Граф коммитов

62709 Коммитов

Автор SHA1 Сообщение Дата
Eric Biggers 23224e4500 mm: remove kzfree() compatibility definition
Commit 453431a549 ("mm, treewide: rename kzfree() to
kfree_sensitive()") renamed kzfree() to kfree_sensitive(),
but it left a compatibility definition of kzfree() to avoid
being too disruptive.

Since then a few more instances of kzfree() have slipped in.

Just get rid of them and remove the compatibility definition
once and for all.

Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-10-25 11:39:02 -07:00
Willy Tarreau 3744741ada random32: add noise from network and scheduling activity
With the removal of the interrupt perturbations in previous random32
change (random32: make prandom_u32() output unpredictable), the PRNG
has become 100% deterministic again. While SipHash is expected to be
way more robust against brute force than the previous Tausworthe LFSR,
there's still the risk that whoever has even one temporary access to
the PRNG's internal state is able to predict all subsequent draws till
the next reseed (roughly every minute). This may happen through a side
channel attack or any data leak.

This patch restores the spirit of commit f227e3ec3b ("random32: update
the net random state on interrupt and activity") in that it will perturb
the internal PRNG's statee using externally collected noise, except that
it will not pick that noise from the random pool's bits nor upon
interrupt, but will rather combine a few elements along the Tx path
that are collectively hard to predict, such as dev, skb and txq
pointers, packet length and jiffies values. These ones are combined
using a single round of SipHash into a single long variable that is
mixed with the net_rand_state upon each invocation.

The operation was inlined because it produces very small and efficient
code, typically 3 xor, 2 add and 2 rol. The performance was measured
to be the same (even very slightly better) than before the switch to
SipHash; on a 6-core 12-thread Core i7-8700k equipped with a 40G NIC
(i40e), the connection rate dropped from 556k/s to 555k/s while the
SYN cookie rate grew from 5.38 Mpps to 5.45 Mpps.

Link: https://lore.kernel.org/netdev/20200808152628.GA27941@SDF.ORG/
Cc: George Spelvin <lkml@sdf.org>
Cc: Amit Klein <aksecurity@gmail.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "Jason A. Donenfeld" <Jason@zx2c4.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: tytso@mit.edu
Cc: Florian Westphal <fw@strlen.de>
Cc: Marc Plumb <lkml.mplumb@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
2020-10-24 20:21:57 +02:00
Linus Torvalds 3cb12d27ff Fixes for 5.10-rc1 from the networking tree:
Cross-tree/merge window issues:
 
  - rtl8150: don't incorrectly assign random MAC addresses; fix late
    in the 5.9 cycle started depending on a return code from
    a function which changed with the 5.10 PR from the usb subsystem
 
 Current release - regressions:
 
  - Revert "virtio-net: ethtool configurable RXCSUM", it was causing
    crashes at probe when control vq was not negotiated/available
 
 Previous releases - regressions:
 
  - ixgbe: fix probing of multi-port 10 Gigabit Intel NICs with an MDIO
    bus, only first device would be probed correctly
 
  - nexthop: Fix performance regression in nexthop deletion by
    effectively switching from recently added synchronize_rcu()
    to synchronize_rcu_expedited()
 
  - netsec: ignore 'phy-mode' device property on ACPI systems;
    the property is not populated correctly by the firmware,
    but firmware configures the PHY so just keep boot settings
 
 Previous releases - always broken:
 
  - tcp: fix to update snd_wl1 in bulk receiver fast path, addressing
    bulk transfers getting "stuck"
 
  - icmp: randomize the global rate limiter to prevent attackers from
    getting useful signal
 
  - r8169: fix operation under forced interrupt threading, make the
    driver always use hard irqs, even on RT, given the handler is
    light and only wants to schedule napi (and do so through
    a _irqoff() variant, preferably)
 
  - bpf: Enforce pointer id generation for all may-be-null register
    type to avoid pointers erroneously getting marked as null-checked
 
  - tipc: re-configure queue limit for broadcast link
 
  - net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN
    tunnels
 
  - fix various issues in chelsio inline tls driver
 
 Misc:
 
  - bpf: improve just-added bpf_redirect_neigh() helper api to support
    supplying nexthop by the caller - in case BPF program has already
    done a lookup we can avoid doing another one
 
  - remove unnecessary break statements
 
  - make MCTCP not select IPV6, but rather depend on it
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAl+R+5UACgkQMUZtbf5S
 Irt9KxAAiYme2aSvMOni0NQsOgQ5mVsy7tk0/4dyRqkAx0ggrfGcFuhgZYNm8ZKY
 KoQsQyn30Wb/2wAp1vX2I4Fod67rFyBfQg/8iWiEAu47X7Bj1lpPPJexSPKhF9/X
 e0TuGxZtoaDuV9C3Su/FOjRmnShGSFQu1SCyJThshwaGsFL3YQ0Ut07VRgRF8x05
 A5fy2SVVIw0JOQgV1oH0GP5oEK3c50oGnaXt8emm56PxVIfAYY0oq69hQUzrfMFP
 zV9R0XbnbCIibT8R3lEghjtXavtQTzK5rYDKazTeOyDU87M+yuykNYj7MhgDwl9Q
 UdJkH2OpMlJylEH3asUjz/+ObMhXfOuj/ZS3INtO5omBJx7x76egDZPMQe4wlpcC
 NT5EZMS7kBdQL8xXDob7hXsvFpuEErSUGruYTHp4H52A9ke1dRTH2kQszcKk87V3
 s+aVVPtJ5bHzF3oGEvfwP0DFLTF6WvjD0Ts0LmTY2DhpE//tFWV37j60Ni5XU21X
 fCPooihQbLOsq9D8zc0ydEvCg2LLWMXM5ovCkqfIAJzbGVYhnxJSryZwpOlKDS0y
 LiUmLcTZDoNR/szx0aJhVHdUUVgXDX/GsllHoc1w7ZvDRMJn40K+xnaF3dSMwtIl
 imhfc5pPi6fdBgjB0cFYRPfhwiwlPMQ4YFsOq9JvynJzmt6P5FQ=
 =ceke
 -----END PGP SIGNATURE-----

Merge tag 'net-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from Jakub Kicinski:
 "Cross-tree/merge window issues:

   - rtl8150: don't incorrectly assign random MAC addresses; fix late in
     the 5.9 cycle started depending on a return code from a function
     which changed with the 5.10 PR from the usb subsystem

  Current release regressions:

   - Revert "virtio-net: ethtool configurable RXCSUM", it was causing
     crashes at probe when control vq was not negotiated/available

  Previous release regressions:

   - ixgbe: fix probing of multi-port 10 Gigabit Intel NICs with an MDIO
     bus, only first device would be probed correctly

   - nexthop: Fix performance regression in nexthop deletion by
     effectively switching from recently added synchronize_rcu() to
     synchronize_rcu_expedited()

   - netsec: ignore 'phy-mode' device property on ACPI systems; the
     property is not populated correctly by the firmware, but firmware
     configures the PHY so just keep boot settings

  Previous releases - always broken:

   - tcp: fix to update snd_wl1 in bulk receiver fast path, addressing
     bulk transfers getting "stuck"

   - icmp: randomize the global rate limiter to prevent attackers from
     getting useful signal

   - r8169: fix operation under forced interrupt threading, make the
     driver always use hard irqs, even on RT, given the handler is light
     and only wants to schedule napi (and do so through a _irqoff()
     variant, preferably)

   - bpf: Enforce pointer id generation for all may-be-null register
     type to avoid pointers erroneously getting marked as null-checked

   - tipc: re-configure queue limit for broadcast link

   - net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN
     tunnels

   - fix various issues in chelsio inline tls driver

  Misc:

   - bpf: improve just-added bpf_redirect_neigh() helper api to support
     supplying nexthop by the caller - in case BPF program has already
     done a lookup we can avoid doing another one

   - remove unnecessary break statements

   - make MCTCP not select IPV6, but rather depend on it"

* tag 'net-5.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
  tcp: fix to update snd_wl1 in bulk receiver fast path
  net: Properly typecast int values to set sk_max_pacing_rate
  netfilter: nf_fwd_netdev: clear timestamp in forwarding path
  ibmvnic: save changed mac address to adapter->mac_addr
  selftests: mptcp: depends on built-in IPv6
  Revert "virtio-net: ethtool configurable RXCSUM"
  rtnetlink: fix data overflow in rtnl_calcit()
  net: ethernet: mtk-star-emac: select REGMAP_MMIO
  net: hdlc_raw_eth: Clear the IFF_TX_SKB_SHARING flag after calling ether_setup
  net: hdlc: In hdlc_rcv, check to make sure dev is an HDLC device
  bpf, libbpf: Guard bpf inline asm from bpf_tail_call_static
  bpf, selftests: Extend test_tc_redirect to use modified bpf_redirect_neigh()
  bpf: Fix bpf_redirect_neigh helper api to support supplying nexthop
  mptcp: depends on IPV6 but not as a module
  sfc: move initialisation of efx->filter_sem to efx_init_struct()
  mpls: load mpls_gso after mpls_iptunnel
  net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN tunnels
  net/sched: act_gate: Unlock ->tcfa_lock in tc_setup_flow_action()
  net: dsa: bcm_sf2: make const array static, makes object smaller
  mptcp: MPTCP_IPV6 should depend on IPV6 instead of selecting it
  ...
2020-10-23 12:05:49 -07:00
Neal Cardwell 18ded910b5 tcp: fix to update snd_wl1 in bulk receiver fast path
In the header prediction fast path for a bulk data receiver, if no
data is newly acknowledged then we do not call tcp_ack() and do not
call tcp_ack_update_window(). This means that a bulk receiver that
receives large amounts of data can have the incoming sequence numbers
wrap, so that the check in tcp_may_update_window fails:
   after(ack_seq, tp->snd_wl1)

If the incoming receive windows are zero in this state, and then the
connection that was a bulk data receiver later wants to send data,
that connection can find itself persistently rejecting the window
updates in incoming ACKs. This means the connection can persistently
fail to discover that the receive window has opened, which in turn
means that the connection is unable to send anything, and the
connection's sending process can get permanently "stuck".

The fix is to update snd_wl1 in the header prediction fast path for a
bulk data receiver, so that it keeps up and does not see wrapping
problems.

This fix is based on a very nice and thorough analysis and diagnosis
by Apollon Oikonomopoulos (see link below).

This is a stable candidate but there is no Fixes tag here since the
bug predates current git history. Just for fun: looks like the bug
dates back to when header prediction was added in Linux v2.1.8 in Nov
1996. In that version tcp_rcv_established() was added, and the code
only updates snd_wl1 in tcp_ack(), and in the new "Bulk data transfer:
receiver" code path it does not call tcp_ack(). This fix seems to
apply cleanly at least as far back as v3.2.

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Reported-by: Apollon Oikonomopoulos <apoikos@dmesg.gr>
Tested-by: Apollon Oikonomopoulos <apoikos@dmesg.gr>
Link: https://www.spinics.net/lists/netdev/msg692430.html
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Acked-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20201022143331.1887495-1-ncardwell.kernel@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-22 12:26:57 -07:00
Ke Li 700465fd33 net: Properly typecast int values to set sk_max_pacing_rate
In setsockopt(SO_MAX_PACING_RATE) on 64bit systems, sk_max_pacing_rate,
after extended from 'u32' to 'unsigned long', takes unintentionally
hiked value whenever assigned from an 'int' value with MSB=1, due to
binary sign extension in promoting s32 to u64, e.g. 0x80000000 becomes
0xFFFFFFFF80000000.

Thus inflated sk_max_pacing_rate causes subsequent getsockopt to return
~0U unexpectedly. It may also result in increased pacing rate.

Fix by explicitly casting the 'int' value to 'unsigned int' before
assigning it to sk_max_pacing_rate, for zero extension to happen.

Fixes: 76a9ebe811 ("net: extend sk_pacing_rate to unsigned long")
Signed-off-by: Ji Li <jli@akamai.com>
Signed-off-by: Ke Li <keli@akamai.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20201022064146.79873-1-keli@akamai.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-22 12:18:25 -07:00
Jakub Kicinski 594850ca43 Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:

====================
Netfilter fixes for net

1) Update debugging in IPVS tcp protocol handler to make it easier
   to understand, from longguang.yue

2) Update TCP tracker to deal with keepalive packet after
   re-registration, from Franceso Ruggeri.

3) Missing IP6SKB_FRAGMENTED from netfilter fragment reassembly,
   from Georg Kohmann.

4) Fix bogus packet drop in ebtables nat extensions, from
   Thimothee Cocault.

5) Fix typo in flowtable documentation.

6) Reset skb timestamp in nft_fwd_netdev.
====================

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-22 12:00:37 -07:00
Jakub Kicinski d2775984d0 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says:

====================
pull-request: bpf 2020-10-22

1) Fix enforcing NULL check in verifier for new helper return types of
   RET_PTR_TO_{BTF_ID,MEM_OR_BTF_ID}_OR_NULL, from Martin KaFai Lau.

2) Fix bpf_redirect_neigh() helper API before it becomes frozen by adding
   nexthop information as argument, from Toke Høiland-Jørgensen.

3) Guard & fix compilation of bpf_tail_call_static() when __bpf__ arch is
   not defined by compiler or clang too old, from Daniel Borkmann.

4) Remove misplaced break after return in attach_type_to_prog_type(), from
   Tom Rix.
====================

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-22 09:51:41 -07:00
Linus Torvalds 24717cfbbb The one new feature this time, from Anna Schumaker, is READ_PLUS, which
has the same arguments as READ but allows the server to return an array
 of data and hole extents.
 
 Otherwise it's a lot of cleanup and bugfixes.
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCAAzFiEEYtFWavXG9hZotryuJ5vNeUKO4b4FAl+Q5vsVHGJmaWVsZHNA
 ZmllbGRzZXMub3JnAAoJECebzXlCjuG+DUAP/RlALnXbaoWi8YCcEcc9U1LoQKbD
 CJpDR+FqCOyGwRuzWung/5pvkOO50fGEeAroos+2rF/NgRkQq8EFr9AuBhNOYUFE
 IZhWEOfu/r2ukXyBmcu21HGcWLwPnyJehvjuzTQW2wOHlBi/sdoL5Ap1sVlwVLj5
 EZ5kqJLD+ioG2sufW99Spi55l1Cy+3Y0IhLSWl4ZAE6s8hmFSYAJZFsOeI0Afx57
 USPTDRaeqjyEULkb+f8IhD0eRApOUo4evDn9dwQx+of7HPa1CiygctTKYwA3hnlc
 gXp2KpVA1REaiYVgOPwYlnqBmJ2K9X0wCRzcWy2razqEcVAX/2j7QCe9M2mn4DC8
 xZ2q4SxgXu9yf0qfUSVnDxWmP6ipqq7OmsG0JXTFseGKBdpjJY1qHhyqanVAGvEg
 I+xHnnWfGwNCftwyA3mt3RfSFPsbLlSBIMZxvN4kn8aVlqszGITOQvTdQcLYA6kT
 xWllBf4XKVXMqF0PzerxPDmfzBfhx6b1VPWOIVcu7VLBg3IXoEB2G5xG8MUJiSch
 OUTCt41LUQkerQlnzaZYqwmFdSBfXJefmcE/x/vps4VtQ/fPHX1jQyD7iTu3HfSP
 bRlkKHvNVeTodlBDe/HTPiTA99MShhBJyvtV5wfzIqwjc1cNreed+ePppxn8mxJi
 SmQ2uZk/MpUl7/V0
 =rcOj
 -----END PGP SIGNATURE-----

Merge tag 'nfsd-5.10' of git://linux-nfs.org/~bfields/linux

Pull nfsd updates from Bruce Fields:
 "The one new feature this time, from Anna Schumaker, is READ_PLUS,
  which has the same arguments as READ but allows the server to return
  an array of data and hole extents.

  Otherwise it's a lot of cleanup and bugfixes"

* tag 'nfsd-5.10' of git://linux-nfs.org/~bfields/linux: (43 commits)
  NFSv4.2: Fix NFS4ERR_STALE error when doing inter server copy
  SUNRPC: fix copying of multiple pages in gss_read_proxy_verf()
  sunrpc: raise kernel RPC channel buffer size
  svcrdma: fix bounce buffers for unaligned offsets and multiple pages
  nfsd: remove unneeded break
  net/sunrpc: Fix return value for sysctl sunrpc.transports
  NFSD: Encode a full READ_PLUS reply
  NFSD: Return both a hole and a data segment
  NFSD: Add READ_PLUS hole segment encoding
  NFSD: Add READ_PLUS data support
  NFSD: Hoist status code encoding into XDR encoder functions
  NFSD: Map nfserr_wrongsec outside of nfsd_dispatch
  NFSD: Remove the RETURN_STATUS() macro
  NFSD: Call NFSv2 encoders on error returns
  NFSD: Fix .pc_release method for NFSv2
  NFSD: Remove vestigial typedefs
  NFSD: Refactor nfsd_dispatch() error paths
  NFSD: Clean up nfsd_dispatch() variables
  NFSD: Clean up stale comments in nfsd_dispatch()
  NFSD: Clean up switch statement in nfsd_dispatch()
  ...
2020-10-22 09:44:27 -07:00
Linus Torvalds 334d431f65 9p pull request for inclusion in 5.10
A couple of small fixes (loff_t overflow on 32bit, syzbot uninitialized
 variable warning) and code cleanup (xen)
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE/IPbcYBuWt0zoYhOq06b7GqY5nAFAl+Rc/EACgkQq06b7GqY
 5nACqxAAnrPj6uA4IQGCQCbRKetkidZrIGre/8RyEAyfxj+8gV0POYp/1SFokAu+
 RzNkeDgKXkV8L/6BEc/XTi/Iy2HGlPOQLjpBcDLwOIe+ZSlXYK544zUqs20W8/ZH
 NHtUY9rvgEWaTyYCi0wjS51xqBs2/Km4OIUKj7OZHXx9rWmpPX/6xwgcR4tNAWEJ
 7AYkq9G0OiDbY9TaHRK0dOmVq1Xs+H3s5Ci4FMh/uFcQBI3UgfpYAegqTiMh8/AF
 aWgtMdidHaBIWdzb1W4UbBXVd14dFfcIqMTzstFO+mElO4VtQCAQtC16cJX9Dqgh
 2YQxZgF5uVAi3DogHLDT0iT6RiqJrU8WeDLfOq8AuOy29l5jlGB6y1GppmS4z0DK
 sw+fy0lMH9q2ahbJs3RMk05m9vK8L9HCjqnMbTD0TohtkEEWyhHJ2RadtkDnRAL+
 Vy+tlfENloVW4zJIFT8RI5pLXqLG4NGV5Tlp5D//5abV1V8uEeVFHe97JTBMsafi
 FAGWqghPPxRB7UhtbnNHiIGDClOctT9y+SY0mxIkq0Bw+26K5G/eXWwF+Wgelfrs
 n0nCrbi5rVdJJhcrZid4r/tUDpXydxgQmrXV8jsgpHH22B02WXKtAzcgWJsB9vec
 syicGh9Shr4cF1S0Rq/Brgl47WGwHjufsvWSwnukvZ1+X4Rs9Qw=
 =ONeq
 -----END PGP SIGNATURE-----

Merge tag '9p-for-5.10-rc1' of git://github.com/martinetd/linux

Pull 9p updates from Dominique Martinet:
 "A couple of small fixes (loff_t overflow on 32bit, syzbot
  uninitialized variable warning) and code cleanup (xen)"

* tag '9p-for-5.10-rc1' of git://github.com/martinetd/linux:
  net: 9p: initialize sun_server.sun_path to have addr's value only when addr is valid
  9p/xen: Fix format argument warning
  9P: Cast to loff_t before multiplying
2020-10-22 09:33:20 -07:00
Pablo Neira Ayuso c77761c8a5 netfilter: nf_fwd_netdev: clear timestamp in forwarding path
Similar to 7980d2eabd ("ipvs: clear skb->tstamp in forwarding path").
fq qdisc requires tstamp to be cleared in forwarding path.

Fixes: 8203e2d844 ("net: clear skb->tstamp in forwarding paths")
Fixes: fb420d5d91 ("tcp/fq: move back to CLOCK_MONOTONIC")
Fixes: 80b14dee2b ("net: Add a new socket option for a future transmit time.")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-10-22 14:49:36 +02:00
Di Zhu ebfe3c5183 rtnetlink: fix data overflow in rtnl_calcit()
"ip addr show" command execute error when we have a physical
network card with a large number of VFs

The return value of if_nlmsg_size() in rtnl_calcit() will exceed
range of u16 data type when any network cards has a larger number of
VFs. rtnl_vfinfo_size() will significant increase needed dump size when
the value of num_vfs is larger.

Eventually we get a wrong value of min_ifinfo_dump_size because of overflow
which decides the memory size needed by netlink dump and netlink_dump()
will return -EMSGSIZE because of not enough memory was allocated.

So fix it by promoting  min_dump_alloc data type to u32 to
avoid whole netlink message size overflow and it's also align
with the data type of struct netlink_callback{}.min_dump_alloc
which is assigned by return value of rtnl_calcit()

Signed-off-by: Di Zhu <zhudi21@huawei.com>
Link: https://lore.kernel.org/r/20201021020053.1401-1-zhudi21@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-21 18:24:08 -07:00
Toke Høiland-Jørgensen ba452c9e99 bpf: Fix bpf_redirect_neigh helper api to support supplying nexthop
Based on the discussion in [0], update the bpf_redirect_neigh() helper to
accept an optional parameter specifying the nexthop information. This makes
it possible to combine bpf_fib_lookup() and bpf_redirect_neigh() without
incurring a duplicate FIB lookup - since the FIB lookup helper will return
the nexthop information even if no neighbour is present, this can simply
be passed on to bpf_redirect_neigh() if bpf_fib_lookup() returns
BPF_FIB_LKUP_RET_NO_NEIGH. Thus fix & extend it before helper API is frozen.

  [0] https://lore.kernel.org/bpf/393e17fc-d187-3a8d-2f0d-a627c7c63fca@iogearbox.net/

Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/bpf/160322915615.32199.1187570224032024535.stgit@toke.dk
2020-10-22 01:28:54 +02:00
Linus Torvalds ed7cfefe44 We have:
- a patch that removes crush_workspace_mutex (myself).  CRUSH
   computations are no longer serialized and can run in parallel.
 
 - a couple new filesystem client metrics for "ceph fs top" command
   (Xiubo Li)
 
 - a fix for a very old messenger bug that affected the filesystem,
   marked for stable (myself)
 
 - assorted fixups and cleanups throughout the codebase from Jeff
   and others.
 -----BEGIN PGP SIGNATURE-----
 
 iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAl+QN8cTHGlkcnlvbW92
 QGdtYWlsLmNvbQAKCRBKf944AhHzi4iwCACLwUvO0ONTzUUb2D8ftfyXjo/jIod5
 eO7RHfCHOP2A83GQpdYdktVDSVeOUIOiPhxAxo1dL4GieI2/saXrnoevam7ogZkA
 OmR4drdtRVUqF/aATrtjiDMg2ge0dnx5gfjMxSP/FiPPpXOdrtxng/7tv8yo+03q
 AlMqg/YcxO06t1M1qh9SEyfzjcHyPnJU2i0ienngxnGxQ7QiMOR6anF1LNhtN803
 4fTBX2tLqDNAa+x5yF1kKSn9OmFNhc0oUsqef+Ck0Vw1LC0/SuxzE2J904iehAwy
 /HzJCer0zcp+eZhn3HhoHmp0UZpOC1dzMxa3CHyRJFrxCSTEhY8iqPiJ
 =wGr7
 -----END PGP SIGNATURE-----

Merge tag 'ceph-for-5.10-rc1' of git://github.com/ceph/ceph-client

Pull ceph updates from Ilya Dryomov:

 - a patch that removes crush_workspace_mutex (myself). CRUSH
   computations are no longer serialized and can run in parallel.

 - a couple new filesystem client metrics for "ceph fs top" command
   (Xiubo Li)

 - a fix for a very old messenger bug that affected the filesystem,
   marked for stable (myself)

 - assorted fixups and cleanups throughout the codebase from Jeff and
   others.

* tag 'ceph-for-5.10-rc1' of git://github.com/ceph/ceph-client: (27 commits)
  libceph: clear con->out_msg on Policy::stateful_server faults
  libceph: format ceph_entity_addr nonces as unsigned
  libceph: fix ENTITY_NAME format suggestion
  libceph: move a dout in queue_con_delay()
  ceph: comment cleanups and clarifications
  ceph: break up send_cap_msg
  ceph: drop separate mdsc argument from __send_cap
  ceph: promote to unsigned long long before shifting
  ceph: don't SetPageError on readpage errors
  ceph: mark ceph_fmt_xattr() as printf-like for better type checking
  ceph: fold ceph_update_writeable_page into ceph_write_begin
  ceph: fold ceph_sync_writepages into writepage_nounlock
  ceph: fold ceph_sync_readpages into ceph_readpage
  ceph: don't call ceph_update_writeable_page from page_mkwrite
  ceph: break out writeback of incompatible snap context to separate function
  ceph: add a note explaining session reject error string
  libceph: switch to the new "osd blocklist add" command
  libceph, rbd, ceph: "blacklist" -> "blocklist"
  ceph: have ceph_writepages_start call pagevec_lookup_range_tag
  ceph: use kill_anon_super helper
  ...
2020-10-21 10:34:10 -07:00
Matthieu Baerts 0ed37ac586 mptcp: depends on IPV6 but not as a module
Like TCP, MPTCP cannot be compiled as a module. Obviously, MPTCP IPv6'
support also depends on CONFIG_IPV6. But not all functions from IPv6
code are exported.

To simplify the code and reduce modifications outside MPTCP, it was
decided from the beginning to support MPTCP with IPv6 only if
CONFIG_IPV6 was built inlined. That's also why CONFIG_MPTCP_IPV6 was
created. More modifications are needed to support CONFIG_IPV6=m.

Even if it was not explicit, until recently, we were forcing CONFIG_IPV6
to be built-in because we had "select IPV6" in Kconfig. Now that we have
"depends on IPV6", we have to explicitly set "IPV6=y" to force
CONFIG_IPV6 not to be built as a module.

In other words, we can now only have CONFIG_MPTCP_IPV6=y if
CONFIG_IPV6=y.

Note that the new dependency might hide the fact IPv6 is not supported
in MPTCP even if we have CONFIG_IPV6=m. But selecting IPV6 like we did
before was forcing it to be built-in while it was maybe not what the
user wants.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Fixes: 010b430d5d ("mptcp: MPTCP_IPV6 should depend on IPV6 instead of selecting it")
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20201021105154.628257-1-matthieu.baerts@tessares.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-21 08:05:40 -07:00
Alexander Ovechkin b7c24497ba mpls: load mpls_gso after mpls_iptunnel
mpls_iptunnel is used only for mpls encapsuation, and if encaplusated
packet is larger than MTU we need mpls_gso for segmentation.

Signed-off-by: Alexander Ovechkin <ovov@yandex-team.ru>
Acked-by: Dmitry Yakunin <zeil@yandex-team.ru>
Reviewed-by: David Ahern <dsahern@gmail.com>
Link: https://lore.kernel.org/r/20201020114333.26866-1-ovov@yandex-team.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-20 21:16:45 -07:00
Davide Caratti a7a12b5a0f net/sched: act_tunnel_key: fix OOB write in case of IPv6 ERSPAN tunnels
the following command

 # tc action add action tunnel_key \
 > set src_ip 2001:db8::1 dst_ip 2001:db8::2 id 10 erspan_opts 1:6789:0:0

generates the following splat:

 BUG: KASAN: slab-out-of-bounds in tunnel_key_copy_opts+0xcc9/0x1010 [act_tunnel_key]
 Write of size 4 at addr ffff88813f5f1cc8 by task tc/873

 CPU: 2 PID: 873 Comm: tc Not tainted 5.9.0+ #282
 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014
 Call Trace:
  dump_stack+0x99/0xcb
  print_address_description.constprop.7+0x1e/0x230
  kasan_report.cold.13+0x37/0x7c
  tunnel_key_copy_opts+0xcc9/0x1010 [act_tunnel_key]
  tunnel_key_init+0x160c/0x1f40 [act_tunnel_key]
  tcf_action_init_1+0x5b5/0x850
  tcf_action_init+0x15d/0x370
  tcf_action_add+0xd9/0x2f0
  tc_ctl_action+0x29b/0x3a0
  rtnetlink_rcv_msg+0x341/0x8d0
  netlink_rcv_skb+0x120/0x380
  netlink_unicast+0x439/0x630
  netlink_sendmsg+0x719/0xbf0
  sock_sendmsg+0xe2/0x110
  ____sys_sendmsg+0x5ba/0x890
  ___sys_sendmsg+0xe9/0x160
  __sys_sendmsg+0xd3/0x170
  do_syscall_64+0x33/0x40
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
 RIP: 0033:0x7f872a96b338
 Code: 89 02 48 c7 c0 ff ff ff ff eb b5 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 25 43 2c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 41 89 d4 55
 RSP: 002b:00007ffffe367518 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
 RAX: ffffffffffffffda RBX: 000000005f8f5aed RCX: 00007f872a96b338
 RDX: 0000000000000000 RSI: 00007ffffe367580 RDI: 0000000000000003
 RBP: 0000000000000000 R08: 0000000000000001 R09: 000000000000001c
 R10: 000000000000000b R11: 0000000000000246 R12: 0000000000000001
 R13: 0000000000686760 R14: 0000000000000601 R15: 0000000000000000

 Allocated by task 873:
  kasan_save_stack+0x19/0x40
  __kasan_kmalloc.constprop.7+0xc1/0xd0
  __kmalloc+0x151/0x310
  metadata_dst_alloc+0x20/0x40
  tunnel_key_init+0xfff/0x1f40 [act_tunnel_key]
  tcf_action_init_1+0x5b5/0x850
  tcf_action_init+0x15d/0x370
  tcf_action_add+0xd9/0x2f0
  tc_ctl_action+0x29b/0x3a0
  rtnetlink_rcv_msg+0x341/0x8d0
  netlink_rcv_skb+0x120/0x380
  netlink_unicast+0x439/0x630
  netlink_sendmsg+0x719/0xbf0
  sock_sendmsg+0xe2/0x110
  ____sys_sendmsg+0x5ba/0x890
  ___sys_sendmsg+0xe9/0x160
  __sys_sendmsg+0xd3/0x170
  do_syscall_64+0x33/0x40
  entry_SYSCALL_64_after_hwframe+0x44/0xa9

 The buggy address belongs to the object at ffff88813f5f1c00
  which belongs to the cache kmalloc-256 of size 256
 The buggy address is located 200 bytes inside of
  256-byte region [ffff88813f5f1c00, ffff88813f5f1d00)
 The buggy address belongs to the page:
 page:0000000011b48a19 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x13f5f0
 head:0000000011b48a19 order:1 compound_mapcount:0
 flags: 0x17ffffc0010200(slab|head)
 raw: 0017ffffc0010200 0000000000000000 0000000d00000001 ffff888107c43400
 raw: 0000000000000000 0000000080100010 00000001ffffffff 0000000000000000
 page dumped because: kasan: bad access detected

 Memory state around the buggy address:
  ffff88813f5f1b80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
  ffff88813f5f1c00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 >ffff88813f5f1c80: 00 00 00 00 00 00 00 00 00 fc fc fc fc fc fc fc
                                               ^
  ffff88813f5f1d00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
  ffff88813f5f1d80: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc

using IPv6 tunnels, act_tunnel_key allocates a fixed amount of memory for
the tunnel metadata, but then it expects additional bytes to store tunnel
specific metadata with tunnel_key_copy_opts().

Fix the arguments of __ipv6_tun_set_dst(), so that 'md_size' contains the
size previously computed by tunnel_key_get_opts_len(), like it's done for
IPv4 tunnels.

Fixes: 0ed5269f9e ("net/sched: add tunnel option support to act_tunnel_key")
Reported-by: Shuang Li <shuali@redhat.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://lore.kernel.org/r/36ebe969f6d13ff59912d6464a4356fe6f103766.1603231100.git.dcaratti@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-20 21:10:41 -07:00
Guillaume Nault b130762161 net/sched: act_gate: Unlock ->tcfa_lock in tc_setup_flow_action()
We need to jump to the "err_out_locked" label when
tcf_gate_get_entries() fails. Otherwise, tc_setup_flow_action() exits
with ->tcfa_lock still held.

Fixes: d29bdd69ec ("net: schedule: add action gate offloading")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Cong Wang <xiyou.wangcong@gmail.com>
Link: https://lore.kernel.org/r/12f60e385584c52c22863701c0185e40ab08a7a7.1603207948.git.gnault@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-20 21:00:52 -07:00
Geert Uytterhoeven 010b430d5d mptcp: MPTCP_IPV6 should depend on IPV6 instead of selecting it
MPTCP_IPV6 selects IPV6, thus enabling an optional feature the user may
not want to enable.  Fix this by making MPTCP_IPV6 depend on IPV6, like
is done for all other IPv6 features.

Fixes: f870fa0b57 ("mptcp: Add MPTCP socket stubs")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20201020073839.29226-1-geert@linux-m68k.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-20 20:54:08 -07:00
Defang Bo 280e3ebdaf nfc: Ensure presence of NFC_ATTR_FIRMWARE_NAME attribute in nfc_genl_fw_download()
Check that the NFC_ATTR_FIRMWARE_NAME attributes are provided by
the netlink client prior to accessing them.This prevents potential
unhandled NULL pointer dereference exceptions which can be triggered
by malicious user-mode programs, if they omit one or both of these
attributes.

Similar to commit a0323b979f ("nfc: Ensure presence of required attributes in the activate_target handler").

Fixes: 9674da8759 ("NFC: Add firmware upload netlink command")
Signed-off-by: Defang Bo <bodefang@126.com>
Link: https://lore.kernel.org/r/1603107538-4744-1-git-send-email-bodefang@126.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-20 17:06:22 -07:00
Geert Uytterhoeven b142083b58 mptcp: MPTCP_KUNIT_TESTS should depend on MPTCP instead of selecting it
MPTCP_KUNIT_TESTS selects MPTCP, thus enabling an optional feature the
user may not want to enable.  Fix this by making the test depend on
MPTCP instead.

Fixes: a00a582203 ("mptcp: move crypto test to KUNIT")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20201019113240.11516-1-geert@linux-m68k.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-20 16:50:06 -07:00
Geliang Tang 65b8c8a620 mptcp: move mptcp_options_received's port initialization
Move mptcp_options_received's port initialization from
mptcp_parse_option to mptcp_get_options, put it together with
the other fields initializations of mptcp_options_received.

Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-20 16:32:36 -07:00
Geliang Tang fe2d9b1a0e mptcp: initialize mptcp_options_received's ahmac
Initialize mptcp_options_received's ahmac to zero, otherwise it
will be a random number when receiving ADD_ADDR suboption with echo-flag=1.

Fixes: 3df523ab58 ("mptcp: Add ADD_ADDR handling")
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-20 16:32:14 -07:00
Roi Dayan 47b5d2a107 net/sched: act_ct: Fix adding udp port mangle operation
Need to use the udp header type and not tcp.

Fixes: 9c26ba9b1f ("net/sched: act_ct: Instantiate flow table entry actions")
Signed-off-by: Roi Dayan <roid@nvidia.com>
Reviewed-by: Paul Blakey <paulb@nvidia.com>
Link: https://lore.kernel.org/r/20201019090244.3015186-1-roid@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-20 16:15:51 -07:00
Linus Torvalds 59f0e7eb2f NFS Client Updates for Linux 5.10
- Stable Fixes:
   - Wait for stateid updates after CLOSE/OPEN_DOWNGRADE # v5.4+
   - Fix nfs_path in case of a rename retry
   - Support EXCHID4_FLAG_SUPP_FENCE_OPS v4.2 EXCHANGE_ID flag
 
 - New features and improvements:
   - Replace dprintk() calls with tracepoints
   - Make cache consistency bitmap dynamic
   - Added support for the NFS v4.2 READ_PLUS operation
   - Improvements to net namespace uniquifier
 
 - Other bugfixes and cleanups
   - Remove redundant clnt pointer
   - Don't update timeout values on connection resets
   - Remove redundant tracepoints
   - Various cleanups to comments
   - Fix oops when trying to use copy_file_range with v4.0 source server
   - Improvements to flexfiles mirrors
   - Add missing "local_lock=posix" mount option
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEEnZ5MQTpR7cLU7KEp18tUv7ClQOsFAl+PJv0ACgkQ18tUv7Cl
 QOtB+hAAza4BwQSAZs0QbszPcoNV0f0qND99hWcJ2ad5KCr8S5eNYaMqB8G8lbS+
 Ahuv6xRy69l2vjHvINXoSaSiXClYNAlAr5myiW0DqMLDpVV8VEMAhqgFJK97VpqQ
 AsbsdFwC4xAcQ+6nJ+IfK9f8AOYhvARkOP3171qkq0jX3Eq4j1IiQARn+JrGFZFL
 waC4UtVhCnx5z5pg7jyu7Ar4N0Xky72+Fm1EvRog4gndX2JbNNSkwavD33mWZ8iN
 3q6DRq/AtEk9F4ttPwVeALvpNCBqjoGcNw5FCBil7x4V+xIbDI2FBhusKas3GzXm
 W2tyUuJMTGpA6ZjkyYDcg0jC8vKUiUpMWgT3oZoQ/6g7P4vPzB/XB/RQcAInMRjS
 /MhWZ3YNQmApnVCIZSwOa9+oNUc69dM0+vqmesLvvb/aNjzRnGwiJNiuWGyrwoGX
 3SzpPUcJixa3+eKLi9uEHojKB+SuPIrB/HW4UYh/ZpOMyilVqUnX8RYbaK3qQ/gK
 Un++LjTmao9cXyjIDCiHJB630W01YSWXq1nwuSYkLuXCuALmmtgA4z8pm+4K+w+G
 SctETKVcD0qi3Yx5mFdU5A1dHXMB7nzYNaiRWYLvLO5qAR33nUPI4lV8rog2TUPe
 2iW4n0j2YxnTlwR3QMPYJRndP7KeR5XvOoNuh3XpKRVbmbc7/A4=
 =6RM5
 -----END PGP SIGNATURE-----

Merge tag 'nfs-for-5.10-1' of git://git.linux-nfs.org/projects/anna/linux-nfs

Pull NFS client updates from Anna Schumaker:
 "Stable Fixes:
   - Wait for stateid updates after CLOSE/OPEN_DOWNGRADE # v5.4+
   - Fix nfs_path in case of a rename retry
   - Support EXCHID4_FLAG_SUPP_FENCE_OPS v4.2 EXCHANGE_ID flag

  New features and improvements:
   - Replace dprintk() calls with tracepoints
   - Make cache consistency bitmap dynamic
   - Added support for the NFS v4.2 READ_PLUS operation
   - Improvements to net namespace uniquifier

  Other bugfixes and cleanups:
   - Remove redundant clnt pointer
   - Don't update timeout values on connection resets
   - Remove redundant tracepoints
   - Various cleanups to comments
   - Fix oops when trying to use copy_file_range with v4.0 source server
   - Improvements to flexfiles mirrors
   - Add missing 'local_lock=posix' mount option"

* tag 'nfs-for-5.10-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (55 commits)
  NFSv4.2: support EXCHGID4_FLAG_SUPP_FENCE_OPS 4.2 EXCHANGE_ID flag
  NFSv4: Fix up RCU annotations for struct nfs_netns_client
  NFS: Only reference user namespace from nfs4idmap struct instead of cred
  nfs: add missing "posix" local_lock constant table definition
  NFSv4: Use the net namespace uniquifier if it is set
  NFSv4: Clean up initialisation of uniquified client id strings
  NFS: Decode a full READ_PLUS reply
  SUNRPC: Add an xdr_align_data() function
  NFS: Add READ_PLUS hole segment decoding
  SUNRPC: Add the ability to expand holes in data pages
  SUNRPC: Split out _shift_data_right_tail()
  SUNRPC: Split out xdr_realign_pages() from xdr_align_pages()
  NFS: Add READ_PLUS data segment support
  NFS: Use xdr_page_pos() in NFSv4 decode_getacl()
  SUNRPC: Implement a xdr_page_pos() function
  SUNRPC: Split out a function for setting current page
  NFS: fix nfs_path in case of a rename retry
  fs: nfs: return per memcg count for xattr shrinkers
  NFSv4: Wait for stateid updates after CLOSE/OPEN_DOWNGRADE
  nfs: remove incorrect fallthrough label
  ...
2020-10-20 13:26:30 -07:00
Martijn de Gouw d48c812474 SUNRPC: fix copying of multiple pages in gss_read_proxy_verf()
When the passed token is longer than 4032 bytes, the remaining part
of the token must be copied from the rqstp->rq_arg.pages. But the
copy must make sure it happens in a consecutive way.

With the existing code, the first memcpy copies 'length' bytes from
argv->iobase, but since the header is in front, this never fills the
whole first page of in_token->pages.

The mecpy in the loop copies the following bytes, but starts writing at
the next page of in_token->pages.  This leaves the last bytes of page 0
unwritten.

Symptoms were that users with many groups were not able to access NFS
exports, when using Active Directory as the KDC.

Signed-off-by: Martijn de Gouw <martijn.de.gouw@prodrive-technologies.com>
Fixes: 5866efa8cb "SUNRPC: Fix svcauth_gss_proxy_init()"
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2020-10-20 13:21:30 -04:00
Roberto Bergantinos Corpas 27a1e8a0f7 sunrpc: raise kernel RPC channel buffer size
Its possible that using AUTH_SYS and mountd manage-gids option a
user may hit the 8k RPC channel buffer limit. This have been observed
on field, causing unanswered RPCs on clients after mountd fails to
write on channel :

rpc.mountd[11231]: auth_unix_gid: error writing reply

Userland nfs-utils uses a buffer size of 32k (RPC_CHAN_BUF_SIZE), so
lets match those two.

Signed-off-by: Roberto Bergantinos Corpas <rbergant@redhat.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2020-10-20 13:21:30 -04:00
Saeed Mirzamohammadi 31cc578ae2 netfilter: nftables_offload: KASAN slab-out-of-bounds Read in nft_flow_rule_create
This patch fixes the issue due to:

BUG: KASAN: slab-out-of-bounds in nft_flow_rule_create+0x622/0x6a2
net/netfilter/nf_tables_offload.c:40
Read of size 8 at addr ffff888103910b58 by task syz-executor227/16244

The error happens when expr->ops is accessed early on before performing the boundary check and after nft_expr_next() moves the expr to go out-of-bounds.

This patch checks the boundary condition before expr->ops that fixes the slab-out-of-bounds Read issue.

Add nft_expr_more() and use it to fix this problem.

Signed-off-by: Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-10-20 13:54:54 +02:00
Timothée COCAULT 63137bc588 netfilter: ebtables: Fixes dropping of small packets in bridge nat
Fixes an error causing small packets to get dropped. skb_ensure_writable
expects the second parameter to be a length in the ethernet payload.=20
If we want to write the ethernet header (src, dst), we should pass 0.
Otherwise, packets with small payloads (< ETH_ALEN) will get dropped.

Fixes: c1a8311679 ("netfilter: bridge: convert skb_make_writable to skb_ensure_writable")
Signed-off-by: Timothée COCAULT <timothee.cocault@orange.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-10-20 13:54:53 +02:00
Georg Kohmann 68f9f9c2c3 netfilter: Drop fragmented ndisc packets assembled in netfilter
Fragmented ndisc packets assembled in netfilter not dropped as specified
in RFC 6980, section 5. This behaviour breaks TAHI IPv6 Core Conformance
Tests v6LC.2.1.22/23, V6LC.2.2.26/27 and V6LC.2.3.18.

Setting IP6SKB_FRAGMENTED flag during reassembly.

References: commit b800c3b966 ("ipv6: drop fragmented ndisc packets by default (RFC 6980)")
Signed-off-by: Georg Kohmann <geokohma@cisco.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-10-20 13:54:53 +02:00
Francesco Ruggeri 4f25434bcc netfilter: conntrack: connection timeout after re-register
If the first packet conntrack sees after a re-register is an outgoing
keepalive packet with no data (SEG.SEQ = SND.NXT-1), td_end is set to
SND.NXT-1.
When the peer correctly acknowledges SND.NXT, tcp_in_window fails
check III (Upper bound for valid (s)ack: sack <= receiver.td_end) and
returns false, which cascades into nf_conntrack_in setting
skb->_nfct = 0 and in later conntrack iptables rules not matching.
In cases where iptables are dropping packets that do not match
conntrack rules this can result in idle tcp connections to time out.

v2: adjust td_end when getting the reply rather than when sending out
    the keepalive packet.

Fixes: f94e63801a ("netfilter: conntrack: reset tcp maxwin on re-register")
Signed-off-by: Francesco Ruggeri <fruggeri@arista.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-10-20 13:54:53 +02:00
longguang.yue 79dce09ab0 ipvs: adjust the debug info in function set_tcp_state
Outputting client,virtual,dst addresses info when tcp state changes,
which makes the connection debug more clear

Signed-off-by: longguang.yue <bigclouds@163.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2020-10-20 13:54:46 +02:00
Ido Schimmel df6afe2f7c nexthop: Fix performance regression in nexthop deletion
While insertion of 16k nexthops all using the same netdev ('dummy10')
takes less than a second, deletion takes about 130 seconds:

# time -p ip -b nexthop.batch
real 0.29
user 0.01
sys 0.15

# time -p ip link set dev dummy10 down
real 131.03
user 0.06
sys 0.52

This is because of repeated calls to synchronize_rcu() whenever a
nexthop is removed from a nexthop group:

# /usr/share/bcc/tools/offcputime -p `pgrep -nx ip` -K
...
    b'finish_task_switch'
    b'schedule'
    b'schedule_timeout'
    b'wait_for_completion'
    b'__wait_rcu_gp'
    b'synchronize_rcu.part.0'
    b'synchronize_rcu'
    b'__remove_nexthop'
    b'remove_nexthop'
    b'nexthop_flush_dev'
    b'nh_netdev_event'
    b'raw_notifier_call_chain'
    b'call_netdevice_notifiers_info'
    b'__dev_notify_flags'
    b'dev_change_flags'
    b'do_setlink'
    b'__rtnl_newlink'
    b'rtnl_newlink'
    b'rtnetlink_rcv_msg'
    b'netlink_rcv_skb'
    b'rtnetlink_rcv'
    b'netlink_unicast'
    b'netlink_sendmsg'
    b'____sys_sendmsg'
    b'___sys_sendmsg'
    b'__sys_sendmsg'
    b'__x64_sys_sendmsg'
    b'do_syscall_64'
    b'entry_SYSCALL_64_after_hwframe'
    -                ip (277)
        126554955

Since nexthops are always deleted under RTNL, synchronize_net() can be
used instead. It will call synchronize_rcu_expedited() which only blocks
for several microseconds as opposed to multiple milliseconds like
synchronize_rcu().

With this patch deletion of 16k nexthops takes less than a second:

# time -p ip link set dev dummy10 down
real 0.12
user 0.00
sys 0.04

Tested with fib_nexthops.sh which includes torture tests that prompted
the initial change:

# ./fib_nexthops.sh
...
Tests passed: 134
Tests failed:   0

Fixes: 90f33bffa3 ("nexthops: don't modify published nexthop groups")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jesse Brandeburg <jesse.brandeburg@intel.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com>
Link: https://lore.kernel.org/r/20201016172914.643282-1-idosch@idosch.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-19 20:07:15 -07:00
Christian Eggers bc7e343dbd net: dsa: tag_ksz: KSZ8795 and KSZ9477 also use tail tags
The Marvell 88E6060 uses tag_trailer.c and the KSZ8795, KSZ9477 and
KSZ9893 switches also use tail tags.

Fixes: 7a6ffe764b ("net: dsa: point out the tail taggers")
Signed-off-by: Christian Eggers <ceggers@arri.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20201016171603.10587-1-ceggers@arri.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-19 17:32:50 -07:00
Taehee Yoo 0e8b8d6a2d net: core: use list_del_init() instead of list_del() in netdev_run_todo()
dev->unlink_list is reused unless dev is deleted.
So, list_del() should not be used.
Due to using list_del(), dev->unlink_list can't be reused so that
dev->nested_level update logic doesn't work.
In order to fix this bug, list_del_init() should be used instead
of list_del().

Test commands:
    ip link add bond0 type bond
    ip link add bond1 type bond
    ip link set bond0 master bond1
    ip link set bond0 nomaster
    ip link set bond1 master bond0
    ip link set bond1 nomaster

Splat looks like:
[  255.750458][ T1030] ============================================
[  255.751967][ T1030] WARNING: possible recursive locking detected
[  255.753435][ T1030] 5.9.0-rc8+ #772 Not tainted
[  255.754553][ T1030] --------------------------------------------
[  255.756047][ T1030] ip/1030 is trying to acquire lock:
[  255.757304][ T1030] ffff88811782a280 (&dev_addr_list_lock_key/1){+...}-{2:2}, at: dev_mc_sync_multiple+0xc2/0x150
[  255.760056][ T1030]
[  255.760056][ T1030] but task is already holding lock:
[  255.761862][ T1030] ffff88811130a280 (&dev_addr_list_lock_key/1){+...}-{2:2}, at: bond_enslave+0x3d4d/0x43e0 [bonding]
[  255.764581][ T1030]
[  255.764581][ T1030] other info that might help us debug this:
[  255.766645][ T1030]  Possible unsafe locking scenario:
[  255.766645][ T1030]
[  255.768566][ T1030]        CPU0
[  255.769415][ T1030]        ----
[  255.770259][ T1030]   lock(&dev_addr_list_lock_key/1);
[  255.771629][ T1030]   lock(&dev_addr_list_lock_key/1);
[  255.772994][ T1030]
[  255.772994][ T1030]  *** DEADLOCK ***
[  255.772994][ T1030]
[  255.775091][ T1030]  May be due to missing lock nesting notation
[  255.775091][ T1030]
[  255.777182][ T1030] 2 locks held by ip/1030:
[  255.778299][ T1030]  #0: ffffffffb1f63250 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x2e4/0x8b0
[  255.780600][ T1030]  #1: ffff88811130a280 (&dev_addr_list_lock_key/1){+...}-{2:2}, at: bond_enslave+0x3d4d/0x43e0 [bonding]
[  255.783411][ T1030]
[  255.783411][ T1030] stack backtrace:
[  255.784874][ T1030] CPU: 7 PID: 1030 Comm: ip Not tainted 5.9.0-rc8+ #772
[  255.786595][ T1030] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1 04/01/2014
[  255.789030][ T1030] Call Trace:
[  255.789850][ T1030]  dump_stack+0x99/0xd0
[  255.790882][ T1030]  __lock_acquire.cold.71+0x166/0x3cc
[  255.792285][ T1030]  ? register_lock_class+0x1a30/0x1a30
[  255.793619][ T1030]  ? rcu_read_lock_sched_held+0x91/0xc0
[  255.794963][ T1030]  ? rcu_read_lock_bh_held+0xa0/0xa0
[  255.796246][ T1030]  lock_acquire+0x1b8/0x850
[  255.797332][ T1030]  ? dev_mc_sync_multiple+0xc2/0x150
[  255.798624][ T1030]  ? bond_enslave+0x3d4d/0x43e0 [bonding]
[  255.800039][ T1030]  ? check_flags+0x50/0x50
[  255.801143][ T1030]  ? lock_contended+0xd80/0xd80
[  255.802341][ T1030]  _raw_spin_lock_nested+0x2e/0x70
[  255.803592][ T1030]  ? dev_mc_sync_multiple+0xc2/0x150
[  255.804897][ T1030]  dev_mc_sync_multiple+0xc2/0x150
[  255.806168][ T1030]  bond_enslave+0x3d58/0x43e0 [bonding]
[  255.807542][ T1030]  ? __lock_acquire+0xe53/0x51b0
[  255.808824][ T1030]  ? bond_update_slave_arr+0xdc0/0xdc0 [bonding]
[  255.810451][ T1030]  ? check_chain_key+0x236/0x5e0
[  255.811742][ T1030]  ? mutex_is_locked+0x13/0x50
[  255.812910][ T1030]  ? rtnl_is_locked+0x11/0x20
[  255.814061][ T1030]  ? netdev_master_upper_dev_get+0xf/0x120
[  255.815553][ T1030]  do_setlink+0x94c/0x3040
[ ... ]

Reported-by: syzbot+4a0f7bc34e3997a6c7df@syzkaller.appspotmail.com
Fixes: 1fc70edb7d ("net: core: add nested_level variable in net_device")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Link: https://lore.kernel.org/r/20201015162606.9377-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-18 14:50:25 -07:00
Eelco Chaudron f981fc3d51 net: openvswitch: fix to make sure flow_lookup() is not preempted
The flow_lookup() function uses per CPU variables, which must be called
with BH disabled. However, this is fine in the general NAPI use case
where the local BH is disabled. But, it's also called from the netlink
context. The below patch makes sure that even in the netlink path, the
BH is disabled.

In addition, u64_stats_update_begin() requires a lock to ensure one writer
which is not ensured here. Making it per-CPU and disabling NAPI (softirq)
ensures that there is always only one writer.

Fixes: eac87c413b ("net: openvswitch: reorder masks array based on usage")
Reported-by: Juri Lelli <jlelli@redhat.com>
Signed-off-by: Eelco Chaudron <echaudro@redhat.com>
Link: https://lore.kernel.org/r/160295903253.7789.826736662555102345.stgit@ebuild
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-18 12:29:36 -07:00
Eric Dumazet b38e7819ca icmp: randomize the global rate limiter
Keyu Man reported that the ICMP rate limiter could be used
by attackers to get useful signal. Details will be provided
in an upcoming academic publication.

Our solution is to add some noise, so that the attackers
no longer can get help from the predictable token bucket limiter.

Fixes: 4cdf507d54 ("icmp: add a global rate limitation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Keyu Man <kman001@ucr.edu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-16 16:47:09 -07:00
Hoang Huu Le ec78e31852 tipc: fix incorrect setting window for bcast link
In commit 16ad3f4022
("tipc: introduce variable window congestion control"), we applied
the algorithm to select window size from minimum window to the
configured maximum window for unicast link, and, besides we chose
to keep the window size for broadcast link unchanged and equal (i.e
fix window 50)

However, when setting maximum window variable via command, the window
variable was re-initialized to unexpect value (i.e 32).

We fix this by updating the fix window for broadcast as we stated.

Fixes: 16ad3f4022 ("tipc: introduce variable window congestion control")
Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Huu Le <hoang.h.le@dektech.com.au>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-16 14:09:12 -07:00
Hoang Huu Le 75cee397ae tipc: re-configure queue limit for broadcast link
The queue limit of the broadcast link is being calculated base on initial
MTU. However, when MTU value changed (e.g manual changing MTU on NIC
device, MTU negotiation etc.,) we do not re-calculate queue limit.
This gives throughput does not reflect with the change.

So fix it by calling the function to re-calculate queue limit of the
broadcast link.

Acked-by: Jon Maloy <jmaloy@redhat.com>
Signed-off-by: Hoang Huu Le <hoang.h.le@dektech.com.au>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-16 14:09:12 -07:00
Dan Aloni c327a310ec svcrdma: fix bounce buffers for unaligned offsets and multiple pages
This was discovered using O_DIRECT at the client side, with small
unaligned file offsets or IOs that span multiple file pages.

Fixes: e248aa7be8 ("svcrdma: Remove max_sge check at connect time")
Signed-off-by: Dan Aloni <dan@kernelim.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2020-10-16 15:15:04 -04:00
Artur Molchanov c09f56b8f6 net/sunrpc: Fix return value for sysctl sunrpc.transports
Fix returning value for sysctl sunrpc.transports.
Return error code from sysctl proc_handler function proc_do_xprt instead of number of the written bytes.
Otherwise sysctl returns random garbage for this key.

Since v1:
- Handle negative returned value from memory_read_from_buffer as an error

Signed-off-by: Artur Molchanov <arturmolchanov@gmail.com>
Cc: stable@vger.kernel.org
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
2020-10-16 15:15:04 -04:00
Linus Torvalds 9ff9b0d392 networking changes for the 5.10 merge window
Add redirect_neigh() BPF packet redirect helper, allowing to limit stack
 traversal in common container configs and improving TCP back-pressure.
 Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.
 
 Expand netlink policy support and improve policy export to user space.
 (Ge)netlink core performs request validation according to declared
 policies. Expand the expressiveness of those policies (min/max length
 and bitmasks). Allow dumping policies for particular commands.
 This is used for feature discovery by user space (instead of kernel
 version parsing or trial and error).
 
 Support IGMPv3/MLDv2 multicast listener discovery protocols in bridge.
 
 Allow more than 255 IPv4 multicast interfaces.
 
 Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
 packets of TCPv6.
 
 In Multi-patch TCP (MPTCP) support concurrent transmission of data
 on multiple subflows in a load balancing scenario. Enhance advertising
 addresses via the RM_ADDR/ADD_ADDR options.
 
 Support SMC-Dv2 version of SMC, which enables multi-subnet deployments.
 
 Allow more calls to same peer in RxRPC.
 
 Support two new Controller Area Network (CAN) protocols -
 CAN-FD and ISO 15765-2:2016.
 
 Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
 kernel problem.
 
 Add TC actions for implementing MPLS L2 VPNs.
 
 Improve nexthop code - e.g. handle various corner cases when nexthop
 objects are removed from groups better, skip unnecessary notifications
 and make it easier to offload nexthops into HW by converting
 to a blocking notifier.
 
 Support adding and consuming TCP header options by BPF programs,
 opening the doors for easy experimental and deployment-specific
 TCP option use.
 
 Reorganize TCP congestion control (CC) initialization to simplify life
 of TCP CC implemented in BPF.
 
 Add support for shipping BPF programs with the kernel and loading them
 early on boot via the User Mode Driver mechanism, hence reusing all the
 user space infra we have.
 
 Support sleepable BPF programs, initially targeting LSM and tracing.
 
 Add bpf_d_path() helper for returning full path for given 'struct path'.
 
 Make bpf_tail_call compatible with bpf-to-bpf calls.
 
 Allow BPF programs to call map_update_elem on sockmaps.
 
 Add BPF Type Format (BTF) support for type and enum discovery, as
 well as support for using BTF within the kernel itself (current use
 is for pretty printing structures).
 
 Support listing and getting information about bpf_links via the bpf
 syscall.
 
 Enhance kernel interfaces around NIC firmware update. Allow specifying
 overwrite mask to control if settings etc. are reset during update;
 report expected max time operation may take to users; support firmware
 activation without machine reboot incl. limits of how much impact
 reset may have (e.g. dropping link or not).
 
 Extend ethtool configuration interface to report IEEE-standard
 counters, to limit the need for per-vendor logic in user space.
 
 Adopt or extend devlink use for debug, monitoring, fw update
 in many drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw,
 mv88e6xxx, dpaa2-eth).
 
 In mlxsw expose critical and emergency SFP module temperature alarms.
 Refactor port buffer handling to make the defaults more suitable and
 support setting these values explicitly via the DCBNL interface.
 
 Add XDP support for Intel's igb driver.
 
 Support offloading TC flower classification and filtering rules to
 mscc_ocelot switches.
 
 Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
 fixed interval period pulse generator and one-step timestamping in
 dpaa-eth.
 
 Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
 offload.
 
 Add Lynx PHY/PCS MDIO module, and convert various drivers which have
 this HW to use it. Convert mvpp2 to split PCS.
 
 Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
 7-port Mediatek MT7531 IP.
 
 Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
 and wcn3680 support in wcn36xx.
 
 Improve performance for packets which don't require much offloads
 on recent Mellanox NICs by 20% by making multiple packets share
 a descriptor entry.
 
 Move chelsio inline crypto drivers (for TLS and IPsec) from the crypto
 subtree to drivers/net. Move MDIO drivers out of the phy directory.
 
 Clean up a lot of W=1 warnings, reportedly the actively developed
 subsections of networking drivers should now build W=1 warning free.
 
 Make sure drivers don't use in_interrupt() to dynamically adapt their
 code. Convert tasklets to use new tasklet_setup API (sadly this
 conversion is not yet complete).
 
 Signed-off-by: Jakub Kicinski <kuba@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEE6jPA+I1ugmIBA4hXMUZtbf5SIrsFAl+ItRwACgkQMUZtbf5S
 IrtTMg//UxpdR/MirT1DatBU0K/UGAZY82hV7F/UC8tPgjfHZeHvWlDFxfi3YP81
 PtPKbhRZ7DhwBXefUp6nY3UdvjftrJK2lJm8prJUPSsZRye8Wlcb7y65q7/P2y2U
 Efucyopg6RUrmrM0DUsIGYGJgylQLHnMYUl/keCsD4t5Bp4ksyi9R2t5eitGoWzh
 r3QGdbSa0AuWx4iu0i+tqp6Tj0ekMBMXLVb35dtU1t0joj2KTNEnSgABN3prOa8E
 iWYf2erOau68Ogp3yU3miCy0ZU4p/7qGHTtzbcp677692P/ekak6+zmfHLT9/Pjy
 2Stq2z6GoKuVxdktr91D9pA3jxG4LxSJmr0TImcGnXbvkMP3Ez3g9RrpV5fn8j6F
 mZCH8TKZAoD5aJrAJAMkhZmLYE1pvDa7KolSk8WogXrbCnTEb5Nv8FHTS1Qnk3yl
 wSKXuvutFVNLMEHCnWQLtODbTST9DI/aOi6EctPpuOA/ZyL1v3pl+gfp37S+LUTe
 owMnT/7TdvKaTD0+gIyU53M6rAWTtr5YyRQorX9awIu/4Ha0F0gYD7BJZQUGtegp
 HzKt59NiSrFdbSH7UdyemdBF4LuCgIhS7rgfeoUXMXmuPHq7eHXyHZt5dzPPa/xP
 81P0MAvdpFVwg8ij2yp2sHS7sISIRKq17fd1tIewUabxQbjXqPc=
 =bc1U
 -----END PGP SIGNATURE-----

Merge tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:

 - Add redirect_neigh() BPF packet redirect helper, allowing to limit
   stack traversal in common container configs and improving TCP
   back-pressure.

   Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.

 - Expand netlink policy support and improve policy export to user
   space. (Ge)netlink core performs request validation according to
   declared policies. Expand the expressiveness of those policies
   (min/max length and bitmasks). Allow dumping policies for particular
   commands. This is used for feature discovery by user space (instead
   of kernel version parsing or trial and error).

 - Support IGMPv3/MLDv2 multicast listener discovery protocols in
   bridge.

 - Allow more than 255 IPv4 multicast interfaces.

 - Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
   packets of TCPv6.

 - In Multi-patch TCP (MPTCP) support concurrent transmission of data on
   multiple subflows in a load balancing scenario. Enhance advertising
   addresses via the RM_ADDR/ADD_ADDR options.

 - Support SMC-Dv2 version of SMC, which enables multi-subnet
   deployments.

 - Allow more calls to same peer in RxRPC.

 - Support two new Controller Area Network (CAN) protocols - CAN-FD and
   ISO 15765-2:2016.

 - Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
   kernel problem.

 - Add TC actions for implementing MPLS L2 VPNs.

 - Improve nexthop code - e.g. handle various corner cases when nexthop
   objects are removed from groups better, skip unnecessary
   notifications and make it easier to offload nexthops into HW by
   converting to a blocking notifier.

 - Support adding and consuming TCP header options by BPF programs,
   opening the doors for easy experimental and deployment-specific TCP
   option use.

 - Reorganize TCP congestion control (CC) initialization to simplify
   life of TCP CC implemented in BPF.

 - Add support for shipping BPF programs with the kernel and loading
   them early on boot via the User Mode Driver mechanism, hence reusing
   all the user space infra we have.

 - Support sleepable BPF programs, initially targeting LSM and tracing.

 - Add bpf_d_path() helper for returning full path for given 'struct
   path'.

 - Make bpf_tail_call compatible with bpf-to-bpf calls.

 - Allow BPF programs to call map_update_elem on sockmaps.

 - Add BPF Type Format (BTF) support for type and enum discovery, as
   well as support for using BTF within the kernel itself (current use
   is for pretty printing structures).

 - Support listing and getting information about bpf_links via the bpf
   syscall.

 - Enhance kernel interfaces around NIC firmware update. Allow
   specifying overwrite mask to control if settings etc. are reset
   during update; report expected max time operation may take to users;
   support firmware activation without machine reboot incl. limits of
   how much impact reset may have (e.g. dropping link or not).

 - Extend ethtool configuration interface to report IEEE-standard
   counters, to limit the need for per-vendor logic in user space.

 - Adopt or extend devlink use for debug, monitoring, fw update in many
   drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx,
   dpaa2-eth).

 - In mlxsw expose critical and emergency SFP module temperature alarms.
   Refactor port buffer handling to make the defaults more suitable and
   support setting these values explicitly via the DCBNL interface.

 - Add XDP support for Intel's igb driver.

 - Support offloading TC flower classification and filtering rules to
   mscc_ocelot switches.

 - Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
   fixed interval period pulse generator and one-step timestamping in
   dpaa-eth.

 - Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
   offload.

 - Add Lynx PHY/PCS MDIO module, and convert various drivers which have
   this HW to use it. Convert mvpp2 to split PCS.

 - Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
   7-port Mediatek MT7531 IP.

 - Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
   and wcn3680 support in wcn36xx.

 - Improve performance for packets which don't require much offloads on
   recent Mellanox NICs by 20% by making multiple packets share a
   descriptor entry.

 - Move chelsio inline crypto drivers (for TLS and IPsec) from the
   crypto subtree to drivers/net. Move MDIO drivers out of the phy
   directory.

 - Clean up a lot of W=1 warnings, reportedly the actively developed
   subsections of networking drivers should now build W=1 warning free.

 - Make sure drivers don't use in_interrupt() to dynamically adapt their
   code. Convert tasklets to use new tasklet_setup API (sadly this
   conversion is not yet complete).

* tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits)
  Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH"
  net, sockmap: Don't call bpf_prog_put() on NULL pointer
  bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo
  bpf, sockmap: Add locking annotations to iterator
  netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements
  net: fix pos incrementment in ipv6_route_seq_next
  net/smc: fix invalid return code in smcd_new_buf_create()
  net/smc: fix valid DMBE buffer sizes
  net/smc: fix use-after-free of delayed events
  bpfilter: Fix build error with CONFIG_BPFILTER_UMH
  cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr
  net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info
  bpf: Fix register equivalence tracking.
  rxrpc: Fix loss of final ack on shutdown
  rxrpc: Fix bundle counting for exclusive connections
  netfilter: restore NF_INET_NUMHOOKS
  ibmveth: Identify ingress large send packets.
  ibmveth: Switch order of ibmveth_helper calls.
  cxgb4: handle 4-tuple PEDIT to NAT mode translation
  selftests: Add VRF route leaking tests
  ...
2020-10-15 18:42:13 -07:00
Jakub Kicinski 105faa8742 Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next
Daniel Borkmann says:

====================
pull-request: bpf-next 2020-10-15

The main changes are:

1) Fix register equivalence tracking in verifier, from Alexei Starovoitov.

2) Fix sockmap error path to not call bpf_prog_put() with NULL, from Alex Dewar.

3) Fix sockmap to add locking annotations to iterator, from Lorenz Bauer.

4) Fix tcp_hdr_options test to use loopback address, from Martin KaFai Lau.
====================

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-15 12:45:00 -07:00
Jakub Kicinski 2295cddf99 Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Minor conflicts in net/mptcp/protocol.h and
tools/testing/selftests/net/Makefile.

In both cases code was added on both sides in the same place
so just keep both.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-15 12:43:21 -07:00
Jakub Kicinski 2ecbc1f684 Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH"
This reverts commit 1d273fcc2c.

Alexei points out there's nothing implying headers will be built
and therefore exist under usr/include, so this fix doesn't make
much sense.

Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-15 12:33:24 -07:00
Alex Dewar 83c11c1755 net, sockmap: Don't call bpf_prog_put() on NULL pointer
If bpf_prog_inc_not_zero() fails for skb_parser, then bpf_prog_put() is
called unconditionally on skb_verdict, even though it may be NULL. Fix
and tidy up error path.

Fixes: 743df8b774 ("bpf, sockmap: Check skb_verdict and skb_parser programs explicitly")
Addresses-Coverity-ID: 1497799: Null pointer dereferences (FORWARD_NULL)
Signed-off-by: Alex Dewar <alex.dewar90@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20201012170952.60750-1-alex.dewar90@gmail.com
2020-10-15 21:05:23 +02:00
Lorenz Bauer f58423aeab bpf, sockmap: Add locking annotations to iterator
The sparse checker currently outputs the following warnings:

    include/linux/rcupdate.h:632:9: sparse: sparse: context imbalance in 'sock_hash_seq_start' - wrong count at exit
    include/linux/rcupdate.h:632:9: sparse: sparse: context imbalance in 'sock_map_seq_start' - wrong count at exit

Add the necessary __acquires and __release annotations to make the
iterator locking schema palatable to sparse. Also add __must_hold
for good measure.

The kernel codebase uses both __acquires(rcu) and __acquires(RCU).
I couldn't find any guidance which one is preferred, so I used
what is easier to type out.

Fixes: 0365351524 ("net: Allow iterating sockmap and sockhash")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Jakub Sitnicki <jakub@cloudflare.com>
Link: https://lore.kernel.org/bpf/20201012091850.67452-1-lmb@cloudflare.com
2020-10-15 20:49:56 +02:00
Davide Caratti 346e320cb2 netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements
nftables payload statements are used to mangle SCTP headers, but they can
only replace the Internet Checksum. As a consequence, nftables rules that
mangle sport/dport/vtag in SCTP headers potentially generate packets that
are discarded by the receiver, unless the CRC-32C is "offloaded" (e.g the
rule mangles a skb having 'ip_summed' equal to 'CHECKSUM_PARTIAL'.

Fix this extending uAPI definitions and L4 checksum update function, in a
way that userspace programs (e.g. nft) can instruct the kernel to compute
CRC-32C in SCTP headers. Also ensure that LIBCRC32C is built if NF_TABLES
is 'y' or 'm' in the kernel build configuration.

Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-15 11:45:19 -07:00
Yonghong Song 6617dfd440 net: fix pos incrementment in ipv6_route_seq_next
Commit 4fc427e051 ("ipv6_route_seq_next should increase position index")
tried to fix the issue where seq_file pos is not increased
if a NULL element is returned with seq_ops->next(). See bug
  https://bugzilla.kernel.org/show_bug.cgi?id=206283
The commit effectively does:
  - increase pos for all seq_ops->start()
  - increase pos for all seq_ops->next()

For ipv6_route, increasing pos for all seq_ops->next() is correct.
But increasing pos for seq_ops->start() is not correct
since pos is used to determine how many items to skip during
seq_ops->start():
  iter->skip = *pos;
seq_ops->start() just fetches the *current* pos item.
The item can be skipped only after seq_ops->show() which essentially
is the beginning of seq_ops->next().

For example, I have 7 ipv6 route entries,
  root@arch-fb-vm1:~/net-next dd if=/proc/net/ipv6_route bs=4096
  00000000000000000000000000000000 40 00000000000000000000000000000000 00 00000000000000000000000000000000 00000400 00000001 00000000 00000001     eth0
  fe800000000000000000000000000000 40 00000000000000000000000000000000 00 00000000000000000000000000000000 00000100 00000001 00000000 00000001     eth0
  00000000000000000000000000000000 00 00000000000000000000000000000000 00 00000000000000000000000000000000 ffffffff 00000001 00000000 00200200       lo
  00000000000000000000000000000001 80 00000000000000000000000000000000 00 00000000000000000000000000000000 00000000 00000003 00000000 80200001       lo
  fe800000000000002050e3fffebd3be8 80 00000000000000000000000000000000 00 00000000000000000000000000000000 00000000 00000002 00000000 80200001     eth0
  ff000000000000000000000000000000 08 00000000000000000000000000000000 00 00000000000000000000000000000000 00000100 00000004 00000000 00000001     eth0
  00000000000000000000000000000000 00 00000000000000000000000000000000 00 00000000000000000000000000000000 ffffffff 00000001 00000000 00200200       lo
  0+1 records in
  0+1 records out
  1050 bytes (1.0 kB, 1.0 KiB) copied, 0.00707908 s, 148 kB/s
  root@arch-fb-vm1:~/net-next

In the above, I specify buffer size 4096, so all records can be returned
to user space with a single trip to the kernel.

If I use buffer size 128, since each record size is 149, internally
kernel seq_read() will read 149 into its internal buffer and return the data
to user space in two read() syscalls. Then user read() syscall will trigger
next seq_ops->start(). Since the current implementation increased pos even
for seq_ops->start(), it will skip record #2, #4 and #6, assuming the first
record is #1.

  root@arch-fb-vm1:~/net-next dd if=/proc/net/ipv6_route bs=128
  00000000000000000000000000000000 40 00000000000000000000000000000000 00 00000000000000000000000000000000 00000400 00000001 00000000 00000001     eth0
  00000000000000000000000000000000 00 00000000000000000000000000000000 00 00000000000000000000000000000000 ffffffff 00000001 00000000 00200200       lo
  fe800000000000002050e3fffebd3be8 80 00000000000000000000000000000000 00 00000000000000000000000000000000 00000000 00000002 00000000 80200001     eth0
  00000000000000000000000000000000 00 00000000000000000000000000000000 00 00000000000000000000000000000000 ffffffff 00000001 00000000 00200200       lo
4+1 records in
4+1 records out
600 bytes copied, 0.00127758 s, 470 kB/s

To fix the problem, create a fake pos pointer so seq_ops->start()
won't actually increase seq_file pos. With this fix, the
above `dd` command with `bs=128` will show correct result.

Fixes: 4fc427e051 ("ipv6_route_seq_next should increase position index")
Cc: Alexei Starovoitov <ast@kernel.org>
Suggested-by: Vasily Averin <vvs@virtuozzo.com>
Reviewed-by: Vasily Averin <vvs@virtuozzo.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-15 10:21:28 -07:00
Karsten Graul 6b1bbf94ab net/smc: fix invalid return code in smcd_new_buf_create()
smc_ism_register_dmb() returns error codes set by the ISM driver which
are not guaranteed to be negative or in the errno range. Such values
would not be handled by ERR_PTR() and finally the return code will be
used as a memory address.
Fix that by using a valid negative errno value with ERR_PTR().

Fixes: 72b7f6c487 ("net/smc: unique reason code for exceeded max dmb count")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-15 09:54:43 -07:00
Karsten Graul ef12ad4588 net/smc: fix valid DMBE buffer sizes
The SMCD_DMBE_SIZES should include all valid DMBE buffer sizes, so the
correct value is 6 which means 1MB. With 7 the registration of an ISM
buffer would always fail because of the invalid size requested.
Fix that and set the value to 6.

Fixes: c6ba7c9ba4 ("net/smc: add base infrastructure for SMC-D and ISM")
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2020-10-15 09:54:43 -07:00