Граф коммитов

116 Коммитов

Автор SHA1 Сообщение Дата
Peter Zijlstra b75b7f8ef1 x86/xen: Rename SYS* entry points
Native SYS{CALL,ENTER} entry points are called
entry_SYS{CALL,ENTER}_{64,compat}, make sure the Xen versions are
named consistently.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Josh Poimboeuf <jpoimboe@kernel.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
2022-06-27 10:33:59 +02:00
Juergen Gross 12ad6cfc09 x86/xen: remove xen_have_vcpu_info_placement flag
The flag xen_have_vcpu_info_placement was needed to support Xen
hypervisors older than version 3.4, which didn't support the
VCPUOP_register_vcpu_info hypercall. Today the Linux kernel requires
at least Xen 4.0 to be able to run, so xen_have_vcpu_info_placement
can be dropped (in theory the flag was used to ensure a working kernel
even in case of the VCPUOP_register_vcpu_info hypercall failing for
other reasons than the hypercall not being supported, but the only
cases covered by the flag would be parameter errors, which ought not
to be made anyway).

This allows to let some functions return void now, as they can never
fail.

Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Link: https://lore.kernel.org/r/20211028072748.29862-2-jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2021-11-02 07:45:44 -05:00
Jan Beulich 079c4baa2a xen/x86: hook up xen_banner() also for PVH
This was effectively lost while dropping PVHv1 code. Move the function
and arrange for it to be called the same way as done in PV mode. Clearly
this then needs re-introducing the XENFEAT_mmu_pt_update_preserve_ad
check that was recently removed, as that's a PV-only feature.

Since the string pointed at by pv_info.name describes the mode, drop
"paravirtualized" from the log message while moving the code.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/de03054d-a20d-2114-bb86-eec28e17b3b8@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
2021-10-05 08:36:14 +02:00
Jan Beulich 4d1ab432ac xen/x86: generalize preferred console model from PV to PVH Dom0
Without announcing hvc0 as preferred it won't get used as long as tty0
gets registered earlier. This is particularly problematic with there not
being any screen output for PVH Dom0 when the screen is in graphics
mode, as the necessary information doesn't get conveyed yet from the
hypervisor.

Follow PV's model, but be conservative and do this for Dom0 only for
now.

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/582328b6-c86c-37f3-d802-5539b7a86736@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
2021-10-05 08:36:12 +02:00
Jan Beulich cae7d81a37 xen/x86: allow PVH Dom0 without XEN_PV=y
Decouple XEN_DOM0 from XEN_PV, converting some existing uses of XEN_DOM0
to a new XEN_PV_DOM0. (I'm not convinced all are really / should really
be PV-specific, but for starters I've tried to be conservative.)

For PVH Dom0 the hypervisor populates MADT with only x2APIC entries, so
without x2APIC support enabled in the kernel things aren't going to work
very well. (As opposed, DomU-s would only ever see LAPIC entries in MADT
as of now.) Note that this then requires PVH Dom0 to be 64-bit, as
X86_X2APIC depends on X86_64.

In the course of this xen_running_on_version_or_later() needs to be
available more broadly. Move it from a PV-specific to a generic file,
considering that what it does isn't really PV-specific at all anyway.

Note that xen/interface/version.h cannot be included on its own; in
enlighten.c, which uses SCHEDOP_* anyway, include xen/interface/sched.h
first to resolve the apparently sole missing type (xen_ulong_t).

Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>

Link: https://lore.kernel.org/r/983bb72f-53df-b6af-14bd-5e088bd06a08@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
2021-10-05 08:35:56 +02:00
Juergen Gross ab234a260b x86/pv: Rework arch_local_irq_restore() to not use popf
POPF is a rather expensive operation, so don't use it for restoring
irq flags. Instead, test whether interrupts are enabled in the flags
parameter and enable interrupts via STI in that case.

This results in the restore_fl paravirt op to be no longer needed.

Suggested-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210120135555.32594-7-jgross@suse.com
2021-02-10 12:36:45 +01:00
Juergen Gross afd30525a6 x86/xen: Drop USERGS_SYSRET64 paravirt call
USERGS_SYSRET64 is used to return from a syscall via SYSRET, but
a Xen PV guest will nevertheless use the IRET hypercall, as there
is no sysret PV hypercall defined.

So instead of testing all the prerequisites for doing a sysret and
then mangling the stack for Xen PV again for doing an iret just use
the iret exit from the beginning.

This can easily be done via an ALTERNATIVE like it is done for the
sysenter compat case already.

It should be noted that this drops the optimization in Xen for not
restoring a few registers when returning to user mode, but it seems
as if the saved instructions in the kernel more than compensate for
this drop (a kernel build in a Xen PV guest was slightly faster with
this patch applied).

While at it remove the stale sysret32 remnants.

Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20210120135555.32594-6-jgross@suse.com
2021-02-10 12:32:07 +01:00
Juergen Gross d04b1ae5a9 xen/events: only register debug interrupt for 2-level events
xen_debug_interrupt() is specific to 2-level event handling. So don't
register it with fifo event handling being active.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Link: https://lore.kernel.org/r/20201022094907.28560-4-jgross@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2020-10-23 05:41:25 -05:00
Juergen Gross a13f2ef168 x86/xen: remove 32-bit Xen PV guest support
Xen is requiring 64-bit machines today and since Xen 4.14 it can be
built without 32-bit PV guest support. There is no need to carry the
burden of 32-bit PV guest support in the kernel any longer, as new
guests can be either HVM or PVH, or they can use a 64 bit kernel.

Remove the 32-bit Xen PV support from the kernel.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
2020-08-11 08:26:48 +02:00
Vitaly Kuznetsov 998c2034c6 xen: Move xen_setup_callback_vector() definition to include/xen/hvm.h
Kbuild test robot reports the following problem on ARM:

  for 'xen_setup_callback_vector' [-Wmissing-prototypes]
1664 | void xen_setup_callback_vector(void) {}
|      ^~~~~~~~~~~~~~~~~~~~~~~~~

The problem is that xen_setup_callback_vector is a x86 only thing, its
definition is present in arch/x86/xen/xen-ops.h but not on ARM. In
events_base.c there is a stub for !CONFIG_XEN_PVHVM but it is not declared
as 'static'.

On x86 the situation is hardly better: drivers/xen/events/events_base.c
doesn't include 'xen-ops.h' from arch/x86/xen/, it includes its namesake
from include/xen/ which also results in a 'no previous prototype' warning.

Currently, xen_setup_callback_vector() has two call sites: one in
drivers/xen/events_base.c and another in arch/x86/xen/suspend_hvm.c. The
former is placed under #ifdef CONFIG_X86 and the later is only compiled
in when CONFIG_XEN_PVHVM.

Resolve the issue by moving xen_setup_callback_vector() declaration to
arch neutral 'include/xen/hvm.h' as the implementation lives in arch
neutral drivers/xen/events/events_base.c.

Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lkml.kernel.org/r/20200520161600.361895-1-vkuznets@redhat.com
2020-06-11 15:15:19 +02:00
Thomas Gleixner 2f6474e463 x86/entry: Switch XEN/PV hypercall entry to IDTENTRY
Convert the XEN/PV hypercall to IDTENTRY:

  - Emit the ASM stub with DECLARE_IDTENTRY
  - Remove the ASM idtentry in 64-bit
  - Remove the open coded ASM entry code in 32-bit
  - Remove the old prototypes

The handler stubs need to stay in ASM code as they need corner case handling
and adjustment of the stack pointer.

Provide a new C function which invokes the entry/exit handling and calls
into the XEN handler on the interrupt stack if required.

The exit code is slightly different from the regular idtentry_exit() on
non-preemptible kernels. If the hypercall is preemptible and need_resched()
is set then XEN provides a preempt hypercall scheduling function.

Move this functionality into the entry code so it can use the existing
idtentry functionality.

[ mingo: Build fixes. ]

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andy Lutomirski <luto@kernel.org>
Acked-by: Juergen Gross <jgross@suse.com>
Tested-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20200521202118.055270078@linutronix.de
2020-06-11 15:15:08 +02:00
Vitaly Kuznetsov a0bb51f263 x86/xen: Split HVM vector callback setup and interrupt gate allocation
As a preparatory change for making alloc_intr_gate() __init split
xen_callback_vector() into callback vector setup via hypercall
(xen_setup_callback_vector()) and interrupt gate allocation
(xen_alloc_callback_vector()).

xen_setup_callback_vector() is being called twice: on init and upon
system resume from xen_hvm_post_suspend(). alloc_intr_gate() only
needs to be called once.

Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/20200428093824.1451532-2-vkuznets@redhat.com
2020-06-11 15:14:32 +02:00
Peter Zijlstra 55aedddb61 x86/paravirt: Make read_cr2() CALLEE_SAVE
The one paravirt read_cr2() implementation (Xen) is actually quite trivial
and doesn't need to clobber anything other than the return register.

Making read_cr2() CALLEE_SAVE avoids all the PUSH/POP nonsense and allows
more convenient use from assembly.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: bp@alien8.de
Cc: rostedt@goodmis.org
Cc: luto@kernel.org
Cc: torvalds@linux-foundation.org
Cc: hpa@zytor.com
Cc: dave.hansen@linux.intel.com
Cc: zhe.he@windriver.com
Cc: joel@joelfernandes.org
Cc: devel@etsukata.com
Link: https://lkml.kernel.org/r/20190711114335.887392493@infradead.org
2019-07-17 23:17:37 +02:00
Roger Pau Monne 72813bfbf0 xen/pvh: correctly setup the PV EFI interface for dom0
This involves initializing the boot params EFI related fields and the
efi global variable.

Without this fix a PVH dom0 doesn't detect when booted from EFI, and
thus doesn't support accessing any of the EFI related data.

Reported-by: PGNet Dev <pgnet.dev@gmail.com>
Signed-off-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: stable@vger.kernel.org # 4.19+
2019-04-25 10:36:25 -04:00
Juergen Gross df11b6912f x86/xen: remove unused function xen_auto_xlated_memory_setup()
xen_auto_xlated_memory_setup() is a leftover from PVH V1. Remove it.

Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-08-20 14:46:18 -04:00
Pavel Tatashin 7b25b9cb0d x86/xen/time: Initialize pv xen time in init_hypervisor_platform()
In every hypervisor except for xen pv time ops are initialized in
init_hypervisor_platform().

Xen PV domains initialize time ops in x86_init.paging.pagetable_init(),
by calling xen_setup_shared_info() which is a poor design, as time is
needed prior to memory allocator.

xen_setup_shared_info() is called from two places: during boot, and
after suspend. Split the content of xen_setup_shared_info() into
three places:

1. add the clock relavent data into new xen pv init_platform vector, and
   set clock ops in there.

2. move xen_setup_vcpu_info_placement() to new xen_pv_guest_late_init()
   call.

3. Re-initializing parts of shared info copy to xen_pv_post_suspend() to
   be symmetric to xen_pv_pre_suspend

Signed-off-by: Pavel Tatashin <pasha.tatashin@oracle.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: steven.sistare@oracle.com
Cc: daniel.m.jordan@oracle.com
Cc: linux@armlinux.org.uk
Cc: schwidefsky@de.ibm.com
Cc: heiko.carstens@de.ibm.com
Cc: john.stultz@linaro.org
Cc: sboyd@codeaurora.org
Cc: hpa@zytor.com
Cc: douly.fnst@cn.fujitsu.com
Cc: peterz@infradead.org
Cc: prarit@redhat.com
Cc: feng.tang@intel.com
Cc: pmladek@suse.com
Cc: gnomes@lxorguk.ukuu.org.uk
Cc: linux-s390@vger.kernel.org
Cc: boris.ostrovsky@oracle.com
Cc: jgross@suse.com
Cc: pbonzini@redhat.com
Link: https://lkml.kernel.org/r/20180719205545.16512-13-pasha.tatashin@oracle.com
2018-07-20 00:02:39 +02:00
Linus Torvalds aefd140437 xen: fixes for 4.15-rc8
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABAgAGBQJaWMzkAAoJELDendYovxMvyRQH/34SP3oe7EtapIwDg0YqXBgJ
 0nX2ZgMvhylR1ANZ4mPwP5z/CQZvrFWWAqhPZdGTntrzkvsNf5uZ0s38f3fk/eu8
 3XxSDoZRrr/RFms42smS3NZRMFgagzLRrCVZrFWgFaDmsa/2/e6k46GAPRHI8Chg
 tEB6h8yHp1R9s4Z232I5pkilA7/ggABk8oRgKWQzrVqnfuD0G+byDm0h0kgan6br
 a63XVD1JTGCmEFI2KaRCthd+r5H34oDMEUS4anJXVdWwid23rSbsAsbO7Cfb9qKR
 XDA/ls371IrcqiHhnWepuXyUs811hF8qRoSTmG6gDtPXxazONcw0x0L8lK+S5Wo=
 =gLWS
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-4.15-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull xen fixes from Juergen Gross:
 "This contains two build fixes for clang and two fixes for rather
  unlikely situations in the Xen gntdev driver"

* tag 'for-linus-4.15-rc8-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/gntdev: Fix partial gntdev_mmap() cleanup
  xen/gntdev: Fix off-by-one error when unmapping with holes
  x86: xen: remove the use of VLAIS
  x86/xen/time: fix section mismatch for xen_init_time_ops()
2018-01-12 10:00:15 -08:00
Nick Desaulniers 0dd6d272d3 x86/xen/time: fix section mismatch for xen_init_time_ops()
The header declares this function as __init but is defined in __ref
section.

Signed-off-by: Nick Desaulniers <nick.desaulniers@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2018-01-08 09:40:57 -05:00
Linus Torvalds 051089a2ee xen: features and fixes for v4.15-rc1
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2
 
 iQEcBAABAgAGBQJaDdh4AAoJELDendYovxMvPFAH/2QjTys2ydIAdmwke4odpJ7U
 xuy7HOQCzOeZ5YsZthzCBsN90VmnDM7X7CcB8weSdjcKlXMSAWD+J1RgkL2iAJhI
 8tzIEXECrlNuz4V5mX9TmMgtPCr4qzU3fsts0pZy4fYDq1PVWDefqOwEtbpbWabb
 wRSMq/nTb9iASTMgheSC0WfhJneqtJ+J20zrzkGPCBPRFcwfppeP8/7vpkmJslBi
 eH/pfchICM4w093T/BfavnsPvhLdjgRuwVzn6+e46s4tLnZAxnLRVQ7SXZXzBORq
 /dL/qC0XH3YXdU+XfIs//giZsmLns6SxZaMr4vs6TxFtuzZBKpLtkOKo9zndvxk=
 =sZY5
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-4.15-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull xen updates from Juergen Gross:
 "Xen features and fixes for v4.15-rc1

  Apart from several small fixes it contains the following features:

   - a series by Joao Martins to add vdso support of the pv clock
     interface

   - a series by Juergen Gross to add support for Xen pv guests to be
     able to run on 5 level paging hosts

   - a series by Stefano Stabellini adding the Xen pvcalls frontend
     driver using a paravirtualized socket interface"

* tag 'for-linus-4.15-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: (34 commits)
  xen/pvcalls: fix potential endless loop in pvcalls-front.c
  xen/pvcalls: Add MODULE_LICENSE()
  MAINTAINERS: xen, kvm: track pvclock-abi.h changes
  x86/xen/time: setup vcpu 0 time info page
  x86/xen/time: set pvclock flags on xen_time_init()
  x86/pvclock: add setter for pvclock_pvti_cpu0_va
  ptp_kvm: probe for kvm guest availability
  xen/privcmd: remove unused variable pageidx
  xen: select grant interface version
  xen: update arch/x86/include/asm/xen/cpuid.h
  xen: add grant interface version dependent constants to gnttab_ops
  xen: limit grant v2 interface to the v1 functionality
  xen: re-introduce support for grant v2 interface
  xen: support priv-mapping in an HVM tools domain
  xen/pvcalls: remove redundant check for irq >= 0
  xen/pvcalls: fix unsigned less than zero error check
  xen/time: Return -ENODEV from xen_get_wallclock()
  xen/pvcalls-front: mark expected switch fall-through
  xen: xenbus_probe_frontend: mark expected switch fall-throughs
  xen/time: do not decrease steal time after live migration on xen
  ...
2017-11-16 13:06:27 -08:00
Joao Martins 2229f70b5b x86/xen/time: setup vcpu 0 time info page
In order to support pvclock vdso on xen we need to setup the time
info page for vcpu 0 and register the page with Xen using the
VCPUOP_register_vcpu_time_memory_area hypercall. This hypercall
will also forcefully update the pvti which will set some of the
necessary flags for vdso. Afterwards we check if it supports the
PVCLOCK_TSC_STABLE_BIT flag which is mandatory for having
vdso/vsyscall support. And if so, it will set the cpu 0 pvti that
will be later on used when mapping the vdso image.

The xen headers are also updated to include the new hypercall for
registering the secondary vcpu_time_info struct.

Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
2017-11-08 16:33:14 -05:00
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00
Juergen Gross 5878d5d6fd x86/xen: Get rid of paravirt op adjust_exception_frame
When running as Xen pv-guest the exception frame on the stack contains
%r11 and %rcx additional to the other data pushed by the processor.

Instead of having a paravirt op being called for each exception type
prepend the Xen specific code to each exception entry. When running as
Xen pv-guest just use the exception entry with prepended instructions,
otherwise use the entry without the Xen specific code.

[ tglx: Merged through tip to avoid ugly merge conflict ]

Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: xen-devel@lists.xenproject.org
Cc: boris.ostrovsky@oracle.com
Cc: luto@amacapital.net
Link: http://lkml.kernel.org/r/20170831174249.26853-1-jg@pfupf.net
2017-08-31 21:35:10 +02:00
Juergen Gross edcb5cf84f x86/paravirt/xen: Remove xen_patch()
Xen's paravirt patch function xen_patch() does some special casing for
irq_ops functions to apply relocations when those functions can be
patched inline instead of calls.

Unfortunately none of the special case function replacements is small
enough to be patched inline, so the special case never applies.

As xen_patch() will call paravirt_patch_default() in all cases it can
be just dropped. xen-asm.h doesn't seem necessary without xen_patch()
as the only thing left in it would be the definition of XEN_EFLAGS_NMI
used only once. So move that definition and remove xen-asm.h.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: boris.ostrovsky@oracle.com
Cc: lguest@lists.ozlabs.org
Cc: rusty@rustcorp.com.au
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/20170816173157.8633-2-jgross@suse.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-08-24 09:57:24 +02:00
Ankur Arora c9b5d98b25 xen/vcpu: Handle xen_vcpu_setup() failure in hotplug
The hypercall VCPUOP_register_vcpu_info can fail. This failure is
handled by making per_cpu(xen_vcpu, cpu) point to its shared_info
slot and those without one (cpu >= MAX_VIRT_CPUS) be NULL.

For PVH/PVHVM, this is not enough, because we also need to pull
these VCPUs out of circulation.

Fix for PVH/PVHVM: on registration failure in the cpuhp prepare
callback (xen_cpu_up_prepare_hvm()), return an error to the cpuhp
state-machine so it can fail the CPU init.

Fix for PV: the registration happens before smp_init(), so, in the
failure case we clamp setup_max_cpus and limit the number of VCPUs
that smp_init() will bring-up to MAX_VIRT_CPUS.
This is functionally correct but it makes the code a bit simpler
if we get rid of this explicit clamping: for VCPUs that don't have
valid xen_vcpu, fail the CPU init in the cpuhp prepare callback
(xen_cpu_up_prepare_pv()).

Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
2017-06-13 16:10:55 +02:00
Ankur Arora ad73fd595c xen/vcpu: Simplify xen_vcpu related code
Largely mechanical changes to aid unification of xen_vcpu_restore()
logic for PV, PVH and PVHVM.

xen_vcpu_setup(): the only change in logic is that clamp_max_cpus()
is now handled inside the "if (!xen_have_vcpu_info_placement)" block.

xen_vcpu_restore(): code movement from enlighten_pv.c to enlighten.c.

xen_vcpu_info_reset(): pulls together all the code where xen_vcpu
is set to default.

Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Ankur Arora <ankur.a.arora@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
2017-06-13 16:05:14 +02:00
Julien Grall 5d9404e118 xen: Export xen_reboot
The helper xen_reboot will be called by the EFI code in a later patch.

Note that the ARM version does not yet exist and will be added in a
later patch too.

Signed-off-by: Julien Grall <julien.grall@arm.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
2017-05-02 11:50:06 +02:00
Vitaly Kuznetsov 9963236d7c x86/xen: split suspend.c for PV and PVHVM guests
Slit the code in suspend.c into suspend_pv.c and suspend_hvm.c.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
2017-05-02 11:09:17 +02:00
Vitaly Kuznetsov 98f2a47a00 x86/xen: split off enlighten_hvm.c
Move PVHVM related code to enlighten_hvm.c. Three functions:
xen_cpuhp_setup(), xen_reboot(), xen_emergency_restart() are shared, drop
static qualifier from them. These functions will go to common code once
it is split from enlighten.c.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
2017-05-02 11:03:53 +02:00
Vitaly Kuznetsov 52519f2af0 x86/xen: globalize have_vcpu_info_placement
have_vcpu_info_placement applies to both PV and HVM and as we're going
to split the code we need to make it global.

Rename to xen_have_vcpu_info_placement.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
2017-05-02 10:50:07 +02:00
Boris Ostrovsky 063334f305 xen/x86: Remove PVH support
We are replacing existing PVH guests with new implementation.

We are keeping xen_pvh_domain() macro (for now set to zero) because
when we introduce new PVH implementation later in this series we will
reuse current PVH-specific code (xen_pvh_gnttab_setup()), and that
code is conditioned by 'if (xen_pvh_domain())'. (We will also need
a noop xen_pvh_domain() for !CONFIG_XEN_PVH).

Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2017-02-07 08:07:01 -05:00
Thomas Gleixner a5a1d1c291 clocksource: Use a plain u64 instead of cycle_t
There is no point in having an extra type for extra confusion. u64 is
unambiguous.

Conversion was done with the following coccinelle script:

@rem@
@@
-typedef u64 cycle_t;

@fix@
typedef cycle_t;
@@
-cycle_t
+u64

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: John Stultz <john.stultz@linaro.org>
2016-12-25 11:04:12 +01:00
Vitaly Kuznetsov ee42d665d3 xen/pvhvm: run xen_vcpu_setup() for the boot CPU
Historically we didn't call VCPUOP_register_vcpu_info for CPU0 for
PVHVM guests (while we had it for PV and ARM guests). This is usually
fine as we can use vcpu info in the shared_info page but when we try
booting on a vCPU with Xen's vCPU id > 31 (e.g. when we try to kdump
after crashing on this CPU) we're not able to boot.

Switch to always doing VCPUOP_register_vcpu_info for the boot CPU.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2016-07-25 13:34:23 +01:00
Boris Ostrovsky 88c15ec90f x86/paravirt: Remove the unused irq_enable_sysexit pv op
As result of commit "x86/xen: Avoid fast syscall path for Xen PV
guests", the irq_enable_sysexit pv op is not called by Xen PV guests
anymore and since they were the only ones who used it we can
safely remove it.

Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Acked-by: Andy Lutomirski <luto@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: david.vrabel@citrix.com
Cc: konrad.wilk@oracle.com
Cc: virtualization@lists.linux-foundation.org
Cc: xen-devel@lists.xenproject.org
Link: http://lkml.kernel.org/r/1447970147-1733-3-git-send-email-boris.ostrovsky@oracle.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-11-23 10:48:16 +01:00
Juergen Gross 70e6119955 xen: move p2m list if conflicting with e820 map
Check whether the hypervisor supplied p2m list is placed at a location
which is conflicting with the target E820 map. If this is the case
relocate it to a new area unused up to now and compliant to the E820
map.

As the p2m list might by huge (up to several GB) and is required to be
mapped virtually, set up a temporary mapping for the copied list.

For pvh domains just delete the p2m related information from start
info instead of reserving the p2m memory, as we don't need it at all.

For 32 bit kernels adjust the memblock_reserve() parameters in order
to cover the page tables only. This requires to memblock_reserve() the
start_info page on it's own.

Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-08-20 12:24:24 +01:00
Juergen Gross 6c2681c863 xen: add explicit memblock_reserve() calls for special pages
Some special pages containing interfaces to xen are being reserved
implicitly only today. The memblock_reserve() call to reserve them is
meant to reserve the p2m list supplied by xen. It is just reserving
not only the p2m list itself, but some more pages up to the start of
the xen built page tables.

To be able to move the p2m list to another pfn range, which is needed
for support of huge RAM, this memblock_reserve() must be split up to
cover all affected reserved pages explicitly.

The affected pages are:
- start_info page
- xenstore ring (might be missing, mfn is 0 in this case)
- console ring (not for initial domain)

Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-08-20 12:24:23 +01:00
Juergen Gross 04414baab5 xen: check pre-allocated page tables for conflict with memory map
Check whether the page tables built by the domain builder are at
memory addresses which are in conflict with the target memory map.
If this is the case just panic instead of running into problems
later.

Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-08-20 12:24:21 +01:00
Juergen Gross 9ddac5b724 xen: find unused contiguous memory area
For being able to relocate pre-allocated data areas like initrd or
p2m list it is mandatory to find a contiguous memory area which is
not yet in use and doesn't conflict with the memory map we want to
be in effect.

In case such an area is found reserve it at once as this will be
required to be done in any case.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-08-20 12:24:20 +01:00
Juergen Gross e612b4a7db xen: check memory area against e820 map
Provide a service routine to check a physical memory area against the
E820 map. The routine will return false if the complete area is RAM
according to the E820 map and true otherwise.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-08-20 12:24:20 +01:00
Linus Torvalds 6b476e1140 xen: bug fixes for 4.2-rc6
- Revert a fix from 4.2-rc5 that was causing lots of WARNING spam.
 - Fix a memory leak affecting backends in HVM guests.
 - Fix PV domU hang with certain configurations.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJVzHsAAAoJEFxbo/MsZsTR9Y0H/2j1PHt29RPcNdgGQ84AH0Wh
 tw1emL8rMcdhWQnsO7bNmywNNvRNQnU3ZJ8dzoq+5GPikNsbfQzYc7U2pIL4A+gB
 AAJsNDNzecuq4srk8vNxcmZ7ySvm9w6dccDUex2ge3sNWaq6gzSQvz6FSWiL0Sxg
 k3JcnemEg6JrYOTWdxKInAORMcRO6rgx9eIsdPUPOpgC5XLg6/mZOqBAWXIksDvs
 V9uCMqQicaUgBgKFIOSllqH6fcCNooRu3aDwNNj/2mMcJmEvMeBkHmNlQgEm2j5L
 ubdDyrC5y48TUPJm8i3+W2/AY+kgWzhThcqyVy6LRAAj5RItJFxMf0nMXzIEqlQ=
 =UgMy
 -----END PGP SIGNATURE-----

Merge tag 'for-linus-4.2-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull xen bug fixes from David Vrabel:

 - revert a fix from 4.2-rc5 that was causing lots of WARNING spam.

 - fix a memory leak affecting backends in HVM guests.

 - fix PV domU hang with certain configurations.

* tag 'for-linus-4.2-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/xenbus: Don't leak memory when unmapping the ring on HVM backend
  Revert "xen/events/fifo: Handle linked events when closing a port"
  x86/xen: build "Xen PV" APIC driver for domU as well
2015-08-13 13:36:22 -07:00
Jason A. Donenfeld fc5fee86bd x86/xen: build "Xen PV" APIC driver for domU as well
It turns out that a PV domU also requires the "Xen PV" APIC
driver. Otherwise, the flat driver is used and we get stuck in busy
loops that never exit, such as in this stack trace:

(gdb) target remote localhost:9999
Remote debugging using localhost:9999
__xapic_wait_icr_idle () at ./arch/x86/include/asm/ipi.h:56
56              while (native_apic_mem_read(APIC_ICR) & APIC_ICR_BUSY)
(gdb) bt
 #0  __xapic_wait_icr_idle () at ./arch/x86/include/asm/ipi.h:56
 #1  __default_send_IPI_shortcut (shortcut=<optimized out>,
dest=<optimized out>, vector=<optimized out>) at
./arch/x86/include/asm/ipi.h:75
 #2  apic_send_IPI_self (vector=246) at arch/x86/kernel/apic/probe_64.c:54
 #3  0xffffffff81011336 in arch_irq_work_raise () at
arch/x86/kernel/irq_work.c:47
 #4  0xffffffff8114990c in irq_work_queue (work=0xffff88000fc0e400) at
kernel/irq_work.c:100
 #5  0xffffffff8110c29d in wake_up_klogd () at kernel/printk/printk.c:2633
 #6  0xffffffff8110ca60 in vprintk_emit (facility=0, level=<optimized
out>, dict=0x0 <irq_stack_union>, dictlen=<optimized out>,
fmt=<optimized out>, args=<optimized out>)
    at kernel/printk/printk.c:1778
 #7  0xffffffff816010c8 in printk (fmt=<optimized out>) at
kernel/printk/printk.c:1868
 #8  0xffffffffc00013ea in ?? ()
 #9  0x0000000000000000 in ?? ()

Mailing-list-thread: https://lkml.org/lkml/2015/8/4/755
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-08-10 15:33:10 +01:00
Andy Lutomirski aac82d3191 x86, paravirt, xen: Remove the 64-bit ->irq_enable_sysexit() pvop
We don't use irq_enable_sysexit on 64-bit kernels any more.
Remove all the paravirt and Xen machinery to support it on
64-bit kernels.

Tested-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: Denys Vlasenko <vda.linux@googlemail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/8a03355698fe5b94194e9e7360f19f91c1b2cf1f.1428100853.git.luto@kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-04-22 08:07:45 +02:00
Juergen Gross f0feed10aa x86/xen: cleanup arch/x86/xen/setup.c
Remove extern declarations in arch/x86/xen/setup.c which are either
not used or redundant. Move needed other extern declarations to
xen-ops.h

Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2015-01-28 09:59:46 +00:00
Linus Torvalds eb64c3c6cd xen: additional features for 3.19-rc0
- Linear p2m for x86 PV guests which simplifies the p2m code, improves
   performance and will allow for > 512 GB PV guests in the future.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQEcBAABAgAGBQJUjx7OAAoJEFxbo/MsZsTRXLIH/ishF/xDCL6F5r0I0SKDuaz5
 C/BediDcFzbzh4/t3x2PrPooHk4gPmeyIg688ZGgBAxHRXC5OJ2U5tdtZ/qUCnwf
 0J1pdp/yoAOVRJT+Sax10lN4+G8YV7+6Ptikz0C7glXBAg8SgFL3Y6tfBS0jNwYR
 wQph09S9n7gMZTodSBLbb0ymtJMhl16DrETJsYV73sU7bAL5sFDVkMQvY3SxkusX
 GNFeALfqM0cSK9mDI6O9avGJKoIdKlzt7VWHdlc+yKTlQsoyg/cSH3AaihhG6af9
 IElRxwH9Z40VFLKip0gNMOIrUwAjFGSw6N+Uhik27tlmvfI3Dll/+gsMz/5sHc8=
 =OyoK
 -----END PGP SIGNATURE-----

Merge tag 'stable/for-linus-3.19-rc0b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip

Pull additional xen update from David Vrabel:
 "Xen: additional features for 3.19-rc0

   - Linear p2m for x86 PV guests which simplifies the p2m code,
     improves performance and will allow for > 512 GB PV guests in the
     future.

  A last-minute, configuration specific issue was discovered with this
  change which is why it was not included in my previous pull request.
  This is now been fixed and tested"

* tag 'stable/for-linus-3.19-rc0b-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen: switch to post-init routines in xen mmu.c earlier
  Revert "swiotlb-xen: pass dev_addr to swiotlb_tbl_unmap_single"
  xen: annotate xen_set_identity_and_remap_chunk() with __init
  xen: introduce helper functions to do safe read and write accesses
  xen: Speed up set_phys_to_machine() by using read-only mappings
  xen: switch to linear virtual mapped sparse p2m list
  xen: Hide get_phys_to_machine() to be able to tune common path
  x86: Introduce function to get pmd entry pointer
  xen: Delay invalidating extra memory
  xen: Delay m2p_override initialization
  xen: Delay remapping memory of pv-domain
  xen: use common page allocation function in p2m.c
  xen: Make functions static
  xen: fix some style issues in p2m.c
2014-12-16 13:23:03 -08:00
Juergen Gross 054954eb05 xen: switch to linear virtual mapped sparse p2m list
At start of the day the Xen hypervisor presents a contiguous mfn list
to a pv-domain. In order to support sparse memory this mfn list is
accessed via a three level p2m tree built early in the boot process.
Whenever the system needs the mfn associated with a pfn this tree is
used to find the mfn.

Instead of using a software walked tree for accessing a specific mfn
list entry this patch is creating a virtual address area for the
entire possible mfn list including memory holes. The holes are
covered by mapping a pre-defined  page consisting only of "invalid
mfn" entries. Access to a mfn entry is possible by just using the
virtual base address of the mfn list and the pfn as index into that
list. This speeds up the (hot) path of determining the mfn of a
pfn.

Kernel build on a Dell Latitude E6440 (2 cores, HT) in 64 bit Dom0
showed following improvements:

Elapsed time: 32:50 ->  32:35
System:       18:07 ->  17:47
User:        104:00 -> 103:30

Tested with following configurations:
- 64 bit dom0, 8GB RAM
- 64 bit dom0, 128 GB RAM, PCI-area above 4 GB
- 32 bit domU, 512 MB, 8 GB, 43 GB (more wouldn't work even without
                                    the patch)
- 32 bit domU, ballooning up and down
- 32 bit domU, save and restore
- 32 bit domU with PCI passthrough
- 64 bit domU, 8 GB, 2049 MB, 5000 MB
- 64 bit domU, ballooning up and down
- 64 bit domU, save and restore
- 64 bit domU with PCI passthrough

Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-12-04 14:09:15 +00:00
Juergen Gross 5b8e7d8054 xen: Delay invalidating extra memory
When the physical memory configuration is initialized the p2m entries
for not pouplated memory pages are set to "invalid". As those pages
are beyond the hypervisor built p2m list the p2m tree has to be
extended.

This patch delays processing the extra memory related p2m entries
during the boot process until some more basic memory management
functions are callable. This removes the need to create new p2m
entries until virtual memory management is available.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-12-04 14:08:59 +00:00
Juergen Gross 1f3ac86b4c xen: Delay remapping memory of pv-domain
Early in the boot process the memory layout of a pv-domain is changed
to match the E820 map (either the host one for Dom0 or the Xen one)
regarding placement of RAM and PCI holes. This requires removing memory
pages initially located at positions not suitable for RAM and adding
them later at higher addresses where no restrictions apply.

To be able to operate on the hypervisor supported p2m list until a
virtual mapped linear p2m list can be constructed, remapping must
be delayed until virtual memory management is initialized, as the
initial p2m list can't be extended unlimited at physical memory
initialization time due to it's fixed structure.

A further advantage is the reduction in complexity and code volume as
we don't have to be careful regarding memory restrictions during p2m
updates.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
2014-12-04 14:08:48 +00:00
Juergen Gross 47591df505 xen: Support Xen pv-domains using PAT
With the dynamical mapping between cache modes and pgprot values it is
now possible to use all cache modes via the Xen hypervisor PAT settings
in a pv domain.

All to be done is to read the PAT configuration MSR and set up the
translation tables accordingly.

Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stefan.bader@canonical.com
Cc: xen-devel@lists.xensource.com
Cc: ville.syrjala@linux.intel.com
Cc: jbeulich@suse.com
Cc: toshi.kani@hp.com
Cc: plagnioj@jcrosoft.com
Cc: tomi.valkeinen@ti.com
Cc: bhelgaas@google.com
Link: http://lkml.kernel.org/r/1415019724-4317-19-git-send-email-jgross@suse.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2014-11-16 11:04:26 +01:00
Linus Torvalds 76f09aa464 Merge branch 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull EFI changes from Ingo Molnar:
 "Main changes in this cycle are:

   - arm64 efi stub fixes, preservation of FP/SIMD registers across
     firmware calls, and conversion of the EFI stub code into a static
     library - Ard Biesheuvel

   - Xen EFI support - Daniel Kiper

   - Support for autoloading the efivars driver - Lee, Chun-Yi

   - Use the PE/COFF headers in the x86 EFI boot stub to request that
     the stub be loaded with CONFIG_PHYSICAL_ALIGN alignment - Michael
     Brown

   - Consolidate all the x86 EFI quirks into one file - Saurabh Tangri

   - Additional error logging in x86 EFI boot stub - Ulf Winkelvos

   - Support loading initrd above 4G in EFI boot stub - Yinghai Lu

   - EFI reboot patches for ACPI hardware reduced platforms"

* 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (31 commits)
  efi/arm64: Handle missing virtual mapping for UEFI System Table
  arch/x86/xen: Silence compiler warnings
  xen: Silence compiler warnings
  x86/efi: Request desired alignment via the PE/COFF headers
  x86/efi: Add better error logging to EFI boot stub
  efi: Autoload efivars
  efi: Update stale locking comment for struct efivars
  arch/x86: Remove efi_set_rtc_mmss()
  arch/x86: Replace plain strings with constants
  xen: Put EFI machinery in place
  xen: Define EFI related stuff
  arch/x86: Remove redundant set_bit(EFI_MEMMAP) call
  arch/x86: Remove redundant set_bit(EFI_SYSTEM_TABLES) call
  efi: Introduce EFI_PARAVIRT flag
  arch/x86: Do not access EFI memory map if it is not available
  efi: Use early_mem*() instead of early_io*()
  arch/ia64: Define early_memunmap()
  x86/reboot: Add EFI reboot quirk for ACPI Hardware Reduced flag
  efi/reboot: Allow powering off machines using EFI
  efi/reboot: Add generic wrapper around EfiResetSystem()
  ...
2014-08-04 17:13:50 -07:00
Daniel Kiper c7341d6a61 arch/x86/xen: Silence compiler warnings
Compiler complains in the following way when x86 32-bit kernel
with Xen support is build:

  CC      arch/x86/xen/enlighten.o
arch/x86/xen/enlighten.c: In function ‘xen_start_kernel’:
arch/x86/xen/enlighten.c:1726:3: warning: right shift count >= width of type [enabled by default]

Such line contains following EFI initialization code:

boot_params.efi_info.efi_systab_hi = (__u32)(__pa(efi_systab_xen) >> 32);

There is no issue if x86 64-bit kernel is build. However, 32-bit case
generate warning (even if that code will not be executed because Xen
does not work on 32-bit EFI platforms) due to __pa() returning unsigned long
type which has 32-bits width. So move whole EFI initialization stuff
to separate function and build it conditionally to avoid above mentioned
warning on x86 32-bit architecture.

Signed-off-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
2014-07-18 21:24:03 +01:00
David Vrabel abacaadc41 x86/xen: fix memory setup for PVH dom0
Since af06d66ee32b (x86: fix setup of PVH Dom0 memory map) in Xen, PVH
dom0 need only use the memory memory provided by Xen which has already
setup all the correct holes.

xen_memory_setup() then ends up being trivial for a PVH guest so
introduce a new function (xen_auto_xlated_memory_setup()).

Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Tested-by: Roger Pau Monné <roger.pau@citrix.com>
2014-06-05 14:22:27 +01:00