Implement support for the HVMOP_set_evtchn_upcall_vector hypercall in
order to set the per-vCPU event channel vector callback on Linux and
use it in preference of HVM_PARAM_CALLBACK_IRQ.
If the per-VCPU vector setup is successful on BSP, use this method
for the APs. If not, fallback to the global vector-type callback.
Also register callback_irq at per-vCPU event channel setup to trick
toolstack to think the domain is enlightened.
Suggested-by: "Roger Pau Monné" <roger.pau@citrix.com>
Signed-off-by: Jane Malalane <jane.malalane@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20220729070416.23306-1-jane.malalane@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Commit fa1f57421e ("xen/virtio: Enable restricted memory access using
Xen grant mappings") introduced a new requirement for using virtio
devices: the backend now needs to support the VIRTIO_F_ACCESS_PLATFORM
feature.
This is an undue requirement for non-PV guests, as those can be operated
with existing backends without any problem, as long as those backends
are running in dom0.
Per default allow virtio devices without grant support for non-PV
guests.
On Arm require VIRTIO_F_ACCESS_PLATFORM for devices having been listed
in the device tree to use grants.
Add a new config item to always force use of grants for virtio.
Fixes: fa1f57421e ("xen/virtio: Enable restricted memory access using Xen grant mappings")
Reported-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Tested-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com> # Arm64 guest using Xen
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/20220622063838.8854-4-jgross@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
solved and the nightmare is complete, here's the next one: speculating
after RET instructions and leaking privileged information using the now
pretty much classical covert channels.
It is called RETBleed and the mitigation effort and controlling
functionality has been modelled similar to what already existing
mitigations provide.
-----BEGIN PGP SIGNATURE-----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=09fW
-----END PGP SIGNATURE-----
Merge tag 'x86_bugs_retbleed' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 retbleed fixes from Borislav Petkov:
"Just when you thought that all the speculation bugs were addressed and
solved and the nightmare is complete, here's the next one: speculating
after RET instructions and leaking privileged information using the
now pretty much classical covert channels.
It is called RETBleed and the mitigation effort and controlling
functionality has been modelled similar to what already existing
mitigations provide"
* tag 'x86_bugs_retbleed' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (54 commits)
x86/speculation: Disable RRSBA behavior
x86/kexec: Disable RET on kexec
x86/bugs: Do not enable IBPB-on-entry when IBPB is not supported
x86/entry: Move PUSH_AND_CLEAR_REGS() back into error_entry
x86/bugs: Add Cannon lake to RETBleed affected CPU list
x86/retbleed: Add fine grained Kconfig knobs
x86/cpu/amd: Enumerate BTC_NO
x86/common: Stamp out the stepping madness
KVM: VMX: Prevent RSB underflow before vmenter
x86/speculation: Fill RSB on vmexit for IBRS
KVM: VMX: Fix IBRS handling after vmexit
KVM: VMX: Prevent guest RSB poisoning attacks with eIBRS
KVM: VMX: Convert launched argument to flags
KVM: VMX: Flatten __vmx_vcpu_run()
objtool: Re-add UNWIND_HINT_{SAVE_RESTORE}
x86/speculation: Remove x86_spec_ctrl_mask
x86/speculation: Use cached host SPEC_CTRL value for guest entry/exit
x86/speculation: Fix SPEC_CTRL write on SMT state change
x86/speculation: Fix firmware entry SPEC_CTRL handling
x86/speculation: Fix RSB filling with CONFIG_RETPOLINE=n
...
Instead of clearing the bss area in assembly code, use the clear_bss()
function.
This requires to pass the start_info address as parameter to
xen_start_kernel() in order to avoid the xen_start_info being zeroed
again.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20220630071441.28576-2-jgross@suse.com
Since entry asm is tricky, add a validation pass that ensures the
retbleed mitigation has been done before the first actual RET
instruction.
Entry points are those that either have UNWIND_HINT_ENTRY, which acts
as UNWIND_HINT_EMPTY but marks the instruction as an entry point, or
those that have UWIND_HINT_IRET_REGS at +0.
This is basically a variant of validate_branch() that is
intra-function and it will simply follow all branches from marked
entry points and ensures that all paths lead to ANNOTATE_UNRET_END.
If a path hits RET or an indirection the path is a fail and will be
reported.
There are 3 ANNOTATE_UNRET_END instances:
- UNTRAIN_RET itself
- exception from-kernel; this path doesn't need UNTRAIN_RET
- all early exceptions; these also don't need UNTRAIN_RET
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Native SYS{CALL,ENTER} entry points are called
entry_SYS{CALL,ENTER}_{64,compat}, make sure the Xen versions are
named consistently.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Update retpoline validation with the new CONFIG_RETPOLINE requirement of
not having bare naked RET instructions.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
In order to support virtio in Xen guests add a config option XEN_VIRTIO
enabling the user to specify whether in all Xen guests virtio should
be able to access memory via Xen grant mappings only on the host side.
Also set PLATFORM_VIRTIO_RESTRICTED_MEM_ACCESS feature from the guest
initialization code on Arm and x86 if CONFIG_XEN_VIRTIO is enabled.
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Oleksandr Tyshchenko <oleksandr_tyshchenko@epam.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/1654197833-25362-5-git-send-email-olekstysh@gmail.com
Signed-off-by: Juergen Gross <jgross@suse.com>
- Add Tegra234 cpufreq support (Sumit Gupta).
- Clean up and enhance the Mediatek cpufreq driver (Wan Jiabing,
Rex-BC Chen, and Jia-Wei Chang).
- Fix up the CPPC cpufreq driver after recent changes (Zheng Bin,
Pierre Gondois).
- Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine
Oudjana).
- Use list iterator only inside the list_for_each_entry loop (Xiaomeng
Tong, and Jakob Koschel).
- New APIs related to finding OPP based on interconnect bandwidth
(Krzysztof Kozlowski).
- Fix the missing of_node_put() in _bandwidth_supported() (Dan
Carpenter).
- Cleanups (Krzysztof Kozlowski, and Viresh Kumar).
- Add Out of Band mode description to the intel-speed-select utility
documentation (Srinivas Pandruvada).
- Add power sequences support to the system reboot and power off
code and make related platform-specific changes for multiple
platforms (Dmitry Osipenko, Geert Uytterhoeven).
-----BEGIN PGP SIGNATURE-----
iQJFBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmKU8lESHHJqd0Byand5
c29ja2kubmV0AAoJEILEb/54YlRxVz0P91LNCbkDSt60jzNkXdEjsvUnI/YjJ+QJ
/+ta7iCwf90obb6s9soBkTyU8Ia7hJ/IWDJW/5xhdG0ySYF17hGNIGKK9xKGsJFK
tzzWtjFsvT3PeUZQERekqWp8OYskHYmQMj8o4jqqFF7DZD/AswTgkVLALUd7YhVL
UvLmcKsUA7eXy3ZrhtrGSzVSEbKOGXBLFyjy3IuWjfz6Uk/nGQRNKGf7byRWLM44
y7zb75/5+p4MPyyJP8M/uiXzEYDKuubRtfx9PdmLgBUSMbtho6eB1x47dZWooaxe
YKmcFjF80AmnwxHb+Te2rZHPeIYr+5hLBaEq7xaLQf/nAS3y5z1PIfI2wVQ5mXPz
D599jHHda/6oSAKCVTq2fKfnlR6fetm5j66xOQINpD+G5b5tNSpllXJDamFZxFgP
DiQAOFzdnRYnK7yTiLWVl1q76SVRxqsGz7/5Ak+NRj2OQK2wRkLzHuZfiV/8r0pk
ksi6Ew9TerXkstoTQsSToPQxB2VvosSajNU3Oy27pmM0oal1XxP0LIPz9sMor5/g
tfk5f6Yz/+FFIfXj3cZffZNdhsJgejmcqPdrSdCOV3sBrblnIMQNpHiYg4jGztoj
IjYKYPVpSaWiSZLQOaK2moTEvm9CfQz1TQCF+/Kz88LX6/7ZaDJFxHG2FDEob0sg
6KVbrZWweLI=
=PAh+
-----END PGP SIGNATURE-----
Merge tag 'pm-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These update the ARM cpufreq drivers and fix up the CPPC cpufreq
driver after recent changes, update the OPP code and PM documentation
and add power sequences support to the system reboot and power off
code.
Specifics:
- Add Tegra234 cpufreq support (Sumit Gupta)
- Clean up and enhance the Mediatek cpufreq driver (Wan Jiabing,
Rex-BC Chen, and Jia-Wei Chang)
- Fix up the CPPC cpufreq driver after recent changes (Zheng Bin,
Pierre Gondois)
- Minor update to dt-binding for Qcom's opp-v2-kryo-cpu (Yassine
Oudjana)
- Use list iterator only inside the list_for_each_entry loop
(Xiaomeng Tong, and Jakob Koschel)
- New APIs related to finding OPP based on interconnect bandwidth
(Krzysztof Kozlowski)
- Fix the missing of_node_put() in _bandwidth_supported() (Dan
Carpenter)
- Cleanups (Krzysztof Kozlowski, and Viresh Kumar)
- Add Out of Band mode description to the intel-speed-select utility
documentation (Srinivas Pandruvada)
- Add power sequences support to the system reboot and power off code
and make related platform-specific changes for multiple platforms
(Dmitry Osipenko, Geert Uytterhoeven)"
* tag 'pm-5.19-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (60 commits)
cpufreq: CPPC: Fix unused-function warning
cpufreq: CPPC: Fix build error without CONFIG_ACPI_CPPC_CPUFREQ_FIE
Documentation: admin-guide: PM: Add Out of Band mode
kernel/reboot: Change registration order of legacy power-off handler
m68k: virt: Switch to new sys-off handler API
kernel/reboot: Add devm_register_restart_handler()
kernel/reboot: Add devm_register_power_off_handler()
soc/tegra: pmc: Use sys-off handler API to power off Nexus 7 properly
reboot: Remove pm_power_off_prepare()
regulator: pfuze100: Use devm_register_sys_off_handler()
ACPI: power: Switch to sys-off handler API
memory: emif: Use kernel_can_power_off()
mips: Use do_kernel_power_off()
ia64: Use do_kernel_power_off()
x86: Use do_kernel_power_off()
sh: Use do_kernel_power_off()
m68k: Switch to new sys-off handler API
powerpc: Use do_kernel_power_off()
xen/x86: Use do_kernel_power_off()
parisc: Use do_kernel_power_off()
...
- don't over-decrypt memory (Robin Murphy)
- takes min align mask into account for the swiotlb max mapping size
(Tianyu Lan)
- use GFP_ATOMIC in dma-debug (Mikulas Patocka)
- fix DMA_ATTR_NO_KERNEL_MAPPING on xen/arm (me)
- don't fail on highmem CMA pages in dma_direct_alloc_pages (me)
- cleanup swiotlb initialization and share more code with swiotlb-xen
(me, Stefano Stabellini)
-----BEGIN PGP SIGNATURE-----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=n2rk
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-5.19-2022-05-25' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping updates from Christoph Hellwig:
- don't over-decrypt memory (Robin Murphy)
- takes min align mask into account for the swiotlb max mapping size
(Tianyu Lan)
- use GFP_ATOMIC in dma-debug (Mikulas Patocka)
- fix DMA_ATTR_NO_KERNEL_MAPPING on xen/arm (me)
- don't fail on highmem CMA pages in dma_direct_alloc_pages (me)
- cleanup swiotlb initialization and share more code with swiotlb-xen
(me, Stefano Stabellini)
* tag 'dma-mapping-5.19-2022-05-25' of git://git.infradead.org/users/hch/dma-mapping: (23 commits)
dma-direct: don't over-decrypt memory
swiotlb: max mapping size takes min align mask into account
swiotlb: use the right nslabs-derived sizes in swiotlb_init_late
swiotlb: use the right nslabs value in swiotlb_init_remap
swiotlb: don't panic when the swiotlb buffer can't be allocated
dma-debug: change allocation mode from GFP_NOWAIT to GFP_ATIOMIC
dma-direct: don't fail on highmem CMA pages in dma_direct_alloc_pages
swiotlb-xen: fix DMA_ATTR_NO_KERNEL_MAPPING on arm
x86: remove cruft from <asm/dma-mapping.h>
swiotlb: remove swiotlb_init_with_tbl and swiotlb_init_late_with_tbl
swiotlb: merge swiotlb-xen initialization into swiotlb
swiotlb: provide swiotlb_init variants that remap the buffer
swiotlb: pass a gfp_mask argument to swiotlb_init_late
swiotlb: add a SWIOTLB_ANY flag to lift the low memory restriction
swiotlb: make the swiotlb_init interface more useful
x86: centralize setting SWIOTLB_FORCE when guest memory encryption is enabled
x86: remove the IOMMU table infrastructure
MIPS/octeon: use swiotlb_init instead of open coding it
arm/xen: don't check for xen_initial_domain() in xen_create_contiguous_region
swiotlb: rename swiotlb_late_init_with_default_size
...
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYosaQAAKCRCAXGG7T9hj
vil9AP9b4C+f9LTG0kAinjxLPyWE0Mo/iq3gO60MteZ2HyeI+AD/eSzJioJA0vyH
4pnU/UaGLJSp/B1LitLdjwoWIvwcEws=
=pDcW
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.19-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- decouple the PV interface from kernel internals in the Xen
scsifront/scsiback pv drivers
- harden the Xen scsifront PV driver against a malicious backend driver
- simplify Xen PV frontend driver ring page setup
- support Xen setups with multiple domains created at boot time to
tolerate Xenstore coming up late
- two small cleanup patches
* tag 'for-linus-5.19-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (29 commits)
xen: add support for initializing xenstore later as HVM domain
xen: sync xs_wire.h header with upstream xen
x86: xen: remove STACK_FRAME_NON_STANDARD from xen_cpuid
xen-blk{back,front}: Update contact points for buffer_squeeze_duration_ms and feature_persistent
xen/xenbus: eliminate xenbus_grant_ring()
xen/sndfront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/usbfront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/scsifront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/pcifront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/drmfront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/tpmfront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/netfront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/blkfront: use xenbus_setup_ring() and xenbus_teardown_ring()
xen/xenbus: add xenbus_setup_ring() service function
xen: update ring.h
xen/shbuf: switch xen-front-pgdir-shbuf to use INVALID_GRANT_REF
xen/dmabuf: switch gntdev-dmabuf to use INVALID_GRANT_REF
xen/sound: switch xen_snd_front to use INVALID_GRANT_REF
xen/drm: switch xen_drm_front to use INVALID_GRANT_REF
xen/usb: switch xen-hcd to use INVALID_GRANT_REF
...
- Initialize the per CPU structures during early boot so that the state
is consistent from the very beginning.
- Make the virtualization hotplug state handling more robust and let the
core bringup CPUs which timed out in an earlier attempt again.
- Make the x86/XEN CPU state tracking consistent on a failed online
attempt, so a consecutive bringup does not fall over the inconsistent
state.
-----BEGIN PGP SIGNATURE-----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=spQ9
-----END PGP SIGNATURE-----
Merge tag 'smp-core-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull CPU hotplug updates from Thomas Gleixner:
- Initialize the per-CPU structures during early boot so that the state
is consistent from the very beginning.
- Make the virtualization hotplug state handling more robust and let
the core bringup CPUs which timed out in an earlier attempt again.
- Make the x86/xen CPU state tracking consistent on a failed online
attempt, so a consecutive bringup does not fall over the inconsistent
state.
* tag 'smp-core-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpu/hotplug: Initialise all cpuhp_cpu_state structs earlier
cpu/hotplug: Allow the CPU in CPU_UP_PREPARE state to be brought up again.
x86/xen: Allow to retry if cpu_initialize_context() failed.
Kernel now supports chained power-off handlers. Use do_kernel_power_off()
that invokes chained power-off handlers. It also invokes legacy
pm_power_off() for now, which will be removed once all drivers will
be converted to the new sys-off API.
Acked-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since commit 4d65adfcd1 ("x86: xen: insn: Decode Xen and KVM
emulate-prefix signature"), objtool is able to correctly parse the
prefixed instruction in xen_cpuid and emit correct orc unwind
information. Hence, marking the function as STACKFRAME_NON_STANDARD is
no longer needed.
This commit is basically a revert of commit 983bb6d254 ("x86/xen: Mark
xen_cpuid() stack frame as non-standard").
Signed-off-by: Maximilian Heyne <mheyne@amazon.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
CC: Josh Poimboeuf <jpoimboe@kernel.org>
Link: https://lore.kernel.org/r/20220517162425.100567-1-mheyne@amazon.de
Signed-off-by: Juergen Gross <jgross@suse.com>
swiotlb-xen uses very different ways to allocate coherent memory on x86
vs arm. On the former it allocates memory from the page allocator, while
on the later it reuses the dma-direct allocator the handles the
complexities of non-coherent DMA on arm platforms.
Unfortunately the complexities of trying to deal with the two cases in
the swiotlb-xen.c code lead to a bug in the handling of
DMA_ATTR_NO_KERNEL_MAPPING on arm. With the DMA_ATTR_NO_KERNEL_MAPPING
flag the coherent memory allocator does not actually allocate coherent
memory, but just a DMA handle for some memory that is DMA addressable
by the device, but which does not have to have a kernel mapping. Thus
dereferencing the return value will lead to kernel crashed and memory
corruption.
Fix this by using the dma-direct allocator directly for arm, which works
perfectly fine because on arm swiotlb-xen is only used when the domain is
1:1 mapped, and then simplifying the remaining code to only cater for the
x86 case with DMA coherent device.
Reported-by: Rahul Singh <Rahul.Singh@arm.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Rahul Singh <rahul.singh@arm.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Tested-by: Rahul Singh <rahul.singh@arm.com>
The startup_xen() kernel entry point is referenced by the ".note.Xen"
section, and is the real entry point of the VM. Control transfer is
through IRET, which *could* set NEED_ENDBR, however Xen currently does
no such thing.
Add ANNOTATE_NOENDBR to silence future objtool warnings.
Fixes: ed53a0d971 ("x86/alternative: Use .ibt_endbr_seal to seal indirect calls")
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com>
Link: https://lkml.kernel.org/r/a87bd48b06d11ec4b98122a429e71e489b4e48c3.1650300597.git.jpoimboe@redhat.com
The IOMMU table tries to separate the different IOMMUs into different
backends, but actually requires various cross calls.
Rewrite the code to do the generic swiotlb/swiotlb-xen setup directly
in pci-dma.c and then just call into the IOMMU drivers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
If memory allocation in cpu_initialize_context() fails then it will
bring up the VCPU and leave with the corresponding CPU bit set in
xen_cpu_initialized_map.
The following (presumably successful) CPU bring up will BUG in
xen_pv_cpu_up() because nothing for that VCPU would be initialized.
Clear the CPU bits, that were set in cpu_initialize_context() in case
the memory allocation fails.
[ bigeasy: Creating a patch from Boris' email. ]
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220209080214.1439408-2-bigeasy@linutronix.de
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYkF9UwAKCRCAXGG7T9hj
vsXpAPwKXI4WIQcvnVCdULQfuXpA1TbD5XZuS9OuiN/OxWHbzAEA1VHWTmS+tpZ1
ptOyoGhAWhTGeplToobDSGz5qTXEPAI=
=FaKX
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- A bunch of minor cleanups
- A fix for kexec in Xen dom0 when executed on a high cpu number
- A fix for resuming after suspend of a Xen guest with assigned PCI
devices
- A fix for a crash due to not disabled preemption when resuming as Xen
dom0
* tag 'for-linus-5.18-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: fix is_xen_pmu()
xen: don't hang when resuming PCI device
arch:x86:xen: Remove unnecessary assignment in xen_apic_read()
xen/grant-table: remove readonly parameter from functions
xen/grant-table: remove gnttab_*transfer*() functions
drivers/xen: use helper macro __ATTR_RW
x86/xen: Fix kerneldoc warning
xen: delay xen_hvm_init_time_ops() if kdump is boot on vcpu>=32
xen: use time_is_before_eq_jiffies() instead of open coding it
is_xen_pmu() is taking the cpu number as parameter, but it is not using
it. Instead it just tests whether the Xen PMU initialization on the
current cpu did succeed. As this test is done by checking a percpu
pointer, preemption needs to be disabled in order to avoid switching
the cpu while doing the test. While resuming from suspend() this seems
not to be the case:
[ 88.082751] ACPI: PM: Low-level resume complete
[ 88.087933] ACPI: EC: EC started
[ 88.091464] ACPI: PM: Restoring platform NVS memory
[ 88.097166] xen_acpi_processor: Uploading Xen processor PM info
[ 88.103850] Enabling non-boot CPUs ...
[ 88.108128] installing Xen timer for CPU 1
[ 88.112763] BUG: using smp_processor_id() in preemptible [00000000] code: systemd-sleep/7138
[ 88.122256] caller is is_xen_pmu+0x12/0x30
[ 88.126937] CPU: 0 PID: 7138 Comm: systemd-sleep Tainted: G W 5.16.13-2.fc32.qubes.x86_64 #1
[ 88.137939] Hardware name: Star Labs StarBook/StarBook, BIOS 7.97 03/21/2022
[ 88.145930] Call Trace:
[ 88.148757] <TASK>
[ 88.151193] dump_stack_lvl+0x48/0x5e
[ 88.155381] check_preemption_disabled+0xde/0xe0
[ 88.160641] is_xen_pmu+0x12/0x30
[ 88.164441] xen_smp_intr_init_pv+0x75/0x100
Fix that by replacing is_xen_pmu() by a simple boolean variable which
reflects the Xen PMU initialization state on cpu 0.
Modify xen_pmu_init() to return early in case it is being called for a
cpu other than cpu 0 and the boolean variable not being set.
Fixes: bf6dfb154d ("xen/PMU: PMU emulation code")
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20220325142002.31789-1-jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
In the function xen_apic_read(), the initialized value of 'ret' is unused
because it will be assigned by the function HYPERVISOR_platform_op(),
thus remove it.
Signed-off-by: jianchunfu <jianchunfu@cmss.chinamobile.com>
Link: https://lore.kernel.org/r/20220314070514.2602-1-jianchunfu@cmss.chinamobile.com
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Even though Xen currently doesn't advertise IBT, prepare for when it
will eventually do so and sprinkle the ENDBR dust accordingly.
Even though most of the entry points are IRET like, the CPL0
Hypervisor can set WAIT-FOR-ENDBR and demand ENDBR at these sites.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154317.873919996@infradead.org
By doing an early rewrite of 'jmp native_iret` in
restore_regs_and_return_to_kernel() we can get rid of the last
INTERRUPT_RETURN user and paravirt_iret.
Suggested-by: Andrew Cooper <Andrew.Cooper3@citrix.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lore.kernel.org/r/20220308154317.815039833@infradead.org
Fix the following W=1 kernel warnings:
arch/x86/xen/setup.c:725: warning: expecting prototype for
machine_specific_memory_setup(). Prototype was for xen_memory_setup()
instead.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20220307062554.8334-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
The sched_clock() can be used very early since commit 857baa87b6
("sched/clock: Enable sched clock early"). In addition, with commit
38669ba205 ("x86/xen/time: Output xen sched_clock time from 0"), kdump
kernel in Xen HVM guest may panic at very early stage when accessing
&__this_cpu_read(xen_vcpu)->time as in below:
setup_arch()
-> init_hypervisor_platform()
-> x86_init.hyper.init_platform = xen_hvm_guest_init()
-> xen_hvm_init_time_ops()
-> xen_clocksource_read()
-> src = &__this_cpu_read(xen_vcpu)->time;
This is because Xen HVM supports at most MAX_VIRT_CPUS=32 'vcpu_info'
embedded inside 'shared_info' during early stage until xen_vcpu_setup() is
used to allocate/relocate 'vcpu_info' for boot cpu at arbitrary address.
However, when Xen HVM guest panic on vcpu >= 32, since
xen_vcpu_info_reset(0) would set per_cpu(xen_vcpu, cpu) = NULL when
vcpu >= 32, xen_clocksource_read() on vcpu >= 32 would panic.
This patch calls xen_hvm_init_time_ops() again later in
xen_hvm_smp_prepare_boot_cpu() after the 'vcpu_info' for boot vcpu is
registered when the boot vcpu is >= 32.
This issue can be reproduced on purpose via below command at the guest
side when kdump/kexec is enabled:
"taskset -c 33 echo c > /proc/sysrq-trigger"
The bugfix for PVM is not implemented due to the lack of testing
environment.
[boris: xen_hvm_init_time_ops() returns on errors instead of jumping to end]
Cc: Joe Jin <joe.jin@oracle.com>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20220302164032.14569-3-dongli.zhang@oracle.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Xen allows the usage of some previously reserved bits in the IO-APIC
RTE and the MSI address fields in order to store high bits for the
target APIC ID. Such feature is already implemented by QEMU/KVM and
HyperV, so in order to enable it just add the handler that checks for
it's presence.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20220120152527.7524-3-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
The initial change would not work when Xen was booted from EFI: There is
an early exit from the case block in that case. Move the necessary code
ahead of that.
Fixes: 335e4dd67b ("xen/x86: obtain upper 32 bits of video frame buffer address for Dom0")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/2501ce9d-40e5-b49d-b0e5-435544d17d4a@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
This started out with me noticing that "dom0_max_vcpus=<N>" with <N>
larger than the number of physical CPUs reported through ACPI tables
would not bring up the "excess" vCPU-s. Addressing this is the primary
purpose of the change; CPU maps handling is being tidied only as far as
is necessary for the change here (with the effect of also avoiding the
setting up of too much per-CPU infrastructure, i.e. for CPUs which can
never come online).
Noticing that xen_fill_possible_map() is called way too early, whereas
xen_filter_cpu_maps() is called too late (after per-CPU areas were
already set up), and further observing that each of the functions serves
only one of Dom0 or DomU, it looked like it was better to simplify this.
Use the .get_smp_config hook instead, uniformly for Dom0 and DomU.
xen_fill_possible_map() can be dropped altogether, while
xen_filter_cpu_maps() is re-purposed but not otherwise changed.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/2dbd5f0a-9859-ca2d-085e-a02f7166c610@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
There's no point in disabling x2APIC mode when running as a Xen HVM
guest, just enable it when available.
Remove some unneeded wrapping around the detection functions, and
simply provide a xen_x2apic_available helper that's a wrapper around
x2apic_supported.
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20220121090146.13697-1-roger.pau@citrix.com
Signed-off-by: Juergen Gross <jgross@suse.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYd729AAKCRCAXGG7T9hj
vmPzAP9MnRSseEV8C1t1naeW6W57DCQ9iTOXwC74q/5OxaINngEA7O2H6+FeRH63
lo3vOW/S2W8G+iqET5DQ9z3YDQnItww=
=Zlo8
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.17-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- a fix for the Xen gntdev driver
- a fix for running as Xen dom0 booted via EFI and the EFI framebuffer
being located above 4GB
- a series for support of mapping other guest's memory by using zone
device when running as Xen guest on Arm
* tag 'for-linus-5.17-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
dt-bindings: xen: Clarify "reg" purpose
arm/xen: Read extended regions from DT and init Xen resource
xen/unpopulated-alloc: Add mechanism to use Xen resource
xen/balloon: Bring alloc(free)_xenballooned_pages helpers back
arm/xen: Switch to use gnttab_setup_auto_xlat_frames() for DT
xen/unpopulated-alloc: Drop check for virt_addr_valid() in fill_list()
xen/x86: obtain upper 32 bits of video frame buffer address for Dom0
xen/gntdev: fix unmap notification order
misleading/wrong stacktraces and confuse RELIABLE_STACKTRACE and
LIVEPATCH as the backtrace misses the function which is being fixed up.
- Add Straight Light Speculation mitigation support which uses a new
compiler switch -mharden-sls= which sticks an INT3 after a RET or an
indirect branch in order to block speculation after them. Reportedly,
CPUs do speculate behind such insns.
- The usual set of cleanups and improvements
-----BEGIN PGP SIGNATURE-----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=R52z
-----END PGP SIGNATURE-----
Merge tag 'x86_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 core updates from Borislav Petkov:
- Get rid of all the .fixup sections because this generates
misleading/wrong stacktraces and confuse RELIABLE_STACKTRACE and
LIVEPATCH as the backtrace misses the function which is being fixed
up.
- Add Straight Line Speculation mitigation support which uses a new
compiler switch -mharden-sls= which sticks an INT3 after a RET or an
indirect branch in order to block speculation after them. Reportedly,
CPUs do speculate behind such insns.
- The usual set of cleanups and improvements
* tag 'x86_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
x86/entry_32: Fix segment exceptions
objtool: Remove .fixup handling
x86: Remove .fixup section
x86/word-at-a-time: Remove .fixup usage
x86/usercopy: Remove .fixup usage
x86/usercopy_32: Simplify __copy_user_intel_nocache()
x86/sgx: Remove .fixup usage
x86/checksum_32: Remove .fixup usage
x86/vmx: Remove .fixup usage
x86/kvm: Remove .fixup usage
x86/segment: Remove .fixup usage
x86/fpu: Remove .fixup usage
x86/xen: Remove .fixup usage
x86/uaccess: Remove .fixup usage
x86/futex: Remove .fixup usage
x86/msr: Remove .fixup usage
x86/extable: Extend extable functionality
x86/entry_32: Remove .fixup usage
x86/entry_64: Remove .fixup usage
x86/copy_mc_64: Remove .fixup usage
...
"Cleanup of the perf/kvm interaction."
-----BEGIN PGP SIGNATURE-----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=tU5G
-----END PGP SIGNATURE-----
Merge tag 'perf_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf updates from Borislav Petkov:
"Cleanup of the perf/kvm interaction."
* tag 'perf_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Drop guest callback (un)register stubs
KVM: arm64: Drop perf.c and fold its tiny bits of code into arm.c
KVM: arm64: Hide kvm_arm_pmu_available behind CONFIG_HW_PERF_EVENTS=y
KVM: arm64: Convert to the generic perf callbacks
KVM: x86: Move Intel Processor Trace interrupt handler to vmx.c
KVM: Move x86's perf guest info callbacks to generic KVM
KVM: x86: More precisely identify NMI from guest when handling PMI
KVM: x86: Drop current_vcpu for kvm_running_vcpu + kvm_arch_vcpu variable
perf/core: Use static_call to optimize perf_guest_info_callbacks
perf: Force architectures to opt-in to guest callbacks
perf: Add wrappers for invoking guest callbacks
perf/core: Rework guest callbacks to prepare for static_call support
perf: Drop dead and useless guest "support" from arm, csky, nds32 and riscv
perf: Stop pretending that perf can handle multiple guest callbacks
KVM: x86: Register Processor Trace interrupt hook iff PT enabled in guest
KVM: x86: Register perf callbacks after calling vendor's hardware_setup()
perf: Protect perf_guest_cbs with RCU
The hypervisor has been supplying this information for a couple of major
releases. Make use of it. The need to set a flag in the capabilities
field also points out that the prior setting of that field from the
hypervisor interface's gbl_caps one was wrong, so that code gets deleted
(there's also no equivalent of this in native boot code).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/a3df8bf3-d044-b7bb-3383-cd5239d6d4af@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
Replace all ret/retq instructions with RET in preparation of making
RET a macro. Since AS is case insensitive it's a big no-op without
RET defined.
find arch/x86/ -name \*.S | while read file
do
sed -i 's/\<ret[q]*\>/RET/' $file
done
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lore.kernel.org/r/20211204134907.905503893@infradead.org
In the native case, PER_CPU_VAR(cpu_tss_rw + TSS_sp0) is the
trampoline stack. But XEN pv doesn't use trampoline stack, so
PER_CPU_VAR(cpu_tss_rw + TSS_sp0) is also the kernel stack.
In that case, source and destination stacks are identical, which means
that reusing swapgs_restore_regs_and_return_to_usermode() in XEN pv
would cause %rsp to move up to the top of the kernel stack and leave the
IRET frame below %rsp.
This is dangerous as it can be corrupted if #NMI / #MC hit as either of
these events occurring in the middle of the stack pushing would clobber
data on the (original) stack.
And, with XEN pv, swapgs_restore_regs_and_return_to_usermode() pushing
the IRET frame on to the original address is useless and error-prone
when there is any future attempt to modify the code.
[ bp: Massage commit message. ]
Fixes: 7f2590a110 ("x86/entry/64: Use a per-CPU trampoline stack for IDT entries")
Signed-off-by: Lai Jiangshan <laijs@linux.alibaba.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lkml.kernel.org/r/20211126101209.8613-4-jiangshanlai@gmail.com
Introduce GUEST_PERF_EVENTS and require architectures to select it to
allow registering and using guest callbacks in perf. This will hopefully
make it more difficult for new architectures to add useless "support" for
guest callbacks, e.g. via copy+paste.
Stubbing out the helpers has the happy bonus of avoiding a load of
perf_guest_cbs when GUEST_PERF_EVENTS=n on arm64/x86.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20211111020738.2512932-9-seanjc@google.com
To prepare for using static_calls to optimize perf's guest callbacks,
replace ->is_in_guest and ->is_user_mode with a new multiplexed hook
->state, tweak ->handle_intel_pt_intr to play nice with being called when
there is no active guest, and drop "guest" from ->get_guest_ip.
Return '0' from ->state and ->handle_intel_pt_intr to indicate "not in
guest" so that DEFINE_STATIC_CALL_RET0 can be used to define the static
calls, i.e. no callback == !guest.
[sean: extracted from static_call patch, fixed get_ip() bug, wrote changelog]
Suggested-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Originally-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Link: https://lore.kernel.org/r/20211111020738.2512932-7-seanjc@google.com
Commit 66558b730f ("sched: Add cluster scheduler level for x86")
introduced cpu_l2c_shared_map mask which is expected to be initialized
by smp_op.smp_prepare_cpus(). That commit only updated
native_smp_prepare_cpus() version but not xen_pv_smp_prepare_cpus().
As result Xen PV guests crash in set_cpu_sibling_map().
While the new mask can be allocated in xen_pv_smp_prepare_cpus() one can
see that both versions of smp_prepare_cpus ops share a number of common
operations that can be factored out. So do that instead.
Fixes: 66558b730f ("sched: Add cluster scheduler level for x86")
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lkml.kernel.org/r/1635896196-18961-1-git-send-email-boris.ostrovsky@oracle.com
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRTLbB6QfY48x44uB6AXGG7T9hjvgUCYYp8HgAKCRCAXGG7T9hj
vmuVAP4whjbyIi4IxYEOnE6On0aD0AgUMiFa7QXrDZi6NXUQIwEAnggLFe+rEG5C
Fwi/cEXSHrRgveqrgD4GYEr6l0GTxwM=
=/fMa
-----END PGP SIGNATURE-----
Merge tag 'for-linus-5.16b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen updates from Juergen Gross:
- a series to speed up the boot of Xen PV guests
- some cleanups in Xen related code
- replacement of license texts with the appropriate SPDX headers and
fixing of wrong SPDX headers in Xen header files
- a small series making paravirtualized interrupt masking much simpler
and at the same time removing complaints of objtool
- a fix for Xen ballooning hogging workqueues for too long
- enablement of the Xen pciback driver for Arm
- some further small fixes/enhancements
* tag 'for-linus-5.16b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (22 commits)
xen/balloon: fix unused-variable warning
xen/balloon: rename alloc/free_xenballooned_pages
xen/balloon: add late_initcall_sync() for initial ballooning done
x86/xen: remove 32-bit awareness from startup_xen
xen: remove highmem remnants
xen: allow pv-only hypercalls only with CONFIG_XEN_PV
x86/xen: remove 32-bit pv leftovers
xen-pciback: allow compiling on other archs than x86
x86/xen: switch initial pvops IRQ functions to dummy ones
x86/xen: remove xen_have_vcpu_info_placement flag
x86/pvh: add prototype for xen_pvh_init()
xen: Fix implicit type conversion
xen: fix wrong SPDX headers of Xen related headers
xen/pvcalls-back: Remove redundant 'flush_workqueue()' calls
x86/xen: Remove redundant irq_enter/exit() invocations
xen-pciback: Fix return in pm_ctrl_init()
xen/x86: restrict PV Dom0 identity mapping
xen/x86: there's no highmem anymore in PV mode
xen/x86: adjust handling of the L3 user vsyscall special page table
xen/x86: adjust xen_set_fixmap()
...
Merge more updates from Andrew Morton:
"87 patches.
Subsystems affected by this patch series: mm (pagecache and hugetlb),
procfs, misc, MAINTAINERS, lib, checkpatch, binfmt, kallsyms, ramfs,
init, codafs, nilfs2, hfs, crash_dump, signals, seq_file, fork,
sysvfs, kcov, gdb, resource, selftests, and ipc"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (87 commits)
ipc/ipc_sysctl.c: remove fallback for !CONFIG_PROC_SYSCTL
ipc: check checkpoint_restore_ns_capable() to modify C/R proc files
selftests/kselftest/runner/run_one(): allow running non-executable files
virtio-mem: disallow mapping virtio-mem memory via /dev/mem
kernel/resource: disallow access to exclusive system RAM regions
kernel/resource: clean up and optimize iomem_is_exclusive()
scripts/gdb: handle split debug for vmlinux
kcov: replace local_irq_save() with a local_lock_t
kcov: avoid enable+disable interrupts if !in_task()
kcov: allocate per-CPU memory on the relevant node
Documentation/kcov: define `ip' in the example
Documentation/kcov: include types.h in the example
sysv: use BUILD_BUG_ON instead of runtime check
kernel/fork.c: unshare(): use swap() to make code cleaner
seq_file: fix passing wrong private data
seq_file: move seq_escape() to a header
signal: remove duplicate include in signal.h
crash_dump: remove duplicate include in crash_dump.h
crash_dump: fix boolreturn.cocci warning
hfs/hfsplus: use WARN_ON for sanity check
...
Let's support multiple registered callbacks, making sure that
registering vmcore callbacks cannot fail. Make the callback return a
bool instead of an int, handling how to deal with errors internally.
Drop unused HAVE_OLDMEM_PFN_IS_RAM.
We soon want to make use of this infrastructure from other drivers:
virtio-mem, registering one callback for each virtio-mem device, to
prevent reading unplugged virtio-mem memory.
Handle it via a generic vmcore_cb structure, prepared for future
extensions: for example, once we support virtio-mem on s390x where the
vmcore is completely constructed in the second kernel, we want to detect
and add plugged virtio-mem memory ranges to the vmcore in order for them
to get dumped properly.
Handle corner cases that are unexpected and shouldn't happen in sane
setups: registering a callback after the vmcore has already been opened
(warn only) and unregistering a callback after the vmcore has already been
opened (warn and essentially read only zeroes from that point on).
Link: https://lkml.kernel.org/r/20211005121430.30136-6-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
HVMOP_get_mem_type is not expected to fail, "This call failing is
indication of something going quite wrong and it would be good to know
about this." [1]
Let's add a pr_warn_once().
Link: https://lkml.kernel.org/r/3b935aa0-6d85-0bcd-100e-15098add3c4c@oracle.com [1]
Link: https://lkml.kernel.org/r/20211005121430.30136-4-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Suggested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Young <dyoung@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Let's simplify return handling.
Link: https://lkml.kernel.org/r/20211005121430.30136-3-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
After removing /dev/kmem, sanitizing /proc/kcore and handling /dev/mem,
this series tackles the last sane way how a VM could accidentially
access logically unplugged memory managed by a virtio-mem device:
/proc/vmcore
When dumping memory via "makedumpfile", PG_offline pages, used by
virtio-mem to flag logically unplugged memory, are already properly
excluded; however, especially when accessing/copying /proc/vmcore "the
usual way", we can still end up reading logically unplugged memory part
of a virtio-mem device.
Patch #1-#3 are cleanups. Patch #4 extends the existing
oldmem_pfn_is_ram mechanism. Patch #5-#7 are virtio-mem refactorings
for patch #8, which implements the virtio-mem logic to query the state
of device blocks.
Patch #8:
"Although virtio-mem currently supports reading unplugged memory in the
hypervisor, this will change in the future, indicated to the device
via a new feature flag. We similarly sanitized /proc/kcore access
recently.
[...]
Distributions that support virtio-mem+kdump have to make sure that the
virtio_mem module will be part of the kdump kernel or the kdump
initrd; dracut was recently [2] extended to include virtio-mem in the
generated initrd. As long as no special kdump kernels are used, this
will automatically make sure that virtio-mem will be around in the
kdump initrd and sanitize /proc/vmcore access -- with dracut"
This is the last remaining bit to support
VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE [3] in the Linux implementation of
virtio-mem.
Note: this is best-effort. We'll never be able to control what runs
inside the second kernel, really, but we also don't have to care: we
only care about sane setups where we don't want our VM getting zapped
once we touch the wrong memory location while dumping. While we usually
expect sane setups to use "makedumfile", nothing really speaks against
just copying /proc/vmcore, especially in environments where HWpoisioning
isn't typically expected. Also, we really don't want to put all our
trust completely on the memmap, so sanitizing also makes sense when just
using "makedumpfile".
[1] https://lkml.kernel.org/r/20210526093041.8800-1-david@redhat.com
[2] https://github.com/dracutdevs/dracut/pull/1157
[3] https://lists.oasis-open.org/archives/virtio-comment/202109/msg00021.html
This patch (of 9):
The callback is only used for the vmcore nowadays.
Link: https://lkml.kernel.org/r/20211005121430.30136-1-david@redhat.com
Link: https://lkml.kernel.org/r/20211005121430.30136-2-david@redhat.com
Signed-off-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Boris Ostrovsky <boris.ostrvsky@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Stefano Stabellini <sstabellini@kernel.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: "Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge misc updates from Andrew Morton:
"257 patches.
Subsystems affected by this patch series: scripts, ocfs2, vfs, and
mm (slab-generic, slab, slub, kconfig, dax, kasan, debug, pagecache,
gup, swap, memcg, pagemap, mprotect, mremap, iomap, tracing, vmalloc,
pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, tools,
memblock, oom-kill, hugetlbfs, migration, thp, readahead, nommu, ksm,
vmstat, madvise, memory-hotplug, rmap, zsmalloc, highmem, zram,
cleanups, kfence, and damon)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (257 commits)
mm/damon: remove return value from before_terminate callback
mm/damon: fix a few spelling mistakes in comments and a pr_debug message
mm/damon: simplify stop mechanism
Docs/admin-guide/mm/pagemap: wordsmith page flags descriptions
Docs/admin-guide/mm/damon/start: simplify the content
Docs/admin-guide/mm/damon/start: fix a wrong link
Docs/admin-guide/mm/damon/start: fix wrong example commands
mm/damon/dbgfs: add adaptive_targets list check before enable monitor_on
mm/damon: remove unnecessary variable initialization
Documentation/admin-guide/mm/damon: add a document for DAMON_RECLAIM
mm/damon: introduce DAMON-based Reclamation (DAMON_RECLAIM)
selftests/damon: support watermarks
mm/damon/dbgfs: support watermarks
mm/damon/schemes: activate schemes based on a watermarks mechanism
tools/selftests/damon: update for regions prioritization of schemes
mm/damon/dbgfs: support prioritization weights
mm/damon/vaddr,paddr: support pageout prioritization
mm/damon/schemes: prioritize regions within the quotas
mm/damon/selftests: support schemes quotas
mm/damon/dbgfs: support quotas of schemes
...
Rename memblock_free_ptr() to memblock_free() and use memblock_free()
when freeing a virtual pointer so that memblock_free() will be a
counterpart of memblock_alloc()
The callers are updated with the below semantic patch and manual
addition of (void *) casting to pointers that are represented by
unsigned long variables.
@@
identifier vaddr;
expression size;
@@
(
- memblock_phys_free(__pa(vaddr), size);
+ memblock_free(vaddr, size);
|
- memblock_free_ptr(vaddr, size);
+ memblock_free(vaddr, size);
)
[sfr@canb.auug.org.au: fixup]
Link: https://lkml.kernel.org/r/20211018192940.3d1d532f@canb.auug.org.au
Link: https://lkml.kernel.org/r/20210930185031.18648-7-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Juergen Gross <jgross@suse.com>
Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since memblock_free() operates on a physical range, make its name
reflect it and rename it to memblock_phys_free(), so it will be a
logical counterpart to memblock_phys_alloc().
The callers are updated with the below semantic patch:
@@
expression addr;
expression size;
@@
- memblock_free(addr, size);
+ memblock_phys_free(addr, size);
Link: https://lkml.kernel.org/r/20210930185031.18648-6-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Juergen Gross <jgross@suse.com>
Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
free_p2m_page() wrongly passes a virtual pointer to memblock_free() that
treats it as a physical address.
Call memblock_free_ptr() instead that gets a virtual address to free the
memory.
Link: https://lkml.kernel.org/r/20210930185031.18648-3-rppt@kernel.org
Signed-off-by: Mike Rapoport <rppt@linux.ibm.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Christophe Leroy <christophe.leroy@csgroup.eu>
Cc: Shahab Vahedi <Shahab.Vahedi@synopsys.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>