Граф коммитов

17 Коммитов

Автор SHA1 Сообщение Дата
David Teigland 60f98d1839 dlm: add recovery callbacks
These new callbacks notify the dlm user about lock recovery.
GFS2, and possibly others, need to be aware of when the dlm
will be doing lock recovery for a failed lockspace member.

In the past, this coordination has been done between dlm and
file system daemons in userspace, which then direct their
kernel counterparts.  These callbacks allow the same
coordination directly, and more simply.

Signed-off-by: David Teigland <teigland@redhat.com>
2012-01-04 08:56:31 -06:00
David Teigland f95a34c665 dlm: move recovery barrier calls
Put all the calls to recovery barriers in the same function
to clarify where they each happen.  Should not change any behavior.
Also modify some recovery debug lines to make them consistent.

Signed-off-by: David Teigland <teigland@redhat.com>
2012-01-04 08:53:27 -06:00
David Teigland 23e8e1aaac dlm: use workqueue for callbacks
Instead of creating our own kthread (dlm_astd) to deliver
callbacks for all lockspaces, use a per-lockspace workqueue
to deliver the callbacks.  This eliminates complications and
slowdowns from many lockspaces sharing the same thread.

Signed-off-by: David Teigland <teigland@redhat.com>
2011-07-15 12:30:43 -05:00
David Teigland d44e0fc704 dlm: recover nodes that are removed and re-added
If a node is removed from a lockspace, and then added back before the
dlm is notified of the removal, the dlm will not detect the removal
and won't clear the old state from the node.  This is fixed by using a
list of added nodes so the membership recovery can detect when a newly
added node is already in the member list.

Signed-off-by: David Teigland <teigland@redhat.com>
2008-04-21 11:18:01 -05:00
David Teigland 85f0379aa0 dlm: keep cached master rsbs during recovery
To prevent the master of an rsb from changing rapidly, an unused rsb is kept
on the "toss list" for a period of time to be reused.  The toss list was
being cleared completely for each recovery, which is unnecessary.  Much of
the benefit of the toss list can be maintained if nodes keep rsb's in their
toss list that they are the master of.  These rsb's need to be included
when the resource directory is rebuilt during recovery.

Signed-off-by: David Teigland <teigland@redhat.com>
2008-01-30 11:04:43 -06:00
David Teigland c36258b592 [DLM] block dlm_recv in recovery transition
Introduce a per-lockspace rwsem that's held in read mode by dlm_recv
threads while working in the dlm.  This allows dlm_recv activity to be
suspended when the lockspace transitions to, from and between recovery
cycles.

The specific bug prompting this change is one where an in-progress
recovery cycle is aborted by a new recovery cycle.  While dlm_recv was
processing a recovery message, the recovery cycle was aborted and
dlm_recoverd began cleaning up.  dlm_recv decremented recover_locks_count
on an rsb after dlm_recoverd had reset it to zero.  This is fixed by
suspending dlm_recv (taking write lock on the rwsem) before aborting the
current recovery.

The transitions to/from normal and recovery modes are simplified by using
this new ability to block dlm_recv.  The switch from normal to recovery
mode means dlm_recv goes from processing locking messages, to saving them
for later, and vice versa.  Races are avoided by blocking dlm_recv when
setting the flag that switches between modes.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-10-10 08:56:38 +01:00
David Teigland 3ae1acf93a [DLM] add lock timeouts and warnings [2/6]
New features: lock timeouts and time warnings.  If the DLM_LKF_TIMEOUT
flag is set, then the request/conversion will be canceled after waiting
the specified number of centiseconds (specified per lock).  This feature
is only available for locks requested through libdlm (can be enabled for
kernel dlm users if there's a use for it.)

If the new DLM_LSFL_TIMEWARN flag is set when creating the lockspace, then
a warning message will be sent to userspace (using genetlink) after a
request/conversion has been waiting for a given number of centiseconds
(configurable per node).  The time warnings will be used in the future
to do deadlock detection in userspace.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-07-09 08:22:33 +01:00
David Teigland 8ec6886748 [DLM] change some log_error to log_debug
Some common, non-error messages should use log_debug instead of log_error
so they can be turned off.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2007-02-05 13:36:34 -05:00
Ryusuke Konishi 57adf7eede [DLM] fix format warnings in rcom.c and recoverd.c
This fixes the following gcc warnings generated on
the architectures where uint64_t != unsigned long long (e.g. ppc64).

fs/dlm/rcom.c:154: warning: format '%llx' expects type 'long long unsigned int', but argument 4 has type 'uint64_t'
fs/dlm/rcom.c:154: warning: format '%llx' expects type 'long long unsigned int', but argument 5 has type 'uint64_t'
fs/dlm/recoverd.c:48: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'uint64_t'
fs/dlm/recoverd.c:202: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'uint64_t'
fs/dlm/recoverd.c:210: warning: format '%llx' expects type 'long long unsigned int', but argument 3 has type 'uint64_t'

Signed-off-by: Ryusuke Konishi <ryusuke@osrg.net>
Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30 10:37:22 -05:00
David Teigland 2896ee37cc [DLM] fix add_requestqueue checking nodes list
Requests that arrive after recovery has started are saved in the
requestqueue and processed after recovery is done.  Some of these requests
are purged during recovery if they are from nodes that have been removed.
We move the purging of the requests (dlm_purge_requestqueue) to later in
the recovery sequence which allows the routine saving requests
(dlm_add_requestqueue) to avoid filtering out requests by nodeid since the
same will be done by the purge.  The current code has add_requestqueue
filtering by nodeid but doesn't hold any locks when accessing the list of
current nodes.  This also means that we need to call the purge routine
when the lockspace is being shut down since the add routine will not be
rejecting requests itself any more.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30 10:37:00 -05:00
David Teigland 4b77f2c93d [DLM] do full recover_locks barrier
Red Hat BZ 211914

The previous patch "[DLM] fix aborted recovery during
node removal" was incomplete as discovered with further testing.  It set
the bit for the RS_LOCKS barrier but did not then wait for the barrier.
This is often ok, but sometimes it will cause yet another recovery hang.
If it's a new node that also has the lowest nodeid that skips the barrier
wait, then it misses the important step of collecting and reporting the
barrier status from the other nodes (which is the job of the low nodeid in
the barrier wait routine).

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30 10:35:24 -05:00
David Teigland 2cdc98aaf0 [DLM] fix stopping unstarted recovery
Red Hat BZ 211914

When many nodes are joining a lockspace simultaneously, the dlm gets a
quick sequence of stop/start events, a pair for adding each node.
dlm_controld in user space sends dlm_recoverd in the kernel each stop and
start event.  dlm_controld will sometimes send the stop before
dlm_recoverd has had a chance to take up the previously queued start.  The
stop aborts the processing of the previous start by setting the
RECOVERY_STOP flag.  dlm_recoverd is erroneously clearing this flag and
ignoring the stop/abort if it happens to take up the start after the stop
meant to abort it.  The fix is to check the sequence number that's
incremented for each stop/start before clearing the flag.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30 10:35:16 -05:00
David Teigland 91c0dc93a1 [DLM] fix aborted recovery during node removal
Red Hat BZ 211914

With the new cluster infrastructure, dlm recovery for a node removal can
be aborted and restarted for a node addition.  When this happens, the
restarted recovery isn't aware that it's doing recovery for the earlier
removal as well as the addition.  So, it then skips the recovery steps
only required when nodes are removed.  This can result in locks not being
purged for failed/removed nodes.  The fix is to check for removed nodes
for which recovery has not been completed at the start of a new recovery
sequence.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-11-30 10:35:13 -05:00
David Teigland 5f88f1ea16 [DLM] add new lockspace to list ealier
When a new lockspace was being created, the recoverd thread was being
started for it before the lockspace was added to the global list of
lockspaces.  The new thread was looking up the lockspace in the global
list and sometimes not finding it due to the race with the original thread
adding it to the list.  We need to add the lockspace to the global list
before starting the thread instead of after, and if the new thread can't
find the lockspace for some reason, it should return an error.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-08-25 10:02:53 -04:00
David Teigland f6db1b8e72 [DLM] abort recovery more quickly
When we abort one recovery to do another, break out of the ping_members()
routine more quickly, and wake up the dlm_recoverd thread more quickly
instead of waiting for it to time out.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2006-08-09 09:45:31 -04:00
David Teigland 901359256b [DLM] Update DLM to the latest patch level
Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steve Whitehouse <swhiteho@redhat.com>
2006-01-20 08:47:07 +00:00
David Teigland e7fd41792f [DLM] The core of the DLM for GFS2/CLVM
This is the core of the distributed lock manager which is required
to use GFS2 as a cluster filesystem. It is also used by CLVM and
can be used as a standalone lock manager independantly of either
of these two projects.

It implements VAX-style locking modes.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steve Whitehouse <swhiteho@redhat.com>
2006-01-18 09:30:29 +00:00