Граф коммитов

8 Коммитов

Автор SHA1 Сообщение Дата
Heikki Krogerus 08f871a3ac usb: dwc3: host: convey the PHYs to xhci
On some platforms a PHY may need to be handled also in the
host controller driver. Exynos5420 SoC requires some "PHY
tuning" based on the USB speed. This patch delivers dwc3's
PHYs to the xhci platform device when it's created.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Tested-by: Vivek Gautam <gautam.vivek@samsung.com>
Acked-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2014-11-22 13:58:48 +05:30
Pratyush Anand b2f463e130 dwc3: host: Enable USB3 LPM capability
All dwc3 based xhci host controller supports USB3.0 LPM functionality.
Therefore enable it in platform data for all dwc3 based xhci device if
DWC3_HOST_USB3_LPM_ENABLE is selected in Kconfig.

Signed-off-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-of-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2014-07-09 15:41:34 -07:00
Felipe Balbi 5945f789c8 usb: dwc3: switch to GPL v2 only
This is a Linux-only driver which makes use
of GPL-only symbols. It makes no sense to
maintain Dual BSD/GPL licensing for this driver.

Considering that the amount of work to use this
driver in any different operating system would likely
be as large as developing the driver from scratch and
considering that we depend on GPL-only symbols, we
will switch over to a GPL v2-only license.

Cc: Anton Tikhomirov <av.tikhomirov@samsung.com>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-07-29 13:56:44 +03:00
Vivek Gautam 52758bcb7c usb: dwc3: host: Change platform device ID for xhci-hcd to AUTO
Multiple dwc3 controllers will try to allocate multiple xhci-hcd
interfaces.
Changing platform device IDs from NONE to AUTO to support
such cases.

Signed-off-by: Vivek Gautam <gautam.vivek@samsung.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-01-25 13:19:52 +02:00
Ido Shayevitz 51249dca62 usb: dwc3: core: split host address space
This fix prevents a problem with dwc3 and host mode where
we were requesting the entire memory region in dwc3/core.c,
thus preventing xhci-plat from ever ioremapping its own address space.

Signed-off-by: Ido Shayevitz <idos@codeaurora.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-04-24 15:37:04 +03:00
Felipe Balbi 8b5d6b0a43 usb: dwc3: host: align on host device name
PCI uses xhci-hcd, so let's use the same device
name to avoid confusion.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2012-02-06 11:48:42 +02:00
Sebastian Andrzej Siewior bd178f2d62 usb: dwc3: host: remove unused includes
None of these are required atm.

Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:48:19 +02:00
Felipe Balbi d07e8819a0 usb: dwc3: add xHCI Host support
The Designware USB3 IP can be configured with
an internal xHCI. If we're running on such a
version, let's start the xHCI stack.

Signed-off-by: Felipe Balbi <balbi@ti.com>
2011-12-12 11:48:12 +02:00