Граф коммитов

1443 Коммитов

Автор SHA1 Сообщение Дата
Stephen Hemminger 6b80d6a6b4 pktgen: T_TERMINATE flag is unused
Get rid of unused flag bit.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-24 15:38:46 -07:00
Jan Beulich 4481374ce8 mm: replace various uses of num_physpages by totalram_pages
Sizing of memory allocations shouldn't depend on the number of physical
pages found in a system, as that generally includes (perhaps a huge amount
of) non-RAM pages.  The amount of what actually is usable as storage
should instead be used as a basis here.

Some of the calculations (i.e.  those not intending to use high memory)
should likely even use (totalram_pages - totalhigh_pages).

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Acked-by: Ingo Molnar <mingo@elte.hu>
Cc: Dave Airlie <airlied@linux.ie>
Cc: Kyle McMartin <kyle@mcmartin.ca>
Cc: Jeremy Fitzhardinge <jeremy@goop.org>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Cc: Hugh Dickins <hugh.dickins@tiscali.co.uk>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Patrick McHardy <kaber@trash.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22 07:17:38 -07:00
Linus Torvalds f205ce83a7 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (66 commits)
  be2net: fix some cmds to use mccq instead of mbox
  atl1e: fix 2.6.31-git4 -- ATL1E 0000:03:00.0: DMA-API: device driver frees DMA
  pkt_sched: Fix qstats.qlen updating in dump_stats
  ipv6: Log the affected address when DAD failure occurs
  wl12xx: Fix print_mac() conversion.
  af_iucv: fix race when queueing skbs on the backlog queue
  af_iucv: do not call iucv_sock_kill() twice
  af_iucv: handle non-accepted sockets after resuming from suspend
  af_iucv: fix race in __iucv_sock_wait()
  iucv: use correct output register in iucv_query_maxconn()
  iucv: fix iucv_buffer_cpumask check when calling IUCV functions
  iucv: suspend/resume error msg for left over pathes
  wl12xx: switch to %pM to print the mac address
  b44: the poll handler b44_poll must not enable IRQ unconditionally
  ipv6: Ignore route option with ROUTER_PREF_INVALID
  bonding: make ab_arp select active slaves as other modes
  cfg80211: fix SME connect
  rc80211_minstrel: fix contention window calculation
  ssb/sdio: fix printk format warnings
  p54usb: add Zcomax XG-705A usbid
  ...
2009-09-17 20:53:52 -07:00
David Brownell a4dbd6740d driver model: constify attribute groups
Let attribute group vectors be declared "const".  We'd
like to let most attribute metadata live in read-only
sections... this is a start.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-15 09:50:47 -07:00
Moni Shoua 75c78500dd bonding: remap muticast addresses without using dev_close() and dev_open()
This patch fixes commit e36b9d16c6. The approach
there is to call dev_close()/dev_open() whenever the device type is changed in
order to remap the device IP multicast addresses to HW multicast addresses.
This approach suffers from 2 drawbacks:

*. It assumes tha the device is UP when calling dev_close(), or otherwise
   dev_close() has no affect. It is worth to mention that initscripts (Redhat)
   and sysconfig (Suse) doesn't act the same in this matter. 
*. dev_close() has other side affects, like deleting entries from the routing
   table, which might be unnecessary.

The fix here is to directly remap the IP multicast addresses to HW multicast
addresses for a bonding device that changes its type, and nothing else.
   
Reported-by:   Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Moni Shoua <monis@voltaire.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-15 02:37:40 -07:00
Linus Torvalds d7e9660ad9 Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (1623 commits)
  netxen: update copyright
  netxen: fix tx timeout recovery
  netxen: fix file firmware leak
  netxen: improve pci memory access
  netxen: change firmware write size
  tg3: Fix return ring size breakage
  netxen: build fix for INET=n
  cdc-phonet: autoconfigure Phonet address
  Phonet: back-end for autoconfigured addresses
  Phonet: fix netlink address dump error handling
  ipv6: Add IFA_F_DADFAILED flag
  net: Add DEVTYPE support for Ethernet based devices
  mv643xx_eth.c: remove unused txq_set_wrr()
  ucc_geth: Fix hangs after switching from full to half duplex
  ucc_geth: Rearrange some code to avoid forward declarations
  phy/marvell: Make non-aneg speed/duplex forcing work for 88E1111 PHYs
  drivers/net/phy: introduce missing kfree
  drivers/net/wan: introduce missing kfree
  net: force bridge module(s) to be GPL
  Subject: [PATCH] appletalk: Fix skb leak when ipddp interface is not loaded
  ...

Fixed up trivial conflicts:

 - arch/x86/include/asm/socket.h

   converted to <asm-generic/socket.h> in the x86 tree.  The generic
   header has the same new #define's, so that works out fine.

 - drivers/net/tun.c

   fix conflict between 89f56d1e9 ("tun: reuse struct sock fields") that
   switched over to using 'tun->socket.sk' instead of the redundantly
   available (and thus removed) 'tun->sk', and 2b980dbd ("lsm: Add hooks
   to the TUN driver") which added a new 'tun->sk' use.

   Noted in 'next' by Stephen Rothwell.
2009-09-14 10:37:28 -07:00
Stephen Hemminger 4fb019a01a net: force bridge module(s) to be GPL
The only valid usage for the bridge frame hooks are by a
GPL components (such as the bridge module).
The kernel should not leave a crack in the door for proprietary
networking stacks to slip in.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-11 12:54:26 -07:00
James Morris a3c8b97396 Merge branch 'next' into for-linus 2009-09-11 08:04:49 +10:00
Patrick McHardy af356afa01 net_sched: reintroduce dev->qdisc for use by sch_api
Currently the multiqueue integration with the qdisc API suffers from
a few problems:

- with multiple queues, all root qdiscs use the same handle. This means
  they can't be exposed to userspace in a backwards compatible fashion.

- all API operations always refer to queue number 0. Newly created
  qdiscs are automatically shared between all queues, its not possible
  to address individual queues or restore multiqueue behaviour once a
  shared qdisc has been attached.

- Dumps only contain the root qdisc of queue 0, in case of non-shared
  qdiscs this means the statistics are incomplete.

This patch reintroduces dev->qdisc, which points to the (single) root qdisc
from userspace's point of view. Currently it either points to the first
(non-shared) default qdisc, or a qdisc shared between all queues. The
following patches will introduce a classful dummy qdisc, which will be used
as root qdisc and contain the per-queue qdiscs as children.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-06 02:07:03 -07:00
Eric Dumazet 55f9d6786d net: Remove debugging code
Remove a debugging aid I accidently left in previous 'cleanup' patch

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-03 05:17:20 -07:00
Eric Dumazet d1b19dff91 net: net/core/dev.c cleanups
Pure style cleanup patch before surgery :)

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-03 01:29:39 -07:00
Ajit Khaparde 05c6a8d7a7 net/ethtool: Add support for the ethtool feature to flash firmware image from a specified file.
This patch adds support to flash a firmware image to a device using ethtool.
The driver gets the filename of the firmware image and flashes the image
using the request firmware path.

The region "on the chip" to be flashed can be specified by an option.
It is upto the device driver to enumerate the region number passed by ethtool,
to the region to be flashed.

The default behavior is to flash all the regions on the chip.

Signed-off-by: Ajit Khaparde <ajitk@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-02 23:07:39 -07:00
Eric Dumazet 2e59af3dcb vlan: multiqueue vlan device
vlan devices are currently not multi-queue capable.

We can do that with a new rtnl_link_ops method,
get_tx_queues(), called from rtnl_create_link()

This new method gets num_tx_queues/real_num_tx_queues
from real device.

register_vlan_device() is also handled.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-02 18:03:00 -07:00
Neil Horman 5848cc096a net: drop_monitor: make last_rx timestamp private
It was recently pointed out to me that the last_rx field of the
net_device structure wasn't updated regularly.  In fact only the
bonding driver really uses it currently.  Since the drop_monitor code
relies on the last_rx field to detect drops on recevie in hardware, We
need to find a more reliable way to rate limit our drop checks (so
that we don't check for drops on every frame recevied, which would be
inefficient.  This patch makes a last_rx timestamp that is private to
the drop monitor code and is updated for every device that we track.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-02 14:37:45 -07:00
David S. Miller 6cdee2f96a Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	drivers/net/yellowfin.c
2009-09-02 00:32:56 -07:00
Xiao Guangrong f2798eb4e0 drop_monitor: fix trace_napi_poll_hit()
The net_dev of backlog napi is NULL, like below:

__get_cpu_var(softnet_data).backlog.dev == NULL

So, we should check it in napi tracepoint's probe function

Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01 18:18:12 -07:00
Jarek Poplawski d66ee0587c net: sk_free() should be allowed right after sk_alloc()
After commit 2b85a34e91
(net: No more expensive sock_hold()/sock_put() on each tx)
sk_free() frees socks conditionally and depends
on sk_wmem_alloc being set e.g. in sock_init_data(). But in some
cases sk_free() is called earlier, usually after other alloc errors.

Fix is to move sk_wmem_alloc initialization from sock_init_data()
to sk_alloc() itself.

Signed-off-by: Jarek Poplawski <jarkao2@gmail.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01 17:49:00 -07:00
Stephen Hemminger 6fef4c0c8e netdev: convert pseudo-devices to netdev_tx_t
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-01 01:13:07 -07:00
Krishna Kumar 03a9a447d2 net: convert remaining non-symbolic return values in dev_queue_xmit
Patch compiled and 32 simultaneous netperf testing ran fine.

Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-30 22:16:57 -07:00
Alexey Dobriyan 2975315b79 pktgen: use proc_create_data()
It looks like after rename device proc entry is unusable,
because of no ->read_proc or ->proc_fops.

And create_proc_entry() is deprecated.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28 23:41:43 -07:00
Stephen Hemminger c3d2f52dd4 pktgen: increase version
Increase module version, and cleanup module info.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28 23:41:39 -07:00
Stephen Hemminger 63adc6fb8a pktgen: cleanup checkpatch warnings
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28 23:41:37 -07:00
Stephen Hemminger 64e8ff5ef2 pktgen: use common idle routine
Simpler to have one place that spins and accounts for delays,
this will also make the last packet be detected faster for more
repeatable timing.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28 23:41:36 -07:00
Stephen Hemminger 2bc481cf43 pktgen: spin using hrtimer
This changes how the pktgen thread spins/waits between
packets if delay is configured. It uses a high res timer to
wait for time to arrive.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28 23:41:29 -07:00
Stephen Hemminger fd29cf7262 pktgen: convert to use ktime_t
The kernel ktime_t is a nice generic infrastructure for mananging
high resolution times, as is done in pktgen.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28 23:32:12 -07:00
Stephen Hemminger 5c9d191c16 pktgen: avoid calling gettimeofday
If not using delay then no need to update next_tx after
each packet sent. This allows pktgen to send faster especially
on systems with slower clock sources.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28 23:32:09 -07:00
Stephen Hemminger 5b8db2f568 pktgen: reorganize transmit loop
Handle standard (and non-standard) return values in a switch.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28 23:32:07 -07:00
Stephen Hemminger e470757d61 pktgen: use netdev_alloc_skb
netdev_alloc_skb is NUMA node aware.
Also, don't exhaust atomic emergency pool. Don't want pktgen
to cause OOM behaviour.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28 23:32:04 -07:00
Stephen Hemminger 7d7bb1cf0e pktgen: cleanup clone count test
The if statement to test for "should a new packet be used"
can be simplified.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28 23:32:00 -07:00
Stephen Hemminger 3791decb5a pktgen: xmit logic reorganization
Do some reorganization of transmit logic path:
   * move transmit queue full idle to separate routine
   * add a cpu_relax()
   * eliminate some of the uneeded goto's
   * if queue is still stopped, go back to main thread loop.
   * don't give up transmitting if quantum is exhausted (be greedy)

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28 23:31:55 -07:00
Stephen Hemminger 3bda06a3d7 pktgen: stop_device cleanup
All the callers were freeing skb after stopping device.
Remove unneeded forward decl.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28 23:31:53 -07:00
Stephen Hemminger 65c5b786a3 pktgen: mark read-only/mostly variables
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28 23:31:51 -07:00
Stephen Hemminger 475ac1e409 pktgen: change inlining
Don't force inlining where not needed. Gcc does better job
of deciding to inline local functions.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28 23:31:47 -07:00
Stephen Hemminger 648fda7404 pktgen: minor cleanup
A couple of minor functions can be written more compactly.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-28 23:31:45 -07:00
Dongdong Deng 79b1bee888 netpoll: warning for ndo_start_xmit returns with interrupts enabled
WARN_ONCE for ndo_start_xmit() enable interrupts in netpoll_send_skb(),
because the NETPOLL API requires that interrupts remain disabled in
netpoll_send_skb().

Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-23 19:50:59 -07:00
James Morris ece13879e7 Merge branch 'master' into next
Conflicts:
	security/Kconfig

Manual fix.

Signed-off-by: James Morris <jmorris@namei.org>
2009-08-20 09:18:42 +10:00
Dmitry Eremin-Solenikov 929122cdd5 Drop ARPHRD_IEEE802154_PHY
There are not maste devices in mac802154 anymore, so drop
ARPHRD_IEEE802154_PHY definition.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
2009-08-19 23:08:24 +04:00
Eric Dumazet c1a8f1f1c8 net: restore gnet_stats_basic to previous definition
In 5e140dfc1f "net: reorder struct Qdisc
for better SMP performance" the definition of struct gnet_stats_basic
changed incompatibly, as copies of this struct are shipped to
userland via netlink.

Restoring old behavior is not welcome, for performance reason.

Fix is to use a private structure for kernel, and
teach gnet_stats_copy_basic() to convert from kernel to user land,
using legacy structure (struct gnet_stats_basic)

Based on a report and initial patch from Michael Spang.

Reported-by: Michael Spang <mspang@csclub.uwaterloo.ca>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-17 21:33:49 -07:00
Eric Paris a8f80e8ff9 Networking: use CAP_NET_ADMIN when deciding to call request_module
The networking code checks CAP_SYS_MODULE before using request_module() to
try to load a kernel module.  While this seems reasonable it's actually
weakening system security since we have to allow CAP_SYS_MODULE for things
like /sbin/ip and bluetoothd which need to be able to trigger module loads.
CAP_SYS_MODULE actually grants those binaries the ability to directly load
any code into the kernel.  We should instead be protecting modprobe and the
modules on disk, rather than granting random programs the ability to load code
directly into the kernel.  Instead we are going to gate those networking checks
on CAP_NET_ADMIN which still limits them to root but which does not grant
those processes the ability to load arbitrary code into the kernel.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Acked-by: Paul Moore <paul.moore@hp.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: James Morris <jmorris@namei.org>
2009-08-14 11:18:34 +10:00
Neil Horman e9b3cc1b37 net: skb ftracer - add tracepoint to skb_copy_datagram_iovec (v3)
skb allocation / cosumption tracer - Add consumption tracepoint

This patch adds a tracepoint to skb_copy_datagram_iovec, which is called each
time a userspace process copies a frame from a socket receive queue to a user
space buffer.  It allows us to hook in and examine each sk_buff that the system
receives on a per-socket bases, and can be use to compile a list of which skb's
were received by which processes.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>

 include/trace/events/skb.h |   20 ++++++++++++++++++++
 net/core/datagram.c        |    3 +++
 2 files changed, 23 insertions(+)
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13 16:26:14 -07:00
David S. Miller aa11d958d1 Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
Conflicts:
	arch/microblaze/include/asm/socket.h
2009-08-12 17:44:53 -07:00
Krishna Kumar bbd8a0d3a3 net: Avoid enqueuing skb for default qdiscs
dev_queue_xmit enqueue's a skb and calls qdisc_run which
dequeue's the skb and xmits it. In most cases, the skb that
is enqueue'd is the same one that is dequeue'd (unless the
queue gets stopped or multiple cpu's write to the same queue
and ends in a race with qdisc_run). For default qdiscs, we
can remove the redundant enqueue/dequeue and simply xmit the
skb since the default qdisc is work-conserving.

The patch uses a new flag - TCQ_F_CAN_BYPASS to identify the
default fast queue. The controversial part of the patch is
incrementing qlen when a skb is requeued - this is to avoid
checks like the second line below:

+  } else if ((q->flags & TCQ_F_CAN_BYPASS) && !qdisc_qlen(q) &&
>>         !q->gso_skb &&
+          !test_and_set_bit(__QDISC_STATE_RUNNING, &q->state)) {

Results of a 2 hour testing for multiple netperf sessions (1,
2, 4, 8, 12 sessions on a 4 cpu system-X). The BW numbers are
aggregate Mb/s across iterations tested with this version on
System-X boxes with Chelsio 10gbps cards:

----------------------------------
Size |  ORG BW          NEW BW   |
----------------------------------
128K |  156964          159381   |
256K |  158650          162042   |
----------------------------------

Changes from ver1:

1. Move sch_direct_xmit declaration from sch_generic.h to
   pkt_sched.h
2. Update qdisc basic statistics for direct xmit path.
3. Set qlen to zero in qdisc_reset.
4. Changed some function names to more meaningful ones.

Signed-off-by: Krishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-06 20:10:18 -07:00
Jan Engelhardt 0d6038ee76 net: implement a SO_DOMAIN getsockoption
This sockopt goes in line with SO_TYPE and SO_PROTOCOL. It makes it
possible for userspace programs to pass around file descriptors — I
am referring to arguments-to-functions, but it may even work for the
fd passing over UNIX sockets — without needing to also pass the
auxiliary information (PF_INET6/IPPROTO_TCP).

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-05 13:02:57 -07:00
Jan Engelhardt 49c794e946 net: implement a SO_PROTOCOL getsockoption
Similar to SO_TYPE returning the socket type, SO_PROTOCOL allows to
retrieve the protocol used with a given socket.

I am not quite sure why we have that-many copies of socket.h, and why
the values are not the same on all arches either, but for where hex
numbers dominate, I use 0x1029 for SO_PROTOCOL as that seems to be
the next free unused number across a bunch of operating systems, or
so Google results make me want to believe. SO_PROTOCOL for others
just uses the next free Linux number, 38.

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-05 13:02:56 -07:00
Jan Engelhardt 36cbd3dcc1 net: mark read-only arrays as const
String literals are constant, and usually, we can also tag the array
of pointers const too, moving it to the .rodata section.

Signed-off-by: Jan Engelhardt <jengelh@medozas.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-05 10:42:58 -07:00
Ingo Molnar 0bf52b9817 net: Fix spinlock use in alloc_netdev_mq()
-tip testing found this lockdep warning:

[    2.272010] calling  net_dev_init+0x0/0x164 @ 1
[    2.276033] device class 'net': registering
[    2.280191] INFO: trying to register non-static key.
[    2.284005] the code is fine but needs lockdep annotation.
[    2.284005] turning off the locking correctness validator.
[    2.284005] Pid: 1, comm: swapper Not tainted 2.6.31-rc5-tip #1145
[    2.284005] Call Trace:
[    2.284005]  [<7958eb4e>] ? printk+0xf/0x11
[    2.284005]  [<7904f83c>] __lock_acquire+0x11b/0x622
[    2.284005]  [<7908c9b7>] ? alloc_debug_processing+0xf9/0x144
[    2.284005]  [<7904e2be>] ? mark_held_locks+0x3a/0x52
[    2.284005]  [<7908dbc4>] ? kmem_cache_alloc+0xa8/0x13f
[    2.284005]  [<7904e475>] ? trace_hardirqs_on_caller+0xa2/0xc3
[    2.284005]  [<7904fdf6>] lock_acquire+0xb3/0xd0
[    2.284005]  [<79489678>] ? alloc_netdev_mq+0xf5/0x1ad
[    2.284005]  [<79591514>] _spin_lock_bh+0x2d/0x5d
[    2.284005]  [<79489678>] ? alloc_netdev_mq+0xf5/0x1ad
[    2.284005]  [<79489678>] alloc_netdev_mq+0xf5/0x1ad
[    2.284005]  [<793a38f2>] ? loopback_setup+0x0/0x74
[    2.284005]  [<798eecd0>] loopback_net_init+0x20/0x5d
[    2.284005]  [<79483efb>] register_pernet_device+0x23/0x4b
[    2.284005]  [<798f5c9f>] net_dev_init+0x115/0x164
[    2.284005]  [<7900104f>] do_one_initcall+0x4a/0x11a
[    2.284005]  [<798f5b8a>] ? net_dev_init+0x0/0x164
[    2.284005]  [<79066f6d>] ? register_irq_proc+0x8c/0xa8
[    2.284005]  [<798cc29a>] do_basic_setup+0x42/0x52
[    2.284005]  [<798cc30a>] kernel_init+0x60/0xa1
[    2.284005]  [<798cc2aa>] ? kernel_init+0x0/0xa1
[    2.284005]  [<79003e03>] kernel_thread_helper+0x7/0x10
[    2.284078] device: 'lo': device_add
[    2.288248] initcall net_dev_init+0x0/0x164 returned 0 after 11718 usecs
[    2.292010] calling  neigh_init+0x0/0x66 @ 1
[    2.296010] initcall neigh_init+0x0/0x66 returned 0 after 0 usecs

it's using an zero-initialized spinlock. This is a side-effect of:

        dev_unicast_init(dev);

in alloc_netdev_mq() making use of dev->addr_list_lock.

The device has just been allocated freshly, it's not accessible
anywhere yet so no locking is needed at all - in fact it's wrong
to lock it here (the lock isnt initialized yet).

This bug was introduced via:

| commit a6ac65db23
| Date:   Thu Jul 30 01:06:12 2009 +0000
|
|     net: restore the original spinlock to protect unicast list

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Acked-by: Jiri Pirko <jpirko@redhat.com>
Tested-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-05 08:35:11 -07:00
Eric Dumazet e4c4e448cf neigh: Convert garbage collection from softirq to workqueue
Current neigh_periodic_timer() function is fired by timer IRQ, and
scans one hash bucket each round (very litle work in fact)

As we are supposed to scan whole hash table in 15 seconds, this means
neigh_periodic_timer() can be fired very often. (depending on the number
of concurrent hash entries we stored in this table)

Converting this to a workqueue permits scanning whole table, minimizing
icache pollution, and firing this work every 15 seconds, independantly
of hash table size.

This 15 seconds delay is not a hard number, as work is a deferrable one.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-02 18:35:16 -07:00
Jiri Pirko a6ac65db23 net: restore the original spinlock to protect unicast list
There is a path when an assetion in dev_unicast_sync() appears.

igmp6_group_added -> dev_mc_add -> __dev_set_rx_mode ->
-> vlan_dev_set_rx_mode -> dev_unicast_sync

Therefore we cannot protect this list with rtnl. This patch restores the
original protecting this list with spinlock.

Signed-off-by: Jiri Pirko <jpirko@redhat.com>
Tested-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-02 12:20:46 -07:00
Eric Dumazet 144586301f net: net_assign_generic() fix
memcpy() should take into account size of pointers,
not only number of pointers to copy.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Pavel Emelyanov <xemul@openvz.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-02 12:20:36 -07:00
David S. Miller 2f6d7c1b34 Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 2009-07-30 19:26:55 -07:00