Граф коммитов

85 Коммитов

Автор SHA1 Сообщение Дата
Linus Torvalds 0429fbc0bd Merge branch 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
Pull percpu consistent-ops changes from Tejun Heo:
 "Way back, before the current percpu allocator was implemented, static
  and dynamic percpu memory areas were allocated and handled separately
  and had their own accessors.  The distinction has been gone for many
  years now; however, the now duplicate two sets of accessors remained
  with the pointer based ones - this_cpu_*() - evolving various other
  operations over time.  During the process, we also accumulated other
  inconsistent operations.

  This pull request contains Christoph's patches to clean up the
  duplicate accessor situation.  __get_cpu_var() uses are replaced with
  with this_cpu_ptr() and __this_cpu_ptr() with raw_cpu_ptr().

  Unfortunately, the former sometimes is tricky thanks to C being a bit
  messy with the distinction between lvalues and pointers, which led to
  a rather ugly solution for cpumask_var_t involving the introduction of
  this_cpu_cpumask_var_ptr().

  This converts most of the uses but not all.  Christoph will follow up
  with the remaining conversions in this merge window and hopefully
  remove the obsolete accessors"

* 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (38 commits)
  irqchip: Properly fetch the per cpu offset
  percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t -fix
  ia64: sn_nodepda cannot be assigned to after this_cpu conversion. Use __this_cpu_write.
  percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t
  Revert "powerpc: Replace __get_cpu_var uses"
  percpu: Remove __this_cpu_ptr
  clocksource: Replace __this_cpu_ptr with raw_cpu_ptr
  sparc: Replace __get_cpu_var uses
  avr32: Replace __get_cpu_var with __this_cpu_write
  blackfin: Replace __get_cpu_var uses
  tile: Use this_cpu_ptr() for hardware counters
  tile: Replace __get_cpu_var uses
  powerpc: Replace __get_cpu_var uses
  alpha: Replace __get_cpu_var
  ia64: Replace __get_cpu_var uses
  s390: cio driver &__get_cpu_var replacements
  s390: Replace __get_cpu_var uses
  mips: Replace __get_cpu_var uses
  MIPS: Replace __get_cpu_var uses in FPU emulator.
  arm: Replace __this_cpu_ptr with raw_cpu_ptr
  ...
2014-10-15 07:48:18 +02:00
Chuansheng Liu c6f4459fc3 smp: Add new wake_up_all_idle_cpus() function
Currently kick_all_cpus_sync() can break non-polling idle cpus
thru IPI interrupts.

But sometimes we need to break the polling idle cpus immediately
to reselect the suitable c-state, also for non-idle cpus, we need
to do nothing if we try to wake up them.

Here adding one new function wake_up_all_idle_cpus() to let all cpus
out of idle based on function wake_up_if_idle().

Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: daniel.lezcano@linaro.org
Cc: rjw@rjwysocki.net
Cc: linux-pm@vger.kernel.org
Cc: changcheng.liu@intel.com
Cc: xiaoming.wang@intel.com
Cc: souvik.k.chakravarty@intel.com
Cc: luto@amacapital.net
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@fb.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: Roman Gushchin <klamm@yandex-team.ru>
Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1409815075-4180-2-git-send-email-chuansheng.liu@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-09-19 12:35:15 +02:00
Christoph Lameter bb964a92ce kernel misc: Replace __get_cpu_var uses
Replace uses of __get_cpu_var for address calculation with this_cpu_ptr.

Cc: akpm@linux-foundation.org
Signed-off-by: Christoph Lameter <cl@linux.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2014-08-26 13:45:44 -04:00
Sasha Levin 618fde8721 kernel/smp.c:on_each_cpu_cond(): fix warning in fallback path
The rarely-executed memry-allocation-failed callback path generates a
WARN_ON_ONCE() when smp_call_function_single() succeeds.  Presumably
it's supposed to warn on failures.

Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
Cc: Christoph Lameter <cl@gentwo.org>
Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Tejun Heo <htejun@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-08-06 18:01:22 -07:00
Ingo Molnar d26fad5b38 Linux 3.16-rc5
-----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQEcBAABAgAGBQJTwvRvAAoJEHm+PkMAQRiG8CoIAJucWkj+MJFFoDXjR9hfI8U7
 /WeQLJP0GpWGMXd2KznX9epCuw5rsuaPAxCy1HFDNOa7OtNYacWrsIhByxOIDLwL
 YjDB9+fpMMPFWsr+LPJa8Ombh/TveCS77w6Pt5VMZFwvIKujiNK/C3MdxjReH5Gr
 iTGm8x7nEs2D6L2+5sQVlhXot/97phxIlBSP6wPXEiaztNZ9/JZi905Xpgq+WU16
 ZOA8MlJj1TQD4xcWyUcsQ5REwIOdQ6xxPF00wv/12RFela+Puy4JLAilnV6Mc12U
 fwYOZKbUNBS8rjfDDdyX3sljV1L5iFFqKkW3WFdnv/z8ZaZSo5NupWuavDnifKw=
 =6Q8o
 -----END PGP SIGNATURE-----

Merge tag 'v3.16-rc5' into sched/core, to refresh the branch before applying bigger tree-wide changes

Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-07-16 15:10:07 +02:00
Srivatsa S. Bhat 8d056c48e4 CPU hotplug, smp: flush any pending IPI callbacks before CPU offline
There is a race between the CPU offline code (within stop-machine) and
the smp-call-function code, which can lead to getting IPIs on the
outgoing CPU, *after* it has gone offline.

Specifically, this can happen when using
smp_call_function_single_async() to send the IPI, since this API allows
sending asynchronous IPIs from IRQ disabled contexts.  The exact race
condition is described below.

During CPU offline, in stop-machine, we don't enforce any rule in the
_DISABLE_IRQ stage, regarding the order in which the outgoing CPU and
the other CPUs disable their local interrupts.  Due to this, we can
encounter a situation in which an IPI is sent by one of the other CPUs
to the outgoing CPU (while it is *still* online), but the outgoing CPU
ends up noticing it only *after* it has gone offline.

              CPU 1                                         CPU 2
          (Online CPU)                               (CPU going offline)

       Enter _PREPARE stage                          Enter _PREPARE stage

                                                     Enter _DISABLE_IRQ stage

                                                   =
       Got a device interrupt, and                 | Didn't notice the IPI
       the interrupt handler sent an               | since interrupts were
       IPI to CPU 2 using                          | disabled on this CPU.
       smp_call_function_single_async()            |
                                                   =

       Enter _DISABLE_IRQ stage

       Enter _RUN stage                              Enter _RUN stage

                                  =
       Busy loop with interrupts  |                  Invoke take_cpu_down()
       disabled.                  |                  and take CPU 2 offline
                                  =

       Enter _EXIT stage                             Enter _EXIT stage

       Re-enable interrupts                          Re-enable interrupts

                                                     The pending IPI is noted
                                                     immediately, but alas,
                                                     the CPU is offline at
                                                     this point.

This of course, makes the smp-call-function IPI handler code running on
CPU 2 unhappy and it complains about "receiving an IPI on an offline
CPU".

One real example of the scenario on CPU 1 is the block layer's
complete-request call-path:

	__blk_complete_request() [interrupt-handler]
	    raise_blk_irq()
	        smp_call_function_single_async()

However, if we look closely, the block layer does check that the target
CPU is online before firing the IPI.  So in this case, it is actually
the unfortunate ordering/timing of events in the stop-machine phase that
leads to receiving IPIs after the target CPU has gone offline.

In reality, getting a late IPI on an offline CPU is not too bad by
itself (this can happen even due to hardware latencies in IPI
send-receive).  It is a bug only if the target CPU really went offline
without executing all the callbacks queued on its list.  (Note that a
CPU is free to execute its pending smp-call-function callbacks in a
batch, without waiting for the corresponding IPIs to arrive for each one
of those callbacks).

So, fixing this issue can be broken up into two parts:

1. Ensure that a CPU goes offline only after executing all the
   callbacks queued on it.

2. Modify the warning condition in the smp-call-function IPI handler
   code such that it warns only if an offline CPU got an IPI *and* that
   CPU had gone offline with callbacks still pending in its queue.

Achieving part 1 is straight-forward - just flush (execute) all the
queued callbacks on the outgoing CPU in the CPU_DYING stage[1],
including those callbacks for which the source CPU's IPIs might not have
been received on the outgoing CPU yet.  Once we do this, an IPI that
arrives late on the CPU going offline (either due to the race mentioned
above, or due to hardware latencies) will be completely harmless, since
the outgoing CPU would have executed all the queued callbacks before
going offline.

Overall, this fix (parts 1 and 2 put together) additionally guarantees
that we will see a warning only when the *IPI-sender code* is buggy -
that is, if it queues the callback _after_ the target CPU has gone
offline.

[1].  The CPU_DYING part needs a little more explanation: by the time we
execute the CPU_DYING notifier callbacks, the CPU would have already
been marked offline.  But we want to flush out the pending callbacks at
this stage, ignoring the fact that the CPU is offline.  So restructure
the IPI handler code so that we can by-pass the "is-cpu-offline?" check
in this particular case.  (Of course, the right solution here is to fix
CPU hotplug to mark the CPU offline _after_ invoking the CPU_DYING
notifiers, but this requires a lot of audit to ensure that this change
doesn't break any existing code; hence lets go with the solution
proposed above until that is done).

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Suggested-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Gautham R Shenoy <ego@linux.vnet.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Mike Galbraith <mgalbraith@suse.de>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Cc: Rik van Riel <riel@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Sachin Kamat <sachin.kamat@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-23 16:47:43 -07:00
Frederic Weisbecker 4788501606 irq_work: Implement remote queueing
irq work currently only supports local callbacks. However its code
is mostly ready to run remote callbacks and we have some potential user.

The full nohz subsystem currently open codes its own remote irq work
on top of the scheduler ipi when it wants a CPU to reevaluate its next
tick. However this ad hoc solution bloats the scheduler IPI.

Lets just extend the irq work subsystem to support remote queuing on top
of the generic SMP IPI to handle this kind of user. This shouldn't add
noticeable overhead.

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Kevin Hilman <khilman@linaro.org>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
2014-06-16 16:26:54 +02:00
Srivatsa S. Bhat a219ccf463 smp: print more useful debug info upon receiving IPI on an offline CPU
There is a longstanding problem related to CPU hotplug which causes IPIs
to be delivered to offline CPUs, and the smp-call-function IPI handler
code prints out a warning whenever this is detected.  Every once in a
while this (usually harmless) warning gets reported on LKML, but so far
it has not been completely fixed.  Usually the solution involves finding
out the IPI sender and fixing it by adding appropriate synchronization
with CPU hotplug.

However, while going through one such internal bug reports, I found that
there is a significant bug in the receiver side itself (more
specifically, in stop-machine) that can lead to this problem even when
the sender code is perfectly fine.  This patchset fixes that
synchronization problem in the CPU hotplug stop-machine code.

Patch 1 adds some additional debug code to the smp-call-function
framework, to help debug such issues easily.

Patch 2 modifies the stop-machine code to ensure that any IPIs that were
sent while the target CPU was online, would be noticed and handled by
that CPU without fail before it goes offline.  Thus, this avoids
scenarios where IPIs are received on offline CPUs (as long as the sender
uses proper hotplug synchronization).

In fact, I debugged the problem by using Patch 1, and found that the
payload of the IPI was always the block layer's trigger_softirq()
function.  But I was not able to find anything wrong with the block
layer code.  That's when I started looking at the stop-machine code and
realized that there is a race-window which makes the IPI _receiver_ the
culprit, not the sender.  Patch 2 fixes that race and hence this should
put an end to most of the hard-to-debug IPI-to-offline-CPU issues.

This patch (of 2):

Today the smp-call-function code just prints a warning if we get an IPI
on an offline CPU.  This info is sufficient to let us know that
something went wrong, but often it is very hard to debug exactly who
sent the IPI and why, from this info alone.

In most cases, we get the warning about the IPI to an offline CPU,
immediately after the CPU going offline comes out of the stop-machine
phase and reenables interrupts.  Since all online CPUs participate in
stop-machine, the information regarding the sender of the IPI is already
lost by the time we exit the stop-machine loop.  So even if we dump the
stack on each CPU at this point, we won't find anything useful since all
of them will show the stack-trace of the stopper thread.  So we need a
better way to figure out who sent the IPI and why.

To achieve this, when we detect an IPI targeted to an offline CPU, loop
through the call-single-data linked list and print out the payload
(i.e., the name of the function which was supposed to be executed by the
target CPU).  This would give us an insight as to who might have sent
the IPI and help us debug this further.

[akpm@linux-foundation.org: correctly suppress warning output on second and later occurrences]
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Mike Galbraith <mgalbraith@suse.de>
Cc: Gautham R Shenoy <ego@linux.vnet.ibm.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Rafael J. Wysocki <rjw@rjwysocki.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-06-06 16:08:12 -07:00
Frederic Weisbecker c46fff2a3b smp: Rename __smp_call_function_single() to smp_call_function_single_async()
The name __smp_call_function_single() doesn't tell much about the
properties of this function, especially when compared to
smp_call_function_single().

The comments above the implementation are also misleading. The main
point of this function is actually not to be able to embed the csd
in an object. This is actually a requirement that result from the
purpose of this function which is to raise an IPI asynchronously.

As such it can be called with interrupts disabled. And this feature
comes at the cost of the caller who then needs to serialize the
IPIs on this csd.

Lets rename the function and enhance the comments so that they reflect
these properties.

Suggested-by: Christoph Hellwig <hch@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@fb.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-02-24 14:47:15 -08:00
Frederic Weisbecker fce8ad1568 smp: Remove wait argument from __smp_call_function_single()
The main point of calling __smp_call_function_single() is to send
an IPI in a pure asynchronous way. By embedding a csd in an object,
a caller can send the IPI without waiting for a previous one to complete
as is required by smp_call_function_single() for example. As such,
sending this kind of IPI can be safe even when irqs are disabled.

This flexibility comes at the expense of the caller who then needs to
synchronize the csd lifecycle by himself and make sure that IPIs on a
single csd are serialized.

This is how __smp_call_function_single() works when wait = 0 and this
usecase is relevant.

Now there don't seem to be any usecase with wait = 1 that can't be
covered by smp_call_function_single() instead, which is safer. Lets look
at the two possible scenario:

1) The user calls __smp_call_function_single(wait = 1) on a csd embedded
   in an object. It looks like a nice and convenient pattern at the first
   sight because we can then retrieve the object from the IPI handler easily.

   But actually it is a waste of memory space in the object since the csd
   can be allocated from the stack by smp_call_function_single(wait = 1)
   and the object can be passed an the IPI argument.

   Besides that, embedding the csd in an object is more error prone
   because the caller must take care of the serialization of the IPIs
   for this csd.

2) The user calls __smp_call_function_single(wait = 1) on a csd that
   is allocated on the stack. It's ok but smp_call_function_single()
   can do it as well and it already takes care of the allocation on the
   stack. Again it's more simple and less error prone.

Therefore, using the underscore prepend API version with wait = 1
is a bad pattern and a sign that the caller can do safer and more
simple.

There was a single user of that which has just been converted.
So lets remove this option to discourage further users.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@fb.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-02-24 14:47:09 -08:00
Frederic Weisbecker d7877c03f1 smp: Move __smp_call_function_single() below its safe version
Move this function closer to __smp_call_function_single(). These functions
have very similar behavior and should be displayed in the same block
for clarity.

Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@fb.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-02-24 14:47:01 -08:00
Frederic Weisbecker 8b28499a71 smp: Consolidate the various smp_call_function_single() declensions
__smp_call_function_single() and smp_call_function_single() share some
code that can be factorized: execute inline when the target is local,
check if the target is online, lock the csd, call generic_exec_single().

Lets move the common parts to generic_exec_single().

Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@fb.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-02-24 14:46:58 -08:00
Jan Kara 08eed44c72 smp: Teach __smp_call_function_single() to check for offline cpus
Align __smp_call_function_single() with smp_call_function_single() so
that it also checks whether requested cpu is still online.

Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-02-24 14:46:55 -08:00
Jan Kara 5fd77595ec smp: Iterate functions through llist_for_each_entry_safe()
The IPI function llist iteration is open coded. Lets simplify this
with using an llist iterator.

Also we want to keep the iteration safe against possible
csd.llist->next value reuse from the IPI handler. At least the block
subsystem used to do such things so lets stay careful and use
llist_for_each_entry_safe().

Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jens Axboe <axboe@fb.com>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
2014-02-24 14:46:47 -08:00
Roman Gushchin 73f945505b kernel/smp.c: remove cpumask_ipi
After commit 9a46ad6d6d ("smp: make smp_call_function_many() use logic
similar to smp_call_function_single()"), cfd->cpumask is accessed only
in smp_call_function_many().  So there is no more need to copy it into
cfd->cpumask_ipi before putting csd into the list.  The cpumask_ipi
field is obsolete and can be removed.

Signed-off-by: Roman Gushchin <klamm@yandex-team.ru>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Wang YanQing <udknight@gmail.com>
Cc: Xie XiuQi <xiexiuqi@huawei.com>
Cc: Shaohua Li <shli@fusionio.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-30 16:56:54 -08:00
Christoph Hellwig 6897fc22ea kernel: use lockless list for smp_call_function_single
Make smp_call_function_single and friends more efficient by using a
lockless list.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-30 16:56:54 -08:00
Christoph Hellwig ca5ecd64c2 kernel: fix generic_exec_single indentation
Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-15 09:32:22 +09:00
Christoph Hellwig 0a06ff068f kernel: remove CONFIG_USE_GENERIC_SMP_HELPERS
We've switched over every architecture that supports SMP to it, so
remove the new useless config variable.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-11-15 09:32:22 +09:00
Linus Torvalds 0910c0bdf7 Merge branch 'for-3.13/core' of git://git.kernel.dk/linux-block
Pull block IO core updates from Jens Axboe:
 "This is the pull request for the core changes in the block layer for
  3.13.  It contains:

   - The new blk-mq request interface.

     This is a new and more scalable queueing model that marries the
     best part of the request based interface we currently have (which
     is fully featured, but scales poorly) and the bio based "interface"
     which the new drivers for high IOPS devices end up using because
     it's much faster than the request based one.

     The bio interface has no block layer support, since it taps into
     the stack much earlier.  This means that drivers end up having to
     implement a lot of functionality on their own, like tagging,
     timeout handling, requeue, etc.  The blk-mq interface provides all
     these.  Some drivers even provide a switch to select bio or rq and
     has code to handle both, since things like merging only works in
     the rq model and hence is faster for some workloads.  This is a
     huge mess.  Conversion of these drivers nets us a substantial code
     reduction.  Initial results on converting SCSI to this model even
     shows an 8x improvement on single queue devices.  So while the
     model was intended to work on the newer multiqueue devices, it has
     substantial improvements for "classic" hardware as well.  This code
     has gone through extensive testing and development, it's now ready
     to go.  A pull request is coming to convert virtio-blk to this
     model will be will be coming as well, with more drivers scheduled
     for 3.14 conversion.

   - Two blktrace fixes from Jan and Chen Gang.

   - A plug merge fix from Alireza Haghdoost.

   - Conversion of __get_cpu_var() from Christoph Lameter.

   - Fix for sector_div() with 64-bit divider from Geert Uytterhoeven.

   - A fix for a race between request completion and the timeout
     handling from Jeff Moyer.  This is what caused the merge conflict
     with blk-mq/core, in case you are looking at that.

   - A dm stacking fix from Mike Snitzer.

   - A code consolidation fix and duplicated code removal from Kent
     Overstreet.

   - A handful of block bug fixes from Mikulas Patocka, fixing a loop
     crash and memory corruption on blk cg.

   - Elevator switch bug fix from Tomoki Sekiyama.

  A heads-up that I had to rebase this branch.  Initially the immutable
  bio_vecs had been queued up for inclusion, but a week later, it became
  clear that it wasn't fully cooked yet.  So the decision was made to
  pull this out and postpone it until 3.14.  It was a straight forward
  rebase, just pruning out the immutable series and the later fixes of
  problems with it.  The rest of the patches applied directly and no
  further changes were made"

* 'for-3.13/core' of git://git.kernel.dk/linux-block: (31 commits)
  block: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO
  block: replace IS_ERR and PTR_ERR with PTR_ERR_OR_ZERO
  block: Do not call sector_div() with a 64-bit divisor
  kernel: trace: blktrace: remove redundent memcpy() in compat_blk_trace_setup()
  block: Consolidate duplicated bio_trim() implementations
  block: Use rw_copy_check_uvector()
  block: Enable sysfs nomerge control for I/O requests in the plug list
  block: properly stack underlying max_segment_size to DM device
  elevator: acquire q->sysfs_lock in elevator_change()
  elevator: Fix a race in elevator switching and md device initialization
  block: Replace __get_cpu_var uses
  bdi: test bdi_init failure
  block: fix a probe argument to blk_register_region
  loop: fix crash if blk_alloc_queue fails
  blk-core: Fix memory corruption if blkcg_init_queue fails
  block: fix race between request completion and timeout handling
  blktrace: Send BLK_TN_PROCESS events to all running traces
  blk-mq: don't disallow request merges for req->special being set
  blk-mq: mq plug list breakage
  blk-mq: fix for flush deadlock
  ...
2013-11-14 12:08:14 +09:00
Jens Axboe c84a83e2aa smp: don't warn about csd->flags having CSD_FLAG_LOCK cleared for !wait
blk-mq reuses the request potentially immediately, since the most
cache hot is always given out first. This means that rq->csd could
be reused between csd->func() being called and csd_unlock() being
called. This isn't a problem, since we never use wait == 1 for
the smp call function. Add CSD_FLAG_WAIT to be able to tell the
difference, retaining the warning for other cases.

Cc: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-25 11:55:59 +01:00
Jens Axboe e3daab6ce4 smp: export __smp_call_function_single()
The blk-mq core and the blk-mq null driver uses it.

Reviewed-by: Christoph Hellwig <hch@lst.de>
Acked-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2013-10-25 11:55:59 +01:00
Borislav Petkov a17bce4d1d x86/boot: Further compress CPUs bootup message
Turn it into (for example):

[    0.073380] x86: Booting SMP configuration:
[    0.074005] .... node   #0, CPUs:          #1   #2   #3   #4   #5   #6   #7
[    0.603005] .... node   #1, CPUs:     #8   #9  #10  #11  #12  #13  #14  #15
[    1.200005] .... node   #2, CPUs:    #16  #17  #18  #19  #20  #21  #22  #23
[    1.796005] .... node   #3, CPUs:    #24  #25  #26  #27  #28  #29  #30  #31
[    2.393005] .... node   #4, CPUs:    #32  #33  #34  #35  #36  #37  #38  #39
[    2.996005] .... node   #5, CPUs:    #40  #41  #42  #43  #44  #45  #46  #47
[    3.600005] .... node   #6, CPUs:    #48  #49  #50  #51  #52  #53  #54  #55
[    4.202005] .... node   #7, CPUs:    #56  #57  #58  #59  #60  #61  #62  #63
[    4.811005] .... node   #8, CPUs:    #64  #65  #66  #67  #68  #69  #70  #71
[    5.421006] .... node   #9, CPUs:    #72  #73  #74  #75  #76  #77  #78  #79
[    6.032005] .... node  #10, CPUs:    #80  #81  #82  #83  #84  #85  #86  #87
[    6.648006] .... node  #11, CPUs:    #88  #89  #90  #91  #92  #93  #94  #95
[    7.262005] .... node  #12, CPUs:    #96  #97  #98  #99 #100 #101 #102 #103
[    7.865005] .... node  #13, CPUs:   #104 #105 #106 #107 #108 #109 #110 #111
[    8.466005] .... node  #14, CPUs:   #112 #113 #114 #115 #116 #117 #118 #119
[    9.073006] .... node  #15, CPUs:   #120 #121 #122 #123 #124 #125 #126 #127
[    9.679901] x86: Booted up 16 nodes, 128 CPUs

and drop useless elements.

Change num_digits() to hpa's division-avoiding, cell-phone-typed
version which he went at great lengths and pains to submit on a
Saturday evening.

Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: huawei.libin@huawei.com
Cc: wangyijing@huawei.com
Cc: fenghua.yu@intel.com
Cc: guohanjun@huawei.com
Cc: paul.gortmaker@windriver.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20130930095624.GB16383@pd.tnic
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-10-01 10:52:30 +02:00
David Daney 202da40057 kernel/smp.c: quit unconditionally enabling irqs in on_each_cpu_mask().
As in commit f21afc25f9 ("smp.h: Use local_irq_{save,restore}() in
!SMP version of on_each_cpu()"), we don't want to enable irqs if they
are not already enabled.

I don't know of any bugs currently caused by this unconditional
local_irq_enable(), but I want to use this function in MIPS/OCTEON early
boot (when we have early_boot_irqs_disabled).  This also makes this
function have similar semantics to on_each_cpu() which is good in
itself.

Signed-off-by: David Daney <david.daney@cavium.com>
Cc: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:58:25 -07:00
Chen Gang 60c323699b kernel/smp.c: free related resources when failure occurs in hotplug_cfd()
When failure occurs in hotplug_cfd(), need release related resources, or
will cause memory leak.

Signed-off-by: Chen Gang <gang.chen@asianux.com>
Acked-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-09-11 15:58:21 -07:00
Linus Torvalds 5e0b3a4e88 Merge branch 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler changes from Ingo Molnar:
 "Various optimizations, cleanups and smaller fixes - no major changes
  in scheduler behavior"

* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/fair: Fix the sd_parent_degenerate() code
  sched/fair: Rework and comment the group_imb code
  sched/fair: Optimize find_busiest_queue()
  sched/fair: Make group power more consistent
  sched/fair: Remove duplicate load_per_task computations
  sched/fair: Shrink sg_lb_stats and play memset games
  sched: Clean-up struct sd_lb_stat
  sched: Factor out code to should_we_balance()
  sched: Remove one division operation in find_busiest_queue()
  sched/cputime: Use this_cpu_add() in task_group_account_field()
  cpumask: Fix cpumask leak in partition_sched_domains()
  sched/x86: Optimize switch_mm() for multi-threaded workloads
  generic-ipi: Kill unnecessary variable - csd_flags
  numa: Mark __node_set() as __always_inline
  sched/fair: Cleanup: remove duplicate variable declaration
  sched/__wake_up_sync_key(): Fix nr_exclusive tasks which lead to WF_SYNC clearing
2013-09-04 08:36:35 -07:00
Xie XiuQi 15e71911fc generic-ipi/locking: Fix misleading smp_call_function_any() description
Fix locking description: after commit 8969a5ede0
("generic-ipi: remove kmalloc()"), wait = 0 can be guaranteed
because we don't kmalloc() anymore.

Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com>
Cc: Sheng Yang <sheng@linux.intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Link: http://lkml.kernel.org/r/51F5E6F8.1000801@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-08-19 09:03:50 +02:00
Xie XiuQi 46591962cb generic-ipi: Kill unnecessary variable - csd_flags
After commit 8969a5ede0
("generic-ipi: remove kmalloc()"), wait = 0 can be guaranteed,
and all callsites of generic_exec_single() do an unconditional
csd_lock() now.

So csd_flags is unnecessary now. Remove it.

Signed-off-by: Xie XiuQi <xiexiuqi@huawei.com>
Signed-off-by: Peter Zijlstra <peterz@infradead.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Nick Piggin <npiggin@suse.de>
Cc: Jens Axboe <jens.axboe@oracle.com>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Link: http://lkml.kernel.org/r/51F72DA1.7010401@huawei.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-07-30 22:19:05 +02:00
Paul Gortmaker 0db0628d90 kernel: delete __cpuinit usage from all core kernel files
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications.  For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.

After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out.  Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.

This removes all the uses of the __cpuinit macros from C files in
the core kernel directories (kernel, init, lib, mm, and include)
that don't really have a specific maintainer.

[1] https://lkml.org/lkml/2013/5/20/589

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-07-14 19:36:59 -04:00
Andrew Morton e1d12f3270 kernel/smp.c: cleanups
We sometimes use "struct call_single_data *data" and sometimes "struct
call_single_data *csd".  Use "csd" consistently.

We sometimes use "struct call_function_data *data" and sometimes "struct
call_function_data *cfd".  Use "cfd" consistently.

Also, avoid some 80-col layout tricks.

Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Shaohua Li <shli@fusionio.com>
Cc: Shaohua Li <shli@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 17:04:03 -07:00
liguang 1def1dc917 kernel/smp.c: use '|=' for csd_lock
csd_lock() uses assignment to data->flags rather than |=.  That is not
buggy at present because only one bit (CSD_FLAG_LOCK) is defined in
call_single_data.flags.

But it will become buggy if we later add another flag, so fix it now.

Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-30 17:04:02 -07:00
Shaohua Li 9a46ad6d6d smp: make smp_call_function_many() use logic similar to smp_call_function_single()
I'm testing swapout workload in a two-socket Xeon machine.  The workload
has 10 threads, each thread sequentially accesses separate memory
region.  TLB flush overhead is very big in the workload.  For each page,
page reclaim need move it from active lru list and then unmap it.  Both
need a TLB flush.  And this is a multthread workload, TLB flush happens
in 10 CPUs.  In X86, TLB flush uses generic smp_call)function.  So this
workload stress smp_call_function_many heavily.

Without patch, perf shows:
+  24.49%  [k] generic_smp_call_function_interrupt
-  21.72%  [k] _raw_spin_lock
   - _raw_spin_lock
      + 79.80% __page_check_address
      + 6.42% generic_smp_call_function_interrupt
      + 3.31% get_swap_page
      + 2.37% free_pcppages_bulk
      + 1.75% handle_pte_fault
      + 1.54% put_super
      + 1.41% grab_super_passive
      + 1.36% __swap_duplicate
      + 0.68% blk_flush_plug_list
      + 0.62% swap_info_get
+   6.55%  [k] flush_tlb_func
+   6.46%  [k] smp_call_function_many
+   5.09%  [k] call_function_interrupt
+   4.75%  [k] default_send_IPI_mask_sequence_phys
+   2.18%  [k] find_next_bit

swapout throughput is around 1300M/s.

With the patch, perf shows:
-  27.23%  [k] _raw_spin_lock
   - _raw_spin_lock
      + 80.53% __page_check_address
      + 8.39% generic_smp_call_function_single_interrupt
      + 2.44% get_swap_page
      + 1.76% free_pcppages_bulk
      + 1.40% handle_pte_fault
      + 1.15% __swap_duplicate
      + 1.05% put_super
      + 0.98% grab_super_passive
      + 0.86% blk_flush_plug_list
      + 0.57% swap_info_get
+   8.25%  [k] default_send_IPI_mask_sequence_phys
+   7.55%  [k] call_function_interrupt
+   7.47%  [k] smp_call_function_many
+   7.25%  [k] flush_tlb_func
+   3.81%  [k] _raw_spin_lock_irqsave
+   3.78%  [k] generic_smp_call_function_single_interrupt

swapout throughput is around 1400M/s.  So there is around a 7%
improvement, and total cpu utilization doesn't change.

Without the patch, cfd_data is shared by all CPUs.
generic_smp_call_function_interrupt does read/write cfd_data several times
which will create a lot of cache ping-pong.  With the patch, the data
becomes per-cpu.  The ping-pong is avoided.  And from the perf data, this
doesn't make call_single_queue lock contend.

Next step is to remove generic_smp_call_function_interrupt() from arch
code.

Signed-off-by: Shaohua Li <shli@fusionio.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-21 17:22:20 -08:00
Wang YanQing f44310b98d smp: Fix SMP function call empty cpu mask race
I get the following warning every day with v3.7, once or
twice a day:

  [ 2235.186027] WARNING: at /mnt/sda7/kernel/linux/arch/x86/kernel/apic/ipi.c:109 default_send_IPI_mask_logical+0x2f/0xb8()

As explained by Linus as well:

 |
 | Once we've done the "list_add_rcu()" to add it to the
 | queue, we can have (another) IPI to the target CPU that can
 | now see it and clear the mask.
 |
 | So by the time we get to actually send the IPI, the mask might
 | have been cleared by another IPI.
 |

This patch also fixes a system hang problem, if the data->cpumask
gets cleared after passing this point:

        if (WARN_ONCE(!mask, "empty IPI mask"))
                return;

then the problem in commit 83d349f35e ("x86: don't send an IPI to
the empty set of CPU's") will happen again.

Signed-off-by: Wang YanQing <udknight@gmail.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Jan Beulich <jbeulich@suse.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: peterz@infradead.org
Cc: mina86@mina86.org
Cc: srivatsa.bhat@linux.vnet.ibm.com
Cc: <stable@kernel.org>
Link: http://lkml.kernel.org/r/20130126075357.GA3205@udknight
[ Tidied up the changelog and the comment in the code. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-01-28 11:21:57 +01:00
Yong Zhang 8feb8e896d smp: Remove ipi_call_lock[_irq]()/ipi_call_unlock[_irq]()
There is no user of those APIs anymore, just remove it.

Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Cc: ralf@linux-mips.org
Cc: sshtylyov@mvista.com
Cc: david.daney@cavium.com
Cc: nikunj@linux.vnet.ibm.com
Cc: paulmck@linux.vnet.ibm.com
Cc: axboe@kernel.dk
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1338275765-3217-11-git-send-email-yong.zhang0@gmail.com
Acked-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-06-05 17:27:14 +02:00
Thomas Gleixner f37f435f33 smp: Implement kick_all_cpus_sync()
Will replace the misnomed cpu_idle_wait() function which is copied a
gazillion times all over arch/*

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20120507175652.049316594@linutronix.de
2012-05-08 12:35:06 +02:00
Suresh Siddha 3bb5d2ee39 smp, idle: Allocate idle thread for each possible cpu during boot
percpu areas are already allocated during boot for each possible cpu.
percpu idle threads can be considered as an extension of the percpu areas,
and allocate them for each possible cpu during boot.

This will eliminate the need for workqueue based idle thread allocation.
In future we can move the idle thread area into the percpu area too.

[ tglx: Moved the loop into smpboot.c and added an error check when
  the init code failed to allocate an idle thread for a cpu which
  should be onlined ]

Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: venki@google.com
Link: http://lkml.kernel.org/r/1334966930.28674.245.camel@sbsiddha-desk.sc.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2012-05-03 19:32:34 +02:00
Gilad Ben-Yossef b3a7e98e02 smp: add func to IPI cpus based on parameter func
Add the on_each_cpu_cond() function that wraps on_each_cpu_mask() and
calculates the cpumask of cpus to IPI by calling a function supplied as a
parameter in order to determine whether to IPI each specific cpu.

The function works around allocation failure of cpumask variable in
CONFIG_CPUMASK_OFFSTACK=y by itereating over cpus sending an IPI a time
via smp_call_function_single().

The function is useful since it allows to seperate the specific code that
decided in each case whether to IPI a specific cpu for a specific request
from the common boilerplate code of handling creating the mask, handling
failures etc.

[akpm@linux-foundation.org: s/gfpflags/gfp_flags/]
[akpm@linux-foundation.org: avoid double-evaluation of `info' (per Michal), parenthesise evaluation of `cond_func']
[akpm@linux-foundation.org: s/CPU/CPUs, use all 80 cols in comment]
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Sasha Levin <levinsasha928@gmail.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Avi Kivity <avi@redhat.com>
Acked-by: Michal Nazarewicz <mina86@mina86.org>
Cc: Kosaki Motohiro <kosaki.motohiro@gmail.com>
Cc: Milton Miller <miltonm@bga.com>
Reviewed-by: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-28 17:14:35 -07:00
Gilad Ben-Yossef 3fc498f165 smp: introduce a generic on_each_cpu_mask() function
We have lots of infrastructure in place to partition multi-core systems
such that we have a group of CPUs that are dedicated to specific task:
cgroups, scheduler and interrupt affinity, and cpuisol= boot parameter.
Still, kernel code will at times interrupt all CPUs in the system via IPIs
for various needs.  These IPIs are useful and cannot be avoided
altogether, but in certain cases it is possible to interrupt only specific
CPUs that have useful work to do and not the entire system.

This patch set, inspired by discussions with Peter Zijlstra and Frederic
Weisbecker when testing the nohz task patch set, is a first stab at trying
to explore doing this by locating the places where such global IPI calls
are being made and turning the global IPI into an IPI for a specific group
of CPUs.  The purpose of the patch set is to get feedback if this is the
right way to go for dealing with this issue and indeed, if the issue is
even worth dealing with at all.  Based on the feedback from this patch set
I plan to offer further patches that address similar issue in other code
paths.

This patch creates an on_each_cpu_mask() and on_each_cpu_cond()
infrastructure API (the former derived from existing arch specific
versions in Tile and Arm) and uses them to turn several global IPI
invocation to per CPU group invocations.

Core kernel:

on_each_cpu_mask() calls a function on processors specified by cpumask,
which may or may not include the local processor.

You must not call this function with disabled interrupts or from a
hardware interrupt handler or from a bottom half handler.

arch/arm:

Note that the generic version is a little different then the Arm one:

1. It has the mask as first parameter
2. It calls the function on the calling CPU with interrupts disabled,
   but this should be OK since the function is called on the other CPUs
   with interrupts disabled anyway.

arch/tile:

The API is the same as the tile private one, but the generic version
also calls the function on the with interrupts disabled in UP case

This is OK since the function is called on the other CPUs
with interrupts disabled.

Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
Reviewed-by: Christoph Lameter <cl@linux.com>
Acked-by: Chris Metcalf <cmetcalf@tilera.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Matt Mackall <mpm@selenic.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Sasha Levin <levinsasha928@gmail.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Avi Kivity <avi@redhat.com>
Acked-by: Michal Nazarewicz <mina86@mina86.org>
Cc: Kosaki Motohiro <kosaki.motohiro@gmail.com>
Cc: Milton Miller <miltonm@bga.com>
Cc: Russell King <linux@arm.linux.org.uk>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-03-28 17:14:35 -07:00
Paul Gortmaker 9984de1a5a kernel: Map most files to use export.h instead of module.h
The changed files were only including linux/module.h for the
EXPORT_SYMBOL infrastructure, and nothing else.  Revector them
onto the isolated export header for faster compile times.

Nothing to see here but a whole lot of instances of:

  -#include <linux/module.h>
  +#include <linux/export.h>

This commit is only changing the kernel dir; next targets
will probably be mm, fs, the arch dirs, etc.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31 09:20:12 -04:00
Takao Indoh d8ad7d1123 generic-ipi: Fix kexec boot crash by initializing call_single_queue before enabling interrupts
There is a problem that kdump(2nd kernel) sometimes hangs up due
to a pending IPI from 1st kernel. Kernel panic occurs because IPI
comes before call_single_queue is initialized.

To fix the crash, rename init_call_single_data() to call_function_init()
and call it in start_kernel() so that call_single_queue can be
initialized before enabling interrupts.

The details of the crash are:

 (1) 2nd kernel boots up

 (2) A pending IPI from 1st kernel comes when irqs are first enabled
     in start_kernel().

 (3) Kernel tries to handle the interrupt, but call_single_queue
     is not initialized yet at this point. As a result, in the
     generic_smp_call_function_single_interrupt(), NULL pointer
     dereference occurs when list_replace_init() tries to access
     &q->list.next.

Therefore this patch changes the name of init_call_single_data()
to call_function_init() and calls it before local_irq_enable()
in start_kernel().

Signed-off-by: Takao Indoh <indou.takao@jp.fujitsu.com>
Reviewed-by: WANG Cong <xiyou.wangcong@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Milton Miller <miltonm@bga.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: kexec@lists.infradead.org
Link: http://lkml.kernel.org/r/D6CBEE2F420741indou.takao@jp.fujitsu.com
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-06-17 10:17:12 +02:00
Amerigo Wang 34db18a054 smp: move smp setup functions to kernel/smp.c
Move setup_nr_cpu_ids(), smp_init() and some other SMP boot parameter
setup functions from init/main.c to kenrel/smp.c, saves some #ifdef
CONFIG_SMP.

Signed-off-by: WANG Cong <amwang@redhat.com>
Cc: Rakib Mullick <rakib.mullick@gmail.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Tejun Heo <tj@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-22 17:44:11 -07:00
Milton Miller c8def554d0 smp_call_function_interrupt: use typedef and %pf
Use the newly added smp_call_func_t in smp_call_function_interrupt for
the func variable, and make the comment above the WARN more assertive
and explicit.  Also, func is a function pointer and does not need an
offset, so use %pf not %pS.

Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-17 16:58:11 -07:00
Milton Miller 723aae25d5 smp_call_function_many: handle concurrent clearing of mask
Mike Galbraith reported finding a lockup ("perma-spin bug") where the
cpumask passed to smp_call_function_many was cleared by other cpu(s)
while a cpu was preparing its call_data block, resulting in no cpu to
clear the last ref and unlock the block.

Having cpus clear their bit asynchronously could be useful on a mask of
cpus that might have a translation context, or cpus that need a push to
complete an rcu window.

Instead of adding a BUG_ON and requiring yet another cpumask copy, just
detect the race and handle it.

Note: arch_send_call_function_ipi_mask must still handle an empty
cpumask because the data block is globally visible before the that arch
callback is made.  And (obviously) there are no guarantees to which cpus
are notified if the mask is changed during the call; only cpus that were
online and had their mask bit set during the whole call are guaranteed
to be called.

Reported-by: Mike Galbraith <efault@gmx.de>
Reported-by: Jan Beulich <JBeulich@novell.com>
Acked-by: Jan Beulich <jbeulich@novell.com>
Cc: stable@kernel.org
Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-17 16:58:10 -07:00
Milton Miller 45a5791920 call_function_many: add missing ordering
Paul McKenney's review pointed out two problems with the barriers in the
2.6.38 update to the smp call function many code.

First, a barrier that would force the func and info members of data to
be visible before their consumption in the interrupt handler was
missing.  This can be solved by adding a smp_wmb between setting the
func and info members and setting setting the cpumask; this will pair
with the existing and required smp_rmb ordering the cpumask read before
the read of refs.  This placement avoids the need a second smp_rmb in
the interrupt handler which would be executed on each of the N cpus
executing the call request.  (I was thinking this barrier was present
but was not).

Second, the previous write to refs (establishing the zero that we the
interrupt handler was testing from all cpus) was performed by a third
party cpu.  This would invoke transitivity which, as a recient or
concurrent addition to memory-barriers.txt now explicitly states, would
require a full smp_mb().

However, we know the cpumask will only be set by one cpu (the data
owner) and any preivous iteration of the mask would have cleared by the
reading cpu.  By redundantly writing refs to 0 on the owning cpu before
the smp_wmb, the write to refs will follow the same path as the writes
that set the cpumask, which in turn allows us to keep the barrier in the
interrupt handler a smp_rmb instead of promoting it to a smp_mb (which
will be be executed by N cpus for each of the possible M elements on the
list).

I moved and expanded the comment about our (ab)use of the rcu list
primitives for the concurrent walk earlier into this function.  I
considered moving the first two paragraphs to the queue list head and
lock, but felt it would have been too disconected from the code.

Cc: Paul McKinney <paulmck@linux.vnet.ibm.com>
Cc: stable@kernel.org (2.6.32 and later)
Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-17 16:58:10 -07:00
Milton Miller e6cd1e07a1 call_function_many: fix list delete vs add race
Peter pointed out there was nothing preventing the list_del_rcu in
smp_call_function_interrupt from running before the list_add_rcu in
smp_call_function_many.

Fix this by not setting refs until we have gotten the lock for the list.
Take advantage of the wmb in list_add_rcu to save an explicit additional
one.

I tried to force this race with a udelay before the lock & list_add and
by mixing all 64 online cpus with just 3 random cpus in the mask, but
was unsuccessful.  Still, inspection shows a valid race, and the fix is
a extension of the existing protection window in the current code.

Cc: stable@kernel.org (v2.6.32 and later)
Reported-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Milton Miller <miltonm@bga.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-17 16:58:10 -07:00
Linus Torvalds 2b1caf6ed7 Merge branch 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  smp: Allow on_each_cpu() to be called while early_boot_irqs_disabled status to init/main.c
  lockdep: Move early boot local IRQ enable/disable status to init/main.c
2011-01-20 18:30:37 -08:00
Milton Miller 225c8e010f kernel/smp.c: consolidate writes in smp_call_function_interrupt()
We have to test the cpu mask in the interrupt handler before checking the
refs, otherwise we can start to follow an entry before its deleted and
find it partially initailzed for the next trip.  Presently we also clear
the cpumask bit before executing the called function, which implies
getting write access to the line.  After the function is called we then
decrement refs, and if they go to zero we then unlock the structure.

However, this implies getting write access to the call function data
before and after another the function is called.  If we can assert that no
smp_call_function execution function is allowed to enable interrupts, then
we can move both writes to after the function is called, hopfully allowing
both writes with one cache line bounce.

On a 256 thread system with a kernel compiled for 1024 threads, the time
to execute testcase in the "smp_call_function_many race" changelog was
reduced by about 30-40ms out of about 545 ms.

I decided to keep this as WARN because its now a buggy function, even
though the stack trace is of no value -- a simple printk would give us the
information needed.

Raw data:

Without patch:
  ipi_test startup took 1219366ns complete 539819014ns total 541038380ns
  ipi_test startup took 1695754ns complete 543439872ns total 545135626ns
  ipi_test startup took 7513568ns complete 539606362ns total 547119930ns
  ipi_test startup took 13304064ns complete 533898562ns total 547202626ns
  ipi_test startup took 8668192ns complete 544264074ns total 552932266ns
  ipi_test startup took 4977626ns complete 548862684ns total 553840310ns
  ipi_test startup took 2144486ns complete 541292318ns total 543436804ns
  ipi_test startup took 21245824ns complete 530280180ns total 551526004ns

With patch:
  ipi_test startup took 5961748ns complete 500859628ns total 506821376ns
  ipi_test startup took 8975996ns complete 495098924ns total 504074920ns
  ipi_test startup took 19797750ns complete 492204740ns total 512002490ns
  ipi_test startup took 14824796ns complete 487495878ns total 502320674ns
  ipi_test startup took 11514882ns complete 494439372ns total 505954254ns
  ipi_test startup took 8288084ns complete 502570774ns total 510858858ns
  ipi_test startup took 6789954ns complete 493388112ns total 500178066ns

	#include <linux/module.h>
	#include <linux/init.h>
	#include <linux/sched.h> /* sched clock */

	#define ITERATIONS 100

	static void do_nothing_ipi(void *dummy)
	{
	}

	static void do_ipis(struct work_struct *dummy)
	{
		int i;

		for (i = 0; i < ITERATIONS; i++)
			smp_call_function(do_nothing_ipi, NULL, 1);

		printk(KERN_DEBUG "cpu %d finished\n", smp_processor_id());
	}

	static struct work_struct work[NR_CPUS];

	static int __init testcase_init(void)
	{
		int cpu;
		u64 start, started, done;

		start = local_clock();
		for_each_online_cpu(cpu) {
			INIT_WORK(&work[cpu], do_ipis);
			schedule_work_on(cpu, &work[cpu]);
		}
		started = local_clock();
		for_each_online_cpu(cpu)
			flush_work(&work[cpu]);
		done = local_clock();
		pr_info("ipi_test startup took %lldns complete %lldns total %lldns\n",
			started-start, done-started, done-start);

		return 0;
	}

	static void __exit testcase_exit(void)
	{
	}

	module_init(testcase_init)
	module_exit(testcase_exit)
	MODULE_LICENSE("GPL");
	MODULE_AUTHOR("Anton Blanchard");

Signed-off-by: Milton Miller <miltonm@bga.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-20 17:02:06 -08:00
Anton Blanchard 6dc1989995 kernel/smp.c: fix smp_call_function_many() SMP race
I noticed a failure where we hit the following WARN_ON in
generic_smp_call_function_interrupt:

                if (!cpumask_test_and_clear_cpu(cpu, data->cpumask))
                        continue;

                data->csd.func(data->csd.info);

                refs = atomic_dec_return(&data->refs);
                WARN_ON(refs < 0);      <-------------------------

We atomically tested and cleared our bit in the cpumask, and yet the
number of cpus left (ie refs) was 0.  How can this be?

It turns out commit 54fdade1c3
("generic-ipi: make struct call_function_data lockless") is at fault.  It
removes locking from smp_call_function_many and in doing so creates a
rather complicated race.

The problem comes about because:

 - The smp_call_function_many interrupt handler walks call_function.queue
   without any locking.
 - We reuse a percpu data structure in smp_call_function_many.
 - We do not wait for any RCU grace period before starting the next
   smp_call_function_many.

Imagine a scenario where CPU A does two smp_call_functions back to back,
and CPU B does an smp_call_function in between.  We concentrate on how CPU
C handles the calls:

CPU A            CPU B                  CPU C              CPU D

smp_call_function
                                        smp_call_function_interrupt
                                            walks
					call_function.queue sees
					data from CPU A on list

                 smp_call_function

                                        smp_call_function_interrupt
                                            walks

                                        call_function.queue sees
                                          (stale) CPU A on list
							   smp_call_function int
							   clears last ref on A
							   list_del_rcu, unlock
smp_call_function reuses
percpu *data A
                                         data->cpumask sees and
                                         clears bit in cpumask
                                         might be using old or new fn!
                                         decrements refs below 0

set data->refs (too late!)

The important thing to note is since the interrupt handler walks a
potentially stale call_function.queue without any locking, then another
cpu can view the percpu *data structure at any time, even when the owner
is in the process of initialising it.

The following test case hits the WARN_ON 100% of the time on my PowerPC
box (having 128 threads does help :)

#include <linux/module.h>
#include <linux/init.h>

#define ITERATIONS 100

static void do_nothing_ipi(void *dummy)
{
}

static void do_ipis(struct work_struct *dummy)
{
	int i;

	for (i = 0; i < ITERATIONS; i++)
		smp_call_function(do_nothing_ipi, NULL, 1);

	printk(KERN_DEBUG "cpu %d finished\n", smp_processor_id());
}

static struct work_struct work[NR_CPUS];

static int __init testcase_init(void)
{
	int cpu;

	for_each_online_cpu(cpu) {
		INIT_WORK(&work[cpu], do_ipis);
		schedule_work_on(cpu, &work[cpu]);
	}

	return 0;
}

static void __exit testcase_exit(void)
{
}

module_init(testcase_init)
module_exit(testcase_exit)
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Anton Blanchard");

I tried to fix it by ordering the read and the write of ->cpumask and
->refs.  In doing so I missed a critical case but Paul McKenney was able
to spot my bug thankfully :) To ensure we arent viewing previous
iterations the interrupt handler needs to read ->refs then ->cpumask then
->refs _again_.

Thanks to Milton Miller and Paul McKenney for helping to debug this issue.

[miltonm@bga.com: add WARN_ON and BUG_ON, remove extra read of refs before initial read of mask that doesn't help (also noted by Peter Zijlstra), adjust comments, hopefully clarify scenario ]
[miltonm@bga.com: remove excess tests]
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Milton Miller <miltonm@bga.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: <stable@kernel.org> [2.6.32+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-20 17:02:06 -08:00
Tejun Heo bd924e8cbd smp: Allow on_each_cpu() to be called while early_boot_irqs_disabled status to init/main.c
percpu may end up calling vfree() during early boot which in
turn may call on_each_cpu() for TLB flushes.  The function of
on_each_cpu() can be done safely while IRQ is disabled during
early boot but it assumed that the function is always called
with local IRQ enabled which ended up enabling local IRQ
prematurely during boot and triggering a couple of warnings.

This patch updates on_each_cpu() and smp_call_function_many()
such on_each_cpu() can be used safely while
early_boot_irqs_disabled is set.

Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: Pekka Enberg <penberg@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
LKML-Reference: <20110120110713.GC6036@htj.dyndns.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Reported-by: Ingo Molnar <mingo@elte.hu>
2011-01-20 13:32:34 +01:00
Amerigo Wang 351f8f8e64 kernel: clean up USE_GENERIC_SMP_HELPERS
For arch which needs USE_GENERIC_SMP_HELPERS, it has to select
USE_GENERIC_SMP_HELPERS, rather than leaving a choice to user, since they
don't provide their own implementions.

Also, move on_each_cpu() to kernel/smp.c, it is strange to put it in
kernel/softirq.c.

For arch which doesn't use USE_GENERIC_SMP_HELPERS, e.g.  blackfin, only
on_each_cpu() is compiled.

Signed-off-by: Amerigo Wang <amwang@redhat.com>
Cc: David Howells <dhowells@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-13 08:03:08 -08:00
David Howells 3a5f65df5a Typedef SMP call function pointer
Typedef the pointer to the function to be called by smp_call_function() and
friends:

	typedef void (*smp_call_func_t)(void *info);

as it is used in a fair number of places.

Signed-off-by: David Howells <dhowells@redhat.com>
cc: linux-arch@vger.kernel.org
2010-10-27 17:28:36 +01:00