Граф коммитов

171 Коммитов

Автор SHA1 Сообщение Дата
YueHaibing 060e8fb53f ipmi: fix return value of ipmi_set_my_LUN
Fixes gcc '-Wunused-but-set-variable' warning:

drivers/char/ipmi/ipmi_msghandler.c: In function 'ipmi_set_my_LUN':
drivers/char/ipmi/ipmi_msghandler.c:1335:13: warning:
 variable 'rv' set but not used [-Wunused-but-set-variable]
  int index, rv = 0;

'rv' should be the correct return value.

Fixes: 048f7c3e35 ("ipmi: Properly release srcu locks on error conditions")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-09-18 16:15:33 -05:00
Joe Perches 445e2cbda9 ipmi: msghandler: Add and use pr_fmt and dev_fmt, remove PFX
Standardize the prefixing of output messages using the pr_fmt and dev_fmt
mechanisms instead of a separate #define PFX

Miscellanea:

o Because this message prefix is very long, use a non-standard define
  of #define pr_fmt(fmt) "%s" fmt, "IPMI message handler: "
  which removes ~170 bytes of object code in an x86-64 defconfig with ipmi
  (with even more object code reduction on 32 bit compilations)

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-09-18 16:15:33 -05:00
Corey Minyard 2512e40e48 ipmi: Rework SMI registration failure
There were certain situations where ipmi_register_smi() would
return a failure, but the interface would still be registered
and would need to be unregistered.  This is obviously a bad
design and resulted in an oops in certain failure cases.

If the interface is started up in ipmi_register_smi(), then
an error occurs, shut down the interface there so the
cleanup can be done properly.

Fix the various smi users, too.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reported-by: Justin Ernst <justin.ernst@hpe.com>
Tested-by: Justin Ernst <justin.ernst@hpe.com>
Cc: Andrew Banman <abanman@hpe.com>
Cc: Russ Anderson <russ.anderson@hpe.com>
Cc: <stable@vger.kernel.org> # 4.18.x
2018-08-31 08:42:29 -05:00
Corey Minyard 048f7c3e35 ipmi: Properly release srcu locks on error conditions
When SRCU was added for handling hotplug, some error conditions
were not handled properly.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-05-24 15:08:30 -05:00
Corey Minyard 163475ebf9 ipmi: Remove the proc interface
It has been deprecated long enough, get rid of it.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-05-09 12:21:46 -05:00
Corey Minyard 6a0d23ed33 ipmi: ipmi_unregister_smi() cannot fail, have it return void
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18 10:23:05 -05:00
Corey Minyard 8d17929ad5 ipmi: Remove condition on interface shutdown
Now that the interfaces have shutdown handlers, this no longer
needs to be conditional.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18 10:23:01 -05:00
Corey Minyard e86ee2d44b ipmi: Rework locking and shutdown for hot remove
To handle hot remove of interfaces, a lot of rework had to be
done to the locking.  Several things were switched over to srcu
and shutdown for users and interfaces was added for cleaner
shutdown.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18 10:22:58 -05:00
Corey Minyard ac93bd0c9e ipmi: Fix some counter issues
Counters would not be pegged properly on some errors.  Have
deliver_response() return an error so the counters can be
incremented properly.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18 10:22:57 -05:00
Corey Minyard a567b62300 ipmi: Change ipmi_smi_t to struct ipmi_smi *
Get rid of this coding style violation in the user files.  Include
files will come later.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18 10:22:56 -05:00
Corey Minyard 2911c9886c ipmi: Rename ipmi_user_t to struct ipmi_user *
Get rid of that non-compliance in the user files.  Include files
will come later.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18 10:22:55 -05:00
Corey Minyard aa7a8f9e1b ipmi: Clean up some style issues in the message handler
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18 10:22:52 -05:00
Corey Minyard 42c2dc7e66 ipmi: Break up i_ipmi_request
It was huge, and easily broken into pieces.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18 10:22:51 -05:00
Corey Minyard f41382ae57 ipmi: Clean up some debug code
Replace ifdefs in the code with a simple function.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18 10:22:48 -05:00
Corey Minyard 91e2dd0a47 ipmi: Add a panic handler for IPMI users
Users of the IPMI code had their own panic handlers, but the
order was not necessarily right, the base IPMI code would
need to handle the panic first, and the user had no way to
know if the IPMI interface could run at panic time.

Add a panic handler to the user interface, it is called if
non-NULL and the interface the user is on is capable of panic
handling.  It also cleans up the panic log handling a bit to
reuse the existing interface loop in the main panic handler.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18 10:22:47 -05:00
Corey Minyard 252e30c1e7 ipmi: Add a maintenance mode for IPMB messages
If you send a command to another BMC that might take some extra
time, increase the timeouts temporarily.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-04-18 10:22:43 -05:00
Corey Minyard ce7fa1c38d ipmi: Add a way to tune some timeouts
By default the retry timeout is 1 second.  Allow that to be modified,
primarily for slow operations, like firmware writes.

Also, the timeout was driven by a 1 second timer, so 1 second really
meant between 0 and 1 second.  Set the default to 2 seconds so it
means between 1 and 2 seconds.

Also allow the time the interface automatically stays in mainenance
mode to be modified from it's default 30 seconds.

Also consolidate some of the timeout and retry setup.

Signed-off-by: Corey Minyard <cminyard@mvista.com>

more
2018-04-18 10:22:42 -05:00
Corey Minyard 243ac21035 ipmi: Add or fix SPDX-License-Identifier in all files
And get rid of the license text that is no longer necessary.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Alistair Popple <alistair@popple.id.au>
Cc: Jeremy Kerr <jk@ozlabs.org>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Rocky Craig <rocky.craig@hp.com>
2018-02-27 07:42:51 -06:00
Linus Torvalds 47fcc0360c Driver Core updates for 4.16-rc1
Here is the set of "big" driver core patches for 4.16-rc1.
 
 The majority of the work here is in the firmware subsystem, with reworks
 to try to attempt to make the code easier to handle in the long run, but
 no functional change.  There's also some tree-wide sysfs attribute
 fixups with lots of acks from the various subsystem maintainers, as well
 as a handful of other normal fixes and changes.
 
 And finally, some license cleanups for the driver core and sysfs code.
 
 All have been in linux-next for a while with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWnLvPw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynNzACgkzjPoBytJWbpWFt6SR6L33/u4kEAnRFvVCGL
 s6ygQPQhZIjKk2Lxa2hC
 =Zihy
 -----END PGP SIGNATURE-----

Merge tag 'driver-core-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
 "Here is the set of "big" driver core patches for 4.16-rc1.

  The majority of the work here is in the firmware subsystem, with
  reworks to try to attempt to make the code easier to handle in the
  long run, but no functional change. There's also some tree-wide sysfs
  attribute fixups with lots of acks from the various subsystem
  maintainers, as well as a handful of other normal fixes and changes.

  And finally, some license cleanups for the driver core and sysfs code.

  All have been in linux-next for a while with no reported issues"

* tag 'driver-core-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (48 commits)
  device property: Define type of PROPERTY_ENRTY_*() macros
  device property: Reuse property_entry_free_data()
  device property: Move property_entry_free_data() upper
  firmware: Fix up docs referring to FIRMWARE_IN_KERNEL
  firmware: Drop FIRMWARE_IN_KERNEL Kconfig option
  USB: serial: keyspan: Drop firmware Kconfig options
  sysfs: remove DEBUG defines
  sysfs: use SPDX identifiers
  drivers: base: add coredump driver ops
  sysfs: add attribute specification for /sysfs/devices/.../coredump
  test_firmware: fix missing unlock on error in config_num_requests_store()
  test_firmware: make local symbol test_fw_config static
  sysfs: turn WARN() into pr_warn()
  firmware: Fix a typo in fallback-mechanisms.rst
  treewide: Use DEVICE_ATTR_WO
  treewide: Use DEVICE_ATTR_RO
  treewide: Use DEVICE_ATTR_RW
  sysfs.h: Use octal permissions
  component: add debugfs support
  bus: simple-pm-bus: convert bool SIMPLE_PM_BUS to tristate
  ...
2018-02-01 10:00:28 -08:00
Joe Perches c828a89203 treewide: Use DEVICE_ATTR_RO
Convert DEVICE_ATTR uses to DEVICE_ATTR_RO where possible.

Done with perl script:

$ git grep -w --name-only DEVICE_ATTR | \
  xargs perl -i -e 'local $/; while (<>) { s/\bDEVICE_ATTR\s*\(\s*(\w+)\s*,\s*\(?(?:\s*S_IRUGO\s*|\s*0444\s*)\)?\s*,\s*\1_show\s*,\s*NULL\s*\)/DEVICE_ATTR_RO(\1)/g; print;}'

Signed-off-by: Joe Perches <joe@perches.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Acked-by: Zhang Rui <rui.zhang@intel.com>
Acked-by: Harald Freudenberger <freude@linux.vnet.ibm.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-01-09 16:34:34 +01:00
Xiongfeng Wang 1b4254cee0 ipmi: use correct string length
gcc-8 reports

drivers/char/ipmi/ipmi_msghandler.c: In function
'panic_op_write_handler':
./include/linux/string.h:245:9: warning: '__builtin_strncpy' specified
bound 16 equals destination size [-Wstringop-truncation]

drivers/char/ipmi/ipmi_watchdog.c: In function 'set_param_str':
./include/linux/string.h:245:9: warning: '__builtin_strncpy' specified
bound 16 equals destination size [-Wstringop-truncation]

We need one less byte or call strlcpy() to make it a nul-terminated
string.

Signed-off-by: Xiongfeng Wang <xiongfeng.wang@linaro.org>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-01-08 20:02:47 -06:00
Kees Cook e99e88a9d2 treewide: setup_timer() -> timer_setup()
This converts all remaining cases of the old setup_timer() API into using
timer_setup(), where the callback argument is the structure already
holding the struct timer_list. These should have no behavioral changes,
since they just change which pointer is passed into the callback with
the same available pointers after conversion. It handles the following
examples, in addition to some other variations.

Casting from unsigned long:

    void my_callback(unsigned long data)
    {
        struct something *ptr = (struct something *)data;
    ...
    }
    ...
    setup_timer(&ptr->my_timer, my_callback, ptr);

and forced object casts:

    void my_callback(struct something *ptr)
    {
    ...
    }
    ...
    setup_timer(&ptr->my_timer, my_callback, (unsigned long)ptr);

become:

    void my_callback(struct timer_list *t)
    {
        struct something *ptr = from_timer(ptr, t, my_timer);
    ...
    }
    ...
    timer_setup(&ptr->my_timer, my_callback, 0);

Direct function assignments:

    void my_callback(unsigned long data)
    {
        struct something *ptr = (struct something *)data;
    ...
    }
    ...
    ptr->my_timer.function = my_callback;

have a temporary cast added, along with converting the args:

    void my_callback(struct timer_list *t)
    {
        struct something *ptr = from_timer(ptr, t, my_timer);
    ...
    }
    ...
    ptr->my_timer.function = (TIMER_FUNC_TYPE)my_callback;

And finally, callbacks without a data assignment:

    void my_callback(unsigned long data)
    {
    ...
    }
    ...
    setup_timer(&ptr->my_timer, my_callback, 0);

have their argument renamed to verify they're unused during conversion:

    void my_callback(struct timer_list *unused)
    {
    ...
    }
    ...
    timer_setup(&ptr->my_timer, my_callback, 0);

The conversion is done with the following Coccinelle script:

spatch --very-quiet --all-includes --include-headers \
	-I ./arch/x86/include -I ./arch/x86/include/generated \
	-I ./include -I ./arch/x86/include/uapi \
	-I ./arch/x86/include/generated/uapi -I ./include/uapi \
	-I ./include/generated/uapi --include ./include/linux/kconfig.h \
	--dir . \
	--cocci-file ~/src/data/timer_setup.cocci

@fix_address_of@
expression e;
@@

 setup_timer(
-&(e)
+&e
 , ...)

// Update any raw setup_timer() usages that have a NULL callback, but
// would otherwise match change_timer_function_usage, since the latter
// will update all function assignments done in the face of a NULL
// function initialization in setup_timer().
@change_timer_function_usage_NULL@
expression _E;
identifier _timer;
type _cast_data;
@@

(
-setup_timer(&_E->_timer, NULL, _E);
+timer_setup(&_E->_timer, NULL, 0);
|
-setup_timer(&_E->_timer, NULL, (_cast_data)_E);
+timer_setup(&_E->_timer, NULL, 0);
|
-setup_timer(&_E._timer, NULL, &_E);
+timer_setup(&_E._timer, NULL, 0);
|
-setup_timer(&_E._timer, NULL, (_cast_data)&_E);
+timer_setup(&_E._timer, NULL, 0);
)

@change_timer_function_usage@
expression _E;
identifier _timer;
struct timer_list _stl;
identifier _callback;
type _cast_func, _cast_data;
@@

(
-setup_timer(&_E->_timer, _callback, _E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, &_callback, _E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, _callback, (_cast_data)_E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, &_callback, (_cast_data)_E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, (_cast_func)_callback, _E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, (_cast_func)&_callback, _E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, (_cast_func)_callback, (_cast_data)_E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, (_cast_func)&_callback, (_cast_data)_E);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, (_cast_data)_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, (_cast_data)&_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, &_callback, (_cast_data)_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, &_callback, (_cast_data)&_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, (_cast_func)_callback, (_cast_data)&_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)_E);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, (_cast_func)&_callback, (_cast_data)&_E);
+timer_setup(&_E._timer, _callback, 0);
|
 _E->_timer@_stl.function = _callback;
|
 _E->_timer@_stl.function = &_callback;
|
 _E->_timer@_stl.function = (_cast_func)_callback;
|
 _E->_timer@_stl.function = (_cast_func)&_callback;
|
 _E._timer@_stl.function = _callback;
|
 _E._timer@_stl.function = &_callback;
|
 _E._timer@_stl.function = (_cast_func)_callback;
|
 _E._timer@_stl.function = (_cast_func)&_callback;
)

// callback(unsigned long arg)
@change_callback_handle_cast
 depends on change_timer_function_usage@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._timer;
type _origtype;
identifier _origarg;
type _handletype;
identifier _handle;
@@

 void _callback(
-_origtype _origarg
+struct timer_list *t
 )
 {
(
	... when != _origarg
	_handletype *_handle =
-(_handletype *)_origarg;
+from_timer(_handle, t, _timer);
	... when != _origarg
|
	... when != _origarg
	_handletype *_handle =
-(void *)_origarg;
+from_timer(_handle, t, _timer);
	... when != _origarg
|
	... when != _origarg
	_handletype *_handle;
	... when != _handle
	_handle =
-(_handletype *)_origarg;
+from_timer(_handle, t, _timer);
	... when != _origarg
|
	... when != _origarg
	_handletype *_handle;
	... when != _handle
	_handle =
-(void *)_origarg;
+from_timer(_handle, t, _timer);
	... when != _origarg
)
 }

// callback(unsigned long arg) without existing variable
@change_callback_handle_cast_no_arg
 depends on change_timer_function_usage &&
                     !change_callback_handle_cast@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._timer;
type _origtype;
identifier _origarg;
type _handletype;
@@

 void _callback(
-_origtype _origarg
+struct timer_list *t
 )
 {
+	_handletype *_origarg = from_timer(_origarg, t, _timer);
+
	... when != _origarg
-	(_handletype *)_origarg
+	_origarg
	... when != _origarg
 }

// Avoid already converted callbacks.
@match_callback_converted
 depends on change_timer_function_usage &&
            !change_callback_handle_cast &&
	    !change_callback_handle_cast_no_arg@
identifier change_timer_function_usage._callback;
identifier t;
@@

 void _callback(struct timer_list *t)
 { ... }

// callback(struct something *handle)
@change_callback_handle_arg
 depends on change_timer_function_usage &&
	    !match_callback_converted &&
            !change_callback_handle_cast &&
            !change_callback_handle_cast_no_arg@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._timer;
type _handletype;
identifier _handle;
@@

 void _callback(
-_handletype *_handle
+struct timer_list *t
 )
 {
+	_handletype *_handle = from_timer(_handle, t, _timer);
	...
 }

// If change_callback_handle_arg ran on an empty function, remove
// the added handler.
@unchange_callback_handle_arg
 depends on change_timer_function_usage &&
	    change_callback_handle_arg@
identifier change_timer_function_usage._callback;
identifier change_timer_function_usage._timer;
type _handletype;
identifier _handle;
identifier t;
@@

 void _callback(struct timer_list *t)
 {
-	_handletype *_handle = from_timer(_handle, t, _timer);
 }

// We only want to refactor the setup_timer() data argument if we've found
// the matching callback. This undoes changes in change_timer_function_usage.
@unchange_timer_function_usage
 depends on change_timer_function_usage &&
            !change_callback_handle_cast &&
            !change_callback_handle_cast_no_arg &&
	    !change_callback_handle_arg@
expression change_timer_function_usage._E;
identifier change_timer_function_usage._timer;
identifier change_timer_function_usage._callback;
type change_timer_function_usage._cast_data;
@@

(
-timer_setup(&_E->_timer, _callback, 0);
+setup_timer(&_E->_timer, _callback, (_cast_data)_E);
|
-timer_setup(&_E._timer, _callback, 0);
+setup_timer(&_E._timer, _callback, (_cast_data)&_E);
)

// If we fixed a callback from a .function assignment, fix the
// assignment cast now.
@change_timer_function_assignment
 depends on change_timer_function_usage &&
            (change_callback_handle_cast ||
             change_callback_handle_cast_no_arg ||
             change_callback_handle_arg)@
expression change_timer_function_usage._E;
identifier change_timer_function_usage._timer;
identifier change_timer_function_usage._callback;
type _cast_func;
typedef TIMER_FUNC_TYPE;
@@

(
 _E->_timer.function =
-_callback
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E->_timer.function =
-&_callback
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E->_timer.function =
-(_cast_func)_callback;
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E->_timer.function =
-(_cast_func)&_callback
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E._timer.function =
-_callback
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E._timer.function =
-&_callback;
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E._timer.function =
-(_cast_func)_callback
+(TIMER_FUNC_TYPE)_callback
 ;
|
 _E._timer.function =
-(_cast_func)&_callback
+(TIMER_FUNC_TYPE)_callback
 ;
)

// Sometimes timer functions are called directly. Replace matched args.
@change_timer_function_calls
 depends on change_timer_function_usage &&
            (change_callback_handle_cast ||
             change_callback_handle_cast_no_arg ||
             change_callback_handle_arg)@
expression _E;
identifier change_timer_function_usage._timer;
identifier change_timer_function_usage._callback;
type _cast_data;
@@

 _callback(
(
-(_cast_data)_E
+&_E->_timer
|
-(_cast_data)&_E
+&_E._timer
|
-_E
+&_E->_timer
)
 )

// If a timer has been configured without a data argument, it can be
// converted without regard to the callback argument, since it is unused.
@match_timer_function_unused_data@
expression _E;
identifier _timer;
identifier _callback;
@@

(
-setup_timer(&_E->_timer, _callback, 0);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, _callback, 0L);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E->_timer, _callback, 0UL);
+timer_setup(&_E->_timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, 0);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, 0L);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_E._timer, _callback, 0UL);
+timer_setup(&_E._timer, _callback, 0);
|
-setup_timer(&_timer, _callback, 0);
+timer_setup(&_timer, _callback, 0);
|
-setup_timer(&_timer, _callback, 0L);
+timer_setup(&_timer, _callback, 0);
|
-setup_timer(&_timer, _callback, 0UL);
+timer_setup(&_timer, _callback, 0);
|
-setup_timer(_timer, _callback, 0);
+timer_setup(_timer, _callback, 0);
|
-setup_timer(_timer, _callback, 0L);
+timer_setup(_timer, _callback, 0);
|
-setup_timer(_timer, _callback, 0UL);
+timer_setup(_timer, _callback, 0);
)

@change_callback_unused_data
 depends on match_timer_function_unused_data@
identifier match_timer_function_unused_data._callback;
type _origtype;
identifier _origarg;
@@

 void _callback(
-_origtype _origarg
+struct timer_list *unused
 )
 {
	... when != _origarg
 }

Signed-off-by: Kees Cook <keescook@chromium.org>
2017-11-21 15:57:07 -08:00
Colin Ian King b79bba15b3 ipmi: remove redundant initialization of bmc
The pointer bmc is being initialized and this initialized value is
never being read, so this is assignment redundant and can be removed.
Cleans up clang warning:

warning: Value stored to 'bmc' during its initialization is never read

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-28 12:29:44 -05:00
Corey Minyard 106a846102 ipmi: Clean up some print operations
Get rid of all printfs, using dev_xxx() if a device is available,
pr_xxx() otherwise, and format long strings properly.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-28 12:26:04 -05:00
Corey Minyard 95e300c052 ipmi: Make the DMI probe into a generic platform probe
Rework the DMI probe function to be a generic platform probe, and
then rework the DMI code (and a few other things) to use the more
generic information.  This is so other things can declare platform
IPMI devices.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-28 12:26:03 -05:00
Corey Minyard 55f91cb6f1 ipmi: Make the IPMI proc interface configurable
So we can remove it later.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-28 12:26:03 -05:00
Corey Minyard 3fd32f9ec8 ipmi: Convert IPMI GUID over to Linux guid_t
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27 16:03:45 -05:00
Corey Minyard 31b0b0730a ipmi: Rescan channel list on BMC changes
If the BMC changes versions or a change is otherwise detected,
rescan the channels on the BMC.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27 16:03:45 -05:00
Corey Minyard 5fdb1fb2ab ipmi: Move lun and address out of channel struct
Put it in it's own struct, getting ready for channel information
being dynamically changed.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27 16:03:45 -05:00
Corey Minyard c0734bd594 ipmi: Retry BMC registration on a failure
If the BMC fails to register, just set up to retry periodically.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27 16:03:45 -05:00
Corey Minyard b2cfd8ab4a ipmi: Rework device id and guid handling to catch changing BMCs
A BMC's guid or device id info may change dynamically, this could
result in a different configuration that needs to be done.  Adjust
the BMCs dynamically.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27 16:03:45 -05:00
Corey Minyard c659ff34f6 ipmi: Use a temporary BMC for an interface
This is getting ready for the ability to redo the BMC if it's
information changes, we need a fallback mechanism.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27 16:03:45 -05:00
Corey Minyard 28f26ac7a9 ipmi: Dynamically fetch GUID periodically
This will catch if the GUID changes.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27 16:03:45 -05:00
Corey Minyard 39d3fb4560 ipmi: Always fetch the guid through ipmi_get_device_id()
This is in preparation for making ipmi_get_device_id() dynamically
return the guid and device id.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27 16:03:45 -05:00
Corey Minyard 1e5058ea21 ipmi: Remove the device id from ipmi_register_smi()
It's no longer used, dynamic device id handling is in place now.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27 16:03:45 -05:00
Jeremy Kerr aa9c9ab244 ipmi: allow dynamic BMC version information
Currently, it's up to the IPMI SMIs to provide the product & version
details of BMCs behind registered IPMI SMI interfaces. This device ID is
provided on SMI regsitration, and kept around for all future queries.

However, this version information isn't always static. For example, a
BMC may be upgraded at runtime, making the old version information
stale.

This change allows querying the BMC device ID & version information
dynamically. If no static device_id argument is provided to
ipmi_register_smi, then the IPMI core code will perform a Get Device ID
IPMI command to query the version information when needed. We keep a
short-term cache of this information so we don't need to re-query
for every attribute access.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>

I basically rewrote this, I fixed some locking issues and simplified
things.  Same functional change, though.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27 16:03:45 -05:00
Corey Minyard 68e7e50f19 ipmi: Don't use BMC product/dev ids in the BMC name
There are a lot of bad things that a set of BMCs could do that
would really confuse the IPMI driver; it's possible for BMCs with
different GUIDs to have the same product/devid (though that's
not technically legal), which would result in platform device
namespace collisions.  Fixing it would involve either using
the GUID in the BMC name, which resulted in huge names, or
just using an ida for numbering the BMCs.  The latter approach
was chosen to avoid the huge names.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27 16:03:45 -05:00
Jeremy Kerr a9137c3dfa ipmi: Add a reference from BMC devices to their interfaces
In an upcoming change, we'll want to grab a reference to the ipmi_smi_t
from a struct bmc_device. This change adds a pointer to allow this.

Signed-off-by: Jeremy Kerr <jk@ozlabs.org>

Reworked to support multiple interfaces on a BMC.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27 16:03:45 -05:00
Corey Minyard 511d57dc71 ipmi: Get the device id through a function
This makes getting the device id consistent, and make it possible
to add a function to fetch it dynamically later.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27 16:03:45 -05:00
Corey Minyard 9b64a8ba90 ipmi: Fix printing the BMC guid
It was just wrong.  Make it print according to the guid spec.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27 16:03:45 -05:00
Corey Minyard a2cb600fa2 ipmi: Rework BMC registration
There was a certain error case where the BMC wouldn't be deregistered
like it should be.  Rework the BMC registration to make calling
ipmi_bmc_unregister() ok even if it's not registered and to clean up
the error handling for ipmi_bmc_register().

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27 16:03:45 -05:00
Corey Minyard 9ca15af316 ipmi: Fix issues with BMC refcounts
BMC device refcounts were not being decremented after fetching from
driver_find_device().  Also, document the use of ipmidriver_mutex
and tighten it's span some by incrementing the BMC's usecount in
the BMC find routines and not later.  This will be important for
future changes where a long mutex hold area will complicate things.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27 16:03:45 -05:00
Corey Minyard eae4a36a68 ipmi: Check that the device type is BMC when scanning device
Just an added safety check.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27 16:03:45 -05:00
Corey Minyard f33e4df83e ipmi: Move bmc find routing to below bmc device type
No functional change, this is for a later change that uses the
bmc device type.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27 16:03:45 -05:00
Corey Minyard 72630d9a01 ipmi: Fix getting the GUID data
It was off by one.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27 16:03:45 -05:00
Corey Minyard 1c9f98d1bf ipmi: Make IPMI panic strings always available
They were set by config items, but people complained that they were
never turned on.  So have them always available and enabled by a
module parameter.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-09-27 16:03:45 -05:00
Corey Minyard 392a17b10e ipmi: fix unsigned long underflow
When I set the timeout to a specific value such as 500ms, the timeout
event will not happen in time due to the overflow in function
check_msg_timeout:
...
	ent->timeout -= timeout_period;
	if (ent->timeout > 0)
		return;
...

The type of timeout_period is long, but ent->timeout is unsigned long.
This patch makes the type consistent.

Reported-by: Weilong Chen <chenweilong@huawei.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Tested-by: Weilong Chen <chenweilong@huawei.com>
Cc: <stable@vger.kernel.org> # 3.16.x
2017-09-27 16:03:45 -05:00
Arvind Yadav 1e7a75f74a char: ipmi: constify bmc_dev_attr_group and bmc_device_type
File size before:
   text	   data	    bss	    dec	    hex	filename
  25678	   1024	     92	  26794	   68aa	drivers/char/ipmi/ipmi_msghandler.o

File size After adding 'const':
   text	   data	    bss	    dec	    hex	filename
  25806	    896	     92	  26794	   68aa	drivers/char/ipmi/ipmi_msghandler.o

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-06-28 20:56:36 -05:00
Tony Camuso cdea46566b ipmi: use rcu lock around call to intf->handlers->sender()
A vendor with a system having more than 128 CPUs occasionally encounters
the following crash during shutdown. This is not an easily reproduceable
event, but the vendor was able to provide the following analysis of the
crash, which exhibits the same footprint each time.

crash> bt
PID: 0      TASK: ffff88017c70ce70  CPU: 5   COMMAND: "swapper/5"
 #0 [ffff88085c143ac8] machine_kexec at ffffffff81059c8b
 #1 [ffff88085c143b28] __crash_kexec at ffffffff811052e2
 #2 [ffff88085c143bf8] crash_kexec at ffffffff811053d0
 #3 [ffff88085c143c10] oops_end at ffffffff8168ef88
 #4 [ffff88085c143c38] no_context at ffffffff8167ebb3
 #5 [ffff88085c143c88] __bad_area_nosemaphore at ffffffff8167ec49
 #6 [ffff88085c143cd0] bad_area_nosemaphore at ffffffff8167edb3
 #7 [ffff88085c143ce0] __do_page_fault at ffffffff81691d1e
 #8 [ffff88085c143d40] do_page_fault at ffffffff81691ec5
 #9 [ffff88085c143d70] page_fault at ffffffff8168e188
    [exception RIP: unknown or invalid address]
    RIP: ffffffffa053c800  RSP: ffff88085c143e28  RFLAGS: 00010206
    RAX: ffff88017c72bfd8  RBX: ffff88017a8dc000  RCX: ffff8810588b5ac8
    RDX: ffff8810588b5a00  RSI: ffffffffa053c800  RDI: ffff8810588b5a00
    RBP: ffff88085c143e58   R8: ffff88017c70d408   R9: ffff88017a8dc000
    R10: 0000000000000002  R11: ffff88085c143da0  R12: ffff8810588b5ac8
    R13: 0000000000000100  R14: ffffffffa053c800  R15: ffff8810588b5a00
    ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
    <IRQ stack>
    [exception RIP: cpuidle_enter_state+82]
    RIP: ffffffff81514192  RSP: ffff88017c72be50  RFLAGS: 00000202
    RAX: 0000001e4c3c6f16  RBX: 000000000000f8a0  RCX: 0000000000000018
    RDX: 0000000225c17d03  RSI: ffff88017c72bfd8  RDI: 0000001e4c3c6f16
    RBP: ffff88017c72be78   R8: 000000000000237e   R9: 0000000000000018
    R10: 0000000000002494  R11: 0000000000000001  R12: ffff88017c72be20
    R13: ffff88085c14f8e0  R14: 0000000000000082  R15: 0000001e4c3bb400
    ORIG_RAX: ffffffffffffff10  CS: 0010  SS: 0018

This is the corresponding stack trace

It has crashed because the area pointed with RIP extracted from timer
element is already removed during a shutdown process.

The function is smi_timeout().

And we think ffff8810588b5a00 in RDX is a parameter struct smi_info

crash> rd ffff8810588b5a00 20
ffff8810588b5a00:  ffff8810588b6000 0000000000000000   .`.X............
ffff8810588b5a10:  ffff880853264400 ffffffffa05417e0   .D&S......T.....
ffff8810588b5a20:  24a024a000000000 0000000000000000   .....$.$........
ffff8810588b5a30:  0000000000000000 0000000000000000   ................
ffff8810588b5a30:  0000000000000000 0000000000000000   ................
ffff8810588b5a40:  ffffffffa053a040 ffffffffa053a060   @.S.....`.S.....
ffff8810588b5a50:  0000000000000000 0000000100000001   ................
ffff8810588b5a60:  0000000000000000 0000000000000e00   ................
ffff8810588b5a70:  ffffffffa053a580 ffffffffa053a6e0   ..S.......S.....
ffff8810588b5a80:  ffffffffa053a4a0 ffffffffa053a250   ..S.....P.S.....
ffff8810588b5a90:  0000000500000002 0000000000000000   ................

Unfortunately the top of this area is already detroyed by someone.
But because of two reasonns we think this is struct smi_info
 1) The address included in between  ffff8810588b5a70 and ffff8810588b5a80:
  are inside of ipmi_si_intf.c  see crash> module ffff88085779d2c0

 2) We've found the area which point this.
  It is offset 0x68 of  ffff880859df4000

crash> rd  ffff880859df4000 100
ffff880859df4000:  0000000000000000 0000000000000001   ................
ffff880859df4010:  ffffffffa0535290 dead000000000200   .RS.............
ffff880859df4020:  ffff880859df4020 ffff880859df4020    @.Y.... @.Y....
ffff880859df4030:  0000000000000002 0000000000100010   ................
ffff880859df4040:  ffff880859df4040 ffff880859df4040   @@.Y....@@.Y....
ffff880859df4050:  0000000000000000 0000000000000000   ................
ffff880859df4060:  0000000000000000 ffff8810588b5a00   .........Z.X....
ffff880859df4070:  0000000000000001 ffff880859df4078   ........x@.Y....

 If we regards it as struct ipmi_smi in shutdown process
 it looks consistent.

The remedy for this apparent race is affixed below.

Signed-off-by: Tony Camuso <tcamuso@redhat.com>
Cc: stable@vger.kernel.org # 3.19

This was first introduced in 7ea0ed2b5b ipmi: Make the
message handler easier to use for SMI interfaces
where some code was moved outside of the rcu_read_lock()
and the lock was not added.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-06-19 12:49:34 -05:00
Corey Minyard 210af2a5f1 ipmi: make ipmi_usr_hndl const
It's only function pointers.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
2017-01-05 15:01:55 -06:00