devm_reset_control_array_get_exclusive() looks more readable
Signed-off-by: Yejune Deng <yejune.deng@gmail.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/1605667700-16681-1-git-send-email-yejune.deng@gmail.com
if of_find_device_by_node() succeed, meson_canvas_get() doesn't have
a corresponding put_device(). Thus add put_device() to fix the exception
handling for this function implementation.
Fixes: 382f8be045 ("soc: amlogic: canvas: Fix meson_canvas_get when probe failed")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20201117011322.522477-1-yukuai3@huawei.com
The MX driver only supports 32-bit ARM SoCs and the GX driver only
supports 64-bit SoCs. Only build for the right architecture.
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Rather than use a governor to keep these domains always-on, instead
use the flag GENPD_FLAG_ALWAYS_ON. This has the same effect, but with
much lower overhead since the governor path is not used at all.
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200921222135.7145-1-khilman@baylibre.com
The Power Controller in the Amlogic AXG SoCs is similar to the GXL one
but with less VPU memory domains to enable and a supplementary Audio
memory power domain.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20200917064702.1459-3-narmstrong@baylibre.com
Add support for the Meson GX SoCs to the meson-ee-pwrc driver.
The power domains on the GX SoCs are very similar to G12A. The only
known differences so far are:
- The GX SoCs do not have the HHI_VPU_MEM_PD_REG2 register (for the
VPU power-domain)
- The GX SoCs have an additional reset line called "dvin"
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20200515204709.1505498-5-martin.blumenstingl@googlemail.com
This adds support for the power domains on Meson8/Meson8b/Meson8m2.
Meson8 doesn't use any reset lines while Meson8b and Meson8m2 use the
same set of reset lines (which is different from the newer SoCs).
Add dedicated compatible strings for Meson8, Meson8b and Meson8m2 to
support these differences.
Notable differences between Meson8 and G12A are:
- there is no HHI_VPU_MEM_PD_REG2 on the 32-bit SoCs
- the Meson8b datasheet describes an "audio DSP memory" power domain
which is used for the hardware audio decoder
- the "amlogic,ao-sysctrl" only includes the power management related
registers on the 32-bit SoCs, meaning the for example the
AO_RTI_GEN_PWR_SLEEP0 register is at offset (0x2 << 2) rather than
(0x3a << 2). As result of this (0x38 << 2) is subtracted from the
register offsets, which is the start of the power management related
registers.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200515204709.1505498-4-martin.blumenstingl@googlemail.com
When MESON_SECURE_PM_DOMAINS & !MESON_SM, there will be compile failure:
.../meson-secure-pwrc.o: In function `meson_secure_pwrc_on':
.../meson-secure-pwrc.c:76: undefined reference to `meson_sm_call'
Fix this by adding depends on MESON_SM for MESON_SECURE_PM_DOMAINS.
Fixes: b3dde5013e ("soc: amlogic: Add support for Secure power domains controller")
Reported-by: Stephen Rothwell<sfr@canb.auug.org.au>
Reported-by: patchwork-bot+linux-amlogic<patchwork-bot+linux-amlogic@kernel.org>
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Stephen Rothwell<sfr@canb.auug.org.au>
Link: https://lore.kernel.org/r/1581955933-69832-1-git-send-email-jianxin.pan@amlogic.com
Add support for the Amlogic Secure Power controller. In A1/C1 series, power
control registers are in secure domain, and should be accessed by smc.
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/1579087831-94965-4-git-send-email-jianxin.pan@amlogic.com
pm_genpd_init() can return an error. Propagate the error code to prevent
the driver from indicating that it successfully probed while there were
errors during pm_genpd_init().
Fixes: eef3c2ba0a ("soc: amlogic: Add support for Everything-Else power domains controller")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
of_genpd_add_provider_onecell() can return an error. Propagate the error
so the driver registration fails when of_genpd_add_provider_onecell()
did not work.
Fixes: eef3c2ba0a ("soc: amlogic: Add support for Everything-Else power domains controller")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Chip on the board is S905D3 not S905X3:
[ 0.098998] soc soc0: Amlogic Meson SM1 (S905D3) Revision 2b:c (b0:2) Detected
Change from v1: use 0xf0 mask instead of 0xf2 as advised by Neil Armstrong.
Fixes: 1d7c541b8a ("soc: amlogic: meson-gx-socinfo: Add S905X3 ID for VIM3L")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
VIM3L appears to use a different ID:
[ 0.086470] soc soc0: Amlogic Meson SM1 (S905X3) Revision 2b:c (b0:2) Detected
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add the SoC IDs for the A113L Amlogic A1 SoC.
Signed-off-by: Jianxin Pan <jianxin.pan@amlogic.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add support for the General Purpose Amlogic Everything-Else Power controller,
with the first support for G12A and SM1 SoCs dedicated to the VPU, PCIe,
USB, NNA, GE2D and Ethernet Power Domains.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The variable np in function meson_gx_socinfo_init takes the return value
of of_find_compatible_node, which gets a node but does not put it. If
this node is not put it may cause a memory leak. Hence put np after its
usefulness has been exhausted.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Fixes: a9daaba296 ("soc: Add Amlogic SoC Information driver")
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add the clk-measurer clocks IDs for the Amlogic SM1 SoC family.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add the SoC IDs for the S905X3 Amlogic SM1 SoC.
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add the SoC ID for the A311D Amlogic SoC.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add the G12B second CPU cluster CPU and SYS_PLL measure IDs.
These IDs returns 0Hz on G12A.
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
In order to protect clock measuring when multiple process asks for
a measure, protect the main measure function with mutexes.
Reviewed-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
- canvas: add support for Meson8*
-----BEGIN PGP SIGNATURE-----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=NrZO
-----END PGP SIGNATURE-----
Merge tag 'amlogic-drivers' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic into arm/drivers
soc: Amlogic driver updates for v5.3
- canvas: add support for Meson8*
* tag 'amlogic-drivers' of https://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-amlogic:
soc: amlogic: canvas: add support for Meson8, Meson8b and Meson8m2
dt-bindings: soc: amlogic: canvas: document support for Meson8/8b/8m2
Signed-off-by: Olof Johansson <olof@lixom.net>
The canvas IP on Meson8, Meson8b and Meson8m2 is mostly identical to the
one on GXBB and newer. The only known difference so far is that that the
"endianness" bits are not supported on Meson8m2 and earlier.
Add new compatible strings and a check in meson_canvas_config() to
validate that the endianness bits cannot be configured on the 32-bit
SoCs.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Maxime Jourdan <mjourdan@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Amlogic G12A SoC has a very similar VPU Power Controller setup
than the older GXBB, GXL & GXm SoCs.
This patch adds the variant support for G12A.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The register bitmask to power on/off the VPU memories was incorectly set
to 0x2 instead of 0x3. While still working, let's use the recommended
vendor value instead.
Fixes: 75fcb5ca4b ("soc: amlogic: add Meson GX VPU Domains driver")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add an of_node_put when a tested device node is not available.
The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):
// <smpl>
@@
identifier f;
local idexpression e;
expression x;
@@
e = f(...);
... when != of_node_put(e)
when != x = e
when != e = x
when any
if (<+...of_device_is_available(e)...+>) {
... when != of_node_put(e)
(
return e;
|
+ of_node_put(e);
return ...;
)
}
// </smpl>
Fixes: a9daaba296 ("soc: Add Amlogic SoC Information driver")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This adds the:
- G12A SoC ID and S905X2, S905D2 package IDs, found booting the
X96 Max and U200 Reference Board
- G12B SoC ID and S922X package ID, found booting the Odroid-N2
- S805X, S805Y package IDs found in the vendor U-Boot source
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
When updated IDs on f842c41adc ("amlogic: meson-gx-socinfo: Update soc ids")
we introduced packages ids using the full 8bit value, but in the function
socinfo_to_package_id() the id was filtered with the 0xf0 mask.
While the 0xf0 mask is valid for most board, it filters out the lower
4 bits which encodes some characteristics of the chip.
This patch moves the mask into the meson_gx_package_id table to be applied
on each package name independently and add the correct mask for some
specific entries.
An example is the S905, in the vendor code the S905 is package_id
different from 0x20, and S905M is exactly 0x20.
Another example are the The Wetek Hub & Play2 boards using a S905-H
variant, which is the S905 SoC with some licence bits enabled.
These licence bits are encoded in the lower 4bits, so to detect
the -H variant, we must detect the id == 0x3 with the 0xf mask.
Fixes: f842c41adc ("amlogic: meson-gx-socinfo: Update soc ids")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Add support for the axg and g12a SoC family in amlogic clk measure
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
[khilman: squashed some fixups from Martin]
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
When probe fails, a platforn_device is still associated to the node,
but dev_get_drvdata() returns NULL.
Handle this case by returning a consistent error.
Fixes: d4983983d9 ("soc: amlogic: add meson-canvas driver")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Maxime Jourdan <mjourdan@baylibre.com>
[khilman: fixed minor typo in comment ]
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The call to of_parse_phandle returns a node pointer with refcount
incremented thus it must be explicitly decremented here after the last
usage.
Signed-off-by: Wen Yang <yellowriver2010@hotmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Fixes: d4983983d9 ("soc: amlogic: add meson-canvas driver")
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
This patchs adds a missing dependency on REGMAP_MMIO.
This cause the following build failure on SPARC:
drivers/soc/amlogic/meson-clk-measure.o: In function `meson_msr_probe':
meson-clk-measure.c:(.text+0xc4): undefined reference to `__devm_regmap_init_mmio_clk'
Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The Amlogic Meson SoCs embeds a clock measurer IP to measure the internal
clock paths frequencies.
The precision is determined by stepping into the duration until the counter
overflows.
The debugfs slows a pretty summary and each clock can be measured
individually aswell.
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Amlogic SoCs have a repository of 256 canvas which they use to
describe pixel buffers.
They contain metadata like width, height, block mode, endianness [..]
Many IPs within those SoCs like vdec/vpu rely on those canvas to read/write
pixels.
Reviewed-by: Jerome Brunet <jbrunet@baylibre.com>
Tested-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Maxime Jourdan <mjourdan@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Updates the Amlogic Meson SoCs IDs for the Armv8 based SoCs.
It includes the new families and packages.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Fixes the following sparse warnings:
drivers/soc/amlogic/meson-gx-socinfo.c💯12: warning:
symbol 'meson_gx_socinfo_init' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Fixes the following sparse warnings:
drivers/soc/amlogic/meson-mx-socinfo.c:107:12: warning:
symbol 'meson_mx_socinfo_init' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
When operating the system headless headless, the domain is never
powered on, leaving the clocks disabled. The shutdown function then
tries to disable the already disabled clocks, resulting in errors.
Therefore call meson_gx_pwrc_vpu_power_off() only if domain is
powered on.
This patch fixes the described issue on my system (Odorid-C2).
Fixes: 339cd0ea08 "soc: amlogic: meson-gx-pwrc-vpu: fix power-off when powered by bootloader"
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
The error message may be misleading in case of probe deferral
(happens on my Odroid-C2). Therefore don't print it in this case.
Fixes: 75fcb5ca4b "soc: amlogic: add Meson GX VPU Domains driver"
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
I've noticed the following message while booting a S905X based board:
soc soc0: Amlogic Meson GXL (S905D) Revision 21:82 (b:2) Detected
The S905D string is obviously wrong. The vendor code does:
...
ver = (readl(assist_hw_rev) >> 8) & 0xff;
meson_cpu_version[MESON_CPU_VERSION_LVL_MINOR] = ver;
ver = (readl(assist_hw_rev) >> 16) & 0xff;
meson_cpu_version[MESON_CPU_VERSION_LVL_PACK] = ver;
...
while the current code does:
...
...
This means that the current mainline code has package id and minor
version reversed.
Fixes: a9daaba296 ("soc: Add Amlogic SoC Information driver")
Signed-off-by: Arnaud Patard <apatard@hupstream.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
In the case the VPU power domain has been powered on by the bootloader
and no driver are attached to this power domain, the genpd will power it
off after a certain amount of time, but the clocks hasn't been enabled
by the kernel itself and the power-off will trigger some faults.
This patch enable the clocks to have a coherent state for an eventual
poweroff and switches to the pm_domain_always_on_gov governor.
Fixes: 75fcb5ca4b ("soc: amlogic: add Meson GX VPU Domains driver")
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The new driver introduces harmless warnings:
warning: (PM_RMOBILE && ARCH_RCAR_GEN1 && ARCH_RCAR_GEN2 && ARCH_R7S72100 && MESON_GX_PM_DOMAINS) selects PM_GENERIC_DOMAINS which has unmet direct dependencies (PM)
warning: (MESON_GX_PM_DOMAINS) selects PM_GENERIC_DOMAINS_OF which has unmet direct dependencies (PM_GENERIC_DOMAINS && OF)
This adds CONFIG_OF and CONFIG_PM dependencies to ensure it
will only be enabled in valid configurations.
Fixes: 75fcb5ca4b ("soc: amlogic: add Meson GX VPU Domains driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The Video Processing Unit needs a specific Power Domain powering scheme
this driver handles this as a PM Power Domain driver.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Amlogic SoCs have an information register which contains the SoC type
and revision information.
This patchs adds support for decoding those registers and exposing the
resulting information via the SoC bus infrastructure.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Amlogic SoCs have a SoC information register for SoC type, package type and
revision information.
This patchs adds support for this register decoding and exposing with the
SoC bus infrastructure.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Yejune Deng
Yu Kuai
Kevin Hilman
Neil Armstrong
Christian Hewitt
Martin Blumenstingl
Jianxin Pan
Nishka Dasgupta
Olof Johansson
Thomas Gleixner
Julia Lawall
Jerome Brunet
wen yang
Corentin Labbe
Maxime Jourdan
weiyongjun (A)
Heiner Kallweit
Arnaud Patard
Arnd Bergmann