Граф коммитов

22 Коммитов

Автор SHA1 Сообщение Дата
Linus Torvalds 9e4b0d55d8 Merge branch 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu:
 "API:
   - Add speed testing on 1420-byte blocks for networking

  Algorithms:
   - Improve performance of chacha on ARM for network packets
   - Improve performance of aegis128 on ARM for network packets

  Drivers:
   - Add support for Keem Bay OCS AES/SM4
   - Add support for QAT 4xxx devices
   - Enable crypto-engine retry mechanism in caam
   - Enable support for crypto engine on sdm845 in qce
   - Add HiSilicon PRNG driver support"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (161 commits)
  crypto: qat - add capability detection logic in qat_4xxx
  crypto: qat - add AES-XTS support for QAT GEN4 devices
  crypto: qat - add AES-CTR support for QAT GEN4 devices
  crypto: atmel-i2c - select CONFIG_BITREVERSE
  crypto: hisilicon/trng - replace atomic_add_return()
  crypto: keembay - Add support for Keem Bay OCS AES/SM4
  dt-bindings: Add Keem Bay OCS AES bindings
  crypto: aegis128 - avoid spurious references crypto_aegis128_update_simd
  crypto: seed - remove trailing semicolon in macro definition
  crypto: x86/poly1305 - Use TEST %reg,%reg instead of CMP $0,%reg
  crypto: x86/sha512 - Use TEST %reg,%reg instead of CMP $0,%reg
  crypto: aesni - Use TEST %reg,%reg instead of CMP $0,%reg
  crypto: cpt - Fix sparse warnings in cptpf
  hwrng: ks-sa - Add dependency on IOMEM and OF
  crypto: lib/blake2s - Move selftest prototype into header file
  crypto: arm/aes-ce - work around Cortex-A57/A72 silion errata
  crypto: ecdh - avoid unaligned accesses in ecdh_set_secret()
  crypto: ccree - rework cache parameters handling
  crypto: cavium - Use dma_set_mask_and_coherent to simplify code
  crypto: marvell/octeontx - Use dma_set_mask_and_coherent to simplify code
  ...
2020-12-14 12:18:19 -08:00
Eric Biggers bde4933490 fs-verity: move structs needed for file signing to UAPI header
Although it isn't used directly by the ioctls,
"struct fsverity_descriptor" is required by userspace programs that need
to compute fs-verity file digests in a standalone way.  Therefore
it's also needed to sign files in a standalone way.

Similarly, "struct fsverity_formatted_digest" (previously called
"struct fsverity_signed_digest" which was misleading) is also needed to
sign files if the built-in signature verification is being used.

Therefore, move these structs to the UAPI header.

While doing this, try to make it clear that the signature-related fields
in fsverity_descriptor aren't used in the file digest computation.

Acked-by: Luca Boccassi <luca.boccassi@microsoft.com>
Link: https://lore.kernel.org/r/20201113211918.71883-5-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-11-23 19:30:14 -08:00
Eric Biggers a24d22b225 crypto: sha - split sha.h into sha1.h and sha2.h
Currently <crypto/sha.h> contains declarations for both SHA-1 and SHA-2,
and <crypto/sha3.h> contains declarations for SHA-3.

This organization is inconsistent, but more importantly SHA-1 is no
longer considered to be cryptographically secure.  So to the extent
possible, SHA-1 shouldn't be grouped together with any of the other SHA
versions, and usage of it should be phased out.

Therefore, split <crypto/sha.h> into two headers <crypto/sha1.h> and
<crypto/sha2.h>, and make everyone explicitly specify whether they want
the declarations for SHA-1, SHA-2, or both.

This avoids making the SHA-1 declarations visible to files that don't
want anything to do with SHA-1.  It also prepares for potentially moving
sha1.h into a new insecure/ or dangerous/ directory.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2020-11-20 14:45:33 +11:00
Eric Biggers ed45e20164 fs-verity: rename "file measurement" to "file digest"
I originally chose the name "file measurement" to refer to the fs-verity
file digest to avoid confusion with traditional full-file digests or
with the bare root hash of the Merkle tree.

But the name "file measurement" hasn't caught on, and usually people are
calling it something else, usually the "file digest".  E.g. see
"struct fsverity_digest" and "struct fsverity_formatted_digest", the
libfsverity_compute_digest() and libfsverity_sign_digest() functions in
libfsverity, and the "fsverity digest" command.

Having multiple names for the same thing is always confusing.

So to hopefully avoid confusion in the future, rename
"fs-verity file measurement" to "fs-verity file digest".

This leaves FS_IOC_MEASURE_VERITY as the only reference to "measure" in
the kernel, which makes some amount of sense since the ioctl is actively
"measuring" the file.

I'll be renaming this in fsverity-utils too (though similarly the
'fsverity measure' command, which is a wrapper for
FS_IOC_MEASURE_VERITY, will stay).

Acked-by: Luca Boccassi <luca.boccassi@microsoft.com>
Link: https://lore.kernel.org/r/20201113211918.71883-4-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-11-16 11:40:12 -08:00
Eric Biggers 9e90f30e78 fs-verity: rename fsverity_signed_digest to fsverity_formatted_digest
The name "struct fsverity_signed_digest" is causing confusion because it
isn't actually a signed digest, but rather it's the way that the digest
is formatted in order to be signed.  Rename it to
"struct fsverity_formatted_digest" to prevent this confusion.

Also update the struct's comment to clarify that it's specific to the
built-in signature verification support and isn't a requirement for all
fs-verity users.

I'll be renaming this struct in fsverity-utils too.

Acked-by: Luca Boccassi <luca.boccassi@microsoft.com>
Link: https://lore.kernel.org/r/20201113211918.71883-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-11-16 11:40:11 -08:00
Eric Biggers 7bf765dd84 fs-verity: remove filenames from file comments
Embedding the file path inside kernel source code files isn't
particularly useful as often files are moved around and the paths become
incorrect.  checkpatch.pl warns about this since v5.10-rc1.

Acked-by: Luca Boccassi <luca.boccassi@microsoft.com>
Link: https://lore.kernel.org/r/20201113211918.71883-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-11-16 11:40:10 -08:00
Eric Biggers f3db0bed45 fs-verity: use smp_load_acquire() for ->i_verity_info
Normally smp_store_release() or cmpxchg_release() is paired with
smp_load_acquire().  Sometimes smp_load_acquire() can be replaced with
the more lightweight READ_ONCE().  However, for this to be safe, all the
published memory must only be accessed in a way that involves the
pointer itself.  This may not be the case if allocating the object also
involves initializing a static or global variable, for example.

fsverity_info::tree_params.hash_alg->tfm is a crypto_ahash object that's
internal to and is allocated by the crypto subsystem.  So by using
READ_ONCE() for ->i_verity_info, we're relying on internal
implementation details of the crypto subsystem.

Remove this fragile assumption by using smp_load_acquire() instead.

Also fix the cmpxchg logic to correctly execute an ACQUIRE barrier when
losing the cmpxchg race, since cmpxchg doesn't guarantee a memory
barrier on failure.

(Note: I haven't seen any real-world problems here.  This change is just
fixing the code to be guaranteed correct and less fragile.)

Fixes: fd2d1acfca ("fs-verity: add the hook for file ->open()")
Link: https://lore.kernel.org/r/20200721225920.114347-6-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-07-21 16:02:41 -07:00
Eric Biggers 9cd6b593cf fs-verity: remove unnecessary extern keywords
Remove the unnecessary 'extern' keywords from function declarations.
This makes it so that we don't have a mix of both styles, so it won't be
ambiguous what to use in new fs-verity patches.  This also makes the
code shorter and matches the 'checkpatch --strict' expectation.

Link: https://lore.kernel.org/r/20200511192118.71427-3-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-05-12 16:44:00 -07:00
Eric Biggers 6377a38bd3 fs-verity: fix all kerneldoc warnings
Fix all kerneldoc warnings in fs/verity/ and include/linux/fsverity.h.
Most of these were due to missing documentation for function parameters.

Detected with:

    scripts/kernel-doc -v -none fs/verity/*.{c,h} include/linux/fsverity.h

This cleanup makes it possible to check new patches for kerneldoc
warnings without having to filter out all the existing ones.

Link: https://lore.kernel.org/r/20200511192118.71427-2-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-05-12 16:43:59 -07:00
Eric Biggers da3a3da4e6 fs-verity: use u64_to_user_ptr()
<linux/kernel.h> already provides a macro u64_to_user_ptr().
Use it instead of open-coding the two casts.

No change in behavior.

Link: https://lore.kernel.org/r/20191231175408.20524-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-01-14 13:28:28 -08:00
Eric Biggers 439bea104c fs-verity: use mempool for hash requests
When initializing an fs-verity hash algorithm, also initialize a mempool
that contains a single preallocated hash request object.  Then replace
the direct calls to ahash_request_alloc() and ahash_request_free() with
allocating and freeing from this mempool.

This eliminates the possibility of the allocation failing, which is
desirable for the I/O path.

This doesn't cause deadlocks because there's no case where multiple hash
requests are needed at a time to make forward progress.

Link: https://lore.kernel.org/r/20191231175545.20709-1-ebiggers@kernel.org
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-01-14 13:28:05 -08:00
Eric Biggers fd39073dba fs-verity: implement readahead of Merkle tree pages
When fs-verity verifies data pages, currently it reads each Merkle tree
page synchronously using read_mapping_page().

Therefore, when the Merkle tree pages aren't already cached, fs-verity
causes an extra 4 KiB I/O request for every 512 KiB of data (assuming
that the Merkle tree uses SHA-256 and 4 KiB blocks).  This results in
more I/O requests and performance loss than is strictly necessary.

Therefore, implement readahead of the Merkle tree pages.

For simplicity, we take advantage of the fact that the kernel already
does readahead of the file's *data*, just like it does for any other
file.  Due to this, we don't really need a separate readahead state
(struct file_ra_state) just for the Merkle tree, but rather we just need
to piggy-back on the existing data readahead requests.

We also only really need to bother with the first level of the Merkle
tree, since the usual fan-out factor is 128, so normally over 99% of
Merkle tree I/O requests are for the first level.

Therefore, make fsverity_verify_bio() enable readahead of the first
Merkle tree level, for up to 1/4 the number of pages in the bio, when it
sees that the REQ_RAHEAD flag is set on the bio.  The readahead size is
then passed down to ->read_merkle_tree_page() for the filesystem to
(optionally) implement if it sees that the requested page is uncached.

While we're at it, also make build_merkle_tree_level() set the Merkle
tree readahead size, since it's easy to do there.

However, for now don't set the readahead size in fsverity_verify_page(),
since currently it's only used to verify holes on ext4 and f2fs, and it
would need parameters added to know how much to read ahead.

This patch significantly improves fs-verity sequential read performance.
Some quick benchmarks with 'cat'-ing a 250MB file after dropping caches:

    On an ARM64 phone (using sha256-ce):
        Before: 217 MB/s
        After: 263 MB/s
        (compare to sha256sum of non-verity file: 357 MB/s)

    In an x86_64 VM (using sha256-avx2):
        Before: 173 MB/s
        After: 215 MB/s
        (compare to sha256sum of non-verity file: 223 MB/s)

Link: https://lore.kernel.org/r/20200106205533.137005-1-ebiggers@kernel.org
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-01-14 13:27:32 -08:00
Eric Biggers c22415d333 fs-verity: implement readahead for FS_IOC_ENABLE_VERITY
When it builds the first level of the Merkle tree, FS_IOC_ENABLE_VERITY
sequentially reads each page of the file using read_mapping_page().
This works fine if the file's data is already in pagecache, which should
normally be the case, since this ioctl is normally used immediately
after writing out the file.

But in any other case this implementation performs very poorly, since
only one page is read at a time.

Fix this by implementing readahead using the functions from
mm/readahead.c.

This improves performance in the uncached case by about 20x, as seen in
the following benchmarks done on a 250MB file (on x86_64 with SHA-NI):

    FS_IOC_ENABLE_VERITY uncached (before) 3.299s
    FS_IOC_ENABLE_VERITY uncached (after)  0.160s
    FS_IOC_ENABLE_VERITY cached            0.147s
    sha256sum uncached                     0.191s
    sha256sum cached                       0.145s

Note: we could instead switch to kernel_read().  But that would mean
we'd no longer be hashing the data directly from the pagecache, which is
a nice optimization of its own.  And using kernel_read() would require
allocating another temporary buffer, hashing the data and tree pages
separately, and explicitly zero-padding the last page -- so it wouldn't
really be any simpler than direct pagecache access, at least for now.

Link: https://lore.kernel.org/r/20200106205410.136707-1-ebiggers@kernel.org
Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2020-01-14 13:27:32 -08:00
Pankaj Bharadiya c593642c8b treewide: Use sizeof_field() macro
Replace all the occurrences of FIELD_SIZEOF() with sizeof_field() except
at places where these are defined. Later patches will remove the unused
definition of FIELD_SIZEOF().

This patch is generated using following script:

EXCLUDE_FILES="include/linux/stddef.h|include/linux/kernel.h"

git grep -l -e "\bFIELD_SIZEOF\b" | while read file;
do

	if [[ "$file" =~ $EXCLUDE_FILES ]]; then
		continue
	fi
	sed -i  -e 's/\bFIELD_SIZEOF\b/sizeof_field/g' $file;
done

Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Link: https://lore.kernel.org/r/20190924105839.110713-3-pankaj.laxminarayan.bharadiya@intel.com
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Acked-by: David Miller <davem@davemloft.net> # for net
2019-12-09 10:36:44 -08:00
Eric Biggers 432434c9f8 fs-verity: support builtin file signatures
To meet some users' needs, add optional support for having fs-verity
handle a portion of the authentication policy in the kernel.  An
".fs-verity" keyring is created to which X.509 certificates can be
added; then a sysctl 'fs.verity.require_signatures' can be set to cause
the kernel to enforce that all fs-verity files contain a signature of
their file measurement by a key in this keyring.

See the "Built-in signature verification" section of
Documentation/filesystems/fsverity.rst for the full documentation.

Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-08-12 19:33:50 -07:00
Eric Biggers add890c9f9 fs-verity: add SHA-512 support
Add SHA-512 support to fs-verity.  This is primarily a demonstration of
the trivial changes needed to support a new hash algorithm in fs-verity;
most users will still use SHA-256, due to the smaller space required to
store the hashes.  But some users may prefer SHA-512.

Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-08-12 19:33:50 -07:00
Eric Biggers 4dd893d832 fs-verity: implement FS_IOC_MEASURE_VERITY ioctl
Add a function for filesystems to call to implement the
FS_IOC_MEASURE_VERITY ioctl.  This ioctl retrieves the file measurement
that fs-verity calculated for the given file and is enforcing for reads;
i.e., reads that don't match this hash will fail.  This ioctl can be
used for authentication or logging of file measurements in userspace.

See the "FS_IOC_MEASURE_VERITY" section of
Documentation/filesystems/fsverity.rst for the documentation.

Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-08-12 19:33:50 -07:00
Eric Biggers 3fda4c617e fs-verity: implement FS_IOC_ENABLE_VERITY ioctl
Add a function for filesystems to call to implement the
FS_IOC_ENABLE_VERITY ioctl.  This ioctl enables fs-verity on a file.

See the "FS_IOC_ENABLE_VERITY" section of
Documentation/filesystems/fsverity.rst for the documentation.

Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-08-12 19:33:50 -07:00
Eric Biggers 8a1d0f9cac fs-verity: add data verification hooks for ->readpages()
Add functions that verify data pages that have been read from a
fs-verity file, against that file's Merkle tree.  These will be called
from filesystems' ->readpage() and ->readpages() methods.

Since data verification can block, a workqueue is provided for these
methods to enqueue verification work from their bio completion callback.

See the "Verifying data" section of
Documentation/filesystems/fsverity.rst for more information.

Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-28 16:59:16 -07:00
Eric Biggers c1d9b584e2 fs-verity: add the hook for file ->setattr()
Add a function fsverity_prepare_setattr() which filesystems that support
fs-verity must call to deny truncates of verity files.

Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-28 16:59:16 -07:00
Eric Biggers fd2d1acfca fs-verity: add the hook for file ->open()
Add the fsverity_file_open() function, which prepares an fs-verity file
to be read from.  If not already done, it loads the fs-verity descriptor
from the filesystem and sets up an fsverity_info structure for the inode
which describes the Merkle tree and contains the file measurement.  It
also denies all attempts to open verity files for writing.

This commit also begins the include/linux/fsverity.h header, which
declares the interface between fs/verity/ and filesystems.

Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-28 16:59:16 -07:00
Eric Biggers 671e67b47e fs-verity: add Kconfig and the helper functions for hashing
Add the beginnings of the fs/verity/ support layer, including the
Kconfig option and various helper functions for hashing.  To start, only
SHA-256 is supported, but other hash algorithms can easily be added.

Reviewed-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jaegeuk Kim <jaegeuk@kernel.org>
Signed-off-by: Eric Biggers <ebiggers@google.com>
2019-07-28 16:59:16 -07:00