The writeback rework in commit fbcc025613 ("xfs: Introduce
writeback context for writepages") introduced a subtle change in
behavior with regard to the block mapping used across the
->writepages() sequence. The previous xfs_cluster_write() code would
only flush pages up to EOF at the time of the writepage, thus
ensuring that any pages due to file-extending writes would be
handled on a separate cycle and with a new, updated block mapping.
The updated code establishes a block mapping in xfs_writepage_map()
that could extend beyond EOF if the file has post-eof preallocation.
Because we now use the generic writeback infrastructure and pass the
cached mapping to each writepage call, there is no implicit EOF
limit in place. If eofblocks trimming occurs during ->writepages(),
any post-eof portion of the cached mapping becomes invalid. The
eofblocks code has no means to serialize against writeback because
there are no pages associated with post-eof blocks. Therefore if an
eofblocks trim occurs and is followed by a file-extending buffered
write, not only has the mapping become invalid, but we could end up
writing a page to disk based on the invalid mapping.
Consider the following sequence of events:
- A buffered write creates a delalloc extent and post-eof
speculative preallocation.
- Writeback starts and on the first writepage cycle, the delalloc
extent is converted to real blocks (including the post-eof blocks)
and the mapping is cached.
- The file is closed and xfs_release() trims post-eof blocks. The
cached writeback mapping is now invalid.
- Another buffered write appends the file with a delalloc extent.
- The concurrent writeback cycle picks up the just written page
because the writeback range end is LLONG_MAX. xfs_writepage_map()
attributes it to the (now invalid) cached mapping and writes the
data to an incorrect location on disk (and where the file offset is
still backed by a delalloc extent).
This problem is reproduced by xfstests test generic/464, which
triggers racing writes, appends, open/closes and writeback requests.
To address this problem, trim the mapping used during writeback to
within EOF when the mapping is validated. This ensures the mapping
is revalidated for any pages encountered beyond EOF as of the time
the current mapping was cached or last validated.
Reported-by: Eryu Guan <eguan@redhat.com>
Diagnosed-by: Eryu Guan <eguan@redhat.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Recently we've had warnings arise from the vm handing us pages
without bufferheads attached to them. This should not ever occur
in XFS, but we don't defend against it properly if it does. The only
place where we remove bufferheads from a page is in
xfs_vm_releasepage(), but we can't tell the difference here between
"page is dirty so don't release" and "page is dirty but is being
invalidated so release it".
In some places that are invalidating pages ask for pages to be
released and follow up afterward calling ->releasepage by checking
whether the page was dirty and then aborting the invalidation. This
is a possible vector for releasing buffers from a page but then
leaving it in the mapping, so we really do need to avoid dirty pages
in xfs_vm_releasepage().
To differentiate between invalidated pages and normal pages, we need
to clear the page dirty flag when invalidating the pages. This can
be done through xfs_vm_invalidatepage(), and will result
xfs_vm_releasepage() seeing the page as clean which matches the
bufferhead state on the page after calling block_invalidatepage().
Hence we can re-add the page dirty check in xfs_vm_releasepage to
catch the case where we might be releasing a page that is actually
dirty and so should not have the bufferheads on it removed. This
will remove one possible vector of "dirty page with no bufferheads"
and so help narrow down the search for the root cause of that
problem.
Signed-Off-By: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Since commit d531d91d69 ("xfs: always use unwritten extents for
direct I/O writes"), we start allocating unwritten extents for all
direct writes to allow appending aio in XFS.
But for dio writes that could extend file size we update the in-core
inode size first, then convert the unwritten extents to real
allocations at dio completion time in xfs_dio_write_end_io(). Thus a
racing direct read could see the new i_size and find the unwritten
extents first and read zeros instead of actual data, if the direct
writer also takes a shared iolock.
Fix it by updating the in-core inode size after the unwritten extent
conversion. To do this, introduce a new boolean argument to
xfs_iomap_write_unwritten() to tell if we want to update in-core
i_size or not.
Suggested-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Eryu Guan <eguan@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
* Media error handling support in the Block Translation Table (BTT)
driver is reworked to address sleeping-while-atomic locking and
memory-allocation-context conflicts.
* The dax_device lookup overhead for xfs and ext4 is moved out of the
iomap hot-path to a mount-time lookup.
* A new 'ecc_unit_size' sysfs attribute is added to advertise the
read-modify-write boundary property of a persistent memory range.
* Preparatory fix-ups for arm and powerpc pmem support are included
along with other miscellaneous fixes.
-----BEGIN PGP SIGNATURE-----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=5iGY
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm from Dan Williams:
"A rework of media error handling in the BTT driver and other updates.
It has appeared in a few -next releases and collected some late-
breaking build-error and warning fixups as a result.
Summary:
- Media error handling support in the Block Translation Table (BTT)
driver is reworked to address sleeping-while-atomic locking and
memory-allocation-context conflicts.
- The dax_device lookup overhead for xfs and ext4 is moved out of the
iomap hot-path to a mount-time lookup.
- A new 'ecc_unit_size' sysfs attribute is added to advertise the
read-modify-write boundary property of a persistent memory range.
- Preparatory fix-ups for arm and powerpc pmem support are included
along with other miscellaneous fixes"
* tag 'libnvdimm-for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: (26 commits)
libnvdimm, btt: fix format string warnings
libnvdimm, btt: clean up warning and error messages
ext4: fix null pointer dereference on sbi
libnvdimm, nfit: move the check on nd_reserved2 to the endpoint
dax: fix FS_DAX=n BLOCK=y compilation
libnvdimm: fix integer overflow static analysis warning
libnvdimm, nd_blk: remove mmio_flush_range()
libnvdimm, btt: rework error clearing
libnvdimm: fix potential deadlock while clearing errors
libnvdimm, btt: cache sector_size in arena_info
libnvdimm, btt: ensure that flags were also unchanged during a map_read
libnvdimm, btt: refactor map entry operations with macros
libnvdimm, btt: fix a missed NVDIMM_IO_ATOMIC case in the write path
libnvdimm, nfit: export an 'ecc_unit_size' sysfs attribute
ext4: perform dax_device lookup at mount
ext2: perform dax_device lookup at mount
xfs: perform dax_device lookup at mount
dax: introduce a fs_dax_get_by_bdev() helper
libnvdimm, btt: check memory allocation failure
libnvdimm, label: fix index block size calculation
...
Pull block layer updates from Jens Axboe:
"This is the first pull request for 4.14, containing most of the code
changes. It's a quiet series this round, which I think we needed after
the churn of the last few series. This contains:
- Fix for a registration race in loop, from Anton Volkov.
- Overflow complaint fix from Arnd for DAC960.
- Series of drbd changes from the usual suspects.
- Conversion of the stec/skd driver to blk-mq. From Bart.
- A few BFQ improvements/fixes from Paolo.
- CFQ improvement from Ritesh, allowing idling for group idle.
- A few fixes found by Dan's smatch, courtesy of Dan.
- A warning fixup for a race between changing the IO scheduler and
device remova. From David Jeffery.
- A few nbd fixes from Josef.
- Support for cgroup info in blktrace, from Shaohua.
- Also from Shaohua, new features in the null_blk driver to allow it
to actually hold data, among other things.
- Various corner cases and error handling fixes from Weiping Zhang.
- Improvements to the IO stats tracking for blk-mq from me. Can
drastically improve performance for fast devices and/or big
machines.
- Series from Christoph removing bi_bdev as being needed for IO
submission, in preparation for nvme multipathing code.
- Series from Bart, including various cleanups and fixes for switch
fall through case complaints"
* 'for-4.14/block' of git://git.kernel.dk/linux-block: (162 commits)
kernfs: checking for IS_ERR() instead of NULL
drbd: remove BIOSET_NEED_RESCUER flag from drbd_{md_,}io_bio_set
drbd: Fix allyesconfig build, fix recent commit
drbd: switch from kmalloc() to kmalloc_array()
drbd: abort drbd_start_resync if there is no connection
drbd: move global variables to drbd namespace and make some static
drbd: rename "usermode_helper" to "drbd_usermode_helper"
drbd: fix race between handshake and admin disconnect/down
drbd: fix potential deadlock when trying to detach during handshake
drbd: A single dot should be put into a sequence.
drbd: fix rmmod cleanup, remove _all_ debugfs entries
drbd: Use setup_timer() instead of init_timer() to simplify the code.
drbd: fix potential get_ldev/put_ldev refcount imbalance during attach
drbd: new disk-option disable-write-same
drbd: Fix resource role for newly created resources in events2
drbd: mark symbols static where possible
drbd: Send P_NEG_ACK upon write error in protocol != C
drbd: add explicit plugging when submitting batches
drbd: change list_for_each_safe to while(list_first_entry_or_null)
drbd: introduce drbd_recv_header_maybe_unplug
...
Our loop in xfs_finish_page_writeback, which iterates over all buffer
heads in a page and then calls end_buffer_async_write, which also
iterates over all buffers in the page to check if any I/O is in flight
is not only inefficient, but also potentially dangerous as
end_buffer_async_write can cause the page and all buffers to be freed.
Replace it with a single loop that does the work of end_buffer_async_write
on a per-page basis.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
The ->iomap_begin() operation is a hot path, so cache the
fs_dax_get_by_host() result at mount time to avoid the incurring the
hash lookup overhead on a per-i/o basis.
Reported-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
This way we don't need a block_device structure to submit I/O. The
block_device has different life time rules from the gendisk and
request_queue and is usually only available when the block device node
is open. Other callers need to explicitly create one (e.g. the lightnvm
passthrough code, or the new nvme multipathing code).
For the actual I/O path all that we need is the gendisk, which exists
once per block device. But given that the block layer also does
partition remapping we additionally need a partition index, which is
used for said remapping in generic_make_request.
Note that all the block drivers generally want request_queue or
sometimes the gendisk, so this removes a layer of indirection all
over the stack.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
- Avoid quotacheck deadlocks
- Fix transaction overflows when bunmapping fragmented files
- Refactor directory readahead
- Allow admin to configure if ASSERT is fatal
- Improve transaction usage detail logging during overflows
- Minor cleanups
- Don't leak log items when the log shuts down
- Remove double-underscore typedefs
- Various preparation for online scrubbing
- Introduce new error injection configuration sysfs knobs
- Refactor dq_get_next to use extent map directly
- Fix problems with iterating the page cache for unwritten data
- Implement SEEK_{HOLE,DATA} via iomap
- Refactor XFS to use iomap SEEK_HOLE and SEEK_DATA
- Don't use MAXPATHLEN to check on-disk symlink target lengths
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=/GZI
-----END PGP SIGNATURE-----
Merge tag 'xfs-4.13-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull XFS updates from Darrick Wong:
"Here are some changes for you for 4.13. For the most part it's fixes
for bugs and deadlock problems, and preparation for online fsck in
some future merge window.
- Avoid quotacheck deadlocks
- Fix transaction overflows when bunmapping fragmented files
- Refactor directory readahead
- Allow admin to configure if ASSERT is fatal
- Improve transaction usage detail logging during overflows
- Minor cleanups
- Don't leak log items when the log shuts down
- Remove double-underscore typedefs
- Various preparation for online scrubbing
- Introduce new error injection configuration sysfs knobs
- Refactor dq_get_next to use extent map directly
- Fix problems with iterating the page cache for unwritten data
- Implement SEEK_{HOLE,DATA} via iomap
- Refactor XFS to use iomap SEEK_HOLE and SEEK_DATA
- Don't use MAXPATHLEN to check on-disk symlink target lengths"
* tag 'xfs-4.13-merge-5' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (48 commits)
xfs: don't crash on unexpected holes in dir/attr btrees
xfs: rename MAXPATHLEN to XFS_SYMLINK_MAXLEN
xfs: fix contiguous dquot chunk iteration livelock
xfs: Switch to iomap for SEEK_HOLE / SEEK_DATA
vfs: Add iomap_seek_hole and iomap_seek_data helpers
vfs: Add page_cache_seek_hole_data helper
xfs: remove a whitespace-only line from xfs_fs_get_nextdqblk
xfs: rewrite xfs_dq_get_next_id using xfs_iext_lookup_extent
xfs: Check for m_errortag initialization in xfs_errortag_test
xfs: grab dquots without taking the ilock
xfs: fix semicolon.cocci warnings
xfs: Don't clear SGID when inheriting ACLs
xfs: free cowblocks and retry on buffered write ENOSPC
xfs: replace log_badcrc_factor knob with error injection tag
xfs: convert drop_writes to use the errortag mechanism
xfs: remove unneeded parameter from XFS_TEST_ERROR
xfs: expose errortag knobs via sysfs
xfs: make errortag a per-mountpoint structure
xfs: free uncommitted transactions during log recovery
xfs: don't allow bmap on rt files
...
Pull core block/IO updates from Jens Axboe:
"This is the main pull request for the block layer for 4.13. Not a huge
round in terms of features, but there's a lot of churn related to some
core cleanups.
Note this depends on the UUID tree pull request, that Christoph
already sent out.
This pull request contains:
- A series from Christoph, unifying the error/stats codes in the
block layer. We now use blk_status_t everywhere, instead of using
different schemes for different places.
- Also from Christoph, some cleanups around request allocation and IO
scheduler interactions in blk-mq.
- And yet another series from Christoph, cleaning up how we handle
and do bounce buffering in the block layer.
- A blk-mq debugfs series from Bart, further improving on the support
we have for exporting internal information to aid debugging IO
hangs or stalls.
- Also from Bart, a series that cleans up the request initialization
differences across types of devices.
- A series from Goldwyn Rodrigues, allowing the block layer to return
failure if we will block and the user asked for non-blocking.
- Patch from Hannes for supporting setting loop devices block size to
that of the underlying device.
- Two series of patches from Javier, fixing various issues with
lightnvm, particular around pblk.
- A series from me, adding support for write hints. This comes with
NVMe support as well, so applications can help guide data placement
on flash to improve performance, latencies, and write
amplification.
- A series from Ming, improving and hardening blk-mq support for
stopping/starting and quiescing hardware queues.
- Two pull requests for NVMe updates. Nothing major on the feature
side, but lots of cleanups and bug fixes. From the usual crew.
- A series from Neil Brown, greatly improving the bio rescue set
support. Most notably, this kills the bio rescue work queues, if we
don't really need them.
- Lots of other little bug fixes that are all over the place"
* 'for-4.13/block' of git://git.kernel.dk/linux-block: (217 commits)
lightnvm: pblk: set line bitmap check under debug
lightnvm: pblk: verify that cache read is still valid
lightnvm: pblk: add initialization check
lightnvm: pblk: remove target using async. I/Os
lightnvm: pblk: use vmalloc for GC data buffer
lightnvm: pblk: use right metadata buffer for recovery
lightnvm: pblk: schedule if data is not ready
lightnvm: pblk: remove unused return variable
lightnvm: pblk: fix double-free on pblk init
lightnvm: pblk: fix bad le64 assignations
nvme: Makefile: remove dead build rule
blk-mq: map all HWQ also in hyperthreaded system
nvmet-rdma: register ib_client to not deadlock in device removal
nvme_fc: fix error recovery on link down.
nvmet_fc: fix crashes on bad opcodes
nvme_fc: Fix crash when nvme controller connection fails.
nvme_fc: replace ioabort msleep loop with completion
nvme_fc: fix double calls to nvme_cleanup_cmd()
nvme-fabrics: verify that a controller returns the correct NQN
nvme: simplify nvme_dev_attrs_are_visible
...
Reviewed-by: Andreas Dilger <adilger@dilger.ca>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
bmap returns a dumb LBA address but not the block device that goes with
that LBA. Swapfiles don't care about this and will blindly assume that
the data volume is the correct blockdev, which is totally bogus for
files on the rt subvolume. This results in the swap code doing IOs to
arbitrary locations on the data device(!) if the passed in mapping is a
realtime file, so just turn off bmap for rt files.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
bmap returns a dumb LBA address but not the block device that goes with
that LBA. Swapfiles don't care about this and will blindly assume that
the data volume is the correct blockdev, which is totally bogus for
files on the rt subvolume. This results in the swap code doing IOs to
arbitrary locations on the data device(!) if the passed in mapping is a
realtime file, so just turn off bmap for rt files.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
This is a purely mechanical patch that removes the private
__{u,}int{8,16,32,64}_t typedefs in favor of using the system
{u,}int{8,16,32,64}_t typedefs. This is the sed script used to perform
the transformation and fix the resulting whitespace and indentation
errors:
s/typedef\t__uint8_t/typedef __uint8_t\t/g
s/typedef\t__uint/typedef __uint/g
s/typedef\t__int\([0-9]*\)_t/typedef int\1_t\t/g
s/__uint8_t\t/__uint8_t\t\t/g
s/__uint/uint/g
s/__int\([0-9]*\)_t\t/__int\1_t\t\t/g
s/__int/int/g
/^typedef.*int[0-9]*_t;$/d
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Replace bi_error with a new bi_status to allow for a clear conversion.
Note that device mapper overloaded bi_error with a private value, which
we'll have to keep arround at least for now and thus propagate to a
proper blk_status_t value.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
- various code cleanups
- introduce GETFSMAP ioctl
- various refactoring
- avoid dio reads past eof
- fix memory corruption and other errors with fragmented directory blocks
- fix accidental userspace memory corruptions
- publish fs uuid in superblock
- make fstrim terminatable
- fix race between quotaoff and in-core inode creation
- Avoid use-after-free when finishing up w/ buffer heads
- Reserve enough space to handle bmap tree resizing during cow remap
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=oKCc
-----END PGP SIGNATURE-----
Merge tag 'xfs-4.12-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs updates from Darrick Wong:
"Here are the XFS changes for 4.12. The big new feature for this
release is the new space mapping ioctl that we've been discussing
since LSF2016, but other than that most of the patches are larger bug
fixes, memory corruption prevention, and other cleanups.
Summary:
- various code cleanups
- introduce GETFSMAP ioctl
- various refactoring
- avoid dio reads past eof
- fix memory corruption and other errors with fragmented directory blocks
- fix accidental userspace memory corruptions
- publish fs uuid in superblock
- make fstrim terminatable
- fix race between quotaoff and in-core inode creation
- avoid use-after-free when finishing up w/ buffer heads
- reserve enough space to handle bmap tree resizing during cow remap"
* tag 'xfs-4.12-merge-7' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (53 commits)
xfs: fix use-after-free in xfs_finish_page_writeback
xfs: reserve enough blocks to handle btree splits when remapping
xfs: wait on new inodes during quotaoff dquot release
xfs: update ag iterator to support wait on new inodes
xfs: support ability to wait on new inodes
xfs: publish UUID in struct super_block
xfs: Allow user to kill fstrim process
xfs: better log intent item refcount checking
xfs: fix up quotacheck buffer list error handling
xfs: remove xfs_trans_ail_delete_bulk
xfs: don't use bool values in trace buffers
xfs: fix getfsmap userspace memory corruption while setting OF_LAST
xfs: fix __user annotations for xfs_ioc_getfsmap
xfs: corruption needs to respect endianess too!
xfs: use NULL instead of 0 to initialize a pointer in xfs_ioc_getfsmap
xfs: use NULL instead of 0 to initialize a pointer in xfs_getfsmap
xfs: simplify validation of the unwritten extent bit
xfs: remove unused values from xfs_exntst_t
xfs: remove the unused XFS_MAXLINK_1 define
xfs: more do_div cleanups
...
xfs has defined PF_FSTRANS to declare a scope GFP_NOFS semantic quite
some time ago. We would like to make this concept more generic and use
it for other filesystems as well. Let's start by giving the flag a more
generic name PF_MEMALLOC_NOFS which is in line with an exiting
PF_MEMALLOC_NOIO already used for the same purpose for GFP_NOIO
contexts. Replace all PF_FSTRANS usage from the xfs code in the first
step before we introduce a full API for it as xfs uses the flag directly
anyway.
This patch doesn't introduce any functional change.
Link: http://lkml.kernel.org/r/20170306131408.9828-4-mhocko@kernel.org
Signed-off-by: Michal Hocko <mhocko@suse.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Chris Mason <clm@fb.com>
Cc: David Sterba <dsterba@suse.cz>
Cc: Jan Kara <jack@suse.cz>
Cc: Nikolay Borisov <nborisov@suse.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Opencoding the trivial checks makes it much easier to read (and grep..).
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
This checks for all the non-normal extent types, including handling both
encodings of delayed allocations.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
There are two different cases of buffered I/O errors:
- first we can have an already shutdown fs. In that case we should skip
any on-disk operations and just clean up the appen transaction if
present and destroy the ioend
- a real I/O error. In that case we should cleanup any lingering COW
blocks. This gets skipped in the current code and is fixed by this
patch.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
We only want to reclaim preallocations from our periodic work item.
Currently this is archived by looking for a dirty inode, but that check
is rather fragile. Instead add a flag to xfs_reflink_cancel_cow_* so
that the caller can ask for just cancelling unwritten extents in the COW
fork.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
[darrick: fix typos in commit message]
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Replace all 1 << inode->i_blkbits and (1 << inode->i_blkbits) in fs
branch.
This patch also fixes multiple checkpatch warnings: WARNING: Prefer
'unsigned int' to bare use of 'unsigned'
Thanks to Andrew Morton for suggesting more appropriate function instead
of macro.
[geliangtang@gmail.com: truncate: use i_blocksize()]
Link: http://lkml.kernel.org/r/9c8b2cd83c8f5653805d43debde9fa8817e02fc4.1484895804.git.geliangtang@gmail.com
Link: http://lkml.kernel.org/r/1481319905-10126-1-git-send-email-fabf@skynet.be
Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Christoph Hellwig pointed out that there's a potentially nasty race when
performing simultaneous nearby directio cow writes:
"Thread 1 writes a range from B to c
" B --------- C
p
"a little later thread 2 writes from A to B
" A --------- B
p
[editor's note: the 'p' denote cowextsize boundaries, which I added to
make this more clear]
"but the code preallocates beyond B into the range where thread
"1 has just written, but ->end_io hasn't been called yet.
"But once ->end_io is called thread 2 has already allocated
"up to the extent size hint into the write range of thread 1,
"so the end_io handler will splice the unintialized blocks from
"that preallocation back into the file right after B."
We can avoid this race by ensuring that thread 1 cannot accidentally
remap the blocks that thread 2 allocated (as part of speculative
preallocation) as part of t2's write preparation in t1's end_io handler.
The way we make this happen is by taking advantage of the unwritten
extent flag as an intermediate step.
Recall that when we begin the process of writing data to shared blocks,
we create a delayed allocation extent in the CoW fork:
D: --RRRRRRSSSRRRRRRRR---
C: ------DDDDDDD---------
When a thread prepares to CoW some dirty data out to disk, it will now
convert the delalloc reservation into an /unwritten/ allocated extent in
the cow fork. The da conversion code tries to opportunistically
allocate as much of a (speculatively prealloc'd) extent as possible, so
we may end up allocating a larger extent than we're actually writing
out:
D: --RRRRRRSSSRRRRRRRR---
U: ------UUUUUUU---------
Next, we convert only the part of the extent that we're actively
planning to write to normal (i.e. not unwritten) status:
D: --RRRRRRSSSRRRRRRRR---
U: ------UURRUUU---------
If the write succeeds, the end_cow function will now scan the relevant
range of the CoW fork for real extents and remap only the real extents
into the data fork:
D: --RRRRRRRRSRRRRRRRR---
U: ------UU--UUU---------
This ensures that we never obliterate valid data fork extents with
unwritten blocks from the CoW fork.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Commit 99579ccec4 "xfs: skip dirty pages in ->releasepage()" started
to skip dirty pages in xfs_vm_releasepage() which also has the effect
that if a dirty page is truncated, it does not get freed by
block_invalidatepage() and is lingering in LRU list waiting for reclaim.
So a simple loop like:
while true; do
dd if=/dev/zero of=file bs=1M count=100
rm file
done
will keep using more and more memory until we hit low watermarks and
start pagecache reclaim which will eventually reclaim also the truncate
pages. Keeping these truncated (and thus never usable) pages in memory
is just a waste of memory, is unnecessarily stressing page cache
reclaim, and reportedly also leads to anonymous mmap(2) returning ENOMEM
prematurely.
So instead of just skipping dirty pages in xfs_vm_releasepage(), return
to old behavior of skipping them only if they have delalloc or unwritten
buffers and fix the spurious warnings by warning only if the page is
clean.
CC: stable@vger.kernel.org
CC: Brian Foster <bfoster@redhat.com>
CC: Vlastimil Babka <vbabka@suse.cz>
Reported-by: Petr Tůma <petr.tuma@d3s.mff.cuni.cz>
Fixes: 99579ccec4
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Contained in this update:
- DAX PMD vaults via iomap infrastructure
- Direct-io support in iomap infrastructure
- removal of now-redundant XFS inode iolock, replaced with VFS i_rwsem
- synchronisation with fixes and changes in userspace libxfs code
- extent tree lookup helpers
- lots of little corruption detection improvements to verifiers
- optimised CRC calculations
- faster buffer cache lookups
- deprecation of barrier/nobarrier mount options - we always use
REQ_FUA/REQ_FLUSH where appropriate for data integrity now
- cleanups to speculative preallocation
- miscellaneous minor bug fixes and cleanups
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=HwDG
-----END PGP SIGNATURE-----
Merge tag 'xfs-for-linus-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs
Pull xfs updates from Dave Chinner:
"There is quite a varied bunch of stuff in this update, and some of it
you will have already merged through the ext4 tree which imported the
dax-4.10-iomap-pmd topic branch from the XFS tree.
There is also a new direct IO implementation that uses the iomap
infrastructure. It's much simpler, faster, and has lower IO latency
than the existing direct IO infrastructure.
Summary:
- DAX PMD faults via iomap infrastructure
- Direct-io support in iomap infrastructure
- removal of now-redundant XFS inode iolock, replaced with VFS
i_rwsem
- synchronisation with fixes and changes in userspace libxfs code
- extent tree lookup helpers
- lots of little corruption detection improvements to verifiers
- optimised CRC calculations
- faster buffer cache lookups
- deprecation of barrier/nobarrier mount options - we always use
REQ_FUA/REQ_FLUSH where appropriate for data integrity now
- cleanups to speculative preallocation
- miscellaneous minor bug fixes and cleanups"
* tag 'xfs-for-linus-4.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (63 commits)
xfs: nuke unused tracepoint definitions
xfs: use GPF_NOFS when allocating btree cursors
xfs: use xfs_vn_setattr_size to check on new size
xfs: deprecate barrier/nobarrier mount option
xfs: Always flush caches when integrity is required
xfs: ignore leaf attr ichdr.count in verifier during log replay
xfs: use rhashtable to track buffer cache
xfs: optimise CRC updates
xfs: make xfs btree stats less huge
xfs: don't cap maximum dedupe request length
xfs: don't allow di_size with high bit set
xfs: error out if trying to add attrs and anextents > 0
xfs: don't crash if reading a directory results in an unexpected hole
xfs: complain if we don't get nextents bmap records
xfs: check for bogus values in btree block headers
xfs: forbid AG btrees with level == 0
xfs: several xattr functions can be void
xfs: handle cow fork in xfs_bmap_trace_exlist
xfs: pass state not whichfork to trace_xfs_extlist
xfs: Move AGI buffer type setting to xfs_read_agi
...
needed for both ext4 and xfs dax changes to use iomap for DAX. It
also includes the fscrypt branch which is needed for ubifs encryption
work as well as ext4 encryption and fscrypt cleanups.
Lots of cleanups and bug fixes, especially making sure ext4 is robust
against maliciously corrupted file systems --- especially maliciously
corrupted xattr blocks and a maliciously corrupted superblock. Also
fix ext4 support for 64k block sizes so it works well on ppcle. Fixed
mbcache so we don't miss some common xattr blocks that can be merged.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAlhQQVEACgkQ8vlZVpUN
gaN9TQgAoCD+V4kJjMCFhiV8u6QR3hqD6bOZbggo5wJf4CHglWkmrbAmc3jANOgH
CKsXDRRjxuDjPXf1ukB1i4M7ArLYjkbbzKdsu7lismoJLS+w8uwUKSNdep+LYMjD
alxUcf5DCzLlUmdOdW4yE22L+CwRfqfs8IpBvKmJb7DrAKiwJVA340ys6daBGuu1
63xYx0QIyPzq0xjqLb6TVf88HUI4NiGVXmlm2wcrnYd5966hEZd/SztOZTVCVWOf
Z0Z0fGQ1WJzmaBB9+YV3aBi+BObOx4m2PUprIa531+iEW02E+ot5Xd4vVQFoV/r4
NX3XtoBrT1XlKagy2sJLMBoCavqrKw==
=j4KP
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"This merge request includes the dax-4.0-iomap-pmd branch which is
needed for both ext4 and xfs dax changes to use iomap for DAX. It also
includes the fscrypt branch which is needed for ubifs encryption work
as well as ext4 encryption and fscrypt cleanups.
Lots of cleanups and bug fixes, especially making sure ext4 is robust
against maliciously corrupted file systems --- especially maliciously
corrupted xattr blocks and a maliciously corrupted superblock. Also
fix ext4 support for 64k block sizes so it works well on ppcle. Fixed
mbcache so we don't miss some common xattr blocks that can be merged"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (86 commits)
dax: Fix sleep in atomic contex in grab_mapping_entry()
fscrypt: Rename FS_WRITE_PATH_FL to FS_CTX_HAS_BOUNCE_BUFFER_FL
fscrypt: Delay bounce page pool allocation until needed
fscrypt: Cleanup page locking requirements for fscrypt_{decrypt,encrypt}_page()
fscrypt: Cleanup fscrypt_{decrypt,encrypt}_page()
fscrypt: Never allocate fscrypt_ctx on in-place encryption
fscrypt: Use correct index in decrypt path.
fscrypt: move the policy flags and encryption mode definitions to uapi header
fscrypt: move non-public structures and constants to fscrypt_private.h
fscrypt: unexport fscrypt_initialize()
fscrypt: rename get_crypt_info() to fscrypt_get_crypt_info()
fscrypto: move ioctl processing more fully into common code
fscrypto: remove unneeded Kconfig dependencies
MAINTAINERS: fscrypto: recommend linux-fsdevel for fscrypto patches
ext4: do not perform data journaling when data is encrypted
ext4: return -ENOMEM instead of success
ext4: reject inodes with negative size
ext4: remove another test in ext4_alloc_file_blocks()
Documentation: fix description of ext4's block_validity mount option
ext4: fix checks for data=ordered and journal_async_commit options
...
Straight switch over to using iomap for direct I/O - we already have the
non-COW dio path in write_begin for DAX and files with extent size hints,
so nothing to add there. The COW path is ported over from the old
get_blocks version and a bit of a mess, but I have some work in progress
to make it look more like the buffered I/O COW path.
This gets rid of xfs_get_blocks_direct and the last caller of
xfs_get_blocks with the create flag set, so all that code can be removed.
Last but not least I've removed a comment in xfs_filemap_fault that
refers to xfs_get_blocks entirely instead of updating it - while the
reference is correct, the whole DAX fault path looks different than
the non-DAX one, so it seems rather pointless.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This patch drops the XFS-own i_iolock and uses the VFS i_rwsem which
recently replaced i_mutex instead. This means we only have to take
one lock instead of two in many fast path operations, and we can
also shrink the xfs_inode structure. Thanks to the xfs_ilock family
there is very little churn, the only thing of note is that we need
to switch to use the lock_two_directory helper for taking the i_rwsem
on two inodes in a few places to make sure our lock order matches
the one used in the VFS.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Tested-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Use xfs_iext_lookup_extent to look up the extent, drop a useless check,
drop a unneeded return value and clean up the general style a little bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We've had reports of generic/095 causing XFS to BUG() in
__xfs_get_blocks() due to the existence of delalloc blocks on a
direct I/O read. generic/095 issues a mix of various types of I/O,
including direct and memory mapped I/O to a single file. This is
clearly not supported behavior and is known to lead to such
problems. E.g., the lack of exclusion between the direct I/O and
write fault paths means that a write fault can allocate delalloc
blocks in a region of a file that was previously a hole after the
direct read has attempted to flush/inval the file range, but before
it actually reads the block mapping. In turn, the direct read
discovers a delalloc extent and cannot proceed.
While the appropriate solution here is to not mix direct and memory
mapped I/O to the same regions of the same file, the current
BUG_ON() behavior is probably overkill as it can crash the entire
system. Instead, localize the failure to the I/O in question by
returning an error for a direct I/O that cannot be handled safely
due to delalloc blocks. Be careful to allow the case of a direct
write to post-eof delalloc blocks. This can occur due to speculative
preallocation and is safe as post-eof blocks are not accompanied by
dirty pages in pagecache (conversely, preallocation within eof must
have been zeroed, and thus dirtied, before the inode size could have
been increased beyond said blocks).
Finally, provide an additional warning if a direct I/O write occurs
while the file is memory mapped. This may not catch all problematic
scenarios, but provides a hint that some known-to-be-problematic I/O
methods are in use.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Switch xfs_filemap_pmd_fault() from using dax_pmd_fault() to the new and
improved dax_iomap_pmd_fault(). Also, now that it has no more users,
remove xfs_get_blocks_dax_fault().
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Add wbc_to_write_flags(), which returns the write modifier flags to use,
based on a struct writeback_control. No functional changes in this
patch, but it prepares us for factoring other wbc fields for write type.
Signed-off-by: Jens Axboe <axboe@fb.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Remove the WRITE_* and READ_SYNC wrappers, and just use the flags
directly. Where applicable this also drops usage of the
bio_set_op_attrs wrapper.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
We need to splice COW blocks we've completed in xfs_end_io_direct_write
into the data fork before converting unwritten extents. Otherwise
xfs_bmapi_write might first allocate blocks for any holes in the data
fork, which isn't only not needed but also harmful as it might cause
reserved block underruns in the transaction.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
For O_DIRECT writes to shared blocks, we have to CoW them just like
we would with buffered writes. For writes that are not block-aligned,
just bounce them to the page cache.
For block-aligned writes, however, we can do better than that. Use
the same mechanisms that we employ for buffered CoW to set up a
delalloc reservation, allocate all the blocks at once, issue the
writes against the new blocks and use the same ioend functions to
remap the blocks after the write. This should be fairly performant.
Christoph discovered that xfs_reflink_allocate_cow_range may stumble
over invalid entries in the extent array given that it drops the ilock
but still expects the index to be stable. Simple fixing it to a new
lookup for every iteration still isn't correct given that
xfs_bmapi_allocate will trigger a BUG_ON() if hitting a hole, and
there is nothing preventing a xfs_bunmapi_cow call removing extents
once we dropped the ilock either.
This patch duplicates the inner loop of xfs_bmapi_allocate into a
helper for xfs_reflink_allocate_cow_range so that it can be done under
the same ilock critical section as our CoW fork delayed allocation.
The directio CoW warts will be revisited in a later patch.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Report shared extents through the iomap interface so that FIEMAP flags
shared blocks accurately. Have xfs_vm_bmap return zero for reflinked
files because the bmap-based swap code requires static block mappings,
which is incompatible with copy on write.
NOTE: Existing userspace bmap users such as lilo will have the same
problem with reflink files.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
After the write component of a copy-write operation finishes, clean up
the bookkeeping left behind. On error, we simply free the new blocks
and pass the error up. If we succeed, however, then we must remove
the old data fork mapping and move the cow fork mapping to the data
fork.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
[hch: Call the CoW failure function during xfs_cancel_ioend]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Modify the writepage handler to find and convert pending delalloc
extents to real allocations. Furthermore, when we're doing non-cow
writes to a part of a file that already has a CoW reservation (the
cowextsz hint that we set up in a subsequent patch facilitates this),
promote the write to copy-on-write so that the entire extent can get
written out as a single extent on disk, thereby reducing post-CoW
fragmentation.
Christoph moved the CoW support code in _map_blocks to a separate helper
function, refactored other functions, and reduced the number of CoW fork
lookups, so I merged those changes here to reduce churn.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Modify xfs_bmap_add_extent_delay_real() so that we can convert delayed
allocation extents in the CoW fork to real allocations, and wire this
up all the way back to xfs_iomap_write_allocate(). In a subsequent
patch, we'll modify the writepage handler to call this.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Rename the current function to __xfs_setfilesize and add a non-static
wrapper that also takes care of creating the transaction. This new
helper will be used by the new iomap-based DAX path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Changes in this update:
o generic iomap based IO path infrastructure
o generic iomap based fiemap implementation
o xfs iomap based Io path implementation
o buffer error handling fixes
o tracking of in flight buffer IO for unmount serialisation
o direct IO and DAX io path separation and simplification
o shortform directory format definition changes for wider platform compatibility
o various buffer cache fixes
o cleanups in preparation for rmap merge
o error injection cleanups and fixes
o log item format buffer memory allocation restructuring to prevent rare OOM
reclaim deadlocks
o sparse inode chunks are now fully supported.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=vcSd
-----END PGP SIGNATURE-----
Merge tag 'xfs-for-linus-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs
Pull xfs updates from Dave Chinner:
"The major addition is the new iomap based block mapping
infrastructure. We've been kicking this about locally for years, but
there are other filesystems want to use it too (e.g. gfs2). Now it
is fully working, reviewed and ready for merge and be used by other
filesystems.
There are a lot of other fixes and cleanups in the tree, but those are
XFS internal things and none are of the scale or visibility of the
iomap changes. See below for details.
I am likely to send another pull request next week - we're just about
ready to merge some new functionality (on disk block->owner reverse
mapping infrastructure), but that's a huge chunk of code (74 files
changed, 7283 insertions(+), 1114 deletions(-)) so I'm keeping that
separate to all the "normal" pull request changes so they don't get
lost in the noise.
Summary of changes in this update:
- generic iomap based IO path infrastructure
- generic iomap based fiemap implementation
- xfs iomap based Io path implementation
- buffer error handling fixes
- tracking of in flight buffer IO for unmount serialisation
- direct IO and DAX io path separation and simplification
- shortform directory format definition changes for wider platform
compatibility
- various buffer cache fixes
- cleanups in preparation for rmap merge
- error injection cleanups and fixes
- log item format buffer memory allocation restructuring to prevent
rare OOM reclaim deadlocks
- sparse inode chunks are now fully supported"
* tag 'xfs-for-linus-4.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (53 commits)
xfs: remove EXPERIMENTAL tag from sparse inode feature
xfs: bufferhead chains are invalid after end_page_writeback
xfs: allocate log vector buffers outside CIL context lock
libxfs: directory node splitting does not have an extra block
xfs: remove dax code from object file when disabled
xfs: skip dirty pages in ->releasepage()
xfs: remove __arch_pack
xfs: kill xfs_dir2_inou_t
xfs: kill xfs_dir2_sf_off_t
xfs: split direct I/O and DAX path
xfs: direct calls in the direct I/O path
xfs: stop using generic_file_read_iter for direct I/O
xfs: split xfs_file_read_iter into buffered and direct I/O helpers
xfs: remove s_maxbytes enforcement in xfs_file_read_iter
xfs: kill ioflags
xfs: don't pass ioflags around in the ioctl path
xfs: track and serialize in-flight async buffers against unmount
xfs: exclude never-released buffers from buftarg I/O accounting
xfs: don't reset b_retries to 0 on every failure
xfs: remove extraneous buffer flag changes
...
In xfs_finish_page_writeback(), we have a loop that looks like this:
do {
if (off < bvec->bv_offset)
goto next_bh;
if (off > end)
break;
bh->b_end_io(bh, !error);
next_bh:
off += bh->b_size;
} while ((bh = bh->b_this_page) != head);
The b_end_io function is end_buffer_async_write(), which will call
end_page_writeback() once all the buffers have marked as no longer
under IO. This issue here is that the only thing currently
protecting both the bufferhead chain and the page from being
reclaimed is the PageWriteback state held on the page.
While we attempt to limit the loop to just the buffers covered by
the IO, we still read from the buffer size and follow the next
pointer in the bufferhead chain. There is no guarantee that either
of these are valid after the PageWriteback flag has been cleared.
Hence, loops like this are completely unsafe, and result in
use-after-free issues. One such problem was caught by Calvin Owens
with KASAN:
.....
INFO: Freed in 0x103fc80ec age=18446651500051355200 cpu=2165122683 pid=-1
free_buffer_head+0x41/0x90
__slab_free+0x1ed/0x340
kmem_cache_free+0x270/0x300
free_buffer_head+0x41/0x90
try_to_free_buffers+0x171/0x240
xfs_vm_releasepage+0xcb/0x3b0
try_to_release_page+0x106/0x190
shrink_page_list+0x118e/0x1a10
shrink_inactive_list+0x42c/0xdf0
shrink_zone_memcg+0xa09/0xfa0
shrink_zone+0x2c3/0xbc0
.....
Call Trace:
<IRQ> [<ffffffff81e8b8e4>] dump_stack+0x68/0x94
[<ffffffff8153a995>] print_trailer+0x115/0x1a0
[<ffffffff81541174>] object_err+0x34/0x40
[<ffffffff815436e7>] kasan_report_error+0x217/0x530
[<ffffffff81543b33>] __asan_report_load8_noabort+0x43/0x50
[<ffffffff819d651f>] xfs_destroy_ioend+0x3bf/0x4c0
[<ffffffff819d69d4>] xfs_end_bio+0x154/0x220
[<ffffffff81de0c58>] bio_endio+0x158/0x1b0
[<ffffffff81dff61b>] blk_update_request+0x18b/0xb80
[<ffffffff821baf57>] scsi_end_request+0x97/0x5a0
[<ffffffff821c5558>] scsi_io_completion+0x438/0x1690
[<ffffffff821a8d95>] scsi_finish_command+0x375/0x4e0
[<ffffffff821c3940>] scsi_softirq_done+0x280/0x340
Where the access is occuring during IO completion after the buffer
had been freed from direct memory reclaim.
Prevent use-after-free accidents in this end_io processing loop by
pre-calculating the loop conditionals before calling bh->b_end_io().
The loop is already limited to just the bufferheads covered by the
IO in progress, so the offset checks are sufficient to prevent
accessing buffers in the chain after end_page_writeback() has been
called by the the bh->b_end_io() callout.
Yet another example of why Bufferheads Must Die.
cc: <stable@vger.kernel.org> # 4.7
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reported-and-Tested-by: Calvin Owens <calvinowens@fb.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
XFS has had scattered reports of delalloc blocks present at
->releasepage() time. This results in a warning with a stack trace
similar to the following:
...
Call Trace:
[<ffffffffa23c5b8f>] dump_stack+0x63/0x84
[<ffffffffa20837a7>] warn_slowpath_common+0x97/0xe0
[<ffffffffa208380a>] warn_slowpath_null+0x1a/0x20
[<ffffffffa2326caf>] xfs_vm_releasepage+0x10f/0x140
[<ffffffffa218c680>] ? page_mkclean_one+0xd0/0xd0
[<ffffffffa218d3a0>] ? anon_vma_prepare+0x150/0x150
[<ffffffffa21521c2>] try_to_release_page+0x32/0x50
[<ffffffffa2166b2e>] shrink_active_list+0x3ce/0x3e0
[<ffffffffa21671c7>] shrink_lruvec+0x687/0x7d0
[<ffffffffa21673ec>] shrink_zone+0xdc/0x2c0
[<ffffffffa2168539>] kswapd+0x4f9/0x970
[<ffffffffa2168040>] ? mem_cgroup_shrink_node_zone+0x1a0/0x1a0
[<ffffffffa20a0d99>] kthread+0xc9/0xe0
[<ffffffffa20a0cd0>] ? kthread_stop+0x100/0x100
[<ffffffffa26b404f>] ret_from_fork+0x3f/0x70
[<ffffffffa20a0cd0>] ? kthread_stop+0x100/0x100
This occurs because it is possible for shrink_active_list() to send
pages marked dirty to ->releasepage() when certain buffer_head threshold
conditions are met. shrink_active_list() doesn't check the page dirty
state apparently to handle an old ext3 corner case where in some cases
clean pages would not have the dirty bit cleared, thus it is up to the
filesystem to determine how to handle the page.
XFS currently handles the delalloc case properly, but this behavior
makes the warning spurious. Update the XFS ->releasepage() handler to
explicitly skip dirty pages. Retain the existing delalloc/unwritten
checks so we continue to warn if such buffers exist on clean pages when
they shouldn't.
Diagnosed-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We control both the callers and callees of ->direct_IO, so remove the
indirect calls.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Convert XFS to use the new iomap based multipage write path. This involves
implementing the ->iomap_begin and ->iomap_end methods, and switching the
buffered file write, page_mkwrite and xfs_iozero paths to the new iomap
helpers.
With this change __xfs_get_blocks will never be used for buffered writes,
and the code handling them can be removed.
Based on earlier code from Dave Chinner.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Separate the op from the rq_flag_bits and have xfs
set/get the bio using bio_set_op_attrs/bio_op.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This has callers of submit_bio/submit_bio_wait set the bio->bi_rw
instead of passing it in. This makes that use the same as
generic_make_request and how we set the other bio fields.
Signed-off-by: Mike Christie <mchristi@redhat.com>
Fixed up fs/ext4/crypto.c
Signed-off-by: Jens Axboe <axboe@fb.com>
Changes in this update:
o fixes for mount line parsing, sparse warnings, read-only compat
feature remount behaviour
o allow fast path symlink lookups for inline symlinks.
o attribute listing cleanups
o writeback goes direct to bios rather than indirecting through
bufferheads
o transaction allocation cleanup
o optimised kmem_realloc
o added configurable error handling for metadata write errors,
changed default error handling behaviour from "retry forever" to
"retry until unmount then fail"
o fixed several inode cluster writeback lookup vs reclaim race
conditions
o fixed inode cluster writeback checking wrong inode after lookup
o fixed bugs where struct xfs_inode freeing wasn't actually RCU safe
o cleaned up inode reclaim tagging
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=0tYo
-----END PGP SIGNATURE-----
Merge tag 'xfs-for-linus-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs
Pull xfs updates from Dave Chinner:
"A pretty average collection of fixes, cleanups and improvements in
this request.
Summary:
- fixes for mount line parsing, sparse warnings, read-only compat
feature remount behaviour
- allow fast path symlink lookups for inline symlinks.
- attribute listing cleanups
- writeback goes direct to bios rather than indirecting through
bufferheads
- transaction allocation cleanup
- optimised kmem_realloc
- added configurable error handling for metadata write errors,
changed default error handling behaviour from "retry forever" to
"retry until unmount then fail"
- fixed several inode cluster writeback lookup vs reclaim race
conditions
- fixed inode cluster writeback checking wrong inode after lookup
- fixed bugs where struct xfs_inode freeing wasn't actually RCU safe
- cleaned up inode reclaim tagging"
* tag 'xfs-for-linus-4.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (39 commits)
xfs: fix warning in xfs_finish_page_writeback for non-debug builds
xfs: move reclaim tagging functions
xfs: simplify inode reclaim tagging interfaces
xfs: rename variables in xfs_iflush_cluster for clarity
xfs: xfs_iflush_cluster has range issues
xfs: mark reclaimed inodes invalid earlier
xfs: xfs_inode_free() isn't RCU safe
xfs: optimise xfs_iext_destroy
xfs: skip stale inodes in xfs_iflush_cluster
xfs: fix inode validity check in xfs_iflush_cluster
xfs: xfs_iflush_cluster fails to abort on error
xfs: remove xfs_fs_evict_inode()
xfs: add "fail at unmount" error handling configuration
xfs: add configuration handlers for specific errors
xfs: add configuration of error failure speed
xfs: introduce table-based init for error behaviors
xfs: add configurable error support to metadata buffers
xfs: introduce metadata IO error class
xfs: configurable error behavior via sysfs
xfs: buffer ->bi_end_io function requires irq-safe lock
...
Including blkdev_direct_IO and dax_do_io. It has to be ki_pos to actually
work, so eliminate the superflous argument.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Merge xfs_trans_reserve and xfs_trans_alloc into a single function call
that returns a transaction with all the required log and block reservations,
and which allows passing transaction flags directly to avoid the cumbersome
_xfs_trans_alloc interface.
While we're at it we also get rid of the transaction type argument that has
been superflous since we stopped supporting the non-CIL logging mode. The
guts of it will be removed in another patch.
[dchinner: fixed transaction leak in error path in xfs_setattr_nonsize]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This patch implements two closely related changes: First it embeds
a bio the ioend structure so that we don't have to allocate one
separately. Second it uses the block layer bio chaining mechanism
to chain additional bios off this first one if needed instead of
manually accounting for multiple bio completions in the ioend
structure. Together this removes a memory allocation per ioend and
greatly simplifies the ioend setup and I/O completion path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Completion of an ioend requires us to walk the bufferhead list to
end writback on all the bufferheads. This, in turn, is needed so
that we can end writeback on all the pages we just did IO on.
To remove our dependency on bufferheads in writeback, we need to
turn this around the other way - we need to walk the pages we've
just completed IO on, and then walk the buffers attached to the
pages and complete their IO. In doing this, we remove the
requirement for the ioend to track bufferheads directly.
To enable IO completion to walk all the pages we've submitted IO on,
we need to keep the bios that we used for IO around until the ioend
has been completed. We can do this simply by chaining the bios to
the ioend at completion time, and then walking their pages directly
just before destroying the ioend.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
[hch: changed the xfs_finish_page_writeback calling convention]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Currently adding a buffer to the ioend and then building a bio from
the buffer list are two separate operations. We don't build the bios
and submit them until the ioend is submitted, and this places a
fixed dependency on bufferhead chaining in the ioend.
The first step to removing the bufferhead chaining in the ioend is
on the IO submission side. We can build the bio directly as we add
the buffers to the ioend chain, thereby removing the need for a
latter "buffer-to-bio" submission loop. This allows us to submit
bios on large ioends as soon as we cannot add more data to the bio.
These bios then get captured by the active plug, and hence will be
dispatched as soon as either the plug overflows or we schedule away
from the writeback context. This will reduce submission latency for
large IOs, but will also allow more timely request queue based
writeback blocking when the device becomes congested.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
[hch: various small updates]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Mostly direct substitution with occasional adjustment or removing
outdated comments.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} macros were introduced *long* time
ago with promise that one day it will be possible to implement page
cache with bigger chunks than PAGE_SIZE.
This promise never materialized. And unlikely will.
We have many places where PAGE_CACHE_SIZE assumed to be equal to
PAGE_SIZE. And it's constant source of confusion on whether
PAGE_CACHE_* or PAGE_* constant should be used in a particular case,
especially on the border between fs and mm.
Global switching to PAGE_CACHE_SIZE != PAGE_SIZE would cause to much
breakage to be doable.
Let's stop pretending that pages in page cache are special. They are
not.
The changes are pretty straight-forward:
- <foo> << (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- <foo> >> (PAGE_CACHE_SHIFT - PAGE_SHIFT) -> <foo>;
- PAGE_CACHE_{SIZE,SHIFT,MASK,ALIGN} -> PAGE_{SIZE,SHIFT,MASK,ALIGN};
- page_cache_get() -> get_page();
- page_cache_release() -> put_page();
This patch contains automated changes generated with coccinelle using
script below. For some reason, coccinelle doesn't patch header files.
I've called spatch for them manually.
The only adjustment after coccinelle is revert of changes to
PAGE_CAHCE_ALIGN definition: we are going to drop it later.
There are few places in the code where coccinelle didn't reach. I'll
fix them manually in a separate patch. Comments and documentation also
will be addressed with the separate patch.
virtual patch
@@
expression E;
@@
- E << (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
expression E;
@@
- E >> (PAGE_CACHE_SHIFT - PAGE_SHIFT)
+ E
@@
@@
- PAGE_CACHE_SHIFT
+ PAGE_SHIFT
@@
@@
- PAGE_CACHE_SIZE
+ PAGE_SIZE
@@
@@
- PAGE_CACHE_MASK
+ PAGE_MASK
@@
expression E;
@@
- PAGE_CACHE_ALIGN(E)
+ PAGE_ALIGN(E)
@@
expression E;
@@
- page_cache_get(E)
+ get_page(E)
@@
expression E;
@@
- page_cache_release(E)
+ put_page(E)
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Acked-by: Michal Hocko <mhocko@suse.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Change summary:
o error propagation for direct IO failures fixes for both XFS and ext4
o new quota interfaces and XFS implementation for iterating all the quota IDs
in the filesystem
o locking fixes for real-time device extent allocation
o reduction of duplicate information in the xfs and vfs inode, saving roughly
100 bytes of memory per cached inode.
o buffer flag cleanup
o rework of the writepage code to use the generic write clustering mechanisms
o several fixes for inode flag based DAX enablement
o rework of remount option parsing
o compile time verification of on-disk format structure sizes
o delayed allocation reservation overrun fixes
o lots of little error handling fixes
o small memory leak fixes
o enable xfsaild freezing again
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJW71DQAAoJEK3oKUf0dfodyiwP/0Tou9f1huzLC0kd7kmEoKKC
BWQmtJGEdo0iSpJNZhg/EJmjvRtbBiOB9CRcEyG8d71kqZ+MKW7t/4JjNvNG34aE
vHjhwMBVVqkw/q6azi2LiEDsVcOe5bXxUrXNZi18/09OAl4pHm+X8VERLnnC5y+i
QIHAOdB5R+36cXcceJm1HR6jTZedbNdQkT/ndhm5S60FGhvVI29cs9NwYwoi5aif
O55r6krSWBj6U/X6MsLvr+lNb6+1Sd1hyE8dGTE7lOUX/crFIysaDPEuQmWvDjsO
M1ulVfzKoBJHcyvpbdHwdBEyiBjzvETcrgndMRoWOjZiOLqNtWYsgIEiC+Nlidwd
+T4XhkJJJg5UUQ4r6Hs85SQn/THanzR5KoN5nbTsFtFkCKw1DRkUSNuh2mXP2xVG
JcNDCjDvvHG76EfQ1otlYf7ru79Ck+hjVs+szaEVPpOzAwz8yOtD+L7I8f73gQ6a
ayP8W2oZQpYvQRv+smgvt+HwQA4fNJk9ZseY3QD5+z5snJz7JEhZogqW+ngFYkNQ
dtA5Y7gpTkKfo3mKO0XmE5+3fcSXhGHGYQzmUgJFlgWTK7+E8fuDhn6D66wFcZSq
QhyRk9J7Xb7ZWuP5PlOkxb9DLd4hnuyie2bYw/0hVtOatjE/Em4gRJ3Oq3ZANwZx
OeMGj4Uyb3/MKAJwy3Gq
=ZoiX
-----END PGP SIGNATURE-----
Merge tag 'xfs-for-linus-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs
Pull xfs updates from Dave Chinner:
"There's quite a lot in this request, and there's some cross-over with
ext4, dax and quota code due to the nature of the changes being made.
As for the rest of the XFS changes, there are lots of little things
all over the place, which add up to a lot of changes in the end.
The major changes are that we've reduced the size of the struct
xfs_inode by ~100 bytes (gives an inode cache footprint reduction of
>10%), the writepage code now only does a single set of mapping tree
lockups so uses less CPU, delayed allocation reservations won't
overrun under random write loads anymore, and we added compile time
verification for on-disk structure sizes so we find out when a commit
or platform/compiler change breaks the on disk structure as early as
possible.
Change summary:
- error propagation for direct IO failures fixes for both XFS and
ext4
- new quota interfaces and XFS implementation for iterating all the
quota IDs in the filesystem
- locking fixes for real-time device extent allocation
- reduction of duplicate information in the xfs and vfs inode, saving
roughly 100 bytes of memory per cached inode.
- buffer flag cleanup
- rework of the writepage code to use the generic write clustering
mechanisms
- several fixes for inode flag based DAX enablement
- rework of remount option parsing
- compile time verification of on-disk format structure sizes
- delayed allocation reservation overrun fixes
- lots of little error handling fixes
- small memory leak fixes
- enable xfsaild freezing again"
* tag 'xfs-for-linus-4.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (66 commits)
xfs: always set rvalp in xfs_dir2_node_trim_free
xfs: ensure committed is initialized in xfs_trans_roll
xfs: borrow indirect blocks from freed extent when available
xfs: refactor delalloc indlen reservation split into helper
xfs: update freeblocks counter after extent deletion
xfs: debug mode forced buffered write failure
xfs: remove impossible condition
xfs: check sizes of XFS on-disk structures at compile time
xfs: ioends require logically contiguous file offsets
xfs: use named array initializers for log item dumping
xfs: fix computation of inode btree maxlevels
xfs: reinitialise per-AG structures if geometry changes during recovery
xfs: remove xfs_trans_get_block_res
xfs: fix up inode32/64 (re)mount handling
xfs: fix format specifier , should be %llx and not %llu
xfs: sanitize remount options
xfs: convert mount option parsing to tokens
xfs: fix two memory leaks in xfs_attr_list.c error paths
xfs: XFS_DIFLAG2_DAX limited by PAGE_SIZE
xfs: dynamically switch modes when XFS_DIFLAG2_DAX is set/cleared
...
Now that migration doesn't clear page->mem_cgroup of live pages anymore,
it's safe to make lock_page_memcg() and the memcg stat functions take
pages, and spare the callers from memcg objects.
[akpm@linux-foundation.org: fix warnings]
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Suggested-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: Michal Hocko <mhocko@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
These patches tag the page cache radix tree eviction entries with the
memcg an evicted page belonged to, thus making per-cgroup LRU reclaim
work properly and be as adaptive to new cache workingsets as global
reclaim already is.
This should have been part of the original thrash detection patch
series, but was deferred due to the complexity of those patches.
This patch (of 5):
So far the only sites that needed to exclude charge migration to
stabilize page->mem_cgroup have been per-cgroup page statistics, hence
the name mem_cgroup_begin_page_stat(). But per-cgroup thrash detection
will add another site that needs to ensure page->mem_cgroup lifetime.
Rename these locking functions to the more generic lock_page_memcg() and
unlock_page_memcg(). Since charge migration is a cgroup1 feature only,
we might be able to delete it at some point, and these now easy to
identify locking sites along with it.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Suggested-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Acked-by: Vladimir Davydov <vdavydov@virtuozzo.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: David Rientjes <rientjes@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a DEBUG mode-only sysfs knob to enable forced buffered write
failure. An additional side effect of this mode is brute force killing
of delayed allocation blocks in the range of the write. The latter is
the prime motiviation behind this patch, as userspace test
infrastructure requires a reliable mechanism to create and split
delalloc extents without causing extent conversion.
Certain fallocate operations (i.e., zero range) were used for this in
the past, but the implementations have changed such that delalloc
extents are flushed and converted to real blocks, rendering the test
useless.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We need to create a new ioend if the current writepage call isn't
logically contiguous with the range contained in the previous ioend.
Hopefully writepage gets called in order of increasing file offset.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Previously calls to dax_writeback_mapping_range() for all DAX filesystems
(ext2, ext4 & xfs) were centralized in filemap_write_and_wait_range().
dax_writeback_mapping_range() needs a struct block_device, and it used
to get that from inode->i_sb->s_bdev. This is correct for normal inodes
mounted on ext2, ext4 and XFS filesystems, but is incorrect for DAX raw
block devices and for XFS real-time files.
Instead, call dax_writeback_mapping_range() directly from the filesystem
->writepages function so that it can supply us with a valid block
device. This also fixes DAX code to properly flush caches in response
to sync(2).
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
dax_clear_blocks() needs a valid struct block_device and previously it
was using inode->i_sb->s_bdev in all cases. This is correct for normal
inodes on mounted ext2, ext4 and XFS filesystems, but is incorrect for
DAX raw block devices and for XFS real-time devices.
Instead, rename dax_clear_blocks() to dax_clear_sectors(), and change
its arguments to take a bdev and a sector instead of an inode and a
block. This better reflects what the function does, and it allows the
filesystem and raw block device code to pass in an appropriate struct
block_device.
Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com>
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: Al Viro <viro@ftp.linux.org.uk>
Cc: Dave Chinner <david@fromorbit.com>
Cc: Jens Axboe <axboe@fb.com>
Cc: Matthew Wilcox <matthew.r.wilcox@intel.com>
Cc: Ross Zwisler <ross.zwisler@linux.intel.com>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently we can build a long ioend chain during ->writepages that
gets attached to the writepage context. IO submission only then
occurs when we finish all the writepage processing. This means we
can have many ioends allocated and pending, and this violates the
mempool guarantees that we need to give about forwards progress.
i.e. we really should only have one ioend being built at a time,
otherwise we may drain the mempool trying to allocate a new ioend
and that blocks submission, completion and freeing of ioends that
are already in progress.
To prevent this situation from happening, we need to submit ioends
for IO as soon as they are ready for dispatch rather than queuing
them for later submission. This means the ioends have bios built
immediately and they get queued on any plug that is current active.
Hence if we schedule away from writeback, the ioends that have been
built will make forwards progress due to the plug flushing on
context switch. This will also prevent context switches from
creating unnecessary IO submission latency.
We can't completely avoid having nested IO allocation - when we have
a block size smaller than a page size, we still need to hold the
ioend submission until after we have marked the current page dirty.
Hence we may need multiple ioends to be held while the current page
is completely mapped and made ready for IO dispatch. We cannot avoid
this problem - the current code already has this ioend chaining
within a page so we can mostly ignore that it occurs.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Separate out the bufferhead based mapping from the writepage code so
that we have a clear separation of the page operations and the
bufferhead state.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs_cluster_write() is not necessary now that xfs_vm_writepages()
aggregates writepage calls across a single mapping. This means we no
longer need to do page lookups in xfs_cluster_write, so writeback
only needs to look up th epage cache once per page being written.
This also removes a large amount of mostly duplicate code between
xfs_do_writepage() and xfs_convert_page().
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs_vm_writepages() calls generic_writepages to writeback a range of
a file, but then xfs_vm_writepage() clusters pages itself as it does
not have any context it can pass between->writepage calls from
__write_cache_pages().
Introduce a writeback context for xfs_vm_writepages() and call
__write_cache_pages directly with our own writepage callback so that
we can pass that context to each writepage invocation. This
encapsulates the current mapping, whether it is valid or not, the
current ioend and it's IO type and the ioend chain being built.
This requires us to move the ioend submission up to the level where
the writepage context is declared. This does mean we do not submit
IO until we packaged the entire writeback range, but with the block
plugging in the writepages call this is the way IO is submitted,
anyway.
It also means that we need to handle discontiguous page ranges. If
the pages sent down by write_cache_pages to the writepage callback
are discontiguous, we need to detect this and put each discontiguous
page range into individual ioends. This is needed to ensure that the
ioend accurately represents the range of the file that it covers so
that file size updates during IO completion set the size correctly.
Failure to take into account the discontiguous ranges results in
files being too small when writeback patterns are non-sequential.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We currently have code to cancel ioends being built because we
change bufferhead state as we build the ioend. On error, this needs
to be unwound and so we have cancelling code that walks the buffers
on the ioend chain and undoes these state changes.
However, the IO submission path already handles state changes for
buffers when a submission error occurs, so we don't really need a
separate cancel function to do this - we can simply submit the
ioend chain with the specific error and it will be cancelled rather
than submitted.
Hence we can remove the explicit cancel code and just rely on
submission to deal with the error correctly.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Remove the nonblocking optimisation done for mapping lookups during
writeback. It's not clear that leaving a hole in the writeback range
just because we couldn't get a lock is really a win, as it makes us
do another small random IO later on rather than a large sequential
IO now.
As this gets in the way of sane error handling later on, just remove
for the moment and we can re-introduce an equivalent optimisation in
future if we see problems due to extent map lock contention.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
If the filesystem has shut down, xfs_end_io() currently sets an
error on the ioend and proceeds to ioend destruction. The ioend
might contain a truncate transaction if the I/O extended the size of
the file. This transaction is only cleaned up in
xfs_setfilesize_ioend(), however, which is skipped in this case.
This results in an xfs_log_ticket leak message when the associate
cache slab is destroyed (e.g., on rmmod).
This was originally reproduced by xfs/141 on a distro kernel. The
problem is reproducible on an upstream kernel, but not easily
detected in current upstream if the xfs_log_ticket cache happens to
be merged with another cache. This can be reproduced more
deterministically with the 'slab_nomerge' kernel boot option.
Update xfs_end_io() to proceed with normal end I/O processing after
an error is set on an ioend due to fs shutdown. The I/O type-based
processing is already designed to handle an I/O error and ensure
that the ioend is cleaned up correctly.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The xfs_vm_write_failed() handler is currently responsible for cleaning
up any delalloc blocks over the range of a failed write beyond EOF.
Failure to do so results in warning messages and other inconsistencies
between buffer and extent state. The ->releasepage() handler currently
warns in the event of a page being released with either unwritten or
delalloc buffers, as neither is ever expected by the time a page is
released.
As has been reproduced by generic/083 on a -bsize=1k fs, it is currently
possible to trigger the ->releasepage() warning for a page with
unwritten buffers when a filesystem is near ENOSPC. This is reproduced
by the following sequence:
$ mkfs.xfs -f -b size=1k -d size=100m <dev>
$ mount <dev> /mnt/
$
$ xfs_io -fc "falloc -k 0 1k" /mnt/file
$ dd if=/dev/zero of=/mnt/enospc conv=notrunc oflag=append
$
$ xfs_io -c "pwrite 512 1k" /mnt/file
$ xfs_io -d -c "pwrite 16k 1k" /mnt/file
The first pwrite command attempts a block unaligned write across an
unwritten block and a hole. The delalloc for the hole fails with ENOSPC
and the subsequent error handling does not clean up the unwritten buffer
that was instantiated during the first ->get_block() call.
The second pwrite triggers a warning as part of the inode mapping
invalidation that occurs prior to direct I/O. The releasepage() handler
detects the unwritten buffer at this time, warns and prevents the
release of the page.
To deal with this problem, update xfs_vm_write_failed() to clean up
unwritten as well as delalloc buffers that are beyond EOF and within the
range of the failed write.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
We only need to communicate two bits of information to the direct I/O
completion handler:
(1) do we need to convert any unwritten extents in the range
(2) do we need to check if we need to update the inode size based
on the range passed to the completion handler
We can use the private data passed to the get_block handler and the
completion handler as a simple bitmask to communicate this information
instead of the current complicated infrastructure reusing the ioends
from the buffer I/O path, and thus avoiding a memory allocation and
a context switch for any non-trivial direct write. As a nice side
effect we also decouple the direct I/O path implementation from that
of the buffered I/O path.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
This way we can pass back errors to the file system, and allow for
cleanup required for all direct I/O invocations.
Also allow the ->end_io handlers to return errors on their own, so that
I/O completion errors can be passed on to the callers.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This allows us to see page cache driven readahead in action as it
passes through XFS. This helps to understand buffered read
throughput problems such as readahead IO IO sizes being too small
for the underlying device to reach max throughput.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
For DAX, we are now doing block zeroing during allocation. This
means we no longer need a special DAX fault IO completion callback
to do unwritten extent conversion. Because mmap never extends the
file size (it SEGVs the process) we don't need a callback to update
the file size, either. Hence we can remove the completion callbacks
from the __dax_fault and __dax_mkwrite calls.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
DAX has a page fault serialisation problem with block allocation.
Because it allows concurrent page faults and does not have a page
lock to serialise faults to the same page, it can get two concurrent
faults to the page that race.
When two read faults race, this isn't a huge problem as the data
underlying the page is not changing and so "detect and drop" works
just fine. The issues are to do with write faults.
When two write faults occur, we serialise block allocation in
get_blocks() so only one faul will allocate the extent. It will,
however, be marked as an unwritten extent, and that is where the
problem lies - the DAX fault code cannot differentiate between a
block that was just allocated and a block that was preallocated and
needs zeroing. The result is that both write faults end up zeroing
the block and attempting to convert it back to written.
The problem is that the first fault can zero and convert before the
second fault starts zeroing, resulting in the zeroing for the second
fault overwriting the data that the first fault wrote with zeros.
The second fault then attempts to convert the unwritten extent,
which is then a no-op because it's already written. Data loss occurs
as a result of this race.
Because there is no sane locking construct in the page fault code
that we can use for serialisation across the page faults, we need to
ensure block allocation and zeroing occurs atomically in the
filesystem. This means we can still take concurrent page faults and
the only time they will serialise is in the filesystem
mapping/allocation callback. The page fault code will always see
written, initialised extents, so we will be able to remove the
unwritten extent handling from the DAX code when all filesystems are
converted.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Both direct IO and DAX pass an offset and count into get_blocks that
will overflow a s64 variable when an IO goes into the last supported
block in a file (i.e. at offset 2^63 - 1FSB bytes). This can be seen
from the tracing:
xfs_get_blocks_alloc: [...] offset 0x7ffffffffffff000 count 4096
xfs_gbmap_direct: [...] offset 0x7ffffffffffff000 count 4096
xfs_gbmap_direct_none:[...] offset 0x7ffffffffffff000 count 4096
0x7ffffffffffff000 + 4096 = 0x8000000000000000, and hence that
overflows the s64 offset and we fail to detect the need for a
filesize update and an ioend is not allocated.
This is *mostly* avoided for direct IO because such extending IOs
occur with full block allocation, and so the "IS_UNWRITTEN()" check
still evaluates as true and we get an ioend that way. However, doing
single sector extending IOs to this last block will expose the fact
that file size updates will not occur after the first allocating
direct IO as the overflow will then be exposed.
There is one further complexity: the DAX page fault path also
exposes the same issue in block allocation. However, page faults
cannot extend the file size, so in this case we want to allocate the
block but do not want to allocate an ioend to enable file size
update at IO completion. Hence we now need to distinguish between
the direct IO patch allocation and dax fault path allocation to
avoid leaking ioend structures.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The iomap codepath (via get_blocks()) acquires and release the inode
lock in the case of a direct write that requires block allocation. This
is because xfs_iomap_write_direct() allocates a transaction, which means
the ilock must be dropped and reacquired after the transaction is
allocated and reserved.
xfs_iomap_write_direct() invokes xfs_iomap_eof_align_last_fsb() before
the transaction is created and thus before the ilock is reacquired. This
can lead to calls to xfs_iread_extents() and reads of the in-core extent
list without any synchronization (via xfs_bmap_eof() and
xfs_bmap_last_extent()). xfs_iread_extents() assert fails if the ilock
is not held, but this is not currently seen in practice as the current
callers had already invoked xfs_bmapi_read().
What has been seen in practice are reports of crashes down in the
xfs_bmap_eof() codepath on direct writes due to seemingly bogus pointer
references from xfs_iext_get_ext(). While an explicit reproducer is not
currently available to confirm the cause of the problem, crash analysis
and code inspection from David Jeffrey had identified the insufficient
locking.
xfs_iomap_eof_align_last_fsb() is called from other contexts with the
inode lock already held, so we cannot acquire it therein.
__xfs_get_blocks() acquires and drops the ilock with variable flags to
cover the event that the extent list must be read in. The common case is
that __xfs_get_blocks() acquires the shared ilock. To provide locking
around the last extent alignment call without adding more lock cycles to
the dio path, update xfs_iomap_write_direct() to expect the shared ilock
held on entry and do the extent alignment under its protection. Demote
the lock, if necessary, from __xfs_get_blocks() and push the
xfs_qm_dqattach() call outside of the shared lock critical section.
Also, add an assert to document that the extent list is always expected
to be present in this path. Otherwise, we risk a call to
xfs_iread_extents() while under the shared ilock. This is safe as all
current callers have executed an xfs_bmapi_read() call under the current
iolock context.
Reported-by: David Jeffery <djeffery@redhat.com>
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When I ran xfstest/073 case, the remount process was blocked to wait
transactions to be zero. I found there was a io error happened, and
the setfilesize transaction was not released properly. We should add
the changes to cancel the io error in this case.
Reproduction steps:
1. dd if=/dev/zero of=xfs1.img bs=1M count=2048
2. mkfs.xfs xfs1.img
3. losetup -f ./xfs1.img /dev/loop0
4. mount -t xfs /dev/loop0 /home/test_dir/
5. mkdir /home/test_dir/test
6. mkfs.xfs -dfile,name=image,size=2g
7. mount -t xfs -o loop image /home/test_dir/test
8. cp a file bigger than 2g to /home/test_dir/test
9. mount -t xfs -o remount,ro /home/test_dir/test
[ dchinner: moved io error detection to xfs_setfilesize_ioend() after
transaction context restoration. ]
Signed-off-by: Zhao Hongjiang <zhaohongjiang@huawei.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
This update contains:
o large rework of EFI/EFD lifecycle handling to fix log recovery corruption
issues, crashes and unmount hangs
o separate metadata UUID on disk to enable changing boot label UUID for v5
filesystems
o fixes for gcc miscompilation on certain platforms and optimisation levels
o remote attribute allocation and recovery corruption fixes
o inode lockdep annotation rework to fix bugs with too many subclasses
o directory inode locking changes to prevent lockdep false positives
o a handful of minor corruption fixes
o various other small cleanups and bug fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=Eikc
-----END PGP SIGNATURE-----
Merge tag 'xfs-for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs
Pull xfs updates from Dave Chinner:
"There isn't a whole lot to this update - it's mostly bug fixes and
they are spread pretty much all over XFS. There are some corruption
fixes, some fixes for log recovery, some fixes that prevent unount
from hanging, a lockdep annotation rework for inode locking to prevent
false positives and the usual random bunch of cleanups and minor
improvements.
Deatils:
- large rework of EFI/EFD lifecycle handling to fix log recovery
corruption issues, crashes and unmount hangs
- separate metadata UUID on disk to enable changing boot label UUID
for v5 filesystems
- fixes for gcc miscompilation on certain platforms and optimisation
levels
- remote attribute allocation and recovery corruption fixes
- inode lockdep annotation rework to fix bugs with too many
subclasses
- directory inode locking changes to prevent lockdep false positives
- a handful of minor corruption fixes
- various other small cleanups and bug fixes"
* tag 'xfs-for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (42 commits)
xfs: fix error gotos in xfs_setattr_nonsize
xfs: add mssing inode cache attempts counter increment
xfs: return errors from partial I/O failures to files
libxfs: bad magic number should set da block buffer error
xfs: fix non-debug build warnings
xfs: collapse allocsize and biosize mount option handling
xfs: Fix file type directory corruption for btree directories
xfs: lockdep annotations throw warnings on non-debug builds
xfs: Fix uninitialized return value in xfs_alloc_fix_freelist()
xfs: inode lockdep annotations broke non-lockdep build
xfs: flush entire file on dio read/write to cached file
xfs: Fix xfs_attr_leafblock definition
libxfs: readahead of dir3 data blocks should use the read verifier
xfs: stop holding ILOCK over filldir callbacks
xfs: clean up inode lockdep annotations
xfs: swap leaf buffer into path struct atomically during path shift
xfs: relocate sparse inode mount warning
xfs: dquots should be stamped with sb_meta_uuid
xfs: log recovery needs to validate against sb_meta_uuid
xfs: growfs not aware of sb_meta_uuid
...
Pull vfs updates from Al Viro:
"In this one:
- d_move fixes (Eric Biederman)
- UFS fixes (me; locking is mostly sane now, a bunch of bugs in error
handling ought to be fixed)
- switch of sb_writers to percpu rwsem (Oleg Nesterov)
- superblock scalability (Josef Bacik and Dave Chinner)
- swapon(2) race fix (Hugh Dickins)"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (65 commits)
vfs: Test for and handle paths that are unreachable from their mnt_root
dcache: Reduce the scope of i_lock in d_splice_alias
dcache: Handle escaped paths in prepend_path
mm: fix potential data race in SyS_swapon
inode: don't softlockup when evicting inodes
inode: rename i_wb_list to i_io_list
sync: serialise per-superblock sync operations
inode: convert inode_sb_list_lock to per-sb
inode: add hlist_fake to avoid the inode hash lock in evict
writeback: plug writeback at a high level
change sb_writers to use percpu_rw_semaphore
shift percpu_counter_destroy() into destroy_super_work()
percpu-rwsem: kill CONFIG_PERCPU_RWSEM
percpu-rwsem: introduce percpu_rwsem_release() and percpu_rwsem_acquire()
percpu-rwsem: introduce percpu_down_read_trylock()
document rwsem_release() in sb_wait_write()
fix the broken lockdep logic in __sb_start_write()
introduce __sb_writers_{acquired,release}() helpers
ufs_inode_get{frag,block}(): get rid of 'phys' argument
ufs_getfrag_block(): tidy up a bit
...
There is an issue with xfs's error reporting in some cases of I/O partially
failing and partially succeeding. Calls like fsync() can report success even
though not all I/O was successful in partial-failure cases such as one disk of
a RAID0 array being offline.
The issue can occur when there are more than one bio per xfs_ioend struct.
Each call to xfs_end_bio() for a bio completing will write a value to
ioend->io_error. If a successful bio completes after any failed bio, no
error is reported do to it writing 0 over the error code set by any failed bio.
The I/O error information is now lost and when the ioend is completed
only success is reported back up the filesystem stack.
xfs_end_bio() should only set ioend->io_error in the case of BIO_UPTODATE
being clear. ioend->io_error is initialized to 0 at allocation so only needs
to be updated by a failed bio. Also check that ioend->io_error is 0 so that
the first error reported will be the error code returned.
Cc: stable@vger.kernel.org
Signed-off-by: David Jeffery <djeffery@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Preparation to hide the sb->s_writers internals from xfs and btrfs.
Add 2 trivial define's they can use rather than play with ->s_writers
directly. No changes in btrfs/transaction.o and xfs/xfs_aops.o.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Reviewed-by: Jan Kara <jack@suse.com>
We can always fill up the bio now, no need to estimate the possible
size based on queue parameters.
Acked-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Kent Overstreet <kent.overstreet@gmail.com>
[hch: rebased and wrote a changelog]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ming Lin <ming.l@ssi.samsung.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Currently we have two different ways to signal an I/O error on a BIO:
(1) by clearing the BIO_UPTODATE flag
(2) by returning a Linux errno value to the bi_end_io callback
The first one has the drawback of only communicating a single possible
error (-EIO), and the second one has the drawback of not beeing persistent
when bios are queued up, and are not passed along from child to parent
bio in the ever more popular chaining scenario. Having both mechanisms
available has the additional drawback of utterly confusing driver authors
and introducing bugs where various I/O submitters only deal with one of
them, and the others have to add boilerplate code to deal with both kinds
of error returns.
So add a new bi_error field to store an errno value directly in struct
bio and remove the existing mechanisms to clean all this up.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: NeilBrown <neilb@suse.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This update contains:
o A new sparse on-disk inode record format to allow small extents to
be used for inode allocation when free space is fragmented.
o DAX support. This includes minor changes to the DAX core code to
fix problems with lock ordering and bufferhead mapping abuse.
o transaction commit interface cleanup
o removal of various unnecessary XFS specific type definitions
o cleanup and optimisation of freelist preparation before allocation
o various minor cleanups
o bug fixes for
- transaction reservation leaks
- incorrect inode logging in unwritten extent conversion
- mmap lock vs freeze ordering
- remote symlink mishandling
- attribute fork removal issues.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=3x+W
-----END PGP SIGNATURE-----
Merge tag 'xfs-for-linus-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs
Pul xfs updates from Dave Chinner:
"There's a couple of small API changes to the core DAX code which
required small changes to the ext2 and ext4 code bases, but otherwise
everything is within the XFS codebase.
This update contains:
- A new sparse on-disk inode record format to allow small extents to
be used for inode allocation when free space is fragmented.
- DAX support. This includes minor changes to the DAX core code to
fix problems with lock ordering and bufferhead mapping abuse.
- transaction commit interface cleanup
- removal of various unnecessary XFS specific type definitions
- cleanup and optimisation of freelist preparation before allocation
- various minor cleanups
- bug fixes for
- transaction reservation leaks
- incorrect inode logging in unwritten extent conversion
- mmap lock vs freeze ordering
- remote symlink mishandling
- attribute fork removal issues"
* tag 'xfs-for-linus-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (49 commits)
xfs: don't truncate attribute extents if no extents exist
xfs: clean up XFS_MIN_FREELIST macros
xfs: sanitise error handling in xfs_alloc_fix_freelist
xfs: factor out free space extent length check
xfs: xfs_alloc_fix_freelist() can use incore perag structures
xfs: remove xfs_caddr_t
xfs: use void pointers in log validation helpers
xfs: return a void pointer from xfs_buf_offset
xfs: remove inst_t
xfs: remove __psint_t and __psunsigned_t
xfs: fix remote symlinks on V5/CRC filesystems
xfs: fix xfs_log_done interface
xfs: saner xfs_trans_commit interface
xfs: remove the flags argument to xfs_trans_cancel
xfs: pass a boolean flag to xfs_trans_free_items
xfs: switch remaining xfs_trans_dup users to xfs_trans_roll
xfs: check min blks for random debug mode sparse allocations
xfs: fix sparse inodes 32-bit compile failure
xfs: add initial DAX support
xfs: add DAX IO path support
...
The flags argument to xfs_trans_commit is not useful for most callers, as
a commit of a transaction without a permanent log reservation must pass
0 here, and all callers for a transaction with a permanent log reservation
except for xfs_trans_roll must pass XFS_TRANS_RELEASE_LOG_RES. So remove
the flags argument from the public xfs_trans_commit interfaces, and
introduce low-level __xfs_trans_commit variant just for xfs_trans_roll
that regrants a log reservation instead of releasing it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs_trans_cancel takes two flags arguments: XFS_TRANS_RELEASE_LOG_RES and
XFS_TRANS_ABORT. Both of them are a direct product of the transaction
state, and can be deducted:
- any dirty transaction needs XFS_TRANS_ABORT to be properly canceled,
and XFS_TRANS_ABORT is a noop for a transaction that is not dirty.
- any transaction with a permanent log reservation needs
XFS_TRANS_RELEASE_LOG_RES to be properly canceled, and passing
XFS_TRANS_RELEASE_LOG_RES for a transaction without a permanent
log reservation is invalid.
So just remove the flags argument and do the right thing.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
DAX does not do buffered IO (can't buffer direct access!) and hence
all read/write IO is vectored through the direct IO path. Hence we
need to add the DAX IO path callouts to the direct IO
infrastructure.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Add the initial support for DAX file operations to XFS. This
includes the necessary block allocation and mmap page fault hooks
for DAX to function.
Note that there are changes to the splice interfaces to ensure that
for DAX splice avoids direct page cache manipulations and instead
takes the DAX IO paths for read/write operations.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When modifying PG_Dirty on cached file pages, update the new
MEM_CGROUP_STAT_DIRTY counter. This is done in the same places where
global NR_FILE_DIRTY is managed. The new memcg stat is visible in the
per memcg memory.stat cgroupfs file. The most recent past attempt at
this was http://thread.gmane.org/gmane.linux.kernel.cgroups/8632
The new accounting supports future efforts to add per cgroup dirty
page throttling and writeback. It also helps an administrator break
down a container's memory usage and provides evidence to understand
memcg oom kills (the new dirty count is included in memcg oom kill
messages).
The ability to move page accounting between memcg
(memory.move_charge_at_immigrate) makes this accounting more
complicated than the global counter. The existing
mem_cgroup_{begin,end}_page_stat() lock is used to serialize move
accounting with stat updates.
Typical update operation:
memcg = mem_cgroup_begin_page_stat(page)
if (TestSetPageDirty()) {
[...]
mem_cgroup_update_page_stat(memcg)
}
mem_cgroup_end_page_stat(memcg)
Summary of mem_cgroup_end_page_stat() overhead:
- Without CONFIG_MEMCG it's a no-op
- With CONFIG_MEMCG and no inter memcg task movement, it's just
rcu_read_lock()
- With CONFIG_MEMCG and inter memcg task movement, it's
rcu_read_lock() + spin_lock_irqsave()
A memcg parameter is added to several routines because their callers
now grab mem_cgroup_begin_page_stat() which returns the memcg later
needed by for mem_cgroup_update_page_stat().
Because mem_cgroup_begin_page_stat() may disable interrupts, some
adjustments are needed:
- move __mark_inode_dirty() from __set_page_dirty() to its caller.
__mark_inode_dirty() locking does not want interrupts disabled.
- use spin_lock_irqsave(tree_lock) rather than spin_lock_irq() in
__delete_from_page_cache(), replace_page_cache_page(),
invalidate_complete_page2(), and __remove_mapping().
text data bss dec hex filename
8925147 1774832 1785856 12485835 be84cb vmlinux-!CONFIG_MEMCG-before
8925339 1774832 1785856 12486027 be858b vmlinux-!CONFIG_MEMCG-after
+192 text bytes
8965977 1784992 1785856 12536825 bf4bf9 vmlinux-CONFIG_MEMCG-before
8966750 1784992 1785856 12537598 bf4efe vmlinux-CONFIG_MEMCG-after
+773 text bytes
Performance tests run on v4.0-rc1-36-g4f671fe2f952. Lower is better for
all metrics, they're all wall clock or cycle counts. The read and write
fault benchmarks just measure fault time, they do not include I/O time.
* CONFIG_MEMCG not set:
baseline patched
kbuild 1m25.030000(+-0.088% 3 samples) 1m25.426667(+-0.120% 3 samples)
dd write 100 MiB 0.859211561 +-15.10% 0.874162885 +-15.03%
dd write 200 MiB 1.670653105 +-17.87% 1.669384764 +-11.99%
dd write 1000 MiB 8.434691190 +-14.15% 8.474733215 +-14.77%
read fault cycles 254.0(+-0.000% 10 samples) 253.0(+-0.000% 10 samples)
write fault cycles 2021.2(+-3.070% 10 samples) 1984.5(+-1.036% 10 samples)
* CONFIG_MEMCG=y root_memcg:
baseline patched
kbuild 1m25.716667(+-0.105% 3 samples) 1m25.686667(+-0.153% 3 samples)
dd write 100 MiB 0.855650830 +-14.90% 0.887557919 +-14.90%
dd write 200 MiB 1.688322953 +-12.72% 1.667682724 +-13.33%
dd write 1000 MiB 8.418601605 +-14.30% 8.673532299 +-15.00%
read fault cycles 266.0(+-0.000% 10 samples) 266.0(+-0.000% 10 samples)
write fault cycles 2051.7(+-1.349% 10 samples) 2049.6(+-1.686% 10 samples)
* CONFIG_MEMCG=y non-root_memcg:
baseline patched
kbuild 1m26.120000(+-0.273% 3 samples) 1m25.763333(+-0.127% 3 samples)
dd write 100 MiB 0.861723964 +-15.25% 0.818129350 +-14.82%
dd write 200 MiB 1.669887569 +-13.30% 1.698645885 +-13.27%
dd write 1000 MiB 8.383191730 +-14.65% 8.351742280 +-14.52%
read fault cycles 265.7(+-0.172% 10 samples) 267.0(+-0.000% 10 samples)
write fault cycles 2070.6(+-1.512% 10 samples) 2084.4(+-2.148% 10 samples)
As expected anon page faults are not affected by this patch.
tj: Updated to apply on top of the recent cancel_dirty_page() changes.
Signed-off-by: Sha Zhengju <handai.szj@gmail.com>
Signed-off-by: Greg Thelen <gthelen@google.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
Struct bio has a reference count that controls when it can be freed.
Most uses cases is allocating the bio, which then returns with a
single reference to it, doing IO, and then dropping that single
reference. We can remove this atomic_dec_and_test() in the completion
path, if nobody else is holding a reference to the bio.
If someone does call bio_get() on the bio, then we flag the bio as
now having valid count and that we must properly honor the reference
count when it's being put.
Tested-by: Robert Elliott <elliott@hp.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This update contains:
o RENAME_WHITEOUT support
o conversion of per-cpu superblock accounting to use generic counters
o new inode mmap lock so that we can lock page faults out of truncate, hole
punch and other direct extent manipulation functions to avoid racing mmap
writes from causing data corruption
o rework of direct IO submission and completion to solve data corruption issue
when running concurrent extending DIO writes. Also solves problem of running
IO completion transactions in interrupt context during size extending AIO
writes.
o FALLOC_FL_INSERT_RANGE support for inserting holes into a file via direct
extent manipulation to avoid needing to copy data within the file
o attribute block header field overflow fix for 64k block size filesystems
o Lots of changes to log messaging to be more informative and concise when
errors occur. Also prevent a lot of unnecessary log spamming due to cascading
failures in error conditions.
o lots of cleanups and bug fixes
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)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=WE6f
-----END PGP SIGNATURE-----
Merge tag 'xfs-for-linus-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs
Pull xfs update from Dave Chinner:
"This update contains:
- RENAME_WHITEOUT support
- conversion of per-cpu superblock accounting to use generic counters
- new inode mmap lock so that we can lock page faults out of
truncate, hole punch and other direct extent manipulation functions
to avoid racing mmap writes from causing data corruption
- rework of direct IO submission and completion to solve data
corruption issue when running concurrent extending DIO writes.
Also solves problem of running IO completion transactions in
interrupt context during size extending AIO writes.
- FALLOC_FL_INSERT_RANGE support for inserting holes into a file via
direct extent manipulation to avoid needing to copy data within the
file
- attribute block header field overflow fix for 64k block size
filesystems
- Lots of changes to log messaging to be more informative and concise
when errors occur. Also prevent a lot of unnecessary log spamming
due to cascading failures in error conditions.
- lots of cleanups and bug fixes
One thing of note is the direct IO fixes that we merged last week
after the window opened. Even though a little late, they fix a user
reported data corruption and have been pretty well tested. I figured
there was not much point waiting another 2 weeks for -rc1 to be
released just so I could send them to you..."
* tag 'xfs-for-linus-4.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (49 commits)
xfs: using generic_file_direct_write() is unnecessary
xfs: direct IO EOF zeroing needs to drain AIO
xfs: DIO write completion size updates race
xfs: DIO writes within EOF don't need an ioend
xfs: handle DIO overwrite EOF update completion correctly
xfs: DIO needs an ioend for writes
xfs: move DIO mapping size calculation
xfs: factor DIO write mapping from get_blocks
xfs: unlock i_mutex in xfs_break_layouts
xfs: kill unnecessary firstused overflow check on attr3 leaf removal
xfs: use larger in-core attr firstused field and detect overflow
xfs: pass attr geometry to attr leaf header conversion functions
xfs: disallow ro->rw remount on norecovery mount
xfs: xfs_shift_file_space can be static
xfs: Add support FALLOC_FL_INSERT_RANGE for fallocate
fs: Add support FALLOC_FL_INSERT_RANGE for fallocate
xfs: Fix incorrect positive ENOMEM return
xfs: xfs_mru_cache_insert() should use GFP_NOFS
xfs: %pF is only for function pointers
xfs: fix shadow warning in xfs_da3_root_split()
...
xfs_end_io_direct_write() can race with other IO completions when
updating the in-core inode size. The IO completion processing is not
serialised for direct IO - they are done either under the
IOLOCK_SHARED for non-AIO DIO, and without any IOLOCK held at all
during AIO DIO completion. Hence the non-atomic test-and-set update
of the in-core inode size is racy and can result in the in-core
inode size going backwards if the race if hit just right.
If the inode size goes backwards, this can trigger the EOF zeroing
code to run incorrectly on the next IO, which then will zero data
that has successfully been written to disk by a previous DIO.
To fix this bug, we need to serialise the test/set updates of the
in-core inode size. This first patch introduces locking around the
relevant updates and checks in the DIO path. Because we now have an
ioend in xfs_end_io_direct_write(), we know exactly then we are
doing an IO that requires an in-core EOF update, and we know that
they are not running in interrupt context. As such, we do not need to
use irqsave() spinlock variants to protect against interrupts while
the lock is held.
Hence we can use an existing spinlock in the inode to do this
serialisation and so not need to grow the struct xfs_inode just to
work around this problem.
This patch does not address the test/set EOF update in
generic_file_write_direct() for various reasons - that will be done
as a followup with separate explanation.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
DIO writes that lie entirely within EOF have nothing to do in IO
completion. In this case, we don't need no steekin' ioend, and so we
can avoid allocating an ioend until we have a mapping that spans
EOF.
This means that IO completion has two contexts - deferred completion
to the dio workqueue that uses an ioend, and interrupt completion
that does nothing because there is nothing that can be done in this
context.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Currently a DIO overwrite that extends the EOF (e.g sub-block IO or
write into allocated blocks beyond EOF) requires a transaction for
the EOF update. Thi is done in IO completion context, but we aren't
explicitly handling this situation properly and so it can run in
interrupt context. Ensure that we defer IO that spans EOF correctly
to the DIO completion workqueue, and now that we have an ioend in IO
completion we can use the common ioend completion path to do all the
work.
Note: we do not preallocate the append transaction as we can have
multiple mapping and allocation calls per direct IO. hence
preallocating can still leave us with nested transactions by
attempting to map and allocate more blocks after we've preallocated
an append transaction.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Currently we can only tell DIO completion that an IO requires
unwritten extent completion. This is done by a hacky non-null
private pointer passed to Io completion, but the private pointer
does not actually contain any information that is used.
We also need to pass to IO completion the fact that the IO may be
beyond EOF and so a size update transaction needs to be done. This
is currently determined by checks in the io completion, but we need
to determine if this is necessary at block mapping time as we need
to defer the size update transactions to a completion workqueue,
just like unwritten extent conversion.
To do this, first we need to allocate and pass an ioend to to IO
completion. Add this for unwritten extent conversion; we'll do the
EOF updates in the next commit.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The mapping size calculation is done last in __xfs_get_blocks(), but
we are going to need the actual mapping size we will use to map the
direct IO correctly in xfs_map_direct(). Factor out the calculation
for code clarity, and move the call to be the first operation in
mapping the extent to the returned buffer.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Clarify and separate the buffer mapping logic so that the direct IO mapping is
not tangled up in propagating the extent status to teh mapping buffer. This
makes it easier to extend the direct IO mapping to use an ioend in future.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
The rw parameter to direct_IO is redundant with iov_iter->type, and
treated slightly differently just about everywhere it's used: some users
do rw & WRITE, and others do rw == WRITE where they should be doing a
bitwise check. Simplify this with the new iov_iter_rw() helper, which
always returns either READ or WRITE.
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Most filesystems call through to these at some point, so we'll start
here.
Signed-off-by: Omar Sandoval <osandov@osandov.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
struct kiocb now is a generic I/O container, so move it to fs.h.
Also do a #include diet for aio.h while we're at it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Back in the days when the direct I/O ->end_io callback could be called
from interrupt context for AIO we needed a structure to hand off to the
workqueue, and reused the ioend structure for this purpose. These days
->end_io is always called from user or workqueue context, which allows us
to avoid this memory allocation and simplify the code significantly.
[dchinner: removed now unused xfs_finish_ioend_sync() function after
Brian Foster did an initial review. ]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
More on-disk format consolidation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
More on-disk format consolidation. A few declarations that weren't on-disk
format related move into better suitable spots.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
More consolidatation for the on-disk format defintions. Note that the
XFS_IS_REALTIME_INODE moves to xfs_linux.h instead as it is not related
to the on disk format, but depends on a CONFIG_ option.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs_vm_writepage() walks each buffer_head on the page, maps to the block
on disk and attaches to a running ioend structure that represents the
I/O submission. A new ioend is created when the type of I/O (unwritten,
delayed allocation or overwrite) required for a particular buffer_head
differs from the previous. If a buffer_head is a delalloc or unwritten
buffer, the associated bits are cleared by xfs_map_at_offset() once the
buffer_head is added to the ioend.
The process of mapping each buffer_head occurs in xfs_map_blocks() and
acquires the ilock in blocking or non-blocking mode, depending on the
type of writeback in progress. If the lock cannot be acquired for
non-blocking writeback, we cancel the ioend, redirty the page and
return. Writeback will revisit the page at some later point.
Note that we acquire the ilock for each buffer on the page. Therefore
during non-blocking writeback, it is possible to add an unwritten buffer
to the ioend, clear the unwritten state, fail to acquire the ilock when
mapping a subsequent buffer and cancel the ioend. If this occurs, the
unwritten status of the buffer sitting in the ioend has been lost. The
page will eventually hit writeback again, but xfs_vm_writepage() submits
overwrite I/O instead of unwritten I/O and does not perform unwritten
extent conversion at I/O completion. This leads to data corruption
because unwritten extents are treated as holes on reads and zeroes are
returned instead of reading from disk.
Modify xfs_cancel_ioend() to restore the buffer unwritten bit for ioends
of type XFS_IO_UNWRITTEN. This ensures that unwritten extent conversion
occurs once the page is eventually written back.
Signed-off-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
XFS has been having trouble with stray delayed allocation extents
beyond EOF for a long time. Recent changes to the collapse range
code has triggered erroneous EBUSY errors on page invalidtion for
block size smaller than page size filesystems. These
have been caused by dirty buffers beyond EOF on a partial page which
do not get written to disk during a sync.
The issue is that write-ahead in xfs_cluster_write() finds such a
partial page and handles it by leaving the page dirty but pushing it
into a writeback state. This used to work just fine, as the
write_cache_pages() code would then find the dirty partial page in
the next mapping tree lookup as the dirty tag is still set.
Unfortunately, when we moved to a mark and sweep approach to
writeback to fix other writeback sync issues, we broken this. THe
act of marking the page as under writeback now clears the TOWRITE
tag in the radix tree, even though the page is still dirty. This
causes the TOWRITE tag to be cleared, and hence the next lookup on
the mapping tree does not find the dirty partial page and so doesn't
try to write it again.
This same writeback bug was found recently in ext4 and fixed in
commit 1c8349a ("ext4: fix data integrity sync in ordered mode")
without communication to the wider filesystem community. We can use
exactly the same fix here so the TOWRITE flag is not cleared on
partial page writes.
cc: stable@vger.kernel.org # dependent on 1c8349a171
Root-cause-found-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
generic/263 is failing fsx at this point with a page spanning
EOF that cannot be invalidated. The operations are:
1190 mapwrite 0x52c00 thru 0x5e569 (0xb96a bytes)
1191 mapread 0x5c000 thru 0x5d636 (0x1637 bytes)
1192 write 0x5b600 thru 0x771ff (0x1bc00 bytes)
where 1190 extents EOF from 0x54000 to 0x5e569. When the direct IO
write attempts to invalidate the cached page over this range, it
fails with -EBUSY and so any attempt to do page invalidation fails.
The real question is this: Why can't that page be invalidated after
it has been written to disk and cleaned?
Well, there's data on the first two buffers in the page (1k block
size, 4k page), but the third buffer on the page (i.e. beyond EOF)
is failing drop_buffers because it's bh->b_state == 0x3, which is
BH_Uptodate | BH_Dirty. IOWs, there's dirty buffers beyond EOF. Say
what?
OK, set_buffer_dirty() is called on all buffers from
__set_page_buffers_dirty(), regardless of whether the buffer is
beyond EOF or not, which means that when we get to ->writepage,
we have buffers marked dirty beyond EOF that we need to clean.
So, we need to implement our own .set_page_dirty method that
doesn't dirty buffers beyond EOF.
This is messy because the buffer code is not meant to be shared
and it has interesting locking issues on the buffer dirty bits.
So just copy and paste it and then modify it to suit what we need.
Note: the solutions the other filesystems and generic block code use
of marking the buffers clean in ->writepage does not work for XFS.
It still leaves dirty buffers beyond EOF and invalidations still
fail. Hence rather than play whack-a-mole, this patch simply
prevents those buffers from being dirtied in the first place.
cc: <stable@kernel.org>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Convert all the errors the core XFs code to negative error signs
like the rest of the kernel and remove all the sign conversion we
do in the interface layers.
Errors for conversion (and comparison) found via searches like:
$ git grep " E" fs/xfs
$ git grep "return E" fs/xfs
$ git grep " E[A-Z].*;$" fs/xfs
Negation points found via searches like:
$ git grep "= -[a-z,A-Z]" fs/xfs
$ git grep "return -[a-z,A-D,F-Z]" fs/xfs
$ git grep " -[a-z].*;" fs/xfs
[ with some bits I missed from Brian Foster ]
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
XFS_ERROR was designed long ago to trap return values, but it's not
runtime configurable, it's not consistently used, and we can do
similar error trapping with ftrace scripts and triggers from
userspace.
Just nuke XFS_ERROR and associated bits.
Signed-off-by: Eric Sandeen <sandeen@redhat.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Pull vfs updates from Al Viro:
"This the bunch that sat in -next + lock_parent() fix. This is the
minimal set; there's more pending stuff.
In particular, I really hope to get acct.c fixes merged this cycle -
we need that to deal sanely with delayed-mntput stuff. In the next
pile, hopefully - that series is fairly short and localized
(kernel/acct.c, fs/super.c and fs/namespace.c). In this pile: more
iov_iter work. Most of prereqs for ->splice_write with sane locking
order are there and Kent's dio rewrite would also fit nicely on top of
this pile"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (70 commits)
lock_parent: don't step on stale ->d_parent of all-but-freed one
kill generic_file_splice_write()
ceph: switch to iter_file_splice_write()
shmem: switch to iter_file_splice_write()
nfs: switch to iter_splice_write_file()
fs/splice.c: remove unneeded exports
ocfs2: switch to iter_file_splice_write()
->splice_write() via ->write_iter()
bio_vec-backed iov_iter
optimize copy_page_{to,from}_iter()
bury generic_file_aio_{read,write}
lustre: get rid of messing with iovecs
ceph: switch to ->write_iter()
ceph_sync_direct_write: stop poking into iov_iter guts
ceph_sync_read: stop poking into iov_iter guts
new helper: copy_page_from_iter()
fuse: switch to ->write_iter()
btrfs: switch to ->write_iter()
ocfs2: switch to ->write_iter()
xfs: switch to ->write_iter()
...
I recently ran into the issue fixed by
"xfs: kill buffers over failed write ranges properly"
which spams the log with lots of backtraces. Make debugging any
issues like that easier by using WARN_ON_ONCE in the writeback code.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Write to a file with an offset greater than 16TB on 32-bit system and
then trigger page write-back via sync(1) will cause task hang.
# block_size=4096
# offset=$(((2**32 - 1) * $block_size))
# xfs_io -f -c "pwrite $offset $block_size" /storage/test_file
# sync
INFO: task sync:2590 blocked for more than 120 seconds.
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
sync D c1064a28 0 2590 2097 0x00000000
.....
Call Trace:
[<c1064a28>] ? ttwu_do_wakeup+0x18/0x130
[<c1066d0e>] ? try_to_wake_up+0x1ce/0x220
[<c1066dbf>] ? wake_up_process+0x1f/0x40
[<c104fc2e>] ? wake_up_worker+0x1e/0x30
[<c15b6083>] schedule+0x23/0x60
[<c15b3c2d>] schedule_timeout+0x18d/0x1f0
[<c12a143e>] ? do_raw_spin_unlock+0x4e/0x90
[<c10515f1>] ? __queue_delayed_work+0x91/0x150
[<c12a12ef>] ? do_raw_spin_lock+0x3f/0x100
[<c12a143e>] ? do_raw_spin_unlock+0x4e/0x90
[<c15b5b5d>] wait_for_completion+0x7d/0xc0
[<c1066d60>] ? try_to_wake_up+0x220/0x220
[<c116a4d2>] sync_inodes_sb+0x92/0x180
[<c116fb05>] sync_inodes_one_sb+0x15/0x20
[<c114a8f8>] iterate_supers+0xb8/0xc0
[<c116faf0>] ? fdatawrite_one_bdev+0x20/0x20
[<c116fc21>] sys_sync+0x31/0x80
[<c15be18d>] sysenter_do_call+0x12/0x28
This issue can be triggered via xfstests/generic/308.
The reason is that the end_index is unsigned long with maximum value
'2^32-1=4294967295' on 32-bit platform, and the given offset cause it
wrapped to 0, so that the following codes will repeat again and again
until the task schedule time out:
end_index = offset >> PAGE_CACHE_SHIFT;
last_index = (offset - 1) >> PAGE_CACHE_SHIFT;
if (page->index >= end_index) {
unsigned offset_into_page = offset & (PAGE_CACHE_SIZE - 1);
/*
* Just skip the page if it is fully outside i_size, e.g. due
* to a truncate operation that is in progress.
*/
if (page->index >= end_index + 1 || offset_into_page == 0) {
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
unlock_page(page);
return 0;
}
In order to check if a page is fully outsids i_size or not, we can fix
the code logic as below:
if (page->index > end_index ||
(page->index == end_index && offset_into_page == 0))
Secondly, there still has another similar issue when calculating the
end offset for mapping the filesystem blocks to the file blocks for
delalloc. With the same tests to above, run unmount(8) will cause
kernel panic if CONFIG_XFS_DEBUG is enabled:
XFS: Assertion failed: XFS_FORCED_SHUTDOWN(ip->i_mount) || \
ip->i_delayed_blks == 0, file: fs/xfs/xfs_super.c, line: 964
kernel BUG at fs/xfs/xfs_message.c:108!
invalid opcode: 0000 [#1] SMP
task: edddc100 ti: ec6ee000 task.ti: ec6ee000
EIP: 0060:[<f83d87cb>] EFLAGS: 00010296 CPU: 1
EIP is at assfail+0x2b/0x30 [xfs]
..............
Call Trace:
[<f83d9cd4>] xfs_fs_destroy_inode+0x74/0x120 [xfs]
[<c115ddf1>] destroy_inode+0x31/0x50
[<c115deff>] evict+0xef/0x170
[<c115dfb2>] dispose_list+0x32/0x40
[<c115ea3a>] evict_inodes+0xca/0xe0
[<c1149706>] generic_shutdown_super+0x46/0xd0
[<c11497b9>] kill_block_super+0x29/0x70
[<c1149a14>] deactivate_locked_super+0x44/0x70
[<c114a427>] deactivate_super+0x47/0x60
[<c1161c3d>] mntput_no_expire+0xcd/0x120
[<c1162ae8>] SyS_umount+0xa8/0x370
[<c1162dce>] SyS_oldumount+0x1e/0x20
[<c15be18d>] sysenter_do_call+0x12/0x28
That because the end_offset is evaluated to 0 which is the same reason
to above, hence the mapping and covertion for dealloc file blocks to
file system blocks did not happened.
This patch just fixed both issues.
Reported-by: Michael L. Semon <mlsemon35@gmail.com>
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Al Viro tracked down the problem that has caused generic/263 to fail
on XFS since the test was introduced. If is caused by
xfs_get_blocks() mapping a single extent that spans EOF without
marking it as buffer-new() so that the direct IO code does not zero
the tail of the block at the new EOF. This is a long standing bug
that has been around for many, many years.
Because xfs_get_blocks() starts the map before EOF, it can't set
buffer_new(), because that causes he direct IO code to also zero
unaligned sectors at the head of the IO. This would overwrite valid
data with zeros, and hence we cannot validly return a single extent
that spans EOF to direct IO.
Fix this by detecting a mapping that spans EOF and truncate it down
to EOF. This results in the the direct IO code doing the right thing
for unaligned data blocks before EOF, and then returning to get
another mapping for the region beyond EOF which XFS treats correctly
by setting buffer_new() on it. This makes direct Io behave correctly
w.r.t. tail block zeroing beyond EOF, and fsx is happy about that.
Again, thanks to Al Viro for finding what I couldn't.
[ dchinner: Fix for __divdi3 build error:
Reported-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Mark Tinguely <tinguely@sgi.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
]
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Tested-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Similar to the write_begin problem, xfs-vm_write_end will truncate
back to the old EOF, potentially removing page cache from over the
top of delalloc blocks with valid data in them. Fix this by
truncating back to just the start of the failed write.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Tested-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
If we fail a write beyond EOF and have to handle it in
xfs_vm_write_begin(), we truncate the inode back to the current inode
size. This doesn't take into account the fact that we may have
already made successful writes to the same page (in the case of block
size < page size) and hence we can truncate the page cache away from
blocks with valid data in them. If these blocks are delayed
allocation blocks, we now have a mismatch between the page cache and
the extent tree, and this will trigger - at minimum - a delayed
block count mismatch assert when the inode is evicted from the cache.
We can also trip over it when block mapping for direct IO - this is
the most common symptom seen from fsx and fsstress when run from
xfstests.
Fix it by only truncating away the exact range we are updating state
for in this write_begin call.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Tested-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
When a write fails, if we don't clear the delalloc flags from the
buffers over the failed range, they can persist beyond EOF and cause
problems. writeback will see the pages in the page cache, see they
are dirty and continually retry the write, assuming that the page
beyond EOF is just racing with a truncate. The page will eventually
be released due to some other operation (e.g. direct IO), and it
will not pass through invalidation because it is dirty. Hence it
will be released with buffer_delay set on it, and trigger warnings
in xfs_vm_releasepage() and assert fail in xfs_file_aio_write_direct
because invalidation failed and we didn't write the corect amount.
This causes failures on block size < page size filesystems in fsx
and fsstress workloads run by xfstests.
Fix it by completely trashing any state on the buffer that could be
used to imply that it contains valid data when the delalloc range
over the buffer is punched out during the failed write handling.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Tested-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
There were some extra semi-colons here which mean that we return true
unintentionally.
Fixes: a49935f200 ('xfs: xfs_check_page_type buffer checks need help')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Eric Sandeen <sandeen@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
xfs_aops_discard_page() was introduced in the following commit:
xfs: truncate delalloc extents when IO fails in writeback
... to clean up left over delalloc ranges after I/O failure in
->writepage(). generic/224 tests for this scenario and occasionally
reproduces panics on sub-4k blocksize filesystems.
The cause of this is failure to clean up the delalloc range on a
page where the first buffer does not match one of the expected
states of xfs_check_page_type(). If a buffer is not unwritten,
delayed or dirty&mapped, xfs_check_page_type() stops and
immediately returns 0.
The stress test of generic/224 creates a scenario where the first
several buffers of a page with delayed buffers are mapped & uptodate
and some subsequent buffer is delayed. If the ->writepage() happens
to fail for this page, xfs_aops_discard_page() incorrectly skips
the entire page.
This then causes later failures either when direct IO maps the range
and finds the stale delayed buffer, or we evict the inode and find
that the inode still has a delayed block reservation accounted to
it.
We can easily fix this xfs_aops_discard_page() failure by making
xfs_check_page_type() check all buffers, but this breaks
xfs_convert_page() more than it is already broken. Indeed,
xfs_convert_page() wants xfs_check_page_type() to tell it if the
first buffers on the pages are of a type that can be aggregated into
the contiguous IO that is already being built.
xfs_convert_page() should not be writing random buffers out of a
page, but the current behaviour will cause it to do so if there are
buffers that don't match the current specification on the page.
Hence for xfs_convert_page() we need to:
a) return "not ok" if the first buffer on the page does not
match the specification provided to we don't write anything;
and
b) abort it's buffer-add-to-io loop the moment we come
across a buffer that does not match the specification.
Hence we need to fix both xfs_check_page_type() and
xfs_convert_page() to work correctly with pages that have mixed
buffer types, whilst allowing xfs_aops_discard_page() to scan all
buffers on the page for a type match.
Reported-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
XFS can easily support appending aio writes by ensuring we always allocate
blocks as unwritten extents when performing direct I/O writes and only
converting them to written extents at I/O completion.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Pull core block IO changes from Jens Axboe:
"The major piece in here is the immutable bio_ve series from Kent, the
rest is fairly minor. It was supposed to go in last round, but
various issues pushed it to this release instead. The pull request
contains:
- Various smaller blk-mq fixes from different folks. Nothing major
here, just minor fixes and cleanups.
- Fix for a memory leak in the error path in the block ioctl code
from Christian Engelmayer.
- Header export fix from CaiZhiyong.
- Finally the immutable biovec changes from Kent Overstreet. This
enables some nice future work on making arbitrarily sized bios
possible, and splitting more efficient. Related fixes to immutable
bio_vecs:
- dm-cache immutable fixup from Mike Snitzer.
- btrfs immutable fixup from Muthu Kumar.
- bio-integrity fix from Nic Bellinger, which is also going to stable"
* 'for-3.14/core' of git://git.kernel.dk/linux-block: (44 commits)
xtensa: fixup simdisk driver to work with immutable bio_vecs
block/blk-mq-cpu.c: use hotcpu_notifier()
blk-mq: for_each_* macro correctness
block: Fix memory leak in rw_copy_check_uvector() handling
bio-integrity: Fix bio_integrity_verify segment start bug
block: remove unrelated header files and export symbol
blk-mq: uses page->list incorrectly
blk-mq: use __smp_call_function_single directly
btrfs: fix missing increment of bi_remaining
Revert "block: Warn and free bio if bi_end_io is not set"
block: Warn and free bio if bi_end_io is not set
blk-mq: fix initializing request's start time
block: blk-mq: don't export blk_mq_free_queue()
block: blk-mq: make blk_sync_queue support mq
block: blk-mq: support draining mq queue
dm cache: increment bi_remaining when bi_end_io is restored
block: fixup for generic bio chaining
block: Really silence spurious compiler warnings
block: Silence spurious compiler warnings
block: Kill bio_pair_split()
...
Make it clear that we're only locking against the extent map on the data
fork. Also clean the function up a little bit.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
Page cache allocation doesn't always go through ->begin_write and
hence we don't always get the opportunity to set the allocation
context to GFP_NOFS. Failing to do this means we open up the direct
relcaim stack to recurse into the filesystem and consume a
significant amount of stack.
On RHEL6.4 kernels we are seeing ra_submit() and
generic_file_splice_read() from an nfsd context recursing into the
filesystem via the inode cache shrinker and evicting inodes. This is
causing truncation to be run (e.g EOF block freeing) and causing
bmap btree block merges and free space btree block splits to occur.
These btree manipulations are occurring with the call chain already
30 functions deep and hence there is not enough stack space to
complete such operations.
To avoid these specific overruns, we need to prevent the page cache
allocation from recursing via direct reclaim. We can do that because
the allocation functions take the allocation context from that which
is stored in the mapping for the inode. We don't set that right now,
so the default is GFP_HIGHUSER_MOVABLE, which is effectively a
GFP_KERNEL context. We need it to be the equivalent of GFP_NOFS, so
when we initialise an inode, set the mapping gfp mask appropriately.
This makes the use of AOP_FLAG_NOFS redundant from other parts of
the XFS IO path, so get rid of it.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
Currently the xfs_inode.h header has a dependency on the definition
of the BMAP btree records as the inode fork includes an array of
xfs_bmbt_rec_host_t objects in it's definition.
Move all the btree format definitions from xfs_btree.h,
xfs_bmap_btree.h, xfs_alloc_btree.h and xfs_ialloc_btree.h to
xfs_format.h to continue the process of centralising the on-disk
format definitions. With this done, the xfs inode definitions are no
longer dependent on btree header files.
The enables a massive culling of unnecessary includes, with close to
200 #include directives removed from the XFS kernel code base.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
xfs_trans.h has a dependency on xfs_log.h for a couple of
structures. Most code that does transactions doesn't need to know
anything about the log, but this dependency means that they have to
include xfs_log.h. Decouple the xfs_trans.h and xfs_log.h header
files and clean up the includes to be in dependency order.
In doing this, remove the direct include of xfs_trans_reserve.h from
xfs_trans.h so that we remove the dependency between xfs_trans.h and
xfs_mount.h. Hence the xfs_trans.h include can be moved to the
indicate the actual dependencies other header files have on it.
Note that these are kernel only header files, so this does not
translate to any userspace changes at all.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Ben Myers <bpm@sgi.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
All of the buffer operations structures are needed to be exported
for xfs_db, so move them all to a common location rather than
spreading them all over the place. They are verifying the on-disk
format, so while xfs_format.h might be a good place, it is not part
of the on disk format.
Hence we need to create a new header file that we centralise these
related definitions. Start by moving the bffer operations
structures, and then also move all the other definitions that have
crept into xfs_log_format.h and xfs_format.h as there was no other
shared header file to put them in.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Ben Myers <bpm@sgi.com>
Get rid of function variable count from xfs_iomap_write_allocate() as
it is unused.
Additionally, checkpatch warn me of the following for this change:
WARNING: extern prototypes should be avoided in .h files
+extern int xfs_iomap_write_allocate(struct xfs_inode *, xfs_off_t,
So this patch also remove all extern function prototypes at xfs_iomap.h
to suppress it to make this code style in consistent manner in this file.
Signed-off-by: Jie Liu <jeff.liu@oracle.com>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Ben Myers <bpm@sgi.com>
truncate_pagecache() doesn't care about old size since commit
cedabed49b ("vfs: Fix vmtruncate() regression"). Let's drop it.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Brian Foster
Dave Chinner
Eryu Guan
Linus Torvalds
Christoph Hellwig
Dan Williams
Jens Axboe
Darrick J. Wong
Michal Hocko
Fabian Frederick
Jan Kara
Dave Chinner
Ross Zwisler
Jens Axboe
Mike Christie
Kirill A. Shutemov
Johannes Weiner
Zhaohongjiang
David Jeffery
Oleg Nesterov
Kent Overstreet
Greg Thelen
Omar Sandoval
Eric Sandeen
Christoph Hellwig
Jie Liu
Al Viro
Dan Carpenter
Kent Overstreet