Граф коммитов

339 Коммитов

Автор SHA1 Сообщение Дата
Darrick J. Wong 13eaec4b2a xfs: don't commit sunit/swidth updates to disk if that would cause repair failures
Alex Lyakas reported[1] that mounting an xfs filesystem with new sunit
and swidth values could cause xfs_repair to fail loudly.  The problem
here is that repair calculates the where mkfs should have allocated the
root inode, based on the superblock geometry.  The allocation decisions
depend on sunit, which means that we really can't go updating sunit if
it would lead to a subsequent repair failure on an otherwise correct
filesystem.

Port from xfs_repair some code that computes the location of the root
inode and teach mount to skip the ondisk update if it would cause
problems for repair.  Along the way we'll update the documentation,
provide a function for computing the minimum AGFL size instead of
open-coding it, and cut down some indenting in the mount code.

Note that we allow the mount to proceed (and new allocations will
reflect this new geometry) because we've never screened this kind of
thing before.  We'll have to wait for a new future incompat feature to
enforce correct behavior, alas.

Note that the geometry reporting always uses the superblock values, not
the incore ones, so that is what xfs_info and xfs_growfs will report.

[1] https://lore.kernel.org/linux-xfs/20191125130744.GA44777@bfoster/T/#m00f9594b511e076e2fcdd489d78bc30216d72a7d

Reported-by: Alex Lyakas <alex@zadara.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
2019-12-19 07:53:48 -08:00
Darrick J. Wong 4f5b1b3a8f xfs: split the sunit parameter update into two parts
If the administrator provided a sunit= mount option, we need to validate
the raw parameter, convert the mount option units (512b blocks) into the
internal unit (fs blocks), and then validate that the (now cooked)
parameter doesn't screw anything up on disk.  The incore inode geometry
computation can depend on the new sunit option, but a subsequent patch
will make validating the cooked value depends on the computed inode
geometry, so break the sunit update into two steps.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
2019-12-19 07:53:48 -08:00
Darrick J. Wong a71895c5da xfs: convert open coded corruption check to use XFS_IS_CORRUPT
Convert the last of the open coded corruption check and report idioms to
use the XFS_IS_CORRUPT macro.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2019-11-13 11:08:01 -08:00
Ian Kent e1d3d21885 xfs: use super s_id instead of struct xfs_mount m_fsname
Eliminate struct xfs_mount field m_fsname by using the super block s_id
field directly.

Signed-off-by: Ian Kent <raven@themaw.net>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-11-05 08:28:25 -08:00
Christoph Hellwig 2fcddee8cd xfs: simplify parsing of allocsize mount option
Rework xfs_parseargs to fill out the default value and then parse the
option directly into the mount structure, similar to what we do for
other updates, and open code the now trivial updates based on on the
on-disk superblock directly into xfs_mountfs.

Note that this change rejects the allocsize=0 mount option that has been
documented as invalid for a long time instead of just ignoring it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-10-29 09:50:13 -07:00
Christoph Hellwig 5da8a07c79 xfs: rename the m_writeio_* fields in struct xfs_mount
Use the allocsize name to match the mount option and usage instead.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-10-29 09:50:12 -07:00
Christoph Hellwig 3cd1d18b0d xfs: remove the m_readio_* fields in struct xfs_mount
m_readio_blocks is entirely unused, and m_readio_blocks is only used in
xfs_stat_blksize in a max statements that is a no-op as it always has
the same value as m_writeio_log.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-10-29 09:50:12 -07:00
Christoph Hellwig b5ad616c3e xfs: don't use a different allocsice for -o wsync
The -o wsync allocsize overwrite overwrite was part of a special hack
for NFSv2 servers in IRIX and has no real purpose in modern Linux, so
remove it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-10-29 09:50:12 -07:00
Austin Kim eb2e99943c xfs: Use WARN_ON_ONCE for bailout mount-operation
If the CONFIG_BUG is enabled, BUG is executed and then system is crashed.
However, the bailout for mount is no longer proceeding.

Using WARN_ON_ONCE rather than BUG can prevent this situation.

Signed-off-by: Austin Kim <austindh.kim@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-09-05 21:36:12 -07:00
Tetsuo Handa 707e0ddaf6 fs: xfs: Remove KM_NOSLEEP and KM_SLEEP.
Since no caller is using KM_NOSLEEP and no callee branches on KM_SLEEP,
we can remove KM_NOSLEEP and replace KM_SLEEP with 0.

Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-08-26 12:06:22 -07:00
Eric Sandeen 250d4b4c40 xfs: remove unused header files
There are many, many xfs header files which are included but
unneeded (or included twice) in the xfs code, so remove them.

nb: xfs_linux.h includes about 9 headers for everyone, so those
explicit includes get removed by this.  I'm not sure what the
preference is, but if we wanted explicit includes everywhere,
a followup patch could remove those xfs_*.h includes from
xfs_linux.h and move them into the files that need them.
Or it could be left as-is.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-06-28 19:30:43 -07:00
Eric Sandeen 8c9ce2f707 xfs: remove unused flags arg from getsb interfaces
The flags value is always passed as 0 so remove the argument.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2019-06-12 08:59:58 -07:00
Darrick J. Wong 490d451fa5 xfs: fix inode_cluster_size rounding mayhem
inode_cluster_size is supposed to represent the size (in bytes) of an
inode cluster buffer.  We avoid having to handle multiple clusters per
filesystem block on filesystems with large blocks by openly rounding
this value up to 1 FSB when necessary.  However, we never reset
inode_cluster_size to reflect this new rounded value, which adds to the
potential for mistakes in calculating geometries.

Fix this by setting inode_cluster_size to reflect the rounded-up size if
needed, and special-case the few places in the sparse inodes code where
we actually need the smaller value to validate on-disk metadata.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2019-06-12 08:37:40 -07:00
Darrick J. Wong 494dba7b27 xfs: refactor inode geometry setup routines
Migrate all of the inode geometry setup code from xfs_mount.c into a
single libxfs function that we can share with xfsprogs.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2019-06-12 08:37:40 -07:00
Darrick J. Wong ef32595999 xfs: separate inode geometry
Separate the inode geometry information into a distinct structure.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2019-06-12 08:37:40 -07:00
Darrick J. Wong ed30dcbd90 xfs: rename the speculative block allocation reclaim toggle functions
"reclaim" is used throughout the icache code to mean reclamation of
incore inode structures.  It's also used for two helper functions that
toggle background deletion of speculative preallocations.  Separate
the second of the two uses to make things less confusing.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2019-04-26 12:28:55 -07:00
Darrick J. Wong 9fe82b8c42 xfs: track delayed allocation reservations across the filesystem
Add a percpu counter to track the number of blocks directly reserved for
delayed allocations on the data device.  This counter (in contrast to
i_delayed_blks) does not track allocated CoW staging extents or anything
going on with the realtime device.  It will be used in the upcoming
summary counter scrub function to check the free block counts without
having to freeze the filesystem or walk all the inodes to find the
delayed allocations.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2019-04-26 12:28:55 -07:00
Darrick J. Wong 519841c207 xfs: clear BAD_SUMMARY if unmounting an unhealthy filesystem
If we know the filesystem metadata isn't healthy during unmount, we want
to encourage the administrator to run xfs_repair right away.  We can't
do this if BAD_SUMMARY will cause an unclean log unmount to force
summary recalculation, so turn it off if the fs is bad.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
2019-04-14 18:15:57 -07:00
Darrick J. Wong 39353ff6e9 xfs: replace the BAD_SUMMARY mount flag with the equivalent health code
Replace the BAD_SUMMARY mount flag with calls to the equivalent health
tracking code.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
2019-04-14 18:15:57 -07:00
Darrick J. Wong 6772c1f112 xfs: track metadata health status
Add the necessary in-core metadata fields to keep track of which parts
of the filesystem have been observed and which parts were observed to be
unhealthy, and print a warning at unmount time if we have unfixed
problems.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
2019-04-14 18:15:57 -07:00
Darrick J. Wong 9b24717979 xfs: cache unlinked pointers in an rhashtable
Use a rhashtable to cache the unlinked list incore.  This should speed
up unlinked processing considerably when there are a lot of inodes on
the unlinked list because iunlink_remove no longer has to traverse an
entire bucket list to find which inode points to the one being removed.

The incore list structure records "X.next_unlinked = Y" relations, with
the rhashtable using Y to index the records.  This makes finding the
inode X that points to a inode Y very quick.  If our cache fails to find
anything we can always fall back on the old method.

FWIW this drastically reduces the amount of time it takes to remove
inodes from the unlinked list.  I wrote a program to open a lot of
O_TMPFILE files and then close them in the same order, which takes
a very long time if we have to traverse the unlinked lists.  With the
ptach, I see:

+ /d/t/tmpfile/tmpfile
Opened 193531 files in 6.33s.
Closed 193531 files in 5.86s

real    0m12.192s
user    0m0.064s
sys     0m11.619s
+ cd /
+ umount /mnt

real    0m0.050s
user    0m0.004s
sys     0m0.030s

And without the patch:

+ /d/t/tmpfile/tmpfile
Opened 193588 files in 6.35s.
Closed 193588 files in 751.61s

real    12m38.853s
user    0m0.084s
sys     12m34.470s
+ cd /
+ umount /mnt

real    0m0.086s
user    0m0.000s
sys     0m0.060s

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
2019-02-11 16:07:01 -08:00
Darrick J. Wong c1b4a321ed xfs: precalculate cluster alignment in inodes and blocks
Store the inode cluster alignment information in units of inodes and
blocks in the mount data so that we don't have to keep recalculating
them.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
2018-12-12 08:47:17 -08:00
Darrick J. Wong 83dcdb4469 xfs: precalculate inodes and blocks per inode cluster
Store the number of inodes and blocks per inode cluster in the mount
data so that we don't have to keep recalculating them.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
2018-12-12 08:47:17 -08:00
Darrick J. Wong 00d22a1c36 xfs: recalculate summary counters at mount time if icount is bad
Since the sb write verifier trips on bad icounts, we should also force a
mount time recalculation of the summary counters if the icount is bad.
This helps us avoid blowing up at freeze/unmount time when the bad
counter gets written back out.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Allison Henderson <allison.henderson@oracle.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2018-08-13 07:58:27 -07:00
Darrick J. Wong ff23f4af7e xfs: move extent busy tree initialization to xfs_initialize_perag
Move the per-AG busy extent tree initialization to the per-ag structure
initialization since we don't want online repair to leak the old tree.
We only deconstruct the tree at unmount time, so this should be safe.
This also enables us to eliminate the commented out initialization in
the xfsprogs libxfs.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2018-07-31 13:18:09 -07:00
Darrick J. Wong 44a8736bd2 xfs: clean up IRELE/iput callsites
Replace the IRELE macro with a proper function so that we can do proper
typechecking and so that we can stop open-coding iput in scrub, which
means that we'll be able to ftrace inode lifetimes going through scrub
correctly.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
2018-07-26 10:15:16 -07:00
Darrick J. Wong f467cad95f xfs: force summary counter recalc at next mount
Use the "bad summary count" mount flag from the previous patch to skip
writing the unmount record to force log recovery at the next mount,
which will recalculate the summary counters for us.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2018-07-23 09:08:01 -07:00
Darrick J. Wong 2e9e6481e2 xfs: detect and fix bad summary counts at mount
Filippo Giunchedi complained that xfs doesn't even perform basic sanity
checks of the fs summary counters at mount time.  Therefore, recalculate
the summary counters from the AGFs after log recovery if the counts were
bad (or we had to recover the fs).  Enhance the recalculation routine to
fail the mount entirely if the new values are also obviously incorrect.

We use a mount state flag to record the "bad summary count" state so
that the (subsequent) online fsck patches can detect subtlely incorrect
counts and set the flag; clear it userspace asks for a repair; or force
a recalculation at the next mount if nobody fixes it by unmount time.

Reported-by: Filippo Giunchedi <fgiunchedi@wikimedia.org>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2018-07-23 09:08:01 -07:00
Dave Chinner 0b61f8a407 xfs: convert to SPDX license tags
Remove the verbose license text from XFS files and replace them
with SPDX tags. This does not change the license of any of the code,
merely refers to the common, up-to-date license files in LICENSES/

This change was mostly scripted. fs/xfs/Makefile and
fs/xfs/libxfs/xfs_fs.h were modified by hand, the rest were detected
and modified by the following command:

for f in `git grep -l "GNU General" fs/xfs/` ; do
	echo $f
	cat $f | awk -f hdr.awk > $f.new
	mv -f $f.new $f
done

And the hdr.awk script that did the modification (including
detecting the difference between GPL-2.0 and GPL-2.0+ licenses)
is as follows:

$ cat hdr.awk
BEGIN {
	hdr = 1.0
	tag = "GPL-2.0"
	str = ""
}

/^ \* This program is free software/ {
	hdr = 2.0;
	next
}

/any later version./ {
	tag = "GPL-2.0+"
	next
}

/^ \*\// {
	if (hdr > 0.0) {
		print "// SPDX-License-Identifier: " tag
		print str
		print $0
		str=""
		hdr = 0.0
		next
	}
	print $0
	next
}

/^ \* / {
	if (hdr > 1.0)
		next
	if (hdr > 0.0) {
		if (str != "")
			str = str "\n"
		str = str $0
		next
	}
	print $0
	next
}

/^ \*/ {
	if (hdr > 0.0)
		next
	print $0
	next
}

// {
	if (hdr > 0.0) {
		if (str != "")
			str = str "\n"
		str = str $0
		next
	}
	print $0
}

END { }
$

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-06-06 14:17:53 -07:00
Dave Chinner 541b5acc85 xfs: verify root inode more thoroughly
When looking up the root inode at mount time, we don't actually do
any verification to check that the inode is allocated and accounted
for correctly in the INOBT. Make the checks on the root inode more
robust by making it an untrusted lookup. This forces the inode
lookup to use the inode btree to verify the inode is allocated
and mapped correctly to disk. This will also have the effect of
catching a significant number of AGI/INOBT related corruptions in
AG 0 at mount time.

Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-06-06 08:10:26 -07:00
Darrick J. Wong d6b636ebb1 xfs: halt auto-reclamation activities while rebuilding rmap
Rebuilding the reverse-mapping tree requires us to quiesce all inodes in
the filesystem, so we must stop background reclamation of post-EOF and
CoW prealloc blocks.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2018-05-15 17:57:05 -07:00
Brian Foster 72c44e35f0 xfs: clean up xfs_mount allocation and dynamic initializers
Most of the generic data structures embedded in xfs_mount are
dynamically initialized immediately after mp is allocated. A few
fields are left out and initialized during the xfs_mountfs()
sequence, after mp has been attached to the superblock.

To clean this up and help prevent premature access of associated
fields, refactor xfs_mount allocation and all dependent init calls
into a new helper. This self-documents that all low level data
structures (i.e., locks, trees, etc.) should be initialized before
xfs_mount is attached to the superblock.

Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-03-26 08:54:15 -07:00
Eric Sandeen 4603fa744c xfs: remove unused m_dmevmask from xfs_mount struct
The dmevmask structure member is a dmapi leftover; it's
set here and there but never actually used.  Remove it.

Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Bill O'Donnell <billodo@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-03-11 20:27:55 -07:00
Xiongwei Song 1da0618993 xfs: destroy mutex pag_ici_reclaim_lock before free
The mutex pag_ici_reclaim_lock of xfs_perag_t structure is initialized in
xfs_initialize_perag. If happen errors in xfs_initialize_perag, or free
resources in xfs_free_perag, wo need to destroy the mutex before free
perag.

Signed-off-by: Xiongwei Song <sxwjean@me.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2018-01-12 14:09:08 -08:00
Darrick J. Wong 2d1d1da3d9 xfs: on failed mount, force-reclaim inodes after unmounting quota controls
When mounting fails, we must force-reclaim inodes (and disable delayed
reclaim) /after/ the realtime and quota control have let go of the
realtime and quota inodes.  Without this, we corrupt the timer list and
cause other weird problems.

Found by xfs/376 fuzzing u3.bmbt[0].lastoff on an rmap filesystem to
force a bogus post-eof extent reclaim that causes the fs to go down.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
2017-11-09 19:27:33 -08:00
Thomas Meyer 749f24f33e xfs: Fix bool initialization/comparison
Bool initializations should use true and false. Bool tests don't need
comparisons.

Signed-off-by: Thomas Meyer <thomas@m3y3r.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-10-11 10:21:06 -07:00
Darrick J. Wong 77aff8c764 xfs: don't leak quotacheck dquots when cow recovery
If we fail a mount on account of cow recovery errors, it's possible that
a previous quotacheck left some dquots in memory.  The bailout clause of
xfs_mountfs forgets to purge these, and so we leak them.  Fix that.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
2017-08-17 12:40:33 -07:00
Darrick J. Wong 8204f8ddaa xfs: clear MS_ACTIVE after finishing log recovery
Way back when we established inode block-map redo log items, it was
discovered that we needed to prevent the VFS from evicting inodes during
log recovery because any given inode might be have bmap redo items to
replay even if the inode has no link count and is ultimately deleted,
and any eviction of an unlinked inode causes the inode to be truncated
and freed too early.

To make this possible, we set MS_ACTIVE so that inodes would not be torn
down immediately upon release.  Unfortunately, this also results in the
quota inodes not being released at all if a later part of the mount
process should fail, because we never reclaim the inodes.  So, set
MS_ACTIVE right before we do the last part of log recovery and clear it
immediately after we finish the log recovery so that everything
will be torn down properly if we abort the mount.

Fixes: 17c12bcd30 ("xfs: when replaying bmap operations, don't let unlinked inodes get reaped")
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
2017-08-17 12:40:33 -07:00
Linus Torvalds 642338ba33 Changes for 4.13:
- Avoid quotacheck deadlocks
 - Fix transaction overflows when bunmapping fragmented files
 - Refactor directory readahead
 - Allow admin to configure if ASSERT is fatal
 - Improve transaction usage detail logging during overflows
 - Minor cleanups
 - Don't leak log items when the log shuts down
 - Remove double-underscore typedefs
 - Various preparation for online scrubbing
 - Introduce new error injection configuration sysfs knobs
 - Refactor dq_get_next to use extent map directly
 - Fix problems with iterating the page cache for unwritten data
 - Implement SEEK_{HOLE,DATA} via iomap
 - Refactor XFS to use iomap SEEK_HOLE and SEEK_DATA
 - Don't use MAXPATHLEN to check on-disk symlink target lengths
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABCgAGBQJZYDw4AAoJEPh/dxk0SrTr2IMP/3JLeygIDtKBBVRPvlCmEXQC
 j8w1C/ntn46zZKQ8l14fAFV4HV2d+KJWf8+yDuPuGdMXJfPeKZf95otYhnSx/9Th
 MvCH7Nzg63yjEGqXpBkfIVr/GT0KTx28lxiqNViChr7XiXWookgf3SSLINO+vU4J
 L2jgLqieJfijiHTBs4qGCQPDwSXVoSOi5XCCQWDYQrXz6DI5UEJc70U53WkH4tRu
 RctOgp1lralwEO0PhfomD3m/Gk94taE/4ZpX/j/5Y4tvH/yh5aY3/KTCLm6+mYT3
 rgMpmg5hmm+UiCTNoTnQ5RxzGZWCfI1I9FZ3HqDsbhmFtaWh32ti0dEEDYsF8Opj
 ARnTty3cRx41LH9dULrVWdwW105AHgwEz8/OZlG0JOca9qzj9GKERMg/hpHINAKN
 TrBlkweg86LWZDy23udZJ/v35svNqSFsqL1yV8j5dXyBi+Yi2CGfU27zbBwnj4Jk
 047l+OuRbBnEOUULqJTEVBY3euoclwl/yQrW2m409s7vPGkGQBLuFCsDKQdnvJ/A
 D7frZqH8XypwnhFOkKybUnBkn4P7vZ2sEuCIZMsrH5k/ys8XyEkaBaOurjvMBOKA
 vLIMD6RXDWrFbOoovfK/stEM6/UFoQkgMhBe7vB9EXk1AjM8NYyWZgp5BkHtytC7
 qa6GRjtGefhc67hbwXJd
 =/GZI
 -----END PGP SIGNATURE-----

Merge tag 'xfs-4.13-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux

Pull XFS updates from Darrick Wong:
 "Here are some changes for you for 4.13. For the most part it's fixes
  for bugs and deadlock problems, and preparation for online fsck in
  some future merge window.

   - Avoid quotacheck deadlocks

   - Fix transaction overflows when bunmapping fragmented files

   - Refactor directory readahead

   - Allow admin to configure if ASSERT is fatal

   - Improve transaction usage detail logging during overflows

   - Minor cleanups

   - Don't leak log items when the log shuts down

   - Remove double-underscore typedefs

   - Various preparation for online scrubbing

   - Introduce new error injection configuration sysfs knobs

   - Refactor dq_get_next to use extent map directly

   - Fix problems with iterating the page cache for unwritten data

   - Implement SEEK_{HOLE,DATA} via iomap

   - Refactor XFS to use iomap SEEK_HOLE and SEEK_DATA

   - Don't use MAXPATHLEN to check on-disk symlink target lengths"

* tag 'xfs-4.13-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (48 commits)
  xfs: don't crash on unexpected holes in dir/attr btrees
  xfs: rename MAXPATHLEN to XFS_SYMLINK_MAXLEN
  xfs: fix contiguous dquot chunk iteration livelock
  xfs: Switch to iomap for SEEK_HOLE / SEEK_DATA
  vfs: Add iomap_seek_hole and iomap_seek_data helpers
  vfs: Add page_cache_seek_hole_data helper
  xfs: remove a whitespace-only line from xfs_fs_get_nextdqblk
  xfs: rewrite xfs_dq_get_next_id using xfs_iext_lookup_extent
  xfs: Check for m_errortag initialization in xfs_errortag_test
  xfs: grab dquots without taking the ilock
  xfs: fix semicolon.cocci warnings
  xfs: Don't clear SGID when inheriting ACLs
  xfs: free cowblocks and retry on buffered write ENOSPC
  xfs: replace log_badcrc_factor knob with error injection tag
  xfs: convert drop_writes to use the errortag mechanism
  xfs: remove unneeded parameter from XFS_TEST_ERROR
  xfs: expose errortag knobs via sysfs
  xfs: make errortag a per-mountpoint structure
  xfs: free uncommitted transactions during log recovery
  xfs: don't allow bmap on rt files
  ...
2017-07-10 10:51:53 -07:00
Linus Torvalds a4c20b9a57 Merge branch 'for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
Pull percpu updates from Tejun Heo:
 "These are the percpu changes for the v4.13-rc1 merge window. There are
  a couple visibility related changes - tracepoints and allocator stats
  through debugfs, along with __ro_after_init markings and a cosmetic
  rename in percpu_counter.

  Please note that the simple O(#elements_in_the_chunk) area allocator
  used by percpu allocator is again showing scalability issues,
  primarily with bpf allocating and freeing large number of counters.
  Dennis is working on the replacement allocator and the percpu
  allocator will be seeing increased churns in the coming cycles"

* 'for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu:
  percpu: fix static checker warnings in pcpu_destroy_chunk
  percpu: fix early calls for spinlock in pcpu_stats
  percpu: resolve err may not be initialized in pcpu_alloc
  percpu_counter: Rename __percpu_counter_add to percpu_counter_add_batch
  percpu: add tracepoint support for percpu memory
  percpu: expose statistics about percpu memory via debugfs
  percpu: migrate percpu data structures to internal header
  percpu: add missing lockdep_assert_held to func pcpu_free_area
  mark most percpu globals as __ro_after_init
2017-07-06 08:59:41 -07:00
Darrick J. Wong 31965ef348 xfs: make errortag a per-mountpoint structure
Remove the xfs_etest structure in favor of a per-mountpoint structure.
This will give us the flexibility to set as many error injection points
as we want, and later enable us to set up sysfs knobs to set the trigger
frequency as we wish.  This comes at a cost of higher memory use, but
unti we hit 1024 injection points (we're at 29) or a lot of mounts this
shouldn't be a huge issue.

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
2017-06-27 18:23:19 -07:00
Nikolay Borisov 104b4e5139 percpu_counter: Rename __percpu_counter_add to percpu_counter_add_batch
Currently, percpu_counter_add is a wrapper around __percpu_counter_add
which is preempt safe due to explicit calls to preempt_disable.  Given
how __ prefix is used in percpu related interfaces, the naming
unfortunately creates the false sense that __percpu_counter_add is
less safe than percpu_counter_add.  In terms of context-safety,
they're equivalent.  The only difference is that the __ version takes
a batch parameter.

Make this a bit more explicit by just renaming __percpu_counter_add to
percpu_counter_add_batch.

This patch doesn't cause any functional changes.

tj: Minor updates to patch description for clarity.  Cosmetic
    indentation updates.

Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Chris Mason <clm@fb.com>
Cc: Josef Bacik <jbacik@fb.com>
Cc: David Sterba <dsterba@suse.com>
Cc: Darrick J. Wong <darrick.wong@oracle.com>
Cc: Jan Kara <jack@suse.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: linux-mm@kvack.org
Cc: "David S. Miller" <davem@davemloft.net>
2017-06-20 15:42:32 -04:00
Darrick J. Wong c8ce540db5 xfs: remove double-underscore integer types
This is a purely mechanical patch that removes the private
__{u,}int{8,16,32,64}_t typedefs in favor of using the system
{u,}int{8,16,32,64}_t typedefs.  This is the sed script used to perform
the transformation and fix the resulting whitespace and indentation
errors:

s/typedef\t__uint8_t/typedef __uint8_t\t/g
s/typedef\t__uint/typedef __uint/g
s/typedef\t__int\([0-9]*\)_t/typedef int\1_t\t/g
s/__uint8_t\t/__uint8_t\t\t/g
s/__uint/uint/g
s/__int\([0-9]*\)_t\t/__int\1_t\t\t/g
s/__int/int/g
/^typedef.*int[0-9]*_t;$/d

Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
2017-06-19 14:11:33 -07:00
Christoph Hellwig 85787090a2 fs: switch ->s_uuid to uuid_t
For some file systems we still memcpy into it, but in various places this
already allows us to use the proper uuid helpers.  More to come..

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Acked-by: Mimi Zohar <zohar@linux.vnet.ibm.com> (Changes to IMA/EVM)
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-06-05 16:59:12 +02:00
Amir Goldstein d905fdaaa7 xfs: use the common helper uuid_is_null()
Use the common helper uuid_is_null() and remove the xfs specific
helper uuid_is_nil().

The common helper does not check for the NULL pointer value as
xfs helper did, but xfs code never calls the helper with a pointer
that can be NULL.

Conform comments and warning strings to use the term 'null uuid'
instead of 'nil uuid', because this is the terminology used by
lib/uuid.c and its users. It is also the terminology used in
userspace by libuuid and xfsprogs.

Signed-off-by: Amir Goldstein <amir73il@gmail.com>
[hch: remove now unused uuid.[ch]]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
2017-06-05 16:59:08 +02:00
Christoph Hellwig cb0ba6cc22 xfs: remove uuid_getnodeuniq and xfs_uu_t
Opencode uuid_getnodeuniq in the only caller, and directly decode
the uuid_t representation instead of using a structure cast for it.

Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-05 16:59:07 +02:00
Amir Goldstein 8f720d9f89 xfs: publish UUID in struct super_block
Copy the uuid of the filesystem to struct super_block s_uuid field,
as several other filesystems already do.  Copy regardless of the nouuid
mount option, because other filesystems also do not guaranty uniqueness
of the s_uuid field in super_block struct.

Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-04-28 08:10:53 -07:00
Chandan Rajendra d5825712ee xfs: Use xfs_icluster_size_fsb() to calculate inode alignment mask
When block size is larger than inode cluster size, the call to
XFS_B_TO_FSBT(mp, mp->m_inode_cluster_size) returns 0. Also, mkfs.xfs
would have set xfs_sb->sb_inoalignmt to 0. Hence in
xfs_set_inoalignment(), xfs_mount->m_inoalign_mask gets initialized to
-1 instead of 0. However, xfs_mount->m_sinoalign would get correctly
intialized to 0 because for every positive value of xfs_mount->m_dalign,
the condition "!(mp->m_dalign & mp->m_inoalign_mask)" would evaluate to
false.

Also, xfs_imap() worked fine even with xfs_mount->m_inoalign_mask having
-1 as the value because blks_per_cluster variable would have the value 1
and hence we would never have a need to use xfs_mount->m_inoalign_mask
to compute the inode chunk's agbno and offset within the chunk.

Signed-off-by: Chandan Rajendra <chandan@linux.vnet.ibm.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-03-07 20:10:50 -08:00
Christoph Hellwig 4560e78f40 xfs: don't block the log commit handler for discards
Instead we submit the discard requests and use another workqueue to
release the extents from the extent busy list.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-02-09 11:36:40 -08:00
Christoph Hellwig ebf5587261 xfs: improve handling of busy extents in the low-level allocator
Currently we force the log and simply try again if we hit a busy extent,
but especially with online discard enabled it might take a while after
the log force for the busy extents to disappear, and we might have
already completed our second pass.

So instead we add a new waitqueue and a generation counter to the pag
structure so that we can do wakeups once we've removed busy extents,
and we replace the single retry with an unconditional one - after
all we hold the AGF buffer lock, so no other allocations or frees
can be racing with us in this AG.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
2017-02-09 10:50:25 -08:00