Граф коммитов

235 Коммитов

Автор SHA1 Сообщение Дата
Abhi Das 25435e5ed6 gfs2: allow quota_check and inplace_reserve to return available blocks
struct gfs2_alloc_parms is passed to gfs2_quota_check() and
gfs2_inplace_reserve() with ap->target containing the number of
blocks being requested for allocation in the current operation.

We add a new field to struct gfs2_alloc_parms called 'allowed'.
gfs2_quota_check() and gfs2_inplace_reserve() return the max
blocks allowed by quota and the max blocks allowed by the chosen
rgrp respectively in 'allowed'.

A new field 'min_target', when non-zero, tells gfs2_quota_check()
and gfs2_inplace_reserve() to not return -EDQUOT/-ENOSPC when
there are atleast 'min_target' blocks allowable/available. The
assumption is that the caller is ok with just 'min_target' blocks
and will likely proceed with allocating them.

Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
2015-03-18 12:47:10 -05:00
Abhi Das b8fbf471ed gfs2: perform quota checks against allocation parameters
Use struct gfs2_alloc_parms as an argument to gfs2_quota_check()
and gfs2_quota_lock_check() to check for quota violations while
accounting for the new blocks requested by the current operation
in ap->target.

Previously, the number of new blocks requested during an operation
were not accounted for during quota_check and would allow these
operations to exceed quota. This was not very apparent since most
operations allocated only 1 block at a time and quotas would get
violated in the next operation. i.e. quota excess would only be by
1 block or so. With fallocate, (where we allocate a bunch of blocks
at once) the quota excess is non-trivial and is addressed by this
patch.

Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
2015-03-18 12:46:54 -05:00
Benjamin Marzinski 2e60d7683c GFS2: update freeze code to use freeze/thaw_super on all nodes
The current gfs2 freezing code is considerably more complicated than it
should be because it doesn't use the vfs freezing code on any node except
the one that begins the freeze.  This is because it needs to acquire a
cluster glock before calling the vfs code to prevent a deadlock, and
without the new freeze_super and thaw_super hooks, that was impossible. To
deal with the issue, gfs2 had to do some hacky locking tricks to make sure
that a frozen node couldn't be holding on a lock it needed to do the
unfreeze ioctl.

This patch makes use of the new hooks to simply the gfs2 locking code. Now,
all the nodes in the cluster freeze and thaw in exactly the same way. Every
node in the cluster caches the freeze glock in the shared state.  The new
freeze_super hook allows the freezing node to grab this freeze glock in
the exclusive state without first calling the vfs freeze_super function.
All the nodes in the cluster see this lock change, and call the vfs
freeze_super function. The vfs locking code guarantees that the nodes can't
get stuck holding the glocks necessary to unfreeze the system.  To
unfreeze, the freezing node uses the new thaw_super hook to drop the freeze
glock. Again, all the nodes notice this, reacquire the glock in shared mode
and call the vfs thaw_super function.

Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-11-17 10:36:39 +00:00
Bob Peterson 0e27c18c30 GFS2: Set of distributed preferences for rgrps
This patch tries to use the journal numbers to evenly distribute
which node prefers which resource group for block allocations. This
is to help performance.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-11-03 19:24:49 +00:00
Jan Kara a937cca270 GFS2: Don't use MAXQUOTAS value
MAXQUOTAS value defines maximum number of quota types VFS supports.
This isn't necessarily the number of types gfs2 supports and with
addition of project quotas these two numbers stop matching. So make gfs2
use its private definition.

CC: cluster-devel@redhat.com
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-09-11 10:59:56 +01:00
Bob Peterson 0e48e055a7 GFS2: Prevent recovery before the local journal is set
This patch uses a completion to prevent dlm's recovery process from
referencing and trying to recover a journal before a journal has been
opened.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-06-02 19:12:06 +01:00
Benjamin Marzinski 24972557b1 GFS2: remove transaction glock
GFS2 has a transaction glock, which must be grabbed for every
transaction, whose purpose is to deal with freezing the filesystem.
Aside from this involving a large amount of locking, it is very easy to
make the current fsfreeze code hang on unfreezing.

This patch rewrites how gfs2 handles freezing the filesystem. The
transaction glock is removed. In it's place is a freeze glock, which is
cached (but not held) in a shared state by every node in the cluster
when the filesystem is mounted. This lock only needs to be grabbed on
freezing, and actions which need to be safe from freezing, like
recovery.

When a node wants to freeze the filesystem, it grabs this glock
exclusively.  When the freeze glock state changes on the nodes (either
from shared to unlocked, or shared to exclusive), the filesystem does a
special log flush.  gfs2_log_flush() does all the work for flushing out
the and shutting down the incore log, and then it tries to grab the
freeze glock in a shared state again.  Since the filesystem is stuck in
gfs2_log_flush, no new transaction can start, and nothing can be written
to disk. Unfreezing the filesytem simply involes dropping the freeze
glock, allowing gfs2_log_flush() to grab and then release the shared
lock, so it is cached for next time.

However, in order for the unfreezing ioctl to occur, gfs2 needs to get a
shared lock on the filesystem root directory inode to check permissions.
If that glock has already been grabbed exclusively, fsfreeze will be
unable to get the shared lock and unfreeze the filesystem.

In order to allow the unfreeze, this patch makes gfs2 grab a shared lock
on the filesystem root directory during the freeze, and hold it until it
unfreezes the filesystem.  The functions which need to grab a shared
lock in order to allow the unfreeze ioctl to be issued now use the lock
grabbed by the freeze code instead.

The freeze and unfreeze code take care to make sure that this shared
lock will not be dropped while another process is using it.

Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-05-14 10:04:34 +01:00
Abhi Das 059788039f GFS2: Fix uninitialized VFS inode in gfs2_create_inode
When gfs2_create_inode() fails due to quota violation, the VFS
inode is not completely uninitialized. This can cause a list
corruption error.

This patch correctly uninitializes the VFS inode when a quota
violation occurs in the gfs2_create_inode codepath.

Resolves: rhbz#1059808
Signed-off-by: Abhi Das <adas@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-03-31 16:41:39 +01:00
Bob Peterson a17d758b66 GFS2: Move recovery variables to journal structure in memory
If multiple nodes fail and their recovery work runs simultaneously, they
would use the same unprotected variables in the superblock. For example,
they would stomp on each other's revoked blocks lists, which resulted
in file system metadata corruption. This patch moves the necessary
variables so that each journal has its own separate area for tracking
its journal replay.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-03-07 09:14:48 +00:00
Steven Whitehouse b50f227bdd GFS2: Clean up journal extent mapping
This patch fixes a long standing issue in mapping the journal
extents. Most journals will consist of only a single extent,
and although the cache took account of that by merging extents,
it did not actually map large extents, but instead was doing a
block by block mapping. Since the journal was only being mapped
on mount, this was not normally noticeable.

With the updated code, it is now possible to use the same extent
mapping system during journal recovery (which will be added in a
later patch). This will allow checking of the integrity of the
journal before any reply of the journal content is attempted. For
this reason the code is moving to bmap.c, since it will be used
more widely in due course.

An exercise left for the reader is to compare the new function
gfs2_map_journal_extents() with gfs2_write_alloc_required()

Additionally, should there be a failure, the error reporting is
also updated to show more detail about what went wrong.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-03-03 13:50:12 +00:00
Steven Whitehouse 022ef4feed GFS2: Move log buffer accounting to transaction
Now we have a master transaction into which other transactions
are merged, the accounting can be done using this master
transaction. We no longer require the superblock fields which
were being used for this function.

In addition, this allows for a clean up in calc_reserved()
making it rather easier understand. Also, by reducing the
number of variables used to track the buffers being added
and removed from the journal, a number of error checks are
now no longer required.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-02-24 19:49:12 +00:00
Steven Whitehouse d69a3c6561 GFS2: Move log buffer lists into transaction
Over time, we hope to be able to improve the concurrency available
in the log code. This is one small step towards that, by moving
the buffer lists from the super block, and into the transaction
structure, so that each transaction builds its own buffer lists.

At transaction commit time, the buffer lists are merged into
the currently accumulating transaction. That transaction then
is passed into the before and after commit functions at journal
flush time. Thus there should be no change in overall behaviour
yet.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-02-24 16:54:54 +00:00
Steven Whitehouse 654a6d2f96 GFS2: Reduce struct gfs2_trans in size
A couple of "int" fields were being used as boolean values
so we can make them bitfields of one bit, and put them in
what might otherwise be a hole in the structure with 64
bit alignment.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-02-21 11:52:00 +00:00
Steven Whitehouse ac3beb6a5d GFS2: Don't use ENOBUFS when ENOMEM is the correct error code
Al Viro has tactfully pointed out that we are using the incorrect
error code in some cases. This patch fixes that, and also removes
the (unused) return value for glock dumping.

>        * gfs2_iget() - ENOBUFS instead of ENOMEM.  ENOBUFS is
> "No buffer space available (POSIX.1 (XSI STREAMS option))" and since
> we don't support STREAMS it's probably fair game, but... what the hell?

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Al Viro <viro@ZenIV.linux.org.uk>
2014-01-16 10:31:13 +00:00
Steven Whitehouse 2d9e72303d GFS2: Move quota bitmap operations under their own lock
Gradually, the global qd_lock is being used for less and less.
After this patch it will only be used for the per super block
list whose purpose is to allow syncing of changes back to the
master quota file from the local quota changes file. Fixing
up that process to make it more efficient will be the subject
of a later patch, however this patch removes another barrier
to doing that.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Abhijith Das <adas@redhat.com>
2014-01-14 19:29:06 +00:00
Steven Whitehouse ee2411a8db GFS2: Clean up quota slot allocation
Quota slot allocation has historically used a vector of pages
and a set of homegrown find/test/set/clear bit functions. Since
the size of the bitmap is likely to be based on the default
qc file size, thats a couple of pages at most. So we ought
to be able to allocate that as a single chunk, with a vmalloc
fallback, just in case of memory fragmentation.

We are then able to use the kernel's own find/test/set/clear
bit functions, rather than rolling our own.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Abhijith Das <adas@redhat.com>
2014-01-14 19:28:49 +00:00
Steven Whitehouse c754fbbb1b GFS2: Use RCU/hlist_bl based hash for quotas
Prior to this patch, GFS2 kept all the quotas for each
super block in a single linked list. This is rather slow
when there are large numbers of quotas.

This patch introduces a hlist_bl based hash table, similar
to the one used for glocks. The initial look up of the quota
is now lockless in the case where it is already cached,
although we still have to take the per quota spinlock in
order to bump the ref count. Either way though, this is a
big improvement on what was there before.

The qd_lock and the per super block list is preserved, for
the time being. However it is intended that since this is no
longer used for its original role, it should be possible to
shrink the number of items on that list in due course and
remove the requirement to take qd_lock in qd_get.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Abhijith Das <adas@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
2014-01-14 19:27:56 +00:00
Steven Whitehouse 70d4ee94b3 GFS2: Use only a single address space for rgrps
Prior to this patch, GFS2 had one address space for each rgrp,
stored in the glock. This patch changes them to use a single
address space in the super block. This therefore saves
(sizeof(struct address_space) * nr_of_rgrps) bytes of memory
and for large filesystems, that can be significant.

It would be nice to be able to do something similar and merge
the inode metadata address space into the same global
address space. However, that is rather more complicated as the
on-disk location doesn't have a 1:1 mapping with the inodes in
general. So while it could be done, it will be a more complicated
operation as it requires changing a lot more code paths.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-01-03 10:01:50 +00:00
Steven Whitehouse 7005c3e4ae GFS2: Use range based functions for rgrp sync/invalidation
Each rgrp header is represented as a single extent on disk, so we
can calculate the position within the address space, since we are
using address spaces mapped 1:1 to the disk. This means that it
is possible to use the range based versions of filemap_fdatawrite/wait
and for invalidating the page cache.

Our eventual intent is to then be able to merge the address spaces
used for rgrps into a single address space, rather than to have
one for each glock, saving memory and reducing complexity.

Since during umount, the rgrp structures are disposed of before
the glocks, we need to store the extent information in the glock
so that is is available for a final invalidation. This patch uses
a field which is otherwise unused in rgrp glocks to do that, so
that we do not have to expand the size of a glock.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-01-03 10:00:31 +00:00
Bob Peterson 5ea5050cec GFS2: Implement a "rgrp has no extents longer than X" scheme
With the preceding patch, we started accepting block reservations
smaller than the ideal size, which requires a lot more parsing of the
bitmaps. To reduce the amount of bitmap searching, this patch
implements a scheme whereby each rgrp keeps track of the point
at this multi-block reservations will fail.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2014-01-03 09:58:08 +00:00
Steven Whitehouse 2147dbfd05 GFS2: Use generic list_lru for quota
By using the generic list_lru code, we can now separate the
per sb quota list locking from the lru locking. The lru
lock is made into the inner-most lock.

As a result of this new lock order, we may occasionally see
items on the per-sb quota list which are "dead" so that the
two places where we traverse that list are updated to take
account of that.

As a result of this patch, the gfs2 quota shrinker is now
NUMA zone aware, and we are also laying the foundations for
further improvments in due course.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Abhijith Das <adas@redhat.com>
Tested-by: Abhijith Das <adas@redhat.com>
Cc: Dave Chinner <dchinner@redhat.com>
2013-11-04 11:17:49 +00:00
Steven Whitehouse 9b9f039d57 GFS2: Use reflink for quota data cache
This patch adds reflink support to the quota data cache. It
looks a bit strange because we still don't have a sensible
split in the lookup by id and the lru list. That is coming in
later patches though.

The intent here is just to swap the current ref count for
reflinks in all cases with as little as possible other change.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Abhijith Das <adas@redhat.com>
Tested-by: Abhijith Das <adas@redhat.com>
2013-11-04 11:17:07 +00:00
Steven Whitehouse e66cf16109 GFS2: Use lockref for glocks
Currently glocks have an atomic reference count and also a spinlock
which covers various internal fields, such as the state. This intent of
this patch is to replace the spinlock and the atomic reference count
with a lockref structure. This contains a spinlock which we can continue
to use as before, and a reference counter which is used in conjuction
with the spinlock to replace the previous atomic counter.

As a result of this there are some new rules for reference counting on
glocks. We need to distinguish between reference count changes under
gl_spin (which are now just increment or decrement of the new counter,
provided the count cannot hit zero) and those which are outside of
gl_spin, but which now take gl_spin internally.

The conversion is relatively straight forward. There is probably some
further clean up which can be done, but the priority at this stage is to
make the change in as simple a manner as possible.

A consequence of this change is that the reference count is being
decoupled from the lru list processing. This should allow future
adoption of the lru_list code with glocks in due course.

The reason for using the "dead" state and not just relying on 0 being
the "invalid state" is so that in due course 0 ref counts can be
allowable. The intent is to eventually be able to remove the ref count
changes which are currently hidden away in state_change().

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-10-15 15:18:08 +01:00
Steven Whitehouse e46c772dba GFS2: Protect quota sync generation
Now that gfs2_quota_sync can be potentially called from multiple
threads, we should protect this bit of code, and the sync generation
number in particular in order to ensure that there are no races
when syncing quotas.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Abhijith Das <adas@redhat.com>
2013-10-04 12:29:34 +01:00
Steven Whitehouse bef292a72d GFS2: Remove obsolete quota tunable
There is no need for a paramater which relates to the internals
of quota to be exposed to users. The only possible use would be
to turn it up so large that the memory allocation fails. So lets
remove it and set it to a sensible value which ensures that we
don't ask for multipage allocations.

Currently the size of struct gfs2_holder means that the caluclated
value is identical to the previous default value, so there should
be no functional change.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Cc: Abhijith Das <adas@redhat.com>
2013-10-04 09:49:29 +01:00
Steven Whitehouse 7b9cff4671 GFS2: Add allocation parameters structure
This patch adds a structure to contain allocation parameters with
the intention of future expansion of this structure. The idea is
that we should be able to add more information about the allocation
in the future in order to allow the allocator to make a better job
of placing the requests on-disk.

There is no functional difference from applying this patch.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-10-02 11:13:25 +01:00
Bob Peterson e579ed4f44 GFS2: Introduce rbm field bii
This is a respin of the original patch. As Steve pointed out, the
introduction of field bii makes it easy to eliminate bi itself.
This revised patch does just that, replacing bi with bii.

This patch adds a new field to the rbm structure, called bii,
which is an index into the array of bitmaps for an rgrp.
This replaces *bi which was a pointer to the bitmap.
This is being done for further optimizations.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-09-18 10:39:53 +01:00
Bob Peterson 7e230f5774 GFS2: introduce bi_blocks for optimization
This patch introduces a new field in the bitmap structure called
bi_blocks. Its purpose is to save us from constantly multiplying
bi_len by the constant GFS2_NBBY. It also paves the way for more
optimization in a future patch.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-09-17 10:15:13 +01:00
Steven Whitehouse 81ffbf654f GFS2: Add origin indicator to glock callbacks
This patch adds a bool indicating whether the demote
request was originated locally or remotely. This is then
used by the iopen ->go_callback() to make 100% sure that
it will only respond to remote callbacks.

Since ->evict_inode() uses GL_NOCACHE when it attempts to
get an exclusive lock on the iopen lock, this may result
in extra scheduling of the workqueue in case that the
exclusive promotion request failed. This patch prevents
that from happening.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-04-10 10:26:55 +01:00
Benjamin Marzinski 16ca9412d8 GFS2: replace gfs2_ail structure with gfs2_trans
In order to allow transactions and log flushes to happen at the same
time, gfs2 needs to move the transaction accounting and active items
list code into the gfs2_trans structure.  As a first step toward this,
this patch removes the gfs2_ail structure, and handles the active items
list in the gfs_trans structure.  This keeps gfs2 from allocating an ail
structure on log flushes, and gives us a struture that can later be used
to store the transaction accounting outside of the gfs2 superblock
structure.

With this patch, at the end of a transaction, gfs2 will add the
gfs2_trans structure to the superblock if there is not one already.
This structure now has the active items fields that were previously in
gfs2_ail.  This is not necessary in the case where the transaction was
simply used to add revokes, since these are never written outside of the
journal, and thus, don't need an active items list.

Also, in order to make sure that the transaction structure is not
removed while it's still in use by gfs2_trans_end, unlocking the
sd_log_flush_lock has to happen slightly later in ending the
transaction.

Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-04-08 08:46:22 +01:00
David Teigland 57c7310b8e GFS2: use kmalloc for lvb bitmap
The temp lvb bitmap was on the stack, which could
be an alignment problem for __set_bit_le.  Use
kmalloc for it instead.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-04-04 09:52:14 +01:00
Linus Torvalds 94f2f14234 Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull user namespace and namespace infrastructure changes from Eric W Biederman:
 "This set of changes starts with a few small enhnacements to the user
  namespace.  reboot support, allowing more arbitrary mappings, and
  support for mounting devpts, ramfs, tmpfs, and mqueuefs as just the
  user namespace root.

  I do my best to document that if you care about limiting your
  unprivileged users that when you have the user namespace support
  enabled you will need to enable memory control groups.

  There is a minor bug fix to prevent overflowing the stack if someone
  creates way too many user namespaces.

  The bulk of the changes are a continuation of the kuid/kgid push down
  work through the filesystems.  These changes make using uids and gids
  typesafe which ensures that these filesystems are safe to use when
  multiple user namespaces are in use.  The filesystems converted for
  3.9 are ceph, 9p, afs, ocfs2, gfs2, ncpfs, nfs, nfsd, and cifs.  The
  changes for these filesystems were a little more involved so I split
  the changes into smaller hopefully obviously correct changes.

  XFS is the only filesystem that remains.  I was hoping I could get
  that in this release so that user namespace support would be enabled
  with an allyesconfig or an allmodconfig but it looks like the xfs
  changes need another couple of days before it they are ready."

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (93 commits)
  cifs: Enable building with user namespaces enabled.
  cifs: Convert struct cifs_ses to use a kuid_t and a kgid_t
  cifs: Convert struct cifs_sb_info to use kuids and kgids
  cifs: Modify struct smb_vol to use kuids and kgids
  cifs: Convert struct cifsFileInfo to use a kuid
  cifs: Convert struct cifs_fattr to use kuid and kgids
  cifs: Convert struct tcon_link to use a kuid.
  cifs: Modify struct cifs_unix_set_info_args to hold a kuid_t and a kgid_t
  cifs: Convert from a kuid before printing current_fsuid
  cifs: Use kuids and kgids SID to uid/gid mapping
  cifs: Pass GLOBAL_ROOT_UID and GLOBAL_ROOT_GID to keyring_alloc
  cifs: Use BUILD_BUG_ON to validate uids and gids are the same size
  cifs: Override unmappable incoming uids and gids
  nfsd: Enable building with user namespaces enabled.
  nfsd: Properly compare and initialize kuids and kgids
  nfsd: Store ex_anon_uid and ex_anon_gid as kuids and kgids
  nfsd: Modify nfsd4_cb_sec to use kuids and kgids
  nfsd: Handle kuids and kgids in the nfs4acl to posix_acl conversion
  nfsd: Convert nfsxdr to use kuids and kgids
  nfsd: Convert nfs3xdr to use kuids and kgids
  ...
2013-02-25 16:00:49 -08:00
Eric W. Biederman 05e0a60d80 gfs2: Store qd_id in struct gfs2_quota_data as a struct kqid
- Change qd_id in struct gfs2_qutoa_data to struct kqid.
- Remove the now unnecessary QDF_USER bit field in qd_flags.
- Propopoage this change through the code generally making
  things simpler along the way.

Cc: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
2013-02-13 06:15:07 -08:00
Steven Whitehouse fd95e81cb1 GFS2: Reinstate withdraw ack system
This patch reinstates the ack system which withdraw should be using. It
appears to have been accidentally forgotten when the lock module was
merged into GFS2, due to two different sysfs files having the same name.

Reported-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-02-13 12:21:40 +00:00
Steven Whitehouse 4513899092 GFS2: Use ->writepages for ordered writes
Instead of using a list of buffers to write ahead of the journal
flush, this now uses a list of inodes and calls ->writepages
via filemap_fdatawrite() in order to achieve the same thing. For
most use cases this results in a shorter ordered write list,
as well as much larger i/os being issued.

The ordered write list is sorted by inode number before writing
in order to retain the disk block ordering between inodes as
per the previous code.

The previous ordered write code used to conflict in its assumptions
about how to write out the disk blocks with mpage_writepages()
so that with this updated version we can also use mpage_writepages()
for GFS2's ordered write, writepages implementation. So we will
also send larger i/os from writeback too.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-01-29 10:29:17 +00:00
Steven Whitehouse d564053f07 GFS2: Clean up freeze code
The freeze code has not been looked at a lot recently. Upstream has
moved on, and this is an attempt to catch us back up again. There
is a vfs level interface for the freeze code which can be called
from our (obsolete, but kept for backward compatibility purposes)
sysfs freeze interface. This means freezing this way vs. doing it
from the ioctl should now work in identical fashion.

As a result of this, the freeze function is only called once
and we can drop our own special purpose code for counting the
number of freezes.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-01-29 10:29:05 +00:00
Steven Whitehouse 767f433f34 GFS2: Copy gfs2_trans_add_bh into new data/meta functions
This patch copies the body of gfs2_trans_add_bh into the two newly
added gfs2_trans_add_data and gfs2_trans_add_meta functions. We can
then move the .lo_add functions from lops.c into trans.c and call
them directly.

As a result of this, we no longer need to use the .lo_add functions
at all, so that is removed from the log operations structure.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2013-01-29 10:28:28 +00:00
David Teigland 4e2f8849de GFS2: remove redundant lvb pointer
The lksb struct already contains a pointer to the lvb,
so another directly from the glock struct is not needed.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-11-15 10:17:22 +00:00
David Teigland dba2d70c5d GFS2: only use lvb on glocks that need it
Save the effort of allocating, reading and writing
the lvb for most glocks that do not use it.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-11-15 10:16:59 +00:00
David Teigland fb6791d100 GFS2: skip dlm_unlock calls in unmount
When unmounting, gfs2 does a full dlm_unlock operation on every
cached lock.  This can create a very large amount of work and can
take a long time to complete.  However, the vast majority of these
dlm unlock operations are unnecessary because after all the unlocks
are done, gfs2 leaves the dlm lockspace, which automatically clears
the locks of the leaving node, without unlocking each one individually.
So, gfs2 can skip explicit dlm unlocks, and use dlm_release_lockspace to
remove the locks implicitly.  The one exception is when the lock's lvb is
being used.  In this case, dlm_unlock is called because it may update the
lvb of the resource.

Signed-off-by: David Teigland <teigland@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-11-14 09:37:04 +00:00
Bob Peterson 06dfc30641 GFS2: Rename glops go_xmote_th to go_sync
[Editorial: This is a nit, but has been a minor irritation for a long time:]

This patch renames glops structure item for go_xmote_th to go_sync.
The functionality is unchanged; it's just for readability.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-11-07 13:31:57 +00:00
Bob Peterson a68a0a352a GFS2: Speed up gfs2_rbm_from_block
This patch is a rewrite of function gfs2_rbm_from_block. Rather than
looping to find the right bitmap, the code now does a few simple
math calculations.

I compared the performance of both algorithms side by side and the new
algorithm is noticeably faster. Sample instrumentation output from a
"fast" machine:

5 million calls: millisec spent: Orig: 166 New: 113
5 million calls: millisec spent: Orig: 189 New: 114

In addition, I ran postmark (on a somewhat slowr CPU) before the after
the new algorithm was put in place and postmark showed a decent
improvement:

Before the new algorithm:
-------------------------
Time:
	645 seconds total
	584 seconds of transactions (171 per second)

Files:
	150087 created (232 per second)
		Creation alone: 100000 files (2083 per second)
		Mixed with transactions: 50087 files (85 per second)
	49995 read (85 per second)
	49991 appended (85 per second)
	150087 deleted (232 per second)
		Deletion alone: 100174 files (7705 per second)
		Mixed with transactions: 49913 files (85 per second)

Data:
	273.42 megabytes read (434.08 kilobytes per second)
	852.13 megabytes written (1.32 megabytes per second)

With the new algorithm:
-----------------------
Time:
	599 seconds total
	530 seconds of transactions (188 per second)

Files:
	150087 created (250 per second)
		Creation alone: 100000 files (1886 per second)
		Mixed with transactions: 50087 files (94 per second)
	49995 read (94 per second)
	49991 appended (94 per second)
	150087 deleted (250 per second)
		Deletion alone: 100174 files (6260 per second)
		Mixed with transactions: 49913 files (94 per second)

Data:
	273.42 megabytes read (467.42 kilobytes per second)
	852.13 megabytes written (1.42 megabytes per second)

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-11-07 13:31:36 +00:00
Steven Whitehouse ff7f4cb461 GFS2: Consolidate free block searching functions
With the recently added block reservation code, an additional function
was added to search for free blocks. This had a restriction of only being
able to search for aligned extents of free blocks. As a result the
allocation patterns when reserving blocks were suboptimal when the
existing allocation of blocks for an inode was not aligned to the same
boundary.

This patch resolves that problem by adding the ability for gfs2_rbm_find
to search for extents of a particular minimum size. We can then use
gfs2_rbm_find for both looking for reservations, and also looking for
free blocks on an individual basis when we actually come to do the
allocation later on. As a result we only need a single set of code
to deal with both situations.

The function gfs2_rbm_from_block() is moved up rgrp.c so that it
occurs before all of its callers.

Many thanks are due to Bob for helping track down the final issue in
this patch. That fix to the rb_tree traversal and to not share
block reservations from a dirctory to its children is included here.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
2012-09-24 10:47:26 +01:00
Steven Whitehouse 9e733d3923 GFS2: Improve block reservation tracing
This patch improves the tracing of block reservations by
removing some corner cases and also providing more useful
detail in the traces.

A new field is added to the reservation structure to contain
the inode number. This is used since in certain contexts it is
not possible to access the inode itself to obtain this information.
As a result we can then display the inode number for all tracepoints
and also in case we dump the resource group.

The "del" tracepoint operation has been removed. This could be called
with the reservation rgrp set to NULL. That resulted in not printing
the device number, and thus making the information largely useless
anyway. Also, the conditional on the rgrp being NULL can then be
removed from the tracepoint. After this change, all the block
reservation tracepoint calls will be called with the rgrp information.

The existing ins,clm and tdel calls to the block reservation tracepoint
are sufficient to track the entire life of the block reservation.

In gfs2_block_alloc() the error detection is updated to print out
the inode number of the problematic inode. This can then be compared
against the information in the glock dump,tracepoints, etc.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-24 10:47:20 +01:00
Steven Whitehouse 5b924ae2dc GFS2: Replace rgblk_search with gfs2_rbm_find
This is part of a series of patches which are introducing the
gfs2_rbm structure throughout the block allocation code. The
main aim of this part is to create a search function which can
deal directly with struct gfs2_rbm. In this case it specifies
the initial position at which to start the search and also the
point at which the search terminates.

The net result of this is to clean up the search code and make
it rather more readable, and the various possible exceptions which
may occur during the search are partitioned into their own functions.

There are some bug fixes too. We should not be checking the reservations
while allocating extents - the time for that is when we are searching
for where to put the extent, not when we've already made that decision.

Also, rgblk_search had two uses, and in only one of those cases did
it make sense to check for reservations. This is fixed in the new
gfs2_rbm_find function, which has a cleaner interface.

The reservation checking has been improved by always checking for
contiguous reservations, and returning the first free block after
all contiguous reservations. This is done under the spin lock to
ensure consistancy of the tree.

The allocation of extents is now in all cases done by the existing
allocation code, and if there is an active reservation, that is updated
after the fact. Again this is done under the spin lock, since it entails
changing the lookup key for the reservation in question.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-24 10:46:57 +01:00
Steven Whitehouse 4a993fb150 GFS2: Add structure to contain rgrp, bitmap, offset tuple
This patch introduces a new structure, gfs2_rbm, which is a
tuple of a resource group, a bitmap within the resource group
and an offset within that bitmap. This is designed to make
manipulating these sets of variables easier. There is also a
new helper function which converts this representation back
to a disk block address.

In addition, the rbtree nodes which are used for the reservations
were not being correctly initialised, which is now fixed. Also,
the tracing was not passing through the inode where it should
have been. That is mostly fixed aside from one corner case. This
needs to be revisited since there can also be a NULL rgrp in
some cases which results in the device being incorrect in the
trace.

This is intended to be the first step towards cleaning up some
of the allocation code, and some further bug fixes.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-24 10:46:56 +01:00
Steven Whitehouse 71f890f7f7 GFS2: Remove rs_requested field from reservations
The rs_requested field is left over from the original allocation
code, however this should have been a parameter passed to the
various functions from gfs2_inplace_reserve() and not a member of the
reservation structure as the value is not required after the
initial allocation.

This also helps simplify the code since we no longer need to set
the rs_requested to zero. Also the gfs2_inplace_release()
function can also be simplified since the reservation structure
will always be defined when it is called, and the only remaining
task is to unlock the rgrp if required. It can also now be
called unconditionally too, resulting in a further simplification.

Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-09-24 10:46:54 +01:00
Bob Peterson 8e2e004735 GFS2: Reduce file fragmentation
This patch reduces GFS2 file fragmentation by pre-reserving blocks. The
resulting improved on disk layout greatly speeds up operations in cases
which would have resulted in interlaced allocation of blocks previously.
A typical example of this is 10 parallel dd processes, each writing to a
file in a common dirctory.

The implementation uses an rbtree of reservations attached to each
resource group (and each inode).

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-07-19 14:51:08 +01:00
Benjamin Marzinski 90306c41dc GFS2: Use lvbs for storing rgrp information with mount option
Instead of reading in the resource groups when gfs2 is checking
for free space to allocate from, gfs2 can store the necessary infromation
in the resource group's lvb.  Also, instead of searching for unlinked
inodes in every resource group that's checked for free space, gfs2 can
store the number of unlinked but inodes in the lvb, and only check for
unlinked inodes if it will find some.

The first time a resource group is locked, the lvb must initialized.
Since this involves counting the unlinked inodes in the resource group,
this takes a little extra time.  But after that, if the resource group
is locked with GL_SKIP, the buffer head won't be read in unless it's
actually needed.

Enabling the resource groups lvbs is done via the rgrplvb mount option.  If
this option isn't set, the lvbs will still be set and updated, but they won't
be verfied or used by the filesystem.  To safely turn on this option, all of
the nodes mounting the filesystem must be running code with this patch, and
the filesystem must have been completely unmounted since they were updated.

Signed-off-by: Benjamin Marzinski <bmarzins@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-06-08 11:50:01 +01:00
Bob Peterson 5407e24229 GFS2: Fold quota data into the reservations struct
This patch moves the ancillary quota data structures into the
block reservations structure. This saves GFS2 some time and
effort in allocating and deallocating the qadata structure.

Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
2012-06-06 11:20:22 +01:00