"
error.
Userspace zlib checks inflate_state.flags in order to byteswap checksums
only for zlib streams, and s390 hardware inflate code, which was ported
from there, tries to match this behavior. At the same time, kernel zlib
does not use inflate_state.flags, so it contains essentially random
values. For many use cases either zlib stream is zeroed out or checksum
is not used, so this problem is masked, but at least SquashFS is still
affected.
Fix by always passing a checksum to and from the hardware as is, which
matches zlib_inflate()'s expectations.
Link: https://lkml.kernel.org/r/20201215155551.894884-1-iii@linux.ibm.com
Fixes: 1261961000 ("lib/zlib: add s390 hardware support for kernel zlib_inflate")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Cc: Mikhail Zaslonko <zaslonko@linux.ibm.com>
Cc: <stable@vger.kernel.org> [5.6+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some graphic card has very big memory on chip, such as 32G bytes.
In the following case, it will cause overflow:
pool = gen_pool_create(PAGE_SHIFT, NUMA_NO_NODE);
ret = gen_pool_add(pool, 0x1000000, SZ_32G, NUMA_NO_NODE);
va = gen_pool_alloc(pool, SZ_4G);
The overflow occurs in gen_pool_alloc_algo_owner():
....
size = nbits << order;
....
The @nbits is "int" type, so it will overflow.
Then the gen_pool_avail() will return the wrong value.
This patch converts some "int" to "unsigned long", and
changes the compare code in while.
Link: https://lkml.kernel.org/r/20201229060657.3389-1-sjhuang@iluvatar.ai
Signed-off-by: Huang Shijie <sjhuang@iluvatar.ai>
Reported-by: Shi Jiasheng <jiasheng.shi@iluvatar.ai>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add these macros, since we can use them in drivers.
Link: https://lkml.kernel.org/r/20201229072819.11183-1-sjhuang@iluvatar.ai
Signed-off-by: Huang Shijie <sjhuang@iluvatar.ai>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Tyrel Datwyler
Randy Dunlap
Bean Huo
Arnd Bergmann
Adrian Hunter
Lukas Bulwahn
Ewan D. Milne
Dinghao Liu
Colin Ian King
Nilesh Javali
Can Guo
Kiwoong Kim
Stanley Chu
Martin K. Petersen
Linus Torvalds
Rafael J. Wysocki
Pavel Begunkov
Artem Bityutskiy
Heiko Carstens
Andres Freund
Roman Gushchin
Ilya Leoshkevich
Huang Shijie
Josh Poimboeuf