Fix the wrong button vol+ detection issue with some brand headsets
by fine tuning the threshold of button vol+ and SAR ADC button accuracy.
Signed-off-by: Derek Fang <derek.fang@realtek.com>
Link: https://lore.kernel.org/r/20210825040346.28346-1-derek.fang@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Marking the two jack gpio as static fixes the following Sparse errors:
sound/soc/intel/boards/bytcr_rt5640.c:468:26: error: symbol 'rt5640_jack_gpio' was not declared. Should it be static?
sound/soc/intel/boards/bytcr_rt5640.c:475:26: error: symbol 'rt5640_jack2_gpio' was not declared. Should it be static?
Fixes: 9ba0085668 ("ASoC: Intel: bytcr_rt5640: Add support for HP Elite Pad 1000G2 jack-detect")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20210825122519.3364-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Clean up the following includecheck warning:
./sound/soc/sof/intel/pci-tng.c: shim.h is included more than once.
No functional change.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Changcheng Deng <deng.changcheng@zte.com.cn>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210824030015.57267-1-deng.changcheng@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds support for mt8195 board with mt6359, rt1019 and rt5682.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20210819084144.18483-9-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds mt8195 adda dai driver.
audio_h clock is used by ADSP bus and ADDA module.
When ADDA requires audio_h clock, it is switched to APLL1, otherwise
it is switched to Xtal_26m so that APLL1 can be turned off when audio
feature is not used.
ADSP bus only requires that the clock is on, so dynamic reparenting
is used for the purpose of lowering power consumption.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20210819084144.18483-5-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds mt8195 tdm/i2s dai driver.
MCLK clock tree is as follows.
PLL -> MUX -> DIVIDER -> MCLK
For PLL source of MCLK, driver only supports APLL1 and APLL2 now.
APLL3 and APLL4 are used to track external clock source, so they are
only used when slave input is connected.
For example,
case 1: (HDMI RX connected)
DL memif (a1sys) -> etdm out2 (clk from apll1/apll2) -> codec
case 2: (HDMI RX disconnected)
HDMI RX -> a3sys -> UL memif (a3sys) -> DL memif (a3sys) -> .... ->
etdm out2 (clk from apll3) -> codec
We keep all modules in the pipeline working on the same clock domain.
MCLK is expected to output the clock generated from the same clock
source as the pipeline, so dynamic reparenting is required for MCLK
configuration.
As a result, clk_set_parent() is used to select PLL source,
and clk_set_rate() is used to configure divider to get MCLK output rate.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20210819084144.18483-4-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch adds mt8195 audio cg control.
Audio clock gates are registered to CCF for reference count and
clock parent management.
Signed-off-by: Trevor Wu <trevor.wu@mediatek.com>
Link: https://lore.kernel.org/r/20210819084144.18483-3-trevor.wu@mediatek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch reverts commit acbf58e530 ("ASoC: wm_adsp: Let
soc_cleanup_component_debugfs remove debugfs"), and adds an
alternate solution to the issue. That patch removes the call to
debugfs_remove_recursive, which cleans up the DSPs debugfs. The
intention was to avoid an unbinding issue on an out of tree
driver/platform.
The issue with the patch is it means the driver no longer cleans up
its own debugfs, instead relying on ASoC to remove recurive on the
parent debugfs node. This is conceptually rather unclean, but also it
would prevent DSPs being added/removed independently of ASoC and soon
we are going to be upstreaming some non-audio parts with these DSPs,
which will require this.
Finally, it seems the issue on the platform is a result of the
wm_adsp2_cleanup_debugfs getting called twice. This is very likely a
problem on the platform side and will be resolved there. But in the mean
time make the code a little more robust to such issues, and again
conceptually a bit nicer, but clearing the debugfs_root variable in the
DSP structure when the debugfs is removed.
Fixes: acbf58e530 ("ASoC: wm_adsp: Let soc_cleanup_component_debugfs remove debugfs"
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210824101552.1119-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
- Core has updates to support SoundWire mockup device (includes tag from
asoc), improved error handling and slave status.
- Drivers has update on Intel driver for new quriks and better handling of
errors and suspend routines
-----BEGIN PGP SIGNATURE-----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=TCAF
-----END PGP SIGNATURE-----
Merge tag 'soundwire-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next
Vinod writes:
soundwire updates for 5.15-rc1
- Core has updates to support SoundWire mockup device (includes tag from
asoc), improved error handling and slave status.
- Drivers has update on Intel driver for new quriks and better handling of
errors and suspend routines
* tag 'soundwire-5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: cadence: do not extend reset delay
soundwire: intel: conditionally exit clock stop mode on system suspend
soundwire: intel: skip suspend/resume/wake when link was not started
soundwire: intel: fix potential race condition during power down
soundwire: cadence: override PDI configurations to create loopback
soundwire: cadence: add debugfs interface for PDI loopbacks
soundwire: stream: don't program mockup device ports
soundwire: bus: squelch error returned by mockup devices
soundwire: add flag to ignore all command/control for mockup devices
soundwire: stream: don't abort bank switch on Command_Ignored/-ENODATA
soundwire: cadence: add paranoid check on self-clearing bits
soundwire: dmi-quirks: add quirk for Intel 'Bishop County' NUC M15
soundwire: bus: update Slave status in sdw_clear_slave_status
soundwire: cadence: Remove ret variable from sdw_cdns_irq()
soundwire: bus: filter out more -EDATA errors on clock stop
soundwire: dmi-quirks: add ull suffix for SoundWire _ADR values
ASoC: Intel: boards: sof_sdw: add SoundWire mockup codecs for tests
ASoC: soc-acpi: tgl: add table for SoundWire mockup devices
ASoC: soc-acpi: cnl: add table for SoundWire mockup devices
ASoC: codecs: add SoundWire mockup device support
The recent quirk for WALKMAN (commit 7af5a14371c1: "ALSA: usb-audio:
Fix regression on Sony WALKMAN NW-A45 DAC") may be required for other
devices and is worth to be put into the common quirk flags.
This patch adds a new quirk flag bit QUIRK_FLAG_SET_IFACE_FIRST and a
quirk table entry for the device.
Link: https://lore.kernel.org/r/20210824055720.9240-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This patch extends support for the HP Spectre x360 14
amp enable quirk to support a model of the device with
an additional subdevice ID.
Signed-off-by: Johnathon Clark <john.clark@cantab.net>
Link: https://lore.kernel.org/r/20210823162110.8870-1-john.clark@cantab.net
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
We've got a regression report for USB-audio with Sony WALKMAN NW-A45
DAC device where no sound is audible on recent kernel. The bisection
resulted in the code change wrt endpoint management, and the further
debug session revealed that it was caused by the order of the USB
audio interface. In the earlier code, we always set up the USB
interface at first before other setups, but it was changed to be done
at the last for UAC2/3, which is more standard way, while keeping the
old way for UAC1. OTOH, this device seems requiring the setup of the
interface at first just like UAC1.
This patch works around the regression by applying the interface setup
specifically for the WALKMAN at the beginning of the endpoint setup
procedure. This change is written straightforwardly to be easily
backported in old kernels. A further cleanup to move the workaround
into a generic quirk section will follow in a later patch.
Fixes: bf6313a0ff ("ALSA: usb-audio: Refactor endpoint management")
Cc: <stable@vger.kernel.org>
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214105
Link: https://lore.kernel.org/r/20210824054700.8236-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Existing skylake-driver supports very basic scenarios with limited range
of modules and their control. Attached changes first fix code as several
advanced configurations are 'mentioned' throughout the files but are not
actually functional. Follow up are changes adding missing support for
said configurations.
Cezary Rojewski (5):
ASoC: Intel: kbl_da7219_max98927: Fix format selection for max98373
ASoC: Intel: Skylake: Leave data as is when invoking TLV IPCs
ASoC: Intel: Skylake: Fix module resource and format selection
ASoC: Intel: Skylake: Fix module configuration for KPB and MIXER
ASoC: Intel: Skylake: Select first entry for singular pipe config
arrays
Gustaw Lewandowski (2):
ASoC: Intel: Skylake: Fix passing loadable flag for module
ASoC: Intel: Skylake: Simplify m_state for loadable modules
Kareem Shaik (1):
ASoC: Intel: Skylake: Support multiple format configs
Pawel Harlozinski (1):
ASoC: Intel: Skylake: Properly configure modules with generic
extension
Piotr Maziarz (1):
ASoC: Intel: Skylake: Select proper format for NHLT blob
Szymon Mielczarek (1):
ASoC: Intel: Skylake: Support modules with generic extension
include/uapi/sound/snd_sst_tokens.h | 6 +-
sound/soc/intel/boards/kbl_da7219_max98927.c | 55 +------
sound/soc/intel/skylake/skl-messages.c | 155 ++++++++++++-------
sound/soc/intel/skylake/skl-pcm.c | 25 ++-
sound/soc/intel/skylake/skl-topology.c | 155 +++++++++++--------
sound/soc/intel/skylake/skl-topology.h | 26 +++-
6 files changed, 231 insertions(+), 191 deletions(-)
--
2.25.1
bclk_ms is possible unused by using the given config (see [1]).
sound/soc/codecs/rt1015.c:724:2: warning: Value stored to 'bclk_ms' is
never read [clang-analyzer-deadcode.DeadStores]
bclk_ms = frame_size > 32;
^ ~~~~~~~~~~~~~~~
In addition, bclk_ms is meaningless and confusing after applying commit
a5db2ca513 ("ASoC: rt1015: remove unneeded variables in rt1015_priv").
The "> 32" in the expression looks like a typo but it was not.
Let's remove the confusing variable bclk_ms.
[1]: https://lkml.org/lkml/2021/8/23/305
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20210823153323.1297723-1-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The byt_rt5640_hp_elitepad_1000g2_jack?_check functions are only
used inside bytcr_rt5640.c, mark them as static.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20210823110432.64860-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When pipe does not expose multiple configuration options, always select
the first entry without searching for matching one.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihalf.com>
Link: https://lore.kernel.org/r/20210818075742.1515155-12-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Make use of struct skl_base_cfg_ext and its format setter to configure
modules which are described with said structure.
Signed-off-by: Gustaw Lewandowski <gustaw.lewandowski@linux.intel.com>
Signed-off-by: Pawel Harlozinski <pawel.harlozinski@linux.intel.com>
Signed-off-by: Szymon Mielczarek <szymonx.mielczarek@intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihalf.com>
Link: https://lore.kernel.org/r/20210818075742.1515155-11-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some DSP modules require, besides the module base configuration, a
generic extension containing audio format for all module's pins that are
in use.
Signed-off-by: Gustaw Lewandowski <gustaw.lewandowski@linux.intel.com>
Signed-off-by: Szymon Mielczarek <szymonx.mielczarek@intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihalf.com>
Link: https://lore.kernel.org/r/20210818075742.1515155-10-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A module can have two kinds of set params, as per topology requirements.
For example, one pre-init and one post-init. But currently, there is
support for just one type, as the format_config.
This patch extends the format_configs to 4, so as to be able to support
pre-init, post-init and post-bind type of set params, for the same
module, simultaneously.
Signed-off-by: Kareem Shaik <kareem.m.shaik@intel.com>
Signed-off-by: Gustaw Lewandowski <gustaw.lewandowski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihalf.com>
Link: https://lore.kernel.org/r/20210818075742.1515155-9-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
States SKL_MODULE_LOADED and SKL_MODULE_UNLOADED are redundant with
'loadable' flag in struct skl_module. Additionally
skl_tplg_mixer_dapm_post_pmd_event() sets m_state always to
SKL_MODULE_UNINIT so next unload function isn't called for such modules.
Signed-off-by: Gustaw Lewandowski <gustaw.lewandowski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihalf.com>
Link: https://lore.kernel.org/r/20210818075742.1515155-8-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
skl_get_module_info() tries to set mconfig->module->loadable before
mconfig->module has been assigned thus flag was always set to false
and driver did not try to load module binaries.
Signed-off-by: Gustaw Lewandowski <gustaw.lewandowski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihalf.com>
Link: https://lore.kernel.org/r/20210818075742.1515155-7-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
KeyPhrasebuffer, Mixin and Mixout modules configuration is described by
firmware's basic module configuration structure. There are no extended
parameters required. Update functions taking part in building
INIT_INSTANCE IPC payload to reflect that.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihalf.com>
Link: https://lore.kernel.org/r/20210818075742.1515155-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Module configuration may differ between its instances depending on
resources required and input and output audio format. Available
parameters to select from are stored in module resource and interface
(format) lists. These come from topology, together with description of
each of pipe's modules.
Ignoring index value provided by topology and relying always on 0th
entry leads to unexpected module behavior due to under/overbudged
resources assigned or impropper format selection. Fix by taking entry at
index specified by topology.
Fixes: f6fa56e225 ("ASoC: Intel: Skylake: Parse and update module config structure")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihalf.com>
Link: https://lore.kernel.org/r/20210818075742.1515155-5-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use actual pipeline format, not PCM format for blob selection. Otherwise
selected blobs are not correct in pipelines with format conversion
e.g.: SRC module.
Signed-off-by: Piotr Maziarz <piotrx.maziarz@linux.intel.com>
Signed-off-by: Lewandowski, Gustaw <gustaw.lewandowski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihalf.com>
Link: https://lore.kernel.org/r/20210818075742.1515155-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Advancing pointer initially fixed issue for some users but caused
regression for others. Leave data as it to make it easier for end users
to adjust their topology files if needed.
Fixes: a8cd7066f0 ("ASoC: Intel: Skylake: Strip T and L from TLV IPCs")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihalf.com>
Link: https://lore.kernel.org/r/20210818075742.1515155-3-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Contrary to what is said in board's file, topology targeting
kbl_da7219_max98373 expects format 16b, not 24/32b. Partially revert
changes added in 'ASoC: Intel: Boards: Add Maxim98373 support' to bring
old behavior back, aligning with topology expectations.
Fixes: 716d53cc78 ("ASoC: Intel: Boards: Add Maxim98373 support")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihalf.com>
Link: https://lore.kernel.org/r/20210818075742.1515155-2-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We worked around the breakage of PCM buffer setup by the commit
65ca89c2b1 ("ASoC: intel: atom: Fix breakage for PCM buffer address
setup"), but this isn't necessary since the CONTINUOUS buffer type
also sets runtime->dma_addr since commit f84ba106a0 ("ALSA:
memalloc: Store snd_dma_buffer.addr for continuous pages, too").
Let's revert the change again.
Link: https://lore.kernel.org/r/20210822072127.9786-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
There are tons of quirks for HD-audio and many of them are without
model string, hence it's not trivial to apply the same quirk for a new
device. This patch makes it easier: namely, the model string accepts
a form as "XXXX:YYYY" (a pair of hex numbers of the subsystem-vendor
and subsystem-device IDs), to specify the alias of PCI (or codec)
SSID. e.g. passing model=1234:abcd would apply the quirk that matches
with the given SSID 1234:abcd instead of the actual SSID.
Link: https://lore.kernel.org/r/20210823073722.14873-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This contains a slight code refactoring of snd_hda_pick_fixup():
- Unify the ID setup
- Unify the debug print message
- Use snd_pci_quirk_lookup_id() for the codec SSID matching
Mostly for simplifying the code flow but also it makes easier to add
the codec alias handling in the upcoming patch.
Link: https://lore.kernel.org/r/20210823073722.14873-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Mark of the Unicorn (MOTU) shipped 896HD 2003 as one of models in second
generation of its FireWire series, and already discontinued it. The model
consists of below ICs:
* Texas Instruments TSB41AB2
* Phillips Semiconductors PDI1394L40
* Altera cyclone EP1C3
* Texas Instruments TMS320VC5402
It supports sampling transmission frequency up to 192.0 kHz. The packet
format differs depending on both of sampling transfer frequency and enabling
ADAT channels. The model doesn't support MIDI message transmission.
This commit adds support for it.
$ python3 crpp < /sys/bus/firewire/devices/fw1/config_rom
ROM header and bus information block
-----------------------------------------------------------------
400 04101b66 bus_info_length 4, crc_length 16, crc 7014
404 31333934 bus_name "1394"
408 20001000 irmc 0, cmc 0, isc 1, bmc 0, cyc_clk_acc 0, max_rec 1 (4)
40c 0001f200 company_id 0001f2 |
410 0001dbce device_id 000001dbce | EUI-64 0001f2000001dbce
root directory
-----------------------------------------------------------------
414 0004c65c directory_length 4, crc 50780
418 030001f2 vendor
41c 0c0083c0 node capabilities per IEEE 1394
420 8d000006 --> eui-64 leaf at 438
424 d1000001 --> unit directory at 428
unit directory at 428
-----------------------------------------------------------------
428 0003dcc1 directory_length 3, crc 56513
42c 120001f2 specifier id
430 13000005 version
434 17102800 model
eui-64 leaf at 438
-----------------------------------------------------------------
438 000264f2 leaf_length 2, crc 25842
43c 0001f200 company_id 0001f2 |
440 0001dbce device_id 000001dbce | EUI-64 0001f2000001dbce
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210823085741.33864-1-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ASUS ROG Strix G17 has the very same PCI and codec SSID (1043:103f) as
ASUS TX300, and unfortunately, the existing quirk for TX300 is broken
on ASUS ROG. Actually the device works without the quirk, so we'll
need to clear the quirk before applying for this device.
Since ASUS ROG has a different codec (ALC294 - while TX300 has
ALC282), this patch adds a workaround for the device, just clearing
the codec->fixup_id by checking the codec vendor_id.
It's a bit ugly to add such a workaround there, but it seems to be the
simplest way.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214101
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210820143214.3654-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is a quick follow up for 5.14: a fix for a very recently
introduced regression on ASoC Intel Atom driver, and another
trivial HD-audio quirk for HP laptops.
-----BEGIN PGP SIGNATURE-----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=QNEK
-----END PGP SIGNATURE-----
Merge tag 'sound-5.14-rc7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull more sound fixes from Takashi Iwai:
"This is a quick follow up for 5.14: a fix for a very recently
introduced regression on ASoC Intel Atom driver, and another trivial
HD-audio quirk for HP laptops"
* tag 'sound-5.14-rc7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ASoC: intel: atom: Fix breakage for PCM buffer address setup
ALSA: hda/realtek: Limit mic boost on HP ProBook 445 G8
Changes in v2:
- Rebase on asoc/for-next
- New patch: "ASoC: Intel: bytct_rt5640: Add a separate "Headset Mic 2"
DAPM pin for the mic on the 2nd jack"
- Addressed Pierre-Louis' comments about calling
acpi_dev_add_driver_gpios() twice
Original cover-letter:
The HP Elitepad 1000 G2 tablet has 2 headset jacks:
1. on the dock which uses the output of the codecs built-in HP-amp +
the standard IN2 input which is always used with the headset-jack.
2. on the tablet itself, this uses the line-out of the codec + an external
HP-amp, which gets enabled by the ALC5642 codec's GPIO1 pin; and IN1 for
the headset-mic.
The codec's GPIO1 is also its only IRQ output pin, so this means that
the codec's IRQ cannot be used on this tablet. Instead the jack-detect
is connected directly to GPIOs on the main SoC. The dock has a helper
chip which also detects if a headset-mic is present or not, so there
are 2 GPIOs for the jack-detect status of the dock. The tablet jack
uses a single GPIO which indicates if a jack is present or not.
Differentiating between between headphones vs a headset on the tablet jack
is done by using the usual mic-bias over-current-detection mechanism.
Regards,
Hans
Hans de Goede (6):
ASoC: rt5640: Move rt5640_disable_jack_detect() up in the rt5640.c
file
ASoC: rt5640: Delay requesting IRQ until the machine-drv calls
set_jack
ASoC: rt5640: Add optional hp_det_gpio parameter to
rt5640_detect_headset()
ASoC: rt5640: Add rt5640_set_ovcd_params() helper
ASoC: Intel: bytct_rt5640: Add a separate "Headset Mic 2" DAPM pin for
the mic on the 2nd jack
ASoC: Intel: bytcr_rt5640: Add support for HP Elite Pad 1000G2
jack-detect
sound/soc/codecs/rt5640.c | 136 ++++++++++++----------
sound/soc/codecs/rt5640.h | 6 +
sound/soc/intel/boards/bytcr_rt5640.c | 158 +++++++++++++++++++++++++-
3 files changed, 234 insertions(+), 66 deletions(-)
--
2.31.1
This driver is assuming that all adg->clk[i] is not NULL.
Because of this prerequisites, for_each_rsnd_clk() is possible to work
for all clk without checking NULL. In other words, all adg->clk[i]
should not NULL.
Some SoC might doesn't have clk_a/b/c/i. devm_clk_get() returns error in
such case. This driver calls rsnd_adg_null_clk_get() and use null_clk
instead of NULL in such cases.
But devm_clk_get() might returns NULL even though such clocks exist, but
it doesn't mean error (user deliberately chose to disable the feature).
NULL clk itself is not error from clk point of view, but is error from
this driver point of view because it is not assuming such case.
But current code is using IS_ERR() which doesn't care NULL.
This driver uses IS_ERR_OR_NULL() instead of IS_ERR() for clk check.
And it uses ERR_CAST() to clarify null_clk error.
One concern here is that it unconditionally uses null_clk if clk_a/b/c/i
was error. It is correct if it doesn't exist, but is not correct if it
returns error even though it exist.
It needs to check "clock-names" from DT before calling devm_clk_get() to
handling such case. But let's assume it is overkill so far.
Link: https://lore.kernel.org/r/YMCmhfQUimHCSH/n@mwanda
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v940wyf9.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Don't populate arrays on the stack but instead them static const.
Makes the object code smaller by 48 bytes.
Before:
text data bss dec hex filename
20938 916 104 21958 55c6 ./sound/soc/sh/rcar/core.o
After:
text data bss dec hex filename
20890 916 104 21910 5596 ./sound/soc/sh/rcar/core.o
gcc version 11.1.0)
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87tujkwydx.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The HP Elitepad 1000 G2 tablet has 2 headset jacks:
1. on the dock which uses the output of the codecs built-in HP-amp +
the standard IN2 input which is always used with the headset-jack.
2. on the tablet itself, this uses the line-out of the codec + an external
HP-amp, which gets enabled by the ALC5642 codec's GPIO1 pin; and IN1 for
the headset-mic.
The codec's GPIO1 is also its only IRQ output pin, so this means that
the codec's IRQ cannot be used on this tablet. Instead the jack-detect
is connected directly to GPIOs on the main SoC. The dock has a helper
chip which also detects if a headset-mic is present or not, so there
are 2 GPIOs for the jack-detect status of the dock. The tablet jack
uses a single GPIO which indicates if a jack is present or not.
Differentiating between headphones vs a headset on the tablet jack
is done by using the usual mic-bias over-current-detection mechanism.
Add support for this unique setup, this support gets enabled on this
tablet through a new BYT_RT5640_JD_HP_ELITEP_1000G2 quirk.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=213415
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210819190543.784415-7-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In order to be able to do jack-detection reporting for the
mic contact on the 2nd jack found on some devices, the
DAPM topology needs to have a separate DAPM pin/input for that
microphone, instead of re-using the "Internal Mic" pin which is
normally used together with the IN1P input of the codec.
Using the "Internal Mic" dapm-pin-switch for this in a snd_soc_jack_pin to
report hotplug events causes the "Internal Mic" pin to get deactivated
when unplugging a headset from the 2nd jack, thus turning off the actual
Internal Mic (typically a pair of digital mics on devices with 2 jacks).
Fixes: 79c1123bac ("ASoC: Intel: bytcr_rt5640: Add support for a second headset mic input")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210819190543.784415-6-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some devices don't use the builtin jack-detect but can still benefit
from the mic-bias-current over-current-detection to differentiate
between headphones vs a headset.
Move the ovcd init code from rt5640_enable_jack_detect() into a new
rt5640_set_ovcd_params() helper and export this helper as well
as a couple of related ovcd functions.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210819190543.784415-5-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some devices don't use the builtin jack-detect but can still benefit
from the mic-bias-current over-current-detection headphones vs
headset detection done by rt5640_detect_headset().
In this case the jack-inserted check done by rt5640_detect_headset()
needs to be done through a GPIO rather then by using the codec's
builtin jack-detect. Add an optional hp_det_gpio parameter and export
rt5640_detect_headset() for use on machines where jack-detect is
handled outside of the codec.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210819190543.784415-4-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Delay requesting the IRQ until the machine-drv calls set_jack.
The main reason for this is that the codec's IRQ is unused on some boards,
in which case we really should not call request_irq at all.
On some boards there is an IRQ listed at index 0 for the codec, but
this is not connected to the codec, but rather is directly connected
to the jack's jack-detect pin. These special setups will be handled
by the machine-driver, but the machine driver can only request the IRQ
if it is not first requested by the codec driver. Moving the request_irq
to the set_jack callback (which will not get called in this case) avoids
the codec-driver clobbering the IRQ.
Moving the request_irq also removes the need to disable the IRQ immediately
after requesting it, avoiding a small race (this could also have been fixed
by using the new IRQF_NO_AUTOEN flag when requesting the IRQ).
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210819190543.784415-3-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move rt5640_disable_jack_detect() to above rt5640_enable_jack_detect().
This is a preparation patch for reworking how the IRQ gets requested.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210819190543.784415-2-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Don't populate the arrays mul and div on the stack but instead make them
static const. Makes the object code smaller by 4 bytes.
Before:
text data bss dec hex filename
16226 4984 64 21274 531a ./sound/soc/uniphier/aio-cpu.o
After:
text data bss dec hex filename
16062 5144 64 21270 5316 ./sound/soc/uniphier/aio-cpu.o
(gcc version 10.2.0)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20210818151746.38520-1-colin.king@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
dma_request_chan() returns error pointer in case of failures, but
the rz_ssi_dma_request() checked for NULL pointer instead.
This patch fixes the issue by checking for ERR_PTR() instead of
NULL and sets the DMA pointers to NULL in error case so that ssi
can fallback to PIO mode.
Fixes: 26ac471c53 ("ASoC: sh: rz-ssi: Add SSI DMAC support")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Link: https://lore.kernel.org/r/20210818101450.15948-1-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The commit 2e6b836312 ("ASoC: intel: atom: Fix reference to PCM
buffer address") changed the reference of PCM buffer address to
substream->runtime->dma_addr as the buffer address may change
dynamically. However, I forgot that the dma_addr field is still not
set up for the CONTINUOUS buffer type (that this driver uses) yet in
5.14 and earlier kernels, and it resulted in garbage I/O. The problem
will be fixed in 5.15, but we need to address it quickly for now.
The fix is to deduce the address again from the DMA pointer with
virt_to_phys(), but from the right one, substream->runtime->dma_area.
Fixes: 2e6b836312 ("ASoC: intel: atom: Fix reference to PCM buffer address")
Reported-and-tested-by: Hans de Goede <hdegoede@redhat.com>
Cc: <stable@vger.kernel.org>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/2048c6aa-2187-46bd-6772-36a4fb3c5aeb@redhat.com
Link: https://lore.kernel.org/r/20210819152945.8510-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The mic has lots of noises if mic boost is enabled. So disable mic boost
to get crystal clear audio capture.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210818144119.121738-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Delete/fixup few includes in anticipation of global -isystem compile
option removal.
Note: crypto/aegis128-neon-inner.c keeps <stddef.h> due to redefinition
of uintptr_t error (one definition comes from <stddef.h>, another from
<linux/types.h>).
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Hopefully the last PR for 5.14: here includes only a few regression
fixes and trivial device quirks.
-----BEGIN PGP SIGNATURE-----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=ZKV7
-----END PGP SIGNATURE-----
Merge tag 'sound-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Only a few regression fixes and trivial device quirks"
* tag 'sound-5.14-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/via: Apply runtime PM workaround for ASUS B23E
ALSA: hda: Fix hang during shutdown due to link reset
ALSA: hda/realtek: Enable 4-speaker output for Dell XPS 15 9510 laptop
ALSA: oxfw: fix functioal regression for silence in Apogee Duet FireWire
ALSA: hda - fix the 'Capture Switch' value change notifications
The devm_clk_get() may return -EPROBE_DEFER, then clocks
will be assigned to NULL wrongly. As the clocks are
optional so we can use devm_clk_get_optional() instead of
devm_clk_get().
Fixes: b73d9e6225 ("ASoC: fsl_rpmsg: Add CPU DAI driver for audio base on rpmsg")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1629266614-6942-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
When CONFIG_PM is not set, there is an unused function warning:
sound/pci/hda/patch_analog.c:115:13: warning: unused function
'ad198x_shutup' [-Wunused-function]
static void ad198x_shutup(struct hda_codec *codec)
^
1 warning generated.
Sink ad198x_shutup() into ad198x_suspend(), as it is only called in that
one space. Move the CONFIG_PM guards above ad198x_power_eapd_write() as
it is only called in ad198x_power_eapd(), which is in turn only called
in ad198x_power_eapd(). Those two functions are large enough that they
are left alone.
Fixes: 327b34f2a9 ("ALSA: hda: Nuke unused reboot_notify callback")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20210818012705.311963-2-nathan@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When CONFIG_PM is not set, there is an unused function warning:
sound/pci/hda/patch_sigmatel.c:4383:13: warning: unused function
'stac_shutup' [-Wunused-function]
static void stac_shutup(struct hda_codec *codec)
^
1 warning generated.
Sink the contents of stac_shutup() into stac_suspend() since
stac_shutup() is only called in that one location now.
Fixes: 327b34f2a9 ("ALSA: hda: Nuke unused reboot_notify callback")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20210818012705.311963-1-nathan@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Use "cfg-lineout:2" in the components string on boards with a lineout
instead of "cfg-lineout:1", this better mirrors the speaker part of
the components string where we use "cfg-spk:1" for devices with a single
speaker and "cfg-spk:2" for stereo speakers.
The lineout is stereo by default, so using ":2" makes more sense, this
way we keep ":1" reserved in case we ever encounter a device with
a mono lineout.
We can make this change without breaking userspace because no kernel
has shipped with "cfg-lineout:1" in the component-string yet; and there
also are no userspace bits (UCM profiles) checking for this yet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210816114722.107363-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix wrong operator used issue reported by Coverity by replacing |
operator with & operator.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reported-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210816182336.29959-1-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The commit 0165c4e19f ("ALSA: hda: Fix hang during shutdown due to
link reset") modified the shutdown callback of the HD-audio controller
for working around a hang. Meanwhile, the actual culprit of the hang
was identified to be the leftover active codecs that may interfere
with the powered down controller somehow, but we took a minimal fix
approach for 5.14, and that was the commit above.
Now, since the codec drivers go runtime-suspend at shutdown for 5.15,
we can revert the change and make sure that the full runtime-suspend
is performed at shutdown of HD-audio controller again. This patch
essentially reverts the commit above to restore the behavior.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214045
Link: https://lore.kernel.org/r/20210817075630.7115-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Fix following sparse warning:
sound/soc/sh/rz-ssi.c:156:15: sparse: warning: dereference of
noderef expression
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/r/20210816132049.28128-1-biju.das.jz@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch cleanups below cppcheck warning.
sound/soc/soc-ac97.c:41:15: style: struct member 'snd_ac97_gpio_priv::gpios_set' is never used. [unusedStructMember]
unsigned int gpios_set;
^
sound/soc/soc-ac97.c:42:28: style: struct member 'snd_ac97_gpio_priv::component' is never used. [unusedStructMember]
struct snd_soc_component *component;
^
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r1euyolk.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch cleanups below cppcheck warning.
sound/soc/soc-component.c:1183:9: style: The scope of the variable 'ret' can be reduced. [variableScope]
int i, ret;
^
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sfzayolo.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch cleanups below cppcheck warning.
sound/soc/soc-jack.c:21:6: style: struct member 'jack_gpio_tbl::count' is never used. [unusedStructMember]
int count;
^
sound/soc/soc-jack.c:23:28: style: struct member 'jack_gpio_tbl::gpios' is never used. [unusedStructMember]
struct snd_soc_jack_gpio *gpios;
^
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87tujqyols.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch cleanups below cppcheck warning.
sound/soc/soc-jack.c:45:6: style: The scope of the variable 'enable' can be reduced. [variableScope]
int enable;
^
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v946yolx.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch cleanups below cppcheck warning.
sound/soc/soc-dai.c:553:13: style: Variable 'ret' is assigned a value that is never used. [unreadVariable]
int i, ret = 0;
^
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wnomyom1.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch cleanups below cppcheck warning.
sound/soc/soc-dai.c:454:7: style: The scope of the variable 'supported_cpu' can be reduced. [variableScope]
bool supported_cpu;
^
sound/soc/soc-dai.c:455:7: style: The scope of the variable 'supported_codec' can be reduced. [variableScope]
bool supported_codec;
^
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y292yom6.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch cleanups below cppcheck warning.
sound/soc/soc-generic-dmaengine-pcm.c:310:6: style: The scope of the variable 'ret' can be reduced. [variableScope]
int ret;
^
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zgtiyomb.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch cleanups below cppcheck warning.
sound/soc/soc-generic-dmaengine-pcm.c:233:28: style: The scope of the variable 'substream' can be reduced. [variableScope]
struct snd_pcm_substream *substream;
^
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871r6u0yzs.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch cleanups below cppcheck warning.
sound/soc/soc-generic-dmaengine-pcm.c:82:6: style: The scope of the variable 'ret' can be reduced. [variableScope]
int ret;
^
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/8735ra0yzz.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The 2021-model XPS 15 appears to use the same 4-speakers-on-ALC289 audio
setup as the Precision models, so requires the same quirk to enable woofer
output. Tested on my own 9510.
Signed-off-by: Kristin Paget <kristin@tombom.co.uk>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/e1fc95c5-c10a-1f98-a5c2-dd6e336157e1@tombom.co.uk
Signed-off-by: Takashi Iwai <tiwai@suse.de>
So far we have a few workarounds at shutdown for each codec,
e.g. turning off the display power and setting the codec to D3.
But all those are basically a part of the suspend procedure.
Moreover, the streams are still active after that call, hence it might
hit the update on the codec that has been already put to D3.
In this patch, instead of calling each reboot_notify callback, simply
put the codec into the runtime-suspended state after the manual
suspend of all PCM streams. It makes the code and the behavior more
consistent.
The reboot_notify callback is no longer used after this patch, and
will be cleaned up later.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=214045
Link: https://lore.kernel.org/r/20210813081230.4268-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ALSA PCM core has an optimized way to communicate with user-space for
its control and status data via mmap on the supported architectures
like x86. Depending on the situation, however, we'd rather want to
enforce user-space notifying the applptr or hwptr change explicitly
via ioctl. For example, the upcoming non-contig and non-coherent
buffer handling would need an explicit sync, and this needs to catch
the applptr and hwptr changes. Also, ASoC SOF driver will have the
SPIB support that has the similar requirement for the explicit control
of the applptr and hwptr.
This patch adds the new PCM hardware info flag,
SNDRV_PCM_INFO_EXPLICIT_SYNC. When this flag is set, PCM core
disables both the control and the status mmap, which enforces
user-space to update via SYNC_PTR ioctl. In that way, drivers can
catch the applptr and hwptr update and apply the sync operation if
needed.
Link: https://lore.kernel.org/r/20210812113818.6479-1-tiwai@suse.de
Link: https://lore.kernel.org/r/20210610205326.1176400-1-pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20210813082142.5375-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This adds a second mixer control to Digidesign Mbox
to select between Analog/SPDIF capture.
Users will note that selecting the SPDIF input source
automatically switches the clock mode to sync to SPDIF,
which is a feature of the hardware.
(You can change the clock source back to internal if you want
to capture from spdif but not sync to its clock although this mode
is probably not recommended).
Unfortunately, starting the stream resets both modes
to Internally clocked and Analog input mode.
Signed-off-by: Damien Zammit <damien@zamaudio.com>
Tested-by: Damien Zammit <damien@zamaudio.com>
Link: https://lore.kernel.org/r/20210813113402.11849-1-damien@zamaudio.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This is an update on an earlier contribution from Heikki Krogerus
The function device_add_properties() is going to be removed.
Replacing it with software node API equivalents.
Thanks for Hans de Goede and Andy Shevchenko for their comments,
suggestions and Reviewed-by tags on GitHub. The review thread can be
found at https://github.com/thesofproject/linux/pull/3041)
v3 changes:
Fixed nit-picks from Andy: label, return value, missing commas/periods.
Added Andy's Reviewed-by tag
v2 changes: feedback from Andy and Hans
Better error handling
Codec reference is kept until the .remove callback
Remove bus search to find device
v1 changes from Heikki's patches:
Avoid the use of devm_ routines for Baytrail machine drivers.
Heikki Krogerus (1):
ASoC: Intel: boards: use software node API in Atom boards
Pierre-Louis Bossart (7):
ASoC: Intel: boards: harden codec property handling
ASoC: Intel: boards: handle errors with acpi_dev_get_first_match_dev()
ASoC: Intel: boards: get codec device with ACPI instead of bus search
ASoC: Intel: sof_sdw: pass card information to init/exit functions
ASoC: Intel: sof_sdw_rt711*: keep codec device reference until remove
ASoC: Intel: use software node API in SoundWire machines
ASoC: Intel: remove device_properties for Atom boards
sound/soc/intel/boards/bytcht_es8316.c | 31 ++++++++--
sound/soc/intel/boards/bytcr_rt5640.c | 60 +++++++++++++++-----
sound/soc/intel/boards/bytcr_rt5651.c | 63 ++++++++++++++-------
sound/soc/intel/boards/sof_sdw.c | 20 ++++---
sound/soc/intel/boards/sof_sdw_common.h | 37 +++++++-----
sound/soc/intel/boards/sof_sdw_max98373.c | 3 +-
sound/soc/intel/boards/sof_sdw_rt1308.c | 3 +-
sound/soc/intel/boards/sof_sdw_rt1316.c | 3 +-
sound/soc/intel/boards/sof_sdw_rt5682.c | 3 +-
sound/soc/intel/boards/sof_sdw_rt700.c | 3 +-
sound/soc/intel/boards/sof_sdw_rt711.c | 51 +++++++++--------
sound/soc/intel/boards/sof_sdw_rt711_sdca.c | 52 +++++++++--------
sound/soc/intel/boards/sof_sdw_rt715.c | 3 +-
sound/soc/intel/boards/sof_sdw_rt715_sdca.c | 3 +-
14 files changed, 223 insertions(+), 112 deletions(-)
--
2.25.1
This patch series aims to add ASoC support on RZ/G2L SoC's.
It is based on the work done by Chris Brandt for RZ/A ASoC driver.
v4->v5
* Moved validation of sample bits in hw_params
* Removed validation of frame bits as it is redundant
* split the rz_ssi_start_stop function into rz_ssi_start and rz_ssi_stop.
* remove the spin_lock around rz_ssi_stream_init.
* Updated dmas description and removed fixes as it is an enhancement
now.
* updated ssi_start functions with setting fifo thresholds
and ssi_stop function with cancel all dma txn.
v3->v4:
* Updated the subject line as per style for the subsystem.
* Removed select SND_SIMPLE_CARD from Kconfig
* Added C++ comments for copyright and driver description.
* Moved validation of channels in hw_params
* removed asm issue reported by bot as well as Mark
* replaced master/slave macros with provider/consumer macros
* Improved locking and added more null pointer checks.
v2->v3:
* Fixed the dependency on KCONFIG
* Merged the binding patch with dma feature added
* Updated dt binding example with encoded #dma-cells value.
* Improved Error handling in probe function
* Removed the passing legacy channel configuration parameters from
dmaengine_slave_config function
* started using dma_request_chan instead of deprecated
dma_request_slave_channel
* Removed SoC dtsi and config patches from this series. Will send it later.
v1->v2:
* Rebased to latest rc kernel
Biju Das (3):
ASoC: sh: Add RZ/G2L SSIF-2 driver
ASoC: dt-bindings: renesas,rz-ssi: Update slave dma channel
configuration parameters
ASoC: sh: rz-ssi: Add SSI DMAC support
.../bindings/sound/renesas,rz-ssi.yaml | 22 +-
sound/soc/sh/Kconfig | 6 +
sound/soc/sh/Makefile | 4 +
sound/soc/sh/rz-ssi.c | 1063 +++++++++++++++++
4 files changed, 1093 insertions(+), 2 deletions(-)
create mode 100644 sound/soc/sh/rz-ssi.c
--
2.17.1
This patchset provides an optimization that result in significant power
savings on Intel HDAudio platforms using SOF (Sound Open Firmware).
We previously prevented the Intel DSP from enabling the DMI_L1
capability to work-around issues with pause on capture streams. It
turns out that this also prevented the platform from entering high C
states in full-duplex usages such as videoconferencing - a rather
basic use case since the start of the pandemic.
The support for pause_push/release was already a bit controversial for
Intel platforms, in theory platforms should only enable PAUSE if they
can resume on the same sample, which is not the case on any Intel
platform.
With this patchset, when the user enables DMI L1 via a kernel
parameter, the PAUSE support is disabled for capture streams. A kernel
parameter is far from ideal but it's a placeholder until we have an
API to negotiate capabilities between applications and driver, and
it's far less confusing than a Kconfig option.
Changes since v1:
Removal of SPIB support since it may conflict with Takashi's memalloc
changes. These SPIB changes will be provided after rebase.
Addition of one cleanup for cppcheck warning
Move all changes to intel/ directory, no changes in shared code
Flipped the logic: the selection of DMI L1 disables PAUSE
Pierre-Louis Bossart (4):
ASoC: SOF: Intel: Kconfig: clarify DMI L1 option description
ASoC: SOF: Intel: hda-stream: remove always true condition
ASoC: SOF: Intel: simplify logic for DMI_L1 handling
ASoC: SOF: Intel: make DMI L1 selection more robust
sound/soc/sof/intel/Kconfig | 10 ----------
sound/soc/sof/intel/hda-pcm.c | 16 ++++++++++++++--
sound/soc/sof/intel/hda-stream.c | 11 +++++------
3 files changed, 19 insertions(+), 18 deletions(-)
--
2.25.1
The function device_add_properties() is going to be removed.
Replacing it with software node API equivalents.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Co-developed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20210813151116.23931-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Prepare the transition to the software node API by removing device
properties in the probe error handling and .remove callback.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210813151116.23931-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The function device_add_properties() is going to be removed.
Replacing it with software node API equivalents.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Co-developed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210813151116.23931-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Follow the example of Intel Atom drivers and keep a reference to the
headset codec until the properties are removed.
There is no guarantee that the module for the codec driver is loaded
before the machine driver probe, the use of the deferred probe
mechanism is required.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210813151116.23931-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
If we want to handle a context in init/exit function, we have to pass
the card information. This will be necessary to better deal with
device properties in the follow-up commits.
No functional change other than prototype update.
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210813151116.23931-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have an existing 'adev' handle from which we can find the codec
device, no need for an I2C bus search.
Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210813151116.23931-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Colin Ian King
Robin Murphy
Shengjiu Wang
Derek Fang
Peter Ujfalusi
Mark Brown
Changcheng Deng
Trevor Wu
Charles Keepax
Greg Kroah-Hartman
Takashi Iwai
Johnathon Clark
Tzung-Bi Shih
Hans de Goede
Angelo Dureghello
Cezary Rojewski
Pawel Harlozinski
Szymon Mielczarek
Kareem Shaik
Gustaw Lewandowski
Piotr Maziarz
Takashi Sakamoto
Linus Torvalds
Kuninori Morimoto
Biju Das
Kai-Heng Feng
Alexey Dobriyan
Nathan Chancellor
Aakash Hemadri
Imre Deak
Kristin Paget
Damien Zammit
Heikki Krogerus
Pierre-Louis Bossart