Граф коммитов

27000 Коммитов

Автор SHA1 Сообщение Дата
Arnd Bergmann fa8323bf49 ALSA: firewire-motu: mark trace helpers as __maybe_unused
Two functions were introduced for the purpose of tracing but cause warnings
when tracing is disabled:

sound/firewire/motu/amdtp-motu.c:284:13: error: 'copy_message' defined but not used [-Werror=unused-function]
 static void copy_message(u64 *frames, __be32 *buffer, unsigned int data_blocks,
sound/firewire/motu/amdtp-motu.c:271:13: error: 'copy_sph' defined but not used [-Werror=unused-function]
 static void copy_sph(u32 *frames, __be32 *buffer, unsigned int data_blocks,

Marking them as __maybe_unused will do the right thing here.

Fixes: 17909c1b30 ("ALSA: firewire-motu: add tracepoints for SPH in IEC 61883-1 fashion")
Fixes: c6b0b9e65f ("ALSA: firewire-motu: add tracepoints for messages for unique protocol")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-20 12:50:45 +02:00
Kuninori Morimoto 25165f79ad ASoC: rsnd: enable clock-frequency for both 44.1kHz/48kHz
Current clock-frequency allows only 1 clock, but ADG can
handle both 44.1kHz/48kHz base clocks. This patch enables these.

On Salvator-X board, AUDIO_CLKOUT which is generated by ADG
is connected to ak4613 MCKI, and it should be synchronized with
LRCK. Thus, we need both 44.1kHz/48kHz base clock-frequency.
Otherwise, either one sounds strange in high frequency sound.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-19 17:32:46 +01:00
Kuninori Morimoto 9ca5e57d78 ASoC: rsnd: rsnd_mod_make_sure() is not under DEBUG
rsnd_mod_make_sure() will be used any situation,
thus, under DEBUG is not realistic.
This patch move it to non DEBUG area

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-19 17:32:46 +01:00
Kuninori Morimoto 4898b61e40 ASoC: ak4613: use snd_soc_update_bits() to avoid Reserve bit on I/O CTRL
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-19 17:23:47 +01:00
Jerónimo Borque 5cd5b1bdfb ALSA: hda - Add HP ZBook 15u G3 Conexant CX20724 GPIO mute leds
The HP ZBook 15u G3 has a Conexant CX20724 with mute led on GPIO1 and
mic mute led on GPIO2.
Adding CXT_FIXUP_MUTE_LED_GPIO inspired on patch_realtek's one.

Signed-off-by: Jerónimo Borque <jeronimo@borque.com.ar>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-19 18:00:56 +02:00
Charles Keepax fbeea237af ASoC: cs35l35: Correct some register defaults
Correct some minor errors in the register defaults.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-18 18:59:18 +01:00
Colin Ian King d7766aa57a ASoC: topology: use j for internal loop counter
Currently variable i is being for 2 nested for loops. Fix this by
using integer loop counter j for the inside for loop.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-18 18:53:40 +01:00
Nicole Faerber 67e03ff3f3 ASoC: codecs: rt5670: add Thinkpad Tablet 10 quirk
The Thinkpad Tablet tablet has a similar audio setup as the Intel Braswell
platform.
A quirk is needed to detect the platform and setup the platform data
properly:

Manufacturer: LENOVO
        Product Name: 20C1CTO1WW
        Version: ThinkPad 10

Manufacturer: LENOVO
	Product Name: 20C3001VHH
	Version: ThinkPad 10

Manufacturer: LENOVO
	Product Name: 20C10024GE
	Version: ThinkPad Tablet B

Manufacturer: LENOVO
    	Product Name: 20359
    	Version: Lenovo Miix 2 10

Signed-off-by: Nicole Faerber <nicole.faerber@id3p.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-18 18:19:04 +01:00
Pierre-Louis Bossart beb5989a8c ASoC: Intel: Atom: update Thinkpad 10 quirk
There are multiple skews of the same Lenovo audio hardware
based on the Realtek RT5670 codec.

Manufacturer: LENOVO
        Product Name: 20C1CTO1WW
        Version: ThinkPad 10

Manufacturer: LENOVO
	Product Name: 20C3001VHH
	Version: ThinkPad 10

Manufacturer: LENOVO
	Product Name: 20C10024GE
	Version: ThinkPad Tablet B

Manufacturer: LENOVO
	Product Name: 20359
	Version: Lenovo Miix 2 10

For all these devices, the same quirk is used to force
the machine driver to be based on RT5670 instead of RT5640
as indicated by the BIOS.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=96691
Tested-by: Nicole Faerber <nicole.faerber@dpin.de>
Tested-by: Viacheslav Ostroukh <v.dev@ostroukh.me>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-18 18:19:04 +01:00
John Hsu babd658503 ASoC: nau8540: fix tab conversion problem
Fix the tab converting to space problem.

Signed-off-by: John Hsu <KCHSU0@nuvoton.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-18 18:05:19 +01:00
Mauro Carvalho Chehab a5f8661df0 ALSA: usb-audio: replace /proc/bus/usb by /dev/bus/usb
The /proc/bus/usb devices don't exist anymore, since when we
got rid of usbfs. Those devices are now seen at
/dev/bus/usb.

Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-17 10:23:55 +02:00
Douglas Anderson 7952b4baff ASoC: rt5514: Unconfuse the rt5514 at probe / resume time
The rt5514 can get confused and incorrectly detect a start bit if the
SCL/SDA lines happen to both go low and then high again.  This
situation has been seen to happen at reboot time and is also
theoretically possible during suspend/resume if the rt5514 keeps power
but we shut down the i2c connection.

When this happens the rt5514 is confused about the state of the i2c
bus and won't recognize its own address.  That will lead to the rt5514
incorrectly NAKing the first transfer.

A single i2c transfer to any address should be enough to get the
rt5514 out of this funky state.

It is currently believed that this problem should be fixed in the
rt5514 driver itself because it seems that the i2c controller in the
rt5514 is easily confused.  Most i2c devices wouldn't detect a start
bit in this case.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-14 18:11:37 +01:00
Douglas Anderson 0a78b248c3 ASoC: rt5514: Avoid relying on uninitialized "val" value
In rt5514_i2c_probe() if the regmap_read(RT5514_VENDOR_ID2) fails then
"val" may be left as uninitialized.  Current code relies on "val" not
being RT5514_DEVICE_ID, but that's potentially unsafe.

Let's check for errors from regmap_read() and also explicitly init the
value do we're not passing a possibly uninitialized int to printk.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-14 18:11:37 +01:00
Douglas Anderson d0c02e14e4 ASoC: rt5514: Mark rt5514_i2c_driver as static
There's no reason for rt5514_i2c_driver to be non-static.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-14 18:11:37 +01:00
Takashi Sakamoto ae369e559f ALSA: firewire-tascam: support drain callback for MIDI playback substream
ALSA driver for TASCAM FireWire series transfers MIDI messages in system
workqueue. In current design of the driver, applications should wait for
sequence of transmission when they close ALSA rawmidi character devices.
However, when considering design of rawmidi interface, it's preferable
to wait in drain ioctl.

This commit adds support for the drain ioctl to wait for the end of
the transmission.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-14 14:50:43 +02:00
Takashi Sakamoto 1f94205d22 ALSA: firewire-tascam: move message parameters for async midi port
Units on TASCAM FireWire series handle MIDI messages with support for
running status. Drivers for the series should remember current running
status and transfer valid MIDI messages. For this purpose, current
ALSA driver for the series has some members in its top-level structure.
This is due to better abstraction of async midi port. Nowadays, the
abstraction was localized just for the driver.

This commit moves the members to structure for async midi port.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-14 14:50:40 +02:00
Takashi Sakamoto 3e7dc65ca0 ALSA: firewire-tascam: initialize parameters at open of rawmidi character devices
In current design of ALSA driver for TASCAM FireWire series, initialization
of members in asymc midi port structure is done at device probing. Some of
the members should be initialized every time to use rawmidi devices because
they're changed in sequence of transmission for MIDI messages.

This commit adds a new function to initialize them. Invariant parameters
during object lifetime are kept as is.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-14 14:50:38 +02:00
Takashi Sakamoto 98a00d3602 ALSA: firewire-tascam: use fixed-length array for message cache to async midi port
ALSA driver for TASCAM FireWire series internally allocates 4 byte buffer
for asynchronous transaction to transfer MIDI messages. However, the buffer
can be allocated with memory object of parent structure.

This commit adds 4 byte array as a member of the structure and obsoletes
the redundant allocation. This is deallocated with memory object of parent
structure.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-14 14:50:36 +02:00
Takashi Sakamoto 27badc4c10 ALSA: firewire-tascam: use the same address for asynchronous transaction for MIDI message
Units on TASCAM FireWire series receive MIDI messages by asynchronous
transactions on IEEE 1394 bus. Although the transaction is sent to a
certain register, current ALSA driver for this series has a redundant design.

This commit use the same address for the transaction.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-14 14:50:33 +02:00
Takashi Sakamoto 38d5826142 ALSA: firewire-tascam: send fixed-length transaction for async midi port
TASCAM FireWire series uses asynchronous transactions with fixed length
payload for MIDI messaging. On the other hand, ALSA driver for the series
has a redundant design to handle different length of payload.

This commit removes the redundant abstraction.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-14 14:50:31 +02:00
Takashi Sakamoto 9bae2150d0 ALSA: firewire-tascam: remove callback function from async midi port
As a result of localization of async midi port, ALSA driver for TASCAM
FireWire series can call helper function directly instead of callback
registration.

This commit removes the redundant design.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-14 14:50:29 +02:00
Takashi Sakamoto 531f471834 ALSA: firewire-lib/firewire-tascam: localize async midi port
In Linux kernel 4.4, firewire-lib got a feature called as 'async midi port'
for transmission of MIDI message via IEEE 1394 asynchronous communication,
however actual consumer of this feature is ALSA driver for TASCAM FireWire
series only. When adding this feature, I assumed that ALSA driver for
Digi00x might also be a consumer, actually it's not.

This commit moves the feature from firewire-lib to firewire-tascam module.
Two minor kernel APIs are removed.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-14 14:50:26 +02:00
Takashi Iwai 1900d947b5 Merge branch 'for-linus' into for-next
Back-merge to prepare for applying more FireWire updates.
2017-04-14 09:01:04 +02:00
Takashi Sakamoto 1e0f8f68f7 ALSA: usb-line6: constify snd_kcontrol_new strucutre array
In kernel APIs of ALSA control interface, drivers can create a control
element set by a call of snd_ctl_new1() with a template. This template
is known to have const qualifier in general cases.

This commit adds the qualifier to template array, for safer program and
runtime. Application of this change moves the symbol from .data section
to .rodata section.

Cc: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-14 08:57:56 +02:00
Takashi Sakamoto dfb00a5693 ALSA: firewire-lib: fix inappropriate assignment between signed/unsigned type
An abstraction of asynchronous transaction for transmission of MIDI
messages was introduced in Linux v4.4. Each driver can utilize this
abstraction to transfer MIDI messages via fixed-length payload of
transaction to a certain unit address. Filling payload of the transaction
is done by callback. In this callback, each driver can return negative
error code, however current implementation assigns the return value to
unsigned variable.

This commit changes type of the variable to fix the bug.

Reported-by: Julia Lawall <Julia.Lawall@lip6.fr>
Cc: <stable@vger.kernel.org> # 4.4+
Fixes: 585d7cba5e ("ALSA: firewire-lib: add helper functions for asynchronous transactions to transfer MIDI messages")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-14 08:57:25 +02:00
Takashi Iwai 4e7655fd4f ALSA: seq: Don't break snd_use_lock_sync() loop by timeout
The snd_use_lock_sync() (thus its implementation
snd_use_lock_sync_helper()) has the 5 seconds timeout to break out of
the sync loop.  It was introduced from the beginning, just to be
"safer", in terms of avoiding the stupid bugs.

However, as Ben Hutchings suggested, this timeout rather introduces a
potential leak or use-after-free that was apparently fixed by the
commit 2d7d54002e ("ALSA: seq: Fix race during FIFO resize"):
for example, snd_seq_fifo_event_in() -> snd_seq_event_dup() ->
copy_from_user() could block for a long time, and snd_use_lock_sync()
goes timeout and still leaves the cell at releasing the pool.

For fixing such a problem, we remove the break by the timeout while
still keeping the warning.

Suggested-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-13 14:13:25 +02:00
Ander Conselvan De Oliveira a87a4d23e8 ALSA: hda: Move common haswell init to a helper
Geminilake vendor nid is different from other Skylake variants, but rest
of the initialization code is same.

So a variable is added in hdmi_spec to store the platform specific vendor
nid and move the initialization code to a helper function to be used by
both platform specific init.

Fixes: 126cfa2f5e ("ALSA: hda: Add Geminilake HDMI codec ID")
Signed-off-by: Ander Conselvan De Oliveira <ander.conselvan.de.oliveira@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Jaikrishna Nemallapudi <jaikrishnax.nemallapudi@intel.com>
Cc: Senthilnathan Veppur <senthilnathanx.veppur@intel.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-13 10:23:22 +02:00
Jeeja KP b8c722ddd5 ASoC: Intel: Skylake: Add support for deferred DSP module bind
Module at the end of DSP pipeline that needs to be connected to a module
in another pipeline are represented as a PGA(leaf node) and in PGA event
handler these modules are bound/unbounded. Modules other than PGA leaf
can be connected directly or via switch to a module in another pipeline.
Example: reference path.

To support the deferred DSP module bind, following changes are done:
o When the path is enabled, the destination module that needs to be
bound may not be initialized. If the module is not initialized, add
these modules in a deferred bind list.
o When the destination module is initialized, check for these modules
in deferred bind list. If found, bind them.
o When the destination module is deleted, Unbind the modules.
o When the source module is deleted, remove the entry from the deferred
bind list.

Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-12 16:57:52 +01:00
Fabio Estevam f2a3ee0125 ASoC: fsl_esai: Remove unneeded definition
There is no need for defining FSL_ESAI_RATES locally as the standard
SNDRV_PCM_RATE_8000_192000 definition can be used instead.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-12 16:44:50 +01:00
Bhumika Goyal 49c41e1f23 ALSA: line6: constify snd_kcontrol_new structures
Declare snd_kcontrol_new strcutures as const as they are only passed as
an argument to the function snd_ctl_new1. This argument is of type const,
so snd_kcontrol_new structures having this property can be made const too.
Done using Coccinelle:

@r disable optional_qualifier@
identifier x;
position p;
@@
static struct snd_kcontrol_new x@p={...};

@ok@
identifier r.x;
position p;
@@
snd_ctl_new1(&x@p,...)

@bad@
position p != {r.p,ok.p};
identifier r.x;
@@
x@p

@depends on !bad disable optional_qualifier@
identifier r.x;
@@
+const
struct snd_kcontrol_new x;

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-12 15:35:16 +02:00
Bhumika Goyal 8fdaebbb83 ALSA: usb-audio: constify snd_kcontrol_new structures
Declare snd_kcontrol_new strcutures as const as they are only passed as
an argument to the function snd_ctl_new1. This argument is of type const,
so snd_kcontrol_new structures having this property can be made const too.
Done using Coccinelle:

@r disable optional_qualifier@
identifier x;
position p;
@@
static struct snd_kcontrol_new x@p={...};

@ok@
identifier r.x;
position p;
@@
snd_ctl_new1(&x@p,...)

@bad@
position p != {r.p,ok.p};
identifier r.x;
@@
x@p

@depends on !bad disable optional_qualifier@
identifier r.x;
@@
+const
struct snd_kcontrol_new x;

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-12 15:34:44 +02:00
Takashi Sakamoto f91c9d7610 ALSA: firewire-lib: cache maximum length of payload to reduce function calls
During packet streaming, maximum length of payload for isochronous packet
is invariable, therefore no need to recalculate. Current ALSA IEC 61883-1/6
engine calls a function to calculate it 8,000 or more times per second
for incoming packet processing.

This commit adds a member to have maximum length of payload into 'struct
amdtp_stream', to reduces the function calls. At first callback from
isochronous context, the length is calculated and stored for later
processing.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-12 15:34:21 +02:00
Subhransu S. Prusty 12ee4022f6 ALSA: hda: Add Geminilake id to SKL_PLUS
Geminilake is Skylake family platform. So add it's id to skl_plus check.

Fixes: 126cfa2f5e ("ALSA: hda: Add Geminilake HDMI codec ID")
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Cc: Senthilnathan Veppur <senthilnathanx.veppur@intel.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-12 07:16:48 +02:00
Takashi Iwai b7c5ac88e8 Merge branch 'for-linus' into for-next 2017-04-12 07:16:07 +02:00
John Stultz e6d56d21bd ASoC: hisilicon: Use devm_snd_soc_register_component
Per feedback from Mark Brown, this patch updates the hi6210-i2s
driver to use devm_snd_soc_register_component which simplifies
the logic a bit.

Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-11 21:20:55 +01:00
John Stultz 16c1c089b2 ASoC: hisilicon: Address style nit to use break in final default of switch statement
Mark Brown suggested a style change to use break in the final
default of a switch statement, so this patch addresses that.

Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-11 21:20:51 +01:00
John Stultz da13d7462b ASoC: hisilicon: Add error returns even for cases that shouldn't happen.
This patch addresses feedback from Mark Brown, adding a few
extra error returns in cases that shouldn't happen

Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-11 21:20:44 +01:00
Fabio Estevam 6f2daf82fa ASoC: tas2552: Return the real error code
In the case of error in tas2552_codec_probe() we should better
propagate the real error code instead of always returning '-EIO'.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-11 19:35:58 +01:00
Mousumi Jana b6e38b2944 ASoC: topology: Fix to store enum text values
Add missing enum texts store in soc_enum.

Signed-off-by: Mousumi Jana <mousumix.jana@intel.com>
Signed-off-by: Pardha Saradhi K <pardha.saradhi.kesapragada@intel.com>
Signed-off-by: Kranthikumar, GudishaX <gudishax.kranthikumar@intel.com>
Signed-off-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-11 19:35:28 +01:00
Bard Liao 97c415a6f6 ASoC: rt5665: move rt5665_set_jack_detect to .set_jack
Now, we can use .set_jack callback function on codec level. So we
don't need export rt5665_set_jack_detect.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-11 17:05:20 +01:00
Mark Brown b8d4f7a30b Merge branch 'topic/jack' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-rt5665 2017-04-11 16:58:30 +01:00
Takashi Sakamoto c6b0b9e65f ALSA: firewire-motu: add tracepoints for messages for unique protocol
MOTU units transfer/receive messages in each data block of their
isochronous packet payload. A part of content in the message is cleard for
MIDI message transmission, while the rest is unknown yet. Additional
features are required to assist users and developers to reveal the
details.

This commit adds tracepoints for the purpose. The tracepoints are designed
for MOTU's protocol version 2 and 3 (Protocol version 1 is not upstreamed
yet). In the tracepoints, events are probed to gather first two 24 bit
data chunks of each data block. The chunks are formatted into elements
of 64 bit array with padding in MSB.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-11 08:30:47 +02:00
Takashi Sakamoto 17909c1b30 ALSA: firewire-motu: add tracepoints for SPH in IEC 61883-1 fashion
Unique protocol is used for MOTU FireWire series. In this protocol,
data block format is not compliant to AM824 in IEC 61883-1/6. Each of
the data block consists of 24 bit data chunks, except for a first
quadlet. The quadlet is used for source packet header (SPH) described
in IEC 61883-1.

The sequence of SPH seems to represent presentation timestamp
corresponding to included data. Developers have experienced that invalid
sequence brings disorder of units in the series.

Unfortunately, current implementation of ALSA IEC 61883-1/6 engine and
firewire-motu driver brings periodical noises to the units at sampling
transmission frequency based on 44.1 kHz. The engine generates the SPH with
even interval and this mechanism seems not to be suitable to the units.
Further work is required for this issue and infrastructure is preferable
to assist the work.

This commit adds tracepoints for the purpose. In the tracepoints, events
are probed to gather the SPHs from each data blocks.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-11 08:30:45 +02:00
Takashi Sakamoto b164d2fd6e ALSA: firewire_lib: add tracepoints for packets without CIP headers
Unique protocol is used for RME Fireface series. In this protocol,
payload format for isochronous packet is not compliant to CIP in
IEC 61883-1/6. The packet includes data blocks just with data channels,
without headers and any metadata.

In previous commits, ALSA IEC 61883-1/6 engine supports this protocol.
However, tracepoints are not supported yet, unlike implementation for
IEC 61883-1/6 protocol. This commit adds support of tracepoints for
the protocol.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-11 08:30:43 +02:00
Fabio Estevam 570c70a60f ASoC: sgtl5000: Allow LRCLK pad drive strength to be changed
Introduce the "lrclk-strength" property to allow LRCLK pad drive strength
to be changed via device tree.

When running a stress playback loop test on a mx6dl wandboard channel
swap can be noticed on about 10% of the times.

While debugging this issue I noticed that when probing the SGTL5000
LRCLK pin with the scope the swap did not happen. After removing
the probe the swap started to happen again.

After changing the LRCLK pad drive strength to the maximum value the
issue is gone.

Same fix works on a mx6dl Colibri board as well.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Tested-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-10 20:21:46 +01:00
Bard Liao d7344010d1 ASoC: jack: add snd_soc_codec_set_jack
There are many codecs with the capability of jack detection. Usually,
we create a jack on machine driver but there is no common function for
machine driver to deliver the jack pointer to codec driver.
snd_soc_codec_set_jack can be used for delivering the jack pointer to
codec driver and enable the jack detection function. To make it work,
codec driver need to define a callback function to receive the jack
pointer and do all necessary procedure for enabling jack detection.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-10 19:46:09 +01:00
Andy Green 0bf750f4cb ASoC: hisilicon: Add hi6210 i2s audio driver
Add driver for hi6210 i2s controller found on hi6220 boards.

Signed-off-by: Andy Green <andy.green@linaro.org>
[jstultz: Forward ported to mainline, fairly major rework
 based on suggestions from Mark Brown]
Signed-off-by: John Stultz <john.stultz@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-10 19:40:13 +01:00
Fabio Estevam c6682fedee ASoC: fsl_ssi: Use the tolower() function
Code can be simplified by using the standard tolower() funtion.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Timur Tabi <timur@tabi.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-10 18:49:17 +01:00
Fabio Estevam 580556774a ASoC: fsl_ssi: Remove FSLSSI_I2S_RATES definition
The comment for the FSLSSI_I2S_RATES definition states that the
driver currently only supports I2S slave mode, which is no longer
correct.

As FSLSSI_I2S_RATES is the same as the standard SNDRV_PCM_RATE_CONTINUOUS,
just remove its definition and its comments to make the code simpler.

Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Acked-by: Timur Tabi <timur@tabi.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-10 18:48:49 +01:00
Takashi Iwai 7480316c26 ALSA: hda - Allow to enable/disable vmaster build explicitly
Another preliminary patch for the dual-codec support: since the
support of vmaster over multiple codecs is difficult, simply disable
it by a new flag to hda_codec struct.  A new user hint is added as
well for consistency.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-10 17:45:27 +02:00
Takashi Iwai 9f3dadb156 ALSA: hda - A new flag to enforce prefix to each pin
This is a preliminary patch for a smooth multi-codec support, and it
introduces a new flag, force_pin_prefix, to struct hda_codec.
This flag is used to force to add the pin location prefix to each
input pin.  For example, when there is only one microphone pin,
usually the auto-parser assigns the string "Mic".  With this flag on,
it'll be like "Front Mic".  Also, the creation of "Master" or "PCM"
playback volume for a single pin is suppressed, too.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195305
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-10 17:44:39 +02:00
Takashi Iwai ff21b250e9 Merge branch 'for-linus' into for-next 2017-04-10 17:12:01 +02:00
Libin Yang 1f9d3d9869 ALSA: hda - set intel audio clock to a proper value
On some Intel platforms, the audio clock may not be set correctly
with initial setting. This will cause the audio playback/capture
rates wrong.

This patch checks the audio clock setting and will set it to a
proper value if it is set incorrectly.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=188411

Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-07 10:39:21 +02:00
Libin Yang dde5bff541 ALSA: hda - add more ML register definitions
This patch refines the definition of AZX_MLCTL_SPA and AZX_MLCTL_CPA
and add more definitions of ML registers

Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-07 10:39:18 +02:00
Arnaud Pouliquen d05d862ead ASoC: STI: Fix null ptr deference in IRQ handler
With RTlinux a race condition has been found that leads to NULL ptr crash:
- On CPU 0: uni_player_irq_handler is called to treat XRUN
 "(player->state == UNIPERIF_STATE_STOPPED)" is FALSE so status is checked,
 dev_err(player->dev, "FIFO underflow error detected") is printed
and then snd_pcm_stream_lock should be called to lock stream for stopping.
- On CPU 1: application stop and close the stream.
Issue is that the stop and shutdown functions are executed while
"FIFO underflow error detected" is printed.
So when CPU 0 calls snd_pcm_stream_lock, player->substream is already null.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-06 19:29:07 +01:00
Charles Keepax 77b329d194 ASoC: cs35l35: Correct handling of PDN_DONE with external boost
When using an external boost supply the PDN_DONE bit is not set, update
the handling in this case to use to use an appropriate fixed delay.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-06 19:27:56 +01:00
Charles Keepax 2c84afb52e ASoC: cs35l35: Improve power down time
Shorten the time it takes to power down the amp by disabling the volume
ramp whilst doing the final shutdown. The driver has already muted the
amplifier at this stage so doing the volume ramp serves no purpose.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-06 19:27:52 +01:00
Daniel Baluta 303e8954af ASoC: codec: wm8960: Stop when a matching PLL freq is found
When a matching PLL freq is found, searching continues even this is
not necessary. The problem was introduced with the following refactoring
commit 84fdc00d51 ("ASoC: codec: wm9860: Refactor PLL out freq search)

Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-06 19:26:41 +01:00
Ryan Lee 7c0c200071 ASoC: Add support for Maxim Integrated MAX98927 Amplifier
Signed-off-by: Ryan Lee <ryans.lee@maximintegrated.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-06 19:25:57 +01:00
Kuninori Morimoto 32973dcf71 ASoC: rsnd: merge rsnd_kctrl_new_m/s/e into rsnd_kctrl_new()
Current rsnd driver is using rsnd_kctrl_new_m/s/e function,
but the differences are very few.
This patch merge these rsnd_kctrl_new_m/s/e into rsnd_kctrl_new

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-06 11:50:18 +01:00
Mark Brown 3a37471551 Merge branch 'fix/rcar' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-rcar 2017-04-06 11:50:04 +01:00
Kuninori Morimoto fc99d23f6d ASoC: rsnd: tidyup src->convert_rate reset timing
Current src->convert_rate will be set on .hw_param, and
be reset on .quit timing.
But, .hw_param will not be called again if user did Ctrl-Z + fg.
It should be reset on initial of .hw_param to keep its value.
Here, ctu.c already do this.
This patch solves this issue, other wise, MIXed sound will be
strange if user did like below.

	> aplay -D plughw:0,0 sound_44100.wav &
	> aplay -D plughw:0,1 sound_96000.wav
	> Ctrl-Z
	> fg # 96kHz will be played as 44.1kHz

Reported-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-06 11:47:15 +01:00
Takashi Sakamoto 7e1621de14 ALSA: firewire-lib/bebob/oxfw: improve response evaluation for AV/C commands
In ALSA firewire stack, some AV/C commands are supported, including
vendor's extensions. Drivers includes response parser of each command,
according to its requirements, while the parser is written with loose
fashion in two points; error check and length check. This doesn't cause
any issues such as kernel corruption, but should be improved.

This commit modifies evaluations of return value on each parsers.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-05 21:37:23 +02:00
Takashi Sakamoto 5b33504bad ALSA: firewire-motu: remove invalid bitshift for register value
In protocol version 3, drivers can read current sampling clock status from
register 0x'ffff'f000'0b14. 8 bits of LSB of this register represents type
of signal as source of clock.

Current driver code includes invalid bitshift to handle the parameter. This
commit fixes the bug.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 5992e30034 ("ALSA: firewire-motu: add support for MOTU 828mk3 (FireWire/Hybrid) as a model with protocol version 3")
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-05 21:36:11 +02:00
Takashi Sakamoto 3d016d57fd ALSA: oxfw: fix regression to handle Stanton SCS.1m/1d
At a commit 6c29230e2a ("ALSA: oxfw: delayed registration of sound
card"), ALSA oxfw driver fails to handle SCS.1m/1d, due to -EBUSY at a call
of snd_card_register(). The cause is that the driver manages to register
two rawmidi instances with the same device number 0. This is a regression
introduced since kernel 4.7.

This commit fixes the regression, by fixing up device property after
discovering stream formats.

Fixes: 6c29230e2a ("ALSA: oxfw: delayed registration of sound card")
Cc: <stable@vger.kernel.org> # 4.7+
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-05 21:35:14 +02:00
Takashi Sakamoto fdb2b2eee6 ALSA: firewire-digi00x: remove transaction handler for unknown purpose
For digi00x series, asynchronous transaction is not used to transfer MIDI
messages to/from control surface. One of transction handlers in my previous
work loses its practical meaning.

This commit removes the handler. I note that unit of console type
transfers 0x00001000 to registered address of host space when switching
to 'standalone' mode. Then the unit generates bus reset.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-05 21:34:13 +02:00
Takashi Sakamoto 0c3f15f39c ALSA: firewire-digi00x: allow user space applications to read/write MIDI messages for all ports
At a commit c5fcee0373 ("ALSA: firewire-digi00x: add MIDI operations for
MIDI control port"), I described that MIDI messages for control surface is
transferred by a different way from the messages for physical ports.
However, this is wrong. MIDI messages to/from all of MIDI ports are
transferred by isochronous packets.

This commit removes codes to transfer MIDI messages via asynchronous
transaction, from MIDI handling layer.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-05 21:34:11 +02:00
Takashi Sakamoto 8820a4cf0c ALSA: firewire-digi00x: handle all MIDI messages on streaming packets
At a commit 9dc5d31cdc ("ALSA: firewire-digi00x: handle MIDI messages in
isochronous packets"), a functionality to handle MIDI messages on
isochronous packet was supported. But this includes some of my
misunderstanding. This commit is to fix them.

For digi00x series, first data channel of data blocks in rx/tx packet
includes MIDI messages. The data channel has 0x80 in 8 bit of its MSB,
however it's against IEC 61883-6. Unique data format is applied:
 - Upper 4 bits of LSB represent port number.
  - 0x0: port 1.
  - 0x2: port 2.
  - 0xe: console port.
 - Lower 4 bits of LSB represent the number of included MIDI message bytes;
   0x0/0x1/0x2.
 - Two bytes of middle of this data channel have MIDI bytes.

Especially, MIDI messages from/to console surface are also transferred by
isochronous packets, as well as physical MIDI ports.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-05 21:34:10 +02:00
Takashi Sakamoto 13e005f9f9 ALSA: firewire-digi00x: add support for console models of Digi00x series
Digi00x series includes two types of unit; rack and console. As long as
reading information on config rom of Digi 002 console, 'MODEL_ID' field
has a different value from the one on Digi 002 rack.

We've already got a test report from users with Digi 003 rack. We can
assume that console type and rack type has different value in the field.

This commit adds a device entry for console type. For following commits,
this commit also adds a member to 'struct snd_digi00x' to identify console
type.

$ cd linux-firewire-utils/src
$ python2 ./crpp < /sys/bus/firewire/devices/fw1/config_rom
               ROM header and bus information block
               -----------------------------------------------------------------
400  0404f9d0  bus_info_length 4, crc_length 4, crc 63952
404  31333934  bus_name "1394"
408  60647002  irmc 0, cmc 1, isc 1, bmc 0, cyc_clk_acc 100, max_rec 7 (256)
40c  00a07e00  company_id 00a07e     |
410  00a30000  device_id 0000a30000  | EUI-64 00a07e0000a30000

               root directory
               -----------------------------------------------------------------
414  00058a39  directory_length 5, crc 35385
418  0c0043a0  node capabilities
41c  04000001  hardware version
420  0300a07e  vendor
424  81000007  --> descriptor leaf at 440
428  d1000001  --> unit directory at 42c

               unit directory at 42c
               -----------------------------------------------------------------
42c  00046674  directory_length 4, crc 26228
430  120000a3  specifier id
434  13000001  version
438  17000001  model
43c  81000007  --> descriptor leaf at 458

               descriptor leaf at 440
               -----------------------------------------------------------------
440  00055913  leaf_length 5, crc 22803
444  000050f2  descriptor_type 00, specifier_ID 50f2
448  80000000
44c  44696769
450  64657369
454  676e0000

               descriptor leaf at 458
               -----------------------------------------------------------------
458  0004a6fd  leaf_length 4, crc 42749
45c  00000000  textual descriptor
460  00000000  minimal ASCII
464  44696769  "Digi"
468  20303032  " 002"

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-05 21:34:08 +02:00
Takashi Sakamoto 76fdb3a9e1 ALSA: fireface: add support for Fireface 400
Fireface 400 is a second model of RME Fireface series, released in 2006.
This commit adds support for this model.

This model supports 8 analog channels, 2 S/PDIF channels and 8 ADAT
channels in both of tx/rx packet. The number of ADAT channels differs
depending on each mode of sampling transmission frequency.

$ python2 linux-firewire-utils/src/crpp < /sys/bus/firewire/devices/fw1/config_rom
               ROM header and bus information block
               -----------------------------------------------------------------
400  04107768  bus_info_length 4, crc_length 16, crc 30568 (should be 61311)
404  31333934  bus_name "1394"
408  20009002  irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 9 (1024)
40c  000a3501  company_id 000a35     |
410  1bd0862a  device_id 011bd0862a  | EUI-64 000a35011bd0862a

               root directory
               -----------------------------------------------------------------
414  000485ec  directory_length 4, crc 34284
418  03000a35  vendor
41c  0c0083c0  node capabilities per IEEE 1394
420  8d000006  --> eui-64 leaf at 438
424  d1000001  --> unit directory at 428

               unit directory at 428
               -----------------------------------------------------------------
428  000314c4  directory_length 3, crc 5316
42c  12000a35  specifier id
430  13000002  version
434  17101800  model

               eui-64 leaf at 438
               -----------------------------------------------------------------
438  000261a8  leaf_length 2, crc 25000
43c  000a3501  company_id 000a35     |
440  1bd0862a  device_id 011bd0862a  | EUI-64 000a35011bd0862a

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-05 21:31:54 +02:00
Takashi Sakamoto f656edd5fb ALSA: fireface: add hwdep interface
This commit adds hwdep interface so as the other drivers for audio and
music units on IEEE 1394 have.

This interface is designed for mixer/control applications. By using this
interface, an application can get information about firewire node, can
lock/unlock kernel streaming and can get notification at starting/stopping
kernel streaming.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-05 21:31:49 +02:00
Takashi Sakamoto 4b316436ab ALSA: fireface: add support for PCM functionality
This commit adds PCM functionality to transmit/receive PCM frames on
isochronous packet streaming. This commit enables userspace applications
to start/stop packet streaming via ALSA PCM interface.

Sampling rate requested by applications is used as sampling transmission
frequency of IEC 61883-1/6packet streaming. As I described in followed
commits, units in this series manages sampling clock frequency
independently of sampling transmission frequency, and they supports
resampling between their packet streaming/data block processing layer and
sampling data processing layer. This commit take this driver to utilize
these features for usability.

When internal clock is selected as source signal of sampling clock, this
driver allows user space applications to start PCM substreams at any rate
which packet streaming engine supports as sampling transmission frequency.
In this case, this driver expects units to perform resampling PCM frames
for rx/tx packets when sampling clock frequency and sampling transmission
frequency are mismatched. This is for daily use cases.

When any external clock is selected as the source signal, this driver
gets configured sampling rate from units, then restricts available
sampling rate to the rate for PCM applications. This is for studio use
cases.

Models in this series supports 64.0/128.0 kHz of sampling rate, however
these frequencies are not supported by IEC 61883-6 as sampling transmission
frequency. Therefore, packet streaming engine of ALSA firewire stack can't
handle them. When units are configured to use any external clock as source
signal of sampling clock and one of these unsupported rate is configured
as rate of the sampling clock, this driver returns EIO to user space
applications.

Anyway, this driver doesn't voluntarily configure parameters of sampling
clock. It's better for users to work with appropriate user space
implementations to configure the parameters in advance of usage.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-05 21:31:46 +02:00
Takashi Sakamoto 75d6d89897 ALSA: fireface: add stream management functionality
This commit adds management functionality for packet streaming.

As long as investigating Fireface 400, there're three modes depending
on sampling transmission frequency. The number of data channels in each
data block is different depending on the mode. The set of available
data channels for each mode might be different for each protocol and
model.

The length of registers for the number of isochronous channel is just
three bits, therefore 0-7ch are available.

When bus reset occurs on IEEE 1394 bus, the device discontinues to
transmit packets. This commit aborts PCM substreams at bus reset handler.

As I described in followed commits, The device manages its sampling clock
independently of sampling transmission frequency against IEC 61883-6.
Thus, it's a lower cost to change the sampling transmission frequency,
while data fetch between streaming layer and DSP require larger buffer
for resampling. As a result, device latency might tend to be larger than
ASICs for IEC 61883-1/6 such as DM1000/DM1100/DM1500 (BeBoB),
DiceII/TCD2210/TCD2220/TCD3070 and OXFW970/971.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-05 21:31:44 +02:00
Takashi Sakamoto 6fb7db902b ALSA: fireface: add unique data processing layer
As long as investigating Fireface 400, format of payload of each
isochronous packet is not IEC 61883-1/6, thus its format of data block
is not AM824. The remarkable points of the format are:
 * The payload just consists of some data channels of quadlet size without
   CIP header.
 * Each data channels includes data aligned to little endian order.
 * One data channel consists of two parts; 8 bit ancillary field and 24 bit
   PCM frame.

Due to lack of CIP headers, rx/tx packets include no CIP headers and
different way to check packet discontinuity. For tx packet, the ancillary
field is used for counter. However, the way of counting is different
depending on positions of data channels. At 44.1 kHz, ancillary field in:
 * 1st/6th/9th/10th/14th/17th data channels: not used for this purpose.
 * 2nd/18th data channels: incremented every data block (0x00-0xff).
 * 3rd/4th/5th/11th/12th/13th data channels: incremented every 256 data
   blocks (0x00-0x07).
 * 7th/8th/15th/16th data channels: incremented per the number of data
   blocks in a packet. The increment can occur per packet (0x00-0xff).

For tx packet, tag of each isochronous packet is used for this purpose.
The value of tag cyclically changes between 0, 1, 2 and 3 in this order.
The interval is different depending on sampling transmission frequency.
At 44.1/48.0 kHz, it's 256 data blocks. At 88.2 kHz, it's 96 data blocks.

The number of data blocks in tx packet is exactly the same as
SYT_INTERVAL. There's no empty packet or no-data packet, thus the
throughput is not 8,000 packets per sec. On the other hand, the one in
rx packet is 8,000 packets per sec, thus the number of data blocks is
different between each packet, depending on sampling transmission
frequency:
 * 44.1 kHz: 5 or 6
 * 48.0 kHz: 5 or 6 or 7
 * 88.2 kHz: 10 or 11 or 12

This commit adds data processing layer to satisfy the above specification
in a policy of 'best effort'. Although PCM frames are handled for
intermediate buffer to user space, the ancillary data is not handled at all
to reduce CPU usage, thus counter is not checked. 0 is always used for tag
of isochronous packet. Furthermore, the packet streaming layer is
responsible for calculation of the number of data blocks for each packet,
thus it's not exactly the same sequence from the above observation.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-05 21:31:42 +02:00
Takashi Sakamoto 3b196c394d ALSA: firewire-lib: add no-header packet processing
As long as investigating Fireface 400, IEC 61883-1/6 is not applied to
its packet streaming protocol. Remarks of the specific protocol are:
 * Each packet doesn't include CIP headers.
 * 64,0 and 128,0 kHz are supported.
 * The device doesn't necessarily transmit 8,000 packets per second.
 * 0, 1, 2, 3 are used as tag for rx isochronous packets, however 0 is
   used for tx isochronous packets.

On the other hand, there's a common feature. The number of data blocks
transferred in a second is the same as sampling transmission frequency.
Current ALSA IEC 61883-1/6 engine already has a method to calculate it and
this driver can utilize it for rx packets, as well as tx packets.

This commit adds support for the transferring protocol. CIP_NO_HEADERS
flag is newly added. When this flag is set:
 * Both of 0 (without CIP header) and 1 (with CIP header) are used as tag
   to handle incoming isochronous packet.
 * 0 (without CIP header) is used as tag to transfer outgoing isochronous
   packet.
 * Skip CIP header evaluation.
 * Use unique way to calculate the quadlets of isochronous packet payload.

In ALSA PCM interface, 128.0 kHz is not supported, and the ALSA
IEC 61883-1/6 engine doesn't support 64.0 kHz. These modes are dropped.

The sequence of rx packet has a remarkable quirk about tag. This will be
described in later commits.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-05 21:31:40 +02:00
Takashi Sakamoto ff0fb5aaa8 ALSA: firewire-lib: use the same prototype for functions to handle packet
Audio and music units of RME Fireface series use its own protocol for
isochronous packets to transfer data. This protocol requires ALSA IEC
61883-1/6 engine to have alternative functions.

This commit is a preparation for the protocol.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-05 21:31:38 +02:00
Takashi Sakamoto d3fc7aac11 ALSA: fireface: add proc node to help debugging
Drivers can retrieve the state and configuration of clock by read
transactions.

This commit allows protocol abstraction layer to to dump the
information for debugging, via proc interface.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-05 21:31:36 +02:00
Takashi Sakamoto ff2c293efa ALSA: fireface: add support for MIDI functionality
In previous commit, fireface driver supports unique transaction mechanism
for MIDI feature. This commit adds MIDI functionality for userspace
applications.

As I wrote in a followed commit, user space applications get some
requirement from this driver. It should not touch a register to which
units transmit MIDI messages. It should configure a register in which
MIDI transmission is controlled.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-05 21:31:34 +02:00
Takashi Sakamoto 1917429578 ALSA: fireface: add transaction support
As long as investigating Fireface 400, MIDI messages are transferred by
asynchronous communication over IEEE 1394 bus.

Fireface 400 receives MIDI messages by write transactions to two addresses;
0x'0000'0801'8000 and 0x'0000'0801'9000. Each of two seems to correspond to
MIDI port 1 and 2.

Fireface 400 transfers MIDI messages by write transactions to certain
addresses which configured by drivers. The drivers can decide upper 4 byte
of the addresses by write transactions to 0x'0000'0801'03f4. For the rest
part of the address, drivers can select from below options:
 * 0x'0000'0000
 * 0x'0000'0080
 * 0x'0000'0100
 * 0x'0000'0180

Selected options are represented in register 0x'0000'0801'051c as bit
flags. Due to this mechanism, drivers are restricted to use addresses on
'Memory space' of IEEE 1222, even if transactions to the address have
some side effects.

This commit adds transaction support for MIDI messaging, based on my
assumption that the similar mechanism is used on the other protocols. To
receive asynchronous transactions, the driver allocates a range of address
in 'Memory space'. I apply a strategy to use 0x'0000'0000 as lower 4 byte
of the address. When getting failure from Linux FireWire subsystem, this
driver retries to allocate addresses.

Unfortunately, read transaction to address 0x'0000'0801'051c returns zero
always, however write transactions have effects to the other features such
as status of sampling clock. For this reason, this commit delegates a task
to configure this register to user space applications. The applications
should set 3rd bit in LSB in little endian order.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-05 21:31:31 +02:00
Takashi Sakamoto 53eb086750 ALSA: fireface: add an abstraction layer for model-specific protocols
As of 2016, RME discontinued its Fireface series, thus it's OK for us
to focus on released firmwares to drive known units.

As long as investigating Fireface 400 with Windows driver and comparing
the result to FFADO implementation, I can see these firmwares have
different register assignments. On the other hand, according to manuals
of each models, features relevant to packet streaming seem to be common,
because GUIs for these models have the same options. It's reasonable to
assume an abstraction layer of protocols to communicate to each models.

This commit adds the abstraction layer for the protocols. This layer
includes some functions to operate common features of models in this
series.

In IEC 61883-1/6, the sequence of packet can transfer timing information
to synchronize receivers to transmitters. Units of each node on IEEE 1394
bus can generate transmitter's timing clock by handling value of SYT field
in CIP header with high-precision clock. For audio and music units on
IEEE 1394 bus, this recovered clock is designed to used for sampling clock
to capture/generate PCM frames on DSP/ADC/DAC. (Actually, in this world,
there's no units to implement this specification as is, as long as I
know).

Fireface series doesn't use this mechanism. Besides, It doesn't use
isochronous packet with CIP header. It uses internal crystal unit as its
initial sampling clock. When detecting input signals which can be
available for sampling clock (e.g. ADAT input), drivers can configure
units to use the signals as source of sampling clock. When something goes
wrong, e.g. frequency mismatching between the signal and configured value,
units fallback to the other detected signals alternatively. When detecting
no alternatives, internal crystal unit is used as source of sampling
clock. On manual of Fireface 400, this mechanism is described as
'Autosync'.

On the units, packet streaming is controlled by write transactions to
certain registers. Format of the packet, e.g. the number of data channels
in a data block, is also configured by the same manner. For this purpose,
.begin_session and .finish_session is added.

The remarkable point of this protocol is to allow drivers to configure
arbitrary sampling transmission frequency; e.g. 12.345 Hz. As long as I
know, there's no actual DAC/ADC chips which support this kind of
capability. I think a pair of packet streaming layer and data block
processing layer is isolated from sampling data processing layer in a
point of governed clock. In short, between these parts, resampling layer
exists. Actually, for Fireface 400, write transactions to
0x'0000'8010'051c has an effect to change sampling clock frequency with
base frequencies (32.0/44.1/48.0 kHz) and its multipliers (x2/x4),
regardless of sampling transmission frequency.

For this reason, the abstraction layer doesn't handle parameters for
sampling clock. Instead, each implementation of .begin_session is
expected to configure sampling transmission frequency.

For packet streaming layer, it's enough to get current selection of
source signals for the sampling clock and its frequency. In the
abstraction layer, when internal crystal is selected, drivers can sets
arbitrary sampling frequency, else they should follow configured
frequency. For this purpose, .get_clock is added.

Drivers are allows to bank up data fetching from a pair of packet
streaming/data block processing layer and sampling data processing layer.
This feature seems to suppress noises at starting/stopping packet
streaming. For this purpose, .switch_fetching_mode is added.

As I described in the above, units have remarkable mechanism to manage
sampling clock and process sampling data. For debugging purpose,
.dump_sync_status and .dump_clock_config are added. I don't have a need
to common interface to represent the status and configuration,
developers can add actual implementation of the abstraction layer as they
like.

Unlike PCM frames, MIDI messages are transferred by asynchronous
communication over IEEE 1394 bus, thus target addresses are important for
this feature. The .midi_high_addr_reg, .midi_rx_port_0_reg and
.midi_rx_port_1_reg are for this purpose. I'll describe them in following
commit.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-05 21:31:30 +02:00
Takashi Sakamoto ed90f91a17 ALSA: fireface: add model specific structure
RME Fireface series has several models and their specifications are
different. Currently, we find no way to retrieve the specifications
from actual devices and need to implement them in this driver.

This commit adds a structure to describe model specific data. This
structure has an identical name for each unit, and maximum number of
data channels in each mode. I'll describe about the mode in following
commits.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-05 21:31:28 +02:00
Takashi Sakamoto 324540c4e0 ALSA: fireface: postpone sound card registration
Just after appearing on IEEE 1394 bus, this unit generates several bus
resets. This is due to loading firmware from on-board flash memory and
initialize hardware. It's better to postpone sound card registration.

This commit schedules workqueue to process actual probe processing
2 seconds after the last bus-reset. The card instance is kept at unit
probe callback and released at card free callback. Therefore, when the
actual probe processing fails, the memory block is wasted. This is due to
simplify driver implementation.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-05 21:31:26 +02:00
Takashi Sakamoto 17c4e5eadc ALSA: fireface: add skeleton for RME Fireface series
This commit adds a new driver for RME Fireface series. This commit just
creates/removes card instance according to IEEE 1394 bus event. More
functions will be added in following commits.

Three types of firmware have released by RME GmbH; for Fireface 400, for
Fireface 800 and for UCX/802/UFX. It's reasonable that these models use
different protocol for communication. Currently, I've investigated
Fireface 400 and nothing others.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-05 21:31:24 +02:00
Kuninori Morimoto c12c1aad98 ASoC: soc-core: verify Sound Card normality
Current ALSA SoC Sound Card basically consists of CPU/Codec/Platform
components. If system uses Kernel modules, we can disable these drivers
by using rmmod command. In such case, we can't disable
CPU/Codec/Platform driver without disabling Sound Card driver.

But on the other hand, we can disable these drivers by using unbind
command. In such case, we can disable these drivers randomly.
In this case, we can create dirty Sound Card which is missing necessary
components.

(1) If user disabled Sound Card first, but did nothing to other drivers,
user can't use Sound because Sound Card is no longer exists.
(2) If user disabled CPU/Codec/Platform driver randomly, but did nothing
to Sound Card, user still be able to use Sound Card, because dirty Sound
Card still exists. In this case, Sound system will be crashed if user
started sound playback/capture. But we can't block such random unbind
now.

To avoid Sound Card crash in (2) case, we need to unregister Sound Card
whenever CPU/Codec/Platform component were unregistered.
This patch solves this issue.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-05 18:24:07 +01:00
Daniel Baluta 84fdc00d51 ASoC: codec: wm9860: Refactor PLL out freq search
Add a separate function for deriving (sysclk, lrclk, bclk)
when the clock is auto or pll.

Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-05 18:23:15 +01:00
Javier Martinez Canillas 7b87463edf ASoC: rt5677: Add OF device ID table
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.

Before this patch:

$ modinfo sound/soc/codecs/snd-soc-rt5677.ko | grep alias
alias:          i2c:RT5677CE:00
alias:          i2c:rt5676
alias:          i2c:rt5677

After this patch:

$ modinfo sound/soc/codecs/snd-soc-rt5677.ko | grep alias
alias:          of:N*T*Crealtek,rt5677C*
alias:          of:N*T*Crealtek,rt5677
alias:          i2c:RT5677CE:00
alias:          i2c:rt5676
alias:          i2c:rt5677

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-05 18:22:56 +01:00
Javier Martinez Canillas 5cf015d9cb ASoC: wm8978: Add OF device ID table
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.

Before this patch:

$ modinfo sound/soc/codecs/snd-soc-wm8978.ko | grep alias
alias:          i2c:wm8978

After this patch:

$ modinfo sound/soc/codecs/snd-soc-wm8978.ko | grep alias
alias:          i2c:wm8978
alias:          of:N*T*Cwlf,wm8978C*
alias:          of:N*T*Cwlf,wm8978

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-05 18:22:27 +01:00
Javier Martinez Canillas ea22a26e67 ASoC: uda1380: Add OF device ID table
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.

Before this patch:

$ modinfo sound/soc/codecs/snd-soc-uda1380.ko | grep alias
alias:          i2c:uda1380

After this patch:

$ modinfo sound/soc/codecs/snd-soc-uda1380.ko | grep alias
alias:          of:N*T*Cnxp,uda1380C*
alias:          of:N*T*Cnxp,uda1380
alias:          i2c:uda1380

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-05 18:21:16 +01:00
Javier Martinez Canillas 9abe464821 ASoC: sta529: Add OF device ID table
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.

Before this patch:

$ modinfo sound/soc/codecs/snd-soc-sta529.ko | grep alias
alias:          i2c:sta529

After this patch:

$ modinfo sound/soc/codecs/snd-soc-sta529.ko | grep alias
alias:          of:N*T*Cst,sta529C*
alias:          of:N*T*Cst,sta529
alias:          i2c:sta529

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-05 18:21:01 +01:00
Javier Martinez Canillas 71c314d7ef ASoC: ssm4567: Add OF device ID table
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.

Before this patch:

$ modinfo sound/soc/codecs/snd-soc-ssm4567.ko | grep alias
alias:          acpi*:INT343B:*
alias:          i2c:ssm4567

After this patch:

$ modinfo sound/soc/codecs/snd-soc-ssm4567.ko | grep alias
alias:          acpi*:INT343B:*
alias:          of:N*T*Cadi,ssm4567C*
alias:          of:N*T*Cadi,ssm4567
alias:          i2c:ssm4567

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-05 18:20:19 +01:00
Javier Martinez Canillas 9ba2da5f5d ASoc: rt5645: Add OF device ID table
The driver doesn't have a struct of_device_id table but supported devices
are registered via Device Trees. This is working on the assumption that a
I2C device registered via OF will always match a legacy I2C device ID and
that the MODALIAS reported will always be of the form i2c:<device>.

But this could change in the future so the correct approach is to have an
OF device ID table if the devices are registered via OF.

Before this patch:

$ modinfo sound/soc/codecs/snd-soc-rt5645.ko | grep alias
alias:          acpi*:10EC3270:*
alias:          acpi*:10EC5640:*
alias:          acpi*:10EC5650:*
alias:          acpi*:10EC5648:*
alias:          acpi*:10EC5645:*
alias:          i2c:rt5650
alias:          i2c:rt5645

After this patch:

$ modinfo sound/soc/codecs/snd-soc-rt5645.ko | grep alias
alias:          of:N*T*Crealtek,rt5650C*
alias:          of:N*T*Crealtek,rt5650
alias:          of:N*T*Crealtek,rt5645C*
alias:          of:N*T*Crealtek,rt5645
alias:          acpi*:10EC3270:*
alias:          acpi*:10EC5640:*
alias:          acpi*:10EC5650:*
alias:          acpi*:10EC5648:*
alias:          acpi*:10EC5645:*
alias:          i2c:rt5650
alias:          i2c:rt5645

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-05 18:19:58 +01:00
Javier Martinez Canillas 13023ff3b3 ASoC: cs53l30: Set .of_match_table to OF device ID table
The driver has an OF device ID table but the struct i2c_driver
.of_match_table field is not set.

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-05 18:19:46 +01:00
Javier Martinez Canillas 56af0e4cd2 ASoC: max9867: export OF device ID as module aliases
The I2C core always reports a MODALIAS of the form i2c:<foo> even if the
device was registered via OF, this means that exporting the OF device ID
table device aliases in the module is not needed. But in order to change
how the core reports modaliases to user-space, it's better to export it.

While there, move the MODULE_DEVICE_TABLE(i2c, max9867_i2c_id) just next
to the I2C device table declaration, for consistency with other drivers.

Before this patch:

$ modinfo sound/soc/codecs/snd-soc-max9867.ko | grep alias
alias:          i2c:max9867

After this patch:

$ modinfo sound/soc/codecs/snd-soc-max9867.ko | grep alias
alias:          i2c:max9867
alias:          of:N*T*Cmaxim,max9867C*
alias:          of:N*T*Cmaxim,max9867

Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-05 18:19:20 +01:00
Mayuresh Kulkarni 51a2c944ea ASoC: wm_adsp: add support for DSP region lock
Newer ADSP2V2 codecs include a memory protection unit that can
be set to trap illegal accesses. When enabling an ADSPV2 core we
must configure the memory region traps so that the firmware can
access its own memory.

Signed-off-by: Mayuresh Kulkarni <mkulkarni@opensource.wolfsonmicro.com>
Signed-off-by: Nikesh Oswal <Nikesh.Oswal@wolfsonmicro.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-05 16:14:15 +01:00
Richard Fitzgerald e1ea1879f2 ASoC: wm_adsp: Add support for ADSP2V2
Adds support for ADSP2V2 cores. Primary differences are that
they use a 32-bit register map compared to the 16-bit register
map of ADSP2V1, and there are some changes to clocking control.

Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-05 16:14:15 +01:00
Peter Ujfalusi 0636e8b380 ASoC: twl6040: Add control for HS and HF mono to stereo selection
The new controls will give user the ability to route the left PDM channel
data to the right headset/handsfree DAC.
HS mono to stereo switch: PDM channel 1 (or mono) data to both HS DAC.
HF mono to stereo switch: PDM channel 3 data to both HF DAC.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-04-03 18:52:01 +01:00
Takashi Iwai f87e7f2589 ALSA: hda - Improved position reporting on SKL+
Apply the same methods to obtain the current stream position as ASoC
Intel SKL driver uses.  It reads the position from DPIB for a playback
stream while it still reads from the position buffer for a capture
stream.  For a capture stream, some ugly workaround is needed to
settle down the inconsistent position.

Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-03 08:43:17 +02:00
Takashi Iwai 70eafad849 ALSA: hda - Move SKL+ vendor specific register definitions to hda_register.h
They may be used by both legacy and ASoC drivers.

Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-03 08:43:07 +02:00
Takashi Iwai 2c1f81381e ALSA: hda - Avoid tricky macros
The macros _snd_hdac_chip_read() and *_write() expand to different
types (b,w,l) per their argument.  They were thought to be used only
internally for other snd_hdac_chip_*() macros, but in some situations
we need to call these directly, and they are way too ugly.

Instead of saving a few lines, we just write these macros explicitly
with the types, so that they can be used in a saner way.

Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-03 08:42:43 +02:00
Matthias Kaehlcke d1600401fa ALSA: hda/ca0132: Limit values for chip addresses to 32-bit
With the previous unsigned long value clang generates warnings like
this:

sound/pci/hda/patch_ca0132.c:860:37: error: implicit conversion from
'unsigned long' to 'u32' (aka 'unsigned int') changes value from
18446744073709551615 to 4294967295 [-Werror,-Wconstant-conversion]
        spec->curr_chip_addx = (res < 0) ? ~0UL : chip_addx;
                             ~             ^~~~

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-04-01 10:46:18 +02:00
Dan Carpenter a8c006aafe ALSA: timer: Info leak in snd_timer_user_tinterrupt()
The "r1" struct has memory holes.  We clear it with memset on one path
where it is used but not the other.  Let's just memset it at the start
of the function so it's always safe.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-31 17:27:05 +02:00
Dan Carpenter e8ed68205f ALSA: timer: remove some dead code
We just checked "id.card < 0" on the lines before so we know it's not
true here.  We can delete that check.

Also checkpatch.pl complains about some extra curly braces so we may as
well fix that while we're at it.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-31 17:27:02 +02:00
Dan Carpenter 5885615e44 ALSA: emux: stop if copy_from_user() fails
If we can't fill the "patch" struct because "count" is too small (it can
be as low as 4 bytes) or because copy_from_user() failed, then just
return instead of using unintialized data.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-31 16:23:52 +02:00
Takashi Iwai 03a1f48e53 ALSA: usb-audio: Fake also USB device id when alias is given
Recently snd-usb-audio driver received a new option, quirk_alias, to
allow user to apply the existing quirk for a different device.  This
works for many quirks as is, but some still need more tune-ups:
namely, some quirks check the USB vendor/device IDs in various places,
thus it doesn't work as long as the ID is different from the expected
one.

With this patch, the driver stores the aliased USB ID, so that these
rest quirks per device ID are applied.  The transition to use the
cached USB ID was already done in the past, so what we needed now is
only to overwrite chip->usb_id.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-31 11:19:19 +02:00
Hui Wang 2f726aec19 ALSA: hda - fix a problem for lineout on a Dell AIO machine
On this Dell AIO machine, the lineout jack does not work.

We found the pin 0x1a is assigned to lineout on this machine, and in
the past, we applied ALC298_FIXUP_DELL1_MIC_NO_PRESENCE to fix the
heaset-set mic problem for this machine, this fixup will redefine
the pin 0x1a to headphone-mic, as a result the lineout doesn't
work anymore.

After consulting with Dell, they told us this machine doesn't support
microphone via headset jack, so we add a new fixup which only defines
the pin 0x18 as the headset-mic.

[rearranged the fixup insertion position by tiwai in order to make the
 merge with other branches easier -- tiwai]

Fixes: 59ec4b57bc ("ALSA: hda - Fix headset mic detection problem for two dell machines")
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-31 10:58:26 +02:00
Kuninori Morimoto b5aac5a9ad ASoC: rcar: call missing of_clk_del_provider() when remove
adg is calling of_clk_add_provider() when probe time,
thus, remove should call of_clk_del_provider(), it doesn't now.
This patch fix this issue.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-30 22:22:32 +01:00
Kuninori Morimoto d7f298197a ASoC: rcar: fixup of_clk_add_provider() usage for multi clkout
Current adg is calling of_clk_add_povider() multiple times,
but it is not correct usage. This patch fixup its parameter
and call it once.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-30 22:22:32 +01:00
Takashi Iwai 9dfcce42b0 ASoC: Fixes for v4.11
A relatively large pile of fixes for mainline, the first since the merge
 window.  The biggest block of changes here by volume is the sun8i-codec
 set, the driver was newly added in the merge window but it was realized
 that renaming some of the user visible controls was required so these
 are being pushed for v4.11 to avoid the original code appearing in a
 release.  Otherwise it's all fairly standard bugfix stuff.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCAAxFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAljdNc0THGJyb29uaWVA
 a2VybmVsLm9yZwAKCRAk1otyXVSH0IgMB/9SGwZvXPsI0w2q/f7pP4Q7SntvmywP
 o+gyktSaC/nLDpdPkdOBMekzhpkzvEgJsg/07iop/J/qsYSgmRoT+UkGB5KMBYxS
 aFse8ya9NavulcuCksINMr+kPrd9bMGzev0Y2v9p6nOAZ0Yhqoi0cK/JNeLH8WBE
 amgWI7MbZ3vAR5jviKINw57crXsqeJcH7u1IkFNznhUb5MfzO7MdAby2nYnlFiTs
 D7XeA/OV/cffwdsI5fylrD0zCd6DekZImjrv31nGi36DIZ275V4uDiN/XQFel069
 cQc4CYLgMWXiXGZaRmxjqPZ/Om14VY6i17VsoriNhU8e5CtQlynOogV/
 =k725
 -----END PGP SIGNATURE-----

Merge tag 'asoc-fix-v4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v4.11

A relatively large pile of fixes for mainline, the first since the merge
window.  The biggest block of changes here by volume is the sun8i-codec
set, the driver was newly added in the merge window but it was realized
that renaming some of the user visible controls was required so these
are being pushed for v4.11 to avoid the original code appearing in a
release.  Otherwise it's all fairly standard bugfix stuff.
2017-03-30 20:03:25 +02:00
Colin Ian King 5f75b19ef9 ASoC: Intel: bxtn: fix spelling mistake: "Timout" -> "Timeout"
trivial fix to spelling mistake in dev_err error message

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-30 11:15:30 +01:00
Clemens Ladisch ac310dc9fa ALSA: oxygen: simply setting of the shortname for Xonar DG cards
We don't need to manually set the card name; with an entry in the
names[] array, this happens automatically.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-29 21:14:20 +02:00
Mark Brown 2ddaa67626 Merge remote-tracking branches 'asoc/fix/rt5665', 'asoc/fix/simple', 'asoc/fix/sti' and 'asoc/fix/sun8i' into asoc-linus 2017-03-29 12:55:08 +01:00
Mark Brown 367b1301cc Merge remote-tracking branches 'asoc/fix/adsp', 'asoc/fix/atmel', 'asoc/fix/hdac-hdmi' and 'asoc/fix/mtk' into asoc-linus 2017-03-29 12:55:06 +01:00
Mark Brown 0cb3a12f2a Merge remote-tracking branch 'asoc/fix/rcar' into asoc-linus 2017-03-29 12:55:05 +01:00
Mark Brown 4368c27666 Merge remote-tracking branch 'asoc/fix/intel' into asoc-linus 2017-03-29 12:55:05 +01:00
Jeeja KP 473a4d516c ASoC: Intel: Skylake: Fix module state after unbind and delete
When DSP module is unbound, the module state needs to be in INIT_DONE
state instead of UNINT. Also the state needs to be set to UNINIT after
module is deleted from DSP pipeline.

So, set the module state to INIT_DONE after unbind and then UNINIT after
module is deleted.

Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-29 12:53:43 +01:00
Hardik T Shah fdd85a054b ASoC: Intel: Skylake: Fix DMA position reporting for capture stream
As per hardware recommendation, for every capture stream completion
following operations need to be done in order to reflect the actual
data that is received in position buffer.

1. Wait for 20us before reading the DMA position in buffer once the
interrupt is generated for stream completion.
2. Read any of the register to flush the DMA position value. This is
dummy read operation.

Signed-off-by: Dharageswari R <dharageswari.r@intel.com>
Signed-off-by: Hardik T Shah <hardik.t.shah@intel.com>
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-29 12:53:39 +01:00
Jeeja KP b26199eae8 ASoC: Intel: Skylake: Rearrangement of code to cleanup SKL SST library
Skylake driver topology header/driver structure is referenced and used
in SST library which creates circular dependency. Hence the
rearrangement.

Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-29 12:53:34 +01:00
Vinod Koul 6ad0005f17 ASoC: Intel: Skylake: remove hard coded ACPI path
We should not hard code the ACPI path to get acpi_handle. Instead use
ACPI_HANDLE macro to do the job.

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-29 12:53:32 +01:00
Vinod Koul 9a1e350709 ASoC: Intel: Skylake: Remove redundant vmixer handler
Initially vmixer and mixer widget handlers were bit different, but over
time they became same so remove the duplicate code.

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-29 12:53:30 +01:00
Vinod Koul f7ea77772d ASoC: Intel: Skylake: Don't unload module when in use
A module may have multiple instances in DSP, so unload only when usage
count is zero.

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-29 12:53:27 +01:00
G Kranthi e59ed0875b ASoC: Intel: Skylake: Add 16-bit constraint to FE bxt_rt298 machine
Add constraint to FE to restrict sample format to 16-bit for bxt_rt298
machine

Signed-off-by: G Kranthi <gudishax.kranthikumar@intel.com>
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-29 12:53:24 +01:00
Jeeja KP 66d6bbc6c0 ASoC: hdac_hdmi: Update sig_bits based on converter capability
When creating the codec dai, use sig_bits to update the max bps based
on the codec capability. So both the link DMA and codec format will be
calculated based on DAI sig_bits.

So update the sig_bits with converter capability and use the sig_bits
for HDA format calculation.

Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-29 12:53:21 +01:00
Jeeja KP 7f975a385b ASoC: Intel: Skylake: Use the sig_bits to define dai bps capability
For calculating the HDA DMA format, use the max_bps supported by the
DAI caps instead of fixing it to 32/24. For host DMA the Max bps support
is 32, but in case of link DMA, this depends on the codec capability.
So use the sig_bits to define the bps supported by dai.

Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-29 12:53:06 +01:00
Mark Brown 240a07dbc3 Merge branch 'topic/hda' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into asoc-intel 2017-03-29 12:50:26 +01:00
Daniel Baluta db22d18945 ASoC: imx-wm8962: Fix codec_clk cleanup
Resource managed devm_clk_get only works with platform's device dev.

Reported-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-29 12:50:12 +01:00
Daniel Baluta fd8ba1e309 ASoC: imx-wm8962: Let codec driver enable/disable its MCLK
WM8962 needs its MCLK when powerup in wm8962_resume(). Thus it's better
to control the MCLK in codec driver. Thus remove the clock enable in
machine driver accordingly.

While at it, get rid of imx_wm8962_remove function since it is now
empty.

Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-29 12:48:33 +01:00
B, Jayachandran ccfdf9f6a4 ALSA: hda: Fix LLCH register read
LLCH is a 16 bit register. Use readw instead of readl API.

Signed-off-by: B, Jayachandran <jayachandran.b@intel.com>
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-29 12:01:35 +01:00
Kuninori Morimoto e0c4211854 ASoC: rcar: remove rsnd_kctrl_remove()
Current rcar driver is trying to remove kctrl when remove time.
But, 1) rcar driver can't/shouldn't remove before removing sound
card driver, 2) sound card driver will call snd_ctl_dev_free()
and removes all kctrls by snd_ctl_remove().
Thus, rsnd_kctrl_remove() is not necessary. Current implementation
will get Oops when removing rcar driver after sound card.
This patch fix this issue.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-29 12:01:10 +01:00
Ryder Lee 8625c1dbd8 ASoC: mediatek: Add mt2701-wm8960 machine driver
Add wm8960 machine driver and config option for MT2701.

Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-29 11:37:53 +01:00
Takashi Sakamoto 5992e30034 ALSA: firewire-motu: add support for MOTU 828mk3 (FireWire/Hybrid) as a model with protocol version 3
MOTU 828mk3 (FireWire/Hybrid) is one of third generation in MOTU FireWire
series, produced in 2008/2014. This model consists of three chips for
functionality on IEEE 1394 bus:

 * TI TSB41AB2 (Physical layer for IEEE 1394 bus)
 * Xilinx Spartan-3E FPGA Family (Link layer for IEEE 1394 bus, packet
   processing and data block processing layer)
 * TI TMS320C6722 (Digital signal processing)

This commit adds a support for this model, with its unique protocol as
version 3. This protocol has some additional features to protocol
version 2.

 * Support several optical interfaces.
 * Support a data chunk for return of reverb effect.
 * Have a quirk of tx packets.
 * Support heartbeat asynchronous transaction.

In this protocol, series of transferred packets has some quirks. Below
fields in CIP headers of the packets are out of IEC 61883-1:
 - SID (source node id): always 0x0d
 - DBS (data block size): always 0x04
 - DBC (data block counter): always 0x00
 - EOH (End of header): always 0x00

Below is an actual sample of transferred packets.

quads CIP1       CIP2
520   0x0D040400 0x22FFFFFF
  8   0x0D040400 0x22FFFFFF
520   0x0D040400 0x22FFFFFF
520   0x0D040400 0x22FFFFFF
  8   0x0D040400 0x22FFFFFF

Status of clock is configured by write transactions to 0x'ffff'f000'0b14,
as well as version 2, while meanings of fields are different from the
former protocols. Modes of optical interfaces are configured by write
transactions to 0x'ffff'f000'0c94.

Drivers can register its address to receive heatbeat transactions from the
unit. 0x'ffff'f000'0b0c is for the higher part and 0x'ffff'f000'0b10 is
for the lower part. Nevertheless, this feature is not useless for this
driver and this commit omits it.

Each data block consists of two parts in a point of the number of included
data chunks. In both of 'fixed' and 'differed' parts, the number of
included data blocks are a multiple of 4, thus depending on models there's
some empty data chunks. For example, 828mk3 includes one pair of empty
data chunks in its fixed part. When optical interface is configured to
S/PDIF, 828mk3 includes one pair of empty data chunks in its differed part.
To reduce consumption of CPU cycles with additional conditions/loops, this
commit just exposes these empty chunks to user space as PCM channels.

Additionally, 828mk3 has a non-negligible overhead to change its sampling
transfer frequency. When softwares send asynchronous transaction to
perform it, LED on the unit starts to blink. In a worst case, it continues
blink during several seconds; e.g. 10 seconds. When stopping blinking,
the unit seems to be prepared for the requested sampling transfer
frequency. To wait for the preparation, this commit forces the driver
to call task scheduler and applications sleeps for 4 seconds.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-28 12:34:13 +02:00
Takashi Sakamoto 2128f78f75 ALSA: firewire-lib: add a quirk of packet without valid EOH in CIP format
In IEC 61883-1, when two quadlets CIP header is used, the most significant
bit in second CIP header stands. However, packets from units with MOTU
protocol version 3 have a quirk without this flag. Current packet streaming
layer handles this as protocol error.

This commit adds a new enumeration constant for this quirk, to handle MOTU
protocol version 3.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-28 12:34:11 +02:00
Takashi Sakamoto 949613e366 ALSA: firewire-motu: add support for MOTU 828mk2 as a model with protocol version 2
MOTU 828mk2 is one of second generation in MOTU FireWire series, produced in
2003. This model consists of four chips:
 * TI TSB41AB2 (Physical layer for IEEE 1394 bus)
 * PDI 1394L40BE (Link layer for IEEE 1394 bus and packet processing layer)
 * ALTERA ACEX 1K EP1K30 Series FPGA (Data block processing layer)
 * TI TMS320VC5402 (Digital signal processing)

This commit adds a support for this model, with its unique protocol as
version 2. The features of this protocol are:

 * Support data chunks for status and control messages for both
   directions.
 * Support a pair of MIDI input/output.
 * Support a data chunk for mic/instrument independent of analog line in.
 * Support a data chunk for playback return.
 * Support independent data chunks for S/PDIF of both optical/coaxial
   interfaces.
 * Support independent data chunks for each of main out and phone out.

Status of clock is configured by write transactions to 0x'ffff'f000'0b14.
Modes of optical interfaces are configured by write transactions to
0x'ffff'f000'0c04.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-28 12:34:08 +02:00
Takashi Sakamoto 5aaab1bf37 ALSA: firewire-motu: enable to read transaction cache via hwdep interface
MOTU FireWire series can transfer messages to registered address. These
messages are transferred for the status of internal clock synchronization
just after starting streams.

When the synchronization is stable, it's 0x01ffffff. Else, it's 0x05ffffff.

This commit adds a functionality for user space applications to receive
content of the message.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-28 12:34:06 +02:00
Takashi Sakamoto 71c3797779 ALSA: firewire-motu: add hwdep interface
This commit adds hwdep interface so as the other sound drivers for units
on IEEE 1394 bus have.

This interface is designed for mixer/control applications. By using this
interface, an application can get information about firewire node, can
lock/unlock kernel streaming and can get notification at starting/stopping
kernel streaming.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-28 12:34:02 +02:00
Takashi Sakamoto 9e796e7d59 ALSA: firewire-motu: add MIDI functionality
In MOTU FireWire series, MIDI messages are multiplexed to isochronous
packets as well as PCM frames, while the way is different from the one
in IEC 61883-6.

MIDI messages are put into a certain position in message chunks. One data
block can includes one byte of the MIDI messages. When data block includes
a MIDI byte, the block has a flag in a certain position of the message
chunk. These positions are unique depending on protocols.

Once a data block includes a MIDI byte, some following data blocks includes
no MIDI bytes. Next MIDI byte appears on a data block corresponding to
next cycle of physical MIDI bus. This seems to avoid buffer overflow caused
by bandwidth differences between IEEE 1394 bus and physical MIDI bus.

This commit adds MIDI functionality to transfer/receive MIDI messages.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-28 12:33:56 +02:00
Takashi Sakamoto dd49b2d1f0 ALSA: firewire-motu: add PCM functionality
This commit adds PCM functionality to transmit/receive PCM samples.

When one of PCM substreams are running or external clock source is
selected, current sampling rate is used. Else, the sampling rate is
changed according to requests from a userspace application.

Available number of samples in a frame of PCM substream is determined at
open(2) to corresponding PCM character device. Later, packet streaming
starts by ioctl(2) with SNDRV_PCM_IOCTL_PREPARE. In theory, between them,
applications can change state of the unit by any write transaction to
change the number. In this case, this driver may fail packet streaming due
to wrong data format.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-28 12:33:53 +02:00
Takashi Sakamoto 4638ec6ede ALSA: firewire-motu: add proc node to show current statuc of clock and packet formats
This commit adds a proc node for debugging purpose.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-28 12:33:51 +02:00
Takashi Sakamoto 9b2bb4f2f4 ALSA: firewire-motu: add stream management functionality
This commit adds a functionality to manage packet streaming for MOTU
FireWire series.

The streaming is not controlled by CMP, thus against IEC 61883-1. Write
transaction to certain addresses start/stop packet streaming.

Transactions to 0x'ffff'f000'0b00 results in isochronous channel number for
both directions and starting/stopping transmission of packets. The
isochronous channel number is represented in 6 bit field, thus units can
identify the channels up to 64, as IEEE 1394 bus specification described.

Transactions to 0x'ffff'f000'0b10 results in packet format for both
directions and transmission speed. When each of data block includes fixed
part of data chunks only, corresponding flags stand.

When bus reset occurs, the units continue to transmit packets with
non-contiguous data block counter. This causes discontinuity detection in
packet streaming engine and ALSA PCM applications receives EPIPE from any
I/O operation. In this case, typical applications manage to recover
corresponding PCM substream. This behaviour is kicked much earlier than
callback of bus reset handler by Linux FireWire subsystem, therefore
status of packet streaming is not changed in the handler.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-28 12:33:34 +02:00
Takashi Sakamoto 2e76701bbb ALSA: firewire-motu: handle transactions specific for MOTU FireWire models
All models of MOTU FireWire series can be controlled by write transaction
to addresses in a range from 0x'ffff'f0000'0b00 to 0x'ffff'f000'0cff.

The models support asynchronous notification. This notification has 32 bit
field data, and is transferred when status of clock changes. Meaning of
the value is not enough clear yet.

Drivers can register its address to receive the notification. Write
transaction to 0x'ffff'f000'0b04 registers higher 16 bits of the address.
Write transaction to 0x'ffff'f0000'0b08 registers the rest of bits. The
address includes node ID, thus it should be registered every time of bus
reset.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-28 12:33:32 +02:00
Takashi Sakamoto 4641c93940 ALSA: firewire-motu: add MOTU specific protocol layer
MOTU FireWire series uses blocking transmission for AMDTP packet streaming.
They transmit/receive 8,000 packets per second, to handle the same number
of data blocks as current sampling transmission frequency. Thus,
IEC 61883-1/6 packet streaming engine of ALSA firewire stack is available
for them.

However, the sequence of packet and data blocks includes some quirks.
Below sample is a sequence of CIP headers of packets received by 828mk2,
at 44.1kHz of sampling transmission frequency.

quads CIP1        CIP2
488   0x020F04E8  0x8222FFFF
  8   0x020F04F8  0x8222FFFF
488   0x020F0400  0x8222FFFF
488   0x020F0408  0x8222FFFF
  8   0x020F04E8  0x8222FFFF
488   0x020F04F0  0x8222FFFF
488   0x020F04F8  0x8222FFFF

The SID (source node ID), DBS (data block size), SPH (source packet header),
FMT (format ID), FDF (format dependent field) and SYT (time stamp) fields
are in IEC 61883-1. Especially, FMT is 0x02, FDF is 0x22 and SYT is 0xffff
to define MOTU specific protocol. In an aspect of dbc field, the value
represents accumulated number of data blocks included the packet. This
is against IEC 61883-1, because according to the specification this value
should be the number of data blocks already transferred.

In ALSA IEC 61883-1/6 engine, this quirk is already supported by
CIP_DBC_IS_END_EVENT flag, because Echo Audio Fireworks has.

Each data block includes SPH as its first quadlet field, to represent its
presentation time stamp. Actual value of SPH is compliant to IEC 61883-1;
lower 25 bits of 32 bits width consists of 13 bits cycle count and 12 bits
cycle offset.

The rest of each data block consists of 24 bit chunks. All of PCM samples,
MIDI messages, status and control messages are transferred by the chunks.
This is similar to '24-bit * 4 Audio Pack' in IEC 61883-6. The position of
each kind of data depends on generations of each model. The number of
whole chunks in a data block is a multiple of 4, to consists of
quadlet-aligned packets.

This commit adds data block processing layer specific for the MOTU
protocol. The remarkable point is the way to generate SPH header. Time
stamps for each data blocks are generated by below calculation:

 * Using pre-computed table for the number of ticks per event
  *  44,1kHz: (557 + 123/441)
  *  48.0kHz: (512 +   0/441)
  *  88.2kHz: (278 + 282/441)
  *  96.0kHz: (256 +   0/441)
  * 176.4kHz: (139 + 141/441)
  * 192.0kHz: (128 +   0/441)
 * Accumulate the ticks and set the value to SPH for every events.
 * This way makes sense only for blocking transmission because this mode
   transfers fixed number or none of events.

This calculation assumes that each data block has a PCM frame which is
sampled according to event timing clock. Current packet streaming layer
has the same assumption.

Although this sequence works fine for MOTU FireWire series at sampling
transmission frequency based on 48.0kHz, it is not enough at the frequency
based on 44.1kHz. The units generate choppy noise every few seconds.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-28 12:33:30 +02:00
Takashi Sakamoto 9dae017bf6 ALSA: firewire-lib: enable CIP_DBC_IS_END_EVENT for both directions of stream
Commit c8bdf49b9935("ALSA: fireworks/firewire-lib: Add a quirk for the
meaning of dbc") adds CIP_DBC_IS_END_EVENT flag just for tx packets.
However, MOTU FireWire series has this quirk for rx packets.

This commit allows both directions with the flag.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-28 12:33:28 +02:00
Takashi Sakamoto 9863874f02 ALSA: firewire-lib: add support for source packet header field in CIP header
In IEC 61883-1, CIP headers can have a SPH field. When a packet has 1 in
SPH field of its CIP header, the packet has a source packet headers. A
source packet header consists of 32 bit field (= 1 quadlet) and it
transfers time stamp, which is the same value as the lower 25 bits of the
IEEE 1394 CYCLE_TIMER register and the rest is zero.

This commit just supports source packet header field because IEC 61883-1
includes ambiguity the position of this header and its count. Each
protocol layer is allowed to have actual implementation according its
requirements.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-28 12:33:26 +02:00
Takashi Sakamoto a04513f8b1 ALSA: firewire-lib: record cycle count for the first packet
Currently, packet streaming layer passes generated SYT value to data block
processing layer. However, this is not enough in a case that the data block
processing layer generates time stamps by its own ways.

For out-packet stream, the packet streaming layer guarantees 8,000 times
calls of data block processing layers per sec. Therefore, when cycle count
of the first packet is recorded, data block processing layers can calculate
own time stamps with the recorded value.

For the reason, this commit allows packet streaming layer to record the
first cycle count. Each data block processing layer can read the count by
accessing a member of structure for packet streaming layer.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-28 12:33:24 +02:00
Takashi Sakamoto 59f6482c21 ALSA: firewire-motu: add an abstraction layer for three types of protocols
In an aspect of used protocols to communicate, models of MOTU FireWire
units are categorized to three generations.

This commit adds an abstraction layer of the protocols for features
related to packet streaming functionality. This layer includes 5
operations.

When configuring packet streaming functionality with sampling rate and
sampling transmission frequency, .get_clock_rate and .set_clock_rate are
called with proper arguments. MOTU FireWire series supports up to 192.0kHz.

When checking current source of sampling clock (not clock for packetization
layer), .get_clock_source is used. Enumeration is added to represent the
sources supported by this series. This operation can be used to expose
available sampling rate to user space applications when the unit is
configured to use any input signal as source of clock instead of crystal
clock.

In the protocols, the path between packet processing layer and digital
signal processing layer can be controlled. This looks a functionality to
'mute' the unit. For this feature, .switch_fetching_mode is added. This
can be used to suppress noises every time packet streaming starts/stops.

In a point of the size of data blocks at a certain sampling transmission
frequency, the most units accept several modes. This is due to usage of
optical interfaces. The size differs depending on which modes are
configured to the interfaces; None, S/PDIF and ADAT. Additionally, format
of packet is different depending on protocols. To cache current size of
data blocks and its format, .cache_packet_formats is added. This is used
by PCM functionality, packet streaming functionality and data block
processing layer.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-28 12:33:23 +02:00
Takashi Sakamoto 5e03c33e3d ALSA: firewire-motu: add a structure for model-dependent parameters.
MOTU FireWire series doesn't tell drivers their capabilities, thus
the drivers should have and apply model-dependent parameters to detected
models.

This commit adds a structure to represent such parameters. Capabilities
are represented by enumeration except for the number of analog line
in/out. Identification name also be in the structure because the units has
no registers for this purpose.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-28 12:33:21 +02:00
Takashi Sakamoto 8865a31e0f ALSA: firewire-motu: postpone sound card registration
Just after appearing on IEEE 1394 bus, this unit generates several bus
resets. This is due to loading firmware from on-board flash memory and
initialize hardware. It's better to postpone sound card registration.

This commit applies this idea.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-28 12:33:19 +02:00
Takashi Sakamoto 6c3cef4890 ALSA: firewire-motu: add skeleton for Mark of the unicorn (MOTU) FireWire series
This commit adds an new driver for MOTU FireWire series. In this commit,
this driver just creates/removes card instance according to bus event.
More functionalities will be added in following commits.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-28 12:33:16 +02:00
Charles Keepax 8e71321d19 ASoC: cs35l35: Clear reset_gpio on the error path in probe
The error path in probe attempts to put the device back into reset.
Should we fail to get the reset_gpio (such as a probe defer) we will
leave the error value in there, which the gpiod_set_value_cansleep on
the error path will attempt to deference.

Fix this issue by clearing reset_gpio before we head into the error
path.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-27 17:26:53 +01:00
Colin Ian King 74a4ce4c8e ASoC: intel: remove unused variable data and associated code
The variable 'data' is assigned null and never re-assigned. There
is also a redundant check for data being non-null which is always
false, so remove this and the variable data and dma_addr as they
are not used once the dead code has been removed.

Detected with CoverityScan, CID#1324015 ("'Constant' variable gaurds
dead code")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Jie Yang <yang.jie@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-27 12:31:43 +01:00
Takashi Iwai 36d96039e7 ASoC: intel: Don't print FW version repeatedly
Intel SST driver spews an info message "FW Versoin xxxx" at each time
the device gets initialized.  Since it's triggered at each PM (or even
runtime PM), it appears so ofetn, and rather becomes annoying than
useful.

This patch suppresses the superfluous messages by checking the
currently loaded FW version with the previously loaded one.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-27 12:30:55 +01:00
Daniel Baluta 3c01b9ee2a ASoC: codec: wm8960: Relax bit clock computation
WM8960 derives bit clock from sysclock using BCLKDIV[3:0] of R8
clocking register (See WM8960 datasheet, page 71).

There are use cases, like this:
aplay -Dhw:0,0 -r 48000 -c 1 -f S20_3LE -t raw audio48k20b_3LE1c.pcm

where no BCLKDIV applied to sysclock can give us the exact requested
bitclk, so driver fails to configure clocking and aplay fails to run.

Fix this by relaxing bitclk computation, so that when no exact value
can be derived from sysclk pick the closest value greater than
expected bitclk.

Suggested-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-24 18:53:06 +00:00
Daniel Baluta 3ddc97211c ASoC: codec: wm8960: Refactor sysclk freq search
Add a separate function for finding (sysclk, lrclk, bclk)
when the clock is auto or mclk. This makes code easier to
read and reduces the indentation level in wm8960_configure_clocking.

Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-24 18:53:04 +00:00
Dmitry Torokhov 73548dd316 ASoC: jack - check status of GPIO-based pins on resume
For GPIO-backed pins that are not configured as wakeup sources, we may
miss change in their state that happens while system is suspended. Let's
use PM notifier to refresh their state upon resume.

Signed-off-by: Dmitry Torokhov <dtor@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-24 18:52:32 +00:00
Kuninori Morimoto 6b8530cc05 ASoC: rcar: ssi: don't set SSICR.CKDV = 000 with SSIWSR.CONT
R-Car Datasheet is indicating "SSICR.CKDV = 000 is invalid when
SSIWSR.WS_MODE = 1 or SSIWSR.CONT = 1".
Current driver will set CONT, thus, we shouldn't use CKDV = 000.
This patch fixup it.

Reported-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-24 18:49:45 +00:00
Hiroyuki Yokoyama dc2721564f ASoC: rcar: enable PCM RATE untile 192000
R-Car sound can handle untile 192000 rate.

Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-24 18:48:24 +00:00
Bhumika Goyal 381ca1d12e ASoC: blackfin: constify snd_soc_ops structures
Declare snd_soc_ops structures as const as they are only stored
in the ops field of a snd_soc_dai_link structure. This field is
of type const, so snd_soc_ops structures having this property
can be made const too.

Cross compiled the .o files for blackfin architecture.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-24 18:48:10 +00:00
Lucas Stach 971edb0a00 ASoC: simple-card: fix simple_dai clk lookup
The clock needs to be stored in the simple_dai structure, so it can
be enabled later on. This has been broken during the conversion to use
devm_* functions for the clk lookup.

Fixes: e984fd61e8 (ASoC: simple-card: use devm_get_clk_from_child())
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-24 18:46:36 +00:00
Arnaud Pouliquen 3c9d3f1bc2 ASoC: STI: Fix reader substream pointer set
reader->substream is used in IRQ handler for error case but is never set.
Set value to pcm substream on DAI startup and clean it on dai shutdown.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-24 18:44:07 +00:00
Kuninori Morimoto 991454e170 ASoC: core: remove pointless auxiliary from snd_soc_component
commit 1a653aa447 ("ASoC: core: replace aux_comp_list to ...")
tried to replace aux_comp_list to component_dev_list,
but it failed because of binding timing. Thus, Sylwester fixuped it by
commit d2e3a1358c ("ASoC: Fix binding and probing of auxiliary...").

One of main purpose of commit 1a653aa447 ("ASoC: core: replace...")
was remove replaceable list (= list_aux) from snd_soc_component by using
new "auxiliary" flags (but it failed).
Because of this background, current code has reborned card_aux_list
(= same as original list_aux), and almost pointless "auxiliary" flags.

Let's remove pointless "auxiliary" flags by this patch
This means, it is same as revert both
commit 1a653aa447 ("ASoC: core: replace aux_comp_list to ...") and
commit d2e3a1358c ("ASoC: Fix binding and probing of auxiliary...").

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-24 18:41:26 +00:00
Takashi Iwai 2d7d54002e ALSA: seq: Fix race during FIFO resize
When a new event is queued while processing to resize the FIFO in
snd_seq_fifo_clear(), it may lead to a use-after-free, as the old pool
that is being queued gets removed.  For avoiding this race, we need to
close the pool to be deleted and sync its usage before actually
deleting it.

The issue was spotted by syzkaller.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-24 17:11:00 +01:00
Arnd Bergmann 13f99ebdd6 ALSA: au88x0: avoid theoretical uninitialized access
The latest gcc-7.0.1 snapshot points out that we if nr_ch is zero, we never
initialize some variables:

sound/pci/au88x0/au88x0_core.c: In function 'vortex_adb_allocroute':
sound/pci/au88x0/au88x0_core.c:2304:68: error: 'mix[0]' may be used uninitialized in this function [-Werror=maybe-uninitialized]
sound/pci/au88x0/au88x0_core.c:2305:58: error: 'src[0]' may be used uninitialized in this function [-Werror=maybe-uninitialized]

I assume this can never happen in practice, but adding a check here doesn't
hurt either and avoids the warning. The code has been unchanged since
the start of git history.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-24 11:59:51 +01:00
Hui Wang 3f307834e6 ALSA: hda - Adding a group of pin definition to fix headset problem
A new Dell laptop needs to apply ALC269_FIXUP_DELL1_MIC_NO_PRESENCE to
fix the headset problem, and the pin definiton of this machine is not
in the pin quirk table yet, now adding it to the table.

Signed-off-by: Hui Wang <hui.wang@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-23 09:39:55 +01:00
Harsha Priya d7fba9dcf6 ASoC: Intel: Update bxt_da7219_max98357a to add a new
This patch adds a platform clock widget to turn off the clock only when
both headset capture and headset playback are not in use. This removes
turning off the clock in hw_free so that the clock is on when
either capture or playback of headset is in progress.

Signed-off-by: Harsha Priya <harshapriya.n@intel.com>
Signed-off-by: Sathyanarayana Nujella <sathyanarayana.nujella@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-21 18:43:32 +00:00
Takashi Iwai c520ff3d03 ALSA: seq: Fix racy cell insertions during snd_seq_pool_done()
When snd_seq_pool_done() is called, it marks the closing flag to
refuse the further cell insertions.  But snd_seq_pool_done() itself
doesn't clear the cells but just waits until all cells are cleared by
the caller side.  That is, it's racy, and this leads to the endless
stall as syzkaller spotted.

This patch addresses the racy by splitting the setup of pool->closing
flag out of snd_seq_pool_done(), and calling it properly before
snd_seq_pool_done().

BugLink: http://lkml.kernel.org/r/CACT4Y+aqqy8bZA1fFieifNxR2fAfFQQABcBHj801+u5ePV0URw@mail.gmail.com
Reported-and-tested-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-21 14:01:10 +01:00
Takashi Iwai c6736a94d0 ALSA: x86: Make CONFIG_SND_X86 bool
CONFIG_SND_X86 is a menu config to filter only for x86-specific
drivers in its sub-menu, and this doesn't have to be tristate but
rather it should be a bool.  Also, like other sub-menu configs, it's
more user-friendly to be default=y; it's merely a menu config and the
actual drivers are configured in the sub-menu, after all.

Fixes: 287599cf2d ("ALSA: add Intel HDMI LPE audio driver for BYT/CHT-T")
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-21 13:26:02 +01:00
Mylène Josserand d1792285ca ASoC: sun8i-codec: Convert to use SND_SOC_DAPM_AIF_IN
Update the driver to use SND_SOC_DAPM_AIF_IN instead of
SND_SOC_DAPM_DAC.
Rename the interface's widgets to be more precise on which slot
the interface is connected.

Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-21 12:16:30 +00:00
Mylène Josserand 79e26de814 ASoC: sun8i-codec: Fix space on audio-routing widget
An unwanted space is present in an audio widget's name on the dapm
routing. It causes an error on the recognition of this widget (error:
("no dapm match for AIF1 Slot 0 Right").

Remove the space fixes it.

Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-21 12:16:25 +00:00
Mylène Josserand 649d554361 ASoC: sun8i-codec: Update mixer to use SOC_DAPM_DOUBLE
Update the driver to use the new SOC_DAPM_DOUBLE definition
on the digital DAC mixer.
Update the names accordingly as, when they are shared, the
controls are not prefixed with the widget's name anymore.

Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-21 12:16:21 +00:00
Mylène Josserand a82f16188a ASoC: sun8i-codec: Remove analog "HP" widget
The "HP" widget is already present and take part to
the analog part (sun8i-codec-analog).

Remove it from the digital part as it is unnecessary.

Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-21 12:16:10 +00:00
Matthias Kaehlcke a16fbb85c7 ALSA: hda/ca0132: Remove double parentheses
The extra pairs of parantheses are not needed and causes clang to
generate warnings like this:

sound/pci/hda/patch_ca0132.c:1171:14: error: equality comparison with extraneous parentheses [-Werror,-Wparentheses-equality]
        if ((buffer == NULL))
             ~~~~~~~^~~~~~~
sound/pci/hda/patch_ca0132.c:1171:14: note: remove extraneous parentheses around the comparison to silence this warning
        if ((buffer == NULL))
            ~       ^      ~
sound/pci/hda/patch_ca0132.c:1171:14: note: use '=' to turn this equality comparison into an assignment
        if ((buffer == NULL))

Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-20 12:55:01 +01:00
Bhumika Goyal 2261cf1ce6 ASoC: omap: constify snd_soc_ops structures
Declare snd_soc_ops structures as const as they are only stored
in the ops field of a snd_soc_dai_link structure. This field is
of type const, so snd_soc_ops structures having this property
can be made const too.

Cross compiled the .o files for arm architecture.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-20 11:26:37 +00:00
Bhumika Goyal 424dfbf2c0 ASoC: mediatek: constify snd_soc_ops structures
Declare snd_soc_ops structures as const as they are only stored
in the ops field of a snd_soc_dai_link structure. This field is
of type const, so snd_soc_ops structures having this property
can be made const too.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-20 11:25:47 +00:00
Bard Liao 17febfa607 ASoC: rt5665: fix wrong pre div reg of IF2 and IF3
The pre divider control register of IF1 and IF2/3 are different.
The driver used the same register for all interfaces which was a
mistake.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-20 11:25:23 +00:00
Bard Liao 83749abaaf ASoC: rt5665: fix wrong shift rt5665_if2_1_adc_in_enum
The shift is RT5665_IF2_1_ADC_IN_SFT not RT5665_IF3_ADC_IN_SFT.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-20 11:25:05 +00:00
Nicolas Iooss cd7d1eab85 ALSA: es1688: Use strcpy() instead of sprintf()
There is no point in using sprintf() without a format string when
strcpy() can perform the same operation.

Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-20 12:24:34 +01:00
Takashi Iwai ebe2aa911f Merge branch 'topic/for-4.12' into for-next 2017-03-20 12:24:26 +01:00
Linus Walleij b3bbef45e9 ASoC: wm8903: add regulator handling
The WM8903 has four different voltage inputs: AVDD, CPVDD, DBVDD
and DCVDD. On the Qualcomm APQ8060 Dragonboard these are all
supplied from proper regulators and thus need activating and
binding.

This is a quick-and-dirty solution just grabbing and enabling the
regulator supplies on probe() and disabling them on remove() and
the errorpath. More elaborate power management is likely possible.

I assume the nVidia designs using this codec have some hard-wired
always-on power and will be happy with using the dummy regulators
for this. But someone from the nVidia camp should probably check
whether they can bind these to proper regulators instead.

We also amend the DT binding document. A small change like this
does not warrant a separate patch for augmenting these.

Cc: devicetree@vger.kernel.org
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Stephen Warren <swarren@nvidia.com>
Cc: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-20 11:24:05 +00:00
Jaroslav Kysela cc3a47a248 ALSA: hda - add support for docking station for HP 840 G3
This tested patch adds missing initialization for Line-In/Out PINs for
the docking station for HP 840 G3.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-20 12:18:05 +01:00
Jaroslav Kysela 04d5466a97 ALSA: hda - add support for docking station for HP 820 G2
This tested patch adds missing initialization for Line-In/Out PINs for
the docking station for HP 820 G2.

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-20 12:18:00 +01:00
Takashi Iwai f363a06642 ALSA: ctxfi: Fix the incorrect check of dma_set_mask() call
In the commit [15c75b09f8d1: ALSA: ctxfi: Fallback DMA mask to 32bit],
I forgot to put "!" at dam_set_mask() call check in cthw20k1.c (while
cthw20k2.c is OK).  This patch fixes that obvious bug.

(As a side note: although the original commit was completely wrong,
 it's still working for most of machines, as it sets to 32bit DMA mask
 in the end.  So the bug severity is low.)

Fixes: 15c75b09f8 ("ALSA: ctxfi: Fallback DMA mask to 32bit")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-03-20 10:08:19 +01:00
Charles Keepax 5d3d0ad688 ASoC: cs35l35: Stash dev pointer directly rather than CODEC pointer
The driver stashes a CODEC pointer in the cs35l35_private structure,
which is used to obtain a struct device pointer for error messages in the
interrupt handler.

However, doing so is not very safe as the interrupt is registered, as it
should be in bus probe, but the CODEC pointer can't be safely stored until
the ASoC level probe. This leaves a window between the two probes where if
any interrupts are received a NULL pointer will be deferenced in the IRQ
handler.

Fix this issue by saving a pointer to the device directly and passing that
to the error messages in the interrupt handler rather than using the CODEC
pointer to access the device pointer.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>

Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-17 21:40:31 +00:00
Kuninori Morimoto d27f3b4a2d ASoC: simple-scu-card: add new simple_priv_to_card() macro
Current simple card driver is directly calling priv->snd_card
everywhere, but it makes unreadable code.
Let's use simple_priv_to_card() macro for it

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-16 14:10:37 +00:00
Kuninori Morimoto 5be509576c ASoC: simple-card: add new simple_priv_to_card() macro
Current simple card driver is directly calling priv->snd_card
everywhere, but it makes unreadable code.
Let's use simple_priv_to_card() macro for it

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-16 14:10:37 +00:00
Kuninori Morimoto 40b68dac75 ASoC: simple-scu-card: use defined dev on probe()
Current asoc_simple_card_probe() already has dev definition,
but some place doesn't use it. Let's fix this issue.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-16 14:10:36 +00:00
Kuninori Morimoto dcee9bfe89 ASoC: simple-card: use defined dev on probe()
Current asoc_simple_card_probe() already has dev definition,
but some place doesn't use it. Let's fix this issue.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-16 14:10:36 +00:00
Bard Liao 9b5d3865b3 ASoC: rt5665: set i2s pin share configuration
I2S2 and I2S3 are share pins. We need to configure it when i2s is
active and disable it when i2s is inactive. To disable i2s pins
means to set them as gpio.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-16 14:08:04 +00:00
Bard Liao 763811987d ASoC: rt5665: fix define of RT5665_HP_DRIVER_5X
It is (0x3 << 2), not (0x2 << 2).

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-16 14:07:50 +00:00
Kuninori Morimoto 9986943ef5 ASoC: rcar: dma: remove unnecessary "volatile"
commit 2a3af642eb20("ASoC: rcar: clear DE bit only in PDMACHCR...")
added rsnd_dmapp_bset(), but it used copy-paste. Thus, it had
unnecessary "volatile", and had below warning on x86.
This patch fix it.

   sound/soc/sh/rcar/dma.c: In function 'rsnd_dmapp_bset':
>> sound/soc/sh/rcar/dma.c:463:21: warning: passing argument 1 of \
   'ioread32' discards 'volatile' qualifier from pointer target \
   type [-Wdiscarded-qualifiers]
     u32 val = ioread32(addr);
                        ^~~~
   In file included from arch/x86/include/asm/io.h:203:0,
                    from arch/x86/include/asm/realmode.h:5,
                    from arch/x86/include/asm/acpi.h:33,
                    from arch/x86/include/asm/fixmap.h:19,
                    from arch/x86/include/asm/apic.h:10,
                    from arch/x86/include/asm/smp.h:12,
                    from include/linux/smp.h:59,
                    from include/linux/topology.h:33,
                    from include/linux/gfp.h:8,
                    from include/linux/idr.h:16,
                    from include/linux/kernfs.h:14,
                    from include/linux/sysfs.h:15,
                    from include/linux/kobject.h:21,
                    from include/linux/of.h:21,
                    from include/linux/of_dma.h:16,
                    from sound/soc/sh/rcar/dma.c:12:
   include/asm-generic/iomap.h:31:21: note: expected 'void *' \
   but argument is of type 'volatile void *'
    extern unsigned int ioread32(void __iomem *);
                        ^~~~~~~~
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-16 14:07:25 +00:00
Mylène Josserand 9123aa8645 ASoC: sun8i-codec: Convert to use SND_SOC_DAPM_AIF_IN
Update the driver to use SND_SOC_DAPM_AIF_IN instead of
SND_SOC_DAPM_DAC.
Rename the interface's widgets to be more precise on which slot
the interface is connected.

Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-15 18:10:51 +00:00
Mylène Josserand 80405d44c3 ASoC: sun8i-codec: Fix space on audio-routing widget
An unwanted space is present in an audio widget's name on the dapm
routing. It causes an error on the recognition of this widget (error:
("no dapm match for AIF1 Slot 0 Right").

Remove the space fixes it.

Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-15 18:10:51 +00:00
Icenowy Zheng 6ff4eb7e5d ASoC: sun8i-codec-analog: split out line in
Allwinner V3s features an analog codec without LINEIN.

Split out this part, in order to prepare for the V3s analog codec.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-15 18:05:44 +00:00
Icenowy Zheng 3f48947d56 ASoC: sun8i-codec-analog: split out mic2
Allwinner V3s features an analog codec without MIC2.

Split out this part, in order to prepare for the V3s analog codec.

Signed-off-by: Icenowy Zheng <icenowy@aosc.xyz>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-15 18:05:32 +00:00
Bryce Ferguson e54fde6171 ASoC: Add AU1761 audio codec as selectable option
This commit adds the ADI AU1761 audio codec as a selectable option
in the kernel config.  Currently the driver can only be selected
for ADI blackfin devices or if SND_SOC_ALL_CODECS is enabled.

Signed-off-by: Bryce Ferguson <bryce.ferguson@rockwellcollins.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-15 18:04:40 +00:00
Kuninori Morimoto 62a10498af ASoC: rcar: clear DE bit only in PDMACHCR when it stops
R-Car datasheet indicates "Clear DE in PDMACHCR" for transfer stop,
but current code clears all bits in PDMACHCR.
Because of this, DE bit might never been cleared,
and it causes CMD overflow. This patch fixes this issue.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-15 17:28:47 +00:00
Dharageswari R bf3e5ef5d5 ASoC: Intel: Skylake: Fix parameter overwrite for KPB Module
KPB module default parameter were overwritten by the dynamic instance
id once use case is executed. This will cause module crash from
subsequent execution of use case as the updated parameters are used.

So instead of over writing the default parameter, make a copy and
update the module parameter and use this in IPC message.

Signed-off-by: Dharageswari R <dharageswari.r@intel.com>
Signed-off-by: Kranthikumar, GudishaX <gudishax.kranthikumar@intel.com>
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-15 17:28:22 +00:00
Jeeja KP b7d0254c51 ASoC: Intel: Skylake: Fix module load when module size > DMA buffer size
When module size > DMA buffer size, driver copies first chunk and waits
for the BDL complete interrupt. BDL complete interrupt never occurs and
wait time expires as module load IPC is not send to start the DMA from
DSP.

To fix the above issue need to follow the below steps:
1. After copying the first chunk, send the module load IPC to start the
DMA.
2. Wait for the BDL interrupt. Once interrupt is received, copy the
next chunk.
3. Continue step 2 till all bytes are copied.
4. When all the bytes are copied (bytes_left = 0), wait for module load
IPC response
5. Handled module load IPC response messages, check the load module IPC
response and wake up the thread to complete module load.

Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-15 17:28:18 +00:00
G Kranthi 7bd86a3059 ASoC: Intel: Skylake: Remove get dsp_ops in cleanup routine
dsp ops is already set in init, so use this in cleanup routine
instead of again retrieving it. Also constify struct skl_dsp_ops.

Signed-off-by: G Kranthi <gudishax.kranthikumar@intel.com>
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-15 17:28:15 +00:00
G Kranthi cb729d80b5 ASoC: Intel: Skylake: Disable notifications at boot after DSP FW init
DSP firmware sends notification every 1ms, which is disabled in runtime
suspend. But if a system has no runtime pm, we keep getting
notification, so disable after FW init as well.

Signed-off-by: G Kranthi <gudishax.kranthikumar@intel.com>
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-15 17:28:11 +00:00
Jeeja KP 3643ff10d4 ASoC: Intel: Skylake: Remove BE prepare ops
Remove BE prepare ops which enables MCLK by default. If MCLK is required
to be enabled for any specific platform, it needs to be enabled in the
corresponding machine driver.

Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-15 17:28:08 +00:00
Jeeja KP 03de8c2ef8 ASoC: Intel: bxtn: Reload the firmware in case of D3 failure
If D3 IPC fails or times out, firmware needs to be reloaded as driver
continues the reset.
So set the fw_load flag to false to reload the firmware in D0.

Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-15 17:28:04 +00:00
Jeeja KP 1fb344a33a ASoC: Intel: bxtn: Update DSP core state in D0
In system suspend, firmware needs to be re-downloaded as IMR is cleared.
When firmware is downloaded in D0, core state is not set to running
state causing instability with subsequent D0-D3 cycles.

So set the core state correctly during D0 and check the DSP core state
if not in reset to set the DSP to D3.

Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-15 17:28:01 +00:00
Jeeja KP 5518af9f97 ASoC: Intel: bxtn: Disable interrupt when DSP is in D3
When DSP is in D3, no interrupts are expected, so disable
interrupt while entering D3.

Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-15 17:27:58 +00:00
Guneshwor Singh 3b563e0a84 ASoC: Intel: Skylake: Fix not to stop src pipe in pre pmd event handler
If the widget is a mixin module, just unbind between source and sink
and don't stop the source pipe as there can be multiple sinks
connected.

Signed-off-by: Guneshwor Singh <guneshwor.o.singh@intel.com>
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-15 17:27:54 +00:00
Jeeja KP 6914968b82 ASoC: Intel: Skylake: Fix to delete DSP pipe after stopping pipe
DSP pipe needs to stopped before deleting the pipe. Currently check is
for pipe state > STARTED, which is incorrect. So changed to include
pipe state STARTED to stop the pipe if it started.

Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-15 17:27:44 +00:00
Bhumika Goyal 5ace37bd79 ASoC: fsl: constify snd_soc_ops structures
Declare snd_soc_ops structures as const as they are only stored
in the ops field of a snd_soc_dai_link structure. This field is
of type const, so snd_soc_ops structures having this property
can be made const too.

The following .o files did not compile:
sound/soc/fsl/{p1022_rdk.c/p1022_ds.c/mpc8610_hpcd.c}

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-15 13:34:32 +00:00
Bhumika Goyal 943b73112d ASoC: pxa: constify snd_soc_ops structures
Declare snd_soc_ops structures as const as they are only stored
in the ops field of a snd_soc_dai_link structure. This field is
of type const, so snd_soc_ops structures having this property
can be made const too.

The .o files did not compile for all the changed .c files.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-15 13:34:16 +00:00
Bard Liao 28d2ca39be ASoC: rt5665: move set_sysclk to codec level
Move set_sysclk to codec level and people can use it at both
codec and dai level.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-13 16:56:13 +00:00
Bard Liao ccd00d5911 ASoC: rt5665: move set_pll to codec level
Move set_pll function to codec level and people can use it at both
codec and dai level. Also, lower case "source" to keep it consistent.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-13 16:56:12 +00:00
Dan Carpenter bfe41c678d ASoC: cs35l35: returning uninitialized in probe()
If cs35l35->pdata.stereo is false then "ret" isn't initialized.

Fixes: 6387f866a2 ("ASoC: Add support for Cirrus Logic CS35L35 Amplifier")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Paul Handrigan <Paul.Handrigan@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-13 16:54:38 +00:00
kbuild test robot f3a612a655 ASoC: cs35l35: fix semicolon.cocci warnings
sound/soc/codecs/cs35l35.c:706:2-3: Unneeded semicolon
sound/soc/codecs/cs35l35.c:543:4-5: Unneeded semicolon
sound/soc/codecs/cs35l35.c:553:4-5: Unneeded semicolon

 Remove unneeded semicolon.

Generated by: scripts/coccinelle/misc/semicolon.cocci

CC: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-13 16:47:56 +00:00
Colin Ian King 03ff570c6b ASoC: cs35l35: trivial fix to indentation
Remove extraneous tab to correct the nesting level indentation

Detected by CoverityScan, CID#1416584 ("Nesting level does
not match indentation")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-13 16:47:20 +00:00
Axel Lin 82875163a8 ASoC: cs35l35: Fix display revision id
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Paul Handrigan <Paul.Handrigan@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-13 16:44:47 +00:00
Pierre-Louis Bossart a9b6567d03 ASoC: Intel: Enable bytcht_nocodec machine driver
Make sure this machine driver is only used if enabled explicitly
and if there is no information found in the SSDT.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-13 16:41:18 +00:00
Pierre-Louis Bossart 759db1c466 ASoC: Intel: boards: add card for MinnowBoardMax/Up I2S access
Add card with dummy codec and DAI to make I2S signals observable.
Uses Mic and Speaker pins/widgets to control DAPM

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-13 16:41:15 +00:00
Pierre-Louis Bossart a63b8a117d ASoC: Intel: Atom: enable BYT/CHT+DA7213 machine driver
Add entries in HID table and reference to bytcht_da7213 driver

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-13 16:41:11 +00:00
Pierre-Louis Bossart 82cf89de2c ASoC: Intel: add machine driver for BYT/CHT + DA7213
Add new machine driver, tested with Ard-Audio-DA7212 [1]
connected to MinnowBoardMAX Turbot.

The MCLK is managed by the codec driver using the "mclk" handle
to reuse existing code, but it could just as well be handled
by this machine driver.

[1] http://www.dialog-semiconductor.com/content/ard-audio-da7212

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-13 16:41:06 +00:00
Pierre-Louis Bossart 8f42c23a98 ASoC: da7213: add ACPI support
Add DLGS7212 and DLGS7213 HID

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-13 16:18:08 +00:00
Charles Keepax bf5043d69c ASoC: cs35l35: Add IRQF_SHARED to IRQ flags
As it is quite common to use a stereo pair of amps but share the IRQ
line between them both add the IRQF_SHARED flag whilst requesting
cs35l35's IRQ.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-13 16:09:25 +00:00
Charles Keepax 1f758cd9da ASoC: cs35l35: Add local variable for dev in probe
Tidy up the code a little by adding a local variable for i2c_client->dev
rather than referring to it explicitly everytime.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-13 16:09:21 +00:00
Charles Keepax 8d45f2d238 ASoC: cs35l35: Add for configuring drive mode in unused slots
Add support for setting how the I2S pins are driven in unused slots,
currently the chip will just use the default of drive 0, however this
causes issues when multiple devices are attached to the same bus.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-13 16:09:17 +00:00
Charles Keepax 1bb06ada03 ASoC: cs35l35: Add missing return in probe
A return statement is missing just before the error paths at the end of
probe. This causes us to fall straight into the error path and disable
the supplies and re-enable reset, as these are only controlled during
probe this causes the part to no longer function.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Acked-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-13 16:09:10 +00:00
Takashi Sakamoto 998d6fb512 ASoC: Intel: Skylake: code cleanup for pin fixup limitation
As a commit 4cd9899f0d ("ASoC: Intel: Skylake: Add multiple pin
formats") describes, 'fixups is applied to pin 0 only'. On the other
hand, the commit left some codes as what they were. This might
confuses readers.

This commit fixes the issue. This doesn't change driver behaviour at all.

Fixes: 4cd9899f0d ("ASoC: Intel: Skylake: Add multiple pin formats")
Signed-off-by: Takashi Sakamoto <takashi.sakamoto@miraclelinux.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Tested-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-13 16:07:41 +00:00
Hiroyuki Yokoyama a1c2ff5372 ASoC: rsnd: fix sound route path when using SRC6/SRC9
This patch fixes the problem that the missing value of the route path
setting table and incorrect values are set in the CMD_ROUTE_SELECT
register.

Signed-off-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
[Kuninori: shared data on MIX and non-MIX case]
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-13 12:58:07 +00:00
Masahiro Yamada 8a1115ff6b scripts/spelling.txt: add "disble(d)" pattern and fix typo instances
Fix typos and add the following to the scripts/spelling.txt:

  disble||disable
  disbled||disabled

I kept the TSL2563_INT_DISBLED in /drivers/iio/light/tsl2563.c
untouched.  The macro is not referenced at all, but this commit is
touching only comment blocks just in case.

Link: http://lkml.kernel.org/r/1481573103-11329-20-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-03-09 17:01:09 -08:00
Brian Norris d6c098a1db ASoC: don't dereference NULL pcm_{new,free}
Not all platform drivers have pcm_{new,free} callbacks. Seen with a
"snd-soc-dummy" codec from sound/soc/rockchip/rk3399_gru_sound.c.

Fixes: 99b04f4c40 ("ASoC: add Component level pcm_new/pcm_free")
Signed-off-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-09 12:34:17 +01:00
Mylène Josserand fa22ca4f90 ASoC: sun8i-codec: Convert to SOC_MIXER_ARRAY
SOC_MIXER_ARRAY is a simplified function of SND_SOC_DAPM_MIXER
which handles automatically the ARRAY_SIZE of controls.

Update the driver to use SOC_MIXER_ARRAY.

Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-08 14:17:53 +01:00
Mylène Josserand ca14da6e61 ASoC: sun8i-codec: Update mixer to use SOC_DAPM_DOUBLE
Update the driver to use the new SOC_DAPM_DOUBLE definition
on the digital DAC mixer.
Update the names accordingly as, when they are shared, the
controls are not prefixed with the widget's name anymore.

Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-08 14:17:49 +01:00
Mylène Josserand 4aa8146c89 ASoC: sun8i-codec: Remove analog "HP" widget
The "HP" widget is already present and take part to
the analog part (sun8i-codec-analog).

Remove it from the digital part as it is unnecessary.

Signed-off-by: Mylène Josserand <mylene.josserand@free-electrons.com>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-08 14:17:44 +01:00
Bard Liao 39841944c6 ASoC: rt5665: enhance jack type detection function
Use manual mode for jack detection function to increase accuracy.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-08 13:48:03 +01:00
Bard Liao 948059ddf9 ASoC: rt5665: enable TDM if more than 2 channels
TDM is necessary for more than 2 channels. And there is no control bit
to specify which slots are using. Machine driver will not need to call
snd_soc_dai_set_tdm_slot if we do it in rt5665_hw_params.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-08 13:47:53 +01:00
Bard Liao 246126b0a4 ASoC: rt5665: increase button detection accuracy
Use sar adc for button detection to increase accuracy.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-08 13:47:52 +01:00
Bard Liao 09b50c3703 ASoC: rt5665: CLKDET is also a power of ASRC
We need to power on CLKDET to use ASRC function.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-08 13:45:14 +01:00
Bard Liao 8f365313be ASoC: rt5665: Vref3 is necessary for Mono Amp
Vref3 is necessary for Mono Amp. So add it to dapm routes

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-08 13:45:14 +01:00
Bard Liao 593dd5d9fb ASoC: rt5665: increase LDO level
Too low LDO level will cause a few functions unstable.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-08 13:45:13 +01:00
Bard Liao f1994a9c09 ASoC: rt5665: fix getting wrong work handler container
We got rt5665 private data from wrong work. It will result in kernel
panic.

Signed-off-by: Bard Liao <bardliao@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2017-03-08 13:44:10 +01:00
Alin Grigorean cb7d53b499 ASoC: fsl: Remove unneeded init of static variable
This was reported by checkpatch.pl

Signed-off-by: Alin Grigorean <alin.grig93@gmail.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-08 11:11:51 +01:00
Takashi Sakamoto 8e15e762cd ASoC: Intel: Skylake: use a helper macro to rounding-up calculation
In 'include/linux/kernel.h', there's a helper macro to round numerical
value. Let's use it.

Signed-off-by: Takashi Sakamoto <takashi.sakamoto@miraclelinux.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Tested-by: Subhransu S. Prusty <subhransu.s.prusty@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-08 11:02:42 +01:00
Lucas Stach 70d435ba1c ASoC: imx-pcm-dma: simplify pcm_config
The generic snd_dmaengine_pcm is able to retrieve all the needed
information from the attached dmaengine and is in fact able to
provide much more accurate flags to userspace, like the SDMA engine
being only able to operate in batch mode.

To avoid any future inconsistencies between the dmaengine and the
pcm_config, rip out the fixed config and rely on the core to fill
in the right flags derived from the dmaengine information.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-08 10:58:42 +01:00
Songjun Wu cd3ac9affc ASoC: atmel-classd: fix audio clock rate
Fix the audio clock rate according to the datasheet.

Reported-by: Dushara Jayasinghe <dushara@successful.com.au>
Signed-off-by: Songjun Wu <songjun.wu@microchip.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
2017-03-07 15:20:32 +01:00
Takashi Sakamoto d1a6fe41d3 ASoC: Intel: Skylake: fix invalid memory access due to wrong reference of pointer
In 'skl_tplg_set_module_init_data()', a pointer to 'params' member of
'struct skl_algo_data' is calculated, then casted to (u32 *) and assigned
to a member of configuration data. The configuration data is passed to the
other functions and used to process intel IPC. In this processing, the
value of member is used to get message data, however this can bring invalid
memory access in 'skl_set_module_params()' as a result of calculation of
a pointer for actual message data.

(sound/soc/intel/skylake/skl-topology.c)
skl_tplg_init_pipe_modules()
->skl_tplg_set_module_init_data() (has this bug)
->skl_tplg_set_module_params()
  (sound/soc/intel/skylake/skl-messages.c)
  ->skl_set_module_params()
    ((char *)param) + data_offset

This commit fixes the bug.

Fixes: abb740033b ("ASoC: Intel: Skylake: Add support to configure module params")
Signed-off-by: Takashi Sakamoto <takashi.sakamoto@miraclelinux.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: <stable@vger.kernel.org> # v4.5+
2017-03-07 15:19:39 +01:00
Codrut Grosu 84052652fe ASoC: txx9: Added requiered spaces.
This was reported by checpatch.pl

Signed-off-by: Codrut GROSU <codrut.cristian.grosu@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07 15:18:35 +01:00
Calin Cruceru 114ab993e1 ASoC: samsung: Remove extra blank lines
This was reported by checkpatch.pl

Signed-off-by: Calin Cruceru <calin@rosedu.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07 15:17:49 +01:00
Jerome Brunet ea2a2ad17c ASoC: dio2125: use gpiod_set_value_cansleep
Use the "cansleep" variant of gpiod_set_value so the driver can be used
with slow gpio controllers as well.

Fixes: 85825d5e88 ("ASoC: dio2125: add dio2125 amp driver")
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07 14:56:06 +01:00
Codrut Grosu 7be5c5fe92 ASoC: pxa: Add space around '='
This was reported by checkpatch.pl

Signed-off-by: Codrut Grosu <codrut.cristian.grosu@gmail.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07 14:32:21 +01:00
Codrut Grosu adbdba3fa1 ASoC: sirf: Added blank line after declarations
This was reported by checkpatch.pl

Signed-off-by: Codrut GROSU <codrut.cristian.grosu@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07 14:31:51 +01:00
Codrut Grosu fe3a980cd3 ASoC: ux500: Added blank line after declarations
This was reported by checkpatch.pl

Signed-off-by: Codrut GROSU <codrut.cristian.grosu@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07 14:31:27 +01:00
Codrut Grosu b1c5d92372 ASoC: ux500: Remove unuseful break after return
This was reported by checkpatch.pl

Signed-off-by: Codrut GROSU <codrut.cristian.grosu@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07 14:31:26 +01:00
Codrut Grosu 8fcf1e5eb4 ASoC: ux500: Added */ to the next line
This was reported by checkpatch.pl

Signed-off-by: Codrut GROSU <codrut.cristian.grosu@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07 14:31:25 +01:00
Codrut Grosu c2dcce361a ASoC: txx9: Added blank line after declarations
This was reported by checkpatch.pl

Signed-off-by: Codrut GROSU <codrut.cristian.grosu@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07 14:30:37 +01:00
Codrut Grosu bf3c6ef7f5 ASoC: tegra: Add blank line after declarations
This was reported by checkpatch.pl

Signed-off-by: Codrut GROSU <codrut.cristian.grosu@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07 14:29:51 +01:00
Adriana Constantinescu 8804e073a8 ASoC: omap: Remove unnecessary 'out of memory' message
Out of memory message detected using checkpatch.pl

Signed-off-by: Adriana Constantinescu <constantinescu33@gmail.com>
Acked-by: Jarkko Nikula <jarkko.nikula@bitmer.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07 14:29:09 +01:00
Codrut Grosu 34e82433c2 ASoC: pxa-ssp: Line up *s in block comments
This was reported by checkpatch.pl

Signed-off-by: Codrut Grosu <codrut.cristian.grosu@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07 14:28:46 +01:00
Codrut Grosu 17339f6099 ASoC: pxa: Remove unneeded return statement in void function
This was reported by checkpatch.pl

Signed-off-by: Codrut Grosu <codrut.cristian.grosu@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07 14:28:42 +01:00
Codrut Grosu 672e3cbe78 ASoC: pxa: Remove spaces before tabs
This was reported by checkpatch.pl

Signed-off-by: Codrut Grosu <codrut.cristian.grosu@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07 14:28:42 +01:00
Codrut Grosu ca87cfad69 ASoC: pxa: Add space around ':' and '('
This was reported by checkpatch.pl

Signed-off-by: Codrut Grosu <codrut.cristian.grosu@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07 14:28:41 +01:00
Codrut Grosu 05af0917aa ASoC: pxa: The open brace is placed with the previous line
This was reported by checkpatch.pl

Signed-off-by: Codrut Grosu <codrut.cristian.grosu@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07 14:27:43 +01:00
Codrut Grosu 291aaff0c6 ASoC: pxa: Remove unneeded else after return statement
This was reported by checkpatch.pl

Signed-off-by: Codrut Grosu <codrut.cristian.grosu@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07 14:27:43 +01:00
Codrut Grosu 3e22e9d702 ASoC: pxa: Remove space before semicolon
This was reported by checkpatch.pl

Signed-off-by: Codrut Grosu <codrut.cristian.grosu@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07 14:27:43 +01:00
Codrut Grosu 1dbe692380 ASoC: pxa-ssp: Added blank line after declarations
This was reported by checkpatch.pl

Signed-off-by: Codrut Grosu <codrut.cristian.grosu@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07 14:27:42 +01:00
Adrian Dinu ec5a82d6c0 ASoC: Add space around '='
This was reported by checkpatch.pl

Signed-off-by: Adrian Dinu <adrian.dinu95@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07 13:51:07 +01:00
Codrut Grosu e2c187a689 ASoC: tegra: Remove unnecessary 'out of memory' message
This was reported by checkpatch.pl

Signed-off-by: Codrut GROSU <codrut.cristian.grosu@gmail.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07 13:50:49 +01:00
Jeeja KP 7d3f91dc1e ASoC: Intel: bxtn: optimize ROM init retries
During S3->S0 transition, sometime ROM init fails because of
authentication engine loads later than the OS. In this case driver
waits for a longer period and then retries the FW download causing
huge delay in resume time of audio device.

To avoid this, ROM INIT wait time is set to a optimal value and
increased the retries for firmware download.

Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07 13:48:01 +01:00
Jeeja KP 31d648f051 ASoC: Intel: bxtn: Store the FW/Library context at boot
Store the DSP firmware/library at boot, so that for S3 to S0 transition
use the stored ctx for downloading the firmware to DSP memory.

Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07 13:47:34 +01:00
Andy Shevchenko b3ec72ace9 ASoC: Intel: bdw-rt5677: Use devm_gpiod_get()
Since index is always 0 replace devm_gpiod_get_index() by devm_gpiod_get()
and apply proper flags.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Liam Girdwood <liam.r.girdwood@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07 13:46:38 +01:00
Colin Ian King 08458871b6 ASoC: Intel: Skylake: fix spelling mistake: "allocationf" -> "allocation"
Trivial fix to spelling mistake in dev_err message.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07 13:46:02 +01:00
Jerome Brunet 85825d5e88 ASoC: dio2125: add dio2125 amp driver
The dio2125 is a stereo output driver with adjustable gain.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07 13:37:11 +01:00
Brian Austin 6387f866a2 ASoC: Add support for Cirrus Logic CS35L35 Amplifier
This patch adds support for the Cirrus Logic
CS35L35 9V Boosted Amplifier

Signed-off-by: Brian Austin <brian.austin@cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07 13:29:33 +01:00
Charles Keepax 7b4af793a7 ASoC: wm_adsp: Acknowledge controls should also check the DSP is running
We should not be writing acknowledge controls until the firmware is
running, as in the case of preloaded firmwares the DSP memory may be
unaccessible to whilst in the preloaded state. This means a write to the
control during this time could be lost.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07 13:07:59 +01:00
Charles Keepax 67430a39ca ASoC: wm_adsp: Return an error on write to a disabled volatile control
Volatile controls should only be accessed when the firmware is active,
currently however writes to these controls will succeed, but the data
will be lost, if the firmware is powered down. Update this behaviour such
that an error is returned the same as it is for reads.

Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-07 13:07:58 +01:00
Michał Kępień 44319ab7e0 platform/x86: dell-laptop: import dell_micmute_led_set() from drivers/leds/dell-led.c
To ensure all users of dell-smbios are in drivers/platform/x86, move the
dell_micmute_led_set() method from drivers/leds/dell-led.c to
drivers/platform/x86/dell-laptop.c.

Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Tested-by: Alex Hung <alex.hung@canonical.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-03-06 22:07:04 +01:00
Michał Kępień 5dba8804e8 ALSA: hda - rename dell_led_set_func to dell_micmute_led_set_func
With dell_app_wmi_led_set() replaced by dell_micmute_led_set(), rename
the function pointer to the latter for consistency.

Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Tested-by: Alex Hung <alex.hung@canonical.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-03-06 22:07:01 +01:00
Michał Kępień fa5923cea8 ALSA: hda - use dell_micmute_led_set() instead of dell_app_wmi_led_set()
The dell_app_wmi_led_set() method introduced in commit db6d8cc007
("dell-led: add mic mute led interface") was implemented as an easily
extensible entry point for other modules to set the state of various
LEDs.  However, almost three years later it is still only used to
control the mic mute LED, so it will be replaced with direct calls to
dell_micmute_led_set().

Signed-off-by: Michał Kępień <kernel@kempniu.pl>
Tested-by: Alex Hung <alex.hung@canonical.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
2017-03-06 22:06:59 +01:00
Jerome Brunet 9000b59d7a ASoC: es7134: add es7134 DAC driver
The es7134 is 24bit, 192Khz i2s DA converter for PCM audio.
Datasheet is available here : http://www.everest-semi.com/pdf/ES7134LV%20DS.pdf

This driver is also compatible with the es7144, which is the same as the
es7134, with 2 additional pins for filtering capacitors.

Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-06 11:45:24 +01:00
Linus Walleij f1013cdeee ASoC: ux500: drop platform DAI assignments
This platform is completely probed by device tree nowadays, so
we need to do a bigger cleanup removing all the non-DT codepaths.
This cleanup must however go in as a fix since it fixes a
regression.

Currently when Ux500 audio is enabled, dmesg complains like
this:

entry->name == "prealloc"
entry->name == "prealloc_max"
entry->name == "prealloc"
------------[ cut here ]------------
WARNING: CPU: 0 PID: 95 at ../fs/proc/generic.c:346
proc_register+0xf0/0x110
proc_dir_entry 'sub0/prealloc' already registered
(...)
entry->name == "prealloc_max"
------------[ cut here ]------------
WARNING: CPU: 0 PID: 95 at ../fs/proc/generic.c:346
proc_register+0xf0/0x110
proc_dir_entry 'sub0/prealloc_max' already registered
(...)
snd-soc-mop500 soc🔉 ab8500-codec-dai.0 <->
80124000.msp mapping ok
entry->name == "prealloc"
entry->name == "prealloc_max"
entry->name == "prealloc"
------------[ cut here ]------------
WARNING: CPU: 0 PID: 95 at ../fs/proc/generic.c:346
proc_register+0xf0/0x110
proc_dir_entry 'sub0/prealloc' already registered
(...)
entry->name == "prealloc_max"
------------[ cut here ]------------
WARNING: CPU: 0 PID: 95 at ../fs/proc/generic.c:346
proc_register+0xf0/0x110
proc_dir_entry 'sub0/prealloc_max' already registered
snd-soc-mop500 soc🔉 ab8500-codec-dai.1 <->
80125000.msp mapping ok

This is because PCMs are created twice for the same hardware,
and this happens because both "platform" and "CPU" DAI links
are specified.

But platform/CPU is an either/or pair, not a both/and pair.
This has maybe worked in the past, but it is causing trouble
now, so let us begin the cleanups by removing the platform
assignment and silencing the boot noise, and make a proper DT
cleanup for the next kernel cycle.

Cc: Ulf Hansson <ulf.hansson@linaro.org>
Cc: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-06 11:43:45 +01:00
Jeeja KP 2fe42dd0f1 ASoC: hdac_hdmi: don't update the iterator in pcm list remove
Fix not to update the iterator element, instead use list_del to remove
entry from the list.

This fixes the following coccinelle and static checker warning:
sound/soc/codecs/hdac_hdmi.c:1884:2-21:iterator with update on line
1885
sound/soc/codecs/hdac_hdmi.c:2011 hdac_hdmi_dev_remove()
	error: potential NULL dereference 'port'.

Fixes: e0e5d3e5a53b('ASoC: hdac_hdmi: Add support for multiple ports to a PCM')
Reported-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-06 11:42:34 +01:00
Jeeja KP 04c8f2bf91 ASoC: hdac_hdmi: avoid reference to invalid variable of the pin list
Using pin list array iterator outside the iteration of the list can
point to dummy element, which can be invalid. So don't use pin variable
outside the pin list iteration.

This fixes the following coccinelle warning:
sound/soc/codecs/hdac_hdmi.c:1419:5-8: ERROR: invalid reference to the
index variable of the iterator

Fixes: 2acd8309a3a4('ASoC: hdac_hdmi: Add support to handle MST capable pin')
Reported-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-06 11:42:29 +01:00
Liviu Dudau a03faba972 ASoC: TLV320AIC23: Unquote NULL from control name
Without this I am getting the following messages at boot on my Trimslice:
   tlv320aic23-codec 2-001a: Control not supported for path LLINEIN -> [NULL] -> Line Input
   tlv320aic23-codec 2-001a: ASoC: no dapm match for LLINEIN --> NULL --> Line Input
   tlv320aic23-codec 2-001a: ASoC: Failed to add route LLINEIN -> NULL -> Line Input
   tlv320aic23-codec 2-001a: Control not supported for path RLINEIN -> [NULL] -> Line Input
   tlv320aic23-codec 2-001a: ASoC: no dapm match for RLINEIN --> NULL --> Line Input
   tlv320aic23-codec 2-001a: ASoC: Failed to add route RLINEIN -> NULL -> Line Input
   tlv320aic23-codec 2-001a: Control not supported for path MICIN -> [NULL] -> Mic Input
   tlv320aic23-codec 2-001a: ASoC: no dapm match for MICIN --> NULL --> Mic Input
   tlv320aic23-codec 2-001a: ASoC: Failed to add route MICIN -> NULL -> Mic Input
   tegra-snd-trimslice sound: tlv320aic23-hifi <-> 70002800.i2s mapping ok

Signed-off-by: Liviu Dudau <liviu@dudau.co.uk>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-06 11:41:11 +01:00
Romain Perier 89433a284d ASoC: rockchip: Enable 192khz in hw_params operation
As the sampling frequency is supported by es8328 in slave mode,
add support for it in the corresponding operation.

Signed-off-by: Romain Perier <romain.perier@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-06 11:41:03 +01:00
Romain Perier 2e589fdc35 ASoC: rockchip: Enable 192khz in hw_params operation
As the sampling frequency is supported by es8328 in slave mode,
add support for it in the corresponding operation.

Signed-off-by: Romain Perier <romain.perier@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-06 11:40:46 +01:00
Romain Perier 404785f9ef ASoC: es8328: Enabling support for 192k
The master and slave modes don't share the same table for MCLK/LRCLK
ratios. The slaves mode has bigger ratios that allow to use BCLK that
matche sampling frequency of 192khz.

This commit enables this rate only for slave mode, i.e it does not
declare this frequency in sysclk_contraints, resulting to an error in
master mode (not supported CLK).

Signed-off-by: Romain Perier <romain.perier@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-06 11:40:17 +01:00
Romain Perier c7ad841eae ASoC: es8328: Simplify rates definition
Currently most of the standard rates are supported by this driver.
Instead of defining each supported rate one by one, we use the SND macro
SNDRV_PCM_RATE_8000_48000. Also adds support for 88.2khz as the codec
supports it and the sys clocks are already supported.

Signed-off-by: Romain Perier <romain.perier@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-06 11:40:15 +01:00
Romain Perier ae884ae78a ASoC: es8328: Let device auto detect ratios in slave mode
In master mode, SCLK and LRCLK signals are generated by the CODEC when
any of the ADC/DAC are enabled. SCLK is derived from MCLK via a
programmable division set by BLK_DIV, LRCLK is derived from MCLK via
another programmable division set by ADCFsRatio/DACFsRatio.

In slave mode, SCLK and LRCLK signals are received as inputs and
supplied externally. LRCLK and SCLK must be synchronously derived from
MCLK with specific rates. The device can auto detect MCLK/LRCLK ratio
according to a predefined table. LRCLK/SCLK ratio is usually 64 (SCLK =
64 * LRCLK)

This commits adds support to let to device auto detect and decide which
ratio to use. The mclkdiv2 and BCLK_DIV ratio and put to zero.

Signed-off-by: Romain Perier <romain.perier@collabora.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-06 11:40:15 +01:00
Kuninori Morimoto 4b30eebfc3 ASoC: rcar: avoid SSI_MODEx settings for SSI8
SSI8 is is sharing pin with SSI7, and nothing to do for SSI_MODEx.
It is special pin and it needs special settings whole system,
but we can't confirm it, because we never have SSI8 available board.

This patch fixup SSI_MODEx settings error for SSI8 on connection test,
but should be confirmed behavior on real board in the future.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Hiroyuki Yokoyama <hiroyuki.yokoyama.vx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-03-06 11:16:08 +01:00
Ingo Molnar 174cd4b1e5 sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h>
Fix up affected files that include this signal functionality via sched.h.

Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-03-02 08:42:32 +01:00
Linus Torvalds 044d5dfd62 sound fixes for 4.11-rc1
A few last-minute fixes for rc1:
 
 - ALSA core timer and sequencer fixes for bugs spotted by syzkaller
 - A couple of trivial HD-audio fixups
 - Additional PCI / codec IDs for Intel Geminilake
 - Fixes for CT-XFi DMA mask bugs
 -----BEGIN PGP SIGNATURE-----
 
 iQJCBAABCAAsFiEECxfAB4MH3rD5mfB6bDGAVD0pKaQFAli2mQcOHHRpd2FpQHN1
 c2UuZGUACgkQbDGAVD0pKaTboA//fvaaaGlU+IUBvEHV8LlqyfHOUBIIyowYIeJE
 mQHV4lrdMa9vEfXpIB5bztrqRcB6O9Trw0l4gEZfkC+YgLdZKZXi/haSdVnYsHRi
 koD8ZM1EtNu8o9FzGhOg8Cefu+bvQCg/dAglt6oitf3av/j6NmpFwC3EZzcAosH/
 VE3VRBk8AyQj1DYmlfoc+i27ksO9OceQI9xvJvGwdbbwzBTH/dL+PGXCwfF88T2p
 CyUvxtCk2HohHMloV6PtbpdD+ldouZxRvQsiV6MRy0Wg+ARAILvjeS9gdn3UT2LE
 E5J2JLM1X0x5J82Hki3z9vctwvmZbifCj/ewlql+3gFgAAvt0/PiRYZ0W1jcUpK6
 5THLRwU8zCOuAhQxsEzhDZh6mQq/gV69mWdVCgp3Er5faZQm6LqPUsHp2+yB/0aK
 0mXFRCAIjJa62ddtl40LPkPtJoEX9M00+ILNeASjMhpZSM8KyuBUnqygCoB1Kxhv
 vOiNhfIzXl8wQl406o/nIiDzbOdK7Ze7GyT6DHNQtNaS/aA9lS5RxYfcxDGce6c4
 nm9bnfkvRypNeY+dQwX5KefOd+ilYLHcOevUv1rC395pby7rEuVuMl/j83Qr8Pof
 cIjdSFefCCCQafH37UZhQ31noBIrxNFwlDBJh2YLWVDj6tU5ikY4GnjZQnMX/uv9
 /6XhpiM=
 =hOYM
 -----END PGP SIGNATURE-----

Merge tag 'sound-fix-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "A few last-minute fixes for rc1:

   - ALSA core timer and sequencer fixes for bugs spotted by syzkaller

   - a couple of trivial HD-audio fixups

   - additional PCI / codec IDs for Intel Geminilake

   - fixes for CT-XFi DMA mask bugs"

* tag 'sound-fix-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: seq: Fix link corruption by event error handling
  ALSA: hda - Add subwoofer support for Dell Inspiron 17 7000 Gaming
  ALSA: ctxfi: Fallback DMA mask to 32bit
  ALSA: timer: Reject user params with too small ticks
  ALSA: hda: Add Geminilake HDMI codec ID
  ALSA: hda - Fix micmute hotkey problem for a lenovo AIO machine
  ALSA: hda - Add Geminilake PCI ID
2017-03-01 09:59:21 -08:00
Takashi Iwai f3ac9f7376 ALSA: seq: Fix link corruption by event error handling
The sequencer FIFO management has a bug that may lead to a corruption
(shortage) of the cell linked list.  When a sequencer client faces an
error at the event delivery, it tries to put back the dequeued cell.
When the first queue was put back, this forgot the tail pointer
tracking, and the link will be screwed up.

Although there is no memory corruption, the sequencer client may stall
forever at exit while flushing the pending FIFO cells in
snd_seq_pool_done(), as spotted by syzkaller.

This patch addresses the missing tail pointer tracking at
snd_seq_fifo_cell_putback().  Also the patch makes sure to clear the
cell->enxt pointer at snd_seq_fifo_event_in() for avoiding a similar
mess-up of the FIFO linked list.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-28 22:15:51 +01:00
Chris Chiu eeed4cd15a ALSA: hda/realtek - Fix speaker support for Asus AiO ZN270IE
Asus AiO ZN270IE with ALC256 has no audio ouput for internal speaker
and headphone. It requires GPIO 2 as an amp. This commit enables the
GPIO and pulls it high.

Signed-off-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-28 21:32:04 +01:00
Chris Chiu 216d7aebbf ALSA: hda/realtek - Fix headset mic and speaker on Asus X441SA/X441UV
ASUS X441SA and X441UV laptops with ALC3236 (ALC223) codec require
the known fixup (ALC269_FIXUP_HEADSET_MIC) and a different pin value on
pin 0x19 to make the headset mic work.

To make the speaker work, it requires an EAPD verb fixup.

Signed-off-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-28 21:32:02 +01:00
Chris Chiu c1732ede5e ALSA: hda/realtek - Fix headset and mic on several Asus laptops with ALC256
Enable jack sensing and fix internal mic and headset mic on
Asus X555UB and X540SA.

Fix internal mic and headset mic on Asus E402NA and E403NA.

Fix headset mic on Asus X541UV, X541SA and Z550SA.

Unfortunately jack sensing for the headset mic is still not working.
We believe this is a codec limitation.

Some of these quirks were authored by João Paulo Rechi Vita.

Signed-off-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-28 21:32:01 +01:00
Chris Chiu 615966adc4 ALSA: hda/realtek - Fix headset mic on several Asus laptops with ALC255
Add pin quirks to enable use of the headset mic on Asus Z550MA,
X540LA, X540LJ, X556UR, Z450LA, and X441NC.

Signed-off-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-28 21:32:00 +01:00
Chris Chiu 5824ce8de7 ALSA: hda/realtek - Add support for Acer Aspire E5-475 headset mic
The Acer laptop Aspire E5-475 with ALC255 can't detect the headset
microphone until we modify a pin definition.

Signed-off-by: Chris Chiu <chiu@endlessm.com>
Signed-off-by: Daniel Drake <drake@endlessm.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-28 21:31:58 +01:00
Takashi Iwai 493de34274 ALSA: hda - Add subwoofer support for Dell Inspiron 17 7000 Gaming
Dell Inspiron 17 7000 Gaming laptop needs a similar quirk like
Inspiron 7599 to support its subwoofer speaker.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=194191
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-28 17:58:05 +01:00
Takashi Iwai 15c75b09f8 ALSA: ctxfi: Fallback DMA mask to 32bit
Currently ctxfi driver tries to set only the 64bit DMA mask on 64bit
architectures, and bails out if it fails.  This causes a problem on
some platforms since the 64bit DMA isn't always guaranteed.  We should
fall back to the default 32bit DMA when 64bit DMA fails.

Fixes: 6d74b86d3c ("ALSA: ctxfi - Allow 64bit DMA")
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-28 17:58:02 +01:00
Takashi Iwai 71321eb3f2 ALSA: timer: Reject user params with too small ticks
When a user sets a too small ticks with a fine-grained timer like
hrtimer, the kernel tries to fire up the timer irq too frequently.
This may lead to the condensed locks, eventually the kernel spinlock
lockup with warnings.

For avoiding such a situation, we define a lower limit of the
resolution, namely 1ms.  When the user passes a too small tick value
that results in less than that, the kernel returns -EINVAL now.

Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-28 15:06:01 +01:00
Mihai Burduselu a65895e0ee ALSA: vx: remove 'out of memory' message
Reported by checkpatch.pl

Signed-off-by: Mihai Burduselu <michelcatalin@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2017-02-28 07:54:33 +01:00
Alexey Dobriyan 5b5e0928f7 lib/vsprintf.c: remove %Z support
Now that %z is standartised in C99 there is no reason to support %Z.
Unlike %L it doesn't even make format strings smaller.

Use BUILD_BUG_ON in a couple ATM drivers.

In case anyone didn't notice lib/vsprintf.o is about half of SLUB which
is in my opinion is quite an achievement.  Hopefully this patch inspires
someone else to trim vsprintf.c more.

Link: http://lkml.kernel.org/r/20170103230126.GA30170@avx2
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27 18:43:47 -08:00
Masahiro Yamada 4091fb95b5 scripts/spelling.txt: add "followings" pattern and fix typo instances
Fix typos and add the following to the scripts/spelling.txt:

  followings||following

While we are here, add a missing colon in the boilerplate in DT binding
documents.  The "you SoC" in allwinner,sunxi-pinctrl.txt was fixed as
well.

I reworded "as the followings:" to "as follows:" for
drivers/usb/gadget/udc/renesas_usb3.c.

Link: http://lkml.kernel.org/r/1481573103-11329-32-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27 18:43:47 -08:00
Masahiro Yamada b8a14f3379 scripts/spelling.txt: add "overwriten" pattern and fix typo instances
Fix typos and add the following to the scripts/spelling.txt:

  overwrien||overwritten

Link: http://lkml.kernel.org/r/1481573103-11329-30-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27 18:43:47 -08:00
Masahiro Yamada 1cce200081 scripts/spelling.txt: add "deintialize(d)" pattern and fix typo instances
Fix typos and add the following to the scripts/spelling.txt:

  deintializing||deinitializing
  deintialize||deinitialize
  deintialized||deinitialized

Link: http://lkml.kernel.org/r/1481573103-11329-28-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27 18:43:47 -08:00
Masahiro Yamada 183b8021fc scripts/spelling.txt: add "intialization" pattern and fix typo instances
Fix typos and add the following to the scripts/spelling.txt:

  intialization||initialization

The "inintialization" in drivers/acpi/spcr.c is a different pattern but
I fixed it as well in this commit.

Link: http://lkml.kernel.org/r/1481573103-11329-16-git-send-email-yamada.masahiro@socionext.com
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-27 18:43:47 -08:00