This patch adds filename encryption infra.
Most of codes are copied from ext4 part, but changed to adjust f2fs
directory structure.
Signed-off-by: Uday Savagaonkar <savagaon@google.com>
Signed-off-by: Ildar Muslukhov <ildarm@google.com>
Signed-off-by: Michael Halcrow <mhalcrow@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch copies from encrypt_key.c in ext4, and modifies for f2fs.
Use GFP_NOFS, since _f2fs_get_encryption_info is called under f2fs_lock_op.
Signed-off-by: Michael Halcrow <mhalcrow@google.com>
Signed-off-by: Ildar Muslukhov <muslukhovi@gmail.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Most of parts were copied from ext4, except:
- add f2fs_restore_and_release_control_page which returns control page and
restore control page
- remove ext4_encrypted_zeroout()
- remove sbi->s_file_encryption_mode & sbi->s_dir_encryption_mode
- add f2fs_end_io_crypto_work for mpage_end_io
Signed-off-by: Michael Halcrow <mhalcrow@google.com>
Signed-off-by: Ildar Muslukhov <ildarm@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds encryption policy and password salt support through ioctl
implementation.
It adds three ioctls:
F2FS_IOC_SET_ENCRYPTION_POLICY,
F2FS_IOC_GET_ENCRYPTION_POLICY,
F2FS_IOC_GET_ENCRYPTION_PWSALT, which use xattr operations.
Note that, these definition and codes are taken from ext4 crypto support.
For f2fs, xattr operations and on-disk flags for superblock and inode were
changed.
Signed-off-by: Michael Halcrow <mhalcrow@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Ildar Muslukhov <muslukhovi@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds f2fs encryption config.
This patch integrates:
"ext4 crypto: require CONFIG_CRYPTO_CTR if ext4 encryption is enabled
On arm64 this is apparently needed for CTS mode to function correctly.
Otherwise attempts to use CTS return ENOENT."
Signed-off-by: Michael Halcrow <mhalcrow@google.com>
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch fixes overflow when do cat /sys/kernel/debug/f2fs/status.
If a section is relatively large, dist value can be overflowed.
Reported-by: Yossi Goldfill <ygoldfill@radianmemory.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Now, FALLOC_FL_ZERO_RANGE flag in ->fallocate is supported in ext4/xfs.
In commit, the semantics of this flag is descripted as following:"
1) Make sure that both offset and len are block size aligned.
2) Update the i_size of inode by len bytes.
3) Compute the file's logical block number against offset. If the computed
block number is not the starting block of the extent, split the extent
such that the block number is the starting block of the extent.
4) Shift all the extents which are lying between
[offset, last allocated extent] towards right by len bytes. This step
will make a hole of len bytes at offset."
This patch implements fallocate's FALLOC_FL_ZERO_RANGE for f2fs.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Now, FALLOC_FL_COLLAPSE_RANGE flag in ->fallocate is supported in ext4/xfs.
In commit, the semantics of this flag is descripted as following:"
1) It collapses the range lying between offset and length by removing any
data blocks which are present in this range and than updates all the
logical offsets of extents beyond "offset + len" to nullify the hole
created by removing blocks. In short, it does not leave a hole.
2) It should be used exclusively. No other fallocate flag in combination.
3) Offset and length supplied to fallocate should be fs block size aligned
in case of xfs and ext4.
4) Collaspe range does not work beyond i_size."
This patch implements fallocate's FALLOC_FL_COLLAPSE_RANGE for f2fs.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Introduce a generic function replace_block base on recover_data_page,
and export it. So with it we can operate file's meta data which is in
CP/SSA area when we invoke fallocate with FALLOC_FL_COLLAPSE_RANGE
flag.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In set_node_addr, we try to lookup cached nat entry of inode and then
set flag in it.
But previously in this function, we have already grabbed nat entry with
current node id, if the node id is the same as the one of inode, we
do not need to lookup it in cache again.
So this patch adds condition judgment for reducing unneeded lookup.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Remove f2fs_make_empty() declaration, since the main body of this function
is move into do_make_empty_dir() and the function is obsolete now.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch determines to issue discard commands by comparing given minlen and
the length of produced final candidates.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds a bitmap for discard issues from f2fs_trim_fs.
There-in rule is to issue discard commands only for invalidated blocks
after mount.
Once mount is done, f2fs_trim_fs trims out whole invalid area.
After ehn, it will not issue and discrads redundantly.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch removes spin_lock, since this is covered by f2fs_lock_op already.
And, we should avoid to use page operations inside spin_lock.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch splits find_data_page as follows.
1. f2fs_gc
- use get_read_data_page() with read only
2. find_in_level
- use find_data_page without locked page
3. truncate_partial_page
- In the case cache_only mode, just drop cached page.
- Ohterwise, use get_lock_data_page() and guarantee to truncate
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
There are two threads:
f2fs_delete_entry() get_new_data_page()
f2fs_reserve_block()
dn.blkaddr = XXX
lock_page(dentry_block)
truncate_hole()
dn.blkaddr = NULL
unlock_page(dentry_block)
lock_page(dentry_block)
fill the block from XXX address
add new dentries
unlock_page(dentry_block)
Later, f2fs_write_data_page() will truncate the dentry_block, since
its block address is NULL.
The reason for this was due to the wrong lock order.
In this case, we should do f2fs_reserve_block() after locking its dentry block.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds f2fs_sb_info and page pointers in f2fs_io_info structure.
With this change, we can reduce a lot of parameters for IO functions.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch implements f2fs_mpage_readpages for further optimization on
encryption support.
The basic code was taken from fs/mpage.c, and changed to be simple by adjusting
that block_size is equal to page_size in f2fs.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
a) instead of storing the symlink body (via nd_set_link()) and returning
an opaque pointer later passed to ->put_link(), ->follow_link() _stores_
that opaque pointer (into void * passed by address by caller) and returns
the symlink body. Returning ERR_PTR() on error, NULL on jump (procfs magic
symlinks) and pointer to symlink body for normal symlinks. Stored pointer
is ignored in all cases except the last one.
Storing NULL for opaque pointer (or not storing it at all) means no call
of ->put_link().
b) the body used to be passed to ->put_link() implicitly (via nameidata).
Now only the opaque pointer is. In the cases when we used the symlink body
to free stuff, ->follow_link() now should store it as opaque pointer in addition
to returning it.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
has_fsynced_inode() has no other caller out of node.c, make it static.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In the punch_hole(), if offset bigger than inode size, it returns SUCCESS.
Then f2fs_fallocate() will update time and dirty mark.
In that case, inode has not been modified actually.
So I have added offset check routine that prevent to call the punch_hole().
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Export is_valid_blkaddr() and use it to replace some codes for readability.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Our f2fs_acl_create is copied from posix_acl_create in ./fs/posix_acl.c and
modified to avoid deadlock bug when inline_dentry feature is enabled.
Dan Carpenter rewrites posix_acl_create in commit 2799563b281f
("fs/posix_acl.c: make posix_acl_create() safer and cleaner") to make this
function more safer, so that we can avoid potential bug in its caller,
especially for ocfs2.
Let's back port the patch to f2fs.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The page_follow_link_light returns NULL and its error pointer was remained
in nd->path.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This reports performance regression by Yuanhan Liu.
The basic idea was to reduce one-point mutex, but it turns out this causes
another contention like context swithes.
https://lkml.org/lkml/2015/4/21/11
Until finishing the analysis on this issue, I'd like to revert this for a while.
This reverts commit 78373b7319.
Pull fourth vfs update from Al Viro:
"d_inode() annotations from David Howells (sat in for-next since before
the beginning of merge window) + four assorted fixes"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
RCU pathwalk breakage when running into a symlink overmounting something
fix I_DIO_WAKEUP definition
direct-io: only inc/dec inode->i_dio_count for file systems
fs/9p: fix readdir()
VFS: assorted d_backing_inode() annotations
VFS: fs/inode.c helpers: d_inode() annotations
VFS: fs/cachefiles: d_backing_inode() annotations
VFS: fs library helpers: d_inode() annotations
VFS: assorted weird filesystems: d_inode() annotations
VFS: normal filesystems (and lustre): d_inode() annotations
VFS: security/: d_inode() annotations
VFS: security/: d_backing_inode() annotations
VFS: net/: d_inode() annotations
VFS: net/unix: d_backing_inode() annotations
VFS: kernel/: d_inode() annotations
VFS: audit: d_backing_inode() annotations
VFS: Fix up some ->d_inode accesses in the chelsio driver
VFS: Cachefiles should perform fs modifications on the top layer only
VFS: AF_UNIX sockets should call mknod on the top layer only
Pull f2fs updates from Jaegeuk Kim:
"New features:
- in-memory extent_cache
- fs_shutdown to test power-off-recovery
- use inline_data to store symlink path
- show f2fs as a non-misc filesystem
Major fixes:
- avoid CPU stalls on sync_dirty_dir_inodes
- fix some power-off-recovery procedure
- fix handling of broken symlink correctly
- fix missing dot and dotdot made by sudden power cuts
- handle wrong data index during roll-forward recovery
- preallocate data blocks for direct_io
... and a bunch of minor bug fixes and cleanups"
* tag 'for-f2fs-4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (71 commits)
f2fs: pass checkpoint reason on roll-forward recovery
f2fs: avoid abnormal behavior on broken symlink
f2fs: flush symlink path to avoid broken symlink after POR
f2fs: change 0 to false for bool type
f2fs: do not recover wrong data index
f2fs: do not increase link count during recovery
f2fs: assign parent's i_mode for empty dir
f2fs: add F2FS_INLINE_DOTS to recover missing dot dentries
f2fs: fix mismatching lock and unlock pages for roll-forward recovery
f2fs: fix sparse warnings
f2fs: limit b_size of mapped bh in f2fs_map_bh
f2fs: persist system.advise into on-disk inode
f2fs: avoid NULL pointer dereference in f2fs_xattr_advise_get
f2fs: preallocate fallocated blocks for direct IO
f2fs: enable inline data by default
f2fs: preserve extent info for extent cache
f2fs: initialize extent tree with on-disk extent info of inode
f2fs: introduce __{find,grab}_extent_tree
f2fs: split set_data_blkaddr from f2fs_update_extent_cache
f2fs: enable fast symlink by utilizing inline data
...
This patch adds CP_RECOVERY to remain recovery information for checkpoint.
And, it makes sure writing checkpoint in this case.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When f2fs_symlink was triggered and checkpoint was done before syncing its
link path, f2fs can get broken symlink like "xxx -> \0\0\0".
This incurs abnormal path_walk by VFS.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch tries to avoid broken symlink case after POR in best effort.
This results in performance regression.
But, if f2fs has inline_data and the target path is under 3KB-sized long,
the page would be stored in its inode_block, so that there would be no
performance regression.
Note that, if user wants to keep this file atomically, it needs to trigger
dir->fsync.
And, there is still a hole to produce broken symlink.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
in the f2fs_fill_super function, variable "retry" is bool type
i think that it should be set as false.
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
that's the bulk of filesystem drivers dealing with inodes of their own
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
The rw parameter to direct_IO is redundant with iov_iter->type, and
treated slightly differently just about everywhere it's used: some users
do rw & WRITE, and others do rw == WRITE where they should be doing a
bitwise check. Simplify this with the new iov_iter_rw() helper, which
always returns either READ or WRITE.
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Most filesystems call through to these at some point, so we'll start
here.
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
All places outside of core VFS that checked ->read and ->write for being NULL or
called the methods directly are gone now, so NULL {read,write} with non-NULL
{read,write}_iter will do the right thing in all cases.
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
During the roll-forward recovery, if we found a new data index written fsync
lastly, we need to recover new block address.
But, if that address was corrupted, we should not recover that.
Otherwise, f2fs gets kernel panic from:
In check_index_in_prev_nodes(),
sentry = get_seg_entry(sbi, segno);
--------------------------> out-of-range segno.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If there are multiple fsynced dnodes having a dent flag, roll-forward routine
sets FI_INC_LINK for their inode, and recovery_dentry increases its link count
accordingly.
That results in normal file having a link count as 2, so we can't unlink those
files.
This was added to handle several inode blocks having same inode number with
different directory paths.
But, current f2fs doesn't replay all of path changes and only recover its dentry
for the last fsynced inode block.
So, there is no reason to do this.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If f2fs was corrupted with missing dot dentries, it needs to recover them after
fsck.f2fs detection.
The underlying precedure is:
1. The fsck.f2fs remains F2FS_INLINE_DOTS flag in directory inode, if it detects
missing dot dentries.
2. When f2fs looks up the corrupted directory, it triggers f2fs_add_link with
proper inode numbers and their dot and dotdot names.
3. Once f2fs recovers the directory without errors, it removes F2FS_INLINE_DOTS
finally.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch fixes the below warning.
sparse warnings: (new ones prefixed by >>)
>> fs/f2fs/inode.c:56:23: sparse: restricted __le32 degrades to integer
>> fs/f2fs/inode.c:56:52: sparse: restricted __le32 degrades to integer
Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Map bh over max size which caller defined is not needed, limit it in
f2fs_map_bh.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch fixes to dirty inode for persisting i_advise of f2fs inode info into
on-disk inode if user sets system.advise through setxattr. Otherwise the new
value will be lost.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Normally, due to DIO_SKIP_HOLES flag is set by default, blockdev_direct_IO in
f2fs_direct_IO tries to skip DIO in holes when writing inside i_size, this
makes us falling back to buffered IO which shows lower performance.
So in commit 59b802e5a4 ("f2fs: allocate data blocks in advance for
f2fs_direct_IO"), we improve perfromance by allocating data blocks in advance
if we meet holes no matter in i_size or not, since with it we can avoid falling
back to buffered IO.
But we forget to consider for unwritten fallocated block in this commit.
This patch tries to fix it for fallocate case, this helps to improve
performance.
Test result:
Storage info: sandisk ultra 64G micro sd card.
touch /mnt/f2fs/file
truncate -s 67108864 /mnt/f2fs/file
fallocate -o 0 -l 67108864 /mnt/f2fs/file
time dd if=/dev/zero of=/mnt/f2fs/file bs=1M count=64 conv=notrunc oflag=direct
Time before applying the patch:
67108864 bytes (67 MB) copied, 36.16 s, 1.9 MB/s
real 0m36.162s
user 0m0.000s
sys 0m0.180s
Time after applying the patch:
67108864 bytes (67 MB) copied, 27.7776 s, 2.4 MB/s
real 0m27.780s
user 0m0.000s
sys 0m0.036s
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Enable inline_data feature by default since it brings us better
performance and space utilization and now has already stable.
Add another option noinline_data to disable it during mount.
Suggested-by: Jaegeuk Kim <jaegeuk@kernel.org>
Suggested-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch tries to preserve last extent info in extent tree cache into on-disk
inode, so this can help us to reuse the last extent info next time for
performance.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
With normal extent info cache, we records largest extent mapping between logical
block and physical block into extent info, and we persist extent info in on-disk
inode.
When we enable extent tree cache, if extent info of on-disk inode is exist, and
the extent is not a small fragmented mapping extent. We'd better to load the
extent info into extent tree cache when inode is loaded. By this way we can have
more chance to hit extent tree cache rather than taking more time to read dnode
page for block address.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces __{find,grab}_extent_tree for reusing by following
patches.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Split __set_data_blkaddr from f2fs_update_extent_cache for readability.
Additionally rename __set_data_blkaddr to set_data_blkaddr for exporting.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Fast symlink can utilize inline data flow to avoid using any
i_addr region, since we need to handle many cases such as
truncation, roll-forward recovery, and fsck/dump tools.
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch is to avoid some punch_hole overhead when releasing volatile data.
If volatile data was not written yet, we just can make the first page as zero.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch removes wrong f2fs_bug_on in truncate_inline_inode.
When there is no space, it can happen a corner case where i_isze is over
MAX_INLINE_SIZE while its inode is still inline_data.
The scenario is
1. write small data into file #A.
2. fill the whole partition to 100%.
3. truncate 4096 on file #A.
4. write data at 8192 offset.
--> f2fs_write_begin
-> -ENOSPC = f2fs_convert_inline_page
-> f2fs_write_failed
-> truncate_blocks
-> truncate_inline_inode
BUG_ON, since i_size is 4096.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously, f2fs_write_data_pages has a mutex, sbi->writepages, to serialize
data writes to maximize write bandwidth, while sacrificing multi-threads
performance.
Practically, however, multi-threads environment is much more important for
users. So this patch tries to remove the mutex.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch modifies to call set_buffer_new, if new blocks are allocated.
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch tries to set SBI_NEED_FSCK flag into sbi only when we fail to recover
in fill_super, so we could skip fscking image when we fail to fill super for
other reason.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In the following call stack, f2fs changes the bitmap for dirty segments and # of
dirty sentries without grabbing sit_i->sentry_lock.
This can result in mismatch on bitmap and # of dirty sentries, since if there
are some direct_io operations.
In allocate_data_block,
- __allocate_new_segments
- mutex_lock(&curseg->curseg_mutex);
- s_ops->allocate_segment
- new_curseg/change_curseg
- reset_curseg
- __set_sit_entry_type
- __mark_sit_entry_dirty
- set_bit(dirty_sentries_bitmap)
- dirty_sentries++;
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In __allocate_data_blocks, we should check current blkaddr which is located at
ofs_in_node of dnode page instead of checking first blkaddr all the time.
Otherwise we can only allocate one blkaddr in each dnode page. Fix it.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Previously if inode is with inline data, we will try to invalid partial inline
data in page #0 when we truncate size of inode in truncate_partial_data_page().
And then we set page #0 to dirty, after this we can synchronize inode page with
page #0 at ->writepage().
But sometimes we will fail to operate page #0 in truncate_partial_data_page()
due to below reason:
a) if offset is zero, we will skip setting page #0 to dirty.
b) if page #0 is not uptodate, we will fail to update it as it has no mapping
data.
So with following operations, we will meet recent data which should be
truncated.
1.write inline data to file
2.sync first data page to inode page
3.truncate file size to 0
4.truncate file size to max_inline_size
5.echo 1 > /proc/sys/vm/drop_caches
6.read file --> meet original inline data which is remained in inode page.
This patch renames truncate_inline_data() to truncate_inline_inode() for code
readability, then use truncate_inline_inode() to truncate inline data in inode
page in truncate_blocks() and truncate page #0 in truncate_partial_data_page()
for fixing.
v2:
o truncate partially #0 page in truncate_partial_data_page to avoid keeping
old data in #0 page.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Our f2fs_acl_create is copied and modified from posix_acl_create to avoid
deadlock bug when inline_dentry feature is enabled.
Now, we got reference leaks in posix_acl_create, and this has been fixed in
commit fed0b588be ("posix_acl: fix reference leaks in posix_acl_create")
by Omar Sandoval.
https://lkml.org/lkml/2015/2/9/5
Let's fix this issue in f2fs_acl_create too.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Reviewed-by: Changman Lee <cm224.lee@ssamsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When lookuping for creating, we will try to record the level of current dentry
hash table if current dentry has enough contiguous slots for storing name of new
file which will be created later, this can save our lookup time when add a link
into parent dir.
But currently in find_target_dentry, our current length of contiguous free slots
is not calculated correctly. This make us leaving some holes in dentry block
occasionally, it wastes our space of dentry block.
Let's refactor the lookup flow for max slots as following to fix this issue:
a) increase max_len if current slot is free;
b) update max_slots with max_len if max_len is larger than max_slots;
c) reset max_len to zero if current slot is not free.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
nm_i->nat_tree_lock is used to sync both the operations of nat entry
cache tree and nat set cache tree, however, it isn't held when flush
nat entries during checkpoint which lead to potential race, this patch
fix it by holding the lock when gang lookup nat set cache and delete
item from nat set cache.
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Through each macro, we can read the meaning easily.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Remove the unnecessary condition judgment, because
'max_slots' has been initialized to '0' at the beginging
of the function, as following:
if (max_slots)
*max_slots = 0;
Signed-off-by: Yuan Zhong <yuan.mark.zhong@samsung.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The function 'find_in_inline_dir()' contain 'res_page'
as an argument. So, we should initiaize 'res_page' before
this function.
Signed-off-by: Yuan Zhong <yuan.mark.zhong@samsung.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In __set_free we will check whether all segment are free in one section
when free one segment, in order to set section to free status. But the
searching region of segmap is from start segno to last segno of main
area, it's not necessary. So let's just only check all segment bitmap
of target section.
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
extent tree/node slab cache is created during f2fs insmod,
how, it isn't destroyed during f2fs rmmod, this patch fix
it by destroy extent tree/node slab cache once rmmod f2fs.
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The f2fs has been shipped on many smartphone devices during a couple of years.
So, it is worth to relocate Kconfig into main page from misc filesystems for
developers to choose it more easily.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If inode has inline_data, it should report -ENOENT when accessing out-of-bound
region.
This is used by f2fs_fiemap which treats -ENOENT with no error.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When fsync is done through checkpoint, previous f2fs missed to clear append
and update flag. This patch fixes to clear them.
This was originally catched by Changman Lee before.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch is for looking into gc performance of f2fs in detail.
Signed-off-by: Changman Lee <cm224.lee@samsung.com>
[Jaegeuk Kim: fix build errors]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Now in f2fs, we share functions and structures for batch mode and real-time mode
discard. For real-time mode discard, in shared function add_discard_addrs, we
will use uninitialized trim_minlen in struct cp_control to compare with length
of contiguous free blocks to decide whether skipping discard fragmented freespace
or not, this makes us ignore small discard sometimes. Fix it.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Reviewed-by : Changman Lee <cm224.lee@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
In a preempt-off enviroment a alot of FS activity (write/delete) I run
into a CPU stall:
| NMI watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [kworker/u2:2:59]
| Modules linked in:
| CPU: 0 PID: 59 Comm: kworker/u2:2 Tainted: G W 3.19.0-00010-g10c11c51ffed #153
| Workqueue: writeback bdi_writeback_workfn (flush-179:0)
| task: df230000 ti: df23e000 task.ti: df23e000
| PC is at __submit_merged_bio+0x6c/0x110
| LR is at f2fs_submit_merged_bio+0x74/0x80
…
| [<c00085c4>] (gic_handle_irq) from [<c0012e84>] (__irq_svc+0x44/0x5c)
| Exception stack(0xdf23fb48 to 0xdf23fb90)
| fb40: deef3484 ffff0001 ffff0001 00000027 deef3484 00000000
| fb60: deef3440 00000000 de426000 deef34ec deefc440 df23fbb4 df23fbb8 df23fb90
| fb80: c02191f0 c0218fa0 60000013 ffffffff
| [<c0012e84>] (__irq_svc) from [<c0218fa0>] (__submit_merged_bio+0x6c/0x110)
| [<c0218fa0>] (__submit_merged_bio) from [<c02191f0>] (f2fs_submit_merged_bio+0x74/0x80)
| [<c02191f0>] (f2fs_submit_merged_bio) from [<c021624c>] (sync_dirty_dir_inodes+0x70/0x78)
| [<c021624c>] (sync_dirty_dir_inodes) from [<c0216358>] (write_checkpoint+0x104/0xc10)
| [<c0216358>] (write_checkpoint) from [<c021231c>] (f2fs_sync_fs+0x80/0xbc)
| [<c021231c>] (f2fs_sync_fs) from [<c0221eb8>] (f2fs_balance_fs_bg+0x4c/0x68)
| [<c0221eb8>] (f2fs_balance_fs_bg) from [<c021e9b8>] (f2fs_write_node_pages+0x40/0x110)
| [<c021e9b8>] (f2fs_write_node_pages) from [<c00de620>] (do_writepages+0x34/0x48)
| [<c00de620>] (do_writepages) from [<c0145714>] (__writeback_single_inode+0x50/0x228)
| [<c0145714>] (__writeback_single_inode) from [<c0146184>] (writeback_sb_inodes+0x1a8/0x378)
| [<c0146184>] (writeback_sb_inodes) from [<c01463e4>] (__writeback_inodes_wb+0x90/0xc8)
| [<c01463e4>] (__writeback_inodes_wb) from [<c01465f8>] (wb_writeback+0x1dc/0x28c)
| [<c01465f8>] (wb_writeback) from [<c0146dd8>] (bdi_writeback_workfn+0x2ac/0x460)
| [<c0146dd8>] (bdi_writeback_workfn) from [<c003c3fc>] (process_one_work+0x11c/0x3a4)
| [<c003c3fc>] (process_one_work) from [<c003c844>] (worker_thread+0x17c/0x490)
| [<c003c844>] (worker_thread) from [<c0041398>] (kthread+0xec/0x100)
| [<c0041398>] (kthread) from [<c000ed10>] (ret_from_fork+0x14/0x24)
As it turns out, the code loops in sync_dirty_dir_inodes() and waits for
others to make progress but since it never leaves the CPU there is no
progress made. At the time of this stall, there is also a rm process
blocked:
| rm R running 0 1989 1774 0x00000000
| [<c047c55c>] (__schedule) from [<c00486dc>] (__cond_resched+0x30/0x4c)
| [<c00486dc>] (__cond_resched) from [<c047c8c8>] (_cond_resched+0x4c/0x54)
| [<c047c8c8>] (_cond_resched) from [<c00e1aec>] (truncate_inode_pages_range+0x1f0/0x5e8)
| [<c00e1aec>] (truncate_inode_pages_range) from [<c00e1fd8>] (truncate_inode_pages+0x28/0x30)
| [<c00e1fd8>] (truncate_inode_pages) from [<c00e2148>] (truncate_inode_pages_final+0x60/0x64)
| [<c00e2148>] (truncate_inode_pages_final) from [<c020c92c>] (f2fs_evict_inode+0x4c/0x268)
| [<c020c92c>] (f2fs_evict_inode) from [<c0137214>] (evict+0x94/0x140)
| [<c0137214>] (evict) from [<c01377e8>] (iput+0xc8/0x134)
| [<c01377e8>] (iput) from [<c01333e4>] (d_delete+0x154/0x180)
| [<c01333e4>] (d_delete) from [<c0129870>] (vfs_rmdir+0x114/0x12c)
| [<c0129870>] (vfs_rmdir) from [<c012d644>] (do_rmdir+0x158/0x168)
| [<c012d644>] (do_rmdir) from [<c012dd90>] (SyS_unlinkat+0x30/0x3c)
| [<c012dd90>] (SyS_unlinkat) from [<c000ec40>] (ret_fast_syscall+0x0/0x4c)
As explained by Jaegeuk Kim:
|This inode is the directory (c.f., do_rmdir) causing a infinite loop on
|sync_dirty_dir_inodes.
|The sync_dirty_dir_inodes tries to flush dirty dentry pages, but if the
|inode is under eviction, it submits bios and do it again until eviction
|is finished.
This patch adds a cond_resched() (as suggested by Jaegeuk) after a BIO
is submitted so other thread can make progress.
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
[Jaegeuk Kim: change fs/f2fs to f2fs in subject as naming convention]
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
cp_payload is introduced for sit bitmap to support large volume, and it is
just after the block of f2fs_checkpoint + nat bitmap, so the first segment
should include F2FS_CP_PACKS + NR_CURSEG_TYPE + cp_payload + orphan blocks.
However, current max orphan inodes calculation don't consider cp_payload,
this patch fix it by reducing the number of cp_payload from total blocks of
the first segment when calculate max orphan inodes.
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Don't need to collect dirty sit entries and flush sit journal to sit
entries when there's no dirty sit entries. This patch check dirty_sentries
earlier just like flush_nat_entries.
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
block operations is used to flush all dirty node and dentry blocks in
the page cache and suspend ordinary writing activities, however, there
are some facts such like cp error or mount read-only etc which lead to
block operations can't be invoked. Current trace point print block_ops
start premature even if block_ops doesn't have opportunity to execute.
This patch fix it by move block_ops trace point just before block_ops.
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If a page is cached but its block was deallocated, we don't need to make
the page dirty again by gc and truncate_partial_data_page.
In that case, it needs to check its block allocation all the time instead
of giving up-to-date page.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If page's on-disk block was deallocated, let's remove up-to-date flag to avoid
further access with wrong contents.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
cp_pack_start_sum is calculated in do_checkpoint and is equal to
cpu_to_le32(1 + cp_payload_blks + orphan_blocks). The number of
orphan inode blocks is take advantage of by recover_orphan_inodes
to readahead meta pages and recovery inodes. However, current codes
forget to reduce the number of cp payload blocks when calculate
the number of orphan inode blocks. This patch fix it.
Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com>
Reviewed-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch introduces a generic ioctl for fs shutdown, which was used by xfs.
If this shutdown is triggered, filesystem stops any further IOs according to the
following options.
1. FS_GOING_DOWN_FULLSYNC
: this will flush all the data and dentry blocks, and do checkpoint before
shutdown.
2. FS_GOING_DOWN_METASYNC
: this will do checkpoint before shutdown.
3. FS_GOING_DOWN_NOSYNC
: this will trigger shutdown as is.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
struct kiocb now is a generic I/O container, so move it to fs.h.
Also do a #include diet for aio.h while we're at it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Jaegeuk Kim
Chao Yu
Al Viro
Taehee Yoo
Linus Torvalds
David Howells
Omar Sandoval
Wanpeng Li
Changman Lee
Yuan Zhong
Sebastian Andrzej Siewior
Christoph Hellwig