dma_direct_set_offset has been moved from dma-mapping.h to
dma-map-ops.h, but our driver hasn't been updated resulting in a build
breakage. Let's change the header to fix the build.
Fixes: 16fee29b07 ("dma-mapping: remove the dma_direct_set_offset export")
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20201124103546.839711-1-maxime@cerno.tech'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
So far most of the drivers with the MBUS quirks had to duplicate the
code to deal with DT compatibility and enforcing the DMA offsets.
Let's move for a more maintainable solution by putting everything in a
notifier that would take care of setting up the DMA offsets for all the
MBUS devices.
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Eliminate the following coccicheck warning:
drivers/soc/sunxi/sunxi_sram.c:197:2-3: Unneeded semicolon
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200910140546.1191280-1-yanaijie@huawei.com
Add SPDX license identifiers to all Make/Kconfig files which:
- Have no license information of any form
These files fall under the project license, GPL v2 only. The resulting SPDX
license identifier is:
GPL-2.0-only
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When enabling ARCH_SUNXI from allnoconfig, SUNXI_SRAM is enabled, but
not REGMAP_MMIO, so the kernel fails to link with an undefined reference
to __devm_regmap_init_mmio_clk. Select REGMAP_MMIO, as suggested in
drivers/base/regmap/Kconfig.
This creates the following dependency loop:
drivers/of/Kconfig:68: symbol OF_IRQ depends on IRQ_DOMAIN
kernel/irq/Kconfig:63: symbol IRQ_DOMAIN is selected by REGMAP
drivers/base/regmap/Kconfig:7: symbol REGMAP default is visible depending on REGMAP_MMIO
drivers/base/regmap/Kconfig:39: symbol REGMAP_MMIO is selected by SUNXI_SRAM
drivers/soc/sunxi/Kconfig:4: symbol SUNXI_SRAM is selected by USB_MUSB_SUNXI
drivers/usb/musb/Kconfig:63: symbol USB_MUSB_SUNXI depends on GENERIC_PHY
drivers/phy/Kconfig:7: symbol GENERIC_PHY is selected by PHY_BCM_NS_USB3
drivers/phy/broadcom/Kconfig:29: symbol PHY_BCM_NS_USB3 depends on MDIO_BUS
drivers/net/phy/Kconfig:12: symbol MDIO_BUS default is visible depending on PHYLIB
drivers/net/phy/Kconfig:181: symbol PHYLIB is selected by ARC_EMAC_CORE
drivers/net/ethernet/arc/Kconfig:18: symbol ARC_EMAC_CORE is selected by ARC_EMAC
drivers/net/ethernet/arc/Kconfig:24: symbol ARC_EMAC depends on OF_IRQ
To fix the circular dependency, make USB_MUSB_SUNXI select GENERIC_PHY
instead of depending on it. This matches the use of GENERIC_PHY by all
but two other drivers.
Cc: <stable@vger.kernel.org> # 4.19
Fixes: 5828729beb ("soc: sunxi: export a regmap for EMAC clock reg on A64")
Signed-off-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds the H5 SoC compatible to the list of device-tree matches for
the SRAM driver. Since the variant is the same as the A64 (that precedes
the H5), the same variant description is used.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Just like the A64 and H5, the H3 SoC uses the system control block
to enable the EMAC clock.
Add a variant structure definition for the H3 and use it over the A10
one. This will allow using the H3-specific binding for the syscon node
attached to the EMAC instead of the generic syscon binding.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Use DEFINE_SHOW_ATTRIBUTE macro to simplify the code.
Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The A13, A23 and H3 have variations of the system controls, in part due to
the SRAM that are available (and can be mapped) in the SoC.
In order to make it future proof, let's add compatibles for these SoCs in
the driver.
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
This introduces support for the SRAM C1 section, that is controlled by
the system controller. This SRAM area can be muxed either to the CPU
or the Video Engine, that needs this area to store various tables (e.g.
the Huffman VLD decoding tables).
This only supports devices with the same layout as the A10 (which also
includes the A13, A20, A33 and other SoCs).
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
This binds the new A10 system-control compatible to the associated
driver, with the same driver data as the previous compatible.
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com>
Signed-off-by: Maxime Ripard <maxime.ripard@bootlin.com>
The SRAM mapping controls on Allwinner SoCs is located in a block called
"System Controls". This block also has registers for identifying the SoC,
reading the state of an external boot-related pin, and on some newer SoCs,
glue layer controls for the EMAC Ethernet controller.
The A64 variant compatible is renamed to "allwinner,a64-system-control"
to reflect this. The old A64 compatible is deprecated. So far we haven't
seen any actual use of it.
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
The A64 SRAM controller memory zone has a EMAC clock register, which is
needed by the Ethernet MAC driver (dwmac-sun8i).
Export a regmap for this register on A64.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
[wens@csie.org: export whole address range with only EMAC register
accessible and drop regmap name]
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Allwinner A64's display engine claims the SRAM C section to work.
Add support for the A64 SRAM controller and the SRAM C section of it.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
On some Allwinner SoCs, sometimes the value needed to write into the
register to claim SRAM is not equal to the value specified in the
device tree.
The device tree binding defines 0 as "mapped to CPU" and 1 as "mapped
to X device". This matches the value written to the configuration
register for the SRAM blocks currently supported. However, the not yet
supported VE SRAM block is claimed for the device by writing 0x7fffffff,
which is vastly different from the other blocks. On the A64, SRAM C is
claimed by the device by writing a 0, which is the opposite of the
current design.
Add a value remapping in sunxi_sram_func structure, and let the
sunxi_sram_of_parse function set the remapped register value.
This allows us to keep the convention currently used in the device tree
binding.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
[wens@csie.org: Clarified commit message]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
When claiming SRAM, if the base is set to an error, it means that the
SRAM controller has been probed, but failed to remap the controller
memory zone. If the base is zero, thus the SRAM controller should be not
probed at all, and it should return -EPROBE_DEFER. However, currently we
returned -EPROBE_DEFER in the former situation, and ignored the latter
situation (which will lead to the kernel to panic).
Fix the behavior on abnormal base address processing when claiming.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Fixes: 4af34b572a ("drivers: soc: sunxi: Introduce SoC driver to map
SRAMs")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
GENMASK is inclusive on both ends, therefor one has to be
subtracted from the width.
Also fixes the mask for debug output.
Signed-off-by: Jens Kuske <jenskuske@gmail.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
The Allwinner SoCs have a handful of SRAM that can be either mapped to be
accessible by devices or the CPU.
That mapping is controlled by an SRAM controller, and that mapping might
not be set by the bootloader, for example if the device wasn't used at all,
or if we're using solutions like the U-Boot's Falcon Boot.
We could also imagine changing this at runtime for example to change the
mapping of these SRAMs to use them for suspend/resume or runtime memory
rate change, if that ever happens.
These use cases require some API in the kernel to control that mapping,
exported through a drivers/soc driver.
This driver also implement a debugfs file that shows the SRAM found in the
system, the current mapping and the SRAM that have been claimed by some
drivers in the kernel.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Tested-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Maxime Ripard
Jason Yan
Thomas Gleixner
Samuel Holland
Paul Kocialkowski
Yangtao Li
Maxime Ripard
Chen-Yu Tsai
Icenowy Zheng
Jens Kuske
Maxime Ripard