For addressing the regression on Pioneer devices, we recently
corrected the quirk code to enable the implicit feedback mode on those
devices properly. However, the devices still showed problems with the
full duplex operations with JACK, and after debug sessions, we figured
out that the older kernels that had worked with JACK also didn't use
the implicit feedback mode at all although they had the quirk code to
enable it; instead, the old code worked just to skip the normal sync
endpoint setup that would have been detected without it. IOW, what
broke without the implicit-fb quirk in the past was the application of
the normal sync endpoint that is actually the capture data endpoint on
these devices.
This patch covers the overseen piece: it modifies the quirk code again
not to enable the implicit feedback mode but just to make the driver
skipping the sync endpoint detection. This made the driver working
with JACK full-duplex mode again.
Still it's not quite clear why the implicit feedback doesn't work on
those devices yet; maybe it's about some issues in the URB setup. But
at least, with this patch, the driver should work in the level of the
older kernels again.
Fixes: 167c9dc84e ("ALSA: usb-audio: Fix implicit feedback sync setup for Pioneer devices")
Link: https://lore.kernel.org/r/20210118075816.25068-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Pioneer devices have both playback and capture streams sharing the
same iface/altsetting, and those need to be paired as implicit
feedback. Instead of a half-baked (and broken) static quirk entry,
set up more generically for those devices by checking the number of
endpoints and the attribute of the secondary EP.
Fixes: bf6313a0ff ("ALSA: usb-audio: Refactor endpoint management")
Reported-by: František Kučera <konference@frantovo.cz>
Link: https://lore.kernel.org/r/20210108075219.21463-6-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The implicit feedback mode needs to handle two endpoints and the
choice of the audioformat object for the sync EP is important since
this determines the compatibility of the hw_params. The current code
uses the same audioformat object if both the main EP and the sync EP
point to the same iface/altsetting. This was done in consideration of
the non-implicit-fb sync EP handling, and it doesn't match well with
the cases where actually to endpoints are defined in the sameiface /
altsetting like a few Pioneer devices.
Modify snd_usb_find_implicit_fb_sync_format() to pick up the
audioformat that is assigned in the counter-part substreams primarily,
so that the actual capture stream can be opened properly. We keep the
same audioformat object only as a fallback in case nothing found,
though.
Fixes: 9fddc15e80 ("ALSA: usb-audio: Factor out the implicit feedback quirk code")
Link: https://lore.kernel.org/r/20210108075219.21463-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
BOSS RC-505 (shown by lsusb as "Roland Corp. RC-505") does require the
same quirk as these other BOSS devices.
Without this quirk it is neither possible to capture audio from nor to
write audio to the RC-505. Both just result in an empty audio
stream. With these changes both capture and playback seem to work
quite fine. MIDI funtionality was not tested.
Tested-by: Harry Reinold <harry.reinold@posteo.de>
Signed-off-by: Timon Reinold <tirei@agon.one>
Link: https://lore.kernel.org/r/20210102210835.21268-1-tirei@agon.one
Signed-off-by: Takashi Iwai <tiwai@suse.de>
BOSS AD-10 requires the very same quirk like other BOSS devices to
enable the special implicit feedback mode.
Reported-and-tested-by: Martin Passing <martin@passing.name>
Link: https://lore.kernel.org/r/20201229083428.20467-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The BOSS GT-1 (USB ID 0582:01d6) requires implicit feedback
like other similar BOSS devices. This patch adds this support.
[ rearranged the table entry in the ID order -- tiwai ]
Signed-off-by: Mike Oliphant <oliphant@nostatic.org>
Link: https://lore.kernel.org/r/20201221215533.2511-1-oliphant@nostatic.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Steinberg UR22 (with USB ID 0499:1509) requires the implicit feedback
for the proper playback, otherwise it causes occasional cracks.
This patch adds the corresponding the quirk table entry with the
recently added generic implicit fb support.
Reported-and-tested-by: Kilian <meschi@posteo.de>
Link: https://lore.kernel.org/r/20201209161835.13625-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Now that the usb audio driver correctly finds implicit feedback endpoints,
the implicit feedback quirk for the MOTU M-Series is no longer required.
This also removes some unnecessary vendor specific messages from the MOTU
M-Series boot quirk. The removed vendor specific messages turned on vendor
specific interrupts to the host every 32 samples. The only thing the boot
quirk needs to do is wait for 2 seconds.
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Signed-off-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-42-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A few other BOSS devices (BR-80, GT-100v2, Katana) seem requiring the
same quirk as BOSS GT-001, i.e. no implicit feedback for playback but
tying with capture. Add and correct the corresponding quirk table
entries for them.
Reported-and-tested-by: Keith Milner <kamilner@superlative.org>
Link: https://lore.kernel.org/r/20201123085347.19667-41-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A new module option, implicit_fb, is added to specify the driver
looking for the implicit feedback sync. This can be useful for a
device that could be working better in the implicit feed back mode and
user wants to test it quickly. When this works, we can add the quirk
entry easily.
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-40-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch extends the implicit feedback mode parser code to check the
description more generically, so that the quirk entries can be added
without the explicit EP and interface numbers. The search is done for
the next and the previous interface of the given altset, and if both
entries are ASYNC mode and the direction matches, it just takes as the
sync endpoint. The generic parser is applicable only for the playback
stream.
As of now, only a few M-Audio devices have been converted to use this
mode.
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-39-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The code dealing with the implicit feedback mode grew recently, and
it's becoming messy. As we receive more and more devices that need
the similar handling, it's better to be processed through a table
instead of the open code.
This patch moves the code that is relevant with parsing the implicit
feedback mode and some helpers into another file, implicit.c. The
detection and the setup of the implicit feedback sync EPs are
rewritten to use the ID/class matching table instead.
There should be no functional changes.
Tested-by: Keith Milner <kamilner@superlative.org>
Tested-by: Dylan Robinson <dylan_robinson@motu.com>
Link: https://lore.kernel.org/r/20201123085347.19667-38-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai
Timon Reinold
Mike Oliphant
Dylan Robinson