check_conf() never increments conf_cnt for listnewconfig, so conf_cnt
is always zero.
In other words, conf_cnt is not zero, "input_mode != listnewconfig"
is met.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
conf() is never called for listnewconfig / olddefconfig.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
check_conf() traverses the menu tree, but it is completely no-op for
olddefconfig because the following if-else block does nothing.
if (input_mode == listnewconfig) {
...
} else if (input_mode != olddefconfig) {
...
}
As the help message says, olddefconfig automatically sets new symbols
to their default value. There is no room for manual intervention.
So, calling check_conf() for olddefconfig is odd in the first place.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
=== Background ===
- Visible n-valued bool/tristate symbols generate a
'# CONFIG_FOO is not set' line in the .config file. The idea is to
remember the user selection without having to set a Makefile
variable. Having n correspond to the variable being undefined in the
Makefiles makes for easy CONFIG_* tests.
- Invisible n-valued bool/tristate symbols normally do not generate a
'# CONFIG_FOO is not set' line, because user values from .config
files have no effect on invisible symbols anyway.
Currently, there is one exception to this rule: Any bool/tristate symbol
that gets the value n through a 'default' property generates a
'# CONFIG_FOO is not set' line, even if the symbol is invisible.
Note that this only applies to explicitly given defaults, and not when
the symbol implicitly defaults to n (like bool/tristate symbols without
'default' properties do).
This is inconsistent, and seems redundant:
- As mentioned, the '# CONFIG_FOO is not set' won't affect the symbol
once the .config is read back in.
- Even if the symbol is invisible at first but becomes visible later,
there shouldn't be any harm in recalculating the default value
rather than viewing the '# CONFIG_FOO is not set' as a previous
user value of n.
=== Changes ===
Change sym_calc_value() to only set SYMBOL_WRITE (write to .config) for
non-n-valued 'default' properties.
Note that SYMBOL_WRITE is always set for visible symbols regardless of whether
they have 'default' properties or not, so this change only affects invisible
symbols.
This reduces the size of the x86 .config on my system by about 1% (due
to removed '# CONFIG_FOO is not set' entries).
One side effect of (and the main motivation for) this change is making
the following two definitions behave exactly the same:
config FOO
bool
config FOO
bool
default n
With this change, neither of these will generate a
'# CONFIG_FOO is not set' line (assuming FOO isn't selected/implied).
That might make it clearer to people that a bare 'default n' is
redundant.
This change only affects generated .config files and not autoconf.h:
autoconf.h only includes #defines for non-n bool/tristate symbols.
=== Testing ===
The following testing was done with the x86 Kconfigs:
- .config files generated before and after the change were compared to
verify that the only difference is some '# CONFIG_FOO is not set'
entries disappearing. A couple of these were inspected manually, and
most turned out to be from redundant 'default n/def_bool n'
properties.
- The generated include/generated/autoconf.h was compared before and
after the change and verified to be identical.
- As a sanity check, the same modification was done to Kconfiglib.
The Kconfiglib test suite was then run to check for any mismatches
against the output of the C implementation.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Surprisingly or not, disabling a CONFIG option (which is assumed to
be unneeded) may be not so trivial. Especially it is not trivial, when
this CONFIG option is selected by a dozen of other configs. Before the
moment commit 1ccb271433 ("kconfig: make "Selected by:" and
"Implied by:" readable") popped up in v4.16-rc1, it was an absolute pain
to break down the "Selected by" reverse dependency expression in order
to identify all those configs which select (IOW *do not allow
disabling*) a certain feature (assumed to be not needed).
This patch tries to make one step further by putting at users'
fingertips the revdep top level OR sub-expressions grouped/clustered by
the tristate value they evaluate to. This should allow the users to
directly concentrate on and tackle the _active_ reverse dependencies.
To give some numbers and quantify the complexity of certain reverse
dependencies, assuming commit 617aebe6a9 ("Merge tag
'usercopy-v4.16-rc1' of
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux"), ARCH=arm64
and vanilla arm64 defconfig, here is the top 10 CONFIG options with
the highest amount of top level "||" sub-expressions/tokens that make
up the final "Selected by" reverse dependency expression.
| Config | All revdep | Active revdep |
|-------------------|------------|---------------|
| REGMAP_I2C | 212 | 9 |
| CRC32 | 167 | 25 |
| FW_LOADER | 128 | 5 |
| MFD_CORE | 124 | 9 |
| FB_CFB_IMAGEBLIT | 114 | 2 |
| FB_CFB_COPYAREA | 111 | 2 |
| FB_CFB_FILLRECT | 110 | 2 |
| SND_PCM | 103 | 2 |
| CRYPTO_HASH | 87 | 19 |
| WATCHDOG_CORE | 86 | 6 |
The story behind the above is that users need to visually
review/evaluate 212 expressions which *potentially* select REGMAP_I2C
in order to identify the expressions which *actually* select REGMAP_I2C,
for a particular ARCH and for a particular defconfig used.
To make this experience smoother, change the way reverse dependencies
are displayed to the user from [1] to [2].
[1] Old representation of DMA_ENGINE_RAID:
Selected by:
- AMCC_PPC440SPE_ADMA [=n] && DMADEVICES [=y] && (440SPe || 440SP)
- BCM_SBA_RAID [=m] && DMADEVICES [=y] && (ARM64 [=y] || ...
- FSL_RAID [=n] && DMADEVICES [=y] && FSL_SOC && ...
- INTEL_IOATDMA [=n] && DMADEVICES [=y] && PCI [=y] && X86_64
- MV_XOR [=n] && DMADEVICES [=y] && (PLAT_ORION || ARCH_MVEBU [=y] ...
- MV_XOR_V2 [=y] && DMADEVICES [=y] && ARM64 [=y]
- XGENE_DMA [=n] && DMADEVICES [=y] && (ARCH_XGENE [=y] || ...
- DMATEST [=n] && DMADEVICES [=y] && DMA_ENGINE [=y]
[2] New representation of DMA_ENGINE_RAID:
Selected by [y]:
- MV_XOR_V2 [=y] && DMADEVICES [=y] && ARM64 [=y]
Selected by [m]:
- BCM_SBA_RAID [=m] && DMADEVICES [=y] && (ARM64 [=y] || ...
Selected by [n]:
- AMCC_PPC440SPE_ADMA [=n] && DMADEVICES [=y] && (440SPe || ...
- FSL_RAID [=n] && DMADEVICES [=y] && FSL_SOC && ...
- INTEL_IOATDMA [=n] && DMADEVICES [=y] && PCI [=y] && X86_64
- MV_XOR [=n] && DMADEVICES [=y] && (PLAT_ORION || ARCH_MVEBU [=y] ...
- XGENE_DMA [=n] && DMADEVICES [=y] && (ARCH_XGENE [=y] || ...
- DMATEST [=n] && DMADEVICES [=y] && DMA_ENGINE [=y]
Suggested-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This commit splits out the special E_OR handling ('-' instead of '||')
into a dedicated helper expr_print_revdev().
Restore the original expr_print() prior to commit 1ccb271433
("kconfig: make "Selected by:" and "Implied by:" readable").
This makes sense because:
- We need to chop those expressions only when printing the reverse
dependency, and only when E_OR is encountered
- Otherwise, it should be printed as before, so fall back to
expr_print()
This also improves the behavior; for a single line, it was previously
displayed in the same line as "Selected by", like this:
Selected by: A [=n] && B [=n]
This will be displayed in a new line, consistently:
Selected by:
- A [=n] && B [=n]
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Commit d3fc425e81 ("kbuild: make sure autoksyms.h exists early")
moved the code that touches autoksyms.h to scripts/kconfig/Makefile
with obscure reason.
From Nicolas' comment [1], he did not seem to be sure about the root
cause.
I guess I figured it out, so here is a fix-up I think is more correct.
According to the error log in the original post [2], the build failed
in scripts/mod/devicetable-offsets.c
scripts/mod/Makefile is descended from scripts/Makefile, which is
invoked from the top-level Makefile by the 'scripts' target.
To build vmlinux and/or modules, Kbuild descend into $(vmlinux-dirs).
This depends on 'prepare' and 'scripts' as follows:
$(vmlinux-dirs): prepare scripts
Because there is no dependency between 'prepare' and 'scripts', the
parallel building can execute them simultaneously.
'prepare' depends on 'prepare1', which touched autoksyms.h, while
'scripts' descends into script/, then scripts/mod/, which needs
<generated/autoksyms.h> if CONFIG_TRIM_UNUSED_KSYMS. It was the
reason of the race.
I am not happy to have unrelated code in the Kconfig Makefile, so
getting it back to the top Makefile.
I removed the standalone test target because I want to use it to
create an empty autoksyms.h file. Here is a little improvement;
unnecessary autoksyms.h is not created when CONFIG_TRIM_UNUSED_KSYMS
is disabled.
[1] https://lkml.org/lkml/2016/11/30/734
[2] https://lkml.org/lkml/2016/11/30/531
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
When recursive inclusion is detected, the line number of the last
'included from:' is wrong.
[Test Case]
Kconfig:
-------->8--------
source "Kconfig2"
-------->8--------
Kconfig2:
-------->8--------
source "Kconfig3"
-------->8--------
Kconfig3:
-------->8--------
source "Kconfig"
-------->8--------
[Result]
$ make allyesconfig
scripts/kconfig/conf --allyesconfig Kconfig
Kconfig:1: recursive inclusion detected. Inclusion path:
current file : 'Kconfig'
included from: 'Kconfig3:1'
included from: 'Kconfig2:1'
included from: 'Kconfig:3'
scripts/kconfig/Makefile:89: recipe for target 'allyesconfig' failed
make[1]: *** [allyesconfig] Error 1
Makefile:512: recipe for target 'allyesconfig' failed
make: *** [allyesconfig] Error 2
where we expect
current file : 'Kconfig'
included from: 'Kconfig3:1'
included from: 'Kconfig2:1'
included from: 'Kconfig:1'
The 'iter->lineno+1' in the second fpinrtf() should be 'iter->lineno-1'.
I refactored the code to merge the two fprintf() calls.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
The package name is ncurses-devel for Redhat based distros
and libncurses-dev for Debian based distros.
Signed-off-by: Arvind Prasanna <arvindprasanna@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The named choice is not used in the kernel tree, but if it were used,
it would not be freed.
The intention of the named choice can be seen in the log of
commit 5a1aa8a1af ("kconfig: add named choice group").
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
The 'defconfig_list' is a weird attribute. If the '.config' is
missing, conf_read_simple() iterates over all visible defaults,
then it uses the first one for which fopen() succeeds.
config DEFCONFIG_LIST
string
depends on !UML
option defconfig_list
default "/lib/modules/$UNAME_RELEASE/.config"
default "/etc/kernel-config"
default "/boot/config-$UNAME_RELEASE"
default "$ARCH_DEFCONFIG"
default "arch/$ARCH/defconfig"
However, like other symbols, the first visible default is always
written out to the .config file. This might be different from what
has been actually used.
For example, on my machine, the third one "/boot/config-$UNAME_RELEASE"
is opened, like follows:
$ rm .config
$ make oldconfig 2>/dev/null
scripts/kconfig/conf --oldconfig Kconfig
#
# using defaults found in /boot/config-4.4.0-112-generic
#
*
* Restart config...
*
*
* IRQ subsystem
*
Expose irq internals in debugfs (GENERIC_IRQ_DEBUGFS) [N/y/?] (NEW)
However, the resulted .config file contains the first one since it is
visible:
$ grep CONFIG_DEFCONFIG_LIST .config
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
In order to stop confusing people, prevent this CONFIG option from
being written to the .config file.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
We already have xmalloc(), xcalloc(), and xrealloc((). Add xstrdup()
as well to save tedious error handling.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This function returns realloc'ed memory, so the returned pointer
must be passed to free() when done. So, 'const' qualifier is odd.
It is allowed to modify the expanded string.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
We already have xmalloc(), xcalloc(). Add xrealloc() as well
to save tedious error handling.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
These messages should be directed to stderr.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
If stdio is not tty, conf_askvalue() puts additional new line to
prevent prompts from being concatenated into a single line. This
care is missing in conf_choice(), so a 'choice' prompt and the next
prompt are shown in the same line.
Move the code into xfgets() to cater to all cases. To improve this
more, let's echo stdin to stdout. This clarifies what keys were
input from stdio and the stdout looks like as if it were from tty.
I removed the isatty(2) check since stderr is unrelated here.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
Except silentoldconfig, valid_stdin is 1, so check_stdin() is no-op.
oldconfig and silentoldconfig work almost in the same way except that
the latter generates additional files under include/. Both ask users
for input for new symbols.
I do not know why only silentoldconfig requires stdio be tty.
$ rm -f .config; touch .config
$ yes "" | make oldconfig > stdout
$ rm -f .config; touch .config
$ yes "" | make silentoldconfig > stdout
make[1]: *** [silentoldconfig] Error 1
make: *** [silentoldconfig] Error 2
$ tail -n 4 stdout
Console input/output is redirected. Run 'make oldconfig' to update configuration.
scripts/kconfig/Makefile:40: recipe for target 'silentoldconfig' failed
Makefile:507: recipe for target 'silentoldconfig' failed
Redirection is useful, for example, for testing where we want to give
particular key inputs from a test file, then check the result.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
I could not figure out why this pattern should be ignored.
Checking commit 1e65174a33 ("Add some basic .gitignore files")
did not help.
Let's remove this pattern, then see if it is really needed.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
'make config', 'make oldconfig', etc. always receive '?' as a valid
input and show useful information even if no help text is available.
------------------------>8------------------------
foo (FOO) [N/y] (NEW) ?
There is no help available for this option.
Symbol: FOO [=n]
Type : bool
Prompt: foo
Defined at Kconfig:1
------------------------>8------------------------
However, '?' is not shown in the prompt if its help text is missing.
Let's show '?' all the time so that the prompt and the behavior match.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
"# CONFIG_... is not set" for choice values are wrongly written into
the .config file if they are once visible, then become invisible later.
Test case
---------
---------------------------(Kconfig)----------------------------
config A
bool "A"
choice
prompt "Choice ?"
depends on A
config CHOICE_B
bool "Choice B"
config CHOICE_C
bool "Choice C"
endchoice
----------------------------------------------------------------
---------------------------(.config)----------------------------
CONFIG_A=y
----------------------------------------------------------------
With the Kconfig and .config above,
$ make config
scripts/kconfig/conf --oldaskconfig Kconfig
*
* Linux Kernel Configuration
*
A (A) [Y/n] n
#
# configuration written to .config
#
$ cat .config
#
# Automatically generated file; DO NOT EDIT.
# Linux Kernel Configuration
#
# CONFIG_A is not set
# CONFIG_CHOICE_B is not set
# CONFIG_CHOICE_C is not set
Here,
# CONFIG_CHOICE_B is not set
# CONFIG_CHOICE_C is not set
should not be written into the .config file because their dependency
"depends on A" is unmet.
Currently, there is no code that clears SYMBOL_WRITE of choice values.
Clear SYMBOL_WRITE for all symbols in sym_calc_value(), then set it
again after calculating visibility. To simplify the logic, set the
flag if they have non-n visibility, regardless of types, and regardless
of whether they are choice values or not.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
Blank help texts are probably either a typo, a Kconfig misunderstanding,
or some kind of half-committing to adding a help text (in which case a
TODO comment would be clearer, if the help text really can't be added
right away).
Best to flag them, IMO.
Example warning:
drivers/mmc/host/Kconfig:877: warning: 'MMC_TOSHIBA_PCI' defined with blank help text
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
A pretty big batch of Kconfig updates. I have to mention the lexer
and parser of Kconfig are now built from real .l and .y sources.
So, flex and bison are the requirement for building the kernel.
Both of them (unlike gperf) have been stable for a long time. This
change has been tested several weeks in linux-next, and I did not
receive any problem report about this.
Summary:
- Add checks for mistakes, like the choice default is not in
choice, help is doubled
- Document data structure and complex code
- Fix various memory leaks
- Change Makefile to build lexer and parser instead of using
pre-generated C files
- Drop 'boolean' keyword, which is equivalent to 'bool'
- Use default 'yy' prefix and remove unneeded Make variables
- Fix gettext() check for xconfig
- Announce that oldnoconfig will be finally removed
- Make 'Selected by:' and 'Implied by' readable in help and
search result
- Hide silentoldconfig from 'make help' to stop confusing people
- Fix misc things and cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=rsi/
-----END PGP SIGNATURE-----
Merge tag 'kconfig-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kconfig updates from Masahiro Yamada:
"A pretty big batch of Kconfig updates.
I have to mention the lexer and parser of Kconfig are now built from
real .l and .y sources. So, flex and bison are the requirement for
building the kernel. Both of them (unlike gperf) have been stable for
a long time. This change has been tested several weeks in linux-next,
and I did not receive any problem report about this.
Summary:
- add checks for mistakes, like the choice default is not in choice,
help is doubled
- document data structure and complex code
- fix various memory leaks
- change Makefile to build lexer and parser instead of using
pre-generated C files
- drop 'boolean' keyword, which is equivalent to 'bool'
- use default 'yy' prefix and remove unneeded Make variables
- fix gettext() check for xconfig
- announce that oldnoconfig will be finally removed
- make 'Selected by:' and 'Implied by' readable in help and search
result
- hide silentoldconfig from 'make help' to stop confusing people
- fix misc things and cleanups"
* tag 'kconfig-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (37 commits)
kconfig: Remove silentoldconfig from help and docs; fix kconfig/conf's help
kconfig: make "Selected by:" and "Implied by:" readable
kconfig: announce removal of oldnoconfig if used
kconfig: fix make xconfig when gettext is missing
kconfig: Clarify menu and 'if' dependency propagation
kconfig: Document 'if' flattening logic
kconfig: Clarify choice dependency propagation
kconfig: Document SYMBOL_OPTIONAL logic
kbuild: remove unnecessary LEX_PREFIX and YACC_PREFIX
kconfig: use default 'yy' prefix for lexer and parser
kconfig: make conf_unsaved a local variable of conf_read()
kconfig: make xfgets() really static
kconfig: make input_mode static
kconfig: Warn if there is more than one help text
kconfig: drop 'boolean' keyword
kconfig: use bool instead of boolean for type definition attributes, again
kconfig: Remove menu_end_entry()
kconfig: Document important expression functions
kconfig: Document automatic submenu creation code
kconfig: Fix choice symbol expression leak
...
As explained by Michal Marek at https://lkml.org/lkml/2011/8/31/189
silentoldconfig has become a misnomer. It has become an internal interface
so remove it from "make help" and Documentation/ to stop confusing people
using it as seen for instance at
https://chromium-review.googlesource.com/835632 Don't remove it from
kconfig/Makefile yet not to break any (other) tool using it.
On the other hand, correct and expand its description in the help of
the (internal) scripts/kconfig/conf.c
Signed-off-by: Marc Herbert <marc.herbert@intel.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reverse dependency expressions can get rather unwieldy, especially if
a symbol is selected by more than a handful of other symbols. I.e. it's
possible to have near endless expressions like:
A && B && !C || D || F && (G || H) || [...]
Chop these expressions into actually readable chunks:
- A && B && !C
- D
- F && (G || H)
- [...]
I.e. transform the top level OR tokens into newlines and prepend each
line with a minus. This makes the "Selected by:" and "Implied by:" blurb
much easier to read. This is done only if there is more than one top
level OR. "Depends on:" and "Range :" were deliberately left as they are.
Based on idea from Paul Bolle.
Suggested-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The 'oldnoconfig' is really confusing due to its counter-intuitive name.
It was renamed by commit fb16d8912d ("kconfig: replace 'oldnoconfig'
with 'olddefconfig', and keep the old name as an alias").
The 'oldnoconfig' has been kept as an alias for enough period of time,
and finally I am planning to remove it. I will give people a little
more time for migration. Meanwhile, the following message will be
displayed if oldnoconfig is used.
WARNING: "oldnoconfig" target will be removed after Linux 4.19
Please use "olddefconfig" instead, which is an alias.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
The C-based config programs are properly guarded from a missing (or,
currently, external) libintl.h by the HOST_EXTRACFLAGS check, but
this does not help the C++-based qconf.
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
It is not obvious that the last two cases refer to menus and ifs,
respectively, in the conditional that sets 'parentdep'.
Automatic submenu creation is done later, so the parent can't be a
symbol here.
No functional changes. Only comments added.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
It is not obvious that this might refer to an 'if', making the code
pretty cryptic:
if (menu->list && (!menu->prompt || !menu->prompt->text)) {
Kconfig keeps the 'if' menu nodes even after flattening. Reflect that in
the example to be accurate.
No functional changes. Only comments added.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
It's easy to miss that choices are special-cased to pass on their mode
as the parent dependency.
No functional changes. Only comments added.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Not obvious, especially if you don't already know how choices are
implemented.
No functional changes. Only comments added.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Flex and Bison provide an option to change the prefix of globally-
visible symbols. This is useful to link multiple lexers and/or
parsers into the same executable. However, Kconfig (and any other
host programs in kernel) uses a single lexer and parser. I do not
see a good reason to change the default 'yy' prefix.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
conf_unsaved is initialized by conf_read_simple(), but it is possible
to move it to conf_read() so that it can be a local variable.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Sparse reports:
warning: symbol 'xfgets' was not declared. Should it be static?
It is declared as static, but it is missing in the definition part.
Move the definition up and remove the forward declaration.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Avoids mistakes like in the following real-world example, where only the
final help string ("Say Y...") was used. This particular example was
fixed in commit 561b29e4ec ("media: fix media Kconfig help syntax
issues").
config DVB_NETUP_UNIDVB
...
select DVB_CXD2841ER if MEDIA_SUBDRV_AUTOSELECT
---help---
Support for NetUP PCI express Universal DVB card.
help
Say Y when you want to support NetUP Dual Universal DVB card
...
This now prints the following warning:
drivers/media/pci/netup_unidvb:13: warning: 'DVB_NETUP_UNIDVB' defined with more than one help text -- only the last one will be used
Also free() any extra help strings.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
No more users of this keyword. Drop it according to the notice by
commit 6341e62b21 ("kconfig: use bool instead of boolean for type
definition attributes").
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Luis R. Rodriguez <mcgrof@kernel.org>
menu_end_entry() is empty and completely unused as far as I can tell:
$ git log -G menu_end_entry --oneline
a02f057 [PATCH] kconfig: improve error handling in the parser
1da177e Linux-2.6.12-rc2
Last one is the initial Git commit, where menu_end_entry() is empty as
well. I couldn't find anything that redefined it on Google either.
It might be a debugging helper for setting a breakpoint after each
config, menuconfig, and comment is parsed. IMO it hurts more than it
helps in that case by making the parsing code look more complicated at a
glance than it really is, and I suspect it doesn't get used much.
Tested by running the Kconfiglib test suite, which indirectly verifies
that the .config files generated by the C implementation for each
defconfig file in the kernel stays the same.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Many of these functions are quite the head scratchers if you don't know
what they're trying to do. Document them.
Also make it clear which functions rewrite expressions in-place and
which return new expressions. This prevents memory errors.
No functional changes. Only comments added.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
It's tricky to figure out what it does (and how) without staring at the
code for a long time. Document it to make it more transparent.
No functional changes. Only comments added.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
When propagating dependencies from parents after parsing, an expression
node is allocated if the parent symbol is a 'choice'. This node was
never freed.
Outline of leak:
if (sym && sym_is_choice(sym)) {
...
*Allocate (in this case only)*
parentdep = expr_alloc_symbol(sym);
} else if (parent->prompt)
parentdep = parent->prompt->visible.expr;
else
parentdep = parent->dep;
for (menu = parent->list; menu; menu = menu->next) {
...
*Copy*
basedep = expr_alloc_and(expr_copy(parentdep), basedep);
...
}
*parentdep lost if the parent is a choice!*
Fix by freeing 'parentdep' after the loop if the parent symbol is a
choice. Note that this only frees the expression node and not the choice
symbol itself.
Summary from Valgrind on 'menuconfig' (ARCH=x86) before the fix:
LEAK SUMMARY:
definitely lost: 1,608 bytes in 67 blocks
...
Summary after the fix:
LEAK SUMMARY:
definitely lost: 0 bytes in 0 blocks
...
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Only the E_NOT operand and not the E_NOT node itself was freed, due to
accidentally returning too early in expr_free(). Outline of leak:
switch (e->type) {
...
case E_NOT:
expr_free(e->left.expr);
return;
...
}
*Never reached, 'e' leaked*
free(e);
Fix by changing the 'return' to a 'break'.
Summary from Valgrind on 'menuconfig' (ARCH=x86) before the fix:
LEAK SUMMARY:
definitely lost: 44,448 bytes in 1,852 blocks
...
Summary after the fix:
LEAK SUMMARY:
definitely lost: 1,608 bytes in 67 blocks
...
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
expr_trans_compare() always allocates and returns a new expression,
giving the following leak outline:
...
*Allocate*
basedep = expr_trans_compare(basedep, E_UNEQUAL, &symbol_no);
...
for (menu = parent->next; menu; menu = menu->next) {
...
*Copy*
dep2 = expr_copy(basedep);
...
*Free copy*
expr_free(dep2);
}
*basedep lost!*
Fix by freeing 'basedep' after the loop.
Summary from Valgrind on 'menuconfig' (ARCH=x86) before the fix:
LEAK SUMMARY:
definitely lost: 344,376 bytes in 14,349 blocks
...
Summary after the fix:
LEAK SUMMARY:
definitely lost: 44,448 bytes in 1,852 blocks
...
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
If a 'mainmenu' entry appeared in the Kconfig files, two things would
leak:
- The 'struct property' allocated for the default "Linux Kernel
Configuration" prompt.
- The string for the T_WORD/T_WORD_QUOTE prompt after the
T_MAINMENU token, allocated on the heap in zconf.l.
To fix it, introduce a new 'no_mainmenu_stmt' nonterminal that matches
if there's no 'mainmenu' and adds the default prompt. That means the
prompt only gets allocated once regardless of whether there's a
'mainmenu' statement or not, and managing it becomes simple.
Summary from Valgrind on 'menuconfig' (ARCH=x86) before the fix:
LEAK SUMMARY:
definitely lost: 344,568 bytes in 14,352 blocks
...
Summary after the fix:
LEAK SUMMARY:
definitely lost: 344,440 bytes in 14,350 blocks
...
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The following strings would leak before this change:
- option env="LEAKED"
- option defconfig_list="LEAKED"
These come in the form of T_WORD tokens and are always allocated on the
heap in zconf.l. Free them.
Summary from Valgrind on 'menuconfig' (ARCH=x86) before the fix:
LEAK SUMMARY:
definitely lost: 344,616 bytes in 14,355 blocks
...
Summary after the fix:
LEAK SUMMARY:
definitely lost: 344,568 bytes in 14,352 blocks
...
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The 'source_stmt' nonterminal takes a 'prompt', which consists of either
a T_WORD or a T_WORD_QUOTE, both of which are always allocated on the
heap in zconf.l and need to have their associated strings freed. Free
them.
The existing code already makes sure to always copy the string, but add
a warning to sym_expand_string_value() to make it clear that the string
must be copied, just in case.
Summary from Valgrind on 'menuconfig' (ARCH=x86) before the fix:
LEAK SUMMARY:
definitely lost: 387,504 bytes in 15,545 blocks
...
Summary after the fix:
LEAK SUMMARY:
definitely lost: 344,616 bytes in 14,355 blocks
...
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Prior to this fix, zconf.y did not free symbol names from zconf.l in
these contexts:
- After T_CONFIG ('config LEAKED')
- After T_MENUCONFIG ('menuconfig LEAKED')
- After T_SELECT ('select LEAKED')
- After T_IMPLY ('imply LEAKED')
- After T_DEFAULT in a choice ('default LEAKED')
All of these come in the form of T_WORD tokens, which always have their
associated string allocated on the heap in zconf.l and need to be freed.
Fix by introducing a new nonterminal 'nonconst_symbol' which takes a
T_WORD, fetches the symbol, and then frees the T_WORD string. The
already existing 'symbol' nonterminal works the same way but also
accepts T_WORD_QUOTE, corresponding to a constant symbol. T_WORD_QUOTE
should not be accepted in any of the contexts above, so the 'symbol'
nonterminal can't be reused here.
Fetching the symbol in 'nonconst_symbol' also removes a bunch of
sym_lookup() calls from actions.
Summary from Valgrind on 'menuconfig' (ARCH=x86) before the fix:
LEAK SUMMARY:
definitely lost: 711,571 bytes in 37,756 blocks
...
Summary after the fix:
LEAK SUMMARY:
definitely lost: 387,504 bytes in 15,545 blocks
...
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Since commit 31847b67be ("kconfig: allow use of relations other than
(in)equality") it is possible to use relational operators in Kconfig
statements. However, those operators give unexpected results when
applied to bool/tristate values:
(n < y) = y (correct)
(m < y) = y (correct)
(n < m) = n (wrong)
This happens because relational operators process bool and tristate
symbols as strings and m sorts before n. It makes little sense to do a
lexicographical compare on bool and tristate values though.
Documentation/kbuild/kconfig-language.txt states that expression can have
a value of 'n', 'm' or 'y' (or 0, 1, 2 respectively for calculations).
Let's make it so for relational comparisons with bool/tristate
expressions as well and document them. If at least one symbol is an
actual string then the lexicographical compare works just as before.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
zconf.lex.c is generated by flex, zconf.tab.c by bison. Instead of
running flex and bison during the kernel building, we conventionally
version-control those artifacts with _shipped suffix.
It is tedious to manually regenerate them every time we change the
real sources, zconf.l and zconf.y.
Remove the _shipped files and switch over to build-time generation
of the intermediate C files.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Commit 1c199f2878 ("kbuild: document recursive dependency limitation
/ resolution") probably intended to show a hint along with "recursive
dependency detected!" error, but it missed to add {...} guard, and the
hint is displayed in every loop of the dep_stack traverse, annoyingly.
This error was detected by GCC's -Wmisleading-indentation when switching
to build-time generation of lexer/parser.
scripts/kconfig/symbol.c: In function ‘sym_check_print_recursive’:
scripts/kconfig/symbol.c:1150:3: warning: this ‘if’ clause does not guard... [-Wmisleading-indentation]
if (stack->sym == last_sym)
^~
scripts/kconfig/symbol.c:1153:4: note: ...this statement, but the latter is misleadingly indented as if it were guarded by the ‘if’
fprintf(stderr, "For a resolution refer to Documentation/kbuild/kconfig-language.txt\n");
^~~~~~~
I could simply add {...} to surround the three fprintf(), but I rather
chose to move the hint after the loop to make the whole message readable.
Fixes: 1c199f2878 ("kbuild: document recursive dependency limitation / resolution"
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Luis R. Rodriguez <mcgrof@kernel.org>
Kconfig currently doesn't handle 'm' appearing in a Kconfig file before
the modules symbol is defined (the symbol with 'option modules'). The
problem is the following code, which runs during parsing:
/* change 'm' into 'm' && MODULES */
if (e->left.sym == &symbol_mod)
return expr_alloc_and(e, expr_alloc_symbol(modules_sym));
If the modules symbol has not yet been defined, modules_sym is NULL,
giving an invalid expression.
Here is a test file where both BEFORE_1 and BEFORE_2 trigger a segfault.
If the modules symbol is removed, all symbols trigger segfaults.
config BEFORE_1
def_tristate y if m
if m
config BEFORE_2
def_tristate y
endif
config MODULES
def_bool y
option modules
config AFTER_1
def_tristate y if m
if m
config AFTER_2
def_tristate y
endif
Fix the issue by rewriting 'm' in menu_finalize() instead. This function
runs after parsing and is the proper place to do it. The following
existing code in conf_parse() in zconf.y ensures that the modules symbol
exists at that point:
if (!modules_sym)
modules_sym = sym_find( "n" );
...
menu_finalize(&rootmenu);
The following tests were done to ensure no functional changes for
configurations that don't reference 'm' before the modules symbol:
- zconfdump(stdout) was run with ARCH=x86 and ARCH=arm before
and after the change and verified to produce identical output.
This function prints all symbols, choices, and menus together
with their properties and their dependency expressions. A
rewritten 'm' appears as 'm && MODULES'.
A small annoyance is that the assert(len != 0) in xfwrite()
needs to be disabled in order to use zconfdump(), because it
chokes on e.g. 'default ""'.
- The Kconfiglib test suite was run to indirectly verify that
alldefconfig, allyesconfig, allnoconfig, and all defconfigs in
the kernel still generate the same final .config.
- Valgrind was used to check for memory errors and (new) memory
leaks.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
menu_finalize() is one of the more opaque parts of Kconfig, and I need
to make some changes to it to fix an issue related to modules. Add some
comments related to expression rewriting and dependency propagation as a
review aid. They will also help other people trying to understand the
code.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
More directly describes the only thing it does.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Looks like a change to a comment in zconf.y was never committed, because
the updated version only appears it zconf.tab.c_shipped. Update the
comment in zconf.y to match.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Visibility and choices in particular might be a bit tricky to figure
out.
Also fix existing comment to point out that P_MENU is also used for
menus.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Understanding what it represents helps a lot when reading the code, and
it's not obvious, so document it.
The ROOT_MENU flag is only set and tested by the gconf and qconf front
ends, so leave it undocumented here. The obvious guess for what it means
is correct.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
This will catch mistakes like in the following real-world example, where
a "CONFIG_" prefix snuck in, making an undefined symbol the default:
choice
prompt "Compiler optimization level"
default CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE
config CC_OPTIMIZE_FOR_PERFORMANCE
...
config CC_OPTIMIZE_FOR_SIZE
...
endchoice
This now prints the following warning:
init/Kconfig:1036:warning: choice default symbol 'CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE' is not contained in the choice
Cases where the default symbol belongs to the wrong choice are also
detected.
(The mistake is harmless here: Since the default symbol is not visible,
the choice falls back on using the first visible symbol as the default,
which is CC_OPTIMIZE_FOR_PERFORMANCE, as intended.)
Discovered while playing around with Kconfiglib
(https://github.com/ulfalizer/Kconfiglib).
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
sym_arr is of type struct symbol **.
So in malloc we need sizeof(struct symbol *).
The problem was indicated by coccinelle.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It turns out that gperf-3.1 changed types in the generated code in ways
that aren't even trivially detectable without having to generate a test-file.
It's just not worth using tools and libraries from clowns that don't
understand or care about compatibility. So get rid of gperf.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Use more portable shebang for Perl scripts
- Remove trailing spaces from GCC version in kernel log
- Make initramfs generation deterministic
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=C+WJ
-----END PGP SIGNATURE-----
Merge tag 'kbuild-misc-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull misc Kbuild updates from Masahiro Yamada:
- Use more portable shebang for Perl scripts
- Remove trailing spaces from GCC version in kernel log
- Make initramfs generation deterministic
* tag 'kbuild-misc-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: create deterministic initramfs directory listings
scripts/mkcompile_h: Remove trailing spaces from compiler version
scripts: Switch to more portable Perl shebang
Fix sparse warnings in scripts/kconfig/nconf* ('make nconfig'):
../scripts/kconfig/nconf.c:1071:32: warning: Using plain integer as NULL pointer
../scripts/kconfig/nconf.c:1238:30: warning: Using plain integer as NULL pointer
../scripts/kconfig/nconf.c:511:51: warning: Using plain integer as NULL pointer
../scripts/kconfig/nconf.c:1460:6: warning: symbol 'setup_windows' was not declared. Should it be static?
../scripts/kconfig/nconf.c:274:12: warning: symbol 'current_instructions' was not declared. Should it be static?
../scripts/kconfig/nconf.c:308:22: warning: symbol 'function_keys' was not declared. Should it be static?
../scripts/kconfig/nconf.gui.c:132:17: warning: non-ANSI function declaration of function 'set_colors'
../scripts/kconfig/nconf.gui.c:195:24: warning: Using plain integer as NULL pointer
nconf.gui.o before/after files are the same.
nconf.o before/after files are the same until the 'static' function
declarations are added.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
There is a check and a nice user-friendly message when the curses
library is not present on the system and the user wants to do "make
menuconfig". It doesn't get issued, though. Instead, we fail the build
when mconf.c doesn't find the curses.h header:
HOSTCC scripts/kconfig/mconf.o
In file included from scripts/kconfig/mconf.c:23:0:
scripts/kconfig/lxdialog/dialog.h:38:20: fatal error: curses.h: No such file or directory
#include CURSES_LOC
^
compilation terminated.
Make that check a prerequisite to mconf so that the user sees the error
message instead:
$ make menuconfig
*** Unable to find the ncurses libraries or the
*** required header files.
*** 'make menuconfig' requires the ncurses libraries.
***
*** Install ncurses (ncurses-devel) and try again.
***
scripts/kconfig/Makefile:203: recipe for target 'scripts/kconfig/dochecklxdialog' failed
make[1]: *** [scripts/kconfig/dochecklxdialog] Error 1
Makefile:548: recipe for target 'menuconfig' failed
make: *** [menuconfig] Error 2
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The default NetBSD package manager is pkgsrc and it installs Perl
along other third party programs under custom and configurable prefix.
The default prefix for binary prebuilt packages is /usr/pkg, and the
Perl executable lands in /usr/pkg/bin/perl.
This change switches "/usr/bin/perl" to "/usr/bin/env perl" as it's
the most portable solution that should work for almost everybody.
Perl's executable is detected automatically.
This change switches -w option passed to the executable with more
modern "use warnings;" approach. There is no functional change to the
default behavior.
While there, drop "require 5" from scripts/namespace.pl (Perl from 1994?).
Signed-off-by: Kamil Rytarowski <n54@gmx.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
When building the kernel with clang, the compiler complains about the
presence of a condition inside two pairs of parentheses:
scripts/kconfig/gconf.c:917:19: error: equality comparison with
extraneous parentheses [-Werror,-Wparentheses-equality]
} else if ((col == COL_OPTION)) {
~~~~^~~~~~~~~~~~~
scripts/kconfig/gconf.c:917:19: note: remove extraneous parentheses
around the comparison to silence this warning
} else if ((col == COL_OPTION)) {
~ ^ ~
scripts/kconfig/gconf.c:917:19: note: use '=' to turn this equality
comparison into an assignment
} else if ((col == COL_OPTION)) {
^~
=
Silence this warning by removing a level of parentheses.
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Pull kconfig updates from Michal Marek:
- 'make xconfig' gui fixes
- 'make nconfig' fix for options with long prompts
- fix 'make nconfig' warning when pkg-config forces -D_GNU_SOURCE
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
xconfig: fix missing suboption and help panels on first run
xconfig: fix 'Show Debug' functionality
kconfig/nconf: Fix hang when editing symbol with a long prompt
Scripts: kconfig: nconf: fix _GNU_SOURCE redefined warning
Pull timer updates from Thomas Gleixner:
"The time/timekeeping/timer folks deliver with this update:
- Fix a reintroduced signed/unsigned issue and cleanup the whole
signed/unsigned mess in the timekeeping core so this wont happen
accidentaly again.
- Add a new trace clock based on boot time
- Prevent injection of random sleep times when PM tracing abuses the
RTC for storage
- Make posix timers configurable for real tiny systems
- Add tracepoints for the alarm timer subsystem so timer based
suspend wakeups can be instrumented
- The usual pile of fixes and updates to core and drivers"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
timekeeping: Use mul_u64_u32_shr() instead of open coding it
timekeeping: Get rid of pointless typecasts
timekeeping: Make the conversion call chain consistently unsigned
timekeeping_Force_unsigned_clocksource_to_nanoseconds_conversion
alarmtimer: Add tracepoints for alarm timers
trace: Update documentation for mono, mono_raw and boot clock
trace: Add an option for boot clock as trace clock
timekeeping: Add a fast and NMI safe boot clock
timekeeping/clocksource_cyc2ns: Document intended range limitation
timekeeping: Ignore the bogus sleep time if pm_trace is enabled
selftests/timers: Fix spelling mistake "Asyncrhonous" -> "Asynchronous"
clocksource/drivers/bcm2835_timer: Unmap region obtained by of_iomap
clocksource/drivers/arm_arch_timer: Map frame with of_io_request_and_map()
arm64: dts: rockchip: Arch counter doesn't tick in system suspend
clocksource/drivers/arm_arch_timer: Don't assume clock runs in suspend
posix-timers: Make them configurable
posix_cpu_timers: Move the add_device_randomness() call to a proper place
timer: Move sys_alarm from timer.c to itimer.c
ptp_clock: Allow for it to be optional
Kconfig: Regenerate *.c_shipped files after previous changes
...
qconfig initial slider sizes fix.
On first `make xconfig`, suboption and help panels were hidden.
Now we properly detect the first run, and show those panels.
Reported-by: Jason Vas Dias <jason.vas.dias@gmail.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
xconfig - Fix missing 'Show Debug' functionality.
xconfig Help mentions 'Show Debug Info' but it was missing from any
menu.
* Add 'Show debug' menu to the main menu.
* Properly load showDebug settings.
Reported-by: Jason Vas Dias <jason.vas.dias@gmail.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Michal Marek <mmarek@suse.com>
Currently it is impossible to edit the value of a config symbol with a
prompt longer than (terminal width - 2) characters. dialog_inputbox()
calculates a negative x-offset for the input window and newwin() fails
as this is invalid. It also doesn't check for this failure, so it
busy-loops calling wgetch(NULL) which immediately returns -1.
The additions in the offset calculations also don't match the intended
size of the window.
Limit the window size and calculate the offset similarly to
show_scroll_win().
Cc: stable <stable@vger.kernel.org>
Fixes: 692d97c380 ("kconfig: new configuration interface (nconfig)")
Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Some people are able to trigger a race where autoksyms.h is used before
its empty version is even created. Let's create it at the same time as
the directory holding it is created.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Tested-by: Prarit Bhargava <prarit@redhat.com>
Tested-by: Jarod Wilson <jarod@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix below warning when make nconfig is run initially
or after make clean.
HOSTCC scripts/kconfig/nconf.o
scripts/kconfig/nconf.c:8:0: warning: "_GNU_SOURCE" redefined
#define _GNU_SOURCE
^
<command-line>:0:0: note: this is the location of the previous definition
Signed-off-by: Cheah Kok Cheong <thrust73@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
The "imply" keyword is a weak version of "select" where the target
config symbol can still be turned off, avoiding those pitfalls that come
with the "select" keyword.
This is useful e.g. with multiple drivers that want to indicate their
ability to hook into a secondary subsystem while allowing the user to
configure that subsystem out without also having to unset these drivers.
Currently, the same effect can almost be achieved with:
config DRIVER_A
tristate
config DRIVER_B
tristate
config DRIVER_C
tristate
config DRIVER_D
tristate
[...]
config SUBSYSTEM_X
tristate
default DRIVER_A || DRIVER_B || DRIVER_C || DRIVER_D || [...]
This is unwieldy to maintain especially with a large number of drivers.
Furthermore, there is no easy way to restrict the choice for SUBSYSTEM_X
to y or n, excluding m, when some drivers are built-in. The "select"
keyword allows for excluding m, but it excludes n as well. Hence
this "imply" keyword. The above becomes:
config DRIVER_A
tristate
imply SUBSYSTEM_X
config DRIVER_B
tristate
imply SUBSYSTEM_X
[...]
config SUBSYSTEM_X
tristate
This is much cleaner, and way more flexible than "select". SUBSYSTEM_X
can still be configured out, and it can be set as a module when none of
the drivers are configured in or all of them are modular.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <john.stultz@linaro.org>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Cc: Paul Bolle <pebolle@tiscali.nl>
Cc: linux-kbuild@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: Michal Marek <mmarek@suse.com>
Cc: Edward Cree <ecree@solarflare.com>
Link: http://lkml.kernel.org/r/1478841010-28605-2-git-send-email-nicolas.pitre@linaro.org
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Pull kconfig update from Michal Marek:
- fix for behavior of tristate choice items and fix for documentation
of existing kconfig behavior [Dirk Gouders]
- more helpful "unexpected data" kconfig warning [Paul Bolle]
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kconfig/symbol.c: handle choice_values that depend on 'm' symbols
kconfig-language: elaborate on the type of a choice
kconfig-language: fix comment on dependency-generated menu structures.
kconfig: add unexpected data itself to warning
If choices consist of choice_values of type tristate that depend on
symbols set to 'm', those choice_values are not set to 'n' if the
choice is changed from 'm' to 'y' (in which case only one active
choice_value is allowed). Those values are also written to the config
file causing modules to be built when they should not.
The following config can be used to reproduce and examine the problem;
with the frontend of your choice set "Choice 0" and "Choice 1" to 'm',
then set "Tristate Choice" to 'y' and save the configuration:
config modules
boolean modules
default y
option modules
config dependency
tristate "Dependency"
default m
choice
prompt "Tristate Choice"
default choice0
config choice0
tristate "Choice 0"
config choice1
tristate "Choice 1"
depends on dependency
endchoice
This patch sets tristate choice_values' visibility that depend on
symbols set to 'm' to 'n' if the corresponding choice is set to 'y'.
This makes them disappear from the choice list and will also cause the
choice_values' value set to 'n' in sym_calc_value() and as a result
they are written as "not set" to the resulting .config file.
Reported-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Tested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Tested-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
If the .config parser runs into unexpected data it emits warnings like:
.config:6911:warning: unexpected data
Add the unexpected data itself to this warning. That makes it easier to
discover what is actually going wrong:
.config:6911:warning: unexpected data: CONFOG_CHARGER_TPS65217=m
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Michal Marek <mmarek@suse.com>
Also recognize standalone "prompt".
Before this patch we incorrectly identified some symbols as not having a
prompt and potentially needing to be selected by something else.
Note that this patch could theoretically change the resulting .config,
causing it to have fewer symbols turned on. However, given the current set
of Kconfig files, this situation does not occur because the symbols newly
added to %prompts are absent from %selects.
Link: http://lkml.kernel.org/r/1461696998-3953-1-git-send-email-bpoirier@suse.com
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When using `make localmodconfig` and friends, if the input config comes
from a kernel that was built in a different environment (for example, the
canonical case of using localmodconfig to trim a distribution kernel
config) the key files for module signature checking will not be available
and should be regenerated or omitted. Otherwise, the user will be faced
with annoying errors when trying to build with the generated .config:
make[1]: *** No rule to make target 'keyring.crt', needed by 'certs/x509_certificate_list'. Stop.
Makefile:1576: recipe for target 'certs/' failed
Link: http://lkml.kernel.org/r/1461696721-3001-1-git-send-email-bpoirier@suse.com
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
That is clearly what the original intention was. This does not change the
output .config but it prevents some useless processing.
! eq "m" is changed to the simpler eq "y"; symbols with values other than
m|y are not included in %orig_configs.
Link: http://lkml.kernel.org/r/1460333193-16361-3-git-send-email-bpoirier@suse.com
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Help text may start with "help" or "---help---". This patch fixes
read_kconfig() to recognize the second variant.
This removes useless junk from %depends and %selects. That junk is due to
help text that contains the words "selects" and "depends".
Link: http://lkml.kernel.org/r/1460333193-16361-2-git-send-email-bpoirier@suse.com
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Based on the list in Documentation/kbuild/kconfig-language.txt
This removes junk from %depends because parsing of a menu entry spilled
over to another menu entry.
Link: http://lkml.kernel.org/r/1460333193-16361-1-git-send-email-bpoirier@suse.com
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The parameter of Kconfig "source" statements does not need to be quoted.
The current regex causes many kconfig files to be skipped and hence,
dependencies to be missed.
Also fix the whitespace repeat count.
Link: http://lkml.kernel.org/r/1459619722-13695-1-git-send-email-bpoirier@suse.com
Tested-by: Lee, Chun-Yi <jlee@suse.com>
Signed-off-by: Benjamin Poirier <bpoirier@suse.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Prior to 3.13 make allmodconfig KCONFIG_ALLCONFIG=/dev/null used
to be equivalent to make allmodconfig; these days it hardwires MODULES to n.
In fact, any KCONFIG_ALLCONFIG that doesn't set MODULES explicitly is
treated as if it set it to n.
Regression had been introduced by commit cfa98f ("kconfig: do not
override symbols already set"); what happens is that conf_read_simple()
does sym_calc_value(modules_sym) on exit, which leaves SYMBOL_VALID set and
has conf_set_all_new_symbols() skip modules_sym.
It's pretty easy to fix - simply move that call of sym_calc_value()
into the callers, except for the ones in KCONFIG_ALLCONFIG handling.
Objections?
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Fixes: cfa98f2e0a ("kconfig: do not override symbols already set")
Signed-off-by: Michal Marek <mmarek@suse.com>
Documentation/Changes still lists this as the minimal required version,
so it ought to remain usable for the time being.
Fixes: d2036f30cf ("scripts/kconfig/Makefile: Allow KBUILD_DEFCONFIG to be a target")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Michal Marek <mmarek@suse.com>
On Debian stable (qt-4.8.6) 'make xconfig' intermittently fails due to
qconf segfaulting at exit time in QXcbEventReader. The cause of this is
destructors on the heap objects never being called, so fix this by
properly deleting the heap objects before exit.
Signed-off-by: Chris Bainbridge <chris.bainbridge@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
menu_is_visible() is a bool function and should use boolean return
values. "no" is a tristate value which happens to also have a value
of 0, but we should nevertheless use the right symbol for it.
This is a very minor cleanup with no semantic change.
Fixes: 86e187ff9 ("kconfig: add an option to determine a menu's visibility")
Cc: Arnaud Lacombe <lacombar@gmail.com>
Cc: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
The current (arbitrary) limit of 128 characters for path names has
proven too short for Android builds, as longer path names are used
there.
Change conf.c, so it can handle path lengths up to PATH_MAX characters.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Pull kconfig updates from Michal Marek:
- 'make xconfig' ported to Qt5, dropping support for Qt3
- merge_config.sh supports a single-input-file mode and also respects
$KCONFIG_CONFIG
- Fix for incorrect display of >= and > in dependency expressions
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: (44 commits)
Add current selection check.
Use pkg-config to find Qt 4 and 5 instead of direct qmake
kconfig: Fix copy&paste error
kconfig/merge_config.sh: Accept a single file
kconfig/merge_config.sh: Support KCONFIG_CONFIG
Update the buildsystem for KConfig finding Qt
Port xconfig to Qt5 - Update copyright.
Port xconfig to Qt5 - Fix goParent issue.
Port xconfig to Qt5 - on Back clicked, deselect old item.
Port xconfig to Qt5 - Add(back) one click checkbox toggle.
Port xconfig to Qt5 - Add(back) lineedit editing.
Port xconfig to Qt5 - Remove some commented code.
Port xconfig to Qt5 - Source format.
Port xconfig to Qt5 - Add horizontal scrollbar, and scroll per pixel.
Port xconfig to Qt5 - Change ConfigItem constructor parent type.
Port xconfig to Qt5 - Disable ConfigList soring
Port xconfig to Qt5 - Remove ConfigList::updateMenuList template.
Port xconfig to Qt5 - Add ConfigList::mode to initializer list.
Port xconfig to Qt5 - Add ConfigItem::nextItem to initializer list.
Port xconfig to Qt5 - Tree widget set column titles.
...
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
[mmarek: I missed it in the original Qt5 patch set, which caused a crash]
Signed-off-by: Michal Marek <mmarek@suse.com>
The Qt Project recommendation is that there should always be a "qmake"
binary and it should never be renamed. If it's necessary to handle
multiple Qt versions, the Qt Project recommends using qtchooser.
Unfortunately, some distros do not follow the recommendation, so we
would need to check qmake-qt4, qmake-qt5, etc. So, instead, let's try
pkg-config.
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Reported-by: Alexey Brodkin <abrodkin@synopsys.com>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Fixes: 31847b67be ("kconfig: allow use of relations other than (in)equality")
Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
My recent commit d2036f30cf ("scripts/kconfig/Makefile: Allow
KBUILD_DEFCONFIG to be a target"), contained a bug in that when it
checks if KBUILD_DEFCONFIG is a file it forgets to prepend $(srctree) to
the path.
This causes the build to fail when building out of tree (with O=), and
when the value of KBUILD_DEFCONFIG is 'defconfig'. In that case we will
fail to find the 'defconfig' file, because we look in the build
directory not $(srctree), and so we will call Make again with
'defconfig' as the target. From there we loop infinitely calling 'make
defconfig' again and again.
The fix is simple, we need to look for the file under $(srctree).
Fixes: d2036f30cf ("scripts/kconfig/Makefile: Allow KBUILD_DEFCONFIG to be a target")
Reported-by: Olof Johansson <olof@lixom.net>
Acked-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
merge_config.sh can usefully be applied to a single file.
It implicitly merges with the default configuration.
Signed-off-by: Gabriel de Perthuis <g2p.code@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
All make targets support $KCONFIG_CONFIG because they
run scripts/kconf. Make sure merge_config.sh accesses the
correct file in all cases.
Previously this script broke in two different code paths,
one for targets like kvmconfig (which use merge_config.sh -m
then call a target that respects KCONFIG_CONFIG) and one for
direct use of the script without -m, which called make rules
that edit KCONFIG_CONFIG but verified a different file.
Signed-off-by: Gabriel de Perthuis <g2p.code@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
The buildsystem will now only search for Qt 4 and Qt 5. Support for Qt 2
and 3 was dropped in the previous commits (Qt 3 was EOL'ed in 2010 or
so...).
For Qt 5, to be future-proof with the future direction notice appearing
in the 5.5 release, C++11 support is automatically enabled.
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
ConfigItem executes parent->takeChild(0)
while
ConfigList executes parent->takeTopLevelItem(0)
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Boris Barbulovski <bbarbulovski@gmail.com>
Signed-off-by: Thiago Macieira <thiago.macieira@intel.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Recursive dependency issues with kconfig are unavoidable due to
some limitations with kconfig, since these issues are recurring
provide a hint to the user how they can resolve these dependency
issues and also document why such limitation exists.
While at it also document a bit of future prospects of ways to
enhance Kconfig, including providing formal semantics and evaluation
of use of a SAT solver. If you're interested in this work or prospects
of it check out the kconfig-sat project wiki [0] and mailing list [1].
[0] http://kernelnewbies.org/KernelProjects/kconfig-sat
[1] https://groups.google.com/d/forum/kconfig-sat
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: James Bottomley <jbottomley@odin.com>
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Paul Bolle <pebolle@tiscali.nl>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Mate Soos <soos.mate@gmail.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Arch Makefiles can set KBUILD_DEFCONFIG to tell kbuild the name of the
defconfig that should be built by default.
However currently there is an assumption that KBUILD_DEFCONFIG points to
a file at arch/$(SRCARCH)/configs/$(KBUILD_DEFCONFIG).
We would like to use a target, using merge_config, as our defconfig, so
adapt the logic in scripts/kconfig/Makefile to allow that.
To minimise the chance of breaking anything, we first check if
KBUILD_DEFCONFIG is a file, and if so we do the old logic. If it's not a
file, then we call the top-level Makefile with KBUILD_DEFCONFIG as the
target.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Michal Marek <mmarek@suse.com>
Pull kconfig updates from Michal Marek:
- kconfig warns about junk characters in Kconfig files
- merge_config.sh error handling
- small cleanup
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
merge_config.sh: exit on missing input files
kconfig: Regenerate shipped zconf.{hash,lex}.c files
kconfig: warn of unhandled characters in Kconfig commands
kconfig: Delete unnecessary checks before the function call "sym_calc_value"
Add a check for the existence of input files and exit (with failure)
if they are missing.
Without this additional check, missing files produce error messages
but still result in an output file being generated and a successful
exit code.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
Update the shipped files generated by flex and gperf to support the
explicit use of "---help---" and to emit warnings for unsupported
characters on COMMAND tokens.
As I could not find out which flex/gperf version was used to generate
the previous version, I used flex 2.5.35 and gperf 3.0.4 from
Ubuntu 14.04 - this also leads to the big number of changed lines
in this patch.
Signed-off-by: Andreas Ruprecht <andreas.ruprecht@fau.de>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
Tested-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
In Kconfig, definitions of options take the following form:
"<COMMAND> <PARAM> <PARAM> ...". COMMANDs and PARAMs are treated
slightly different by the underlying parser.
While commit 2e0d737fc7 ("kconfig: don't silently ignore unhandled
characters") introduced a warning for unsupported characters around
PARAMs, it does not cover situations where a COMMAND has additional
characters before it.
This change makes Kconfig emit a warning if superfluous characters
are found before COMMANDs. As the 'help' statement sometimes is
written as '---help---', the '-' character would now also be regarded
as unhandled and generate a warning. To avoid that, '-' is added to
the list of allowed characters, and the token '---help---' is included
in the zconf.gperf file.
Reported-by: Valentin Rothberg <valentinrothberg@gmail.com>
Signed-off-by: Andreas Ruprecht <andreas.ruprecht@fau.de>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
Tested-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.com>
The sym_calc_value() function tests whether its argument is NULL and then
returns immediately. Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Michal Marek <mmarek@suse.com>
In kbuild it is allowed to define objects in files named "Makefile"
and "Kbuild".
Currently localmodconfig reads objects only from "Makefile"s and misses
modules like nouveau.
Link: http://lkml.kernel.org/r/1437948415-16290-1-git-send-email-richard@nod.at
Cc: stable@vger.kernel.org
Reported-and-tested-by: Leonidas Spyropoulos <artafinde@gmail.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Pull kconfig updates from Michal Marek:
- kconfig conditions can use usual less/greater than comparisons
- kconfig warns about stray characters in Kconfig files
- bogus expression simplification removed
- some minor fixes
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kconfig: re-generate *.c_shipped files after previous change
kconfig: allow use of relations other than (in)equality
kconfig: don't silently ignore unhandled characters
kconfig: Wrap long "make help" text lines
scripts/kconfig/Makefile: Cosmetic fixes
scripts/kconfig/Makefile: Fix spelling of Qt
Kconfig: Remove bad inference rules expr_eliminate_dups2()
This lets you build a kernel which can support xen dom0
or xen guests on i386, x86-64 and arm64 by just using:
make xenconfig
You can start from an allnoconfig and then switch to xenconfig.
This also splits out the options which are available currently
to be built with x86 and 'make ARCH=arm64' under a shared config.
Technically xen supports a dom0 kernel and also a guest
kernel configuration but upon review with the xen team
since we don't have many dom0 options its best to just
combine these two into one.
A few generic notes: we enable both of these:
CONFIG_INET=y
CONFIG_BINFMT_ELF=y
although technically not required given you likely will
end up with a pretty useless system otherwise.
A few architectural differences worth noting:
$ make allnoconfig; make xenconfig > /dev/null ; \
grep XEN .config > 64-bit-config
$ make ARCH=i386 allnoconfig; make ARCH=i386 xenconfig > /dev/null; \
grep XEN .config > 32-bit-config
$ make ARCH=arm64 allnoconfig; make ARCH=arm64 xenconfig > /dev/null; \
grep XEN .config > arm64-config
Since the options are already split up with a generic config and
architecture specific configs you anything on the x86 configs
are known to only work right now on x86. For instance arm64 doesn't
support MEMORY_HOTPLUG yet as such although we try to enabe it
generically arm64 doesn't have it yet, so we leave the xen
specific kconfig option XEN_BALLOON_MEMORY_HOTPLUG on x86's config
file to set expecations correctly.
Then on x86 we have differences between i386 and x86-64. The difference
between 64-bit-config and 32-bit-config is you don't get XEN_MCE_LOG as
this is only supported on 64-bit. You also do not get on i386
XEN_BALLOON_MEMORY_HOTPLUG, there does not seem to be any technical
reasons to not allow this but I gave up after a few attempts.
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: penberg@kernel.org
Cc: levinsasha928@gmail.com
Cc: mtosatti@redhat.com
Cc: fengguang.wu@intel.com
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: xen-devel@lists.xenproject.org
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Julien Grall <julien.grall@linaro.org>
Acked-by: Michal Marek <mmarek@suse.cz>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
We'll be adding options for xen as well.
Cc: Josh Triplett <josh@joshtriplett.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: penberg@kernel.org
Cc: levinsasha928@gmail.com
Cc: mtosatti@redhat.com
Cc: fengguang.wu@intel.com
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Ian Campbell <Ian.Campbell@citrix.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: xen-devel@lists.xenproject.org
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Borislav Petkov <bp@suse.de>
Acked-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Over the years I found it desirable to be able to use all sorts of
relations, not just (in)equality. And apparently I'm not the only one,
as there's at least one example in the tree where the programmer
assumed this would work (see DEBUG_UART_8250_WORD in
arch/arm/Kconfig.debug). Another possible use would e.g. be to fold the
two SMP/NR_CPUS prompts into one: SMP could be promptless, simply
depending on NR_CPUS > 1.
A (desirable) side effect of this change - resulting from numeric
values now necessarily being compared as numbers rather than as
strings - is that comparing hex values now works as expected: Other
than int ones (which aren't allowed to have leading zeroes), zeroes
following the 0x prefix made them compare unequal even if their values
were equal.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
At the very least we should tell people that what they wrote is not
what the utility understands.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Some "make help" text lines extend beyond 80 characters. Wrap them at 79
characters.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Michal Marek <mmarek@suse.cz>
expr_eliminate_dups2() in scripts/kconfig/expr.c applies two invalid
inference rules:
(FOO || BAR) && (!FOO && !BAR) -> n
(FOO && BAR) || (!FOO || !BAR) -> y
They would be correct in propositional logic, but this is a three-valued
logic, and here it is wrong in that it changes semantics. It becomes
immediately visible when assigning the value 1 to both, FOO and BAR:
(FOO || BAR) && (!FOO && !BAR)
-> min(max(1, 1), min(2-1, 2-1)) = min(1, 1) = 1
while n evaluates to 0 and
(FOO && BAR) || (!FOO || !BAR)
-> max(min(1, 1), max(2-1, 2-1)) = max(1, 1) = 1
with y evaluating to 2.
Fix it by removing expr_eliminate_dups2() and the functions that have no
use anywhere else: expr_extract_eq_and(), expr_extract_eq_or(),
and expr_extract_eq() from scripts/kconfig/expr.c
Currently the bug is not triggered in mainline, so this patch does not
modify the configuration space there. To observe the bug consider this
example:
config MODULES
def_bool y
option modules
config FOO
def_tristate m
config BAR
def_tristate m
config TEST1
def_tristate y
depends on (FOO || BAR) && (!FOO && !BAR)
if TEST1 = n
comment "TEST1 broken"
endif
config TEST2
def_tristate y
depends on (FOO && BAR) || (!FOO || !BAR)
if TEST2 = y
comment "TEST2 broken"
endif
config TEST3
def_tristate y
depends on m && !m
if TEST3 = n
comment "TEST3 broken"
endif
TEST1, TEST2 and TEST3 should all evaluate to m, but without the patch,
none of them does. It is probably not obvious that TEST3 is the same bug,
but it becomes clear when considering what happens internally to the
expression
m && !m":
First it expands to
(m && MODULES) && !(m && MODULES),
then it is transformed into
(m && MODULES) && (!m || !MODULES),
and finally due to the bug it is replaced with n.
As a side effect, this patch reduces code size in expr.c by roughly 10%
and slightly improves startup time for all configuration frontends.
Signed-off-by: Martin Walch <walch.martin@web.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Add an -s option to the various frontends and pass it when make -s is
used. Also, use $(kecho) instead of @echo in the Makefile.
Signed-off-by: Michal Marek <mmarek@suse.cz>
"scripts/kconfig/merge_config.sh && make oldconfig" works well
enough for merging local config fragments, but Kbuild currently has
the entry points only for "kvmconfig" and "tinyconfig".
This commit provides the generic target for mergeconfig, so we can
manage our own config fragments easily:
put "foo.config" in arch/$(SRCARCH)/configs/ or kernel/configs/,
and then run "make foo.config".
Now "make kvmconfig" is just a shorthand of "make kvm_guest.config".
Likewise, "make tinyconfig" is equivalent to
"make allnoconfig tiny.config".
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The variable "MAKE" is used to store the command name that has
invoked the Makefile. (Actually, it is already set to "make"
if you run this script from a Makefile.)
In this script, however, it is used to determine if Make should be
run or not. It is not what we usually expect.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
It is true that we do not want to move the code too far to the
right, but something like below is not preferred:
if [ "x$PREV_VAL" != "x$NEW_VAL" ] ; then
echo Value of $CFG is redefined by fragment $MERGE_FILE:
echo Previous value: $PREV_VAL
echo New value: $NEW_VAL
echo
elif [ "$WARNREDUN" = "true" ]; then
echo Value of $CFG is redundant by fragment $MERGE_FILE:
fi
To fix this, call "continue" if the "grep" command fails to find the
given CONFIG.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Kbuild always runs in $(objtree). Actually, $(objtree) is always
set to "." by the top-level Makefile.
We can omit "-O $(objtree)" and "$(objtree)/".
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Currently, "make tinyconfig" does not work with "-j" option.
$ make mrproper
$ make -j8 tinyconfig
HOSTCC scripts/basic/fixdep
HOSTCC scripts/kconfig/conf.o
SHIPPED scripts/kconfig/zconf.tab.c
SHIPPED scripts/kconfig/zconf.lex.c
SHIPPED scripts/kconfig/zconf.hash.c
HOSTCC scripts/kconfig/zconf.tab.o
HOSTLD scripts/kconfig/conf
scripts/kconfig/conf --allnoconfig Kconfig
#
# configuration written to .config
#
scripts/kconfig/Makefile:122: *** You need an existing .config
for this target. Stop.
make: *** [tinyconfig] Error 2
As shown above, "allnoconfig" has created the .config file before
mergeconfig is called, but Make still raises a false alarm because
of some sort of race condition.
We can fix this issue by moving the error check to the shell script.
Anyway, scripts/kconfig/merge_config.sh always requires an existing
.config as a base file. It is reasonable to check its existence in
the shell script.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
If "make kvmconfig" is run with "-j" option, a warning message,
"jobserver unavailable: using -j1. Add `+' to parent make rule.",
is displayed.
$ make -s defconfig
*** Default configuration is based on 'x86_64_defconfig'
#
# configuration written to .config
#
$ make -j8 kvmconfig
Using ./.config as base
Merging ./arch/x86/configs/kvm_guest.config
[ snip ]
#
# merged configuration written to ./.config (needs make)
#
make[2]: warning: jobserver unavailable: using -j1. Add `+' to
parent make rule.
scripts/kconfig/conf --oldconfig Kconfig
[ snip ]
#
# configuration written to .config
#
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Josh Triplett <josh@joshtriplett.org>
Reviewed-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
This was originally meant for dlopen()ing a potential kconfig shared
library. The unused dlopen code has already been removed in commit
5a6f8d2b (kconfig: nuke LKC_DIRECT_LINK cruft), so let's remove the
rest. The lkc_proto.h change was made with the following sed script:
sed -r 's/^P\(([^,]*), *([^,]*), *(.*)\);/\2 \1\3;/'
Plus some manual adjustments.
Signed-off-by: Michal Marek <mmarek@suse.cz>
Although on some systems va_end is a no-op, it is good practice
to use va_end, especially since the manual states:
"Each invocation of va_start() must be matched by a corresponding
invocation of va_end() in the same function."
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Two or more arguments are always expected. Show usage and exit if
given less.
Signed-off-by: Olof Johansson <olof@lixom.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Pull kbuild updates from Michal Marek:
"Here are the kbuild changes for v3.19-rc1:
- Cleanups and deduplication in the main Makefile and
scripts/Makefile.*
- Sort the output of *config targets in make help
- Old <linux/version.h> is always removed to avoid a surprise during
bisecting
- Warning fix in kconfig"
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kbuild: remove redundant -rR flag of hdr-inst
kbuild: Fix make help-<board series> on powerpc
kbuild: Automatically remove stale <linux/version.h> file
kconfig: Fix warning "‘jump’ may be used uninitialized"
Makefile: sort list of defconfig targets in make help output
kbuild: Remove duplicate $(cmd) definition in Makefile.clean
kbuild: collect shorthands into scripts/Kbuild.include
Pull perf fixes and cleanups from Ingo Molnar:
"A kernel fix plus mostly tooling fixes, but also some tooling
restructuring and cleanups"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
perf: Fix building warning on ARM 32
perf symbols: Fix use after free in filename__read_build_id
perf evlist: Use roundup_pow_of_two
tools: Adopt roundup_pow_of_two
perf tools: Make the mmap length autotuning more robust
tools: Adopt rounddown_pow_of_two and deps
tools: Adopt fls_long and deps
tools: Move bitops.h from tools/perf/util to tools/
tools: Introduce asm-generic/bitops.h
tools lib: Move asm-generic/bitops/find.h code to tools/include and tools/lib
tools: Whitespace prep patches for moving bitops.h
tools: Move code originally from asm-generic/atomic.h into tools/include/asm-generic/
tools: Move code originally from linux/log2.h to tools/include/linux/
tools: Move __ffs implementation to tools/include/asm-generic/bitops/__ffs.h
perf evlist: Do not use hard coded value for a mmap_pages default
perf trace: Let the perf_evlist__mmap autosize the number of pages to use
perf evlist: Improve the strerror_mmap method
perf evlist: Clarify sterror_mmap variable names
perf evlist: Fixup brown paper bag on "hint" for --mmap-pages cmdline arg
perf trace: Provide a better explanation when mmap fails
...
The calloc() and xcalloc() functions takes @nmemb first and then @size. Fix all w/
pattern "calloc\s*(\s*sizeof".
Signed-off-by: Arjun Sreedharan <arjun024@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1417866043-1877-1-git-send-email-arjun024@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Warning:
In file included from scripts/kconfig/zconf.tab.c:2537:0:
scripts/kconfig/menu.c: In function ‘get_symbol_str’:
scripts/kconfig/menu.c:590:18: warning: ‘jump’ may be used uninitialized in this function [-Wmaybe-uninitialized]
jump->offset = strlen(r->s);
Simplifies the test logic because (head && local) means (jump != 0)
and makes GCC happy when checking if the jump pointer was initialized.
Signed-off-by: Peter Kümmel <syntheticpp@gmx.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
There's no such thing as "list_struct".
Signed-off-by: Andrey Utkin <andrey.krieger.utkin@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Pull kbuild changes from Michal Marek:
- fix for handling dependencies of *-objs targets by Masahiro Yamada
- lots of cleanups in the kbuild machinery, also by Masahiro
- fixes for the kconfig build to use an UTF-8 capable ncurses library
if possible and to build on not-so-standard installs
- some more minor fixes
* 'kbuild' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kbuild: Do not reference *-n variables in the Makefile
kbuild: simplify build, clean, modbuiltin shorthands
kbuild: arm: Do not define "comma" twice
kbuild: remove obj-n and lib-n handling
kbuild: remove unnecessary variable initializaions
kbuild: remove unnecessary "obj- := dummy.o" trick
kbuild: handle C=... and M=... after entering into build directory
kbuild: use $(Q) for sub-make target
kbuild: fake the "Entering directory ..." message more simply
kconfig/lxdialog: get ncurses CFLAGS with pkg-config
kconfig: nconfig: fix multi-byte UTF handling
kconfig: lxdialog: fix spelling
kbuild: Make scripts executable
kbuild: remove redundant clean-files from scripts/kconfig/Makefile
kbuild: refactor script/kconfig/Makefile
kbuild: handle the dependency of multi-objs hostprogs appropriately
kbuild: handle multi-objs dependency appropriately
This makes "make menuconfig" also work on systems where ncurses is not
installed in a standard location (such as on NixOS).
This patch changes ccflags() so that it tries pkg-config first, and only
if pkg-config fails does it go back to the fallback/manual checks. This
is the same algorithm that ldflags() already uses.
Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Currently, Kconfig descriptions that use multi-byte UTF-8 characters
(such as MTD_NAND_CAFE) will have their menu entries dropped from the
'make nconfig' ncurses menu, and all subsequent entries in the same
window will be omitted. This seems to be due to the ncurses 'menu'
library, which does not traditionally handle UTF-8 >8-bit characters
properly.
The ncursesw library ('w' is for "wide") is written to handle these
UTF-8 characters, and is practically a drop-in replacement at the source
level. Use it by default, if available.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=43067
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Martin Walch <walch.martin@web.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
The Makefiles call the respective interpreter explicitly, but this makes
it easier to use the scripts manually.
Signed-off-by: Michal Marek <mmarek@suse.cz>
Now mconf, qconf, gconf, nconf are always added to hostprogs-y.
Files added to hostprogs-y are removed by "make clean".
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Now it is harmless to add all host programs to hostprogs-y.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Since commit 5d2acfc7b9 ("kconfig: make
allnoconfig disable options behind EMBEDDED and EXPERT") in 3.15-rc1,
"make allnoconfig" disables every possible config option.
However, a few configuration options (CC_OPTIMIZE_FOR_SIZE,
OPTIMIZE_INLINING) produce a smaller kernel when turned on, and a few
choices exist (compression, highmem, allocator) for which a non-default
option produces a smaller kernel.
Add a "tinyconfig" option, which starts from allnoconfig and then sets
these options to configure the tiniest possible kernel. This provides a
better baseline for embedded systems or efforts to reduce kernel size.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
The new mergeconfig helper makes it easier to add other partial
configurations similar to kvmconfig. Architecture-independent portions
of those partial configurations should go in
kernel/configs/${name}.config, and architecture-dependent portions
should go in arch/${arch}/configs/${name}.config.
Based on a patch by Luis R. Rodriguez <mcgrof@suse.com>.
Originally-Signed-off-by: Luis R. Rodriguez <mcgrof@suse.com>
Modified to make the helper name more general than just virtualization,
support architecture-dependent and architecture-independent partial
configurations, move the helper and kvmconfig to
scripts/kconfig/Makefile, and factor out more of the common file path.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Pull kbuild misc updates from Michal Marek:
"This is the non-critical part of kbuild for v3.16-rc1:
- make deb-pkg can do s390x and arm64
- new patterns in scripts/tags.sh
- scripts/tags.sh skips userspace tools' sources (which sometimes
have copies of kernel structures) and symlinks
- improvements to the objdiff tool
- two new coccinelle patches
- other minor fixes"
* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
scripts: objdiff: support directories for the augument of record command
scripts: objdiff: fix a comment
scripts: objdiff: change the extension of disassembly from .o to .dis
scripts: objdiff: improve path flexibility for record command
scripts: objdiff: remove unnecessary code
scripts: objdiff: direct error messages to stderr
scripts: objdiff: get the path to .tmp_objdiff more simply
deb-pkg: Add automatic support for s390x architecture
coccicheck: Add unneeded return variable test
kbuild: Fix a typo in documentation
kbuild: trivial - use tabs for code indent where possible
kbuild: trivial - remove trailing empty lines
coccinelle: Check for missing NULL terminators in of_device_id tables
scripts/tags.sh: ignore symlink'ed source files
scripts/tags.sh: add regular expression replacement pattern for memcg
builddeb: add arm64 in the supported architectures
builddeb: use $OBJCOPY variable instead of objcopy
scripts/tags.sh: ignore code of user space tools
scripts/tags.sh: add pattern for DEFINE_HASHTABLE
.gitignore: ignore Module.symvers in all directories
The directory include/config is used only for
silentoldconfig, localmodconfig, localyesconfig.
Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
"make allnoconfig" exists to ease testing of minimal configurations.
Documentation/SubmitChecklist includes a note to test with allnoconfig.
This helps catch missing dependencies on common-but-not-required
functionality, which might otherwise go unnoticed.
However, allnoconfig still leaves many symbols enabled, because they're
hidden behind CONFIG_EMBEDDED or CONFIG_EXPERT. For instance, allnoconfig
still has CONFIG_PRINTK and CONFIG_BLOCK enabled, so drivers don't
typically get build-tested with those disabled.
To address this, introduce a new Kconfig option "allnoconfig_y", used on
symbols which only exist to hide other symbols. Set it on CONFIG_EMBEDDED
(which then selects CONFIG_EXPERT). allnoconfig will then disable all the
symbols hidden behind those.
Signed-off-by: Josh Triplett <josh@joshtriplett.org>
Tested-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently localmodconfig will miss dependencies from the default option.
For example:
config FOO
default y if BAR || ZOO
If FOO is needed for a module and is set to '=m', and so are BAR or ZOO,
localmodconfig will not see that BOO or ZOO are also needed for the foo
module, and will incorrectly disable them.
Link: http://lkml.kernel.org/r/20131218175137.162937350@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Currently the qconf program invoked by 'make xconfig' stores GUI
settings in the file ~/.config/Unknown\ Organization.conf. This name
is apparently generated by the QSettings class when no organisation
or application name are specified.
This is obviously not a sensible filename (nor does it seem sensible
that these QSettings parameters are optional!). Pass the names
'kernel.org' and 'qconf', resuling in the filename
~/.config/kernel.org/qconf.conf.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The struct gstr has a capacity that may differ from the actual string length.
However, a string manipulation in the function search_conf made the assumption
that it is the same, which led to messing up some search results, especially
when the content of the gstr in use had not yet reached at least 63 chars.
Signed-off-by: Martin Walch <walch.martin@web.de>
Acked-by: Wang YanQing <udknight@gmail.com>
Acked-by: Benjamin Poirier <bpoirier@suse.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The definition ws [ \n\t] is not used anywhere. Drop it to avoid confusion.
As it is a dead definition, any changes in the resulting code generated by
flex would be surprising (actually testing this showed that there are really
no changes). So, there is no need to touch the existing zconf.lex.c_shipped.
Signed-off-by: Martin Walch <walch.martin@web.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN: <yann.morin.1998@free.fr>
Each symbol must have exactly one type assigned. However, if a symbol happens
to have two different types assigned at runtime, a warning is printed and the
first type is preserved while the second type is being ignored.
The warning message says
type of <symbol name> redefined from <first type> to <second type>
which may be misleading as it may create the impression that the second type
replaces the first type.
This patch clarifies this by changing the warning to
ignoring type redefinition of <symbol name> from <first type> to <second type>
Signed-off-by: Martin Walch <walch.martin@web.de>
Acked-by: Wang YanQing <udknight@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This fixes lots of typos in comments and strings.
It also updates the documentation strings in mconf to reflect the changes in
the user interface from the two commits
6364fd0cb1
menuconfig: Add Save/Load buttons
1bdbac478a
menuconfig: Get rid of the top-level entries for "Load an Alternate/Save an Alternate"
And it updates the layout of the example search result, i. e. moves down the
"Defined at" and "Depends on" lines and adds a symbol state ([=n]) to the
symbol in the "Selected by" line.
Furthermore, the help texts now should fit in 80 columns again when viewed
in mconf.
Signed-off-by: Martin Walch <walch.martin@web.de>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
replace the question mark in the comment after SYMBOL_WRITE with an explanation
Signed-off-by: Martin Walch <walch.martin@web.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Previously, it was possible to have more than one symbol with the
'option modules' attached to them, although only the last one would
in fact control tristates.
Since this does not make much sense, only allow at most one symbol to
control tristates.
Note: it is still possible to have more than one symbol that control
tristates, but indirectly:
config MOD1
bool "mod1"
select MODULES
config MOD2
bool "mod2"
select MODULES
config MODULES
bool
option modules
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Regenerate bison parser after changes made in:
6902dcc: kconfig: do not special-case 'MODULES' symbol
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Currently, the 'MODULES' symbol is hard-coded to be the default symbol
that enables/disables tristates, if no other symbol was declared with
'option modules'.
While this used to be needed for the Linux kernel, we now have an
explicit 'option modules' attached to the 'MODULES' symbol (since
cset 11097a036), so we no longer need to special-case it in the
kconfig code.
Furthermore, kconfig is extensively used out of the Linux kernel, and
other projects may have another meaning for a symbol named 'MODULES'.
This patch changes the way we enable/disable tristates: if a symbol was
found with 'option modules' attached to it, then that symbol controls
enabling tristates. Otherwise, tristates are disabled, even if a symbol
named 'MODULES' exists.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
When a symbol changes type from tristate to bool, and was previously set to
'm', a subsequent silentoldconfig would warn about inconsistency, such as:
include/config/auto.conf:3014:warning: symbol value 'm' invalid for
HOTPLUG_PCI_PCIE
Seen by Linus with the merge in aa8032b (sequence to reproduce by Michal):
git checkout 1fe0135
make mrproper
make allmodconfig
make silentoldconfig
git checkout aa8032b
make allmodconfig
make silentoldconfig
Since HOTPLUG_PCI_PCIE changed from tristate to bool in aa8032b, it was
previously set to 'm' in auto.conf by the first allmodconfig+silentoldconfig,
but then was set to 'y' by the second allmodconfig. Then the second
silentoldconfig prints the warning.
The warning in this case is a spurious warning, which happens at the time
kconfig tries to detect symbols that have changed, to touch the empty
header files in include/config used for dependency-tracking by make.
Silence the warning when we read the old auto.conf file, since it is
perfectly legit that a symbol changed type since the previous call.
Thread in:
http://marc.info/?l=linux-pci&m=137569198904000&w=2
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Instead of using "long" for kconfig "hex" and "range" values, which may
change in size depending on the host architecture, use "long long". This
will allow values greater than INT_MAX on 32-bit hosts when cross
compiling.
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
There is no need for a double indirection in the temporary array that
stores the internediate search results.
Reported-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
The temporary array that stores the search results is not NULL-terminated,
so there is no reason to allocate n+1 elements.
Reported-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Two minor style fixes:
- no space before/after parenthesis in function definition
- no {} for single-line if()
And one grammar fix in a comment.
Reported-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
No need to repeat the 'CONFIG_' string in the title,
once is explicit enough.
Reported-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jean Delvare <jdelvare@suse.de>
Calls to strlen are costly, so avoid calling strln as much as we can.
Reported-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Pull kconfig updates from Michal Marek:
- dependency solver fix for make defconfig
- randconfig fixes, one of which had to be reverted again
- more user-friendly sorting of search results
- hex and range keywords support longs
- fix for [mn]conf not to rely on particular behavior of the LINES and
COLS variables
- cleanup of magic constants in kconfig/lxdialog
- [mn]conf formatting fixes
- fix for scripts/config's help text in out-of-tree usage (under a
different name)
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kconfig: allow "hex" and "range" to support longs
Revert "kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG"
kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG
kconfig: loop as long as we changed some symbols in randconfig
kconfig/[mn]conf: make it explicit in the search box that a regexp is possible
kconfig: sort found symbols by relevance
kconfig/conf: print the seed used to initialise the RNG for randconfig
kconfig/conf: accept a base-16 seed for randconfig
kconfig/conf: fix randconfig setting multiple symbols in a choice
scripts/config: replace hard-coded script name by a dynamic value
mconf/nconf: mark empty menus/menuconfigs different from non-empty ones
nconf: use function calls instead of ncurses' variables LINES and COLS
mconf: use function calls instead of ncurses' variables LINES and COLS
kconfig/lxdialog: handle newline characters in print_autowrap()
kconfig/lxdialog: Use new mininimum resize definitions in conf_choice()
kconfig/lxdialog: Add definitions for mininimum (re)size values
kconfig: Fix defconfig when one choice menu selects options that another choice menu depends on
The parsing routines for Kconfig files use strtol(), but store and
render values as int. Switch types and formating to long to support a
wider range of values. For example, 0x80000000 wasn't representable.
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This reverts commit 8357b48549.
It breaks more stuff than it fixes.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Reported-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Fengguang Wu <fengguang.wu@intel.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: Alexandre Bounine <alexandre.bounine@idt.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Currently, randconfig does randomise choice entries, unless KCONFIG_ALLCONFIG
is specified.
For example, given those two files (Thomas' test-case):
---8<--- Config.test.in
config OPTIONA
bool "Option A"
choice
prompt "This is a choice"
config CHOICE_OPTIONA
bool "Choice Option A"
config CHOICE_OPTIONB
bool "Choice Option B"
endchoice
config OPTIONB
bool "Option B"
---8<--- Config.test.in
---8<--- config.defaults
CONFIG_OPTIONA=y
---8<--- config.defaults
And running:
./scripts/kconfig/conf --randconfig Config.test.in
does properly randomise the two choice symbols (and the two booleans).
However, running:
KCONFIG_ALLCONFIG=config.defaults \
./scripts/kconfig/conf --randconfig Config.test.in
does *not* reandomise the two choice entries, and only CHOICE_OPTIONA
will ever be selected. (OPTIONA will always be set (expected), and
OPTIONB will be be properly randomised (expected).)
This patch defers setting that a choice has a value until a symbol for
that choice is indeed set, so that choices are properly randomised when
KCONFIG_ALLCONFIG is set, but not if a symbol for that choice is set.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
---
Changes v3 -> v4
- fix previous issue where some choices would not be set, which would
cause silentoldconfig to ask for them and was then breaking this
workflow (as reported by Arnd and Sedat):
KCONFIG_ALLCONFIG=foo.defconfig make randconfig
make silentoldconfig </dev/nullo
which I have tested (3h28min!) with:
touch defconfig
for(( i=0; i<10000; i++ )); do
KCONFIG_ALLCONFIG=$(pwd)/defconfig make randconfig >/dev/null 2>&1
make silentoldconfig </dev/null >/dev/null 2>&1 || break
done
which did not break at all.
- change done in v3 (below) is already fixed by a previous patch
Changes v2 -> v3
- ensure only one symbol is set in a choice
Changes v1 -> v2:
- further postpone setting that a choice has a value until
one is indeed set
- do not print symbols that are part of an invisible choice
Because of choice-in-a-choice constructs, it can happen that not all
symbols are assigned a value during randconfig, leading in rare cases
to this situation:
---8<--- choice-in-choice.in
choice
bool "A/B/C"
config A
bool "A"
config B
bool "B"
if B
choice
bool "E/F"
config E
bool "E"
config F
bool "F"
endchoice
endif # B
config C
bool "C"
endchoice
---8<---
$ ./scripts/kconfig/conf --randconfig choice-in-choice.in
[--SNIP--]
$ ./scripts/kconfig/conf --silentoldconfig choice-in-choice.in </dev/null
[--SNIP--]
A/B/C
1. A (A)
> 2. B (B)
3. C (C)
choice[1-3]: 2
E/F
> 1. E (E) (NEW)
2. F (F) (NEW)
choice[1-2]: aborted!
Console input/output is redirected. Run 'make oldconfig' to update
configuration.
Fix this by looping in randconfig for as long as some symbol gets assigned
a value.
Note: this was spotted with the USB EHCI Debug Device Gadget (USB_G_DBGP),
which uses this choice-in-a-choice construct, and exhibits this problem.
The example above is just a stripped-down minimalist test-case.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reported-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Michal Marek <mmarek@suse.cz>
When searching for symbols, return the symbols sorted by relevance.
Sorting is done as thus:
- first, symbols that match exactly
- then, alphabetical sort
Since the search can be a regexp, it is possible that more than one symbol
matches exactly. In this case, we can't decide which to sort first, so we
fallback to alphabeticall sort.
Explain this (new!) sorting heuristic in the documentation.
Reported-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jean Delvare <jdelvare@suse.de>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Roland Eggner <edvx1@systemanalysen.net>
Cc: Wang YanQing <udknight@gmail.com>
--
Changes v1->v2:
- drop the previous, complex heuristic in favour of a simpler heuristic
that is both easier to understand, *and* to maintain (Jean)
- explain sorting heuristic in the doc (Jean)
Currently, randconfig may set more than one symbol in a given choice.
Given this config file:
config A
bool "A"
if A
choice
bool "B/C/D"
config B
bool "B"
config C
bool "C"
config D
bool "D"
endchoice
endif # A
Then randconfig generates such .config files (case where A is not set is not
shown below for brevity), and where only the right-most .config is valid:
CONFIG_A=y CONFIG_A=y CONFIG_A=y
CONFIG_B=y CONFIG_B=y CONFIG_B=y
CONFIG_C=y # CONFIG_C is not set # CONFIG_C is not set
# CONFIG_D is not set CONFIG_D=y # CONFIG_D is not set
That is, in a randomised choice, the first symbol is always selected,
and at most one other symbol may be selected.
This is due to symbol randomised in a choice not being properly flagged
as having a value.
Fix that by flagging those symbols adequately: have a user-defined value,
and be not valid (to force recalculation of the symbol).
Note: if the choice is not conditional, then the randomisation is properly
done.
Reported-by: Matthieu CASTET <matthieu.castet@parrot.com>
Signed-off-by: Matthieu CASTET <matthieu.castet@parrot.com>
[yann.morin.1998@free.fr: independently re-done the same patch as Matthieu,
as pointed out by Sedat]
Cc: Arnaud Lacombe <lacombar@gmail.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Submenus are sometimes empty and it would be nice if there is
something that notifies us that we should not expect any content
_before_ we enter a submenu.
A new function menu_is_empty() was introduced and empty menus and
menuconfigs are now marked by "----" as opposed to non-empty ones that
are marked by "--->".
This scheme was suggested by "Yann E. MORIN" <yann.morin.1998@free.fr>.
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
According to the documentation [1], LINES and COLS are initialized by
initscr(); it does not say anything about the behavior when windows are
resized.
Do not rely on the current implementation of ncurses that updates
these variables on resize, but use the propper function calls or macros
to get window dimensions.
The use of the variables in main() was OK, but for the sake of
consistency it was modified to use the macro getmaxyx().
[1] ncurses(3X)
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: declare 'lines' and 'columns' on a single line]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
According to the documentation [1], LINES and COLS are initialized by
initscr(); it does not say anything about the behavior when windows are
resized.
Do not rely on the current implementation of ncurses that updates
these variables on resize, but use the propper function calls to get
window dimensions.
init_dialog() could make use of the variables, but for the sake of
consistency we do not change it's current use of the macro getmaxyx().
[1] ncurses(3X)
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When exiting menuconfig with unsaved changes, a dialog like
the following is shown:
Do you wish to save your new configuration ? <ESC><ESC>
to continue.
The author of the dialog text specified a newline after the '?',
and probably expected it to be processed, so let print_autowrap()
handle newlines propperly.
Also, reword that dialog's second phrase with a real sentence.
Signed-off-by: Dirk Gouders <dirk@gouders.net>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: very slightly tweak the commit message]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is a cleanup which uses the proper (new) definitions and does
not change current behaviour.
Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
---
Yann had some more ideas on improvements:
"What would be nice is an improvement that scales the choice window to
the number of entries in the choice. If there are a lot of choice
entries, then the choice popup grows in height (but does not overflow
the screen of course). So, instead of seeing only 6 entries, we'd see
as much as possible in the current screen.
Ditto for the width: the popup adapts to the longest prompt (but does
not overflow the screen either, of course), so prompts are not
truncated."
NOTE: This patch requires [1].
[1] http://marc.info/?l=linux-kbuild&m=137128726917166&w=2
Commit c8dc68ad0f ("kconfig/lxdialog: support resize") added support
for resizing, but forgot to collect all hardcoded values at one single
place.
Also add a definition for the check for a minimum screen/window size
of 80x19.
[ ChangeLog v3:
* Rename MENU_{HEIGTH,WIDTH}_MIN -> MENUBOX_{HEIGTH,WIDTH}_MIN
ChangeLog v2:
* Rename WIN_{HEIGTH,WIDTH}_MIN -> WINDOW_{HEIGTH,WIDTH}_MIN
* Mention the check for a minimum screen/window size in the changelog
* Add a comment above the block of new definitions ]
Signed-off-by: Sedat Dilek <sedat.dilek@gmail.com>
Acked-by: Wang YanQing <udknight@gmail.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
menu_add_prop() applies upper menus' visibilities to actual prompts
by AND-ing the prompts visibilities with the upper menus ones.
This creates a further reference to the menu's visibilities and when
the expression reduction functions do their work, they may remove or
modify expressions that have multiple references, thus causing
unpredictable side-effects.
The following example Kconfig constructs a case where this causes
problems: a menu and a prompt which's visibilities depend on the same
symbol. When invoking mconf with this Kconfig and pressing "Z" we
see a problem caused by a free'd expression still referenced by the
menu's visibility:
------------------------------------------------------------------------
mainmenu "Kconfig Testing Configuration"
config VISIBLE
def_bool n
config Placeholder
bool "Place holder"
menu "Invisible"
visible if VISIBLE
config TEST_VAR
bool "Test option" if VISIBLE
endmenu
------------------------------------------------------------------------
This patch fixes this problem by creating copies of the menu's
visibility expressions before AND-ing them with the prompt's one.
Signed-off-by: Dirk Gouders <dirk@gouders.net>
[yann.morin.1998@free.fr: move variable into its block-scope,
keep lines <80 chars, typo]
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
When entering an empty dialog, using the movement keys resulted in
unexpected characters beeing displayed, other keys like "z" and "h"
did not work as expected.
This patch handles the movement keys as well as other keys, especially
"z", "h" and "/".
Signed-off-by: Dirk Gouders <dirk@gouders.net>
[yann.morin.1998@free.fr: keep lines <80 chars, so reorder test]
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Pull kconfig updates from Michal Marek:
- use pkg-config to detect curses libraries
- clean up the way curses headers are searched
- Some randconfig fixes, of which one had to be reverted
- KCONFIG_SEED for randconfig debugging
- memuconfig memory leak plugged
- menuconfig > breadcrumbs > navigation
- xconfig compilation fix
- Other minor fixes
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild:
kconfig: fix lists definition for C++
Revert "kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG"
kconfig: implement KCONFIG_PROBABILITY for randconfig
kconfig: allow specifying the seed for randconfig
kconfig: fix randomising choice entries in presence of KCONFIG_ALLCONFIG
kconfig: do not override symbols already set
kconfig: fix randconfig tristate detection
kconfig/lxdialog: rationalise the include paths where to find {.n}curses{,w}.h
menuconfig: Add "breadcrumbs" navigation aid
menuconfig: Fix memory leak introduced by jump keys feature
merge_config.sh: Avoid creating unnessary source softlinks
kconfig: optionally use pkg-config to detect ncurses libs
menuconfig: optionally use pkg-config to detect ncurses libs
Searching for PPC_EFIKA results in a segmentation fault, and it's
because get_symbol_prop() returns NULL.
In this case CONFIG_PPC_EFIKA is defined in arch/powerpc/platforms/
52xx/Kconfig, so it won't be parsed if ARCH!=PPC, but menuconfig knows
this symbol when it parses sound/soc/fsl/Kconfig:
config SND_MPC52xx_SOC_EFIKA
tristate "SoC AC97 Audio support for bbplan Efika and STAC9766"
depends on PPC_EFIKA
This bug was introduced by commit bcdedcc1af ("menuconfig: print more
info for symbol without prompts").
Reported-and-tested-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Li Zefan <lizefan@huawei.com>
Tested-by: Libo Chen <libo.chen@huawei.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When we search a config symbol, if it has no prompt the position of this
symbol in the Kconfig file and it's dependencies are not printed. This
can be inconvenient, especially when it's set to n and we want to find out
why.
the following is an example:
before:
Symbol: GENERIC_SMP_IDLE_THREAD [=y]
Type : boolean
Selected by: X86 [=y]
after:
Symbol: GENERIC_SMP_IDLE_THREAD [=y]
Type : boolean
Defined at arch/Kconfig:213
Selected by: X86 [=y]
Signed-off-by: Weng Meiling <wengmeiling.weng@huawei.com>
Signed-off-by: Libo Chen <libo.chen@huawei.com>
Cc: Michal Marek <mmarek@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
A bug was reported that caused localmodconfig to not keep all the
dependencies of ATH9K. This was caused by the kconfig file:
In drivers/net/wireless/ath/Kconfig:
---
if ATH_CARDS
config ATH_DEBUG
bool "Atheros wireless debugging"
---help---
Say Y, if you want to debug atheros wireless drivers.
Right now only ath9k makes use of this.
source "drivers/net/wireless/ath/ath5k/Kconfig"
source "drivers/net/wireless/ath/ath9k/Kconfig"
source "drivers/net/wireless/ath/carl9170/Kconfig"
source "drivers/net/wireless/ath/ath6kl/Kconfig"
source "drivers/net/wireless/ath/ar5523/Kconfig"
source "drivers/net/wireless/ath/wil6210/Kconfig"
endif
---
The current way kconfig works, it processes new source files after the
first file is completed. It creates an array of new source config files
and when the one file is finished, it continues with the next file.
Unfortunately, this means that it loses the fact that the source file is
within an "if" statement, and this means that each of these source file's
configs will not have the proper dependencies set.
As ATH9K requires ATH_CARDS set, the localmodconfig did not see that
dependency, and did not enable ATH_CARDS. When the oldconfig was run, it
forced ATH9K to be disabled.
Link: http://lkml.kernel.org/r/alpine.DEB.2.02.1304291022320.9234@oneiric
Cc: stable@vger.kernel.org # 3.8+
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Tested-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
When a config for a module is added to the list to save in the final
config file, add a print to show what dependencies are used. This is
useful to debug when a config is disabled by the make oldconfig after
localmodconfig is finished.
This print only appears if the environment variable LOCALMODCONFIG_DEBUG
is defined.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
The C++ compiler is more strict in that it refuses to assign
a void* to a struct list_head*.
Fix that by explicitly casting the poisonning constants.
(Tested with all 5 frontends, now.)
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Benjamin Poirier <bpoirier@suse.de>
Currently the odds to set each symbol is (rounded):
booleans: y: 50% n: 50%
tristates: y: 33% m: 33% n: 33%
Introduce a KCONFIG_PROBABILITY environment variable to tweak the
probabilities (in percentage), as such:
KCONFIG_PROBABILITY y:n split yⓂ️n split
-----------------------------------------------------------------
[1] unset or empty 50 : 50 33 : 33 : 34
[2] N N : 100-N N/2 : N/2 : 100-N
N:M N+M : 100-(N+M) N : M : 100-(N+M)
N:M:L N : 100-N M : L : 100-(M+L)
[1] The current behaviour is kept as default, for backward compatibility
[2] The solution initially implemented by Peter for Buildroot, see:
http://git.buildroot.org/buildroot/commit/?id=3435c1afb5
Signed-off-by: Peter Korsgaard <jacmet@uclibc.org>
[yann.morin.1998@free.fr: add to Documentation/]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
For reproducibility, it can be useful to be able to specify the
seed to use to seed the RNG.
Add a new KCONFIG_SEED environment variable which can be set to
the seed to use:
$ make KCONFIG_SEED=42 randconfig
$ sha1sum .config
70a128c8dcc61303069e1be352cce64114dfcbca .config
$ make KCONFIG_SEED=42 randconfig
$ sha1sum .config
70a128c8dcc61303069e1be352cce64114dfcbca .config
It's very usefull for eg. debugging the kconfig parser.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Currently, randconfig does randomise choice entries, unless KCONFIG_ALLCONFIG
is specified.
For example, given those two files (Thomas' test-case):
---8<--- Config.test.in
config OPTIONA
bool "Option A"
choice
prompt "This is a choice"
config CHOICE_OPTIONA
bool "Choice Option A"
config CHOICE_OPTIONB
bool "Choice Option B"
endchoice
config OPTIONB
bool "Option B"
---8<--- Config.test.in
---8<--- config.defaults
CONFIG_OPTIONA=y
---8<--- config.defaults
And running:
./scripts/kconfig/conf --randconfig Config.test.in
does properly randomise the two choice symbols (and the two booleans).
However, running:
KCONFIG_ALLCONFIG=config.defaults \
./scripts/kconfig/conf --randconfig Config.test.in
does *not* reandomise the two choice entries, and only CHOICE_OPTIONA
will ever be selected. (OPTIONA will always be set (expected), and
OPTIONB will be be properly randomised (expected).)
This patch defers setting that a choice has a value until a symbol for
that choice is indeed set, so that choices are properly randomised when
KCONFIG_ALLCONFIG is set, but not if a symbol for that choice is set.
Also, as a side-efect, this patch fixes the following case:
---8<---
choice
config OPTION_A
bool "Option A"
config OPTION_B
bool "Option B"
config OPTION_C
bool "Option C"
endchoice
---8<---
which could previously generate such .config files:
---8<--- ---8<---
CONFIG_OPTION_A=y CONFIG_OPTION_A=y
CONFIG_OPTION_B=y # CONFIG_OPTION_B is not set
# CONFIG_OPTION_C is not set CONFIG_OPTION_C=y
---8<--- ---8<---
Ie., the first entry in a choice is always set, plus zero or one of
the other options may be set.
This patch ensures that only one option may be set for a choice.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Michal Marek <mmarek@suse.cz>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Arnaud Lacombe <lacombar@gmail.com>
---
Changes v2 -> v3
- ensure only one symbol is set in a choice
Changes v1 -> v2:
- further postpone setting that a choice has a value until
one is indeed set
- do not print symbols that are part of an invisible choice
For randconfig, if a list of required symbols is specified with
KCONFIG_ALLCONFIG, such symbols do not "have a value" as per
sym_has_value(), but have the "valid" flag set.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Because the modules' symbole (CONFIG_MODULES) may not yet be set when
we check a symbol's tristate capabilty, we'll always find that tristate
symbols are booleans, even if we randomly decided that to enable modules:
sym_get_type(sym) always return boolean for tristates when modules_sym
has not been previously set to 'y' *and* its value calculated *and* its
visibility calculated, both of which only occur after we randomly assign
values to symbols.
Fix that by looking at the raw type of symbols. Tristate set to 'm' will
be promoted to 'y' when their values will be later calculated.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The current code does this:
if [ -f /usr/include/ncursesw/curses.h ]; then
echo '-I/usr/include/ncursesw -DCURSES_LOC="<ncursesw/curses.h>"'
elif [ -f /usr/include/ncurses/ncurses.h ]; then
echo '-I/usr/include/ncurses -DCURSES_LOC="<ncurses.h>"'
elif [ -f /usr/include/ncurses/curses.h ]; then
echo '-I/usr/include/ncurses -DCURSES_LOC="<ncurses/curses.h>"'
[...]
This is merely inconsistent:
- adding the full path to the directory in the -I directive,
- especially since that path is already a sub-path of the system
include path,
- and then repeating the sub-path in the #include directive.
Rationalise each include directive:
- only use the filename in the #include directive,
- keep the -I directives: they are always searched for before the
system include path; this ensures the correct header is used.
Using the -I directives and the filename-only in #include is more in
line with how pkg-config behaves, eg.:
$ pkg-config --cflags ncursesw
-I/usr/include/ncursesw
This paves the way for using pkg-config for CFLAGS, too, now we use it
to find the libraries.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Displays a trail of the menu entries used to get to the current menu.
Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: small, trivial code re-ordering]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Fixes the memory leak of struct jump_key allocated in get_prompt_str()
Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: stable@vger.kernel.org
Viresh noticed when using merge_config.sh that a source softlink
was being created even when he didn't specify the -O option.
The problem arises due to the previous commit 409f117e2d
which added the -O option. Basically if -O is not specified,
we still pass '-O=.' to the make command, which then generates
a source softlink to ./
This patch adds an extra check so if there is no -O specified
to merge_config.sh, we don't pass one on to make.
Cc: Zhangfei Gao <zhangfei.gao@linaro.org>
Cc: Bruce Ashfield <bruce.ashfield@windriver.com>
Acked-by: Darren Hart <dvhart@linux.intel.com>
Reported-and-tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Michal Marek <mmarek@suse.cz>
When building ncurses with --with-termlib several symbols get moved from
libncurses.so to libtinfo.so. Thus when linking with libncurses.so, one
additionally needs to link with libtinfo.so.
The ncurses pkg-config module will be used to detect the necessary libs for
linking. If not available the old way of directly specifying libs will be
used.
Signed-off-by: Justin Lecher <jlec@gentoo.org>
[yann.morin.1998@free.fr: fix typo: '-ncurses' --> '-lncurses']
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
When building ncurses with --with-termlib several symbols get moved from
libncurses.so to libtinfo.so. Thus when linking with libncurses.so, one
additionally needs to link with libtinfo.so.
The ncurses pkg-config module will be used to detect the necessary libs for
linking. If not available the old heuristic for detection of the ncurses libs
will be used.
Signed-off-by: Justin Lecher <jlec@gentoo.org>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
According to Documentation/kbuild/kconfig.txt, the commands:
yes "" | make oldconfig >conf.new
grep "(NEW)" conf.new
should list the new config symbols with their default values.
However, currently there is no line break after each new symbol. When
kconfig is interactive the user will type a new-line at this point,
but when non-interactive kconfig must print it.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Reference: http://bugs.debian.org/636029
[regid23@nt1.in: Adjusted Ben's work to apply cleanly to this tree]
Reported-and-tested-by: Regid Ichira <regid23@nt1.in>
Reviewed-by: Jonathan Nieder <jrnieder@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
>From: Roland Eggner <edvx1@systemanalysen.net>
More reasonable labels of function keys line. Rename labels and keep menu
width, as required for fitting on COLUMNS=80 terminals:
• s/Insts/Help 2/
• s/Config/ShowAll/
Signed-off-by: Roland Eggner <edvx1@systemanalysen.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
>From: Roland Eggner <edvx1@systemanalysen.net>
Rewrite all help texts. During several years lazy (incomplete) updates have
left behind a rather thick layer of dust. Intentions:
(1) Global help called by <F1> should document all _currently_ implemented
keybindings.
(2) Different help texts called by <F3> resp. <F8><F1> should be consistent
with (1) and with implementation:
• on plain menu entry
• in radiolist window
• in input windows for text, decimal or hexadecimal values
• in filename selection windows <F6> <F7>
• SymSearch specific help called by <F8> followed by <F1>
(3) More reasonable window titles:
Rename window title s/README/Global help/
Rename variable s/nconf_readme/nconf_global_help/
Rename window title s/Instructions/Short help/
(4) Consider which hints are most useful for first-time-users.
Signed-off-by: Roland Eggner <edvx1@systemanalysen.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: a few additional fixes]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
When using make xconfig, the following compilation error appears :
/usr/include/qt3/qvaluelist.h:427:13: error: ‘ptrdiff_t’ does not name a type
Including stddef.h in scripts/kconfig/qconf.cc permits to avoid this error.
Signed-off-by: Tiana Rakotovao Andriamahefa <rkmahefa@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
• In function keys line descriptions black on darkblue are almost
impossible to read. Change colors to black on brown.
Signed-off-by: Roland Eggner <edvx1@systemanalysen.net>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Now we have Load/Save buttons to do the Load/Save
in the convenient place, so we can drop the
top-level entries.
Signed-off-by: Wang YanQing <udknight@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
If menuconfig have Save/Load button like alternative
.config editors, xconfig, nconfig, etc.We will have
a obvious benefit when use menuconfig just like
when we use others, we can Save/Load our .config quickly
and conveniently.
This patch add the Save/Load button for menuconfig.
[remove trailing space while at it for below line:
"*) Formerly when I used Page Down and Page Up, the cursor would be set"
]
Changes:
V1-V2:
1:use PATH_MAX instead of hard code suggested by Yann E. MORIN
2:drop the spurious empty-line removal suggested by Yann E. MORIN
V2-V3:
1:ajust buttons position well centered reported by Yann E. MORIN
Signed-off-by: Wang YanQing <udknight@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
dialog.h has two line the same below:
extern char dialog_input_result[];
This patch remove one of them.
Signed-off-by: Wang YanQing <udknight@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This patch add support navigate input position *inside* the input
field with LEFT/RIGHT, so it is possible to modify the text in place.
Signed-off-by: Wang YanQing <udknight@gmail.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Now that we get the CONFIG_ prefix from the environment, we must
ensure we use the proper prefix in case the user has it set in
the environment.
Simply unexport CONFIG_ to fallback to our hard-coded default.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Masahiro Yamada
Ulf Magnusson
Eugeniu Rosca
Arvind Prasanna
Linus Torvalds
Marc Herbert
Petr Vorel
Yaakov Selkowitz
Nicolas Pitre
Heinrich Schuchardt
Greg Kroah-Hartman
Randy Dunlap
Borislav Petkov
Kamil Rytarowski
Nicolas Iooss
Boris Barbulovski
Ben Hutchings
Cheah Kok Cheong
Dirk Gouders
Paul Bolle
Benjamin Poirier
Al Viro
Jan Beulich
Chris Bainbridge
Vegard Nossum
Markus Mayer
Thiago Macieira
Michal Sojka
Michael Ellerman
Gabriel de Perthuis
Luis R. Rodriguez
Sam Bobroff
Andreas Ruprecht
Markus Elfring
Richard Weinberger
Geert Uytterhoeven
Diego Viola
Martin Walch
Michal Marek
Masahiro Yamada
Colin Ian King
Olof Johansson
Arjun Sreedharan
Peter Kümmel
Andrey Utkin
Bjørn Forsman
Brian Norris
Josh Triplett
Steven Rostedt (Red Hat)
Ben Hutchings
Yann E. MORIN
Kees Cook
Sedat Dilek
Arve Hjønnevåg
Li Zefan
Wengmeiling
Benjamin Poirier
John Stultz
Justin Lecher
Roland Eggner
Tiana Rakotovao Andriamahefa
Wang YanQing